MICRO CUP HOLDERS
|
|
- Susan Stephens
- 5 years ago
- Views:
Transcription
1 MICRO CUP HOLDERS Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability - Indicated for Pick & Place units and handling machines for unloading plastic objects from a mould press - Available in various versions with or without coupling - Suitable for all vacuum cups with male M5 support Stroke For int. ø 4 pipe CUP HOLDERS WITH STRAIGHT QUICK COUPLER FOR PLASTIC HOSE Ø 4 X 6 d E F L Weight Ø Ø g M5 10 M10 x Note: add the letter L or T to order cup holders with L-type or T-type fittings. Stroke Stroke For ext. ø 3 pipe d E F L Weight Ø Ø g SR M5 10 M10 x RR M5 10 M10 x Conversion ratio: inch = mm g Kg ; pounds = =
2 MINI CUP HOLDERS The main feature of the cup holders described in these pages is their reduced size, which results in a reduced weight and bulk. They allow using even very small cups, guaranteeing, given the same diameter, the same performance as the larger series. They are composed of: - A brass stem for fastening the cup; - A threaded sleeve equipped with nuts, for mounting the cup holder on the machine; - A spring to cushion the impact of the cup and to keep, at the same time, a constant pressure with the load to be lifted; - A quick coupling for connection with the suction hose. Support VERSION L Stroke 5.5 Support VERSION L VERSION L Force d D E F L Support included Weight Kg Ø Ø Ø art. art. g M1 x M1 x M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm; pounds = g = Kg
3 MINI CUP HOLDERS VERSION 0.. L Stroke 5.5 VERSION 0.. VERSION 0.. T Force C d D E F L Weight Kg Ø Ø Ø art. g M1 x M1 x M1 x M1 x M1 x M1 x M1 x M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately..0 Conversion ratio: inch = mm g ; pounds = = Kg
4 MINI CUP HOLDERS VERSION L Stroke 5.5 VERSION VERSION T Force C d D E F L Weight Kg Ø Ø Ø art. g M1 x M1 x M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
5 MINI CUP HOLDERS Screw VERSION L Stroke 5.5 Screw VERSION VERSION T Force D E F L Screw included Weight Kg Ø Ø art. art. g M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately..04 Conversion ratio: inch = mm g ; pounds = = Kg
6 MINI CUP HOLDERS VERSION L Stroke 5.5 VERSION VERSION T Force D E F L Weight Kg Ø Ø art. g M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
7 MINI CUP HOLDERS Screw VERSION L Stroke 5.5 Screw VERSION VERSION 0.. Force D E F L Screw included Weight Kg Ø Ø art. art. g M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. 30 T.06 Conversion ratio: inch = mm g ; pounds = = Kg
8 MINI CUP HOLDERS Screw VERSION 0.. L Stroke 5.5 Screw VERSION VERSION T Force D E F L Screw included Weight Kg Ø Ø art. art. g M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
9 MINI CUP HOLDERS for bellow CUPS VERSION 0.. L Stroke 5.5 VERSION VERSION T Force C d D E F L Weight Kg Ø Ø Ø art. g M1 x M1 x M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately..08 Conversion ratio: inch = mm g ; pounds = = Kg
10 MINI CUP HOLDERS for bellow CUPS VERSION 0.. L Stroke 5.5 VERSION VERSION T Force C d D E F L Weight Kg Ø art. g M1 x M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
11 MINI CUP HOLDERS for bellow CUPS Support VERSION L Stroke 5.5 Support VERSION VERSION T CUP HOLDERS WITH STRAIGHT QUICK COUPLER FOR PLASTIC HOSE Ø 4 X 6 Force C d D E F L Support included Weight Kg Ø Ø Ø art. art. g M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately..10 Conversion ratio: inch = mm g ; pounds = = Kg
12 MINI CUP HOLDERS for bellow CUPS Screw VERSION L Screw Stroke 5.5 VERSION VERSIO ON T Force D E F L Screw included Weight Kg Ø Ø art. art. g M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
13 MINI CUP HOLDERS for bellow CUPS Stroke 5.5 For int. ø 4 pipe Force C d D E F L Weight Kg Ø Ø Ø art. g M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately..1 Conversion ratio: inch = mm g ; pounds = = Kg
