MHD Series. High Density Mixed Signal, Power and Coaxial Connectors. Technical Characteristics

Size: px

Start display at page:

Download "MHD Series. High Density Mixed Signal, Power and Coaxial Connectors. Technical Characteristics"

Abner Davidson
6 years ago
Views:

High ensity Mixed Signal, Power and Coaxial Connectors Ruggedized metal shell PCB connector, with shrouded plug for pin protection Signal and HE 80 cavities for power and coaxial contacts Male plug :

1 High ensity Mixed Signal, Power and Coaxial Connectors Ruggedized metal shell PCB connector, with shrouded plug for pin protection Signal and HE 80 cavities for power and coaxial contacts Male plug : Straight SMT termination emale receptacle : Straight - 90 termination Pitch: On mating side - Receptacle and plug mm/0.05 between contacts and rows On termination side: - Receptacle : mm/0.05 between contacts and rows mm/0. between the two central rows - Plug : mm alternate between contacts mm/0.05 between rows except the two central rows which is mm/0. Up to 400 signal contacts Mixed layout for signal and special contacts (Coax, Power & O) Technical Characteristics MATERIAL Insulator iallyl Phtalate UL94VO rame Aluminium Alloy Contacts Copper Alloy Guides Brass + Ni or Stainless steel CONTACT PLATING Ni + Au CONTACT RESISTANCE Signal < 12 mv Power < 2 mv T RANGE -55 C to +125 C SAETY O CONTACT Statical 2mm/0.09 ROM EXTRACTION ynamical 1.80mm/0.01 CURRENT RATING INSULATION Signal 3 Amps Power 15 Amps > 4 MV MECHANICAL ENURANCE 5000 operations ENGAGEMENT/withdrawal forces < 0.5N VOLTAGE RATING PROO VOLTAGE CONTACT IAMETER Signal Power 200V 800V mm 2.00mm IMPEANCE Coaxial contact 50 V SPECIAL CONTACTS According to NC

2 HYPERTAC & ESA - Ordering Information HYPERTAC MH ESA B SERIES ARRANGEMENT HA 1HB 6XA 2XA XB 3HB PART - POLARITY - PLATING Male Plug Standard plating emale Receptacle - Standard plating 1 5 Pretinned - Male Plug emale Receptacle - Pretinned TERMINATION STYLES 90 termination, PCB thickness SMT* - PCB thickness termination, PCB thickness 43 SMT* - PCB thickness termination, PCB thickness SMT* - uncentered PCB thickness Straight termination, PCB thickness 45 SMT* - uncentered PCB thickness Straight termination, PCB thickness SMT* - uncentered PCB thickness 41 SMT*- PCB thickness ** emale / male saver * Surface Mount Termination PCB thicknes is in mm ** Consult us GUIE STYLES

3 Single Arrangements Modules configuration Receptacle - Mating side views Mixed Arrangements 052 3HB XB 2XA 6XA 1HB 300 5HA ways module 50 ways module 4 ways module (special contacts) Space which can receive: 2x50 ways module or 2x26 ways module 1x4 ways module or 2x4 ways module Space which can receive: 2x26 ways module or 1x4 ways module 19

4 Standard plugging stages Misalignment Gap Tilting LONGITUINAL LATERAL LATERAL LONGITUINAL LATERAL Plug Receptacle Mated connectors min 0.40 Max 1 mm Acceptable Misaligment Max 0.0 mm Acceptable Misaligment min gap: 0.30mm Mounting examples ully mated pair 19.0 ± 0.25 ully mated pair ± ully mated pair female receptacle ully mated pair.60 ± ± male plug Extension board 90 male plug straight female receptacle isplacement Max displacement allowed while plugging in the receptacle: 0.15 mm in all plugged in connector ways. 198

5 Termination styles Receptacle THROUGH BOAR SOLER - 90 THROUGH BOAR SOLER - STRAIGHT RE : PCB : A = B = 6 Max RE : 30 PCB : A = min 4.00 Max A RE : 11 PCB : A = B = 6.60 Max *2.65 +/-0.05 B Ø A * RE : 31 PCB : A = 6. min 6.60 Max Ø 0.40 * Unbuild-up of tolerances THROUGH BOAR SOLER - 90 Plug THROUGH BOAR SOLER - STRAIGHT A * *2.65 +/-0.05 Ø0.40 RE : PCB : A = 5.95 Max RE : 12 PCB : A =.60 Max 5.15 RE : 30 PCB : A = min 4.00 Max RE : 31 PCB : A = 4.60 min 5. Max Ø0.40 A i * Unbuild-up of tolerances SURACE MOUNT (CENTERE PCB) i SURACE MOUNT (UNCENTERE PCB) A A RE : 41 PCB : A = 5.20 Max See section Contact point Maxi RE : 44 PCB : A = 4.40 Max See section Contact point Maxi RE : 42 PCB : A = 4.40 Max RE : 43 PCB : A = 4.80 Max i 0utlet section PCB side RE : 45 PCB : A = Max RE : 4 PCB : A = Max i 199

