PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
|
|
- Timothy Singleton
- 5 years ago
- Views:
Transcription
1 02 PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
2 PIN VICES i Pin vices are used to firmly hold items such as winding stems, cutting and smoothing broaches, drills, taps, wires, screws, etc. Choosing a square or hexagonal head model will assure you a tighter fit. Pin vice with fluted hollow brass handle and square head to prevent rolling on bench. Delivered with 2 steel chucks * * * * * In assortment MSA MSA Assortment of 4 pin vices MSA , -04, -06 and -08. Delivered in 1 plastic pouch Pin vice with fluted hollow nickel-plated handle and square head to prevent rolling on bench. Provided with 2 steel chucks TOOLS 2016
3 PIN VICES Pin vice with fluted hollow brass handle and round head. Provided with 2 steel chucks Pin vice with fluted hollow brass, thin handle and round head Ø 5 mm Pin vice with fluted hollow brass handle and round head Thin pin vice with conical and fluted brass handle and round head Double-ended pin vice with fluted nickel-plated handle and 2 round heads. Provided with 2 steel 4-lip chucks Double-ended pin vice with fluted hollow nickel-plated handle and 2 knurled round heads. Provided with 2 steel 4-lip chucks. TOOLS
4 PIN VICES * * See assortment MSA Thin pin vice with conical fluted nickel-plated handle and round head * * * See assortment MSA Pin vice with fluted hollow nickel-plated handle and round head. Provided with 2 steel chucks. MSA Assortment of 3 pin vices with fluted hollow nickel-plated handles and round heads. Contents : MSA02.016, and Delivered in 1 plastic pouch Ø 6 mm Pin vice with fluted hollow nickel-plated handle ø 6 mm and round head Ø 7 mm Pin vice with fluted hollow nickel-plated handle ø 7 mm and round head Ø 2.35 mm Pin vice with black finished adapter and round head. For manual use on a lathe or a drilling machine TOOLS 2016
5 PIN VICES Mini cutting broaches holder pin vice with knurled hollow handle made of black steel and round head Mini cutting broaches holder pin vice with fluted hollow handle made of aluminium. MSA Model Tightening mm Long. mm Medium Large Ø 2.35 mm Pin vice with black finished adapter and round head. For manual use on a lathe or a drilling machine. Delivered with 3 interchangeable steel chucks Double-ended pin vice with fluted hollow nickel-plated handle and 2 hexagonal heads to prevent rolling on bench. Provided with 2 steel 4-lip chucks. TOOLS
6 PIN VICES MSA Length mm Forked pin vice with knurled nickel-plated handle. Provided with a sliding locker for an easy and quick tightening with one hand. MSA Crowns Model Length mm Ø 3 5 mm Small Ø 4 6 mm Medium Ø 5 7 mm Large Winding crowns pin vice with knurled nickel-plated handle. Specially made for winding watches Crown pin vice with knurled hollow nickel-plated handle. Provided with a sliding locker for an easy and quick tightening with one hand. Pin vice for barrel staff with hollow nickel-plated hexagonal handle. Provided with a sliding locker for an easy and quick tightening with one hand. MSA Length mm TOOLS 2016
7 PIN VICES MSA Length mm Balance screws hardened steel pin vice, knurled nickel-plated handle. Provided with a sliding locker for an easy and quick tightening with one hand. TOOLS
8 PIN VICES MSA Length mm Knurled steel broach Ø 8.00 mm, for use with P 4.5 type chucks MSA , -150, -200, -300 and Precise tightening and steady. Delivered without chucks. Accessories : MSA P 4.5 type chuck. Internal traction threading. MSA Length mm Knurled steel broach Ø 6.00 mm, for manual use or mounted on a lathe. Precise tightening and steady. Delivered with 4 easily interchangeable tightening chucks Ø 0.80, 1.00, 1.20 and 1.50 mm. Spare parts : MSA Items Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø MSA Length mm Knurled steel broach Ø 4.70 mm, for use with staking tools illustrated on chapter 13. Delivered with 1 adjustment ring and 4 easily interchangeable tightening chucks Ø 0.80, 1.00, 1.20 and 1.50 mm. Spare parts : MSA Items Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø Tightening chuck Ø TOOLS 2016
