Swivel Joints Flexmaster Joints

Transcription

1 FITTING INX Section Pages 5-67 Fittings dapters and Tube Fittings 8-8 escription Page Global Crimp Fittings...74 Global OTC (Over the Cover)...74 Global Skive Nipples...74 Global Socket ata...7 Global TTC (Thru the Cover) 74 Global TTC...74 Global Spiral TTC...00 Section Pages Swivel Joints 9-44 Flexmaster Joints FLOCS 6-67 escription Page to Fitting Reference Chart...69 ow to Order...70 Internal Skive Crimp Fittings...3 LifeSaver Fittings...46, 54, 56, 63 O-Rings 78 PTF Crimp Fittings...40 Reusable Fittings...45 Section Quick isconnect Couplings ccess., quipment & ssembly Instructions Pages Technical ata escription Page Socket ata Crimp...7 Reusable...73 Socketless...68 Spiral Single Skive Crimp Fittings...08 Split Flanges...76 Suction Fittings...43 Super Gem...74 Swage Fittings RTURN TO CONTNTS PG

2 OS TO FITTING PG RFRNC CRT OS PRT NO. CRIMP PTF CRIMP NIPPLS OTC CRIMP GLOBL TTC TTC SPIRL TTC INTRNL SKIV SPIRL SINGL SKIV SOCKTS SWG RUSBL RUSBL SOCKTS CR70 Contact aton eroquip for fitting information FC FC FC FC FC FC FC FC5 73 FC FC FC FC FC FC FC FC FC FC33 68 FC FC35 73 FC FC FC FC FC FC FC FC376 FC377 Contact aton eroquip for fitting information Contact aton eroquip for fitting information FC44 FC FC FC469 Contact aton eroquip for fitting information FC FC505 FC FC555 FC558 Contact aton eroquip for fitting information FC FC579 7 FC FC6 74 FC66 FC OS PRT NO. FC FC639 7 FC FC659 FC FC FC699 CRIMP PTF CRIMP NIPPLS OTC FC70 39 FC70 39 FC FC FC G G34 Contact aton eroquip for fitting information G G G G G OS TO FITTING CRT CRIMP GLOBL TTC TTC INTRNL SKIV SPIRL SINGL SKIV G G G G RUSBL G SPIRL TTC SOCKTS SWG RUSBL SOCKTS 69

3 OW TO ORR WRNING ow to order ccurate processing and prompt delivery of your order depend on easy identification of your requirements. Please order eroquip parts using correct part numbers as described in this catalog. Inquiries and orders should be directed to your eroquip istributor or: aton eroquip Industrial ivision 3000 Strayer Road, P.O. Box 63 Maumee, Ohio / ; Fax: 49/ Part numbers and dash sizes ash size designates the nominal size in 6ths of an inch. This number immediately follows the part number and is separated from it with a dash. Fittings with FC or FJ part numbers will have the size expressed in four numerals. The first two numerals indicate the size of the connecting end and the second two numerals indicate the size of the hose end. ll other fittings are followed by a dash number which is the nominal size of the fitting expressed in 6ths of an inch. Where two dash numbers are given, the first one generally indicates the pipe or port size and the second indicates the tube or hose size. The hose dash number should always be the same as the last dash number on the fitting. Material designation Most fittings in this catalog have a material designation as part of the part number. n explanation is shown below. 38 Brass nipple, steel socket B Brass 44 Bronze nipple and nut: C Stainless steel brass socket luminum alloy 63 Brass nipple, steel nut S Steel and socket Stainless steel 449 Malleable iron imensions imensions given in this catalog for eroquip products are approximate and should be used for reference only. xact dimensional information for a given product is subject to change and varying tolerances; contact aton eroquip directly for full current information. eroquip manufactures the terminal ends of our hose fittings to the appropriate requirements established by the S. Therefore, the performance ratings of these hose fittings meet the S requirements. It is possible to order a hose assembly with a fitting terminal end that has a performance rating lower than the hose rating. When ordering hose assemblies, please keep the terminal end performance rating in mind since this may affect overall hose assembly performance. Many hose assembly components (hose and fittings) are easily assembled in the field. owever, factory assembled swaged, crimped and reusable hose assemblies are available. For complete information, contact aton eroquip. MIXING/MTCING ROQUIP FITTING TOLRNCS R NGINR TO MTC ROQUIP OS TOLRNCS. T US OF ROQUIP ON OS SUPPLI BY OTR MNUFCTURRS N/OR T US OF ROQUIP OS WIT SUPPLI BY OTR MNUFCTURRS MY RSULT IN T PROUCTION OF UNRLIBL N UNSF OS SSMBLIS N IS NITR RCOMMN NOR UTORIZ BY ROQUIP. ROQUIP SLL NOT B SUBJCT TO N ISCLIMS NY OBLIGTIONS OR LIBILITIS (INCLUING BUT NOT LIMIT TO LL CONSQUNTIL, INCINTL N CONTINGNT MGS) RISING OUT OF BRC OF CONTCT OR OF WRRNTY OR RISING FROM TORT CLIMS (INCLUING WITOUT LIMITTION NGLIGNC N STRICT LIBILITY) OR OTR TORIS OF LW WIT RSPCT TO NY OS SSMBLIS NOT PROUC FROM GNUIN ROQUIP, OS N ROQUIP PPROV QUIPMNT, N IN CONFORMNC WIT ROQUIP PROCSS N PROUCT INSTRUCTIONS FOR C SPCIFIC OS SSMBLY. FILUR TO FOLLOW ROQUIP PROCSS N PROUCT INSTRUCTIONS N LIMITTIONS COUL L TO PRMTUR OS SSMBLY FILURS RSULTING IN PROPRTY MG, SRIOUS INJURY OR T. Globally Standardized Pressure Ratings eroquip has standardized hose burst and operating pressure ratings in cataloging, worldwide. This move toward standardization will slightly alter some of the pressures ratings listed for hoses in this catalog as pressures are rounded off. This is a paper conversion only. This action has no effect on the actual testing and certification of eroquip hoses to stringent product standards. * Specifications and dimensions on this catalogue are subject to change without notice. SFTY PRCUTIONS: Read the instruction manual carefully and thoroughly before using the product, and then use it correctly. 70

4 OW TO ORR Global Crimp Sockets, Nipples and Fittings Global Part Numbering System Part numbers collapse to the shortest possible number of digits: It is assumed that a global fitting has a straight configuration unless a code is added to designate otherwise. e.g., S8FJ8 has a straight configuration S8FJ8 has a 45 elbow configuration ashes and unnecessary zeros are not used. e.g., /4 is designated by 4 not 4 or 04 5 /8 is designated by 0 not 0 Global Crimp Sockets Complete socket number: S 8 Global -piece part number Wire braid construction = Single wire braid B = ouble wire braid size* Global Material esignation Global crimp nipples, sockets and fittings standard material is zinc plated carbon steel. Items so designated in catalog available in stainless steel. Global Crimp Nipples/Fittings Complete nipple part number: S 8 FJ 8 Product group code S = Global -piece part number = TTC fitting part number B = TTC fitting part number G = OTC Global fitting part number = Spiral TTC fitting part number for four-spiral hose Z = Spiral TTC fitting part number for six-spiral hose Material stock code If material is round stock, then this position collapses. = inch hex stock (metric hex, this position collapses) For /4 Braided Fittings: P = wire braid hose socket with no hex R = wire braid hose socket with inch hex T = wire braid hose socket with no hex V = wire braid hose socket with inch hex nd connection size* nd connection code BF = BSP Female Swivel FR = Female ORS ( hex) FS = Female S Swivel BP = BSP Male Parallel JF = JIS Female Swivel BT = BSP Male Tapered JM = BSP Female Swivel CT = Cat Flange ( hexes) K = 4 Male (light duty) KF = Komatsu Female L = KO Female Swivel Swivel (light duty) KS = Komatsu Split Flange S = KO Female Swivel MB = Male Boss O-Ring (heavy duty) MF = Male Inverted Flare K = 4 Male (heavy duty) MJ = Male JIC F = Flange Code 6 MP = Male Pipe FJ = Female JIC Swivel MR = Male ORS FL = Flange Code 6 PS = Pipe Swivel Connecting end configuration code If nipple has a straight configuration, then this position collapses. = 45 = 67 / B = 90, standard or short drop F = 30 C = 90, long drop G = 60 = / size* Material esignation C = stainless steel, if fitting is zinc plated carbon steel (standard), this position collapses. *When ordering sizes 3, 4, 5, 6 and 8 the part number requires only single digits Crimp fittings Fittings are ordered as complete assemblies or as component parts. Complete fitting number: Basic part number Pipe or port size Mating hose size Material designation suffix Crimp socket Complete socket number: Basic part number Socket hose size Material designation suffix Crimp nipple Complete nipple number: Basic part number Socket or port size Socket hose size Material designation suffix Reusable fittings Fittings are ordered as complete assemblies. Complete number: Basic part number Pipe or port size (in 6ths of an inch) Mating hose size Material designation suffix FJ S FC77 0 S FC S S 7

5 SOCKT T Crimp Socket ata Socket to hose correct combinations Use of the correct eroquip socket with a given eroquip hose is essential for proper assembly and performance. Virtually all eroquip hose sockets are marked with the socket part number and dash size. Using this number, from the following table, the correct hose or hoses may be found and dash sizes matched, to assure the correct combination. Global Non-Skive Socket Identification (TTC, TTC-0, and TTC Sockets) Thru the cover fitting sockets for one wire and two wire braid hose in all sizes except 0 have one and two rings plus a scribe mark and TTC (size) stamped on the socket. In the 0 size there are two sockets, one for one wire braid hose with one ring on the socket and one for two wire braid hose with two rings on the socket plus a scribe mark. Both 0 sockets have TTC 0 stamped on the sockets. Thru the cover fitting sockets for four spiral hose have four rings plus a scribe mark and TTC (size) stamped on the socket. TTC- TTC-0 TTC- TTC-0 Global Over the Cover Identification (OTC Sockets) Over the cover Global fitting sockets have G(size) and a scribe mark stamped on the socket. G SCRIB MRK: For TTC and TTC Fittings, the Scribe Mark identifies Crimp Length Indicator for assembly; See Bulletin J55 for details. Global Skive Socket Identification S sockets are stamped S(size) for one wire braid hose and SB sockets are stamped SB(size) for two wire braid hose. S sockets have one ring and SB sockets have two rings grooved around the circumference of each socket. S SB Global Identification Marking Global hose fittings are identified with the eroquip trademark and the hose size. In addition, Global sockets are identified with the following: Identification Fitting /Socket Marking Style escription ring skive One wire braid S(size) hose and skive type socket rings skive Two wire braid SB(size) hose and skive type socket rings Thru the One wire and ring cover two wire braid scribe mark hose and TTC TTC (size) socket 4 rings Spiral thru Four spiral scribe mark the cover wire hose and TTC (size) TTC socket ring Thru the One wire braid scribe mark cover 0 size hose TTC 0 ( 0 size only) and TTC socket rings Thru the Two wire braid scribe mark cover 0 size hose TTC 0 ( 0 size only) and TTC socket scribe mark Over the Textile braid G (size) cover and suction hoses and OTC socket (S 00R3, R4 and R6 hose styles) Socket eroquip base part hose base ash Crimp sockets number part no. sizes to 3 FC94 04 to 0 FC 04 to 6 FC30 04 to 0 FC37 03 S FC FC50 04 to 0 FC to 08 FC90 00 FC90 00 G94 04 to 0 G to 6 G68 04 to to to to 3 FC95 04 to 3 FC 04 to 3 FC37 04 to 6 FC to 6 SB FC to FC to FC FC639 0 to 6 FC to 0 FC90 0 to 06 FC90 0 to 06 G0 04 to 0 G95 04 to 3 G683 04, 06 G78 04 to 0 G to 3 FC36, 6 FC736 FC40 FC33, 6 G493 FC34, 6 FC36 06 to 0 FC347 G493 FC736 FC to 3 FC347 FC to 3 FC to 3 FC60 FC606 6, 0 FC36 6 to 3 FC736 6 to 0 FC540 FC54 08, 6 to 3 FC73 6 FC33 6 to 3 FC34 6 FC35 6 FC54 FC73, 0 to 3 FC77 FC33 FC34 FC FC303 FC , 06, 0 FC3443 FC FC86 05, 06, 0 FC465 05, 06, , 04, 08,, 6 FC3596 FC86 04, 08, FC465 03, 04, 06 FC FC740 FC to 7

6 SOCKT T Reusable Socket ata Socket to hose correction combinations Use of the correct eroquip socket with a given eroquip hose is essential for proper assembly and performance. Virtually all eroquip hose sockets are marked with the Socket eroquip base part hose base ash Reusable sockets number part number sizes 807, 06 FC86, all FC all , 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 30, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC , 554, 555, to 6 to 48 all socket part number and dash size. Using this number, from the table below, the correct hose or hoses may be found and dash sizes matched, to assure the correct combination. Socket eroquip base part hose base ash Reusable sockets number part number sizes FC36 08, 6 FC95 6 FC34 08 G493 8, 6 FC383 FC36 0, 4 G493 FC54 FC, all G663 FC64 FC30 all FC50 04 to , 53 all FC65 FC, all G FC36 6, G493 FC94 FC37, FC373 all FC95 4 to 0 to 3 4 to 0 to 3 4 to 0 to 3 4 to 0 to 3 73

7 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Male Pipe (MP) SMP3 / S4MP3 / SMP4 GMP4 MP4 / S4MP4 G4MP4 4MP4 / S6MP4 G6MP4 6MP4 3 / S4MP6 G4MP6 4MP6 B4MP6 / S6MP6 G6MP6 6MP6 B6MP6 3 / S8MP6 G8MP6 8MP6 B8MP6 / S4MP8 G4MP8 4MP8 B4MP8 / S6MP8 G6MP8 6MP8 B6MP8 3 / S8MP8 G8MP8 8MP8 B8MP8 / SMP8 GMP8 MP8 BMP8 3 / S6MP0 6MP0 3 / S8MP0 G8MP0 8MP0 B8MP0 / SMP0 GMP0 MP0 BMP0 3 / S8MP G8MP 8MP B8MP / SMP GMP MP BMP 3 / S6MP G6MP 6MP B6MP - / SMP6 GMP6 MP6 BMP6 3 / S6MP6 G6MP6 6MP6 B6MP6 - / S0MP6 G0MP6 0MP6 B0MP6 /4- / S6MP0 G6MP0 B6MP0 - / R6MP0* - / V6MP0** - / S0MP0 G0MP0 B0MP0 /4- / R0MP0* /4- / V0MP0** /4- / S4MP4 G4MP4 4MP4 B4MP4 /- / S3MP3 G3MP3 3MP3 - / B3MP3 - / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. lso available in stainless steel, add suffix C to part number, i.e., 4MP4C. 74

8 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female Pipe Swivel (PF) S4PF4 G4PF4 4PF4 / S6PF6 G6PF6 6PF6 3 / S8PF8 G8PF8 8PF8 / SPF GPF PF 3 / Male Pipe Swivel (PS) SPS3 / S4PS4 G4PS4 4PS4 / S6PS6 G6PS6 6PS6 3 / S8PS6 G8PS6 8PS6 / S6PS8 G6PS8 6PS8 3 / S8PS8 G8PS8 8PS8 / SPS GPS PS 3 / S6PS6 G6PS6 6PS6 - /

9 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel (FJ) S3FJ3 3 / S4FJ3 7 / S3FJ4 G3FJ4 3FJ4 3 / S4FJ4 G4FJ4 4FJ4 7 / S5FJ4 G5FJ4 5FJ4 / S6FJ4 G6FJ4 6FJ4 9 / S5FJ5 G5FJ5 5FJ5 / S6FJ5 G6FJ5 6FJ5 9 / S4FJ6 G4FJ6 4FJ6 B4FJ6 7 / S5FJ6 G5FJ6 5FJ6 / S6FJ6 G6FJ6 6FJ6 B6FJ6 9 / S8FJ6 G8FJ6 8FJ6 B8FJ6 3 / S0FJ6 7 / S8FJ8 G8FJ8 8FJ8 B8FJ8 3 / S0FJ8 G0FJ8 0FJ8 B0FJ8 7 / SFJ8 GFJ8 FJ8 BFJ8 / S6FJ8 G6FJ8 6FJ8 B6FJ8 5 / S8FJ0 8FJ0 3 / S0FJ0 G0FJ0 0FJ0 B0FJ0 7 / SFJ0 GFJ0 FJ0 BFJ0 / S0FJ G0FJ 0FJ B0FJ 7 / SFJ GFJ FJ BFJ / S4FJ G4FJ 4FJ B4FJ 3 / S6FJ G6FJ 6FJ B6FJ 5 / SFJ6 GFJ6 FJ6 BFJ6 / S6FJ6 G6FJ6 6FJ6 B6FJ6 5 / S0FJ6 G0FJ6 0FJ6 B0FJ6 5 / S6FJ0 G6FJ0 B6FJ0 5 / R6FJ0* 5 / V6FJ0** 5 / S0FJ0 G0FJ0 B0FJ0 5 / R0FJ0* 5 / V0FJ0** 5 / S4FJ0 B4FJ0 7 / S4FJ4 G4FJ4 4FJ4 B4FJ4 7 / S4FJ3 G4FJ3 4FJ3 7 / S3FJ3 G3FJ3 3FJ3 / B3FJ3 / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. lso available in stainless steel, add suffix C to part number, i.e., 4FJ4C. 76

