1.27mm DUAL ROW FEMALE HEADER
|
|
|
- Winfred Kennedy
- 5 years ago
- Views:
Transcription
1 1.27mm DUAL ROW FEMALE HEADER 1296 SERIES x 1.27mm(0.050 x ).SMT! Available in 8 through 100 circuits! Contact Material: Copper alloy! Insulator Material: Thermoplastic UL 94V-0! Suitable for high density 1.27mm pitch devices! Mates with 1.27 x 1.27mm pitch and 0.40mm square or! High reliability contact # round pin header! For other options consult the Sales Office Dimensional Information Ordering and Dimensional Information B A Circuit Size Part Number With cover Without cover A B T T (0.150) 5.48(0.216) T T102 5,08(0,200) 6,75(0,266) T T122 6,35(0,250) 8,02(0,316) T T142 7,62(0,300) 9,29(0,366) T T162 8,89(0,350) 10,56(0,416) T T182 10,16(0,400) 11,83(0,466) T T202 11,43(0,450) 13,10(0,516) T T222 12,70(0,500) 14,37(0,566) T T242 13,97(0,550) 15,64(0,616) T T262 15,24(0,600) 16,91(0,666) T T282 16,51(0,650) 18,18(0,716) T T302 17,78(0,700) 19,45(0,766) T T322 19,05(0,750) 20,72(0,816) T T342 20,32(0,800) 21,99(0,866) T T362 21,59(0,850) 23,26(0,916) T T382 22,86(0,900) 24,53(0,966) T T402 24,13(0,950) 25,80(1,016) T T422 25,40(1,000) 27,07(1,066) T T442 26,67(1,050) 28,34(1,116) T T462 27,94(1,100) 29,61(1,166) T T482 29,21(1,150) 30,88(1,216) T T502 30,48(1,200) 32,15(1,266) T T522 31,75(1,250) 33,42(1,316) T T542 33,02(1,300) 34,69(1,366) T T562 34,29(1,350) 35,96(1,416) T T582 35,56(1,400) 37,23(1,466) T T602 36,83(1,450) 38,50(1,516) T T622 38,10(1,500) 39,77(1,566) T T642 39,37(1,550) 41,04(1,616) T T662 40,64(1,600) 42,31(1,666) T T682 41,91(1,650) 43,58(1,716) T T702 43,18(1,700) 44,85(1,766) T T722 44,45(1,750) 46,12(1,816) T T742 45,72(1,800) 47,39(1,866) T T762 46,99(1,850) 48,66(1,916) T T782 48,26(1,900) 49,93(1,966) T T802 49,53(1,950) 51,20(2,016) T T822 50,80(2,000) 52,47(2,066) T T842 52,07(2,050) 53,74(2,116) T T862 53,34(2,100) 55,01(2,166) T T882 54,61(2,150) 56,28(2,216) T T902 55,88(2,200) 57,55(2,266) T T922 57,15(2,250) 58,82(2,316) T T942 58,42(2,300) 60,09(2,366) T T962 59,69(2,350) 61,36(2,416) T T982 60,96(2,400) 62,63(2,466) T T002 62,23(2,450) 63,90(2,516)! T = 13. Selective gold flash over 50µ nickel! T = µ selective gold over 50µ nickel! T = µ selective gold over 50µ nickel Note: In case of connectors with cap (Automatic mounting), add an R at the end of code.
