LifeSense Hose. Part Number Nomenclature EC ft EC Cut Length Hose. Base Hose Number. Hose Size. Bulk Hose. Hose Length.
|
|
|
- Leslie Fleming
- 6 years ago
- Views:
Transcription
1 LIFESENSE WIRE LifeSense Hose Part Number Nomenclature Base Hose Number/Hose Type Hose size (in 16ths of an inch) Base Hose Number The base hose number is simply the type of LifeSense hose you wish to order. Hose Size These are the one or two digits after the base hose number. The hose size code follows industry standards and is the inner diameter of the hose in sixteenths of an inch. Metric equivalents are found within the hose specification charts. Hose Size Hose I.. in 1/16 Inch -02 1/8-03 3/ /4-05 5/ /8-08 1/ / / EC502-8 Hose Length The hose length is indicated in feet. Metric equivalents are found in the length section of the hose specification charts. Cut Length Hose Cut lengths of hose should be ordered as shown by specifying lengths in inches. For numeric part numbers: EC Hose type Hose size (in 16ths of an inch) Cut length (in inches) First four digits are in inches and the last digit is in 8ths of an inch: = 4 ft ½ inches NOTE: Length tolerance for hose, assemblies and sleeves is: Up to and including 12 inches: ± 1 /8 Above 12 inches to and including 18 inches: ± 3 /16 Above 18 inches to and including 36 inches: ± 1 /4 Above 36 inches: ±1% of length Bulk Hose Bulk hose should be ordered by specifying length in feet as shown below. Complete number 500 ft EC502-8 Quantity (in feet) Hose type Hose size (in 16ths of an inch) Packaging Examples of Lifesense packaging codes are provided in the chart below along with a description of the hose length and package configurations. Example P/Ns Length and Package Options Bulk hose - total order quantity shipped will be ± 15% of the original quantity ordered. Balance EC of open quantity will be canceled as the order will be considered shipped complete. Minimum order quantity is 30 feet. Standard Eaton cut length part number structure. Example: = 600 inches; last digit is EC /8 of an inch. ATA / FAQs B - 6
2 LifeSense Common Components LifeSense EC502 Two-Wire Braid Hydraulic Rubber Hose Meets and Exceeds 2SN, EN853 Requirements Part Number Hose Size Hose I.. Hose O.. Max. Operating Pressure Burst Pressure r Min. Bend Radius Weight Length* N mm in mm in bar psi mm in mm in kg/m lbs/ft m ft EC , , , , , , Bulk Bulk EC , , , , , , Bulk Bulk EC , , , , , , Bulk Bulk *4:1 burst to working pressure safety factor For fluid compatibility information refer to the Aeroguip or Weatherhead master catalogs Tube: Synthetic rubber Reinforcement: Two-wire braid Cover: Synthetic rubber Operating Temperature Range Temperature Range -40 C to +100 C (-40 F to +212 F) Application General hydraulics Agricultural equipment turf care Vocational fleets mobile refuse, mobile cement mixers Manufacturing stationary machining centers Features iagnostic unit monitors hose condition in real time etects failure-related events within a hose Provides advance notification the hose is approaching the end of its useful life LIFESENSE WIRE Safety barriers LifeSense Non-Skive Fittings Female JIC/SAE 37 Swivel (FJ) Fittings for use with hose: EC502 Laboratory test stands dynamometers, impulse cycle machines A 2 EØ 1 Part Number Terminal End Thread Hose Size A Cut Off Factor E Ø ash Size N ash Size mm in mm in mm in in in 3LA8FJ8B -08 3/ , , , /16 7/8 3LA12FJ12B / , , , /8 1 1/4 3LA16FJ16B / , , , /8 1 1/2 ATA / FAQs B - 7