10 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel 45 lbow (FJ) S4FJ4 G4FJ4 4FJ4 7 / S5FJ4 G5FJ4 5FJ4 / S6FJ4 G6FJ4 6FJ4 9 / S6FJ6 G6FJ6 6FJ6 9 / B6FJ6 9 / S8FJ6 G8FJ6 8FJ6 3 / B8FJ6 3 / S8FJ8 G8FJ8 8FJ8 3 / B8FJ8 3 / S0FJ8 G0FJ8 0FJ8 7 / B0FJ8 7 / S0FJ0 G0FJ0 0FJ0 7 / SFJ0 GFJ0 FJ0 / BFJ0 / SFJ GFJ FJ / BFJ / S0FJ6 G0FJ6 0FJ6 5 / S6FJ6 G6FJ6 6FJ6 5 / B6FJ6 5 / S0FJ0 G0FJ0 5 / B0FJ0 5 / R0FJ0* 5 / V0FJ0** 5 / B4FJ4 7 / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. Swivel nuts are universal for both S 37 and S 45 connections. 77

11 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel 90 lbow (FJB) S4FJB3 7 / S4FJB4 G4FJB4 4FJB4 7 / S5FJB4 G5FJB4 5FJB4 / S6FJB4 G6FJB4 6FJB4 9 / S5FJB5 / S6FJB6 G6FJB6 6FJB6 9 / B6FJB6 9 / S8FJB6 G8FJB6 8FJB6 3 / B8FJB6 3 / S6FJB8 G6JFB8 6FJB8 9 / S8FJB8 G8FJB8 8FJB8 3 / B8FJB8 3 / S0FJB8 G0FJB8 0FJB8 7 / B0FJB8 7 / S0FJB0 G0FJB0 0FJB0 B0FJB0 7 / SFJB8 / SFJB0 GFJB0 FJB0 / BFJB0 / SFJB GFJB FJB / BFJB / S6FJB G6FJB 6FJB 5 / B6FJB 5 / S6FJB6 G6FJB6 6FJB6 5 / B6FJB6 5 / S6FJB0 5 / S0FJB0 G0FJB0 5 / B0FJB0 5 / R0FJB0* 5 / V0FJB0** 5 / B4FJB4 7 / S4FJB4 4FJB4 7 / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. Swivel nuts are universal for both S 37 and S 45 connections. 78

12 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female JIC/S 37 Swivel 90 Long rop lbow (FJC) S4FJC4 G4FJC4 4FJC4 7 / S5FJC4 G5FJC4 5FJC4 / S6FJC4 9 / S6FJC6 G6FJC6 6FJC6 9 / B6FJC6 9 / S8FJC6 8FJC6 3 / S8FJC8 G8FJC8 8FJC8 3 / B8FJC8 3 / S0FJC8 G0FJC8 0FJC8 7 / B0FJC8 7 / S0FJC0 0FJC0 7 / SFJC GFJC FJC / BFJC / S6FJC6 G6FJC6 6FJC6 5 / B6FJC6 5 / S0FJC0 G0FJC0 5 / B0FJC0 5 / R0FJC0* 5 / V0FJC0** 5 / ML JIC/S 37 (MJ) S4MJ4 G4MJ4 4MJ4 7 / S5MJ4 G5MJ4 5MJ4 / S6MJ4 G6MJ4 6MJ4 9 / S5MJ5 / S6MJ5 G6MJ5 6MJ5 9 / S6MJ6 G6MJ6 6MJ6 B6MJ6 9 / S8MJ6 G8MJ6 8MJ6 B8MJ6 3 / S8MJ8 G8MJ8 8MJ8 B8MJ8 3 / S0MJ8 G0MJ8 0MJ8 B0MJ8 7 / SMJ8 GMJ8 MJ8 BMJ8 / S0MJ0 G0MJ0 0MJ0 B0MJ0 7 / SMJ0 GMJ0 MJ0 BMJ0 / S0MJ G0MJ 0MJ B0MJ 7 / SMJ GMJ MJ BMJ / S4MJ G4MJ 4MJ B4MJ 3 / S6MJ G6MJ 6MJ B6MJ 5 / S6MJ6 G6MJ6 6MJ6 B6MJ6 5 / S0MJ0 G0MJ0 B0MJ0 5 / R0MJ0* 5 / V0MJ0** 5 / S4MJ4 G4MJ4 4MJ4 B4MJ4 7 / S3MJ3 G3MJ3 3MJ3 / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. Swivel nuts are universal for both S 37 and S 45 connections. 79

13 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female S 45 Swivel (FS) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S4FS4 G4FS4 4FS4 7 / S5FS4 G5FS4 5FS4 / S4FS6 G4FS6 4FS6 B4FS6 7 / S6FS6 G6FS6 6FS6 B6FS6 5 / S8FS6 G8FS6 8FS6 B8FS6 3 / S8FS8 G8FS8 8FS8 B8FS8 3 / S0FS8 G0FS8 0FS8 B0FS8 7 / S0FS0 G0FS0 7 / SFS0 FS0 BFS0 / SFS GFS FS BFS / Male Boss O-Ring (MB), see page 78 for O-Rings S4MB4 G4MB4 4MB4 7 / S5MB4 G5MB4 5MB4 / S6MB4 G6MB4 6MB4 9 / S6MB6 G6MB6 6MB6 B6MB6 9 / S8MB6 G8MB6 8MB6 B8MB6 3 / S8MB8 G8MB8 8MB8 B8MB8 3 / S0MB8 G0MB8 0MB8 B0MB8 7 / SMB8 GMB8 MB8 BMB8 / S0MB0 G0MB0 0MB0 B0MB0 7 / SMB0 GMB0 MB0 BMB0 / SMB GMB MB BMB / S6MB G6MB 6MB B6MB 5 / S6MB6 G6MB6 6MB6 B6MB6 5 / S0MB0 G0MB0 BMB0 5 / R0MB0* 5 / V0MB0** 5 / S4MB4 G4MB4 4MB4 B4MB4 7 / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 80

14 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Female ORS Swivel (FR), see page 78 for O-Rings Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S4FR4 G4FR4 4FR4 9 / S6FR4 G6FR4 6FR4 / S4FR6 G4FR6 4FR6 B4FR6 9 / S6FR6 G6FR6 6FR6 B6FR6 / S8FR6 G8FR6 8FR6 B8FR6 3 / S6FR8 G6FR8 6FR8 B6FR8 / S8FR8 G8FR8 8FR8 B8FR8 3 / S0FR8 G0FR8 0FR8 B0FR SFR8 GFR8 FR8 BFR8 3 / S8FR0 G8FR0 8FR0 B8FR0 3 / S0FR0 G0FR0 0FR0 B0FR SFR0 GFR0 FR0 BFR0 3 / S0FR G0FR 0FR B0FR SFR GFR FR BFR 3 / S6FR G6FR 6FR B6FR 7 / SFR6 GFR6 FR6 BFR6 3 / S6FR6 G6FR6 6FR6 B6FR6 7 / S0FR6 G0FR6 0FR6 B0FR6 / S0FR0 G0FR0 B0FR0 / R0FR0* / V0FR0** / S4FR0 G4FR R4FR0* V4FR0** B4FR S4FR4 G4FR4 4FR B4FR *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 8

15 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Ø Female ORS Swivel 45 lbow (FR), see page 78 for O-Rings S4FR4 G4FR4 4FR4 9 / S6FR4 G6FR4 6FR4 / S4FR6 G4FR6 4FR6 9 / S6FR6 G6FR6 6FR6 B6FR6 / S8FR6 G8FR6 8FR6 B8FR6 3 / S6FR8 6FR8 / S8FR8 G8FR8 8FR8 B8FR8 3 / S0FR8 G0FR8 0FR8 B0FR SFR8 GFR8 FR8 3 / S0FR0 G0FR0 0FR0 B0FR SFR0 FR0 3 / SFR GFR FR BFR 3 / S6FR G6FR 6FR 7 / S6FR6 G6FR6 6FR6 B6FR6 7 / S0FR0 G0FR0 B0FR0 / R0FR0* / V0FR0** / S4FR0 G4FR R4FR0* V4FR0** S4FR4 G4FR4 4FR *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 8

16 Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 GLOBL CRIMP Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread Size Ø Female ORS Swivel 90 Short rop lbow (FRB), see page 78 for O-Rings S4FRB4 G4FRB4 4FRB4 9 / S6FRB4 G6FRB4 6FRB4 / S8FRB4 3 / S4FRB6 G4FRB6 4FRB6 9 / S6FRB6 G6FRB6 6FRB6 B6FRB6 / S8FRB6 G8FRB6 8FRB6 B8FRB6 3 / S6FRB8 G6FRB8 6FRB8 B6FRB8 / S8FRB8 G8FRB8 8FRB8 B8FRB8 3 / S0FRB8 G0FRB8 0FRB8 B0FRB SFRB8 GFRB8 FRB8 BFRB8 3 / S0FRB0 G0FRB0 0FRB0 B0FRB SFRB0 GFRB0 FRB0 BFRB0 3 / S0FRB G0FRB 0FRB SFRB GFRB FRB BFRB 3 / S6FRB G6FRB 6FRB B6FRB 7 / S6FRB6 G6FRB6 6FRB6 B6FRB6 7 / S0FRB6 G0FRB6 0FRB6 / S0FRB0 G0FRB0 B0FRB0 / R0FRB0* / V0FRB0** / S4FRB4 G4FRB4 4FRB Female ORS Swivel 90 Long rop lbow (FRC), see page 78 for O-Rings S4FRC4 G4FRC4 4FRC4 9 / S6FRC4 G6FRC4 6FRC4 / S8FRC4 G8FRC4 8FRC4 3 / S6FRC6 G6FRC6 6FRC6 B6FRC6 / S8FRC6 G8FRC6 8FRC6 B8FRC6 3 / S8FRC8 G8FRC8 8FRC8 B8FRC8 3 / S0FRC8 G0FRC8 0FRC S0FRC0 G0FRC0 0FRC SFRC GFRC FRC BFRC 3 / S6FRC 6FRC 7 / S6FRC6 G6FRC6 6FRC6 B6FRC6 7 / S0FRC0 G0FRC0 B0FRC0 / R0FRC0* / V0FRC0** / S4FRC4 G4FRC4 4FRC *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 83

17 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Part Number Part Number Part Number Part Number Thread Size Male ORS (MR), see page 78 for O-Rings S4MR4 G4MR4 4MR4 9 / S6MR6 G6MR6 6MR6 B6MR6 / S8MR6 G8MR6 8MR6 B8MR6 3 / S8MR8 G8MR8 8MR8 B8MR8 3 / SMR GMR MR BMR 3 / S6MR G6MR 6MR B6MR 7 / S6MR6 7 / Male Stāplok (SL), see page 78 for O-Rings and Staples S4SL4 G4SL4 4SL S6SL6 G6SL6 6SL6 B6SL S8SL6 G8SL6 8SL6 B8SL S8SL8 G8SL8 8SL8 B8SL SSL GSL SL BSL S6SL6 G6SL6 6SL6 B6SL S0SL0 G0SL0 B0SL P0SL0* T0SL0** S3SL3 G3SL3 3SL Male S Inverted Flare Swivel (MF) S4MF3 7 / S3MF4 3MF4 3 / S4MF4 G4MF4 4MF4 7 / S5MF4 5MF4 / S5MF6 G5MF6 5MF6 / S4MF6 4MF6 7 / S6MF6 G6MF6 6MF6 5 / S8MF8 G8MF8 8MF8 3 / Male S Inverted Flare Swivel 45 lbow (MF) S4MF4 G4MF4 4MF4 7 / S4MF6 4MF6 7 / S5MF6 G5MF6 5MF6 / S6MF6 G6MF6 6MF6 5 / S8MF8 G8MF8 8MF8 3 / *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 84

18 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Thread Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K. Size Male S Inverted Flare Swivel 90 lbow (MFB) S4MFB4 G4MFB4 4MFB4 7 / S5MFB4 5MFB4 / S4MFB6 4MFB6 7 / S5MFB6 G5MFB6 5MFB6 / S6MFB6 G6MFB6 6MFB6 5 / S8MFB8 G8MFB8 8MFB8 3 / S Code 6 Split Flange (FL) For flanges, split flange halves, kits and O-rings, see page S8FL8 G8FL8 8FL8 B8FL SFL8 GFL8 FL8 BFL SFL0 GFL0 FL0 BFL SFL GFL FL BFL S6FL G6FL 6FL B6FL S0FL G0FL 0FL B0FL SFL6 FL S6FL6 G6FL6 6FL6 B6FL S0FL6 G0FL6 0FL6 B0FL S4FL6 G4FL6 4FL6 B4FL S6FL0 G6FL0 B6FL P6FL0* T6FL0** S0FL0 G0FL0 B0FL P0FL0* T0FL0** S4FL0 G4FL0 B4FL P4FL0* T4FL0** S3FL0 G3FL0 B3FL P3FL0* T3FL0** S0FL4 G0FL4 0FL S4FL4 G4FL4 4FL4 B4FL S3FL4 G3FL4 3FL4 B3FL S4FL3 G4FL3 4FL B4FL S3FL3 G3FL3 3FL B3FL S40FL3 G40FL3 40FL B40FL *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 85

19 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K Size S Code 6 Split Flange 45 lbow (FL) For flanges, split flange halves, kits and O-rings, see page S8FL8 G8FL8 8FL B8FL SFL8 GFL8 FL BFL SFL0 GFL0 FL BFL SFL GFL FL BFL S6FL G6FL 6FL B6FL B0FL SFL6 FL S6FL6 G6FL6 6FL6 B6FL S0FL6 G0FL6 0FL B0FL S6FL0 G6FL0 B6FL P6FL0* T6FL0** S0FL0 G0FL B0FL P0FL0* T0FL0** S4FL0 G4FL0 B4FL P4FL0* T4FL0** S0FL4 G0FL4 0FL S4FL4 G4FL4 4FL B4FL S3FL4 3FL B3FL S4FL3 G4FL3 4FL S3FL3 G3FL3 3FL B3FL S40FL3 G40FL3 40FL *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 86

20 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K Size S Code 6 Split Flange 90 lbow (FLB) For flanges, split flange halves, kits and O-rings, see page S8FLB8 G8FLB8 8FLB B8FLB SFLB8 GFLB8 FLB BFLB SFLB0 GFLB0 FLB BFLB SFLB GFLB FLB BFLB S6FLB G6FLB 6FLB B6FLB S0FLB 0FLB B0FLB SFLB6 GFLB6 FLB S6FLB6 G6FLB6 6FLB B6FLB S0FLB6 G0FLB6 0FLB B0FLB S4FLB6 G4FLB6 4FLB6 B4FLB S6FLB0 G6FLB0 B6FLB P6FLB0* T6FLB0** S0FLB0 G0FLB0 B0FLB P0FLB0* T0FLB0** S4FLB0 G4FLB0 B4FLB P4FLB0* T4FLB0** S3FLB0 G3FLB S6FLB4 G6FLB4 6FLB B6FLB S0FLB4 G0FLB4 0FLB S4FLB4 G4FLB4 4FLB B4FLB S3FLB4 G3FLB4 3FLB B3FLB S4FLB3 4FLB B4FLB S3FLB3 G3FLB3 3FLB B3FLB S40FLB3 G40FLB3 40FLB B40FLB S Code 6 Split Flange / lbow (FL) For flanges, split flange halves, kits and O-Rings, see page B8FL BFL BFL B6FL S6FL6 6FL6 B6FL S0FL6 0FL6 B0FL S0FL0 B0FL P0FL0* T0FL0** B4FL B4FL B3FL *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 87