2 CON. HEMBRA D/ FILA SMD 3.60 / 4.50 mm. SERIE Paso 1.27 mm. (0.050 ). Para soldar a PCB Características! Disponible de 6 a 100 contactos! Contactos de doble fleje en bronce fosforoso con! Conecta con regletas y conectores doble fila paso! diferentes acabados # 2.00 mm. y pines de 0.50 mm. de lado! Con o sin pivotes de fijación.! Material aislante: Nylon 6T UL 94V-0! Consultar opciones con el departamento comercial Figuras y dimensiones: Código: T- XX- P- L- E SERIE DEL CONECTOR 2. ACABADO DE LOS CONTACTOS $ T = 2. Estañado. $ T = 3. Flash de Oro sobre 1.27 µ de Ni. ACABADO RECOMENDADO $ T = µ de Oro sobre 1.27 µ de Ni. $ T = µ de Oro sobre 1.27 µ de Ni. 3. NÚMERO DE CONTACTOS $ Disponible de 6 a 100 circuitos (Para 100 circuitos sustituir XX por 00) 4. SISTEMA DE FIJACIÓN $ P = 1. Sin pivotes $ P = 2. Con pivotes 5. ALTURA DEL CONECTOR DIMENSIONES: XX XX XX A = B = C = XX = Número de circuitos $ L = 1. H = 3.60 mm. $ L = 2. H = 4.50 mm. 6. EMPAQUETADO DEL CONECTOR $ E = 3. FILM + TUBO $ E = 4. FILM + ROLLO $ E = 5. TUBO + PAD METÁLICO $ E = 6. ROLLO + PAD METÁLICO
3 1.27mm DUAL ROW FEMALE HEADER 1298 SERIES x 1.27mm(0.050 x ).SMT Available in 8 through 100 circuits Insulator Material: Thermoplastic UL 94V-0 Mates with 1.27 x 1.27mm pitch and 0.40mm square or round pin header Contact Material: Copper alloy Top and bottom entry of male header High reliability contact For other options consult the Sales Office Dimensional Information Ordering and Dimensional Information Circuit Size Part Number Without Pegs With Pegs A B T081E 1298-T082E 2,54(0,100) 4,21(0,165) T081E 1298-T082E 3,81(0,150) 5,48(0,216) T101E 1298-T102E 5,08(0,200) 6,75(0,266) T121E 1298-T122E 6,35(0,250) 8,02(0,316) T141E 1298-T142E 7,62(0,300) 9,29(0,366) T161E 1298-T162E 8,89(0,350) 10,56(0,416) T181E 1298-T182E 10,16(0,400) 11,83(0,466) T201E 1298-T202E 11,43(0,450) 13,10(0,516) T221E 1298-T222E 12,70(0,500) 14,37(0,566) T241E 1298-T242E 13,97(0,550) 15,64(0,616) T261E 1298-T262E 15,24(0,600) 16,91(0,666) T281E 1298-T282E 16,51(0,650) 18,18(0,716) T301E 1298-T302E 17,78(0,700) 19,45(0,766) T321E 1298-T322E 19,05(0,750) 20,72(0,816) T341E 1298-T342E 20,32(0,800) 21,99(0,866) T361E 1298-T362E 21,59(0,850) 23,26(0,916) T381E 1298-T382E 22,86(0,900) 24,53(0,966) T401E 1298-T402E 24,13(0,950) 25,80(1,016) T421E 1298-T422E 25,40(1,000) 27,07(1,066) T441E 1298-T442E 26,67(1,050) 28,34(1,116) T461E 1298-T462E 27,94(1,100) 29,61(1,166) T481E 1298-T482E 29,21(1,150) 30,88(1,216) T501E 1298-T502E 30,48(1,200) 32,15(1,266) T521E 1298-T522E 31,75(1,250) 33,42(1,316) T541E 1298-T542E 33,02(1,300) 34,69(1,366) T561E 1298-T562E 34,29(1,350) 35,96(1,416) T581E 1298-T582E 35,56(1,400) 37,23(1,466) T601E 1298-T602E 36,83(1,450) 38,50(1,516) T621E 1298-T622E 38,10(1,500) 39,77(1,566) T641E 1298-T642E 39,37(1,550) 41,04(1,616) T661E 1298-T662E 40,64(1,600) 42,31(1,666) T681E 1298-T682E 41,91(1,650) 43,58(1,716) T701E 1298-T702E 43,18(1,700) 44,85(1,766) T721E 1298-T722E 44,45(1,750) 46,12(1,816) T741E 1298-T742E 45,72(1,800) 47,39(1,866) T761E 1298-T762E 46,99(1,850) 48,66(1,916) T781E 1298-T782E 48,26(1,900) 49,93(1,966) T801E 1298-T802E 49,53(1,950) 51,20(2,016) T821E 1298-T822E 50,80(2,000) 52,47(2,066) T841E 1298-T842E 52,07(2,050) 53,74(2,116) T861E 1298-T862E 53,34(2,100) 55,01(2,166) T881E 1298-T882E 54,61(2,150) 56,28(2,216) T901E 1298-T902E 55,88(2,200) 57,55(2,266) T921E 1298-T922E 57,15(2,250) 58,82(2,316) T941E 1298-T942E 58,42(2,300) 60,09(2,366) T961E 1298-T962E 59,69(2,350) 61,36(2,416) T981E 1298-T982E 60,96(2,400) 62,63(2,466) T001E 1298-T002E 62,23(2,450) 63,90(2,516) E = Packing Options E = 1. PAD + TUBE E = 2. PAD + REEL E = 5. METAL PAD + TUBE E = 6. METAL PAD + TUBE T = 2. Tin plated T = 3. Gold flash over 50µ nickel T = 5. 