3 LifeSense Common Components LifeSense Non-Skive Fittings Female ORS Swivel Straight (FR) Fittings for use with hose: EC502 A EØ Part Number Terminal End Thread Hose Size A Cut Off Factor E Ø LIFESENSE WIRE ash Size N ash Size mm in mm in mm in in in 3LA8FR8B -08 3/ , , , /16 15/16 3LA12FR12B / , , , /8 1 3/8 3LA16FR16B / , , , /8 1 3/8 Female ORS Swivel 45 Elbow (FRA) Fittings for use with hose: EC502 A EØ H Part Number Terminal End Thread Hose Size A Cut Off Factor E Ø H ATA / FAQs ash Size N ash Size mm in mm in mm in mm in 3LA8FRA8B / , , , , LA12FRA12B / , , , , LA16FRA16B / , , , , in 15/ /16 1 5/8 B - 8
4 LifeSense Common Components Female ORS Swivel 90 Short rop Elbow (FRB) Fittings for use with hose: EC502 H A EØ Part Number Terminal End Thread Hose Size A Cut Off Factor E Ø H ash Size N ash Size mm in mm in mm in mm in 3LA8FRB8B / , , , , LA12FRB12B / , , , , LA16FRB16B / , , , , Female ORS Swivel 90 Long rop Elbow (FRC) Fittings for use with hose: EC502 in 15/16 1 3/8 1 5/8 LIFESENSE WIRE H A EØ Part Number Terminal End Thread Hose Size A Cut Off Factor E Ø H ash Size N ash Size mm in mm in mm in mm in 3LA8FRC8B / , , , , LA12FRC12B / , , , , LA16FRC16B / , , , , ATA / FAQs in 15/16 1 3/8 1 5/8 B - 9
5 LifeSense Common Components Protective Sleeve - Heat Shrink Tubing LIFESENSE WIRE Part Number Color I.. Before Shrinking Cut Length Wall Thickness* mm in mm in mm in Shrink Ratio Shrink Temperature Operating Temperature FF91117PS Black 27, , , : to to +230 FF91117PS Black 38, , , : to to +230 FF91117PS Black 50, , , : to to +230 *After shrinking Used on non-sensored end of a LifeSense hose assembly Black Polyolefin Features Moisture-seal adhesive lined Abrasion resistant 1.2 m (48 in) length for cutting ATA / FAQs B - 10
6 LifeSense Wired Electronic Components Hose iagnostic Unit (HU) Part Number Weight imensions IP Rating Vibration g oz FF , Length mm[in] 5.24 [133.03] Width mm[in] 4.68 [118.80] Height mm[in] 1.42 [36.00] Shock/Current Rating Operating Temperature Electrical Supply Gr ms Gr ms ma C F VC IP * to to to 24 Each HC comes with a ten-foot power harness. *In cab profile Housing Clear Ultem material Board size 3.25" x 4" Power Harness SXL SAE J128 ATM two-amp fuse 18 gauge wire eutsche Connector 12 pin TM06-12S Contacts molded-in nickel mating side, tin plated PCB side LIFESENSE WIRE Cable Assembly Part Number Length Weight Nominal O.. Gauge Conductor Temperature Rating FF91117CA-010 3, FF91117CA-025 7, FF91117CA , FF91117CA , m ft kg/m lbs/ft mm in C F 0, ,06 x 6, x /2-40 to to +212 *18/2 gauge GPT SAE J1128 eutsch wedge eutsch female connector eutsch pins stainless steel eutsch socket stainless steel ATA / FAQs Features Flat, jacketed PVC Tough grey cover over plastic insulated wires Resistant to oil, grease, acid and gasoline B - 11
7 LifeSense Wired Electronic Components Sensor Assembly LIFESENSE WIRE Sensor Type 1 (-8 and -12) Sensor Type 2 (-16) Part Number Hose Size Sensor IP Rating Vibration Operating Temperature FF91117SP FF91117SP FF91117SP Each sensor comes with a pre-cut length of protective sleeve. *Chassis profile Type Grms C F IP67 and IP69K 5.82* -40 to to +185 Housing Nylon 6-6 Gasket Santoprene Hardware Stainless steel Protective Sleeve Material Polyolefin ATA / FAQs B - 12