6 Connector dimensions 52 contacts Plug 0 contacts Plug. MH part number - Code date Ø Max. Ø MH part number - Code date Max 52 contacts Receptacle 0 contacts Receptacle MH part number - Code date Max.90 MH part number Max Code date *. 12 x = * * 24 x = * 5HA Plug 1HB Plug. MH part number - Code date. MH part number Code date Max Max 5HA Receptacle 1HB Receptacle 3 4 MH part number - Code date Max C MH part number Code date Max C X5.08=15.24 A B * 1 2 3X5.08= * 12x = A B * * Theoretical dimensions The termination side contact configurations are specified on board preparation details 200

7 Connector dimensions 152 contacts Plug. C Ø 89. Max 152 contacts Receptacle C Max * 12 x = * 24 x = * 6XA Plug 89. Max 6XA Receptacle Max * A B C * 3X5.08= x = X5.08=15.24 * Theoretical dimensions The termination side contact configurations are specified on board preparation details 201

8 Connector dimensions 200 contacts Plug. Ø Max 200 contacts Receptacle Max.935* * 24 x = x = * 2XA Plug E Max 2XA Receptacle * * Max X5.08= x = * 3X5.08= x = * Theoretical dimensions The termination side contact configurations are specified on board preparation details 202

9 Connector dimensions 252 contacts Plug E Ø 14 Max 252 contacts Receptacle E Max * 12 x = * 24 x = * 24 x = * XB Plug E Max XB Receptacle E Max * 3X5.08= X5.08= x = * 24 x = * * Theoretical dimensions The termination side contact configurations are specified on board preparation details 203

10 Connector dimensions 300 contacts Plug Max 300 contacts Receptacle Max * 24 x = * 24 x = * 24 x = * 3HB Plug Max 3HB Receptacle * Max 3X5.08= x= *.935* 24 x = x = * * Theoretical dimensions The termination side contact configurations are specified on board preparation details 204

11 Connector dimensions 352 contacts 400 contacts RECEPTACLE PLUG RECEPTACLE PLUG * * 12x = * 24 x = 45.2 Ø.935* 24 x = * 24 x = 45.2 G Max.935*.935* 24 x = x = Max G Max.935*.935* * 24 x = x = Max H H.. * Theoretical dimensions The termination side contact configurations are specified on board preparation details 205

12 Guiding devices Receptacle MH MH 00- Z122 MH 00- Z124 / Z134 MH 00- Z126 Polarised female guide transverse mounting (lenght: 5.50) Polarised female guide transverse mounting (lenght: ) emale guide transverse mounting P/N 124: A=6; 134: A=6.60 Unpolarised female guide vertical mounting 5.50 Max 5.50 Max 2 M2.50 Mass per set: 0.65 gramme 2 M2.50 Mass per set: 0.65 gramme Max M2 15N.cm* Ø2.50 A Max M Max 2 M2.50 Mass per set: 1.50 g. (P/N:124) MH 00- Z130 MH 00- Z131 MH 00- Z133 MH 00- Z190 All polarity female guide vertical mounting (lenght: 5.50) All polarity female guide vertical mounting (lenght: ) All polarity female guide transverse mounting Ground female guide vertical mounting Ø Max 2 M2.50 Max.40 2 M2.50 Max M2 Ø Max M Max epth:1 Ø1.90. Plug MH 00-1 MH 00- Z112 MH 00- Z125 MH 00- Z191 Polarised male guide transverse mounting Unpolarised male guide vertical mounting Unpolarised male guide transverse mounting Ground male contact transverse mounting 4 on flats nut 25 N.cm* 5.50 M2.50 Ø N.cm* N.cm*.30 15N.cm* Mass per set: 0.55.gramme Mass per set: 1.35.gramme Mass per st: 0.55.gramme 206