15µ gold over 50µ nickel T = 6. 30µ gold over 50µ nickel
4 1.27mm STRAIGHT PCB SOCKET SMT 1302 SERIES SERIES x 1.27mm(0.050 x ). For PCB Solder! Available in 10 through 100 circuits! Contact Material: Copper alloy with different plating! Mates with 1299 and 1300 series and 1.27 x 1.27mm # options # dual row connectors! Profile: 4.40mm! 0.40mm Square Pin! With fixing post and cap option! Insulator Material: Thermoplastic UL 94V-0! For other options consult the Sales Office Dimensional Information Ordering and Dimensional Information Circuit Size Part Number A B C T101 6,35(0,250) 7,62(0,300) 8,12(0,320) T121 7,62(0,300) 8,89(0,350) 9,39(0,370) T141 8,89(0,350) 10,16(0,400) 10,66(0,420) T161 10,16(0,400) 11,43(0,450) 11,93(0,470) T181 11,43(0,450) 12,70(0,500) 13,20(0,520) T201 12,70(0,500) 13,97(0,550) 14,47(0,570) T221 13,97(0,550) 15,24(0,600) 15,74(0,620) T241 15,24(0,600) 16,51(0,650) 17,01(0,670) T261 16,51(0,650) 17,78(0,700) 18,28(0,720) T281 17,78(0,700) 19,05(0,750) 19,55(0,770) T301 19,05(0,750) 20,32(0,800) 20,82(0,820) T321 20,32(0,800) 21,59(0,850) 22,09(0,870) T341 21,59(0,850) 22,86(0,900) 23,36(0,920) T361 22,86(0,900) 24,13(0,950) 24,63(0,970) T381 24,13(0,950) 25,40(1,000) 25,90(1,020) T401 25,40(1,000) 26,67(1,050) 27,17(1,070) T421 26,67(1,050) 27,94(1,100) 28,44(1,120) T441 27,94(1,100) 29,21(1,150) 29,71(1,170) T461 29,21(1,150) 30,48(1,200) 30,98(1,220) T481 30,48(1,200) 31,75(1,250) 32,25(1,270) T501 31,75(1,250) 33,02(1,300) 33,52(1,320) T521 33,02(1,300) 34,29(1,350) 34,79(1,370) T541 34,29(1,350) 35,56(1,400) 36,06(1,420) T561 35,56(1,400) 36,83(1,450) 37,33(1,470) T581 36,83(1,450) 38,10(1,500) 38,60(1,520) T601 38,10(1,500) 39,37(1,550) 39,87(1,570) T621 39,37(1,550) 40,64(1,600) 41,14(1,620) T641 40,64(1,600) 41,91(1,650) 42,41(1,670) T661 41,91(1,650) 43,18(1,700) 43,68(1,720) T681 43,18(1,700) 44,45(1,750) 44,95(1,770) T701 44,45(1,750) 45,72(1,800) 46,22(1,820) T721 45,72(1,800) 46,99(1,850) 47,49(1,870) T741 46,99(1,850) 48,26(1,900) 48,76(1,920) T761 48,26(1,900) 49,53(1,950) 50,03(1,970) T781 49,53(1,950) 50,80(2,000) 51,30(2,020) T801 50,80(2,000) 52,07(2,050) 52,57(2,070) T821 52,07(2,050) 53,34(2,100) 53,84(2,120) T841 53,34(2,100) 54,61(2,150) 55,11(2,170) T861 54,61(2,150) 55,88(2,200) 56,38(2,220) T881 55,88(2,200) 57,15(2,250) 57,65(2,270) T901 57,15(2,250) 58,42(2,300) 58,92(2,320) T921 58,42(2,300) 59,69(2,350) 60,19(2,370) T941 59,69(2,350) 60,96(2,400) 61,46(2,420) T961 60,96(2,400) 62,23(2,450) 62,73(2,470) T981 62,23(2,450) 63,50(2,500) 64,00(2,520) T001 63,50(2,500) 64,77(2,550) 65,27(2,570)! T = 13. Selective gold flash over 50µ nickel! T = µ selective gold over 50µ nickel! T = µ selective gold over 50µ nickel Note: In case of connectors with cap (Automatic mounting), add an R at the end of code.