8 LifeSense Wireless Electronic Components Wireless Gateway/Hose iagnostic Unit (HU) LIFESENSE WIRE ATA / FAQs Part Number Weight imensions IP Rating Vibration Shock FF Operating Temperature Electrical Supply WIFI Antenna Sensor Antenna g Lbs Length Width Height Gr ms Gr ms ma C F VPC GHz MHz 9.40" (238.8 mm) 4.85" (123.2 mm) 1.38" (35.1 mm) IP5x 2.88* to +75 *In cab profile Each wireless gateway/hu comes with power cable, WIFI antenna, sensor antenna and two sensor switch activators or "key fobs". Features Housing Nylon 6-6 Antenna adapters solid brass LE lights tubes provided visual alerts Visual alerts provided for power, sensor connection, battery, hose and communication status. Internet connection via Ethernet or WIFI -40 to to B - 13
9 LifeSense Wireless Electronic Components Sensor Assembly Sensor Type 2 (-16) LIFESENSE WIRE Sensor Type 1 (-8 and -12) Part Number Hose Size Sensor IP Rating Vibration Operating Temperature FF92117SP FF92117SP FF92117SP Each sensor comes with a pre-cut length of protective sleeve. *Chassis profile Sensor housing Nylon 6-6 Gasket Santoprene Hardware Stainless steel Protective Sleeve Material Polyolefin Type Grms C F IP67 and IP69K 5.82* -40 to to +185 Features LE on sensor issues visual status (or magnet event) slow flash = sensor connection alert fast flash = hose alert Lithium battery, six-year average life Unique sensor I laser engraved on housing ATA / FAQs B - 14
10 LifeSense Wireless Electronic Components Programming Cable POWER CONNECTOR SETUP CABLE POWER COR GATEWAY CONNECTOR CABLE 1 CABLE 2 PC CONNECTOR Part Number Cable 1 Length Cable 2 Length Cable 1 Wire Gauge Cable 2 Wire Gauge B9 Connector mm in mm in FF92117C , , Female Solder Cup (Tin) At least one programming cable is required to configure a wireless LifeSense system. ATA / FAQs LIFESENSE WIRE B - 15
Eaton LifeSense Wired System Quick Setup Guide
Eaton LifeSense Wired System Quick Setup Guide LifeSense Wired System Quick Setup Guide Each LifeSense kit contains: LifeSense hose assembly (at least one and up to 11) o Sensor assembly (one per hose
451TC/ST, 451TC Twin Tough
Hydraulic Hose: 451T/ST onstant : 3000 PSI atalog 4400 US HYRULI 451T/ST, 451T Twin Tough Parker 451T and 451ST hydraulic hoses are what to specify when abrasion resistance and ease of use are required.
HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
FLEET ESSENTIALS QUICK REFERENCE GUIDE Fax Burke Street, Santa Fe Springs, CA 90670
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE FLEET ESSENTIALS QUICK REFERENCE GUIDE For new and innovative products, visit www.phillipsind.com (B-FE-ENG) 9-26-16 12070 Burke Street, Santa Fe Springs, CA 90670
Connection 1 Connection 2 ft m in mm psi bar in mm
RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability, and safe performance at an economical price.. Constructed with four spiral layers of high tensile
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
4S/6S Eaton s high performance spiral hose fitting design with DURA-SEAL technology
eroquip / Spiral ose Fittings / aton s high performance spiral hose fitting design with UR-SL technology Class 0 Cool-own leakage Superior corrosion resistance ose/fitting identification program aton's
Flexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
Max. Operating Pressure. Inside Diameter. ft m in mm psi bar in mm
4, PSI HOSES Product Description. General purpose hoses are used to distribute high pressure water throughout the system.. Safety whips are six foot hoses that are connected between a waterblast control
EXHAUST / DEF. > Differential Pressure Sensor Tubing 4040T...Silicone tubing, unreinforced...92
EXHAUST / EXHAUST / > Diesel emissions fluid () for SCR systems 4202...Heated line for injection / return...78 4217IS...Bulk length transfer and tank filler / vent...78 4256PC...Formed tank filler / vent