14 MINI CUP HOLDERS for bellow CUPS Stroke 5.5 Force D E F L Weight Kg Ø art. g M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
15 MINI CUP HOLDERS for bellow CUPS Stroke 5.5 Force C d D E F L Weight Kg Ø Ø Ø art. g M1 x M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately..14 Conversion ratio: inch = mm g ; pounds = = Kg
16 MINI CUP HOLDERS for bellow CUPS Stroke 5.5 Force C d D E F L Weight Kg Ø Ø Ø art. g M1 x M1 x Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
17 MINI CUP HOLDERS for CUPS with SUPPORt The cup holders described in these pages share the same features as the previously described ones, but differ for their brass stem, which has 1/8 and ¼ gas threaded female connection, for the exclusive installation of cups with male threaded support and for the vacuum connection, which can either be radial or axial. Stroke 5.5 d D E F L Weight Ø Ø Ø g G1/ M1 x G1/ M1 x Note: Stroke 5.5 d D E F L Weight Ø Ø Ø g G1/ M1 x Note: Add the letter L to the code to order L-type fittings..16 Conversion ratio: inch = mm g ; pounds = = Kg
18 MINI CUP HOLDERS with IN-bUILt SPRINg For a further bulk and weight reduction, as well as to meet the requirements of discharge machines for plastic moulding presses manufacturers, these cup holders are made with an in-built spring and an anodised aluminium cup fixing stem. Also these cup holders allow the installation of cups with male threaded support only. The particular shape of the brass drive bush for fastening the cup holder to the machine prevents any rotation of the stem and, therefore, of the cup. The vacuum connection is radial. B C d D F L Weight stroke Ø Ø Ø g G1/8 15 M10 x G1/8 15 M15 x Note: Add the letters FC to the code to order chromed iron cup holders. Note: Add the letter L to the code to order cup holders with L-type fittings. Conversion ratio: inch = mm ; pounds = g = Kg
19 MINI CUP HOLDERS with built-in bush The reduced size and the particular shape of these cup holders allow them to be directly assembled to the vacuum manifold, saving time and eliminating pipes and fittings. The hexagonal bush, for the cup holder assembly with the vacuum manifold, is equipped with a seal. It s function is to guide and seal the brass cup fixing stem. Stroke 16.4 Force D E F L Weight Kg Ø Ø art. g G3/ G3/ Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately. Conversion ratio: inch = mm ; pounds = g = Kg
20 MINI CUP HOLDERS with built-in bush Stroke 16.4 Force D E F L Weight Kg Ø Ø art. g G3/ G3/ G3/ Note: s are not an integral part of the cup holders, therefore, they must be ordered seperately.. Conversion ratio: inch = mm g ; pounds = = Kg
VACUUM CUP SUPPORTS. 3D drawings available at
In the following pages are listed the cups for which each support is suited. They are specially shaped to perfectly adhere to the internal profile of the cups and they are provided with a male or female
More information1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
More informationSUCTION FILTRES. 3D drawings available at
SUCTION FILTRES FCL IN-LINE SUCTION FILTRES, WITH PAPER CARTRIDGE PAG..01.02 PAPER FILTERING CARTRIDGES FOR FCL FILTRES PAG..02 FB SUCTION FILTRE WITH METAL CARTRIDGE PAG..03.10 STAINLESS STEEL MESH FILTERING
More informationfunnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
More informationMINI BLAST INTERNAL PIPE CLEANER
MINI BLAST INTERNAL PIPE CLEANER MINI BLAST FOR PIPES ½ TO 1¼ (13-32 mm) I.D. 30001 MB - 1 MINI BLAST 250 mm 30002 MB - 2 MINI BLAST 500 mm 30003 MB - 3 MINI BLAST 750 mm 30004 MB - 4 MINI BLAST 1000 mm
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationSpare parts list ( ) Spare parts list B60 W Bp UL
Spare parts list (5.971-886.0) Spare parts list B60 W Bp UL 14.12.2012 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list B60 W Bp UL (5.971-886.0)... 6 10 Tank (0.166-284.0)...