13 52 contact board preparation details (1) Straight termination receptacle guides: 121, 122, 126, 130, 131, termination receptacle guides: 124, 133, * 12 x = * * 12 x = * 2 holes min Ø holes min Ø * holes min Ø * 5.15 Straight termination plug guides: termination plug guides: 1, 125, holes min Ø * 25 x = * 52 holes min Ø * * holes min Ø * 25 x = * * 52 holes min Ø * 5.15 Surface mount termination plug guides: 1, 125, * 3.81 (contact point) Axis of tracks * * * * H view * G view * (1): see important note on 1HB preparation board details. 20

14 5 HA contact board preparation details (1) straight termination receptacle guides: 121, 122, 126, 130, 131, termination receptacle guides: 124, 133, holes min Ø x 5.08 = holes min Ø x 5.08 = * 8 holes min Ø Max 12 holes min Ø * 90 termination plug guides: 1, 125, 191 Surface mount termination plug guides: 1, 125, holes min Ø2. 3 x 5.08 = NO TRACKS Axis of tracks 2.20 (contact point) 3.30 Max 12 holes min Ø * * H view G view Other contact board preparations details shown on following pages (1): see important note on 1HB preparation board details. 208

15 0 contact board preparation details (1) Straight termination receptacle guides: 121, 122, 126, 130, 131, termination receptacle guides: 124, 133, * 24 x = * * 24 x = * 2 holes min Ø * 0 holes min Ø holes min Ø * 0 holes min Ø Straight termination plug guides: termination plug guides: 1, 125, holes min Ø * 49 x = * * 0 holes min Ø * holes min Ø * 49 x = * * 0 holes min Ø * 5.15 Surface mount termination plug guides: 1, 125, * 3.81 (Contact point) Axis of tracks * * * * * (1): see important note on 1HB preparation board details. 209

16 1 HB contact board preparation details (1) Straight termination receptacle guides: 121, 122, 126, 130, 131, termination receptacle guides: 124, 133, x 5.08 = x = * 3 x 5.08 = * 8 holes min Ø x = * * Max * * 12 holes min Ø termination plug guides: 1, 125, 191 Surface mount termination plug guides: 1, 125, * 25 x = * x 5.08 = holes min Ø NO TRACKS * 3.81 (contact point) * Axis of tracks Axis of tracks 2.20 (contact point) 3.30 Maxi * Max * * * (1) Important note rilling layouts shown concern the following full configurations: 052, 5HA, 0, 1HB. Other arrangements, shown on "MOULES CONIGURATION" page, require a specific drilling layout to ensure the correct mounting of the chosen connector, that you must obtain from our technical department. However, the drilling layouts shown above should help you to achieve the desired configuration. or that, you may have to mix those drilling layouts to obtain the right configuration. * Theoretical dimensions 2

17 Power & high frequency contacts (NC 93569) Example of contact overview ( r--) POWER CONTACTS Male P/N 90 termination R OG Straight termination R OG Solder bucket termination R OG emale P/N 90 termination R G1 Straight termination R G1 Solder bucket termination R G1 HIGH REQUENCY CONTACTS Male P/N emale P/N Vertical mounting, suitable for flexible cable Ø 1.9 Max. ref. KX 21 A (RG 18 B/U or RG 196) KMX 3-M 081 KMX Transverse mounting, suitable for flexible cable Ø 1.9 Max. ref. KX 21 A (Rg 18 B/U or RG 196) Usable with mother board, thickness 3.2mm Max KMX 3-M 092 KMX Vertical mounting, suitable for flexible cable Ø 2.5 Max. ref. KX 22 A (RG 316) KMX 3-M 1 KMX 3-1 Transverse mounting, suitable for flexible cable Ø 2.5 Max. ref. KX 22 A (RG 316) Usable with mother board, thickness 3.2mm Max KMX 3-M 112 KMX Vertical mounting, suitable to semi-rigid cable Ø 2.2 Max. ref. KS 1 A (RG UT 85) KMX 3-M 131 KMX Transverse mounting, suitable to semi-rigid cable Ø 2.2 Max. ref. KS 1 A (RG UT 85) Usable with mother board, thickness 3.2mm Max KMX 3-M 142 KMX Straight termination tail for direct mounting on to PCB KMX 3-M 032 KMX termination tail for direct mounting on to PCB KMX 3-M 041 KMX SMT termination KMX 3-M 12 KMX 3-12 EXTRACTION TOOLS P/N: S-03000CX

CONNECTOR SERIES. PCB High Density Connectors

CONNECTOR SERIES. PCB High Density Connectors MHD/mdd/mdp CONNECTOR SERIES PCB High Density Connectors Hyperboloid Technology Smiths Connectors offers an extensive range of superior contact technologies suitable for standard and custom solutions.