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
Eaton EC inch 6-spiral hose
Eaton EC466-40 2.5 inch 6-spiral hose Eaton s EC466-40 powers the most demanding application Eaton s EC466-40 2.5 inch high pressure 6-spiral hose combined with the 1W series fitting, which incorporates
-06 2, , , , , , , , ,780 SAE 100R16 Type S -08 4, , ,390
Series 2SC-XD -04 6,530 2SC-XD / 2 SNK -06 5,585 Type 1SN -04 3,045 DIN EN 853 1SN -06 2,610-08 2,320-12 1,525-16 1,275 Braided 1-Wire 1SN is an Upgrade from SAE 100R1T Braided 2-Wire Extreme Flex - 1
Eaton Weatherhead Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton Weatherhead Core Hydraulic Hose Products Brochure Success made simple. The new standard for hydraulic hose and fittings. Sometimes less is more. Focused products, smarter choices. Eaton is taking
Hydraulic Twin Tough 711 A TC A ST A TC A-14. 4,000 psi Constant W.P. 772TC A ST A A TC A-16
Constant Hydraulic Industry Standard Suction and Return Push-Lok Phosphate Ester Low Temperature Transportation lternative/marine Fuel Refrigerant Hose Hose visual index Constant Hose 451TC -10 451ST -10
100R5. Features 100R5-style crimp fittings from Eaton complement the company s industryrecognized, reusable fitting line.
E R O Q U I P I N N O V T I O N S 100R5 CRIMP FITTINGS Features 100R5-style crimp fittings from Eaton complement the company s industryrecognized, reusable fitting line. eroquip 100R5 fittings are a low-cost,
Good for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
CONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
Loom & Tubing. Call or Fax:
Call 905.820.6150 or 1.800.363.1588 Fax: 905.820.6142 Email: sales@techspan.ca Loom & Tubing What s New? Expandable Braided Loom High Temperature Fiber Glass Sleeving Convoluted Tubing/Split Loom on Spools
Mineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
> Vacuum Tubing 4040A...Standard, EPDM D...Reinforced EPDM T...High temperature, silicone...92
Coolant Fuel Oil AIR > Defroster, Air Duct, Pre-Cleaner 7768...Low cost, thin propylene-ethylene with PP helix...83 4663A...Thicker, neoprene with wire helix...84 4663J...Heavy duty, neoprene with wire
Eaton Spiral Hose and Hose Fittings 4S/6S and Product Positioning Eaton. All Rights Reserved..
Eaton Spiral Hose and Hose Fittings 4S/6S and Product Positioning. Product Portfolio Core Rubber Spiral Hydraulic Hose & Fittings High Temp Abrasion 4S/6S Low Temp 2 Simplification of the Eaton Spiral
AA-AMPX-SS. Stage I & II Air Management Packages w/ SwitchSpeed Controller. Shown: AA-AMP2-SS-EN
Shown: AA-AMP2-SS-EN The SwitchSpeed Air Management Packages bring together all of the highest quality components available to operate your Air Springs in one easy to order part number. Choose between
Kulka Military Class (A-A-59125)/(MIL-T-55164)
Kulka Military Class (A-A-59125)/(MIL-T-55164) Military Class: Closed Back These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting
AA-AMPX-SS. Stage I & II Air Management Packages w/ SwitchSpeed Controller
The SwitchSpeed Air Management Packages combine all of the components required to operate your Air Suspension with one easy to order part number. These packages can easily be upgraded to an e-level Electronic
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
HelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
Eaton Aeroquip Core Hydraulic Hose Products Brochure. Success made simple. The new standard for hydraulic hose and fittings.