More information3D drawings available at Kg GAS-NPT thread adapters available at page 1.117
These small dry vacuum pumps have a suction capacity of 2 and 4 cum/h. The particular shape of the working chamber and the special graphite, with which the locking flanges and vanes are made, allow these
More informationUsing a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39.
Servicing the Tool Rotary Valve Dismantling Using a mm pin punch (079000058) drive Trigger Pin 0 out and remove Trigger Assembly 39. Disconnect Hose Assembly 35 and remove Nut 3. Seperate Head Assembly
More informationConnectors Content. Connectors at a glance Screw connectors and plug-in connectors - Standard
Connectors Content Connectors at a glance... 264 Screw connectors and plug-in connectors - Standard... 266 Screw connectors and plug-in connectors - self-extinguishing... 276 Screw connectors and plug-in
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationEXPLODED VIEW SERVICE MANUAL PRESSURE WASHER PSI Models Rev. 08/12. (Reversed View) (Reversed View) WARNING
SERVICE MANUAL PRESSURE WASHER 26 2 EXPLODED VIEW 14 (Reversed View) 3 18 22 1 17 27 This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive
More informationList of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationTUFF VAC 5000 PTO & GAS
TUFF VAC 5000 PTO & GAS 1 16-50-0000 BODY MOD:PTO "STICKER INCLUDED" 1 N/I 16-50-1000 BODY (MOD.GAS) 1 2 16-50-0005 DEFLECTOR LARGE 1 3 16-50-0010 DEFLECTOR SMALL 1 4 16-03-4800 EXHAUST SCREEN 1 5 16-55-0060
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationBA100K Diesel Driven Dewatering and Sewage Pump Max. 836 US GPM, Max. 73 ft. / 31 PSI
Pump specifications: Type... BA100K D193 Max. flow... 836 US GPM (190 m 3 /hour) Max. pressure... 73 ft. / 31 PSI (22 mwc) Solids handling... 3,23 (82 mm) Impeller type... Channel impeller Priming system...
More informationBA150E Diesel Driven Dewatering and Sewage Pump Max US GPM, Max. 115 ft. / 50 PSI
Pump specifications: Type... BA150E D285 Max. flow... 2091 US GPM (475 m 3 /hour) Max. pressure... 115 ft. / 50 PSI (35 mwc) Connections... 6 (DN 150) Solids handling... 3,15 (80 mm) Impeller type... Open
More informationList of parts for SAB 163 Mk 4
03.0 List of parts for SAB 63 Mk 4 Relevant drawings 0662-740 Pos. Compressor complete, male, Man. V i 46-62 Compressor complete, female, Man. V i 46-63 Compressor complete, male, Auto. V i 46-64 Compressor
More information4050A. Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
4050A Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies Parts Identification READ these instructions before placing unit in service KEEP these and other materials
More informationBA150E Diesel Driven Self Priming Ballast Pump Max. 460 m 3 /hour, Max. 27 mwc
Pump specifications: Type... BA150E D285 Max. flow... 460 m 3 /hour (2025 US GPM) Max. pressure... 27 mwc (89 ft.) Connections... DN150 (6ʺ) Solids handling... 80 mm (3,14ʺ) Impeller... Stainless steel
More informationCode Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
More informationBA150E Diesel Driven Dewatering and Sewage Pump Max. 475 m3/hour, Max. 35 mwc
Pump specifications: Type... BA150E D285 Max. flow... 475 m3/hour (2091 US GPM) Max. pressure... 35 mwc (115 ft.) Connections... DN150 (6 ) Solids handling... 80 mm (3,15 ) Impeller type... Semi-open impeller
More information20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.