5 1.27mm DUAL ROW SMT FEMALE HEADER 1287 SERIES x 2.54mm(0.050 x ).SMT! Available in 6 through 100 circuits! Low profile and High density is suitable for devices which! Insulator Material: Nylon 6-T UL 94V-0 # require small and light internal parts! Mates with 1.27 X 2.54mm dual row housing and socket! High reliability contact structure provides normal insertion! 0.46mm square or round pin # force after repeated cycles! Profile: 6.00mm! For other options consult the Sales Office # Dimensional Information Ordering and Dimensional Information Circuit Size Part Number Without pegs With pegs A B T T (0.100) 4,21(0,166) T T082 3,81(0,150) 5,48(0,216) T T102 5,08(0,200) 6,75(0,266) T T122 6,35(0,250) 8,02(0,316) T T142 7,62(0,300) 9,29(0,366) T T162 8,89(0,350) 10,56(0,416) T T182 10,16(0,400) 11,83(0,466) T T202 11,43(0,450) 13,10(0,516) T T222 12,70(0,500) 14,37(0,566) T T242 13,97(0,550) 15,64(0,616) T T262 15,24(0,600) 16,91(0,666) T T282 16,51(0,650) 18,18(0,716) T T302 17,78(0,700) 19,45(0,766) T T322 19,05(0,750) 20,72(0,816) T T342 20,32(0,800) 21,99(0,866) T T362 21,59(0,850) 23,26(0,916) T T382 22,86(0,900) 24,53(0,966) T T402 24,13(0,950) 25,80(1,016) T T422 25,40(1,000) 27,07(1,066) T T442 26,67(1,050) 28,34(1,116) T T462 27,94(1,100) 29,61(1,166) T T482 29,21(1,150) 30,88(1,216) T T502 30,48(1,200) 32,15(1,266) T T522 31,75(1,250) 33,42(1,316) T T542 33,02(1,300) 34,69(1,366) T T562 34,29(1,350) 35,96(1,416) T T582 35,56(1,400) 37,23(1,466) T T602 36,83(1,450) 38,50(1,516) T T622 38,10(1,500) 39,77(1,566) T T642 39,37(1,550) 41,04(1,616) T T662 40,64(1,600) 42,31(1,666) T T682 41,91(1,650) 43,58(1,716) T T702 43,18(1,700) 44,85(1,766) T T722 44,45(1,750) 46,12(1,816) T T742 45,72(1,800) 47,39(1,866) T T762 46,99(1,850) 48,66(1,916) T T782 48,26(1,900) 49,93(1,966) T T802 49,53(1,950) 51,20(2,016) T T822 50,80(2,000) 52,47(2,066) T T842 52,07(2,050) 53,74(2,116) T T862 53,34(2,100) 55,01(2,166) T T882 54,61(2,150) 56,28(2,216) T T902 55,88(2,200) 57,55(2,266) T T922 57,15(2,250) 58,82(2,316) T T942 58,42(2,300) 60,09(2,366) T T962 59,69(2,350) 61,36(2,416) T T982 60,96(2,400) 62,63(2,466) T T002 62,23(2,450) 63,90(2,516)! T = 2. Tin plated! T = 3. Gold flash over 50µ" nickel! T = 5. 15µ gold over 50µ nickel! T = 6. 30µ gold over 50µ nickel
6 1.27mm DUAL ROW FEMALE HEADER 1288 SERIES x 2.54mm(0.050 x ).SMT! Available in 6 through 100 circuits! Profile: 4.62mm! Insulator Material: Nylon 6-T UL 94V-0! Low profile and High density! Mates with 1.27 X 2.54mm Pitch and 0.46mm square! High reliability contact # or round pin header! For other options consult the Sales Office # Dimensional Information Ordering and Dimensional Information B A RECOMMENDED PCB LAYOUT Circuit Size Part Number A B T081 5,08(0,200) 6,35(0,250) T101 6,35(0,250) 7,62(0,300) T121 7,62(0,300) 8,89(0,350) T141 8,89(0,350) 10,16(0,400) T161 10,16(0,400) 11,43(0,450) T181 11,43(0,450) 12,70(0,500) T201 12,70(0,500) 13,97(0,550) T221 13,97(0,550) 15,24(0,600) T241 15,24(0,600) 16,51(0,650) T261 16,51(0,650) 17,78(0,700) T281 17,78(0,700) 19,05(0,750) T301 19,05(0,750) 20,32(0,800) T321 20,32(0,800) 21,59(0,850) T341 21,59(0,850) 22,86(0,900) T361 22,86(0,900) 24,13(0,950) T381 24,13(0,950) 25,40(1,000) T401 