VACUUM CUP SUPPORTS. 3D drawings available at
|
|
- Posy Norton
- 5 years ago
- Views:
Transcription
1 In the following pages are listed the cups for which each support is suited. They are specially shaped to perfectly adhere to the internal profile of the cups and they are provided with a male or female axial pin in order to allow suction, as well as to fasten them to the machine. These cups can be manually assembled onto them with a simple pressure, with no adhesives. They are made with nickel-plated brass or anodised aluminium or with special materials upon request brass brass Hex brass Hex brass Hex. 2 Convertion ratio: inch = mm ; pounds = g = Kg GAS-NPT thread adapters available at page.7.95
2 Hex brass Hex brass D E F H Support Cup Weight brass D E F H Support Cup Weight brass Hex aluminium Conversion ratio: inch = mm g ; pounds = = Kg
3 Hex brass brass Hex. 2 Hex aluminium aluminium Hex. 7 Conversion ratio: inch = mm ; pounds = g = Kg.97
4 Hex brass Hex aluminium Hex aluminium aluminium Conversion ratio: inch = mm g ; pounds = = Kg
5 Hex aluminium Hex aluminium aluminium A B D F H Support Cup Weight M aluminium Conversion ratio: inch = mm ; pounds = g = Kg.99
6 N O P Q Support Cup Weight material art. g aluminium A D E H Support Cup Weight Ø aluminium A D E H Support Cup Weight Ø aluminium Convertion ratio: inch = mm g ; pounds = = Kg
7 N O P Q Support Cup Weight material art. g aluminium A D E H Support Cup Weight Ø aluminium D F G H Support Cup Weight aluminium Convertion ratio: inch = mm ; pounds = g = Kg GAS-NPT thread adapters available at page.7.0
8 A B D F H Support Cup Weight Ø Ø G/ aluminium Hex aluminium A C D F H M Support Cup Weight Ø Ø G3/ aluminium N O P Q Support Cup Weight material art. g aluminium Conversion ratio: inch = mm g ; pounds = = Kg
9 D E F H Support Cup Weight brass D E F H Support Cup Weight brass Hex brass brass Ø M brass Hex. 4 Hex. 4 Conversion ratio: inch = mm ; pounds = g = Kg.03
10 Hex. 4 Ø M brass Hex brass A B C D E F G H N Support Cup Weight Ø Ø Ø Ø M aluminium G3/ aluminium G3/ aluminium B E F Support Cup Weight G/ aluminium Fixing plate art TSP perforated screw M3x5 art Note: By ordering art you will also receive the fixing plate and the TSP perforated screw.04 Conversion ratio: inch = mm g ; pounds = = Kg
11 A B C E F Support Cup Weight G/ aluminium G/ aluminium G/ aluminium Fixing plate art for supp art for supp art for supp TSP screws M3x5 art Note: By ordering the article associated with the support, the fixing plate and the TSP screws will also be provided aluminium Hex brass F G H Support Cup Weight material art. g aluminium Conversion ratio: inch = mm ; pounds = g = Kg.05
12 Hex brass A B C D F H M Support Cup Weight Ø Ø Ø M2 G3/ aluminium RING NUT A B C D H Ring nut Support Weight Ø Ø Ø G/ aluminium G3/ aluminium G3/ aluminium Note: By ordering the support, you will automatically receive its associated ring nut. SUPPORT A Ø G/ aluminium G3/ aluminium G3/ aluminium Conversion ratio: inch = mm g ; pounds = = Kg
13 A B C D E H M Support Cup Weight Ø Ø Ø Ø material art. Kg M2 G3/ aluminium A B D E H M N Support Cup Weight Ø material art. Kg G3/ aluminium A B D E H M N Support Cup Weight Ø material art. Kg G/ aluminium Conversion ratio: inch = mm ; pounds = g = Kg.07
14 B D H Support Cup Weight Ø G/ aluminium A B D E H Support Cup Weight Ø Ø G3/ aluminium A B D E H Support Cup Weight Ø Ø G3/ aluminium A B D E H Support Cup Weight Ø Ø M aluminium Conversion ratio: inch = mm g ; pounds = = Kg
15 Hex aluminium aluminium aluminium aluminium Conversion ratio: inch = mm ; pounds = g = Kg.09
16 E F G H Support Cup Weight material art. g aluminium E F G H Support Cup Weight material art. g aluminium E F G H Support Cup Weight material art. g aluminium E F G H Support Cup Weight material art. g aluminium Conversion ratio: inch = mm g ; pounds = = Kg
17 A B D E H Support Cup Weight Ø Ø G/ aluminium N O P Q Support Cup Weight material art. g aluminium A B C D E H M Support Cup Weight Ø Ø Ø G3/8 G3/ aluminium brass Hex. 2 Conversion ratio: inch = mm ; pounds = g = Kg.