21 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. K Size S Code 6 Split Flange 67 / lbow (FL) For flanges, split flange halves, kits and O-rings, see page B8FL BFL B6FL B6FL B0FL P0FL0* T0FL0** S0FL0 B0FL B4FL B3FL S Code 6 Split Flange 30 lbow (FLF) For flanges, split flange halves, kits and O-rings, see page B8FLF BFLF B6FLF B6FLF B0FLF B0FLF B4FLF B4FLF B3FLF B40FLF S Code 6 Split Flange 60 lbow (FLG) For flanges, split flange halves, kits and O-rings, see page B8FLG BFLG B6FLG S6FLG6 G6FLG6 6FLG6 B6FLG S0FLG6 B0FLG B0FLG B4FLG S4FLG4 G4FLG4 4FLG4 B4FLG B3FLG *Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 88

22 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. Kφ Size φ S Code 6 Split Flange (F) For flanges, split flange halves, kits and O-Rings, see page Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. B8F BF BF BF B6F B6F B0F S0F0 B0F B4F B4F B3F S Code 6 Split Flange / lbow (F) For flanges, split flange halves, kits and O-Rings, see page B3F S Code 6 Split Flange 30 lbow (FF) For flanges, split flange halves, kits and O-Rings, see page B3FF S Code 6 Split Flange 45 lbow (F) For flanges, split flange halves, kits and O-Rings, see page BF B6F B0F B0F B4F B3F

23 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. Nipple OTC TTC Fitting TTC Fitting Flange ead Part Number Part Number Part Number Part Number ia. Kφ Size φ S Code 6 Split Flange 60 lbow (FG) For flanges, split flange halves, kits and O-Rings, see page B6FG B0FG B3FG S Code 6 Split Flange 67 / lbow (F) For flanges, split flange halves, kits and O-Rings, see page B3F S Code 6 Split Flange 90 lbow (FB) For flanges, split flange halves, kits and O-Rings, see page B8FB BFB B6FB B6FB B0FB B0FB B4FB B3FB

24 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread T Size φ JIS/BSPP Female Swivel (BF)*** Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S4BF4 G4BF4 4BF4 G / S6BF6 G6BF6 6BF6 B6BF6 G 3 / S8BF6 G8BF6 8BF6 G / S8BF8 G8BF8 8BF8 B8BF8 G / S0BF0 G0BF0 0BF0 G 5 / SBF GBF BF BBF G 3 / S6BF6 G6BF6 6BF6 B6BF6 G S0BF0 G0BF0 T0BF0** B0BF0 G / S4BF4 G4BF4 B4BF4 G / S3BF3 G3BF3 G JIS/BSPP Female Swivel (JM)*** S4JM4 G4JM4 4JM4 G / S6JM6 G6JM6 6JM6 G 3 / S8JM8 G8JM8 8JM8 B8JM8 G / SJM GJM JM BJM G 3 / S6JM6 G6JM6 6JM6 B6JM6 G S0JM0 G0JM0 P0JM0* B0JM0 G / T0JM0** G / *Uses wire braid hose socket. FT30, FT330, and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330, and FT08 assembly machines require a one-piece fitting. ***The JIS parallel thread and the BSPP connection are interchangeable. 9

25 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread T Size φ JIS/BSPP Female Swivel, 45 lbow (BF)*** Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. ll dimensions in millimeters. S4BF4 G4BF4 4BF4 G / S6BF6 G6BF6 6BF6 G 3 / S8BF8 G8BF8 8BF8 B8BF8 G / S0BF0 G0BF0 0BF0 G 5 / SBF GBF BF BBF G 3 / S6BF6 G6BF6 6BF6 B6BF6 G S0BF0 G0BF0 T0BF0** B0BF0 G / JIS/BSPP Female Swivel. 90 lbow (BFB)*** S4BFB4 G4BFB4 4BFB4 G / S6BFB6 G6BFB6 6BFB6 G 3 / S8BFB6 G8BFB6 8BFB6 G / S8BFB8 G8BFB8 8BFB8 B8BFB8 G / S0BFB0 G0BFB0 0BFB0 G 5 / SBFB GBFB BFB BBFB G 3 / S6BFB6 G6BFB6 6BFB6 B6BFB6 G S0BFB0 G0BFB0 T0BFB0** B0BFB0 G / ** Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. ***The JIS parallel thread and the BSPP connection are interchangeable. 9

26 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Part Number Part Number Part Number Part Number Thread T Size φ BSP Male Tapered, BSPT (BT) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. ll dimensions in millimeters. S4BT4 G4BT4 4BT4 R / S6BT6 G6BT6 6BT6 B6BT6 R 3 / S8BT8 G8BT8 8BT8 B8BT8 R / SBT GBT BT BBT R 3 / S6BT6 G6BT6 6BT6 B6BT6 R S0BT0 G0BT0 T0BT0** B0BT0 R / B4BT4 R / BSP Male Parallel (BP) S4BP4 G4BP4 4BP4 G / S6BP6 G6BP6 6BP6 G 3 / S8BP6 G8BP6 8BP6 G / S8BP8 G8BP8 8BP8 G / SBP GBP BP G 3 / S6BP6 G6BP6 6BP6 G ** Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 93

27 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Tube Part Number Part Number Part Number Part Number Thread T O.. Size φ KO Female Swivel, Light uty (L) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. ll dimensions in millimeters. S5L4 G5L4 5L4 M x S6L4 G6L4 6L4 M4 x S8L6 G8L6 8L6 B8L6 M6 x S0L6 G0L6 0L6 B0L6 M8 x SL8 GL8 L8 BL8 M x S6L0 G6L0 6L0 B6L0 M6 x S0L G0L 0L B0L M30 x S5L6 G5L6 5L6 B5L6 M36 x S3L0 G3L0 T3L0** B3L0 M45 x S40L4 G40L4 40L4 M5 x KO Female Swivel, Light uty, 45 lbow (L) S6L4 G6L4 6L4 M4 x S8L6 G8L6 8L6 M6 x S0L6 G0L6 0L6 M8 x SL8 GL8 L8 M x S6L0 G6L0 6L0 M6 x S0L G0L 0L M30 x S5L6 G5L6 5L6 M36 x T3L0** M45 x ** Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 94

28 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Tube Part Number Part Number Part Number Part Number Thread T O.. Size φ KO Female Swivel, Light uty, 90 lbow (LB) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. ll dimensions in millimeters. S5LB4 G5LB4 5LB4 M x S5LB4 G6LB4 6LB4 M4 x S8LB6 G8LB6 8LB6 B8LB6 M6 x S0LB6 G0LB6 0LB6 M8 x SLB8 GLB8 LB8 BLB8 M x S6LB0 G6LB0 6LB0 M6 x S0LB G0LB 0LB B0LB M30 x S5LB6 G5LB6 5LB6 M36 x T3LB0** M45 x Male, Light uty (K) S5K4 G5K4 5K4 M x S6K4 G6K4 6K4 M4 x S8K6 G8K6 8K6 M6 x S0K6 G0K6 0K6 M8 x SK8 GK8 K8 M x S6K0 G6K0 6K0 M6 x S0K G0K 0K M30 x S5K6 G5K6 5K6 M36 x S3K0 G3K0 T3K0** M45 x ** Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 95

29 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Thread Tube Part Number Part Number Part Number Part Number T O. Size φ KO Female Swivel, eavy uty (S) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. ll dimensions in millimeters. S5S4 G5S4 5S4 M6 x S6S4 G6S4 6S4 M8 x S8S6 G8S6 8S6 B8S6 M0 x S0S6 G0S6 0S6 B0S6 M x SS8 GS8 S8 BS8 M4 x S6S0 G6S0 6S0 B6S0 M30 x S0S G0S 0S B0S M36 x S5S6 G5S6 5S6 B5S6 M4 x B3S0 M5 x KO Female Swivel, eavy uty, 45 lbow (S) S6S4 G6S4 6S4 M8 x S8S6 G8S6 8S6 B8S6 M0 x S0S6 G0S6 0S6 M x SS8 GS8 S8 BS8 M4 x S6S0 G6S0 6S0 B6S0 M30 x S0S G0S 0S B0S M36 x S5S6 G5S6 5S6 B5S6 M4 x

30 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC TTC Thread Tube Part Number Part Number Part Number Part Number T O. Size φ KO Female Swivel, eavy uty, 90 lbow (SB) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S6SB4 G6SB4 6SB4 M8 x S8SB6 G8SB6 8SB6 B8SB6 M0 x S0SB6 G0SB6 0SB6 B0SB6 M x SSB8 GSB8 SB8 BSB8 M4 x S6SB0 G6SB0 6SB0 B6SB0 M30 x S0SB G0SB 0SB B0SB M36 x S5SB6 G5SB6 5SB6 B5SB6 M4 x Male, eavy uty (K) S5K4 G5K4 5K4 M6 x S6K4 G6K4 6K4 M8 x S8K6 G8K6 8K6 B8K6 M0 x S0K6 G0K6 0K6 B0K6 M x SK8 GK8 K8 BK8 M4 x S6K0 G6K0 6K0 B6K0 M30 x S0K G0K 0K B0K M36 x S5K6 G5K6 5K6 B5K6 M4 x

31 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC Fitting TTC Fitting Part Number Part Number Part Number Part Number Thread Size φ JIS Female Swivel (JF) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. ll dimensions in millimeters. S4JF4 G4JF4 4JF4 G / S6JF6 G6JF6 6JF6 B6JF6 G 3 / S8JF8 G8JF8 8JF8 B8JF8 G / SJF GJF JF BJF G 3 / S6JF6 G6JF6 6JF6 B6JF6 G S0JF0 G0JF0 P0JF0* B0JF0 G / T0JF0** G / S4JF4 G4JF4 4JF4 B4JF4 G / S3JF3 G3JF3 3JF3 B3JF3 G Komatsu Female Swivel (KF) S4KF4 G4KF4 4KF4 M4 x S6KF6 G6KF6 6KF6 M8 x S8KF8 G8KF8 8KF8 M x S0KF0 G0KF0 0KF0 M4 x S0KF G0KF 0KF M4 x SKF GKF KF BKF M30 x S6KF6 G6KF6 6KF6 B6KF6 M33 x S0KF0 G0KF0 P0KF0* B0KF0 M36 x T0KF0** M36 x S4KF4 G4KF4 4KF4 M4 x *Uses wire braid hose socket. FT30, FT330, and FT08 assembly machines require a one-piece fitting. **Uses wire braid hose socket. FT30, FT330 and FT08 assembly machines require a one-piece fitting. 98

32 GLOBL CRIMP Global Nipples for use with : Clamp: 66 ( thru 0), FC38 ( thru 0), FC69 ( thru 0). Socket S: 68, FC94, FC, FC30, FC37-03, FC373-03, FC50, FC639 ( 4 thru 8), G94, G663, G68. Socket SB: 59, 766, 78, FC95, FC, FC37 ( 4 thru 6), FC373 ( 4 thru 6), FC466, FC498, FC579, FC639 ( 0 thru 6), FC735 ( 4 thru 0), G0 ( 4 thru 0), G95, G683 (-4,-6), G78 ( 04 thru 0), G793. Global OTC Fittings for use with : 583, 66, FC38, FC466, FC498, FC69, FC699 Nipple OTC TTC Fitting TTC Fitting Flange Part Number Part Number Part Number Part Number ia. Size φ Komatsu Split Flange (KS) Global TTC Fittings for use with : 66( thru 3), FC, FC, FC30, FC38 ( thru 3), FC44, FC50, FC579, FC6, FC69, FC639 ( 4 thru ), FC693, FC735, G0, G94, G95, G663, G68 6, G683, G78, G793. Global TTC Fittings for use with : 66, FC36, FC38, FC66, FC636, FC659, FC736, G493. S0KS0 G0KS0 0KS0 B0KS ll dimensions in millimeters. Komatsu Split Flange 45 lbow (KS) S0KS0 G0KS0 0KS0 B0KS Komatsu Split Flange 90 lbow (KSB) S0KSB0 G0KSB0 0KSB0 B0KSB

33 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Straight split flange Code 6 (S J58) F F F Z6F F F Z0F Z0F F Z4F F Z4F F Z3F F Z3F split flange - Code 6 (S J58) F F F Z6F F F Z0F Z0F F Z4F F Z4F F Z3F F Z3F split flange - Code 6 (S J58) FB FB FB Z6FB FB FB Z0FB Z0FB FB Z4FB FB Z4FB FB Z3FB FB Z3FB NOT: For flanges, split flange halves, kits and o-rings, see pages K L K Code 6 Code 6 Code 6 Straight Split Flange 45 lbow Split Flange 90 lbow Split Flange L K L 00

34 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73 (, 6), G506 Fittings for use on 4 wire construction Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Straight split flange - Code 6 (S J58) FL FL FL FL FL FL FL FL FL split flange - Code 6 (S J58) FL FL FL FL FL FL FL FL FL split flange - Code 6 (S J58) FLB FLB FLB FLB FLB FLB FLB FLB FLB NOT: For flanges, split flange halves, kits and o-rings, see pages K L K Code 6 Code 6 Code 6 Straight Split Flange 45 lbow Split Flange 90 lbow Split Flange L K L 0

35 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction Compatible only with -rings found on page 78. K L Cat Flange Cat Flange Cat Flange Straight 45 lbow 90 lbow Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Caterpillar - Straight split flange CT CT CT Z6CT CT CT Z0CT Z0CT Z4CT Z4CT Z3CT Z3CT Caterpillar - 45 split flange CT CT CT Z6CT CT CT Z0CT Z0CT Z4CT Z4CT Z3CT Z3CT K L K L Caterpillar - 90 split flange CTB CTB CTB Z6CTB CTB CTB Z0CTB Z0CTB Z4CTB Z4CTB Z3CTB Z3CTB

36 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction Compatible only with -rings found on page 78. Cat Flange Cat Flange Cat Flange Cat Flange.5 lbow 30 lbow 60 lbow 67.5 lbow Flange Insertion Fitting ead Length Part Number ia. K Size L inch mm inch mm inch mm inch mm inch mm Caterpillar -.5 split flange CT CT Z6CT CT Z0CT Z4CT Z4CT Caterpillar - 30 split flange CTF CTF Z6CTF CTF Z0CTF Z4CTF Z4CTF Z3CTF Z3CTF Caterpillar - 60 split flange CTG CTG Z6CTG CTG Z0CTG Z4CTG Z4CTG Z3CTG Z3CTG Caterpillar split flange CT CT Z6CT CT Z0CT Z4CT

37 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73 (, 6), G506 Fittings for use on 4 wire construction BSPP Swivel BSPP Swivel BSPP Swivel Straight 45 lbow 90 lbow Insertion Fitting Length Part Number Thread Size L inch mm inch mm inch mm inch mm BSP/JIS Female Swivel (BF) BF G 3/ BF G BF6 G BF6 G / BF0 G / BF4 G / BF3 G BSP/JIS Female Swivel, 45 elbow (BF) BF G 3/ BF G BF6 G BF6 G / BF0 G / BF4 G / BF3 G BSP/JIS Female Swivel, 90 elbow (BFB) BFB G 3/ BFB G BFB6 G BFB6 G / BFB0 G / BFB4 G / BFB3 G NOT: The JIS parallel thread and BSPP connection are interchangeable. 04

38 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction KOS Swivel KOS Swivel KOS Swivel Straight 45 lbow 90 lbow Insertion Fitting Tube Length Part Number Thread O.. Size L inch mm inch mm inch mm inch mm KO Female Swivel, eavy uty (S) 0S M36 x S M4 x S6 M4 x Z5S6 M4 x S6 M5 x S0 M5 x Z3S6 M5 x Z3S0 M5 x KO Female Swivel, eavy uty, 45 lbow (S) 0S M36 x S M4 x S6 M4 x Z5S6 M4 x S6 M5 X S0 M5 x Z3S6 M5 X Z3S0 M5 x KO Female Swivel, eavy uty, 90 elbow (SB) 0SB M36 x SB M4 X SB6 M4 x Z5SB6 M4 x SB6 M5 X SB0 M5 x Z3SB6 M5 x Z3SB0 M5 x

39 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction L ORS Swivel ORS Swivel ORS Swivel Straight 45 lbow 90 lbow Insertion Fitting Length Part Number Thread Size L inch mm inch mm inch mm inch mm Female ORS Swivel, Straight FR 3/ FR 7/ FR6 7/ Z6FR6 7/ FR6 / FR0 / FR Z0FR6 / Z0FR0 / Z4FR Female ORS Swivel, 45 elbow FR 3/ FR 7/ FR6 7/ Z6FR6 7/ FR6 / FR0 / Z0FR6 / Z0FR0 / L L Female ORS Swivel, 90 elbow FRB 3/ FRB 7/ FRB6 7/ Z6FRB6 7/ FRB6 / FRB0 / Z0FRB6 / Z0FRB0 /