2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This
More informationAIR SANDERS & POLISHERS
AIR SANDERS & POLISHERS The most complete line of air finishing tools. Ingersoll Rand finishing tools are designed for long-life and swirl-free finishes. 49 4151-HL High Performance 150 mm Random Orbital
More informationBARESHAFT PUMP. UNx FEATURES AND BENEFITS. Pump & Fluid Ends 40,000 PSI
UNx BARESHAFT PUMP FEATURES AND BENEFITS The Jetstream 40,000 psi UNx Bareshaft Pump provides unrivaled durability and strength. The pump is capable of power inputs up to 325 horsepower and, coupled with
More informationHYDRAULIC PIPE BENDER - HAND OPERATED - TRIPOD MODEL PIPE BENDER - MECHANICAL MOTORISED PIPE BENDER - SPECIAL PURPOSE- MULTI FUNCTION
HYDRAULIC PIPE BENDER - HAND OPERATED - TRIPOD MODEL VXHPB - T 9 VXHPB - T 9 VXHPB - T 21 9 Ton. 21 Ton. MAXIMUM 2 mm. 370 mm. CRIMP RANGE (mm.) Ø 21.3 - Ø 60 mm. Ø 21.3 - Ø 8 mm. BENDING FORMERS (inch)
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationBimetal thermometer with Pt100 electrical output signal Model 54, stainless steel version
Mechatronic temperature measurement Bimetal thermometer with Pt100 electrical output signal Model 54, stainless steel version WIKA data sheet TV 15.01 Applications Twin-Temp Machine building, plant and
More informationLIQUID SYSTEM PARTS LIST
STRIKER 550 850 00 LIQUID SYSTEM PARTS LIST LIQUID SYSTEM COMPONENTS... - SPRAYBAR ATTACHMENT... BAR ASSEMBLY... SIDE SPRAY ASSEMBLY...5 -WAY SPRAY ASSEMBLY...5 LIQUID BLADDER TANK... LEVEL INDICATOR ASSEMBLY...7
More informationSpare parts manual SAB 83
Spare parts manual SAB 83 Screw compressor unit ENG Spare parts Manual SAB 83 18. Parts list for SAB 83 18. Parts list for SAB 83 0662_811_ENG.fm Relevant drawing document: 0662-810 Pos. no. Designation
More informationMicro-venturis, series GVA
Micro-venturis, series GVA Reference V : vacuum outlet Coupling M F, 6 mm deep or Quick-connect coupling, tube 4 mm dia. or Male coupling, 4 mm dia.,. mm long ø. 4... Version GVA -- 44 GVASIL or GVASPO
More informationBimetal Thermometers Process Industry Series, Model 55
Mechanical Temperature Measurement Bimetal Thermometers Process Industry Series, Model 55 WIKA Data Sheet TM 55.01 Applications Chemical industry, petrochemical industry, process technology and food industry
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water
Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered
More informationIndustrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationBA180E Diesel Driven Dewatering and Sewage Pump Max US GPM, Max. 135 ft. / 59 PSI
Pump specifications: Type... BA180E D315 Max. flow... 3150 US GPM (720 m 3 /hour) Max. pressure... 135 ft. / 59 PSI (41 mwc) Connections... 8" (DN200) Solids handling... 3.15" (80 mm) Impeller type...
More informationGas-actuated thermometer Model 73, stainless steel version
www.materm.si tel: 02 608 90 10 Mechanical temperature measurement Gas-actuated thermometer Model 73, stainless steel version WIKA data sheet TM 73.01 Applications For aggressive media in the chemical,
More informationAir Controls. Air Regulators /0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge.
Air Controls Air Regulators 78-210/0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge. Quick Detach Hi-Flo Air Couplings & Tails 50-401 Quick detach doubleacting coupling1/4
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationBA180E Diesel Driven Dewatering and Sewage Pump Max. 720 m 3 /hour, Max. 41 mwc
Pump specifications: Type... BA180E D315 Max. flow... 720 m 3 /hour (3168 US GPM) Max. pressure... 41 mwc (135 ft.) Connections... DN200 (8") Solids handling... 80 mm (3,15") Impeller type... Semi-open
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationhttps://amironic.co.il/ COUPLINGS Oldham Lateral Offset Coupling Set Screw Fixing : Blind Hub : Nm : 2-20mm Bores
BG COUPINGS Oldham ateral Coupling Set Screw Fixing : Blind : 0.7-57 : - 0 Bores ØA BG BG9 BG3 BG9 BG5 BG33 BG33S BG BG BG9 BG3 BG9 BG5 BG33 BG33S BG 0 0 0 0.00 Deg/ 5.700.900 0.0 0.0 0.0 /rad 0 30 5 5
More informationSpare parts list ( ) Spare parts list BR/BD 40/25 C
Spare parts list (5.970-442.0) Spare parts list BR/BD 40/25 C 07.12.2012 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list BR/BD 40/25 C (5.970-442.0)... 6 10 Tank (0.164-308.0)...