18 B D H Support Cup Weight Ø Ø supporto art. g M aluminium aluminium Hex brass A C D E N H Support Cup Weight Ø Ø G/ aluminium Conversion ratio: inch = mm g ; pounds = = Kg
19 A B C D E N H Support Cup Weight Ø Ø Ø G/2 G/ aluminium Hex. 7 C E F G H Support Cup Weight M aluminium housings for TCEE M4 screws Non-slip plastic coating filtre N O P Q Support Cup Weight material art. g aluminium O-ring A B D E F H Support Cup Weight Ø Ø G/ aluminium Conversion ratio: inch = mm ; pounds = g = Kg.3
20 A B D E F H Support Cup Weight Ø Ø G/ aluminium Hex brass Hex brass Hex brass Hex. 2 Hex brass brass Conversion ratio: inch = mm g ; pounds = = Kg
21 D F H Support Cup Weight Ø material g brass D F H Support Cup Weight Ø material g brass D F H Support Cup Weight Ø material g brass D E F H Support Cup Weight Ø material g brass Hex. 8 Ø material g brass D F H Support Cup Weight Ø material g brass D F H Support Cup Weight Ø material g brass Conversion ratio: inch = mm ; pounds = g = Kg.5
22 D F H Support Cup Weight aluminium D E F H Support Cup Weight brass D F H Support Cup Weight aluminium Non-slip plastic coating 2 housings for TCCE M4 screws filtre O-ring A B C H N O P Q Support Cup Weight material art. g aluminium housings for TCCECE M4 screws filtre Non-slip plastic coating A B C H N O P Q Support Cup Weight material art. g aluminium O-ring.6 Conversion ratio: inch = mm g ; pounds = = Kg
23 SUPPORTS A B C D E H Support Cup Weight Ø Ø Ø G/ aluminium G/ aluminium aluminium aluminium GAS - NPT ADAPTERS These adapters allow using NPT threaded fittings on vacuum components with gas threads, such as cups, valves and solenoid valves, filtres etc. FEMALE GAS - MALE NPT ADAPTER A D E F H T Adapter Weight Ø Ø material g /8 NPT G/ brass /4 NPT G/ brass /8 NPT G3/ brass /2 NPT G/ brass /4 NPT G3/ brass NPT G brass /4 NPT G / brass /2 NPT G / brass NPT G brass 277 Hex. T MALE GAS - FEMALE NPT ADAPTER A D E F H T Adapter Weight Ø Ø material g G/8 /8 NPT brass G/4 /4 NPT brass G3/8 3/8 NPT brass G/2 /2 NPT brass G3/4 3/4 NPT brass G NPT brass G /4 /4 NPT brass G /2 /2 NPT brass G2 2 NPT brass 277 Hex. T.7
24 THREADED GRUB SCREW WITH CALIBRATED HOLE These threaded grub screws with calibrated hole are used to reduce the cup suction section, thus reducing vacuum losses in case the cup fails to grip. They are made with brass and can be inserted in all the cup supports set for this application. REDUCTION A D F H Grub screw Weight Ø Ø material g M brass M8.2 5 brass M8.5 5 brass 2.3 A D F H Grub screw Weight Ø Ø material g G/8.2 5 brass G/8.5 5 brass G/4.2 5 brass 4.0 These standard accessories provide various cup assembly options. These brass or galvanised steel reductions screwed onto the cup standard support connectors can vary the thread from gas to metric or vice-versa, from male to female or vice-versa, and they can also increase or reduce the size of their threaded diameter. Hex. 20 MF REDUCTION D d H Support Weight Ø Ø material g G/4 M0 4 steel G3/8 M0 4 steel G3/8 G/4 4 steel /4 NPT M0 4 steel /8 NPT M0 4 steel /8 NPT G/4 4 steel 5.9 Hex. 20 MM REDUCTION D E F G H Reduction Weight Ø material g M brass 4.0 FF REDUCTION FOR GS ARTICULATED JOINT D E F G H Reduction Weight Ø Ø material g M M5 36 brass M G/8 48 brass M G/8 48 brass 90.8 Conversion ratio: inch = mm g ; pounds = = Kg
25 MAXIGRIP CUP REDUCTIONS MF REDUCTIONS FOR VRP CUPS D d F H SW Weight Ø Ø g G3/8 G/ MF REDUCTIONS FOR VRS - VEP - VES CUPS D d F H SW Weight Ø Ø g G3/8 G/ MM REDUCTIONS FOR VRP CUPS D d E F SW Weight Ø Ø g G/4 G/ G/4 M0 x G/4 M4 x G3/8 G/ G3/8 M0 x G3/8 M4 x MM REDUCTIONS FOR VRS - VEP - VES CUPS D d E F SW Weight Ø Ø g G/4 G/ G/4 M0 x G/4 M4 x G3/8 G/ G3/8 M0 x G3/8 M4 x Conversion ratio: inch = mm ; pounds = g = Kg.9