40 GLOBL SPIRL TTC Spiral TTC Fittings for use with hose: FC54, FC73, FC606, G466, G506 Fittings for use on 4 wire construction Z Fittings for use on 6 wire construction L S 37 (JIC) Swivel S 37 (JIC) Swivel S 37 (JIC) Swivel Straight 45 lbow 90 lbow Insertion Fitting Length Part Number Thread Size L inch mm inch mm inch mm inch mm S 37 (JIC) Swivel FJ / FJ 5/ FJ6 5/ Z6FJ6 5/ FJ6 5/ FJ0 5/ Z0FJ0 5/ FJ0 7/ Z4FJ0 7/ FJ4 7/ Z4FJ4 7/ FJ3 / Z3FJ3 / S 37 (JIC) Swivel, 45 elbow FJ / FJ 5/ FJ6 5/ FJ6 5/ FJ0 5/ Z0FJ0 5/ FJ4 7/ Z4FJ4 7/ S 37 (JIC) Swivel, 90 elbow FJB / FJB 5/ FJB6 5/ FJB6 5/ FJB0 5/ Z0FJB0 5/ FJB4 7/ Z4FJB4 7/ L L 07

41 SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) Male pipe S 37 (JIC) swivel S 37 (JIC) S straight thread FC956/FJ9759 FC955/FJ9760 male flare O-Ring male FJ9568 FJ9567 FC963/FJ995 FC97/FJ996 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size φ Male pipe FC S S FC347 06S / FC S S FC347 06S 3 / FC S S FC347 06S / FC S S FC347 08S / FC S S FC347 08S 3 / FC S S FC347 08S / FC956 08S 860 8S FC347 08S 3 / FC S S FC347 0S / FJ9759 S FC4 S FC40 S 3 / FJ S FC4 66S FC40 6S - / FJ S * * /4- / FJ S * * /- / FJ S * * - / S 37 (JIC) swivel FC S S FC347 06S 9 / FC S S FC347 06S 3 / FC S S FC347 08S 3 / FC S S FC347 08S 7 / FC955 08S S FC347 08S / FC955 00S S FC347 0S 7 / FC955 0S S FC347 0S / FJ9760 S FJ8760 S FC40 S / FJ9760 6S FJ8760 6S FC40 S 5 / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S * * 7 / FJ S * * / S 37 (JIC) male flare FC S S FC347 06S 9 / FC S S FC347 06S 3 / FC S S FC347 08S 3 / FC S S FC347 08S 7 / FC963 08S S FC347 08S / FC963 00S S FC347 0S 7 / FC963 0S S FC347 0S / FJ995 S FC474 S FC40 S / FJ995 6S FC474 6S FC40 S 5 / FJ995 66S FC474 66S FC40 6S 5 / S O-Ring male, see page 78 for O-Rings FC S S FC347 06S 9 / FC S S FC347 06S 3 / FC S S FC347 08S 3 / FC97 008S S FC347 08S 7 / FC97 00S S FC347 0S 7 / FC97 0S 86 0S FC347 0S / FJ996 S FC475 S FC40 S / FJ996 66S FC475 66S FC40 6S 5 / *Complete fittings are one-piece assemblies

42 SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) S 37 (JIC) swivel FC5963/FJ9775 / elbow S 37 (JIC) swivel FC5965/FJ elbow FC5967/FJ elbow S 37 (JIC) swivel ll dimensions in inches. FC967/FJ elbow FC5969/FJ / elbow FC965/FJ elbow Complete Component Part Numbers Fitting Part Number Nipple ssembly Socket Thread Size / elbow FC S FC S FC347 08S 3 / FJ9775 S FJ8775 S FC40 S / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S * * 7 / elbow FC S FC S FC347 08S 3 / FJ9776 S FJ8776 S FC40 S / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S 7 / elbow FC S FC S FC347 08S 3 / FC967 0S FC867 0S FC347 0S / FJ9777 S FJ8777 S FC40 S / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S * * 7 / elbow FC S FC S FC347 08S 3 / FJ9778 S FJ8778 S FC40 S / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S * * 7 / / elbow FC S FC S FC347 08S 3 / FJ9779 S FJ8779 S FC40 S / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S * * 7 / elbow FC S FC S FC347 08S 3 / FC965 0S FC865 0S FC347 0S / FJ9780 S FJ8780 S FC40 S / FJ S FJ S FC40 6S 5 / FJ S * * 5 / FJ S * * 7 / *Complete fittings are one-piece assemblies. 09

43 SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) Straight split flange / elbow split flange FJ9569/FC975/FJ976 Code 6 FJ957/FC999/FJ9763 Code 6 FC9853/FJ976 Code 6 FC5957/FJ9764 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. Kφ Size φ Straight split flange Code 6 (S J58) FC S FC S FC347 08S FC975 08S FC875 08S FC347 08S FC975 0S FC875 0S FC347 0S FJ976 S FJ876 S FC40 S FJ976 6S FJ876 6S FC40 S FJ976 66S FJ876 66S FC40 6S FJ976 06S FJ876 06S FC40 6S FJ976 00S * * FJ976 40S * * FJ976 44S * * FJ976 34S * * FJ S * * Straight split flange Code 6 (S J58) FC S FC S FC347 08S FJ976 S FJ876 S FC40 S FJ976 6S FJ876 6S FC40 S FJ976 66S FJ876 66S FC40 6S FJ976 06S FJ876 06S FC40 6S FJ976 00S * * FJ976 40S * * FJ976 44S * * FJ976 34S * * / elbow split flange Code 6 (S J58) FC S FC S FC347 08S FC999 08S FC899 08S FC347 08S FJ9763 S FJ8763 S FC40 S FJ9763 6S FJ8763 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * FJ957 33S * * / elbow split flange Code 6 (S J58) FC S FC S FC347 08S FJ9764 S FJ8764 S FC40 S FJ9764 6S FJ8764 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages K K 0

44 SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) 30 elbow split flange 45 elbow split flange FJ9573/FJ9765 Code 6 FJ9575/FC974/FJ9767 Code 6 FC9854/FJ9766 Code 6 FC9855/FJ9768 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 30 elbow split flange Code 6 (S J58) FJ9765 S FJ8765 S FC40 S FJ9765 6S FJ8765 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FC S FC S FC347 08S FJ9766 S FJ8766 S FC40 S FJ9766 6S FJ8766 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FC S FC S FC347 08S FC974 08S FC874 08S FC347 08S FC974 0S FC874 0S FC347 0S FJ9767 S FJ8767 S FC40 S FJ9767 6S FJ8767 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FC S FC S FC347 08S FJ9768 S FJ8768 S FC40 S FJ9768 6S FJ8768 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages K K

45 SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) ll dimensions in inches. Complete Component Part Numbers Flange Fitting Part Number Nipple ssy. Socket ead ia. K Size 60 elbow split flange Code 6 (SJ58) FC S FC S FC347 08S FC980 08S FC880 08S FC347 08S FJ9769 S FJ8769 S FC40 S FJ9769 6S FJ8769 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * elbow split flange Code 6 (SJ58) FC S FC S FC347 08S FJ9770 S FJ8770 S FC40 S FJ9770 6S FJ8770 6S FC40 S FJ S FJ S FC40 6S FJ S FJ S FC40 6S FJ S * * FJ S * * FJ S * * FJ S * * / elbow split flange Code 6 (SJ58) FC S FC S FC347 08S FC976 08S FC876 08S FC347 08S FJ977 S FJ877 S FC40 S FJ977 6S FJ877 6S FC40 S FJ977 66S FJ877 66S FC40 6S FJ977 06S FJ877 06S FC40 6S FJ977 00S * * FJ977 40S * * FJ977 44S * * FJ977 34S * * FJ S * * / elbow split flange Code 6 (SJ58) FC S FC S FC347 08S FJ977 S FJ877 S FC40 S FJ977 6S FJ877 6S FC40 S FJ977 66S FJ877 66S FC40 6S FJ977 06S FJ877 06S FC40 6S FJ977 00S * * FJ977 40S * * FJ977 44S * * FJ977 34S * * *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages K 60 elbow split flange FC980/FJ9769 Code 6 FC7330/FJ9770 Code 6 K 67 / elbow split flange FJ9579/FC976/FJ977 Code 6 FC5960/FJ977 Code 6

46 SPIRL SINGL SKIV CRIMP for use with FC736 ( 06 thru 0), FC36 ( 06 thru 3), FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 06 thru 3) K 90 elbow split flange FJ958/FC977/FJ9773 Code 6 FC9856/FJ9774 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 90 elbow split flange Code 6 (SJ58) FC S FC S FC347-08S FC977-08S FC877-08S FC347-08S FC977-0S FC877-0S FC347-0S FJ9773-S FJ8773-S FC40-S FJ9773-6S FJ8773-6S FC40-S FJ S FJ S FC40-6S FJ S FJ S FC40-6S FJ S * * FJ S * * FJ S * * FJ S * * FJ958-33S * * elbow split flange Code 6 (SJ58) FC S FC S FC347-08S FC S FC S FC347-08S FJ9774-S FJ8774-S FC40-S FJ9774-6S FJ8774-6S FC40-S FJ S FJ S FC40-6S FJ S FJ S FC40-6S FJ S * * FJ S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. NOT: For flanges, split flange halves, kits and O-Rings, see pages

47 SPIRL SINGL SKIV CRIMP for use with FC36, FC736, FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 8,, 6, 0, 4) C ORS Swivel Straight FJ9606/FJ9896 ll dimensions in inches. ORS Swivel 45 elbow FJ9609/FJ9897 Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C Ø Straight FJ S FJ S FC347 06S / FJ S FJ S FC347 08S 3 / FJ9896 S FJ8896 S FC40 S 3 / FJ9896 6S FJ8896 6S FC40 S 7 / FJ S FJ S FC40 6S 7 / FJ S * * / FJ S * * elbow FJ S FJ S FC347 08S 3 / FJ9897 S FJ8897 S FC40 S 3 / FJ S FJ S FC40 6S 7 / FJ S * * / FJ S * * elbow (short) FJ S FJ S FC347 08S 3 / FJ9898 S FJ8898 S FC40 S 3 / FJ9898 6S FJ8898 6S FC40 S 7 / FJ S FJ S FC40 6S 7 / FJ S * * / FJ S * * elbow (long) FJ S FJ S FC347 08S 3 / FJ9899 S FJ8899 S FC40 S 3 / FJ S FJ S FC40 6S 7 / FJ S * * / FJ S * * NOT: see page 78 for O-Rings. ORS Swivel 90 elbow (short) FJ96/FJ9898 ORS Swivel 90 elbow (long) FJ975/FJ9899 for use with FC36, FC736, FC54 ( 0, 4), FC33 (, 6, 0, 4), FC34 (, 6), G493 ( 8,, 6, 0, 4) 30 swivel Metric threads FJ788 06S FJ688 06S FC40 S M30x FJ788 06S FJ688 06S FC40 6S M33x FJ788 0S * * M36x FJ788 44S * * M4x *Complete fittings are one-piece assemblies swivel Metric threads Special Komatsu FJ788 4

48 SPIRL SINGL SKIV CRIMP for use with FC Male pipe FJ9759 S 37 (JIC) swivel FJ9760 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C Ø Male pipe FJ S FC4 0808S FC40 08S 3 / S 37 (JIC) swivel FJ S FJ S FC40 08S 3 /

49 SPIRL SINGL SKIV CRIMP for use with FC54, FC73 Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C Ø Male pipe FJ978 08S * * / FJ978 S * * 3 / FJ978 6S * * - / FJ978 6S * * 3 / FJ978 66S * * - / FJ978 06S * * /4- / S 37 (JIC) swivel FJ978 S * * / FJ978 6S * * 5 / FJ978 66S * * 5 / FJ978 06S * * 5 / S 37 (JIC) male flare 30 Male pipe FJ978 FJ997 S * * / FJ997 6S * * 5 / FJ997 66S * * 5 / FJ997 06S * * 5 / S 37 (JIC) swivel FJ978 S 37 (JIC) male flare FJ997 *Complete fittings are one-piece assemblies. 6

50 SPIRL SINGL SKIV CRIMP FITTING for use with FC54, FC73 ll dimensions in inches. S 37 (JIC) swivel FJ9797 / elbow FJ elbow FJ elbow S 37 (JIC) swivel FJ elbow Complete Component Part Numbers / elbow Fitting Part Number Nipple ssy. Socket Thread Size Ø FJ9797 S * * / FJ S * * 5 / elbow FJ9798 S * * / FJ S * * 5 / elbow FJ9799 S * * / FJ S * * 5 / S 37 (JIC) swivel FJ elbow FJ / elbow 60 elbow FJ9800 S * * / FJ S * * 5 / / elbow FJ980 S * * / FJ980 66S * * 5 / elbow FJ980 S * * / FJ980 66S * * 5 / *Complete fittings are one-piece assemblies. 7

51 SPIRL SINGL SKIV CRIMP FITTING for use with FC54, FC73 K ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. KØ Size Ø Straight split flange Code 6 (S J58) FJ9783 S * * FJ9783 6S * * FJ S * * FJ S * * Straight split flange Code 6 (S J58) FJ9784 S * * FJ9784 6S * * FJ S * * FJ S * * Straight split flange FJ9783 Code 6 FJ9784 Code 6 K / elbow split flange FJ9785 Code 6 FJ9786 Code 6 / elbow split flange Code 6 (S J58) FJ9785 S * * FJ9785 6S * * FJ S * * FJ S * * / elbow split flange Code 6 (S J58) FJ9786 S * * FJ9786 6S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages

52 SPIRL SINGL SKIV CRIMP for use with hose FC54, FC73 ll dimensions in inches. K 30 elbow split flange FJ9787 Code 6 FJ9788 Code 6 K 45 elbow split flange FJ9789 Code 6 FJ9790 Code 6 Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 30 elbow split flange Code 6 (S J58) FJ9787 S * * FJ9787 6S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FJ9788 S * * FJ9788 6S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FJ9789 S * * FJ9789 6S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FJ9790 S * * FJ9790 6S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages

53 SPIRL SINGL SKIV CRIMP for use with FC54, FC73 K 60 elbow split flange FJ979 Code 6 FJ979 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 60 elbow split flange Code 6 (S J58) FJ979 S * * FJ979 6S * * FJ979 66S * * FJ979 06S * * elbow split flange Code 6 (S J58) FJ979 S * * FJ979 6S * * FJ979 66S * * FJ979 06S * * K 67 / elbow split flange FJ9793 Code 6 FJ9794 Code 6 67 / elbow split flange Code 6 (S J58) FJ9793 S * * FJ9793 6S * * FJ S * * FJ S * * / elbow split flange Code 6 (S J58) FJ9794 S * * FJ9794 6S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages

54 SPIRL SINGL SKIV CRIMP for use with FC54, FC73 ll dimensions in inches. K 90 elbow split flange FJ9795 Code 6 FJ9796 Code 6 Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. Kφ Size φ 90 elbow split flange Code 6 (S J58) FJ9795 S * * FJ9795 6S * * FJ S * * FJ S * * elbow split flange Code 6 (S J58) FJ9796 S * * FJ9796 6S * * FJ S * * FJ S * * *Complete fittings are one-piece assemblies. Note: For flanges, split flange halves, kits and O-Rings, see pages 76-79

55 SPIRL SINGL SKIV CRIMP for use with FC54, FC73 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size C φ Straight C FJ9900 S * * 3 / FJ S * * 7 / elbow ORS Swivel Straight FJ9900 ORS Swivel 45 elbow FJ990 FJ990 S * * 3 / FJ990 66S * * 7 / ORS Swivel 90 elbow (short) FJ990 ORS Swivel 90 elbow (long) FJ elbow (short) FJ990 S * * 3 / FJ990 66S * * 7 / elbow (long) FJ9903 S * * 3 / FJ S * * 7 / *Complete fittings are one-piece assemblies. NOT: see page 78 for O-Rings.