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationBALL VALVES FILTERS TEST POINTS 8
BALL VALVES FILTERS TEST POINTS 8 8 PRODUCT CATALOGUE 357 HYDROSCAND BALL VALVES, FILTERS TEST POINTS TABLE OF CONTENTS BALL VALVES PAGE BALL VALVES The ball valves are mainly used as shut-down valves
More informationSUMMARY STAINLESS STEEL FITTINGS FITTINGS P PUSH-IN FITTINGS, STAINLESS STEEL D3.2 P STANDARD FITTINGS SERIES XA D3.8 P QUICK FITTINGS SERIES XC D3.
SUMMARY STAINLESS STEEL D3 P PUSH-IN, STAINLESS STEEL D3.2 P STANDARD SERIES XA D3.8 P QUICK SERIES XC D3.11 SUMMARY STAINLESS STEEL D3.1 PUSH-IN, STAINLESS STEEL The push-in fittings in the XR can be
More informationNumatic International Spare Parts Model No: Numatic International Spare Parts Model No: NB: FOR WIRING SEE DRAWING: DRW-7279
TTB 0 BASE ASSEMBLY EXPLODED DRAWING NB: FOR WIRING SEE DRAWING: DRW- 0 0 0 0 0 0 0 0 0 0 0 DRAWING: DRW-0 ISS:A0 /0/0 0 TTB 0 BASE ASSEMBLY EXPLODED DRAWING TTB 0 CHASSIS WELDED ASSEMBLY 0 TTB 0 HANDLE
More informationOMAX Equipment Nozzles & Orifices for Omax Equipment
Nozzles & Orifices for Omax Equipment 12780-030-40 Long Life Nozzle.315 x.030 x 4.000 #300766-030 #301677-030 12780-042-40 Long Life Nozzle.315 x.042 x 4.000 #300766-042 #301667-042 11474-014 Ruby Orifice
More informationAccessories. Effective December 2012 Replaces November PL 1401-Q B600 - Mistral - Typhon II - B1500 Accessories 1/10
MOUVEX PARTS LIST PL : 1401-Q01 MODEL : B600 - Mistral - Typhon II - B1500 Section 1401 Accessories Effective December 2012 Replaces November 2012 PL 1401-Q01 12.12 B600 - Mistral - Typhon II - B1500 Accessories
More informationDynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION
Dynaswivel Air Connectors Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM Aluminum and Stainless Steel Construction Single Pivot Right angle single-pivot swivels 360 at one location.
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationHANG- EN SLUITWERK. Speciale producten 2. Reken op ons.
HANG- EN SLUITWERK Speciale producten 2 Auerhaan Lelystad is een bedrijf met een zeer lange historie; opgericht in 1885, is het bedrijf een bekende en betrouwbare toeleverancier van producten voor de carrosseriebouw,
More informationart. 499 art. 502 art. 503 Quick closing cap with toungues for loading mouths Features Complete of fuel resistent gasket
art. 499 Quick closing cap with toungues for loading mouths 04990201Aluminium made DN 3" art. 502 Complete of fuel resistent gasket Quick closing cap with handle for loading mouths 05020101 Brass DN 2"
More informationStandard strokes (for all diameters) Stroke tolerance (ISO 15552)
Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationO:\Machine Manuals & Spare Parts Lists\Commercial Cold Water Electrical\HD1050 PL Page 1
PIECE PARTS - parts listing 1 50662130 Cover 1 2 51320100 Plug 1 3 53210970 Handhold 1 4 53631350 Joint ring 1 5 63130030 SPRING 1 6 50520170 SUPPORT RIGHT 1 7 Stockpiling Discontinued 1 8 73030780 Sheet
More informationSAB 128R and SAB 163R Mk4 Screw compressor units. Spare parts manual
SAB 128R and SAB 163R Mk4 Screw compressor units Spare parts manual en Spare Parts Manual SSaAB SAB128RandSAB163R Mk4 Spare Parts manual SAB 128R and SAB 163R Mk4 The screw compressor and unit can be
More informationCylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationHASTINGS BRASS FOUNDRY LTD.