26 SELF-LOCKING CUPS WITH TRACTION RELEASE These cups do not require a connection to any vacuum source, since the object onto which they are laid on evacuates the air inside them. A built-in non-return valve prevents the air from entering again, thus maintaining the vacuum. To release the piece, it is sufficient to lift it a few millimetres, so to open the non-return valve, which restores the atmospheric pressure inside the cup, by letting the air in. Since possible losses cannot be recovered, these cups a recommended only for holding objects with smooth and impermeable surfaces, such as glass, polished sheets, and other similar objects. They are particularly suited for glass carrying trolleys feeding trolleys for robotic systems. They are made with nickel-plated brass with a steel drive bush, which can be provided in the anti-rotation version upon request. SPARE CUPS WITH VULCANISED SUPPORT Force A B D E G H Support Weight Kg Ø Ø Ø material g * G3/ steel *.04 3 G3/ steel * G3/ steel * G3/ steel 74.8 * Complete the code by indicating the compound: B= BENZ rubber; N= natural para rubber; S= silicon Cup Ring nuts SELF-LOCKING CUPS WITH TRACTION RELEASE Force D E H Cup Weight Kg Ø g * * * * * Complete the code by indicating the compound: B= BENZ rubber; N= natural para rubber; S= silicon.20 Conversion ratio: inch = mm g ; pounds = = Kg
27 SELF-LOCKING CUPS WITH TRACTION RELEASE SPARE CUPS WITH SUPPORT Force A B D E G H Cup Support Support Weight Kg Ø Ø Ø material g * G/ aluminium * G/ aluminium 49.3 * Complete the code by indicating the compound: A= oil-resistant rubber; N= natural para rubber; S= silicon Cup Ring nuts SELF-LOCKING CUPS WITH TRACTION RELEASE Force D E H Cup Weight Kg Ø g * * * Complete the code by indicating the compound: A= oil-resistant rubber; N= natural para rubber; S= silicon Conversion ratio: inch = mm ; pounds = g = Kg.2
MICRO CUP HOLDERS
MICRO CUP HOLDERS 0 80 05 - Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
More informationSUCTION FILTRES. 3D drawings available at
SUCTION FILTRES FCL IN-LINE SUCTION FILTRES, WITH PAPER CARTRIDGE PAG..01.02 PAPER FILTERING CARTRIDGES FOR FCL FILTRES PAG..02 FB SUCTION FILTRE WITH METAL CARTRIDGE PAG..03.10 STAINLESS STEEL MESH FILTERING
More information1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
More information3D drawings available at Kg GAS-NPT thread adapters available at page 1.117
These small dry vacuum pumps have a suction capacity of 2 and 4 cum/h. The particular shape of the working chamber and the special graphite, with which the locking flanges and vanes are made, allow these
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationMulti-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications
Multi-Stage Ejectors Suction rate from 332 l/min to 2,370 l/min Suitability for Industry-Specific Applications Applications Multi-stage ejector for handling of cardboard, packing materials, insulating
More informationVacuum pad for packaging bag
Vacuum pad for bag-like article conveyance Characteristics http://en.pisco.co.jp/ New Product Realizes followability to work-piece and posture stabilization during conveyance. Soft material is used for
More informationA Complete Range of Adaptors
A Complete Range of Adaptors Adaptors 0143 Page 9-7 0144 BSPT/ Page 9-7 0152 BSPT Page 9-7 0145 Page 9-7 0158 BSPT/ Page 9-7 0117 Page 9-8 0155 Page 9-8 0164 NPT/ Page 9-8 0167 BSPT/NPT Page 9-8 0168 Page
More information:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:
trolley for drums 30-60 kg kit for drums 30-60 kg 35260 35250 37500 35249 35259 37499 35264 35254 37504 3:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:1 20 14 18 20 14 18 20 14 18 35076 35173 36073 35076 35173 36073
More informationPipe fittings and tubing T, MPL, PNZ
Catalogue 2001 Pipe fittings and tubing T, MPL, PNZ Tube od ø4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 14/12, 15/12,5 Connections M5, G1/8, G1/4, G3/8, G1/2 R1/8, R1/4, R3/8, R1/2, R3/4 7 When involved in factory