56 INTRNL SKIV CRIMP * for use with FC36 ( 6 through 3),** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) 30 Male pipe S 37 (JIC) swivel S 37 (JIC) male flare FC558 FC504 FC506 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size Male pipe FC S FC S FC540 08S 3 / FC S FC S FC540 08S I / FC558 S FC70 S FC77 S 3 / FC558 66S FC70 66S FC540 6S - / FC558 06S FC70 06S FC540 6S /4- / FC558 00S FC70 00S FC540 0S /4- / FC558 40S FC70 40S FC540 0S /- / FC558 44S FC70 44S FC540 4S /- / FC558 34S FC70 34S FC540 4S - / FC558 33S FC70 33S FC540 3S - / S 37 (JIC) swivel FC S FC S FC540 08S 3 / FC504 S FC404 S FC77 S / FC504 66S FC404 66S FC540 6S 5 / FC504 00S FC404 00S FC540 0S 5 / FC504 40S FC404 40S FC540 0S 7 / FC504 44S FC404 44S FC540 4S 7 / FC504 33S FC404 33S FC540 3S / S 37 (JIC) male flare FC506 S FC697 S FC77 S / FC506 66S FC697 66S FC540 6S 5 / FC506 00S FC697 00S FC540 0S 5 / FC506 44S FC697 44S FC540 4S 7 / S 37 (JIC) FJ909 / elbow FC elbow / elbow FJ909 S FJ809 S FC77 S / FJ909 66S FJ809 66S FC540 6S 5 / FJ909 00S FJ809 00S FC540 0S 5 / FJ909 44S FJ809 44S FC540 4S 7 / elbow FC557 S FC457 S FC77 S / FC557 66S FC457 66S FC540 6S 5 / FC557 00S FC457 00S FC540 0S 5 / FC557 44S FC457 44S FC540 4S 7 / elbow FC556 S FC456 S FC77 S / FC556 66S FC456 66S FC540 6S 5 / FC556 00S FC456 00S FC540 0S 5 / FC556 44S FC456 44S FC540 4S 7 / elbow FJ9030 S FJ8030 S FC77 S /l FJ S FJ S FC540 6S 5 / FJ S FJ S FC540 0S 5 / FJ S FJ S FC540 4S 7 / *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC S, and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. S 37 (JIC) 45 elbow FC556 S 37 (JIC) 60 elbow FJ9030 3

57 INTRNL SKIV CRIMP * for use with FC36 ( 6 thru 3),** FC54, FC33, FC34 (, 6 only), FC736 ( 6, 0 only) S 37 (JIC) FJ / elbow ll dimensions in inches. Complete Component Part Numbers Thread Fitting Flange ead Part Number Nipple ssy. Socket ia. K Size 67 / elbow FJ903 S FJ803 S FC77 S / FJ903 66S FJ803 66S FC540 6S 5 / FJ903 00S FJ803 00S FC540 0S 5 / FJ903 44S FJ803 44S FC540 4S 7 / elbow FC5564 S FC4564 S FC77 S / FC S FC S FC540 6S 5 / FC S FC S FC540 0S 5 / FC S FC S FC540 4S 7 / Straight split flange Code 6 (S J58) FC5050 S FC4050 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S Straight split flange Code 6 (S J58) FC5049 S FC4049 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S K / elbow split flange Code 6 (S J58) FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S NOT: For flanges, split flange halves, kits and O Rings, see pages *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. S 37 (JIC) 90 elbow FC5564 K / elbow split flange FC5507 Code 6 Straight Split Flange FC5050 Code 6 FC5049 Code 6 4

58 INTRNL SKIV CRIMP * for use with FC36 ( 6 through -3), ** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) K 30 elbow split flange 45 elbow split flange / elbow split flange FC56 Code 6 FC505 Code 6 FC5374 Code 6 FC5387 Code 6 FC505 Code 6 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size / elbow split flange Code 6 (S J58) FC5374 S FC4374 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S elbow split flange Code 6 (S J58) FC56 S FC46 S FC77 S FC56 66S FC46 66S FC540 6S FC56 06S FC46 06S FC540 6S FC56 00S FC46 00S FC540 0S FC56 40S FC46 40S FC540 0S FC56 44S FC46 44S FC540 4S FC56 34S FC46 34S FC540 4S FC56 33S FC46 33S FC540 3S elbow split flange Code 6 (S J58) FC5387 S FC4387 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S elbow split flange Code 6 (S J58) FC505 S FC405 S FC77 S FC505 66S FC405 66S FC540 6S FC505 06S FC405 06S FC540 6S FC505 00S FC405 00S FC540 0S FC505 40S FC405 40S FC540 0S FC505 44S FC405 44S FC540 4S FC505 34S FC405 34S FC540 4S FC505 33S FC405 33S FC540 3S elbow split flange Code 6 (S J58) FC505 S FC405 S FC77 S FC505 66S FC405 66S FC540 6S FC505 06S FC405 06S FC540 6S FC505 00S FC405 00S FC540 0S FC505 40S FC405 40S FC540 0S FC505 44S FC405 44S FC540 4S FC505 34S FC405 34S FC540 4S FC505 33S FC405 33S FC540 3S NOT: For flanges, split flange halves, kits and O Rings, see pages *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. K K 5

59 INTRNL SKIV CRIMP * for use with FC36 ( 6 through 3),** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) ll dimensions in inches. Complete K Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 60 elbow split flange Code 6 (S J58) FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S elbow split flange Code 6 (S J58) FC558 66S FC458 66S FC540 6S FC558 06S FC458 06S FC540 6S FC558 00S FC458 00S FC540 0S FC558 40S FC458 40S FC540 0S FC558 44S FC458 44S FC540 4S FC558 34S FC458 34S FC540 4S FC558 33S FC458 33S FC540 3S / elbow split flange Code 6 (S J58) FC553 S FC453 S FC77 S FC553 66S FC453 66S FC540 6S FC553 06S FC453 06S FC540 6S FC553 00S FC453 00S FC540 0S FC553 40S FC453 40S FC540 0S FC553 44S FC453 44S FC540 4S FC553 34S FC453 34S FC540 4S FC553 33S FC453 33S FC540 3S / elbow split flange Code 6 (S J58) FC5373 S FC4373 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S elbow split flange Code 6 (S J58) FC5054 S FC4054 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S elbow split flange FC5504 Code 6 FC558 Code 6 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC558 08S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. NOT: For flanges, split flange halves, kits and O-Rings, see pages K 67 / elbow split flange FC553 Code 6 FC5373 Code 6 K 90 elbow split flange FC5054 Code 6 6

60 INTRNL SKIV CRIMP * for use with FC36 ( 6 TRU -3), ** FC54, FC33, FC34 (, 6 only) FC736 ( 6, 0 only) ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. KØ Size Ø 90 elbow split flange Code 6 (S J58) FC5053 S FC4053 S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC540 0S FC S FC S FC540 0S FC S FC S FC540 4S FC S FC S FC540 4S FC S FC S FC540 3S K 90 elbow split flange FC5053 Code 6 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC558 08S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. NOT: For flanges, split flange halves, kits and O-Rings, see pages

61 INTRNL SKIV CRIMP * for use with hose FC36 ( 6 thru 3)**, FC54, FC33, FC34 (, 6 only), FC73 (, 6), FC736 ( 6, 0 only) C Complete Component Part Numbers Straight Fitting Part Number Nipple ssy. Socket Thread Size C Ø FJ9608 S FJ8608 S FC77 S 3 / FJ S FJ S FC540 6S 7 / FJ S FJ S FC540 0S / FJ S FJ S FC540 4S elbow ORS Swivel Straight FJ9608 ll dimensions in inches. FJ96 S FJ86 S FC77 S 3 / FJ96 66S FJ86 66S FC540 6S 7 / FJ96 00S FJ86 00S FC540 0S / FJ96 44S FJ86 44S FC540 4S elbow (short) FJ964 S FJ864 S FC77 S 3 / FJ964 66S FJ864 66S FC540 6S 7 / FJ964 00S FJ864 00S FC540 0S / FJ964 44S FJ864 44S FC540 4S elbow (long) ORS Swivel 45 elbow FJ96 ORS Swivel 90 elbow (short) FJ964 FJ977 S FJ877 S FC77 S 3 / FJ977 66S FJ877 66S FC540 6S 7 / FJ977 00S FJ877 00S FC540 0S / FJ977 44S FJ877 44S FC540 4S ORS Swivel 90 elbow (long) FJ977 *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC558 08S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. **See pages 08- for FC36 sizes 8 and. NOT: For flanges, split flange halves, kits and O-Rings, see pages

62 INTRNL SKIV CRIMP * for use with hose FC73, FC35 ll dimensions in inches. Complete Component Part Numbers Male pipe Fitting Part Number Nipple ssy. Socket Thread Size FC53 S FC70 S FC77 S 3 / FC53 66S FC70 66S FC540 6S - / FC53 00S FC70 00S FC77 0S /4- / FC53 44S FC70 44S FC77 4S /- / FC53 33S FC70 33S FC77 3S - / S 37 (JIC) swivel 30 Male pipe FC53 FC53 S FC404 S FC77 S / FC53 66S FC404 66S FC540 6S 5 / FC53 00S FC404 00S FC77 0S 5 / FC53 40S FC404 40S FC77 0S 7 / FC53 44S FC404 44S FC77 4S 7 / FC53 33S FC404 33S FC77 3S / S 37 (JIC) swivel FC53 S 37 (JIC) male flare FC533 S 37 (JIC) male flare FC533 S FC697 S FC77 S / FC533 66S FC697 66S FC540 6S 5 / FC533 00S FC697 00S FC77 0S 5 / FC533 44S FC697 44S FC77 4S 7 / *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC s, FC s and FC s fittings can be crimped on FT44 machines by using special equipment and procedures. 9

63 INTRNL SKIV CRIMP * for use with hose FC73, FC35 ll dimensions in inches. Complete Component Part Numbers / elbow Fitting Part Number Nipple ssy. Socket Thread Size Ø FJ9035 S FJ809 S FC77 S / FJ S FJ809 66S FC540 6S 5 / FJ S FJ809 00S FC77 0S 5 / FJ S FJ809 44S FC77 4S 7 / elbow FJ9036 S FC457 S FC77 S / FJ S FC457 66S FC540 6S 5 / FJ S FC457 00S FC77 0S 5 / FJ S FC457 44S FC77 4S 7 / elbow S 37 (JIC) / elbow FJ9035 FC5560 S FC456 S FC77 S / FC S FC456 66S FC540 6S 5 / FC S FC456 00S FC77 0S 5 / FC S FC456 44S FC77 4S 7 / S 37 (JIC) 30 elbow FJ9036 S 37 (JIC) 45 elbow FC elbow FJ9037 S FJ8030 S FC77 S / FJ S FJ S FC540 6S 5 / FJ S FJ S FC77 0S 5 / FJ S FJ S FC77 4S 7 / / elbow FJ9038 S FJ803 S FC77 S / FJ S FJ803 66S FC540 6S 5 / FJ S FJ803 00S FC77 0S 5 / FJ S FJ803 44S FC77 4S 7 / elbow S 37 (JIC) 60 elbow FJ9037 S 37 (JIC) 67 / elbow FJ9038 FC5503 S FC4564 S FC77 S / FC S FC S FC540 6S 5 / FC S FC S FC77 0S 5 / FC S FC S FC77 4S 7 / *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC s, FC s and FC s fittings can be crimped on FT44 machines by using special equipment and procedures. S 37 (JIC) 90 elbow FC

64 INTRNL SKIV CRIMP * for use with FC73, FC35 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size Straight split flange Code 6 (S J58) FC535 S FC4049 S FC77 S FC535 6S FC4049 6S FC77 S FC535 66S FC S FC540 6S FC535 06S FC S FC540 6S FC535 00S FC S FC77 0S FC535 40S FC S FC77 0S FC535 44S FC S FC77 4S FC535 34S FC S FC77 4S FC535 33S FC S FC77 3S / elbow split flange Code 6 (S J58) K Straight split flange FC535 Code 6 FC537 S FC4374 S FC77 S FC537 6S FC4374 6S FC77 S FC537 66S FC S FC540 6S FC537 06S FC S FC540 6S FC537 00S FC S FC77 0S FC537 40S FC S FC77 0S FC537 44S FC S FC77 4S FC537 34S FC S FC77 4S FC537 33S FC S FC77 3S K / elbow split flange FC537 Code 6 K 30 elbow split flange FC5370 Code 6 30 elbow split flange Code 6 (S J58) FC5370 S FC4387 S FC77 S FC5370 6S FC4387 6S FC77 S FC S FC S FC540 6S FC S FC S FC540 6S FC S FC S FC77 0S FC S FC S FC77 0S FC S FC S FC77 4S FC S FC S FC77 4S FC S FC S FC77 3S *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: For flanges, split flange halves, kits and O-Rings, see pages

65 INTRNL SKIV CRIMP * for use with hose FC73, FC35 K 45 elbow split flange Code 6 FC537 K 60 elbow split flange Code 6 FJ903 ll dimensions in inches. Complete Component Part Numbers Flange Fitting ead Part Number Nipple ssy. Socket ia. K Size 45 elbow split flange Code 6 (S J58) FC537 S FC405 S FC77 S FC537 6S FC405 6S FC77 S FC537 66S FC405 66S FC540 6S FC537 06S FC405 06S FC540 6S FC537 00S FC405 00S FC77 0S FC537 40S FC405 40S FC77 0S FC537 44S FC405 44S FC77 4S FC537 34S FC405 34S FC77 4S FC537 33S FC405 33S FC77 3S elbow split flange Code 6 (S J58) FJ903 S FC458 S FC77 S FJ903 6S FC458 6S FC77 S FJ903 66S FC458 66S FC540 6S FJ903 06S FC458 06S FC540 6S FJ903 00S FC458 00S FC77 0S FJ903 40S FC458 40S FC77 0S FJ903 44S FC458 44S FC77 4S FJ903 34S FC458 34S FC77 4S FJ903 33S FC458 33S FC77 3S / elbow split flange Code 6 (S J58) FC537 S FC4373 S FC77 S FC537 6S FC4373 6S FC77 S FC537 66S FC S FC540 6S FC537 06S FC S FC540 6S FC537 00S FC S FC77 0S FC537 40S FC S FC77 0S FC537 44S FC S FC77 4S FC537 34S FC S FC77 4S FC537 33S FC S FC77 3S elbow split flange Code 6 (S J58) FC539 S FC4053 S FC77 S FC539 6S FC4053 6S FC77 S FC539 66S FC S FC540 6S FC539 06S FC S FC540 6S FC539 00S FC S FC77 0S FC539 40S FC S FC77 0S FC539 44S FC S FC77 4S FC539 34S FC S FC77 4S FC539 33S FC S FC77 3S *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: For flanges, split flange halves, kits and O-Rings, see pages K 67 / elbow split flange Code 6 FC537 K 90 elbow split flange Code 6 FC539 3

66 INTRNL SKIV CRIMP * for use with hose FC73, FC35 ORS Swivel Straight FJ978 ll dimensions in inches. Complete Fitting Component Part Numbers Part Number Nipple ssy. Socket Thread Size C Straight C FJ978 S FJ8608 S FC77 S 3 / FJ978 66S FJ S FC540 6S 7 / FJ978 00S FJ S FC77 0S / FJ978 44S FJ S FC77 4S elbow ORS Swivel 45 elbow FJ979 FJ979 S FJ86 S FC77 S 3 / FJ979 66S FJ86 66S FC540 6S 7 / FJ979 00S FJ86 00S FC77 0S / FJ979 44S FJ86 44S FC77 4S ORS Swivel 90 elbow (short) FJ970 ORS Swivel 90 elbow (long) FJ97 90 elbow (short) FJ970 S FJ864 S FC77 S 3 / FJ970 66S FJ864 66S FC540 6S 7 / FJ970 00S FJ864 00S FC77 0S / FJ970 44S FJ864 44S FC77 4S elbow (long) FJ97 S FJ877 S FC77 S 3 / FJ97 66S FJ877 66S FC540 6S 7 / FJ97 00S FJ877 00S FC77 0S / FJ97 44S FJ877 44S FC77 4S *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC S, FC S and FC S fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: see page 78 for O-Rings. 33

67 INTRNL SKIV CRIMP * for use with hose FC606 Straight split flange FJ76 Code 6 ll dimensions in inches. K Complete Component Part Numbers Flange ead Fitting ia. K Part Number Nipple ssy. Socket Thread Size C Straight split flange Code 6 (S J58) FJ76 66S FJ66 66S FC60 6S FJ76 60S FJ66 60S FC60 0S FJ76 00S FJ66 00S FC60 0S elbow split flange Code 6 (S J58) 45 elbow split flange FJ774 Code 6 K 90 elbow split flange FJ777 Code 6 FJ774 66S FJ674 66S FC60 6S FJ774 00S FJ674 00S FC60 0S C ORS straight FJ elbow split flange Code 6 (S J58) FJ777 66S FJ677 66S FC60 6S FJ777 00S FJ677 00S FC60 0S ORS straight FJ760 66S FJ660 66S FC60 6S 7 / *Internal skive crimp fittings cannot be crimped on FT44 machines, except as follows: FC s, FC s and FC s fittings can be crimped on FT44 machines by using special equipment and procedures. NOT: For flanges, split flange halves, kits and O-Rings, see pages

68 POLYON SWG for use with FC37, FC373, FC374, FC375, FC690 ll dimensions in inches. Male Pipe FC5805 NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. 30 Complete Male Pipe Fitting Part Number ie Part No. Pusher Part No. Thread Size Ø FC S FT43 00 FT43 50 / FC S FT FT43 50 / FC S FT FT / FC S FT FT / FC S FT FT43 50 / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC5805 S FT43 00 FT / FC S FT FT / Female Pipe FC5806 S 37 (JIC) male Flare FC5807 Female pipe FC S FT FT43 50 / FC S FT FT / S 37 (JIC) male flare FC S FT FT / FC S FT FT / FC S FT FT43 50 / FC S FT FT43 50 / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT43 50 / FC5807 S FT43 00 FT43 50 / Two die sets are required for FT