9 drill i The drill is a piercing tool operated by a threated block Drill or drill holder for piercing. The tool has a series of helicoidally grooves and is turned by moving a threated block alternately up and down. Delivered with 1 steel chuck. TOOLS
10 CUTTING BROACHES i The cutting broaches are used for enlarging holes. They have a 5-sided tapered shaft (pentagonal section) with sharp cutting edges. (L) MSA No. Total (L) Useful MSA No. Total (L) Useful sided conical cutting broach, without handle, made of tool steel. The taper is 1:100. The numbers correspond to the measurements from the English screw-plate (Stubs) and in mm. Size is measured slightly below largest portion of cutting edges x Assortment of 6 5-sided cutting broaches with plastic handle. Contents : Ø 0.40, 0.60, 0.80, 1.00, 1.20 and 1.40 mm TOOLS 2016
11 CUTTING BROACHES MSA No. Total MSA No. Total sided conical cutting broach, with plastic handle, made of tool steel. The taper is 1:100 The numbers correspond to the measurements from the English screw-plate (Stubs) and in mm x Assortment of 6 5-sided cutting broaches with plastic handle. Contents : Ø 0.60, 0.80, 1.00, 1.30, 1.60 and 2.00 mm. TOOLS
12 CUTTING BROACHES x Assortment of 12 extra thin cutting broaches with plastic handle. Contents : Ø 0.05, 0.08, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50 and 0.55 mm x 15 x Assortment of 6 5-sided cutting broaches with plastic handle. Contents : Ø 0.70, 1.00, 1.50, 2.00, 2.50 and 3.00 mm x 15 x Assortment of 6 5-sided cutting broaches with plastic handle. Contents : Ø 1.20, 1.50, 1.80, 2.20, 2.50 and 3.00 mm x Assortment of 6 5-sided cutting broaches with plastic handle. Large models for watches, alarm clocks and clocks. Contents : Ø 1.50, 2.20, 3.00, 4.00, 5.50 and 7.00 mm x Assortment of 6 5-sided cutting broaches with plastic handle. Large models for alarm clocks and clocks. Contents : Ø 2.20, 2.50, 3.00, 4.00, 5.00 and 6.00 mm x Assortment of 4 5-sided cutting broaches with plastic handle. Large models for alarm clocks and clocks. Contents : Ø 7.00, 8.00, 9.25 and mm TOOLS 2016
13 SMOOTHING BROACHES i Smoothing broaches are used for polishing the holes. MSA No. Useful MSA No. Useful Smoothing broach, with plastic handle, made of tool steel. The taper is 1:100. The numbers correspond to the measurements from the English screw-plate (Stubs) and in mm. The diameter is measured just beneath the largest round section of the broach x Assortment of 6 smoothing broaches with plastic handle. Contents : Ø 0.40, 0.60, 0.80, 1.00, 1.20 and 1.40 mm x Assortment of 6 smoothing broaches with plastic handle. Contents : Ø 0.60, 0.80, 1.00, 1.30, 1.60 and 2.00 mm. TOOLS
14 SMOOTHING BROACHES See Chapter 22. Assortments of smoothing broaches in wooden box. MSA MSA TOOLS 2016
OILERS OIL CUPS PACKAGING CLEANING
i Simple oilers : the flat metallic needle of the oiler allows precise oiling of all parts of the movement. ASSORTMENT MSA Length mm Kg 17.000-04 70 0.016 Assortment of 4 simple oilers. Aluminium hexagonal
More information1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel
1. TAPS AND SCREW-PLATES ASCO machine Tap for horology and equipment high-speed steel SPIROLEX 10 / 3G NIHS For brass, traversing holes, with 2 helicoidal grooves. Helix at left, perfectly countersinking
More informationof wet barrel hydrants, hydrant valves and hydrant tools.
JONES WET BARREL FIRE HYDRANTS The most complete selection of wet barrel hydrants, hydrant valves and hydrant tools. Bronze wet barrel fire hydrants Jones is the leader. With over 100 years of experience
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationSECTION 8 Fire Protection
Bronze Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company, LLC is the innovator in the bronze wet barrel hydrant industry.