More informationLeft: Custom EOAT spring levelers, vacuum fitting and cup assembly. Right: Vacuum fitting and Vacuum cup. Ø D E B VCF1-1032M
Vacuum up Fittings Ideal pplications: utomation assembly fixtures Robotic end effectors nd-of-rm Tooling devices Left: ustom OT spring levelers, vacuum fitting cup assembly. Right: Vacuum fitting Vacuum
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationSuction Pads for Plastic Films and Paper
for Plastic Films and Paper Flat SGN 25 K to SGN 40 K Suction area (Ø) from 25 mm to 40 mm Suitability for Industry-Specific Applications Applications Round, flat suction pad for handling of paper, plastic
More informationVacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More information1/2" /4" " /4" 1 1 /4"
Standard Sheet for Circuit Control Valve 4117 R Edition 1000 (0999) 4117 R Article R R1 L H Number Connection Open 4117 R Order Number 1/2" 65 97 1 4117 61 3/4" 70 109 1 4117 62 1" 85 112 1 4117 63 1/4"
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationVisual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
More informationCarpet & Hard Floor Cleaner Table Model 340 Standard
Table 100 072016 Model 340 Standard Table 100 072016 1/16 Table 100 072016 Model 340 101 18.10.15.000 MAIN SIDE ELEMENT W/B BUSH 340-420-620-350-550 102 13.05.01.000 INSIDE SUMP BLACK 104 06.09.02.000
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationRaccordi gasolio forati 1 via. Connections eye no beat. Bicones brass joints. Fittings for braking and diesel systems
Raccordi gasolio forati 1 via Tipo di materiale: acciaio Filettatura metrica Code Desc. d x L x pace 1450000100 6x15x1 1450000195 8x16x1 1450000200 8x16x1,25 1450000210 10x23x1 1450000212 10x18x1,25 1450000214
More informationHandwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
More informationVacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationSeal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
More informationSimple venturis, series GVP
Simple venturis, series GVP 5-bar compressed air network 45 13 5 35 L1 Exhaust D1 L 1/4 gas, 6x8 quick-connect or 4x6 quick-connect D 30 Connection for options 6 Vacuum 1/ gas Vacuum generators in series
More informationRODLESS CYLINDER SERIES PU ACTUATORS
RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic
More informationCatalog 080-/USA Notes Vacuum Control Valves
Vacuum Control Valves Section Catalog 080-/USA Notes Vacuum Control Valves Catalog 080-/USA Index Vacuum Control Valves VA0 Vacuum Control Valves for Centralized Vacuum Systems VA0PSV & VA0PSP, -Port,
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationSpare Parts List GS 14 / GS 15 GS 14 E / GS 15 E
win ter h lter Spare Parts List GS 14 / GS 15 GS 14 E / GS 15 E Edited: 03/97 Revised: 12/00 Part no.: 89002487 Summary Water supply Pages 1 and 2 SoftMatik (Softener) Pages 3 and 4 Tank heating and water
More informationPart-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
More informationFS20 Range of Fuel Selectors
FS20 Range of Fuel Selectors The FS20 range consists of 7 models of Fuel Selector which are currently available from Andair. From a simple ON/OFF shut off valve to a more complex 5 way selector (4 tanks
More informationaquakit U Specifications Last revision: 09/07/2016 aquabrass.com
aquakit U-22-007 Specifications Last revision: 09/07/2016 aquakit U-22-007 Specifications Last revision: 09/07/2016 DEMI-TOTEM 12123 1/2 thermostatic valve with 2-way or 3-way diverter - CALGreen High
More informationManually actuated valves
Manually actuated valves 3/2-5/2-5/3 spool valves with /8 - /4 - /2" NPT threaded ports, BSP version avaiable on request Installation in any position Comprehensive range of actuations Push/pull and lever
More informationVACUUM CUPS 2 SECTION 2 VACUUM CUPS 2: EDCO USA.