HASTINGS BRASS FOUNDRY LTD. PROUD MANUFACTURER OF FIRE FIGHTING EQUIPMENT WORKING TOGETHER SINCE 1916 HASBRA FIRE FIGHTING EQUIPMENT CONTENTS HB10S Wrench Set (Bracket & 2 Wrenches)...Page 1 HB10 Wrench
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More informationSpare parts list ( ) Spare parts list KM 100/100 Bat
Spare parts list (5.963-738.0) Spare parts list KM 100/100 Bat 15.04.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list KM 100/100 Bat (5.963-738.0)... 6 10 Frame (0.209-732.0)...
More informationCENTRIFUGAL IMMERSION PUMPS
CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationDELUXE TELESCOPING LANCE ASSEMBLY
DELUXE TELESCOPING LANCE ASSEMBLY Products Part # Lenght Inlet Outlet 27.0080 18 3/8 Plug 1/4" QC F 27.0082 24 3/8 Plug 1/4" QC F The product come supplied with: - Non Molded Extension Wand M22 Male Inlet
More informationPRESSURE CONTROL 800 SERIES CONTROL VALVES
PRESSURE CONTROL SERIES CONTROL S 2 BRASS PRESSURE CONTROL PILOT PART NUMBER SUMMARY MODEL # PILOT BODY SIZE CONTROL PRESSURE KIT 1/4" KIT 3/8" SEE PAGE D2 LARGE 4, 6, 8" Reducing 5-50psi 9529-001 9529-011
More informationUsed Oil Drain Used Antifreeze Drain
Roughneck II Series Self Evacuating Drains Drain used oil or antifreeze into the 23 gallon reservoir, then connect to low pressure air hose to evacuate oil or antifreeze into any bulk storage tank. No
More informationPHONE /
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over
More informationSERVICE MANUAL HD 2.5/27 PB AL HD 3.7/35 PB AL PGA PGA BXA BXA BGA BGA
SERVICE MANUAL MODEL # ORDER # HD 2.5/27 PB AL HD 3.7/35 PB AL PGA3-27324 PGA4-35324 BXA-252739 BXA-373539 BGA-252737 BGA-373537 1.107-132.0 1.107-133.0 1.107-127.0 1.107-128.0 1.107-120.0 1.107-121.0
More informationHIGH PRESSURE SPRAY GUNS &ACCESSORIES
HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000
More informationKesho Ram Soni & Sons.