25,40(1,000) 26,67(1,050) T421 26,67(1,050) 27,94(1,100) T441 27,94(1,100) 29,21(1,150) T461 29,21(1,150) 30,48(1,200) T481 30,48(1,200) 31,75(1,250) T501 31,75(1,250) 33,02(1,300) T521 33,02(1,300) 34,29(1,350) T541 34,29(1,350) 35,56(1,400) T561 35,56(1,400) 36,83(1,450) T581 36,83(1,450) 38,10(1,500) T601 38,10(1,500) 39,37(1,550) T621 39,37(1,550) 40,64(1,600) T641 40,64(1,600) 41,91(1,650) T661 41,91(1,650) 43,18(1,700) T681 43,18(1,700) 44,45(1,750) T701 44,45(1,750) 45,72(1,800) T721 45,72(1,800) 46,99(1,850) T741 46,99(1,850) 48,26(1,900) T761 48,26(1,900) 49,53(1,950) T781 49,53(1,950) 50,80(2,000) T801 50,80(2,000) 52,07(2,050) T821 52,07(2,050) 53,34(2,100) T841 53,34(2,100) 54,61(2,150) T861 54,61(2,150) 55,88(2,200) T881 55,88(2,200) 57,15(2,250) T901 57,15(2,250) 58,42(2,300) T921 58,42(2,300) 59,69(2,350) T941 59,69(2,350) 60,96(2,400) T961 60,96(2,400) 62,23(2,450) T981 62,23(2,450) 63,50(2,500) T001 63,50(2,500) 64,77(2,550)! T = 13. Selective gold flash over 50µ nickel! T = µ selective gold over 50µ nickel! T = µ selective gold over 50µ nickel Note: In case of connectors with cap (Automatic mounting), add an R at the end of code
1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
Single 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Picoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
STRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
Features/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
Interconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
MAXIMUM. Mill-Max Introduces Gull Wing SMT.070 Pitch ShrinkDIP & SIP Sockets and Headers
MAXIMUM solutions Mill-Max Introduces Gull Wing SMT.070 Pitch ShrinkDIP & SIP Sockets and Headers Mill-Max series 117, 127, 217 & 227 shrinkdip sockets accommodate memory chips and components which have
06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
CMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
E-Mark s business philosophy centers upon providing. each of its customers with maximum value. operates out of its facility in Shelton, Connecticut.
Company Profile E-Mark s business philosophy centers upon providing each of its customers with maximum value. This includes product quality appropriate for the application, accurate delivery & competitive
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CCF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 25.4 x 14.9
Surface Mount Terminal Blocks. 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 930-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing - 2-12 poles PICTURES 930-D-SMD-DS TECHNICAL INFORMATION Description The floating terminal contacts ensure total co-planar
Directory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
MICRO-CONNECTOR CMM SERIES
MICRO-CONNECTOR CMM SERIES CMM Series Micro-connectors NICOMATIC specializes in the design, development and manufacture of electronic connectors. The CMM MICRO CONNECTOR interconnection system is a 2mm
Mini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
CONEC SnapLock. 1 Introduction
CONEC SnapLock 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional screwing. A spring-loaded clip integrated
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
Adam Technologies, Inc.