VACUUM S SECTION VACUUM S 01 EDCO USA. www.edcousa.net :1 VACUUM S CONTENTS BELLOWS S (B) DOUBLE BELLOWS S (B) BELLOWS TRACTION FOOT S (BF) MULTI-BELLOWS S (BL) DEEP S (D) FLAT S (F) FLAT CONCAVE S (FC)
More informationCode Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
More informationPIN VICES 02 2 DRILL 02 9 CUTTING BROACHES SMOOTHING BROACHES 02 13
02 PIN VICES 02 2 DRILL 02 9 CUTTING BROACHES 02 10 SMOOTHING BROACHES 02 13 PIN VICES i Pin vices are used to firmly hold items such as winding stems, cutting and smoothing broaches, drills, taps, wires,
More informationAriazone 5001 Automotive A/C Service Station
Ariazone 5001 Automotive A/C Service Station Spare Parts List 1 COMPONENT LOCATION AND IDENTIFICATION Ariazone 5001FAHD - Modules 1. Vacuum Pump 2.Recovery Pump (Compressor) 3. Oil Separator 4. Air Cooled
More informationHinges and Flap Fittings Furniture Hinges
Butt hinge Material: Steel Length: 50 mm Flange thickness: 1.5 mm Barrel Ø: 8 mm Crank A, straight Ø Gap1 mm Mounting Nickel plated matt Left 1.08.717 Right 1.08.708 Brass plated Left 1.08.511 Right 1.08.502
More informationAIR SANDERS & POLISHERS
AIR SANDERS & POLISHERS The most complete line of air finishing tools. Ingersoll Rand finishing tools are designed for long-life and swirl-free finishes. 49 4151-HL High Performance 150 mm Random Orbital
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationaquakit U Specifications Last revision: 09/07/2016 aquabrass.com
aquakit U-22-013 Specifications Last revision: 09/07/2016 DEMI-TOTEM 12123 1/2 thermostatic valve with 2-way or 3-way diverter - CALGreen High performance 1/2 thermostatic valve European made solid brass
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationEdition Subject to change without notice
Spare parts as torch MHS RAUCH-330 water-cooled r2500311 r2500411 r2500511 Torch / 3m EURO central adapter exhaust hose ID38mm Torch / 4m EURO central adapter exhaust hose ID38mm Torch / 5m EURO central
More informationACCESSORIES NETAFIM PRESET PRESSURE REGULATORS I BERMAD ADJUSTABLE REGULATORS NETAFIM PRESET PRESSURE REGULATORS BERMAD ADJUSTABLE REGULATORS
NETAFIM PRESET PRESSURE REGULATORS I BERMAD ADJUSTABLE REGULATORS NETAFIM PRESET PRESSURE REGULATORS Sealed regulating units which are field replaceable Zero leakage Built in pressure indicator signs when
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationMicro-venturis, series GVA
Micro-venturis, series GVA Reference V : vacuum outlet Coupling M F, 6 mm deep or Quick-connect coupling, tube 4 mm dia. or Male coupling, 4 mm dia.,. mm long ø. 4... Version GVA -- 44 GVASIL or GVASPO
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationFULL COLOR TAB #12 BTP
FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage
More informationBTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!
BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationSeries 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds
Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationHousing: black plastic Measuring element: copper spring. Protection rate: IP31 Threaded: axial type. Setting: 0 10 bar (0 150 psi)
DESCRIPTION The wide range of FI FILTRI indicators, covers all industrial applications. They are directly installed on the filter, and allow a complete control of the clogging level of the element. This
More informationSeries 20 D. Pressure switches for all-fluid technique Port sizes G 1 /4 and G 1 /2
Series 0 D Pressure switches for all-fluid technique Port sizes and Microswitch with gold-plated contacts (silver plated for outdoor variants) Plug-in connection to DIN 4650 Technical Data Fluid: Neutral
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationCompressed Air Conditioning. accessories. One Stop Shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools Compressed Air Conditioning and Accessories One Stop Shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationMetal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationAccessories. Chapter 16
Accessories Chapter 01 01 Accessories Rods for espagnolette locks Rod ø6 article-no. execution L pack. stock.0 steel nickel plated 00 1 pcs a.0 with plastic covered, brown 00 1 pcs a.5 with plastic covered,
More informationfunnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
More informationCombined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More information8. Illustrated Parts Lists
Hydraulics B 1-41 8. Illustrated Parts Lists To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use these five-column parts lists, and the accompanying illustrations,
More informationAccessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
More informationLIQUIDLINE PROGRAM. Connections for cooling water. dezincification-resistant brass. Messing. aluminium.