Kesho Ram Soni & Sons www.krssdrills.in 5 The Ultimate Lever Grease Gun 6 Lever Grease Gun Heavy Duty Heavy duty aluminium head Rubber grip for convenience in use Heavy duty aluminium head Drop resistant
More informationMetal Bellows Design Guide
The following definitions are provided to assist in part selection and customization to meet engineering design requirements and objectives. The definitions in this design guide are related to columns
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
/7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action
More informationMedium Pressure Diaphragm Pumps
Medium Pressure Diaphragm Pumps Installation, Operation, Repair, and Parts Manual Form L-1382 4/06 Description Hypro medium pressure diaphragm pumps are recommended for spraying herbicides, pesticides,
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More informationBimetal Thermometers Model 54, Heavy Duty Series
Mechanical Temperature Measurement Bimetal Thermometers Model 54, Heavy Duty Series WIKA Data Sheet TM 54.01 Applications T Universally suitable for plant, machinery, tank and apparatus construction T
More informationVacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
More informationVacuum Components SHREE VYANKATESHWARA E N T E R P R I S E S
CKD Actuators Pneumatic Valves Pneumatic Auxiliary Components Pneumatic Auxiliary Components (Main Line Unit) Pneumatic Filter, Regulator, Lubricator (F.R.L. Unit) Related Pneumatic Products DD Actuator
More informationParallel Gripper Series CGB
Parallel Gripper Series CGB Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The guided parallel gripper mod. CGB is available in 4 different sizes and is equipped with a guide mechanism that offers
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationPUMP PARTS HYPRO PUMPS DIAPHRAGM MODELS: D50 & D50AP-A REPLACEMENT PARTS
PUMP PARTS HYPRO PUMPS MODELS: D50 & D50AP-A REPLACEMENT PARTS Code 4 A Stock No. Mfg. No. Parts Inc. Description Price Ea. HYK-25 9910-KIT1919 s O-Ring Kit $ 31.28 HYK-26 9910-KIT2111 l Diaph. Kit (Buna-N)
More informationSeries Cylinders according to standard ISO 15552
Series 131-11 General This series of pneumatic cylinders is manufactured according to ISO 31 standards adapted to MA 2 and CNOMO/AFNOR 3 that guarantee the interchangeability of the cylinders even without
More informationTECHNICAL CATALOGUE BALL VALVES: PARIS
TECHNICAL CATALOGUE BALL VALVES: PARIS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationCM2X-Z 10 - C D M 2 X L Z - M9BW. Port thread type. Nil TN TF. Rc NPT. Rubber bumper only. Cylinder stroke (mm) Action
Series 10-11- CM2X-Z ø, ø, ø, ø Low Speed Cylinder ouble Acting, Single Rod How to Order Clean series 10 11 Vacuum suction type irectional Control Valves Vacuum suction type Low speed cylinder B L F G
More informationBA100K Diesel Driven Dewatering and Sewage Pump Max. 190 m 3 /hour, Max. 22 mwc
Pump specifications: Type... BA100K D193 Max. flow... 190 m 3 /hour (836 US GPM) Max. pressure... 22 mwc (73 ft.) Solids handling... 82 mm (3,23ʺ) Impeller type... Channel impeller Priming system... BBA
More informationBA100K Diesel Driven Dewatering and Sewage Pump Max. 190 m 3 /hour, Max. 22 mwc
Pump specifications: Type... BA100K D193 Max. flow... 190 m3/hour (836 US GPM) Max. pressure... 22 mwc (73 ft.) Solids handling... 82 mm (3,23 ) Impeller type... Channel impeller Priming system... BBA
More informationSpare parts list Pentruder 6-16
Spare parts list Pentruder 6-16 Page A-G Pentruder 6-16 Page A Spare parts list Pentruder 6-16 Page A 6-16-A01 56020100 Chassis 6-16 6-16-A02 34190100 Gear shaft primary 6-16 6-16-A03 35130100 Gear wheel
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationAIRTOOLS. Ratchets 256. Impact tools 257. Screwdrivers 261. Drills 262. Hammers 263. Sanders and grinders 264. Special tools 266.
254 Ratchets 256 Impact tools 257 Screwdrivers 261 Drills 262 Hammers 263 Sanders and inders 264 Special tools 266 Blow guns 268 Hose reels 269 Air line accessories 270 Hoses 273 255 USAG airtools comply
More informationPRODUCT GUIDE Version 2004:02 For a better workbench environment
PRODUCT GUIDE Version 2004:02 For a better workbench environment FILTRONIC AB Box 2284, SE-531 02 LIDKÖPING SWEDEN Tel +46 (0)510-208 10, Fax +46 (0)510-201 40 e-mail: office@filtronic.se www.filtronic.se
More informationGas Actuated Thermometers Stainless Steel Series, Model 73
Mechanical Temperature Measurement Gas Actuated Thermometers Stainless Steel Series, Model 73 WIKA Data Sheet TM 73.01 Applications For aggressive media in the chemical, petrochemical and process engineering
More informationOPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More information