69 POLYON SWG for use with hose FC37, FC373, FC374, FC375, FC690 ll dimensions in inches. NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. Complete Fitting Part Number ie Part No. Pusher Part No. Thread Size S 45 male flare FC S FT FT43 50 / FC S FT FT / FC S FT FT / FC S FT FT / Male O-Ring boss S 45 male flare FC5808 FC S FT FT / FC S FT FT43 50 / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / S straight thread O-Ring male** FC5809 S 37 (JIC) swivel FC580 S 37 (JlC) swivel FC S FT43 00 FT43 50 / FC S FT FT / FC S* FT FT / FC S FT FT43 50 / FC S* FT FT / FC S FT FT43 50 / FC S FT FT / FC S FT FT43 50 / FC S FT FT / FC S* FT FT / FC S FT FT / FC S FT FT / FC S* FT FT / FC S FT FT / FC580 08S FT FT / FC580 00S FT FT / FC580 S* FT43 00 FT / FC580 66S* FT FT / *lso available in 36 stainless steel, substitute 59 for S in base part number when ordering. **67 O-Ring supplied, see page 78 for additional O-Rings. Two die sets are required for FT

70 POLYON SWG for use with FC37, FC373, FC374, FC375, FC690 Two die sets are required for FT S 45 swivel Male pipe swivel 45 elbow universal swivel 90 elbow universal swivel FC5936 FC5937 ll dimensions in inches. S 37 (JIC) swivel S 37 (JIC) swivel NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. FC583 FC584 Complete Fitting Part Number ie Part No. Pusher Part No. Thread Size S 45 swivel FC S FT FT / FC S FT FT43 50 / FC S FT FT / FC S FT FT43 50 / FC S FT FT / FC S FT FT43 50 / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC58 008S FT FT / Male pipe swivel FC S FT FT / FC S FT FT / FC S FT FT / FC58 S FT43 00 FT / elbow universal swivel/s 37 (JIC) swivel FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC583 S FT43 00 FT / FC583 66S FT FT / elbow universal swivel/s 37 (JIC) swivel FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC S FT FT / FC584 S FT43 00 FT / FC584 66S FT FT /

71 POLYON SWG for use with hose FC37, FC373, FC374, FC375, FC690 NOT: Fittings on this page may be swaged or crimped. See bulletin J55 for crimp information. Complete Fitting Thread Part Number ie Part No. Pusher Part No. T Size C Straight FJ S FT FT / FJ S FT FT / FJ S FT FT / FJ S FT FT FJ9480 S FT43 00 FT / FJ S FT FT / elbow C ORS Swivel Straight FJ9480 ll dimensions in inches. ORS Swivel 45 elbow FJ948 FJ S FT FT / FJ S FT FT / FJ S FT FT / FJ948 S FT43 00 FT / FJ948 66S FT FT / ORS Swivel 90 elbow (short) FJ948 ORS Swivel 90 elbow (long) FJ elbow (short) FJ S FT FT / FJ S FT FT / FJ S FT FT / FJ948 S FT43 00 FT / FJ948 66S FT FT / elbow (long) FJ S FT FT / FJ S FT FT / FJ S FT FT / FJ9483 S FT43 00 FT / FJ S FT FT / Two die sets are required for FT See page 78 for O-Rings. 38

72 SWG for use with hose FC70, FC70 ll dimensions in inches. Complete Fitting Thread Part Number ie Part No. Pusher Part No. T Size C Swage male pipe FJ937 S FT43 00 FT / FT84 00 FT84 50 FJ500 S** FT43 00 FT / FT84 00 FT84 50 FJ937 66S FT FT / FT FT FJ937 00S FT FT /4- / FT FT Swage male pipe fitting FJ937/FJ500 Swage hose mender fitting FJ9373/FJ7938/FJ50 Swage hose mender Yoke Part No. FJ9373 S FT84 00 * FT FJ50 S** FT84 00 * FT FJ S FT * FT FJ S FT * FT *Two die sets are required for assembly of the swage mender fitting when using the FT84 tool. **For FC70 hose only. 39

73 PTF CRIMP for use with hose 807, FC86, FC465, FC645 Male Pipe S 37 (JIC) swivel ll dimensions in inches. FC9846 Complete Component Part Numbers Fitting Part Number Nipple ssy. Socket Thread Size X X Male pipe FC S* FC S** FC S / FC S* FC S** FC S / FC S* FC S** FC S / FC S* FC S** FC S / FC S* FC S** FC S 3 / FC S* FC S** FC S 3 / FC S* FC S** FC S / FC S* FC S** FC S / FC9846 S* FC3680 S** FC3596 S 3 / FC S* FC S** FC3596 6S - / Male pipe stainless steel FC FC FC C / FC FC FC C / FC FC FC C / FC FC FC C / FC FC FC C 3 / FC FC FC C 3 / FC FC FC C / FC FC FC3596 C 3 / FC FC FC3596 6C - / S 37 (JIC) swivel FC S FC S FC S 7 / FC S FC S FC S / FC S FC S FC S 9 / FC S FC S FC S 3 / FC S FC S FC S 7 / FC9779 S FC8779 S FC3596 S / FC S FC S FC3596 6S 5 / S 37 (JIC) swivel stainless steel 30 FC FC FC C 7 / FC FC FC C / FC FC FC C 9 / FC FC FC C 3 / FC FC FC C 7 / FC FC FC3596 C / FC FC FC3596 6C 5 / *For Brass drop S suffix, replace with 38. **For Brass drop S suffix, replace with B. For Brass drop S suffix, replace with

74 PTF CRIMP for use with hose 807, FC86, FC465, FC645 ll dimensions in inches. Complete Component Part Numbers Fitting Part Number Nipple ssy.* Socket Thread Size S 45 swivel S 45 swivel FC76 FC S FC S FC S 7 / FC S FC S FC S / FC S FC S FC S 5 / FC S FC S FC S 3 / FC76 00S FC66 00S FC S 7 / FC76 S FC66 S FC3596 S / elbow universal FC70 90 elbow FC5098 universal FC77 S elbow FC S FC S FC S 3 / elbow FC S FC S FC S 7 / FC S FC S FC S 5 / *vailable with brass nipples, contact aton eroquip. 4

75 PTF CRIMP for use with FC363, FC364, FC563 ll dimensions in inches. Complete Fitting Component Part Numbers Male pipe stainless steel Part Number Nipple ssy. Socket Stainless Steel Stainless Steel Stainless Steel Thread Size K FJ FC FC / FJ FC FC / FJ FC FC / FJ FC FC /4- / FJ FC FC /- / FJ FC FC / S 37 (JIC) swivel stainless steel FJ FJ FC / FJ FJ FC / FJ FJ FC / FJ FJ FC / FJ FJ FC / FJ FJ FC / Flange retainer stainless steel FJ FC FC FJ FC FC FJ FC FC FJ FC FC FJ FC FC FJ FC FC Flange retainer with PTF coated nipple FJ FC FC FJ FC FC FJ FC FC FJ FC FC FJ FC FC FJ FC FC Ladish Tri-Clamp* FJ FC FC FJ FC FC FJ FC FC *Tri-Clamp is a registered trademark of the Ladish Co., Tri-clover ivision. J 30 Male Pipe FJ9588 M I. Flange FC389 L I. S 37 (JIC) swivel FJ9587 K Flange Retainer FJ9656 Flange Retainer with PTF coated nipple FJ9656 Part Number Number Stainless Bolt Steel Size oles J L M FC C FC389 C FC389 66C FC389 00C FC389 44C FC389 33C K K Ladish Tri-Clamp* FJ704 4

76 SUCTION OS for use with 66, FC38 ll dimensions in inches. Complete Component Part Numbers Thread Fitting Flange ead Part Number Nipple ssy. Socket ia. Kφ Size φ Straight split flange Code 6 (SJ58) FC S FC S FC303 40S elbow split flange Code 6 (SJ58) FC S FC S FC303 40S elbow split flange Code 6 (SJ58) K Straight split flange Code 6 FC953 FC S FC S FC303 40S K 45 elbow split flange Code 6 FC955 K 90 elbow split flange Code 6 FC95 NOT: For flanges, split flange halves, kits and O-Rings, see pages

77 44

78 RUSBL ash Size Thread Size φ 4 4S* / S* / S* / S* / S* / S 3 / S* 3 / S / S* / S* 3 / S* 3 / S 3 / S - / S - / S /4- / S /4- / S /- / S - / / ash Size Thread Size φ 44 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Male pipe Male pipe 44 4S / S / S / S / S 3 / S / S 3 / S / S / S 3 / S / S 3 / S 37 (JIC) swivel* ash Size Thread Size φ 4 4S* 7 / S* / S* 9 / S* 3 / S* 7 / S* / S* 5 / S* 5 / S* 7 / S* / * * 3 / S 37 (JIC) swivel 44 ash Size Thread Size φ 44 4S 7 / S 7 / S / S 9 / S 3 / S 9 / S 3 / S 7 / S 3 / S 7 / S / S 7 / S / S 3 / S 5 / S 5 / S 5 / S 7 / S / *Requires assembly tools for assembly. S 45 swivel * 40 ash Size Thread Size φ 40 4S* 7 / S* / S* 5 / S* 3 / S* 7 / S* / S 45 swivel 440 ash Size Thread Size φ 440 4S 7 / S / S 5 / S 3 / S 7 / S / PTT swivel* 406 ash Size Thread Size φ 406 6B 5 / B 5 / B 7 / NOT: For correct socket part number, see page 73. lso supplied in brass. To order substitute B for S in part number. Wet air brake system can cause fitting corrosion, if encountered use an all brass fitting (substitute B for S in part number, or steel fittings with brass nipples (add 63 prefix and drop S suffix in part number). vailable in stainless steel. To order drop the S suffix and add 59 prefix. lso supplied in steel. To order drop B suffix and substitute S in part number. R U S B L ll dimensions in inches. 45

79 RUSBL R U S B L S male O-Ring boss** ash Size Thread Size φ S 9 / S 3 / S 7 / S 37 (JIC) male flare 444 ash Size Thread Size φ 444 4S 7 / S / S 9 / S 3 / S 7 / S / S / S 5 / S 5 / S 5 / S 7 / S / S 45 male flare 440 ash Size Thread Size φ 440 4S 7 / S 7 / S / S 5 / S 3 / S 7 / S / S / **See page 78 for O-Rings. B dimension is counterbore diameter for mating tubing. vailable in stainless steel. To order drop the S suffix and add 59 prefix. LIFSVR ash Tube Size Size Size B φ S / S 5 / S 5 / S 3 / S 3 / S / S 5 / S / S 3 / S S S / S / S / S S / S / S / S / S S / elbow 9097 Universal swivel 9099 S 45 swivel 9065 S 37 (JIC) swivel ash Size Thread Size φ S 7 / S 7 / S / S 3 / S 3 / S 3 / S 7 / S 7 / S 5 / S / elbow (continued) 9097 Universal swivel 9099 S 45 swivel 9065 S 37 (JIC) swivel ash Size Thread Size φ S 9 / S 9 / S / S 5 / S 5 / S 5 / elbow (short) 9096 Universal swivel 9030 S 45 swivel 906 S 37 (JIC) swivel 90 elbow (long) 9095 Universal swivel 9030 S 45 swivel 9060 S 37 (JIC) swivel ash Size Thread Size φ S 7 / S / S 3 / S 7 / S 3 / S 5 / S / S 9 / S / S 5 / S 5 / S 5 / S 5 / S 5 / S 7 / S / S 3 / S 7 / S 7 / S 5 / S / S 9 / S / S 5 / S 5 / ll dimensions in inches. NOT: For correct socket part number, see page

80 RUSBL 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Code 6 S J58 Straight split flange 4775 Flange ash ead Size ia. Size Ø S S S S S S S S S S S S S S S S S S S S Code 6 S J58 / split flange 4776 Flange ash ead Size ia. Size Ø S S S S.8 0S S Code 6 S J58 30 split flange Flange ash ead Size ia. Size Ø S S S S S S Code 6 S J58 45 split flange 4777 Flange ash ead Size ia. Size Ø S S S S S S S S S S S S S S S Code 6 S J58 60 split flange 9395 Flange ash ead Size ia. Size Ø 9395 S S S S Code 6 S J58 90 split flange 4779 Flange ash ead Size ia. Size Ø S S S S S S S S S S S S S S S R U S B L *ll dimensions in inches. NOT: For flanges, split flange halves, kits and O-Rings see pages NOT: For correct socket part number, see page

81 RUSBL Male inverted flare 9077 ash Size Thread Size Ø S 7 / Male/female inverted flare 9076 ash Size Thread Size Ø S 5 /8-8(M) /6-4(F) Straight S male inverted flare 90 ash Size Thread Size Ø 90 4S 7 / S / S / S 5 / S 5 / S 3 / elbow S male inverted flare ash Size Thread Size Ø S 5 / elbow (short) S male inverted flare elbow (long) S male inverted flare 9035 ash Size Thread Size Ø S 7 / S / S 3 / S / S 5 / S / S 5 / S / S 3 / S 7 / S 3 / S 5 / Female inverted flare 403 R U S B L ash Size Thread Size Ø 403 5S / S 5 / Compression ball sleeve FC703 ash Tube Size Size Size Ø FC / / elbow S male inverted flare 9037 ash Size Thread Size Ø S 7 / S / S 5 / S 3 / S 7 / *ll dimensions in inches. NOT: For correct socket part number, see page

82 RUSBL 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 ORS Swivel Straight FJ9706 ash T Size Thread Size φ FJ S 9 / S 9 / S / S 3 / S S 3 / S 7 / S / S ORS Swivel 45 lbow FJ9707 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S S 3 / S 7 / S / S ORS Swivel 90 lbow short drop FJ9708 ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / S ORS Swivel 90 lbow long drop FJ9709 ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / S BSP 00R5 Style Reusble fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 BSP male ash Size Thread Size φ / / / / / / / BSP female swivel 07.4 ash Size Thread Size φ / / / / / / / / / R U S B L inches in bold type millimeters in light type NOT: For correct socket part number, see page

83 RUSBL R U S B L Metric 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Metric male 60 IN 763/ ash Size Thread Size φ M x M x M x M x M x M x M x M x M x M x M x M x M x Metric male 4 IN 390/390 I.Rh ash Size Thread Size φ Rφ* M x M x M x M x M x M x M x M x M x M x M x M x Metric male 4 IN 390/390 s.rh ash Size Thread Size φ Rφ* M x M x M x M x M x M x M x M x M x Metric universal female swivel 60 IN 763/ / ash Size Thread Size φ M x M x M x M x M x M x M x M x M x M x M x M x M x inches in bold type millimeters in light type *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. NOT: For correct socket part number, see page

84 RUSBL ash Size Thread Size ø Rø Metric 00R5 Style Reusable fittings for use with 30, 303, 503, 540, 580, 65, FC34, FC300, FC3, FC350, FC355, FC558, FC80 Metric universal female swivel 4 IN 390/390 l.rh M x M x M x M x M x M x Metric universal female swivel 4 IN 390/390 s.rh ash Size Thread Size ø Rø M x M x M x M x M x M x M x M x M x ash Size Thread Size ø FC S 040S 05S 06S 06S 44S Komatsu 30 metric female swivel FC5954 M x M x M x M x M x M x M x M x M x M x R U S B L inches in bold type millimeters in light type *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. NOT: For correct socket part number, see page 73. 5

85 RUSBL Bump tube O-Ring seal for use with Refrigeration 540, FC558, FC80 ll dimensions in inches. Male FC7646 /FC7049 Pilot Part Number O.. Length Thread Size ø M Male (short pilot) FC S / FC S / FC S / Male (long pilot) FC S / FC S / FC S / Male 90 elbow (short pilot) FC S / FC766 00S / Male 90 elbow (long pilot) Male 90 elbow FC766 /FC7474 FC S / FC S / NOT: O Rings must be ordered separately. Order by part number 546 for 06 size fittings, for 08 size fittings, for 0 size fittings and for size fittings. See page 78. R U S B L Female FC7048 Female 90 elbow FC7573 Pilot Part Number O.. Length Thread Size ø M Female (long pilot) FC S / FC S / FC S / FC7048 S / Female 90 elbow (long pilot) FC S / FC S / FC S / FC7573 0S / FC7573 S / ll dimensions in inches. NOT: For correct socket part number, see page 73. 5