LIQUIDLINE PROGRAM Connections for cooling water dezincification-resistant brass Messing aluminium stainless steel 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY Over 30 patents,
More informationAriazone 5001 Automotive A/C Service Station
Ariazone 5001 Automotive A/C Service Station Spare Parts List Ariazone 5001 - Spare Part List 1 COMPONENT LOCATION AND IDENTIFICATION Ariazone 5001 - MODULES 1. Evacuation Pump 2.Recovery Pump 3. Oil Separator
More informationType 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
More informationSure-Feed Engineering Inc. PLACER STANDARD HOPPER. Operation & Parts Manual PLACER-STD_1
Engineering Inc. PLACER STANDARD HOPPER Operation & Parts Manual PLACER-STD_1 Engineering Inc SECTION 2 PLACER OWNERS MANUAL Table of Contents 1. Installation guide 2. Set-up/operation instructions 3.
More informationRichter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
More information8. Illustrated Parts Lists
Hydraulics B 1-43 8. Illustrated Parts Lists To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use these five-column parts lists, and the accompanying illustrations,
More informationLIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationalong with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.
Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE
More informationTAV 1 DUPLEX / CODE POS. DESCRIPTION X X Main Side Element /550 X X
TAV 1 DUPLEX 340-420-620 350/550 320 420 350620 550 CODE POS. DESCRIPTION X X 18.10.15 101 Main Side Element 420-620 350/550 X X 13.05.20 102 Kit Inside Sump Black X X 06.09.02 104 Gear Right H.S. (Metal
More informationStandard strokes (for all diameters) Stroke tolerance (ISO 15552)
Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel
More informationCarbon fiber gangways PRICE
Carbon fiber gangways MODELS LENGTH WIDTH MAX LOAD WEIGHT Alba 220 cm / solid (7' 2'') 39 cm 500 Kg 4.4 Kg 2.300 Aurora Open: 216 cm Closed: 108,8 cm / folding (7' 1'') 39 cm 500 Kg 5.6 Kg 3.950 Libera
More information1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationBimetal thermometer with Pt100 electrical output signal Model 54, stainless steel version
Mechatronic temperature measurement Bimetal thermometer with Pt100 electrical output signal Model 54, stainless steel version WIKA data sheet TV 15.01 Applications Twin-Temp Machine building, plant and
More informationAccessories product range
Accessories 199 Accessories product range Type SB/SBF (spiral tape) Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Page
More informationFunction Fittings, Flow Controls, and Accessory Valves
Section 3 Function Fittings, Flow ontrols, and Accessory Valves 12 VA Right Angle (anjo) Flow ontrol (inch-knob adj.)..fit-3-3 12 V Right Angle (anjo) Flow ontrol (inch-slot adj.)...fit-3-3 1 TA Right
More informationCOMPONENTS AND ACCESSORIES FOR VAN AND CONTAINERS
Hinges for van and containers E 55010 ZINC-PLATED HINGE E 55015 STAINLESS STEEL HINGE AISI 304 E 55030 E 55031 ZINC PLATED ANGULAR HINGE WITH BRASS BUSHES AISI 304 STAINLESS STEEL ANGULAR HINGE WITH BRASS
More informationPOMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO
POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO DIAPHRAGM PUMP Hydra-Cell Features Heavy-duty industrial construction Quiet, smooth operation Hydraulically balanced diaphragms Runs dry without damage Positive
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationDuplex Parts List - Diagram 01
145 146 144 124 141 110 112 113 114 128 122 143 126 142 111 135 134 134 107 108 109 110 134 112 121 121 134 121 134 113 113 135 102 124 105 106 114 126 116 139 138 104 140 119 120 118 136 137 124 129 101
More information