More informationCutting
wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationPanel Beating Hammers
PANEL & TRIM Panel Beating Hammers n Polished forged, induction hardened hammer heads n Quality hickory timber handles wedged to heads for safety and retention 313055 313058 313056 313059 313057 313060
More informationHSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationBushing System. Precisions- Engineering
Bushing System The KWM Bushing System comprises KWM Bushes in conjunction with special Reamers and Bushing Tools for the rational repair of worn out pivot bearings in watches and clocks of all kinds, meters,
More informationFIRE HYDRANTS. Wet Barrel Fire Hydrants
FIRE HYDRANTS Wet Barrel Fire Hydrants Jones Wet Barrel Fire Hydrants With over 100 years of experience on the west coast the heart of the wet barrel market James Jones Company is the innovator in the
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationXT winches. simple opening. new XT system. vertical knurling. CNC base. of cleaning and maintenance.
XT winches simple opening new XT system vertical knurling min friction max friction chrome plated (CH) CNC base hard black anodized aluminium (AL) 14 new self-tailing winches available in the following
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationMINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
More information04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
More informationECO Plus 2 - The new generation of the proven BPW ECO Unit
BPW-NEWS Allg 7125703e BPW NEWS BPW BERGISCHE ACHSEN ECO Plus 2 - The new generation of the proven BPW ECO Unit The BPW ECO Unit has proven itself millions of time over, and its ECO Plus version will be
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationSpecial Points. Specifications TRAIN SIDE DIAL SIDE. Scale 2V2:1
DAL SDE TRAN SDE Scale 2V2:1 Specifications 7% ligne, lever escapement Diameter of plate 17.20 mm. Total running time: 47 hours Screwless beryllium 21,600 beats per hour Adjustable stud holder balance
More informationManual. Pneumatic Drilling Unit Series BEP 22 SK. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Pneumatic Drilling Unit Series BEP 22 SK Read this manual before installation and commissioning of the product. Keep for future reference. MAN027 - Manual BEP 22 SK, EN, Rev. 01.doc Table of
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationMICRO CUP HOLDERS
MICRO CUP HOLDERS 0 80 05 - Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More information3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE. L 303 e.1
3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE L 303 e.1 CONICAL GROUND JOINTS Besides a numerous of other types of connectors, conical ground joints are mostly used for laboratory glassware. They are
More informationFruitland 250,370 and 500 Pump Rebuild Procedure
Fruitland 250,370 and 500 Pump Rebuild Procedure - Drain oil by removing drain plug and check any contaminations in oil. - Remove the four bolts and aluminum sealing washers that connect the outer cover
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationVACUUM CUP SUPPORTS. 3D drawings available at
In the following pages are listed the cups for which each support is suited. They are specially shaped to perfectly adhere to the internal profile of the cups and they are provided with a male or female
More informationTWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
More informationService Instruction Front Suspension PASHLEY-MOULTON. 1.0 General Description. 2.0 Adjustment
Service Instruction Front Suspension PASHLEY-MOULTON 1 General Description 2 Adjustment 3 Problems and their Remedies 3.1 Clunking or Banging Noises 3.2 Suspension Squeaking 3.3 Seized Suspension 4 Disassembly
More informationNorden. A Lancashire Mill Engine. Scale: 1:12
Scale: 1:12 Neil M. Wyatt February 2009 Fig. 1: General Arrangement General Arrangement Sheet: 1 An Old Steam Engine DEAR SIR, In the ruins of an old mill at, near Rochdale, there is an old steam engine
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationCreusen Professional Floor-standing/Bench Drill Presses 8000
Creusen Professional Floor-standing/Bench Drill Presses 8000 A series of floor-standing and benchtop drill presses for the professional user featuring the qualitythat you can expect from Creusen. The models
More informationBasic Parts Description Size Page Stock No.