Eaton Aeroquip Core Hydraulic Hose Products Brochure Success made simple. The new standard for hydraulic hose and fittings. Sometimes less is more. Fewer products, smarter choices. Eaton is taking a new
VACUUM AND CHARGING HOSES
VACUUM AND HOSES RECOVERY YELLOW JACKET HVAC&R VACUUM SUPEREVAC AND HOSES YELLOW JACKET PLUS II Charging Hoses Double barrier protection for CFC, HCFC and HFC refrigerants 20 EDITION 62 CATALOG RECOVERY
> Vacuum Brake Standard automotive vacuum brake (NABT)...Nylon air brake tubing, color coded...105
BRAKE >, Compressor 3245E...Standard...101 3245G...Heavy duty...101 3245T...Low temperature...102 3658C (C5C)...Higher pressure, wire braid reinforced, use field-attachable couplings...102 3658E (C5E)...Higher
Cable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
TOOLFLEX HTMA PRODUCTS CATALOG. 901 E Jefferson St. Bensenville, Illinois Phone: Fax:
TOOLFLEX 901 E Jefferson St. Bensenville, Illinois 60106 Phone: Fax: 847-455-4559 HTMA PRODUCTS CATALOG TOOLFLEX LOW TWIN NON-CONDUCTIVE HOSE ASSEMBLIES This hose is designed for hydraulic tool applications
Uniflex is the first in India to manufacture hose assemblies using pallet swage fittings.
Universal Flexibles Pvt. Ltd. is involved in the manufacture of top of the line quality Hydraulic Assemblies having commenced operations at Bangalore in 1987. Tradition of excellence Uniflex is the first
Wire Reinforced Synthetic Rubber Hose Assemblies
Aeroquip Wire Reinforced Synthetic Rubber Hose Assemblies Lightweight and Flexible Qualified to Industry Standards Integral Abrasion and Fire Resistance Covers Available Aeroquip Wire Reinforced Synthetic
TRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES. 10 Trailer Sockets. 11 Nose Boxes & Socket Breakers
02 10 Trailer Sockets 11 Nose Boxes & Socket Breakers 12 Trailer Plugs 16 Junction Boxes 16 Corrosion Preventive Sealant TRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES
SPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
Aeroquip 3,000 psi Teflon Hose and Hose Assemblies
Aeroquip 3,000 psi Teflon Hose and Hose Assemblies Lightweight Meets performance requirements of AS1339 50% tighter bend radius Improved flexing characteristics Weight savings Table of Contents 3 AE246
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
Compression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
Product Number
Sealing and Grounding Cold Shrink cable accessory sealing kits are designed to seal the end of JCN cable. Use these kits when installing elbows or other cable accessories that do not include a jacket seal.
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Cannon Trident Connector System
is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for
Thermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
SEALSAFE PRODUCTS CONDUIT AND CABLE PRODUCTS. for HARSH AND HAZARDOUS ENVIRONMENTS. Certificate ANZEx
SEALSAFE PRODUCTS CONDUIT AND CABLE PRODUCTS for HARSH AND HAZARDOUS ENVIRONMENTS Certificate ANZEx 09.3018 SEALSAFE ZONE 1 HAZARDOUS AREA CONDUIT AND FITTINGS Sealsafe provides a range of nickel plated
Cable Protection Solutions for Shielding Applications CATALOG LOCK 2013 VERSION 1.0
Cable Protection Solutions for Shielding pplications LOCK CTLOG 2013 VERSION 1.0 Cable Protection Solutions for Shielding pplications Electromagnetic interference (EI) is noise that may interrupt, obstruct,
Aeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
Function ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
QUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
Thermoplastic Hose Quick Reference Guide
Thermoplastic Hose Quick Reference Guide 4703 4700 SAE 100R3 SAE 100R7 Low Pressure Hydraulics High Pressure Pneumatics Hand Tools Lubrication System Pilot Lines and Joystick Controls General Hydraulics
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101) M12
K12 High Performance Key Switches
Features/Benefits Excellent tactile feel Wide choice of LE colors, travel and actuator forces High reliability / long life Sealed version available esigned for low-level switching ouble stroke version
6000 Series Ethernet Buccaneer
Thermo-plastic version Patch Cord Flex Connector - Pur Jacket Cable PXP6037 Mates with PXP6033TP type panel mounting Overmoulded patchcords with IP rated connector Supplied with shielded RJ45 plug Single