86 RUSBL Polyon Reusable fittings for use with FC37, FC373 Male pipe FJ50 ash Size Thread Size φ FJ S / S 3 / S / S 37 (JIC) swivel FJ500 ash Size Thread Size φ FJ S 7 / S 9 / S 3 / S / R TTC Reusable fittings for use with FC, G663 Male pipe FC7985 ash T Size Thread Size φ FC S / S / S / S 3 / S 3 / S / S 3 / S - / S 37 (JIC) swivel FC7988 ash T Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / S 37 (JIC) male flare FC7986 ash Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / S male O-Ring boss FC7987 ash T Size Thread Size φ FC S 9 / S 3 / S / S 5 / R U S B L ll dimensions in inches. Note: For correct socket part number, see page 73. S 00R pressures only. 53

87 RUSBL LIFSVR* FC7989 ash Tube Size Size Size B* φ FC S / S 3 / S / S 3 / S * B dimension is counterbore for mating tubing. S 37 (JIC) swivel 45 elbow FC7990 ash Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / S 37 (JIC) swivel 90 elbow (short) FC elbow (long) FC799 Code 6 S J58 Straight split flange FC5075 Flange ash ead Size ia. Size φ FC S S S Note: For flanges, split flange halves, kits and O-Rings, see pages ORS Swivel Straight FJ974 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / ORS Swivel 90 lbow short drop FJ976 T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / ORS Swivel 90 lbow long drop FJ977 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / R U S B L ash Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / FC S 7 / S 5 / S 3 / S 7 / S / S 5 / ORS Swivel 45 lbow FJ975 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / swivel-metric threads special Komatsu FJ799 ash Size Thread Size φ FJ S M4x S M8x S Mx S M4x S M30x S M33x ll dimensions in inches. NOT: For correct socket part number, see page

88 RUSBL for use with FC, G663 (continued) Komatsu split flange FJ77 Flange ash ead Size ia. Size φ FJ77 0S Komatsu split flange 45 elbow FJ7 Flange ash ead Size ia. Size φ FJ7 0S Komatsu split flange 90 elbow FJ73 Flange ash ead Size ia. Size φ FJ73 0S ll dimensions in inches. Komatsu split flange fittings require the use of a special O-Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. i-pac Reusable fittings for use with FC30, FC50 ash Size Thread Size φ FC S / S / S 3 / S / S 3 / S - / *00S /4- / ash Size Thread Size φ FC530 Male pipe FC53 S 37 (JIC) swivel FC S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / *00S 5 / ash Size Thread Size φ FC S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 3 / S 5 / *00S 5 / ash Size Thread Size φ FC S 7 / S / S 5 / *00S 5 / ash Size Thread Size φ FC544 S 37 (JIC) male flare FC533 S male o-ring boss FC5379 S 37 (JIC) swivel 45 elbow FC S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / * 00S 5 / R U S B L *FC30 only NOT: For correct socket part number, see page 73. O-Ring not included. See pages for O-Rings. 55

89 RUSBL S 37 (JIC) swivel 90 elbow (short) FC543 S 37 (JIC) swivel 90 elbow (long) FC54 ash Size Thread Size φ FC S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / *00S 5 / FC S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / *00S 5 / LIFSVR FC5380 Flange ash ead Size ia. Size φ FC S S S S S S *00S Flange ash ead Size ia. Size φ FC536 Code 6 S J58 Straight split flange FC535 Code 6 S J58 / split flange FC S S S S S *00S Flange ash ead Size ia. Size φ FC S S S S S *00S Flange ash ead Size ia. Size φ FC539 Code 6 S J58 45 split flange FC538 Code 6 S J58 60 split flange FC539 S S S S * 00S R U S B L ash Tube Size Size Size B φ FC S / S 3 / S / S 5 / S 3 / S *00S / ll dimensions in inches. B dimension is counterbore diameter for mating tubing. NOT: For correct socket part number, see page 73. Flange ash ead Size ia. Size φ FC537 Code 6 S J58 30 split flange FC537 S S S S *00S Flange ash ead Size ia. Size φ FC540 Code 6 S J58 67 / split flange FC S S S S S *00S *FC30 only NOT: For flanges, split flange halves, kits and O-Rings see pages

90 RUSBL i-pac Reusable fittings for use with FC30, FC50 Code 6 S J58 90 split flange FC54 Flange ash ead Size ia. Size φ FC S S S S S S *00S ORS Swivel Straight FJ978 ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / NOT: For flanges, split flange halves, kits and O-Rings, see pages NOT: For correct socket part number, see page 73. *FC30 only ORS Swivel 45 lbow FJ979 ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / lbow short drop FJ9730 ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / ORS Swivel 90 lbow long drop FJ973 ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / swivel-metric threads special Komatsu FJ70 ash Size Thread Size φ FJ70 004S M4x S M8x S Mx S M4x S M30x S M33x S M36x Komatsu split flange FJ70 Flange ash ead Size ia. Size φ FJ70 00S Komatsu split flange 45 elbow FJ703 Flange ash ead Size ia. Size φ FJ703 00S ll dimensions in inches. Komatsu split flange fittings require the use of a special O- Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. R U S B L 57

91 RUSBL R U S B L Komatsu split flange 90 elbow FJ704 Flange ash ead Size ia. Size φ FJ704 00S Komatsu split flange fittings require the use of a special O-Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. for use with 59, 766, 78, FC95 Male pipe 47 ash Size Thread Size φ 47 00R Skive Style Reusable fittings 4 4S / S 3 / S 3 / S 3 / S / S / S 3 / S - / S - / S /4- / S /- / S - / NOT: For flanges, split flange halves, kits and O-Rings, see pages NOT: For correct socket part number, see page 73. S 00R pressures only. S 37 (JIC) swivel stainless steel S 37 (JIC) swivel ash Size Thread Size φ S 7 / S / S 9 / S 9 / S 3 / S 3 / S 7 / S / S 7 / S / S / S 3 / S 5 / S 5 / S 5 / S 7 / S / / / / / / / / / / S male O-Ring boss ash Size Thread Size φ S 3 / S 7 / S / S / S 3 / S 5 / S 5 / S 7 / S / O-Ring not included. See page 78 for O-Rings. S 37 (JIC) male flare 475 ash Size Thread Size φ S 7 / S / S 9 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S / S / S 3 / S 5 / S 5 / S 5 / S 7 / LIFSVR* 9000 ash Tube Size Size Size B* φ S / S 3 / S / S / S 5 / S 5 / S 3 / S S S / S / S S / S / S / S / S * B dimension is counterbore diameter for mating tubing. lso available with metric and jump size counterbores. ll dimensions in inches. 58

92 RUSBL 00R Skive Style Reusable fittings for use with 59, 766, 78, FC95 S 37 (JIC) swivel 45 elbow 9087 ash Size Thread Size φ S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / S 5 / Code 6 S J58 Straight split flange 4744 Flange ash ead Size ia. Size φ S S S S S S S S S S S S S S Code 6 S J58 30 split flange 9044 Flange ash ead Size ia. Size φ 9044 S S S S S S S S S S S S S ash Size Thread Size φ S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / S 5 / S 37 (JIC) swivel 90 elbow (short) 9064 S 37 (JIC) swivel 90 elbow (long) S 7 / S 9 / S 3 / S 3 / S 7 / S 7 / S / S 5 / S 5 / Code 6 S J58 / split flange 470 Flange ash ead Size ia. Size φ 470 8S S S S S S S S ll dimensions in inches. NOT: For flanges, split flange halves, kits and O-Rings, see pages NOT: For socket part numbers, see page 73. Code 6 S J58 45 split flange 4745 Flange ash ead Size ia. Size φ S S S S S S S S S S S S S S S S S S S S R U S B L 59

93 RUSBL R U S B L Code 6 S J58 67 / split flange 4767 Flange ash ead Size ia. Size φ S S S S S S S S Code 6 S J58 90 split flange 4790 Flange ash ead Size ia. Size φ S S S S S S S S S S S S S S S S S S S S S S S S ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / S ash T Size Thread Size φ FJ9733 ORS Swivel Straight FJ973 ORS Swivel 45 elbow FJ S 9 / S / S 3 / S S 3 / S 7 / S / S ash T Size Thread Size φ FJ S 9 / S / S 3 / S S 3 / S 7 / S / S ash T Size Thread Size φ FJ9735 ORS Swivel 90 elbow short drop FJ9734 ORS Swivel 90 elbow long drop FJ S 9 / S / S 3 / S S 3 / S 7 / S / S ll dimensions in inches. NOT: For flanges, split flange halves, kits and O-Rings, see pages NOT: For socket part numbers, see page

94 RUSBL BSP 00R Skive Style Reusable fittings for use with 59, 766, 78, FC95 BSP male ash Size Thread Size φ / / / / / / / / BSP female swivel ash Size Thread Size φ / / / / (Continued next column) BSP female swivel (continued) ash Size Thread Size φ / / / / / / / Metric male 60 IN 763/ ash Size Thread Size φ Metric 00R Skive Style Reusable fittings for use with 59, 766, 78, FC M x M x M x M x M x M x M x M x M x M x M x Metric male 4 IN 390/390 l.rh ash Size Thread Size φ Rφ* M x M x M x M x M x M x M x M x M x M x Metric male 4 IN 390/390 s.rh ash Size Thread Size φ Rφ* M x M x M x M x M x M x M x M x M x R U S B L inches in bold type millimeters in light type *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. NOT: For correct socket part number, see page 73. 6

95 RUSBL Metric universal female swivel 60 IN 763/ / ash Size Thread Size φ M x M x M x M x M x M x M x M x M x M x M x M x Metric universal female swivel 4 IN 390/390 s.rh ash Size Thread Size φ Rφ* M x M x M x M x M x M x M x M x M x M x Komatsu split flange FJ9066 ash Flange Size ead ia. Size φ FJ S Komatsu split flange 45 elbow FJ9065 ash Flange Size ead ia. Size φ FJ S Komatsu split flange 90 elbow FJ9064 ash Flange Size ead ia. Size φ FJ S Metric universal female swivel 4 IN 390/390 l.rh R U S B L ash Size Thread Size φ Rφ* M x M x M x M x M x M x M x M x M x M x M x inches in bold type millimeters in light type 30 swivel metric threads special Komatsu FC543 ash Size Thread Size φ FC S M4 x S M8 x S M x S M4 x S M30 x S M33 x S M36 x S M4 x *Rφ dimension is tube O.. and refers to mating component when not called out on the illustration. Komatsu split flange fittings require the use of a special O- Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. Consult eroquip catalogs for part numbers and dimensions. ll dimensions in inches. NOT: For socket part numbers, see page 73. 6

96 RUSBL for use with FC, G793 Male pipe FC5985 ash Size Thread Size φ FC S / S 3 / S 3 / S / S 3 / S - / S 37 (JIC) swivel FC5988 ash Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / S 37 (JIC) male flare FC5986 ash Size Thread Size φ FC R TTC Reusable fittings 0404S 7 / S 9 / S 3 / S / S 5 / S male O-Ring boss** FC5987 ash Size Thread Size φ FC S 9 / S 3 / S 3 / S / S 5 / LIFSVR* FC5989 ash Tube Size Size Size B* φ FC S / S 3 / S / S 3 / S lso available with metric and jump size counterbores. S 37 (JIC) swivel 45 elbow FC5990 ash Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / S 37 (JIC) swivel 90 elbow (short) FC599 S 37 (JIC) swivel 90 elbow (long) FC599 ash Size Thread Size φ FC S 7 / S 9 / S 3 / S / S 5 / FC S 7 / S 9 / S 3 / S / S 5 / Code 6 S J58 Straight split flange FC5993 Flange ash ead Size ia. Size φ FC S S S R U S B L NOT: For correct socket part number, see page 73. ll dimensions in inches. S 00R pressures only. *B dimension is counterbore diameter for mating tubing. **See page 78 for O-Rings. NOT: For flanges, split flange halves, kits and O-Rings, see pages

97 RUSBL ORS Swivel Straight FJ7344 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / ORS Swivel 45 elbow FJ7345 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / ORS Swivel 90 elbow long drop FJ7347 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / swivel-metric threads special Komatsu FJ700 ash Size Thread Size φ FJ S M4x S M8x S Mx S M4x S M30x S M33x Komatsu split flange 45 elbow FJ78 Flange ash ead Size ia. Size φ FJ78 0S Komatsu split flange 90 elbow FJ79 Flange ash ead Size ia. Size φ FJ79 0S Komatsu split flange fittings require the use of a special O- Ring. Standard eroquip code 6 split flange fittings will work on Komatsu equipment with Komatsu flanges and bolts and standard eroquip O-Rings. ORS Swivel 90 elbow short drop FJ7346 R U S B L ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / S 7 / Komatsu split flange FJ7 Flange ash ead Size ia. Size φ FJ7 0S ll dimensions in inches. NOT: For socket part number, see page

98 RUSBL for use with FC36, FC34 ( 08), G493, FC736 ash Size Thread Size φ S / S 3 / S 3 / S / S 3 / S - / FC7640 ash Size Thread Size φ S 9 / S 3 / S 3 / S 7 / S / S 5 / FC7639 Spiral Skive Style Reusable fittings Male pipe /FC S /4- / S /- / S 37 (JIC) swivel /FC S 5 / S 7 / ash Size Thread Size φ S 3 / S 7 / S / S 5 / FC S 5 / S 7 / ash Size Thread Size φ FC S 3 / S / S 5 / FC5979 S 37 (JIC) male flare 9099 /FC7740 S 37 (JIC) swivel / elbow FC5978 /FC S 5 / S 7 / ash Size Thread Size φ FC S 3 / S / S 5 / FC598 ash Size Thread Size φ FC S 3 / S / S 5 / FC S 5 / S 7 / ash Size Thread Size φ FC S 3 / S / S 5 / FJ904 S 37 (JIC) swivel 30 elbow FC5980 /FC598 00S 5 / S 7 / S 37 (JIC) swivel 45 elbow FC598 /FC5983 S 37 (JIC) swivel 60 elbow FC5984 /FJ904 00S 5 / S 7 / R U S B L ll dimensions in inches. NOT: For socket part numbers, see page

99 RUSBL R U S B L ash Size Thread Size φ FJ S 3 / S / S 5 / FJ906 ash Size Thread Size φ FJ S 3 / S / S 5 / FJ908 S 37 (JIC) swivel 67 / elbow FJ905 /FJ906 00S 5 / S 7 / S 37 (JIC) swivel 90 elbow FJ907 /FJ908 00S 5 / S 7 / Straight split flange /FC773 Code 6 S J58 FC7370 /FC5973 Code 6 S J58 Flange ash ead Size ia. Size φ Code 6 (S J58) 8S S S S S S (Continued next column) NOT: For socket part numbers, see page 73. Straight split flange (continued) /FC773 Code 6 S J58 FC7370 /FC5973 Code 6 S J58 Flange ash ead Size ia. Size φ FC773 00S S S S FC7370 Code 6 (S J58) 08S S S S S FC S S S S / split flange FC9634 /FC774 Code 6 S J58 FC7983 /FC5974 Code 6 S J58 Flange ash ead Size ia. Size φ FC9634 Code 6 (S J58) 0808S S S S S S FC774 00S S S S FC7983 Code 6 (S J58) 08S S S S S FC S S S S NOT: For flanges, split flange halves, kits and O Rings, see pages split flange FC9459 /FC7790 Code 6 S J58 FC737 /FC5975 Code 6 S J58 Flange ash ead Size ia. Size ø FC9459 Code 6 (S J58) 0808S S S S S S FC S S S S FC737 Code 6 (S J58) 08S S S S S FC S S S S NOT: For correct socket part number, see page 7. NOT: For flanges, split flange halves, kits and O Rings, see pages ll dimensions in inches. 66

100 RUSBL Spiral Skive Style Reusable fittings for use with FC36, G493, FC736, FC34 (-08) 45 split flange /FC775 Code 6 S J58 FC737 /FC5976 Code 6 S J58 Flange ash ead Size ia. Size ø Code 6 (S J58) 8S S S S S S FC775 60S S S S S FC737 Code 6 (S J58) 0808S S S S S S FC S S S S split flange FC9066 /FC5060 Code 6 S J58 FC7373 /FC5977 Code 6 S J58 Flange ash ead Size ia. Size ø FC9066 Code 6 (S J58) 0808S S S S S S (Continued next column) 60 split flange (continued) Flange ash ead Size ia. Size ø FC S S S S S FC7373 Code 6 (S J58) 08S S S S S FC S S S S / split flange FC98 /FC78 Code 6 S J58 FC7984 /FJ9034 Code 6 S J58 Flange ash ead Size ia. Size ø FC98 Code 6 (S J58) 0808S S S S S S FC78 00S S S S FC7984 Code 6 (S J58) 08S S S S S FC S S S S split flange /FC7703 Code 6 S J58 FC7374 /FJ9033 Code 6 S J58 Flange ash ead Size ia. Size ø Code 6 (S J58) 8S S S S S S S S FC S S S S FC7374 Code 6 (S J58) 0808S S S S S S FJ S S S S R U S B L NOT: For correct socket part number, see page 73. NOT: For flanges, split flange halves, kits and O Rings, see pages ll dimensions in inches. 67