Basic Parts Description Size Page Stock No. No. Trouble Shooting 800 Series 4, 5 BPS-1 800 Series Repair Kit 3 /4" 6 BPS-2 800 Series Repair Kit 1" 7 Touble Shooting 950 Series 8, 9 BPS-3 950 Series Repair
More informationWORKSHOP PROCEDURES FOR GEN2, GEN3 & GENJ TPMS TRANSMITTERS
WORKSHOP PROCEDURES FOR S FITTED WITH LARGE GROMMET, HYBRID SMALL GROMMET OR SMALL GROMMET SEALS LARGE GROMMET HYBRID SMALL GROMMET SMALL GROMMET SMALL GROMMET Doc N o. 90580022 ECN 1239 1/7 This document
More informationA1004LV. Polished Chrome Polished Nickel Satin Nickel Ø1 1/32 2 1/8
VINCENT 4-HOLE DECK MOUNT FILLER WITH HANDSHOWER Vincent (Transitional Bath) A1004LV FEATURES COLORS/FINISHES WARRANTY Metal levers Fixed spout 1/4-turn ceramic valves Single-funtion brass handshower 6
More informationMaintenance Information
16572679 Edition 2 May 2014 Air Drill QP Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially
More informationRevised on : 23. May TECHNICAL GUIDE PARTS CATALOGUE. Cal.NH70/71 AUTOMATIC MECHANICAL. SII Products
Revised on : 23. May. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] PARTS CATALOGUE / TECHNICAL GUIDE NH70 - NH71 Gilt version of NH70 Movement Movement size
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationPlumbing Tools. General Tools MINI TUBE CUTTER - THPC125. MINI TUBE CUTTER, 3-16mm TUBE CUTTER MIDGET TUBE CUTTERS TUBE CUTTERS TUBE CUTTER
MINI TUBE CUTTER, 3-16mm MINI TUBE CUTTER - THPC125 Designed for use in tight quarters where other cutters won't fit Accurate cutting of copper, brass and aluminium tubing Compact body and sliding block
More information#TL T EA888 GEN 3 FUELING SYSTEM/ INSTALLATION INSTRUCTIONS
#TL100069 2.0T EA888 GEN 3 FUELING SYSTEM/ INSTALLATION INSTRUCTIONS Notes: These instructions were written for a North American specification MkVII GTI. Other models, like the Golf R, are similar. When
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationTires with inner tubes were used until the 50s. Inner tube tires
Tires Back in the day Way back in the day Pneumatic Tires Dunlop patented them for bicycles in 1888 Michelin put them on cars in 1895 Goodyear was started in 1898. Named after the inventor of vulcanized
More information1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
More informationSENSITIV T-TA. Boring and facing heads with manual and automatic feed
SENSITIV T-T Boring and facing heads with manual and automatic feed 8 SENSITIV T-T General features The line of T-T boring and facing heads is provided with radial feed movement of the radial slide while
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationTECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15 AUTOMATIC MECHANICAL. SII Products
TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-01 NE15 Cal. No. Movement Movement size Time indication Basic function Frequency Accuracy
More informationPYRTE. Building The Front Axle, Fork and Steering
PYRTE Building The Front Axle, Fork and Steering The front axle on this traction engine is a very simple affair, in that it is a rectangular steel rod, sat on edge, with a pivot in the centre, which is
More informationINTERROLL DRUM MOTOR 80i
Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles Packaging
More informationUnit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
More informationFirehawk Responder Second Stage Regulator
Firehawk Responder Second Stage Regulator MAINTENANCE AND REPAIR MSA 511 (L) Rev. 4 MSA 2015 Prnt. Spec. 10000005389(I) Mat. 10096394 Doc. 10096394 Replacement Kits and Overhaul Kit P/N Description Firehawk
More informationHARRISON SILVERDALE LTD
FASTENERS FOR PLASTIC Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More informationPRODUCT CATALOGUE. Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3
BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77
More informationFLOWSERVE CORPORATION NOBLE ALLOY VALVE BALL VALVE REPAIR INSTRUCTION
FLOWSERVE CORPORATION NOBLE ALLOY VALVE BALL VALVE REPAIR INSTRUCTION Cookeville Valve Operation 1978 Foreman Drive Cookeville, TN 38541 PH: 800-251-6761 931-432-4021 FAX: 931-432-5518 CONTENTS FLOWSERVE/NOBLE
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION PRODUCT P 1 / 15 Model No. Description HR2455 Rotary Hammer 24mm (15/16") L W CONCEPT AND MAIN APPLICATIONS Model HR2455 has been developed as a sister tool to Model HR2450, the Makita
More informationTHE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*)
13 THE WOLSELEY "VIPER" AERO ENGINE. (Hispano-Suiza W.4.A*) General description. The engine referred to in this article is the Hispano-Suiza 180 hp W.4.A* Aero Engine, as made by Wolseley Motors Ltd. The
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationInterroll. Product Description. Material Versions. Technical Data. Options. Order Information. Accessories. Standard Asynchronous
D rum Motor Product Description Material Versions Applications Characteristics The drum motor is perfect for high torque applications with limited space or access. Small feed conveyors with high-duty cycles
More informationPOWER STEERING PUMP REBUILDING SPK101 Read instructions completely before removal & disassembly
POWER STEERING PUMP REBUILDING SPK101 Read instructions completely before removal & disassembly DISASSEMBLY: 1. Remove pump from car and allow to drain. 2. Remove pulley from front of pump. This requires
More informationCordless High Speed Drill
ENGLISH Cordless High Speed Drill MODEL 6503D 00039 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationH Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationACTAIR 400 to MAINTENANCE
Maintenance 8510.84/2--EN ACTAIR 400 to 1600 - MAINTENANCE INSTALLATION MAINTENANCE - General over view - Tooling - Installation - Adjustement of opening or closing adjustable end stops - Actuator dysassembly
More informationDEALER MANUAL 2008/9
DEALER MANUAL 2008/9 MAGNUM UNLEASHES Pat. Pend. X2 DOUBLE BOLT The Double Bolt Locking Mechanism provides high pull resistance. A PACK OF INNOVATIONS 2008/9 FOR Pat. Pend. STEEL BALL COMBO The Steel ball
More informationAIRTOOLS. Ratchets 256. Impact tools 257. Screwdrivers 261. Drills 262. Hammers 263. Sanders and grinders 264. Special tools 266.