INTRODUCTION: Adam Tech SMT PLCC Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a " centerline grid. They conform to JDC MS 016
Surface Mount Terminal Blocks. 120-M-221-SMD 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5
page 1/5 Surface Mount Terminal Blocks 120-M-221-SMD 5.00 mm (0.197 in) Spacing - 2-24 poles PICTURES 120-M-221-SMD 120-M-221-SMD & 120-D-111 TECHNICAL INFORMATION Description US Patent # 7,207,811 B2
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
APPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
Crimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
ORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
Multi-Pole Rectangular Connectors Specifications Table
Multi-Pole Rectangular Connectors Specifications Table Multi-Pole Rectangular Connectors Specifications Table Number of Poles Rating Insulation Resistance Dielectric Strength Contact Resistance Insertion
PHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
Surface Mount Terminal Blocks. 971-SLK-THR 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION APROVAL INFORMATION.
page 1/5 Surface Mount Terminal Blocks 971-SLK-THR 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLK-THR 971-SLK-THR & 950-HAF-DS TECHNICAL INFORMATION Description Pinstrip Typical application Technical
Surface Mount Terminal Blocks. 950-D-SMD-DS 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 950-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 950-D-SMD-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-D-SMD-DS TECHNICAL INFORMATION Description 5 mm spacing, surface mount adapted terminal block for
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CIF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Dimensions: 18.4 x 15.5
Surface Mount Terminal Blocks. 971-SLR-SMD mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 971-SLR-SMD-1.
page 1/5 Surface Mount Terminal Blocks 971-SLR-SMD-1.1 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLR-SMD-1.1 TECHNICAL INFORMATION Description US Patent # 6.224.399 B1 Canadian Patent # 2,307,922
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
0.5mm Pitch SMT Board-to-Board Connector
0.5mm Pitch SMT Board-to-Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
RM 5 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 204 Matching handle B63399 204 Adjusting screw B65539 B65806 204 Core B65805 98 Clamps B65806 20 Insulating
HPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
Component Specification
1.0 DESCRIPTION OF CONNECTOR AND INTENDED APPLICATION. The M80 series stamped female Trio-Tek open barrel crimp contact and rectangular Trio-Tek crimp housing form part of the Datamate J-Tek range of 2mm
CSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
Surface Mount Terminal Blocks. 971-SLR-THR 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 971-SLR-THR
page 1/5 Surface Mount Terminal Blocks 971-SLR-THR 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLR-THR TECHNICAL INFORMATION Description Standoffs underneath the molding prevent bottom of molding
0.5mm Pitch SMT Board to Board Connector
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
RoHS 2002/95/EC GREEN ELECTRONICS CVF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
7HERRAJES PARA PUERTAS DOOR FITTINGS
7HERRAJES PARA PUERTAS DOOR FITTINGS 7.1. Herrajes para puerta de madera 7.1. Fittings for Wooden Door 7.05 Manillas 7.05 Lever Handles 7.07 7.07 7.08 7.11 7.13 Condenas WC Tiradores puerta corredera Bisagras
EMC Shielding Introduction. RFI Shield Clips Summary EMC SHIELDING.
EMC Shielding Introduction Harwin provides a range of Surface Mount Shield Clips, compatible Shield Cans, and a comprehensive selection of Spring Contacts, to solve a variety of EMC/RFI and grounding issues.
EPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS CTF. Connectors
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 Connectors Functional characteristics Dimensional class: low RoHS 2011/65/EU Standard colour: green Dimensions: 11.1 x 15.5 mm
RoHS 2002/95/EC GREEN ELECTRONICS CSF. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS CSF Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
RM 6 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 220 Matching handle B63399 220 Adjusting screw B65659 220 Core B65807 212 Clamps B65808 217 Insulating
D-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
Ì Tripolarized mating
- IDC Page Discrete IDC D-Subminiature... 1675 High Density IDC 0.025" Cable Pitch... 1657 Discrete PCB Mounted IDC... 1674 High Density IDC 0.033" Cable Pitch... 1658 Distribution Systems... 1682 IDT
APPLICATION SPECIFICATION
1.0 SCOPE This specification covers the requirements for the application of Mega-Fit 5.70 mm pitch wire to board connector systems. 2.0 PRODUCT NAME AND SERIES NUMBERS Mega-Fit Female Crimp Terminal 76823
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
Cómo decidir la potencia por rack y las características de los gabinetes en proyectos de Centros de Cómputo modernos
Cómo decidir la potencia por rack y las características de los gabinetes en proyectos de Centros de Cómputo modernos Víctor Daniel Bañuelos Lugo Technical Manager Latin America Chatsworth Products CDCDP
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS. Ideal contacts for A AA AAA N Contacts available for.062 and.093
BATTERY CONTACTS A AA AAA N SIZE PC BUTTON & SPRING CONTACTS Ideal contacts for A AA AAA N Contacts available for.062 and.093 size batteries. thick PC boards Space saving design installs directly onto
Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
DL SERIES N-01. Features
N-01 Features Structure Connector M Connector F After setting retainer After setting retainer N-02 Terminal (UNIT: mm) For terminal selection, please contact our sales staff. 025 0.64.3 2 1.5 15.5 M(8100-4028)
RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
Waterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
Dynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Series (Progressive / Progresivo)
10 20 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through the shaft. Fijación al eje por chavetas y entrada de aceite por el eje.