101 RUSBL ORS Swivel Straight FJ9740 /FJ9744 ash T Size Thread Size ø FJ S / S 3 / S 3 / S 7 / FJ S / S ORS Swivel 45 elbow FJ974 /FJ9745 ash T Size Thread Size ø FJ S 3 / S 3 / S 7 / FJ S / ORS Swivel 90 elbow short drop FJ974 /FJ9746 ash T Size Thread Size ø FJ S 3 / S 3 / S 7 / FJ S / S ORS Swivel 90 elbow long drop FJ9743 /FJ9747 ash T Size Thread Size ø FJ S 3 / S 3 / S 7 / FJ S / S Komatsu 30 Swivel-Metric Threads FJ786 ash Size Thread Size φ FJ S M x S M4 x S M30 x S M33 x SOCKTLSS for use with 556, 565, 575, FC33, FC647 Male pipe 4738 ash Size Thread Size φ B / B / B / B 3 / B 3 / B / B / B 3 / R U S B L ll dimensions in inches. NOT: For correct socket part number, see page

102 RUSBL Male pipe swivel FJ9068 /FJ9486 **Uses Neoprene O-Ring ash Size Thread Size φ FJ S / S 3 / S / FJ B / **Use only with petroleum and waterglycol fluids. Female pipe 4753 ash Size Thread Size φ B / B 3 / B / ash Size Thread Size φ B 7 / B / B 3 / B 3 / B 7 / B 7 / B* 5 / B* / Universal 4739 S 45 * 474 S 37 (JIC) 3 4B 3 / B 9 / B / B 9 / B / S 45 male flare 474 ash Size Thread Size φ 474 4B 7 / B / B 5 / B 3 / S 45 inverted male flare 4740 ash Size Thread Size φ B 3 / B 7 / B / B 5 / B 3 / B 7 / Female NPSM swivel FC5853 ash Size Thread Size φ FC S / S 3 / S / S / S 3 / S 37 (JIC) Male flare 9067 ash Size Thread Size φ B 7 / B 9 / S 4 inverted female flare 4743 ash Size Thread Size φ B 3 / B 7 / B / B 5 / B 3 / R U S B L ll dimensions in inches. ouble notch in nut for Universal type identification for both S 45 and 37 (JIC) connections. *Single notch in nut for S 45 identification. 69

103 RUSBL mender 477 ash Size Size φ 477 4B B B B B Compression type 4750 ash Tube Size Size Size φ B B B B B B elbow (short) 9038 S 45 swivel* 93 Universal swivel 9056 S 37 (JIC) swivel 90 elbow (long) S 37 (JIC) swivel FC585 Universal swivel ash Size Thread Size φ S* 5 / S 7 / S 3 / S 3 / S 9 / S 9 / FC S 7 / S male inverted flare 45 elbow ash Size Thread Size φ S 7 / S 5 / ash Thread Size T Size φ FJ S 9 / S / S 3 / S 3 / ash Thread Size T Size φ FJ703 ORS Swivel Straight FJ7044 ORS Swivel 45 elbow FJ S 9 / S / S 3 / S 3 / R U S B L 45 elbow FC5848 S 45 swivel* FC5847 S 37 (JIC) swivel FC5849 Universal swivel ash Size Thread Size φ FC S* 5 / FC S 9 / FC S 7 / S 3 / S male inverted flare 90 elbow (short) 9037 S male inverted flare 90 elbow (long) 9036 ash Size Thread Size φ S 7 / S 5 / S 3 / S 3 / S 5 / ORS Swivel 90 elbow FJ7358 ash T Size Thread Size φ FJ S 9 / S / S 3 / S 3 / ll dimensions in inches. ouble notch in nut for Universal type identification for both S 45 and 37 (JIC) connections. *Single notch in nut for S 45 identification. 70

104 RUSBL BSP SOCKTLSS for use with 556, 565, 575, FC33, FC647 BSP male 07. ash Size Thread Size φ / / / / / BSP Female swivel ash Size Thread Size φ / / / / / for use with 556, 565, 575, FC33, FC647 ash Size Thread Size φ M x M x M x M x M x M x M x ash Size Thread Size φ Rφ Metric SOCKTLSS Metric male 60 IN 763/ Metric male 4 IN 390/390 I. Rh M x M x M x M x M x M x M x Metric universal female swivel 60 IN 763/ /07.00 /07.4 ash Size Thread Size φ M x M x M x M x M x M x M x ash Size Thread Size φ Rφ Metric universal female swivel 4 IN 390/390 I.Rh /07.00 M x M x M x M x M x M x M x Inches in bold type. Millimeters in light type. Material for BSP and Metric fittings is steel. *Rφ is tube O.. and refers to mating component when not called out on the illustration. *Rφ is tube O.. and refers to mating component when not called out on the illustration. Material for BSP and Metric fittings is steel. Inches in bold type. Millimeters in light type. 7

105 RUSBL Power Steering & ir Brake Reusable fittings for use with 550, 554, 555, 570 ash Size Thread Size φ S / S / S 3 / S / S / ash Size Thread Size φ Male pipe S 37 (JIC) swivel S 7 / S / S 9 / ash Size Thread Size φ S 7 / S 5 / ash Size Thread Size φ Male inverted flare Male inverted flare 45 elbow 4 6S 7 / S 5 / S 45 swivel 45 elbow ash Size Thread Size φ S 7 / S 5 / S 45 swivel 90 elbow ash Size Thread Size φ S 7 / S 5 / R U S B L S 37 (JIC) male flare FC775 ash Size Thread Size φ FC S 9 / USF swivel ash Size Thread Size φ S 3 / ash Size Thread Size φ S 7 / S / S 5 / ash Size Thread Size φ Male inverted flare 90 elbow S 45 swivel S 7 / S 5 / S male flareless with nut and ferrule ash Size Thread Size φ S 7 / S 9 / ll dimensions in inches. NOT: For correct socket part number, see page 73. 7

106 RUSBL for use with 550, 554, 570 Union Part number S 3 /4-0 USF to /4-inch male pipe thread Part number S 3 /4-0 USF to 3 /8-inch male pipe thread Gladhand Part number /-inch female pipe thread Spring Guard Part number Fittings specified in charts can be used with or without spring guard for use with FC5, FC35 ccessories Band clamp Band clamp and nipples for use with 66, FC38, FC69 Band clamp FF905 ash Size FF905 Size Bolt Swivel Flange for use with 53, 53 Male Pipe 458 ash Size Thread Size φ 458 Railroad ir Brake Reusable fittings 8 0S / S 3 / S 3 / S - / S - / S - / S /4- / Railroad air brake flange fittings Nipple Socket Part Number Part Number Size ø FJ4649-6S 9-6S FJ S 9-0S FJ S 9-4S *Contact aton eroquip for Flange Part Number. 45 lbow Bolt Swivel Flange Silicone hose clamp FF948 Use with Use with ash FC5 FC35 Size ash Size ash Size FF948 08, 0 08, 0 6, , 8, 0, 3 4, 6, , 36, , ll dimensions in inches. Nipple Socket Part Number Part Number Size ø FJ S 9-0S FJ S 9-4S *Contact aton eroquip for Flange Part Number. 90 lbow Bolt Swivel Flange Nipple Socket Part Number Part Number Size ø FJ4650-6S 9-6S FJ S 9-0S FJ S 9-4S *Contact aton eroquip for Flange Part Number. R U S B L 73

107 RUSBL for use with PTF 807, FC86, FC465 Male Pipe ash Size Thread Size φ fittings 4 / / / / / / / / / /4- / for use with 807, FC86, FC465 S 45 swivel ash Size Thread Size φ / / / / / / elbow Universal FC934 S 45 swivel fittings 9077 Universal FC97 S 45 swivel ash Size Thread Size φ S 3 / S 7 / S / S 9 / S 3 / S 7 / S 7 / S / S / S 5 / FC S 5 / S / R U S B L S 37 (JIC) swivel ash Size Thread Size φ * 7 / * / * 9 / * 3 / * 7 / * / * 5 / * 5 / ash Size Thread size φ 3S 3 / S 7 / S / S 9 / S 3 / S 7 / S / S 5 / S 5 / FC S 5 / S / *lso supplied in stainless steel. dd suffix C to part number and delete prefix 63. S 37 (JIC) swivel only Universal type identification for both S 45 and 37 connections. NOT: Sleeve part number (size). NOT: For correct socket part number, see page

108 RUSBL -bolt swivel flange Flange ash ead Size ia. Size φ Compression ball sleeve ash Tube Size Size Size φ S ball sleeve* 9078 ash Size Thread Size φ S / S 3 / S 3 / S NOT: For correct socket part number, see page 73. *Some B-W compressor adapters require special mating nuts. For 3 /6 8 thread size for / O.. Tubing, using fitting S with For special thread size 7 /8 8, use fitting S with NOT: Sleeve part number is (size) ll dimensions in inches. Special ball sleeve* 9074 ash Size Thread Size φ S 7 / S male inverted flare Straight FC906 ash Size Thread Size φ FC S 7 / S / S / S 5 / S 3 / S 7 / S / S male inverted flare 45 elbow FC9063 ash Size Thread Size φ FC S / S / S 5 / S 3 / S 7 / S / S male inverted flare 90 elbow ash Size Thread Size φ S 7 / S / S / S 5 / S 3 / S 7 / S / NOT: Sleeve part number is (size) for use with PTF 808 Male pipe ash Size Thread Size φ / / / / /4- / /- / S 37 (JIC) swivel ash Size Thread Size φ fittings 8 3 / / / / / / R U S B L NOT: Sleeve part number is (size). 75

109 SPLIT FLNGS, KITS & O-RINGS Split flanges eroquip has standard pressure series (code 6) and high pressure series (code 6) split flange components in kit form that save time in selecting and ordering. ach kit includes two flange halves, 4 grade 8 hex bolts, 4 lock washers and an O-Ring. The standard kit has a Buna-N 90 durometer O-Ring that is compatible with petroleum and water base hydraulic fluids. Optional kits contain PR and Viton* O-Rings for applications where fluid compatibility or high temperatures require other than Buna-N O-Rings. K Maximum Flange ead Flange Operating Recommended imension iameter ash Pressure* Bolt Torque (inches) (inches) Size (PSI) (lb-in.) Code Code *Per S J58 standard. Two methods can be used to determine the flange dash size and code. The first is by measuring the flange head diameter on the fitting itself (the K dimension). The second is by measuring the dimension on the flange or the flange port. ither will determine the dash size and the code since these dimensions are exclusive to either code 6 or code 6 split flange kits. See chart for these dimensions. In some cases, split flange fittings are available for hoses which exceed the pressures listed; when ordering fittings or hose assemblies, the terminal end performance rating may reduce the overall rating of the assembly. *Viton is a upont trademark. ssembly procedure Many leakage problems can be avoided if the split flanges are properly assembled. To properly assemble:. Clean all mating surfaces.. Lubricate the O-Ring. 3. Partially tighten each bolt in rotation until all are fully tightened to the recommended torque value. ow to Order:. etermine the dash size and the code.. Select O-Ring for fluid compatibility. 3. Order by kit number shown on page

110 SPLIT FLNGS, KITS, O-RINGS Split Flange alf S J58 Code Zinc plated yellow, chromate finish standard series required Split Flange alf S J58 Code 6 FC345 Zinc plated yellow, chromate finish, high pressure 6000 psi series required Split Flange alf quivalent performance to S J58 Code 6 FC73 Powdered metal, zinc plated yellow chromate finish required ll dimensions in inches. Flange Nominal Flange ash Flange ead Part Number Size Size ia. ø G / / / / / FC / FC FC / FC / FC FC FC / FC / Kit Number FF593 (size) Includes: Flange halves ( ) 4 Grade 8 ex bolts (FF944) 4 Lock Washers (004) Buna-N O-Ring (FF9446) (Viton* kit part number, FF687 size) (PM kit part number, FF688 size) FF595 (size) Includes: Flange halves (FC345) 4 Grade 8 ex bolts (FF944) 4 Lock Washers (004) Buna-N O-Ring (FF9446) (Viton* kit part number, FF689 size) FF84 (size) Includes: Flange halves (FC73) 4 Grade 8 ex bolts (FF944) 4 Lock Washers (004) Buna-N O-Ring (FF9446) 4 ole Flange S J58 Code 6 FC / /8-6 FC /8-6 FC / /6 4 FC /.75.4 /-3 FC9 Zinc plated, yellow chromate finish standard series vailable without threaded holes, as part number FC3459-size-449. FC /-3 FC / /-3 *Viton is a upont trademark. 77

111 O-RINGS O-Rings for S J58 Split Flange Cat Flange -Ring* O-Rings for Stāplok Fittings O-Ring Base Operating Number Material Temperature Range FF durometer 65 F to +300 F PM ( 55 C to +50 C) FF durometer 40 F to +50 F (Standard) Buna-N ( 40 C to + C) durometer 5 F to +400 F Viton ( 5 C to +05 C) Part B C Number Ref Ref Ref Ref Ref FF FF FF FF FF Temperature range: -40 F to + F. Material: Nitrile (Buna-N) *To be used only with Cat flange. O-Ring Base Operating Number Material Temperature Range FF durometer 40 F to +50 F (Standard) Buna-N ( 40 C to + C) Flange Nominal O-Ring ash ash Flange Size esignation Size Size 0 08 / / / / / O-Rings for Bump Tube O-Ring Seal and O-Ring Pilot Fittings 546 Material: Chloroprene (Neoprene) urometer: 7 Temperature Range: 65 F to +300 F O-Rings Seal Kit O-Ring O-Ring Part Pilot Number ash Size Part No. FF080-0 Includes metal box, O-Rings for ORS 4 through 4, O-Ring boss 04 through 3, Split flange 08 through 3, 4 packages with twelve 90 durometer nitrile O-Rings per package. Packages can be ordered individually by part number listed. Stāplok O-Ring ash ash Size esignation Size Backup Rings and Staples for Stāplok Fittings FF9509 FF967 Stāplok Backup Ring Staple Fitting Size Part Number Part Number Size 04 FF FF967 04S FF FF967 06S FF FF967 08S 08 FF9509 FF967 S 6 FF FF967 6S 6 0 FF FF967 0S 0 3 FF FF967 3S 3 O-Ring Individual Connection Package O-Ring Size Part Number Part Number 04 FF066 0 FF9446 ORS* O-Ring Boss Split Flange 06 FF066 0 FF FF FF FF FF FF FF FF066 0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF066 0 FF FF FF FF FF *For ORS O-Ring Kit order part number: FF065-0, only includes ORS O-Rings. 78

112 O-RINGS esignating Separate S Boss O-Rings To order eroquip O-Rings separately without fittings specify the size and material by using the O-Ring base number and dash size. The charts below offer a simple method to assure the correct O-Ring for your application. O-Ring Base Operating Number Material Temperature Range urometer 30 F to +50 F (Standard) Buna N ( 34 C to + C) Nitrile Rubber 033 PR 65 F to + F thylene Propylene ( 55 C to +00 C) Rubber 068 Viton* 5 F to +400 F Fluoroelastomer ( 5 C to +05 C) 0 Buna N, Low 65 F to +5 F Temperature ( 55 C to +07 C) Nitrile Rubber O-Ring ash Size Tube Size ( /4) ( 3 /8) ( /) ( 5 /8) ( 3 /4) () ( /4) ( /).70.8 esignating Separate ORS O-Rings To order eroquip O-Rings separately without fittings specify the size and material by using the O-Ring designator and O-Ring base number. The charts below offer a simple method to assure the correct O-Ring for your application. ORS O-Ring Base Operating Number Material Temperature Range FF urometer 40 F to +50 F (Standard) Buna N ( 40 C to + C) Nitrile Rubber FF9807 PR 65 F to +300 F thylene Propylene ( 55 C to +50 C) Rubber 046 Viton* 5 F to +400 F Fluoroelastomer ( 5 C to +05 C) FF9855 Buna N, Low 65 F to +5 F Temperature ( 55 C to +07 C) Nitrile Rubber 546 Neoprene 65 F to +300 F ( 55 C to +50 C) O-Ring ORS Size esignation Tube Size *Viton is a upont trademark. 79

113 80 RTURN TO CONTNTS PG