254 Ratchets 256 Impact tools 257 Screwdrivers 261 Drills 262 Hammers 263 Sanders and inders 264 Special tools 266 Blow guns 268 Hose reels 269 Air line accessories 270 Hoses 273 255 USAG airtools comply
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More information2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
More informationRevised on : 07. Feb TECHNICAL GUIDE PARTS CATALOGUE. Cal.NE15C AUTOMATIC MECHANICAL. SII Products
Revised on : 07. Feb. 2018 TECHNICAL GUIDE & PARTS CATALOGUE AUTOMATIC MECHANICAL SII Products [SPECIFICATION] Item PARTS CATALOGUE / TECHNICAL GUIDE Version-02 NE15C Cal. No. Movement Movement size Time
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28
More informationIndex SENSITIV T-TA SENSITIV T-TA. GENERAL FEATURES p COMPONENTS AND ASSEMBLY p SUPPLY p ARBORS p ACCESSORIES p.
Index SENSITIV T-T Boring and facing heads with manual and automatic feed SENSITIV T-T Boring and facing heads with manual and automatic feed GENERL ETURES p. 120 COMPONENTS N SSEMBLY p. 121 SUPPLY p.
More informationFOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
More informationSpecific information for calibre 3603
Fig. 1.0 1.0 Assembling of date indication 1. Stem in position 3 : Turn anti-clockwise the driving wheel for date unlocking yoke (reference 33029) until the finger of this wheel is aligned with the pin,
More informationSA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationPneumatic Corner Drill
Maschinenfabrik GmbH Pneumatic Corner Drill Type 2 1602 0030 Illustration can differ from the original Operation and Maintenance Manual Compiled: 31.07.08 216020030_en.doc Page 1 of 12 TECHNICAL SPECIFICATION
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More information1-3/4" MOUNTING INSTRUCTIONS: 1150 SERIES SURFACE MOUNTED 1500 LB. ELECTROMAGNETIC LOCK
MOUNTING INSTRUCTIONS: 1150 SERIES SURFACE MOUNTED 1500 LB. ELECTROMAGNETIC LOCK FULL WIDTH STOP WITH SURFACE MOUNT ARMATURE Model Numbers: 1150, 1152 & 1155 READ THOROUGHLY BEFORE INSTALLING HEADER STOP
More informationU STYLE "TP" TIME RELEASE UNION SWITCH & SIGNAL DIVISION OF WESTINGHOUSE AIR BRAKE CO. INSTALLATION AND MAINTENANCE AUGUST, 1951
INSTALLATION AND MAINTENANCE j... STYLE "TP" TIME RELEASE '" INSTRUCTION PAMPHLET U--5029 AUGUST, 1951 UNION SWITCH & SIGNAL DIVISION OF WESTINGHOUSE AIR BRAKE CO. SWISSVALE, PA. 2M-B-51-2 PRINTED IN U.
More informationInterroll. Material Versions. Product Description. Technical Data. Options. Accessories. Order Information. Standard Asynchronous
Product Description Material Versions Applications Characteristics This drum motor has been developed especially for applications requiring a strong drive. Small conveyors with high-duty cycles Airport
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More information