Pressure Gauge Kit and Test Couplings
Pressure Gauge Kit and Test Couplings Overview The Eaton pressure gauge kit and screw together test couplings provide accurate and efficient pressure control and monitoring of your hydraulic system, while
Aeroquip BRUISER FC735 FC736 FC839B FC273B FC849B FC606B. Abrasion-Resistant Polymer-Covered Hose
Aeroquip BRUISER Abrasion-Resistant Polymer-Covered Hose FC735 FC736 FC839B FC273B FC849B FC606B FC735 BRUISER Double wire braid Exceeds DIN 20 0022 Type 2SN HI-IMPULSE at 1/2 SAE bend radius FC735-04*.25.57
FISCHER ULTIMATE TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES
H CHAPTER PAGES FISCHER TM SERIES RUGGED COMPACT LIGHTWEIGHT KEY FEATURES IP68 to -0m / IP69 / Hermetic 60 EMC shielding High corrosion resistance 0,000 mating cycles H - FISCHER TM SERIES Table of contents
FreezeFree TM Nitro Anti-Icing System GENERAL SPECIFICATIONS
I. GENERAL FreezeFree TM Nitro Anti-Icing System GENERAL SPECIFICATIONS The FreezeFree Nitro Anti-Icing System shall be designed and manufactured by Energy Absorption Systems, Inc., of Chicago, Illinois.
Electrical. Hardware & Fastening Solutions. Battery Supplies. J-Case Fuses - Regular... Page 162
Flag Style... Page 156 Electrical Batteries... Page 153 Mounting Pads (Adhesive Backed)... Page 161 Battery Supplies J-Case Fuses - Regular... Page 162 Booster Cable Supplies... Page 153 J-Case Fuses -
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 03 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
K12 High Performance Key Switches
High Performance Features/Benefits Typical Applications Excellent tactile feel Automotive Wide choice of LE colors, Off-road transportation travel and actuator forces Industrial electronics High reliability
Delivering powerful solutions.
Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
Quicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Niagara Orinoco Vibrator Volga Shannon 80 Volga fra. Material handling hose. Abr
Abr Niagara Orinoco Vibrator Volga Shannon 80 Volga fra Material handling hose Abr 56 Abr Niagara :,,. : -40 (-40 F) +70 (+58 F) :,,, SBR/NR,. :. :,, SBR/NR,. : DIN 5356 70+/- 5 mm 3 : IVG Abr : Niagara
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
SUPPLY JOINTS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Specifications, Order Codes, Size Table 371 Dimensions 373 NCU Specification Order Codes, Model Table 379
Data sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101)
Function ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
Tubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 02 0000 0180 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
S P R AY E R VA L V E S AND C O N T ROL S C AT A L OG
Q UA L I T Y VA LV E S A N D C O N T R O L S. TO D AY A N D TO M O R R O W. Texas Industrial Remcor, Inc. CATALOG NO. 33 The new RC2 control system: Ensures no potential leaks in the tractor cab when using
200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
AMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
NEW YORK AIR BRAKE. Air Hose Products. Catalog & Application Guide/ Freight Car & Locomotive
NEW YORK AIR BRAKE Air Hose Products Catalog & Application Guide/ Freight Car & Locomotive P R O D U C T I V I T Y T H R O U G H T E C H N O L O G Y Air Hose Assemblies & Fittings New York Air Brake is
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
Photoelectric Sensors OEM Prism Series
PG.05E.20.T.E High Performance 8 mm Tubular Sensors Packaged for High Volume Users Contents Overview...................... Model Selection, Sensors......... 2 Model Selection, Compatible Connector Cables..............
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS
GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
CAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS
Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits
Sec. 11 NYLON CONNECTORS
Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
Low Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
FUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
Data sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight
Synflex Hose and Fittings. Master Catalog
Synflex Hose and Fittings Master Catalog Table of Contents Hose Selection Chart (by application/product)...3 Hydraulic Pressure Hose Selection Chart...5 Low and Medium Pressure Hose...7-10 3R30 Low Pressure...7