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
NP276 Series (Open Top)
Ball Grid Array (BGA, 1.27mm Pitch) Specifications Insulation Resistance: Dielectric Withstanding Voltage: Contact Resistance: Operating Temperature Range: Contact Force: Mating Cycles: Materials and Finish
PCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
CIF CONNECTORS. Functional Characteristics. Brief Description. RoHS 2002/95/EC. Dimensional Class: Medium. Standard Colour: Green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET STD PRODUCTS CONNECTORS Functional Characteristics Dimensional Class: Medium Standard Colour: Green Dimensions: 18.4 x 15.5 mm (.724 x.610 in) Max Approved Wire
Ø300 Ø400. Características eléctricas Electrical specifications Ø600. Voltaje de entrada: V AC * Input voltage
CC CARREFOUR PATERNA / Valencia / España 2017 122 INTERIOR - ILUMINACIÓN CONTRACT INDOOR - CONTRACT LIGHTING MOON LIGHT INDOOR LED 46W a 290W 46 lm/w Características mecánicas Mechanical specifications
DIN WIRE APPLICATIONS Housings for wire applications are delivered without contacts. Contacts have to be ordered separately.
/Trim trio Description The PI 43 series is a 43 position two part plug and receptacle connector system designed to style C dimensions. It can be use in wire applications as well as in board applications
Peel-off & Pull-out forces for WECO SMD-connectors State:
Peel-off & Pull-out forces for WECO SMD-connectors State: 02.2015 General note: The pull-out or peel-off forces of the solder joint are depending also on the quality of the solder joint and the PCB as
RoHS 2002/95/EC GREEN ELECTRONICS CRM. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS CONNECTORS
HYDRAULIC CLUTCH-BRAKE SERIES
HYDRAULIC CLUTCH-BRAKE SERIES SERIES DE FRENO- EMBRAGUES HIDRáULICOS GOIZPER 21 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through
AMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Datasheet. DOWNITO 70 Square. 22/08/18 Grupo MCI
Datasheet DOWNITO 70 Square 22/08/18 Grupo MCI DOWNITO 70 Square UGR
Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
PSM PLURIMA. Functional characteristics. Brief description. RoHS 2002/95/EC. Dimensional class: medium. Standard colour: green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA Functional characteristics Dimensional class: medium Standard colour: green Heights: 35.6 mm, 25.2 mm, 14.8 mm (1.40 in,.99 in,.58 in)
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
RoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MPP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MPP Terminal Blocks Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 39 mm (15.35 in) 0 10 ½ 20 Max approved
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
TH 025 CONNECTOR SERIES
TH 025 CONNECTOR SERIES for the Automotive Industry TE AUTOMOTIVE /// TH 025 CONNECTOR SERIES TH 025 CONNECTOR SERIES for the Automotive Industry High density in limited spaces Product Features n TH 025
38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
Product Specification Rev A
Product Specification 108-6116 1. Scope :.5 Signal DBL Lock Connector 18P 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
EMC Shielding. Contents
EMC Shielding Contents Introduction SMT Shielding Clips Shielding Cans for SMT Clips Spring Contacts Positive Stop Extended (Antenna) Box Style Multi-Directional Development Kit EMC Shielding Introduction
AMPSEAL 16* Connector System 24 JUN 13 Rev C
Application Specification 114-13065 AMPSEAL 16* Connector System 24 JUN 13 i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features
Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components.
Saturnia Oskar Cerezo
11 2013 REV-02-2013 SATURNIA SATURNIA. Rings of light. Handcrafted suspension lamp designed for LZF by the Spanish designer, available in 3 sizes. On the one hand, the diffused light flowing through the
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE