Digimatic. Linear Height

Size: px

Start display at page:

Download "Digimatic. Linear Height"

Francine Dickerson
5 years ago
Views:

D Smll Tool Instruments n Dt Mngement Digimti Cliper Digimti Height Gges iner Height Depth Gges SuperCliper ABSOUTE Coolnt Proof Cliper ABSOUTE Digimti Cliper ABSOUTE Digimti Offset Cliper INDEX

1 D Smll Tool Instruments n Dt Mngement Digimti Cliper Digimti Height Gges iner Height Depth Gges SuperCliper ABSOUTE Coolnt Proof Cliper ABSOUTE Digimti Cliper ABSOUTE Digimti Offset Cliper INDEX Digimti Cliper Super Cliper-Solr Powere D-2 ABSOUTE Solr Cliper D-3 ABSOUTE Coolnt Proof Cliper D-4, 5 ABSOUTE Digimti Cliper D-6, 7 Dil Cliper D-8, 9 Vernier Cliper - Stnr Moel D-10, 11 Vernier Cliper - w/thum Clmp D-12 Vernier Cliper - w/fine Ajustment D-13 Vernier Cliper - w/ni Style Jws D-14 ABSOUTE Digimti & Vernier Cliper D-15, 17 ong Jw Vernier Cliper D-16 Digimti Cron Fier Cliper D-18, 19 ABSOUTE Coolnt Proof Cron Fier Cliper D-20 ABSOUTE Bk-Jw Centerline Cliper D-21 Offset Cliper D-22 Offset Centerline Cliper D-23 Point Cliper D-24 Ble Type Cliper D-25 Nek Cliper D-26 Tue Thikness Cliper D-27 ABSOUTE ow Fore Cliper D-28 ABSOUTE Snp Cliper D-28 Sriing Cliper D-29 ABSOUTE Insie Cliper D-30, 31 MyCA-ite D-32 Plsti Cliper D-32 Center ine Gge D-33 Depth Bse Atthment D-33 Digimti Height Gges Digimti Height Gge D-34, 35 Dil Height Gge D-36 ABSOUTE Digimti Height Gge D-37, 38 Heightmti D-39 Vernier Height Gge D-40, 41 Crie-Tippe Srier D-42 Optionl Aessories for Height Gge D-42 CERA Cliper Cheker D-43 iner Height H-600D D-44, 45 QM-Height D-46, 47 Depth Gges Depth Mirometer D-48, 49 Depth Miro Cheker D-49 ABSOUTE Digimti Depth Gge D-50 Vernier Depth Gge D-51 Vernier Depth Gge - Hook En Type D-52 ABSOUTE Digimti Depth Gge - D-52 Hook En Type Dil Depth Gge D-53 Extension Bses D-53 ABSOUTE Digimti/Dil Depth Gge D-54, 55 Tire Thre Depth Gge D-56 Digimti Height Gge D-1

2 Super Cliper-Solr Powere SERIES 500 No ttery or origin reset neee for IP67 Digitl Cliper With no nnoying origin restortion neessry, mesurement n e strte ny time n there is no restrition on operting spee. Insuffiient illumintion stte Suffiient illumintion stte 16.78mm No nee for origin set up Rnge Orer No. Aury Resolution 0-150mm ±0.02mm 0.01mm 0-150mm * ±0.02mm 0.01mm 0-200mm ±0.02mm 0.01mm 0-200mm * ±0.02mm 0.01mm *Without SPC t output Worl s unique* solr-powere Super Cliper tht is eo-frienly with no ttery. *Aoring to Mitutoyo investigtion in Jnury, 2005 The impt resistne of the isply unit hs een inrese for improve usility in workshop onitions. IP67 protetion ssures wterproof reliility. This Super Cliper uses omponents tht o not ontin hrmful sustnes n is omptile with RoHS Diretives. Supplie in fitte plsti se. Improvement in surfe finish of em Conventionl Diretion of the length R: 0.126µm Super Cliper Diretion of the length R: 0.07µm Inh/ Rnge Orer No. Aury Resolution 0-6" / 0-150mm ± / 0.01mm 0-6" / 0-150mm * ± / 0.01mm 0-8" / 0-200mm ± / 0.01mm 0-8" / 0-200mm * ± / 0.01mm *Without SPC t output Aury: Refer to the list of speifitions Resolution:.0005"/0.01mm or 0.01mm Repetility:.0005 / 0.01mm Disply: CD ength stnr: ABSOUTE eletromgneti inution liner enoer Mx. response spee: Unlimite Bttery: Solr ttery* Dust/Wter protetion level: IP67 *Cn e use ontinuously ove 60 lux mient illumintion. Funtion Origin-set, inh/mm onversion (on inh/metri moels only) Alrm: Counting vlue omposition error Optionl Aessories 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) IP67 protetion level evel 6: Dust-tight No ingress of ust. evel 7: Protete ginst the effets of temporry immersion in wter. Ingress of wter in quntities using hrmful effets shll not e possile when the enlosure is temporrily immerse 1 meter in wter uner stnrize onitions of pressure n time (30 min.). 1m DIMENSIONS AND MASS Aout the hrge funtion (Super Cliper) The minimum illumintion require in the unhrge stte is 60 lux. As shown in the tle JIS Z 9110 Artifiil Illumintion Intensity Stnr, this Super Cliper n e use without prolems in norml work environment. Rnge Mss (g) 0-6 / 0-150mm / 0-200mm Jw thikness: 3.5mm The hrge funtion llows the opertor to use this Super Cliper without interrupting work even if the mient illumintion is temporrily insuffiient. In the fully hrge stte this Super Cliper n operte for pproximtely n hour in n environment of 50lux illumintion (less thn the minimum neessry illumintion intensity). The time neessry for full hrge iffers, epening on the hrging onitions. If this Super Cliper is left unuse in n illumintion of 500 lux (usul for mnufturing environments), it tkes pproximtely one hour to reh full hrge. D-2

3 ABSOUTE Solr Cliper SERIES 500 No ttery or origin reset neee Mitutoyo's Asolute Solr Digimti Cliper retins its origin point even the isply turns off for the entire life of the liper. At 60 ux n up the ABSOUTE solr liper is turne on rey to strt mesurement. No more repete zero setting use y low light intensity. Hr-ote solr pnel for inrese urility. No fer for overspee errors. With thum roller. Supplie in fitte plsti se Aury: Refer to the list of speifitions Resolution:.0005 /0.01mm or 0.01mm Repetility:.0005 / 0.01mm Disply: CD ength stnr:absoute eletrostti pitne type liner enoer Mx. response spee: Unlimite Bttery: Solr ttery* *Cn e use ontinuously ove 60 lux mient illumintion. Funtion Origin-set, Dt hol, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: Counting vlue omposition error Optionl Aessories : Dt hol unit (SPC output moel only) : SPC le with t swith (40 / 1m) : SPC le with t swith (80 / 2m) Rnge Orer No. Aury Resolution Remrks 0-100mm ±0.02mm 0.01mm ø1.9mm roun epth r 0-100mm * ±0.02mm 0.01mm ø1.9mm roun epth r 0-150mm ±0.02mm 0.01mm 0-150mm * ±0.02mm 0.01mm 0-200mm ±0.02mm 0.01mm 0-200mm * ±0.02mm 0.01mm *without SPC t output Inh/ Rnge Orer No. Aury Resolution Remrks 0-4" / 0-100mm ± / 0.01mm.075 roun epth r 0-4" / 0-100mm * ± / 0.01mm.075 roun epth r 0-6" / 0-150mm ± / 0.01mm 0-6" / 0-150mm * ± / 0.01mm 0-8" / 0-200mm ± / 0.01mm 0-8" / 0-200mm * ± / 0.01mm *without SPC t output DIMENSIONS AND MASS 16 Rnge Mss (g) 0-4" / 0-100mm " / 0-150mm " / 0-200mm D-3

ABSOUTE Coolnt Proof Cliper SERIES 500 with Dust/Wter Protetion Conforming to IP67 evel Cn e use in workshop onitions expose to oolnt, wter, ust or oil.

With thum roller. Supplie in fitte plsti se. 500-752-10 500-763-10 Aury: Refer to the list of speifitions Resolution:.0005"/0.01mm or 0.01mm Repetility:.

use immeitely fter power-on without origin resetting. It s s esy s vernier liper mesurements.

4 ABSOUTE Coolnt Proof Cliper SERIES 500 with Dust/Wter Protetion Conforming to IP67 evel Cn e use in workshop onitions expose to oolnt, wter, ust or oil. Esy to use - no nee to wipe or len the sle. Avne esign styling. Inorportes solute mesurement system. Automti power-on/off. Dt output funtion. With thum roller. Supplie in fitte plsti se Aury: Refer to the list of speifitions Resolution:.0005"/0.01mm or 0.01mm Repetility:.0005 / 0.01mm Disply: CD ength stnr: ABSOUTE eletromgneti inution liner enoer Mx. response spee: Unlimite Bttery: SR44 (1 p./2 ps*), Bttery life: Approx. 3 yers uner norml use (1 yer: over 12 / 300mm moels) Dust/Wter protetion level: IP67 *0-300mm moel Built-in ABS (solute) sle mens tht these lipers re rey to use immeitely fter power-on without origin resetting. It s s esy s vernier liper mesurements. Funtion Origin-set, Zero-setting, Automti power on/off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m ) Power OFF Power ON No origin resetting 05CZA624 Certifite of inspetion Mesurement t output funtion is ville with wter-resistnt SPC le. D-4

Air lekge etetion system use for wter-proof testing Generlly, ir lekge tests re performe to evlute wter resistne. Testing egins y pling mesuring tool into the psule.

5 Air lekge etetion system use for wter-proof testing Generlly, ir lekge tests re performe to evlute wter resistne. Testing egins y pling mesuring tool into the psule. Next, ir with equivlent pressure is supplie to the psule n the mster, then the vlves re lose. If none of the ir in the psule seeps into the mesuring tool, the psule s ir pressure will remin equl to tht in the mster, n the ifferentil pressure gge will ontinue to point to the enter. However, if some ir oes seep into the mesuring tool, it will rete n ir pressure ifferene in the mount inite y the ifferentil pressure gge. Thus, etetion of ir pressure ifferenes is use s riterion for juging lekge. Every single unit of the ABS Coolnt Proof lipers n Coolnt Proof mirometer is teste this wy for ir lekge to help ensure prout qulity. Cpsule Vlve Differentil pressure gge Air Vlve Mster IP67 moel Rnge Orer No. Aury Resolution Remrks 0-150mm * +/-0.02mm 0.01mm 0-150mm /-0.02mm 0.01mm 0-150mm /-0.02mm 0.01mm i. 1.9mm ro epth r 0-150mm /-0.02mm 0.01mm rie-tippe jws for ID mesurement 0-150mm /-0.02mm 0.01mm rie-tippe jws for OD & ID mesurement 0-200mm * +/-0.02mm 0.01mm 0-200mm /-0.02mm 0.01mm 0-200mm /-0.02mm 0.01mm rie-tippe jws for ID mesurement 0-200mm /-0.02mm 0.01mm rie-tippe jws for OD & ID mesurement 0-300mm * +/-0.03mm 0.01mm 0-300mm /-0.03mm 0.01mm *without SPC t output IP67 protetion level evel 6: Dust-tight No ingress of ust. evel 7: Protete ginst the effets of temporry immersion in wter. Ingress of wter in quntities using hrmful effets shll not e possile when the enlosure is temporrily immerse 1 meter in wter uner stnrize onitions of pressure n time (30 min.). Inh/ Rnge IP67 moel Orer No. Aury Resolution Remrks 0-6 /0-150mm * +/ /0.01mm 0-6 /0-150mm / /0.01mm 0-6 /0-150mm * +/ /0.01mm.075 ro epth r 0-6 /0-150mm / /0.01mm.075 ro epth r 0-6 /0-150mm * +/ /0.01mm rie-tippe jws for ID mesurement 0-6 /0-150mm / /0.01mm rie-tippe jws for ID mesurement 0-6 /0-150mm * +/ /0.01mm rie-tippe jws for OD & ID mesurement 0-6 /0-150mm / /0.01mm rie-tippe jws for OD & ID mesurement 0-8 /0-200mm * +/ /0.01mm 0-8 /0-200mm / /0.01mm 0-8 /0-200mm * +/ /0.01mm rie-tippe jws for ID mesurement 0-8 /0-200mm / /0.01mm rie-tippe jws for ID mesurement 0-8 /0-200mm * +/ /0.01mm rie-tippe jws for OD & ID mesurement 0-8 /0-200mm / /0.01mm rie-tippe jws for OD & ID mesurement 0-12 /0-300mm * +/ /0.01mm 0-12 /0-300mm / /0.01mm *without SPC t output 1m DIMENSIONS AND MASS e Rnge e Mss (g) 0-6 / 0-150mm / 0-200mm / 0-300mm D-5

6 ABSOUTE Digimti Cliper SERIES 500 with Exlusive ABSOUTE Enoer Tehnology Mitutoyo's solute Digimti Cliper is the next genertion of eletroni lipers. It keeps trk of its origin point one set. Whenever turne on, the lrge CD sreen isplys the tul slier position rey to strt mesurement. No more repete zero setting is neessry with the solute enoer tehnology s well s no more re for overspee errors. High qulity guie surfe finish for smooth slier movement Conventionl Diretion of the length R: 0.126µm ABS Digimti Cliper Diretion of the length R: 0.07µm rge n ler CD reout. The ZERO/ABS key llows the isply to e Zero-Set t ny slier position long the sle for inrementl omprison mesurements. This swith will lso llow return to the solute (ABS) oorinte n isply of the true position from the origin point (usully jws-lose point). Dt Hol Unit (959143) is optionl. Crie-tippe jw type lipers re lso ville. Thum roller inlue only on lipers up to n inluing 12 or 300mm. Supplie in fitte plsti se. Exept 40 / 1000mm supplie in wooen se DIMENSIONS AND MASS Aury: Refer to the list of speifitions Resolution:.0005 /0.01mm or 0.01mm Repetility:.0005 / 0.01mm Disply: CD ength stnr: ABSOUTE eletrostti pitne type liner enoer Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 3.5 yers uner norml use Rnge Mss (g) 0-4 / 0-100mm / 0-150mm / 0-200mm / 0-300mm Funtion Origin-set, Zero-setting, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories : Dt hol unit : SPC le with t swith (40 / 1m) : SPC le with t swith (80 / 2m) Rnge Mss (g) 0-18 / 0-450mm / 0-600mm / mm D-6

500-506-10 500-502-10 500-501-10 500-500-10 Rnge Orer No. Aury Resolution Remrks 0-100mm 500-150-20 ±0.02mm 0.01mm ø1.9mm ro epth r 0-150mm 500-151-20 ±0.02mm 0.01mm 0-150mm 500-154-20 ±0.02mm 0.01mm Crie-tippe jws for OD mesurement 0-150mm 500-155-20 ±0.

02mm 0.01mm Crie-tippe jws for OD & ID mesurement 0-300mm 500-153 ±0.03mm 0.01mm 0-450mm 500-500-10* ±0.05mm 0.01mm Without Thum Roller 0-600mm 500-501-10* ±0.05mm 0.01mm Without Thum Roller 0-1000mm 500-502-10* ±0.

7 Rnge Orer No. Aury Resolution Remrks 0-100mm ±0.02mm 0.01mm ø1.9mm ro epth r 0-150mm ±0.02mm 0.01mm 0-150mm ±0.02mm 0.01mm Crie-tippe jws for OD mesurement 0-150mm ±0.02mm 0.01mm Crie-tippe jws for OD & ID mesurement 0-150mm ±0.02mm 0.01mm ø1.9mm ro epth r 0-200mm ±0.02mm 0.01mm 0-200mm ±0.02mm 0.01mm Crie-tippe jws for OD mesurement 0-200mm ±0.02mm 0.01mm Crie-tippe jws for OD & ID mesurement 0-300mm ±0.03mm 0.01mm 0-450mm * ±0.05mm 0.01mm Without Thum Roller 0-600mm * ±0.05mm 0.01mm Without Thum Roller mm * ±0.07mm 0.01mm Without Thum Roller *without thum rollers Inh/ Rnge Orer No. Aury Resolution Remrks 0-4" / 0-100mm ± / 0.01mm.075" ro epth r 0-4" / 0-100mm * ± / 0.01mm.075" ro epth r 0-6" / 0-150mm ± / 0.01mm 0-6" / 0-150mm ± / 0.01mm Crie-tippe jws for OD mesurement 0-6" / 0-150mm ± / 0.01mm Crie-tippe jws for OD & ID mesurement 0-6" / 0-150mm ± / 0.01mm.075" ro epth r 0-6" / 0-150mm * ± / 0.01mm 0-6" / 0-150mm * ± / 0.01mm Crie-tippe jws for OD mesurement 0-6" / 0-150mm * ± / 0.01mm Crie-tippe jws for OD & ID mesurement 0-8" / 0-200mm ± / 0.01mm 0-8" / 0-200mm ± / 0.01mm Crie-tippe jws for OD mesurement 0-8" / 0-200mm ± / 0.01mm Crie-tippe jws for OD & ID mesurement 0-8" / 0-200mm * ± / 0.01mm 0-8" / 0-200mm * ± / 0.01mm Crie-tippe jws for OD mesurement 0-8" / 0-200mm * ± / 0.01mm Crie-tippe jws for OD & ID mesurement 0-12" / 0-300mm ± / 0.01mm 0-12" / 0-300mm ± / 0.01mm Crie-tippe jws for OD mesurement 0-12" / 0-300mm ± / 0.01mm Crie-tippe jws for OD & ID mesurement 0-12" / 0-300mm * ± / 0.01mm 0-12" / 0-300mm * ± / 0.01mm Crie-tippe jws for OD mesurement 0-12" / 0-300mm * ± / 0.01mm Crie-tippe jws for OD & ID mesurement 0-18" / 0-450mm ± / 0.01mm Without Thum Roller 0-24" / 0-600mm ± / 0.01mm Without Thum Roller 0-40" / mm ± / 0.01mm Without Thum Roller *without SPC t output D-7

Dil Cliper SERIES 505 New esigne il movement for ultr smooth sliing n high shok protetion.

moel). ok srew for il ezel n for holing the sliing jw position. Cn mesure OD, ID, epth, n steps.

505-677 505-675 505-673 505-681 1mm Per One Revolution Rnge Orer No.

01mm 0-200mm 505-682 +/-0.03mm 0.01mm 2mm Per One Revolution Rnge Orer No.

8 Dil Cliper SERIES 505 New esigne il movement for ultr smooth sliing n high shok protetion. Titnium Nitrie (TiN) oting is pplie to the sliing surfe to inrese wer resistne (exept for 0-12 n 0-300mm moel). ok srew for il ezel n for holing the sliing jw position. Cn mesure OD, ID, epth, n steps. Moels ville with rie-tippe OD n ID jws. Supplie in fitte plsti se mm Per One Revolution Rnge Orer No. Aury Grution Remrks 0-100mm /-0.015mm 0.01mm 0-150mm /-0.03mm 0.01mm 0-200mm /-0.03mm 0.01mm 2mm Per One Revolution Rnge Orer No. Aury Grution Remrks 0-150mm /-0.03mm 0.02mm 0-150mm /-0.03mm 0.02mm Crie-tippe jws for OD mesurement 0-150mm /-0.03mm 0.02mm Crie-tippe jws for OD & ID mesurement 0-200mm /-0.03mm 0.02mm 0-300mm /-0.04mm 0.02mm D-8

9 "Quri" (4-wy) Mesurement 1. Outsie mesurement 2. Insie mesurement Inh.1 Per One Revolution Rnge Orer No. Aury Grution Remrks / / / Blue Dil Fe / Purple Dil Fe / Green Dil Fe / Re Dil Fe / Ornge Dil Fe / Blk Dil Fe / Blk Dil Fe with Rthet Stop / Extr smooth movement / Crie-tippe jws for OD mesurement / Crie-tippe jws for OD & ID mesurement / / Extr smooth movement / Crie-tippe jws for OD mesurement / Crie-tippe jws for OD & ID mesurement / / Crie-tippe jws for OD mesurement / Crie-tippe jws for OD & ID 3. Step mesurement Inh.2 Per One Revolution Rnge Orer No. Aury Grution Remrks / / / Crie-tippe jws for OD mesurement / / / Crie-tippe jws for OD mesurement DIMENSIONS AND MASS 4. Depth mesurement Results of 1,000,000 yle sliing wer test TiN oting Wer: 0µm Conventionl Wer: 4µm Rnge Mss (g) 0-4"/ 0-100mm "/ 0-150mm "/ 0-200mm "/ 0-300mm D-9

Vernier Cliper SERIES 530 Stnr Moel Cn mesure OD (outsie imeter), ID (insie

Crie-tippe jw type lipers re lso ville. Supplie with vinyl holster in fitte rton.

14 530-101 530-109 Crie-tippe DIMENSIONS AND MASS Crie-tippe jw type Rnge Mss (g)

10 Vernier Cliper SERIES 530 Stnr Moel Cn mesure OD (outsie imeter), ID (insie imeter), epth, n steps. The smll vernier fe ngle (14 ) provies esy reing. Dul reing sles on vernier. (metri/inh n inh moels only) ok srew for holing the sliing jw position. Crie-tippe jw type lipers re lso ville. Supplie with vinyl holster in fitte rton. Exept 24 / 600mm moels re rton only. 40 / 1000mm supplie in wooen se Crie-tippe DIMENSIONS AND MASS Crie-tippe jw type Rnge Mss (g) 0-150mm mm mm mm , mm ,300 Roun epth r type D-10

11 Quri (4 wy) Mesurement Mesurement Applitions OD mesurement Rnge Orer No. Aury Grution Remrks 0-150mm ±0.05mm 0.05mm ø 1.9mm Depth r 0-150mm ±0.05mm 0.05mm 0-150mm ±0.05mm 0.05mm Crie-tippe jws for OD mesurement 0-150mm ±0.05mm 0.05mm Crie-tippe jws for OD & ID mesurement 0-150mm * ±0.03mm 0.02mm High ury moel 0-200mm ±0.05mm 0.05mm 0-200mm ±0.05mm 0.05mm Crie-tippe jws for OD mesurement 0-200mm * ±0.03mm 0.02mm High ury moel 0-300mm ±0.08mm 0.05mm 0-300mm ±0.08mm 0.05mm Crie-tippe jws for OD mesurement 0-300mm * ±0.04mm 0.02mm High ury moel: ±0.04mm 0-600mm ** ±0.1mm 0.05mm mm ** ±0.15mm 0.05mm *Grution: 0.02mm **No epth mesuring r ID mesurement /Inh with metri/inh ul sle Rnge Orer No. Aury Vernier Grution Remrks ower Sle Upper Sle 0-150mm / ±0.05mm 0.05mm 1/128" 0-150mm / ±0.05mm 0.05mm 1/128" 0-150mm / * ±0.03mm 0.02mm.001" High ury moel 0-200mm ±0.05mm 0.05mm 1/128" 0-200mm * ±0.03mm 0.02mm.001" High ury moel 0-300mm ±0.08mm 0.05mm 1/128" 0-300mm * ±0.04mm 0.02mm.001" High ury moel *Grution: 0.02mm Inh with inh/inh ul sle Rnge Orer No. Aury Vernier Grution Remrks ower Sle Upper Sle 0-6" ± /128" 0-8" ± /128" Step mesurement Depth mesurement D-11

12 Vernier Cliper SERIES 531 with Thum Clmp The slier moves only when the spinle loe thum lmp is epresse. Cn mesure OD, ID, epth, n steps Supplie with vinyl holster in fitte rton. Quri (4 wy) Mesurement Mesurement Applitions Thum lmp Rnge Orer No. Aury Grution Remrks 0-150mm ±0.05mm 0.05mm 0-200mm ±0.05mm 0.05mm 0-300mm ±0.08mm 0.05mm OD mesurement /Inh with metri/inh ul sle Rnge Orer No. Aury Grution Remrks ower Sle Upper Sle 0-150mm / 0-6" ±0.05mm 0.05mm 1/128" with inh/mm onversion lel 0-150mm / 0-6" ±0.03mm 0.02mm.001 High ury moel 0-200mm / ±0.05mm 0.05mm 1/128" 0-200mm / ±0.03mm 0.02mm.001 High ury moel 0-300mm / ±0.08mm 0.05mm 1/128" 0-300mm / ±0.04mm 0.02mm.001 High ury moel ID mesurement DIMENSIONS AND MASS Step mesurement C Rnge Mss (g) 0-6"/ 0-150mm "/ 0-200mm mm Depth mesurement D-12

13 Vernier Cliper SERIES 532 with Fine Ajustment Quri (4 wy) Mesurement Mesurement Applitions Provie with fine-justment rrige to fee the slier finely. Cn mesure OD, ID, epth, n steps. Supplie with vinyl holster in fitte rton. OD mesurement Rnge Orer No. Aury Grution 0-130mm ±0.03mm 0.02mm 0-180mm ±0.03mm 0.02mm 0-280mm ±0.04mm 0.02mm ID mesurement /Inh with metri/inh ul sle Rnge Orer No. Aury Grution ower Sle Upper Sle 0-130mm / ±0.03mm 0.02mm.001" 0-180mm / ±0.03mm 0.02mm.001" 0-280mm / ±0.04mm 0.02mm.001" Inh with inh/inh ul sle Rnge Orer No. Aury Grution ower Sle Upper Sle 0-5" ± /128" 0-7" ± /128" 0-11" ± /128" Step mesurement DIMENSIONS AND MASS Depth mesurement Rnge Mss (g) 0-5" / 0-130mm " / 0-180mm " / 0-280mm D-13

Vernier Cliper SERIES 160 with Ni Style Jws n Fine Ajustment The jws hve roun mesuring fes for urte ID mesurement. With fine justment rrige to fee the slier finely.

14 Vernier Cliper SERIES 160 with Ni Style Jws n Fine Ajustment The jws hve roun mesuring fes for urte ID mesurement. With fine justment rrige to fee the slier finely. Insie n outsie mesurements n e iretly re from the upper n lower slier grutions, respetively. Supplie with vinyl holster in fitte rton. Exept 12 / 300mm, 18 / 450mm n 24 / 600mm re fitte rton only. Over 24 / 600mm supplie in wooen se. Aury: Refer to the list of speifitions. Grution: Refer to the list of speifitions with metri/metri ul sle Rnge* Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (10) - 300mm ±0.04mm 0.02mm 0.02mm (20) - 450mm ±0.05mm 0.02mm 0.02mm 1,200 0 (20) - 600mm ±0.05mm 0.02mm 0.02mm 2,600 0 (20) mm ±0.07mm 0.02mm 0.02mm 3,500 0 (20) mm ±0.09mm 0.02mm 0.02mm 4,850 0 (20) mm ±0.12mm 0.02mm 0.02mm 10,200 *( ): Minimum imension in ID mesurement /Inh with metri/inh ul sle Rnge* Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (10) - 300mm / 0 (.3 ) - 12" ±0.04mm 0.02mm (20) - 450mm / 0 (.5 ) - 18" ±0.05mm 0.02mm.001 1,200 0 (20) - 600mm / 0 (.5 ) - 24" ±0.05mm 0.02mm.001 1,400 0 (20) mm / 0 (1 ) - 40" ±0.07mm 0.02mm.001 3,500 0 (20) mm / 0 (1 ) - 60" ±0.09mm 0.02mm.001 4,850 0 (20) mm / 0 (1 ) - 80" ±0.12mm 0.02mm ,200 *( ): Minimum imension in ID mesurement Inh with inh/inh ul sle Rnge* Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (.3 ) - 12" ±.0015" (.5 ) - 18" ±.002" ,200 0 (.5 ) - 24" ±.002" ,400 0 (1 ) - 40" ±.003" ,500 0 (1 ) - 60" ±.004" ,850 0 (1 ) - 80" ±.005" ,200 *( ): Minimum imension in ID mesurement Inh/ with inh/metri ul sle Rnge* Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (.3 ) - 12" / 0 (10) - 300mm ±.0015" mm (.5 ) - 18" / 0 (20) - 450mm ±.002" mm 1,200 0 (.5 ) - 24" / 0 (20) - 600mm ±.002" mm 1,400 0 (1 ) - 40" / 0 (20) mm ±.003" mm 3,500 0 (1 ) - 60" / 0 (20) mm ±.004" mm 4,850 0 (1 ) - 80" / 0 (20) mm ±.005" mm 10,200 *( ): Minimum imension in ID mesurement DIMENSIONS Roun surfe of jws for urte ID mesurement e Rnge e 0-12 / 0-300mm / 0-450mm / 0-600mm / mm / mm / mm D-14

ABSOUTE Digimti & Vernier Cliper SERIES 550, 160 with Ni Style Jws Vernier grution Min sle grutions Prllel sle fes The roune fes of the jws re iel for urte ID (insie imeter) mesurement.

15 ABSOUTE Digimti & Vernier Cliper SERIES 550, 160 with Ni Style Jws Vernier grution Min sle grutions Prllel sle fes The roune fes of the jws re iel for urte ID (insie imeter) mesurement. Insie n outsie mesurements n e iretly re from the upper n lower slier grutions (Series 160). With fine-justment rrige type is ville (Series 160). Prllx-free vernier sle type is ville for esy n positive mesurement (Series 160). With SPC output (Series 550). Supplie in fitte plsti se. Exept 40 / 1000mm supplie in wooen se. Aury: Refer to the list of speifitions. Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel : Dt hol unit : SPC le with t swith (40 / 1m) : SPC le with t swith (80 / 2m) 05CZA624: SPC le with t swith (40 / 1m) for IP67 moel 05CZA625: SPC le with t swith (80 / 2m) for IP67 moel Rnge* Digitl moel Orer No. Aury Resolution Mss (g) Remrks 0 (10) - 200mm ±0.03mm 0.01mm 180 IP67 0 (10) - 300mm ±0.03mm 0.01mm 380 w/ offset/preset funtion for esy ID mesurement, IP67 0 (20) - 450mm ±0.05mm 0.01mm 1,110 0 (20) - 600mm ±0.05mm 0.01mm 1,290 0 (20) mm ±0.07mm 0.01mm 3,350 *( ): Minimum imension in ID mesurement Inh/ Rnge* Digitl moel Orer No. Aury Resolution Mss (g) Remrks 0 (.4 ) - 8" / 0 (10) - 200mm ±.001".0005 / 0.01mm 180 IP67 0 (.4 ) - 12" / 0 (10) - 300mm ±.0015".0005 / 0.01mm 380 w/ offset/preset funtion for esy ID mesurement, IP67 0 (.5 ) - 18" / 0 (20) - 450mm ±.002".0005 / 0.01mm 1,110 0 (.5 ) - 24" / 0 (20) - 600mm ±.002".0005 / 0.01mm 1,290 0 (1 ) - 40" / 0 (20) mm ±.003".0005 / 0.01mm 3,350 *( ): Minimum imension in ID mesurement with metri/metri ul sle Rnge* Orer No. Aury Grution Mss (g) Remrks 0 (20) - 450mm ±0.10mm 0.02mm 1,100 0 (20) - 600mm ±0.10mm 0.02mm 1,300 0 (20) mm ±0.15mm 0.02mm 3,350 0 (20) mm ±0.22mm 0.05mm 4,850 0 (20) mm ±0.28mm 0.05mm 10,000 *( ): Minimum imension in ID mesurement DIMENSIONS Roun surfe of jws for urte ID mesurement ( ): Digitl moels Rnge 0-8"/ 0-200mm 288 (290) " / 0-300mm " / 0-450mm " / 0-600mm " / mm D-15

ong Jw Vernier Cliper SERIES 534 ong jws for mesuring hr-to-reh fetures. Supplie in fitte wooen se. 534-110 534-114 with metri/metri ul sle without fine justment Rnge* Orer No.

Aury Grution Mss (g) ower Sle Upper Sle 0 (10) - 300mm 534-113 ±0.04mm 0.02mm 0.02mm 460 0 (20) - 500mm 534-114 ±0.06mm 0.02mm 0.02mm 1,500 0 (20) - 750mm 534-115 ±0.08mm 0.02mm 0.02mm 2,900 0 (20) - 1000mm 534-116 ±0.

16 ong Jw Vernier Cliper SERIES 534 ong jws for mesuring hr-to-reh fetures. Supplie in fitte wooen se with metri/metri ul sle without fine justment Rnge* Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (10) - 300mm ±0.07mm 0.05mm 0.05mm (20) - 500mm ±0.13mm 0.05mm 0.05mm 1,400 *( ): Minimum imension in ID mesurement Rnge* with metri/metri ul sle Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (10) - 300mm ±0.04mm 0.02mm 0.02mm (20) - 500mm ±0.06mm 0.02mm 0.02mm 1,500 0 (20) - 750mm ±0.08mm 0.02mm 0.02mm 2,900 0 (20) mm ±0.10mm 0.02mm 0.02mm 3,500 *( ): Minimum imension in ID mesurement /Inh with metri/inh ul sle Rnge* Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (10) - 300mm / 0 (.3 ) - 12" ±0.07mm 0.05mm 1/ (10) - 300mm / 0 (.3 ) - 12" ±0.04mm 0.02mm (20) - 500mm / 0 (.8 ) - 20" ±0.13mm 0.05mm 1/128 1,500 0 (20) - 500mm / 0 (.8 ) - 20" ±0.06mm 0.02mm.001 1,500 0 (20) - 700mm / 0 (.8 ) - 30" ±0.16mm 0.05mm 1/128 2,900 0 (20) - 700mm / 0 (.8 ) - 30" ±0.08mm 0.02mm.001 2,900 0 (20) mm / 0 (.8 ) - 40" ±0.20mm 0.05mm 1/128 3,500 0 (20) mm / 0 (.8 ) - 40" ±0.10mm 0.02mm.001 3,500 *( ): Minimum imension in ID mesurement Inh Rnge* with inh/inh ul sle Orer No. Aury Grution Mss (g) ower Sle Upper Sle 0 (.3 ) - 12" ±.002" (.8 ) - 20" ±.003" (.8 ) - 30" ±.004" (.8 ) - 40" ±.004" *( ): Minimum imension in ID mesurement Aury: Refer to the list of speifitions. Grution: Refer to the list of speifitions. DIMENSIONS Rnge e 0-12 / 0-300mm / 0-500mm / 0-750mm / mm Roun surfe of jws for urte CD mesurement e D-16

17 ABSOUTE Digimti & Vernier Cliper SERIES 551 with Ni Style n Stnr Jws The roune fes of the jws re iel for urte ID (insie imeter) mesurement. Prllx-free vernier sle type is ville for esy n positive mesurement. With SPC output. Supplie in fitte plsti holster in rton. 18" / 450mm n lrger supplie wooen se. Vernier grution Aury: Refer to the list of speifitions. Resolution: 0.01mm or.0005"/0.01mm Disply: CD ength stnr: ABSOUTE eletrostti pitne type liner enoer Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 3.5 yers uner norml use Min sle grutions Prllel sle fes Funtion of Digitl Moel Origin-set, Zero-setting, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (1m / 40 ) 05CZA625: SPC le with t swith (2m / 80 ) Rnge* Digitl moel Orer No. Aury Resolution Mss (g) Remrks 0 (10) - 200mm ±0.03mm 0.01mm 180 IP67 0 (10) - 300mm ±0.04mm 0.01mm 380 with offset/preset funtion for esy ID mesurement, IP67 0 (20) - 500mm ±0.06mm 0.01mm 1,060 0 (20) - 750mm ±0.06mm 0.01mm 1,410 0 (20) mm ±0.07mm 0.01mm 3,430 *( ): Minimum imension in ID mesurement Inh/ Rnge* Digitl moel Orer No. Aury Resolution Mss (g) Remrks 0 (.4 ) - 8" / 0 (10) - 200mm ±.001".0005 / 0.01mm 180 IP67 0 (.4 ) - 12" / 0 (10) - 300mm ±.002".0005 / 0.01mm 380 w/ offset/preset funtion for esy ID mesurement, IP67 0 (.5 ) - 20" / 0 (20) - 500mm ±.0025".0005 / 0.01mm 1,060 0 (.5 ) - 30" / 0 (20) - 750mm ±.0025".0005 / 0.01mm 1,410 0 (1 ) - 40" / 0 (20) mm ±.003".0005 / 0.01mm 3,430 *( ): Minimum imension in ID mesurement DIMENSIONS Series 551 / 533 Roun surfe of jws for urte ID mesurement R Rnge R 0-8" / 0-200mm " / 0-300mm " / 0-500mm " / 0-750mm " / mm D-17

Digimti Cron Fier Cliper SERIES 552 with optionl jw tthments ightweight Digimti Clipers tht employ CFRP (Cron Fier Reinfore Plstis) in the em n jws. Highly urle n esy to hnle.

) Preset funtion for setting esire strting point. With SPC t output. Speil moel ville with ermi jws whih re suitle for mesuring rsive n mgneti prouts. Supplie in fitte wooen se.

), 938882 Bttery life: Approx. 3,000 hours in ontinuous use 552-314-10 552-155-10 Rnge* Orer No. Aury Resolution Remrks 0(20)-450mm 552-302-10 +/-0.04mm 0.01mm 0(20)-450mm 552-150-10 +/-0.06mm 0.

18 Digimti Cron Fier Cliper SERIES 552 with optionl jw tthments ightweight Digimti Clipers tht employ CFRP (Cron Fier Reinfore Plstis) in the em n jws. Highly urle n esy to hnle. The rnge of pplitions n e expne y using the optionl tthments. Diret reout of ID mesurements from the CD. (Offset vlue n e set esily y pressing the Offset key.) Preset funtion for setting esire strting point. With SPC t output. Speil moel ville with ermi jws whih re suitle for mesuring rsive n mgneti prouts. Supplie in fitte wooen se. Aury: Refer to the list of speifitions. Resolution:.0005 /0.01mm or 0.01mm Disply: CD ength stnr: Eletrostti pitne type liner enoer Mx. response spee: 1600mm/s Bttery: SR44 (1 p.), Bttery life: Approx. 3,000 hours in ontinuous use Rnge* Orer No. Aury Resolution Remrks 0(20)-450mm /-0.04mm 0.01mm 0(20)-450mm /-0.06mm 0.01mm long jws 200mm 0(20)-450mm /-0.04mm 0.01mm ermi jws 0(20)-600mm /-0.04mm 0.01mm 0(20)-600mm /-0.06mm 0.01mm long jws 200mm 0(20)-600mm /-0.04mm 0.01mm ermi jws 0(20)-1000mm /-0.05mm 0.01mm 0(20)-1000mm /-0.07mm 0.01mm long jws 200mm 0(20)-1500mm /-0.09mm 0.01mm 0(20)-1500mm /-0.11mm 0.01mm long jws 200mm 0(20)-2000mm /-0.12mm 0.01mm 0(20)-2000mm /-0.14mm 0.01mm long jws 200mm *( ): Minimum imension in ID mesurement Funtion Origin-set, Zero-setting, Presetting, Offsetting, Dt hol, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) : Centerline tthments (mm)* : Centerline tthments (inh)* : Pointe ID mesuring tthments (mm)* : Pointe ID mesuring tthments (inh)* : Atthment lmps (for moels up to 24 / 600mm rnge) : Atthment lmps (for moels over 24 / 600mm rnge) * Atthment lmps re require n not ville for long jw type. Inh/ Rnge* Orer No. Aury Resolution Remrks 0(.5 ) / /0.01mm 0(.5 ) / /0.01mm long jws 7.9 0(.5 ) / /0.01mm ermi jws 0(.5 ) / /0.01mm 0(.5 ) / /0.01mm long jws 7.9 0(.5 ) / /0.01mm ermi jws 0(1 ) / /0.01mm 0(1 ) / /0.01mm long jws 7.9 0(1 ) / /0.01mm 0(1 ) / /0.01mm long jws 7.9 0(1 ) / /0.01mm 0(1 ) / /0.01mm long jws 7.9 *( ): Minimum imension in ID mesurement Centerline Atthments Pointe ID Mesuring Atthments Atthment Clmps D-18

552-151-10 Cermi jws Centerline tthments ID point tthments DIMENSIONS AND MASS e Stnr

100 f Stnr moels, Cermi jw moels 10 Rnge e f Mss (g) 0-18" / 0-450mm 640 100 18 41.2 91.

8 113.8 32 10 (.5") 1,760 0-60" / 0-1500mm 1740 150 24 62.8 113.8 32 10 (.5") 2,160 50 1 0-80" / 0-2000mm 2250 150 24 62.

5") 2,560 ( ): inh/mm moels Interhngele jw moels 10 ong jw moels Rnge e f Mss (g) 0-18" /

8 32 10 (.5") 2,090 0-60" / 0-1500mm 1790 200 24 110 113.8 32 10 (.5") 2,490 10 1 0-80" / 0-2000mm 2300 200 24 110 113.

19 Cermi jws Centerline tthments ID point tthments DIMENSIONS AND MASS e Stnr moels Cermi jw moels ong jw moels Pointe ID Mesuring Atthments Centerline Atthments f f Stnr moels, Cermi jw moels 10 Rnge e f Mss (g) 0-18" / 0-450mm (.25") " /0-600mm (.25") " / mm (.5") 1, " / mm (.5") 2, " / mm (.5") 2,560 ( ): inh/mm moels Interhngele jw moels 10 ong jw moels Rnge e f Mss (g) 0-18" / 0-450mm (.25") 1, " / 0-600mm (.25") 1, " / mm (.5") 2, " / mm (.5") 2, " / mm (.5") 2,890 ( ): inh/mm moels 40 e D-19

20 ABSOUTE Coolnt Proof Cron Fier Cliper SERIES 552 with Interhngele Jws The rnge of pplitions n e expne y using interhngele jws (optionl). Quik n esy exhnging of jws ue to the unique lmping mehnism. (A pir of lmping wheels is stnr essory.) Provie with preset funtion for setting esire strting point, whih llows iret reout of offset mesurements. SPC t output with optionl interhngele jws Inh/ Rnge Orer No. Aury 0-18" / 0-450mm ±.002" 0-24" / 0-600mm ±.002" 0-40" / mm ±.002" 0-60" / mm ±.004" 0-80" / mm ±.005" Interhngele Jws (Optionl) Stnr type Insie point type Stnr Type Orer No. Components 07CZA056 Right (07CAA044), eft (07CAA045) 28mm (1.1") 30mm (1.2") Aury: Refer to the list of speifitions. Resolution:.0005"/0.01mm Disply: CD Sle type: ABSOUTE eletromgneti liner enoer Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 5,000 hours in ontinuous use Dust/Wter protetion level: IP66 Stnr essory: Jw lmps (2 ps.), 05GZA033 Insie Point Type Surfe Plte Type Srier Type ø Orer No. Components 07CZA058 07CZA041 x 2ps. 25mm 50mm 07CZA059 07CZA048 x 2ps. 1" 2" Srier Type Orer No. Components 07CZA055 Right (07CZA042), 8mm 30mm eft (07CZA043) 07CZA061 Right (07CZA042), eft (07CZA049) 031" 1.2" 30 Centerline Type ø1 ø 9 Surfe Plte Type Orer No. 07CZA " / 90mm 1.1" / 28mm Centerline Type Orer No. Components 07CZA057 07CZA039 x 2ps. 30mm 30mm 07CZA060 07CZA047 x 2ps. 1.2" 1.2" Funtions Origin-set, Zero-setting, Presetting, Offsetting, Dt hol, Automti power on/off, Dt output, inh/mm onversion (inh/mm moels) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) 02AZD790A: SPC le for U-WAVE w/ t swith (160mm) D-20

ABSOUTE Bk-Jw Centerline Cliper SERIES 573 Center-to-Center & Ege-to-Center Types Speilly esigne to mesure the istne etween two enters or the istne from n ege to enter.

21 ABSOUTE Bk-Jw Centerline Cliper SERIES 573 Center-to-Center & Ege-to-Center Types Speilly esigne to mesure the istne etween two enters or the istne from n ege to enter. Provie with jws on the k of the slier, mesurements n e re esily y looking own. Diret reing of pith mesurements is ville ue to the offset vlue setting funtion. With SPC t output. Supplie fitte in wooen se. Aury: Refer to the list of speifitions. Resolution: 0.01mm Disply: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 3.5 yers uner norml use Funtion Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories : Dt hol unit : SPC le with t swith (1m) : SPC le with t swith (2m) (Center-to-enter type) (Ege-to-enter type) Center-to-enter istne type Rnge Orer No. Aury Resolution Mss (g) mm ±0.10mm 0.01mm mm ±0.15mm 0.01mm 578 DIMENSIONS Ege-to-enter istne type Rnge Orer No. Aury Resolution Mss (g) mm ±0.10mm 0.01mm mm ±0.15mm 0.01mm ø1 ø1 ø10 ø / / D-21

Offset Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Min sle jw n slie up n own to filitte mesurement of steppe setions. (Hr-to-get-t imensions suh s A, B, C n e urtely mesure.) With epth r.

22 Offset Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Min sle jw n slie up n own to filitte mesurement of steppe setions. (Hr-to-get-t imensions suh s A, B, C n e urtely mesure.) With epth r. With SPC t output. (Series 573) Supplie in fitte plsti se Rnge Digitl moel Orer No. Aury Resolution Mss (g) 0-150mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm mm ±0.03mm 0.01mm Aury: Refer to the list of speifitions. Resolution*:.0005"/0.01mm or 0.01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m ) 05CZA625: SPC le with t swith (80 / 2m) Rnge Orer No. Aury Grution Mss (g) 0-150mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm 400 Inh/ Digitl moel Rnge Orer No. Aury Resolution Mss (g) 0-6" / 0-150mm ±.001".0005 / 0.01mm " / 0-200mm ±.001".0005 / 0.01mm " / 0-300mm ±.0015".0005 / 0.01mm 350 DIMENSIONS A B C Vernier moel Digitl moel Rnge 0-6 / 0-150mm (30) 0-8 / 0-200mm (38.5) 0-12 / 0-300mm ( ) Digitl Moel D-22

t t Offset Centerline Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Speilly esigne for enter to enter istne mesurements on the sme n offset plnes. Cn lso mesure from ege to enter.

01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), 938882 Bttery life*: Approx. 3.

omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) 573-605 Rnge Digitl moel Orer No.

23 t t Offset Centerline Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Speilly esigne for enter to enter istne mesurements on the sme n offset plnes. Cn lso mesure from ege to enter. Hole imeter shoul e in the rnge of 1.5mm - 10mm (.06" -.4"). With SPC t output. (Series 573) Supplie in fitte plsti se. Aury: Refer to the list of speifitions. Resolution*:.0005 /0.01mm or 0.01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) Rnge Digitl moel Orer No. Aury Resolution Mss (g) mm ±0.03mm 0.01mm mm ±0.03mm 0.01mm mm ±0.04mm 0.01mm 320 Inh/ Digitl moel Rnge Orer No. Aury Resolution Mss (g).4-6" / mm ±.0015".0005 / 0.01mm " / mm ±.0015".0005 / 0.01mm " / mm ±.0015".0005 / 0.01mm 320 Rnge Orer No. Aury Grution Mss (g) mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm DIMENSIONS ø1 10 ø1 Vernier moel ø1 10 Digitl moel Rnge t 0-6 / 0-150mm / 0-200mm / 0-300mm D-23

Point Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Nrrow tip jws fit into very smll grooves n trks, mking mny previously iffiult outsie mesurements fr esier to otin. With epth r.

24 Point Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Nrrow tip jws fit into very smll grooves n trks, mking mny previously iffiult outsie mesurements fr esier to otin. With epth r. With SPC t output. (Series 573) Supplie in fitte plsti se DIMENSIONS Rnge Digitl moel Orer No. Aury Resolution Mss (g) 0-150mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm 163 Inh/ Digitl moel Rnge Orer No. Aury Resolution Mss (g) 0-6" / 0-150mm ±.001".0005 / 0.01mm " / 0-150mm ±.001".0005 / 0.01mm 163 Rnge Orer No. Aury Grution Mss (g) 0-150mm ±0.05mm 0.05mm 150 Aury: Refer to the list of speifitions. Resolution*:.0005 /0.01mm or 0.01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) , , D-24

5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue

25 Ble Type Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Aury: Refer to the list of speifitions. Resolution*:.0005 /0.01mm or 0.01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) The thin le type jws fit into very smll grooves n mking previously iffiult outsie mesurements fr esier to otin. The OD mesuring fes re rietippe. With epth r. With SPC t output. (Series 573) Supplie in fitte plsti se Rnge Digitl moel Orer No. Aury Resolution Mss (g) 0-150mm ±0.02mm 0.01mm 168 Inh/ Digitl moel Rnge Orer No. Aury Resolution Mss (g) 0-6" / 0-150mm ±.001".0005 / 0.01mm 168 Rnge Orer No. Aury Grution Mss (g) 0-150mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm 340 DIMENSIONS 3.5 t 40 Vernier moel Digitl moel Rnge t 0-6 / 0-150mm mm mm D-25

Nek Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Point jw type n mesure wll thikness insie ores n reesses. Flt jw type n mesure grooves n reesses. With SPC t output.

01mm 157 0-150mm 573-652* ±0.03mm 0.01mm 157 *Point jw type Aury: Refer to the list of speifitions. Resolution*: 0.01mm or.0005"/0.01mm Grution**: 0.

26 Nek Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type Point jw type n mesure wll thikness insie ores n reesses. Flt jw type n mesure grooves n reesses. With SPC t output. (Series 573) Supplie in fitte plsti se Point jw type Rnge Digitl moel Orer No. Aury Resolution Mss (g) 0-150mm ±0.03mm 0.01mm mm * ±0.03mm 0.01mm 157 *Point jw type Aury: Refer to the list of speifitions. Resolution*: 0.01mm or.0005"/0.01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (1m / 40 ) 05CZA625: SPC le with t swith (2m / 80 ) Inh/ Rnge Digitl moel Orer No. Aury Resolution Mss (g) 0-6" / 0-150mm ±.0015".0005 / 0.01mm " / 0-150mm * ±.0015".0005 / 0.01mm 157 *Point jw type Rnge Orer No. Aury Grution Mss (g) 0-150mm ±0.05mm 0.05mm mm * ±0.05mm 0.05mm 140 *Point jw type DIMENSIONS , Point jw type Point jw type , D-26

Tue Thikness Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type The min sle jw is roun r tht filittes mesurements of tue wll thikness. With SPC t output.

response spee*: Unlimite Bttery*: SR44 (1 p.), 938882 Bttery life*: Approx. 3.

voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) 573-761 536-161 Digitl

27 Tue Thikness Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type The min sle jw is roun r tht filittes mesurements of tue wll thikness. With SPC t output. (Series 573) Supplie in fitte plsti se. Aury: Refer to the list of speifitions. Disply*: CD ength stnr: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only)) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) Digitl moel Rnge Orer No. Aury Resolution 0-150mm ±0.05mm 0.01mm DIMENSIONS AND MASS Inh/ Digitl moel Rnge Orer No. Aury Resolution 0-6" / 0-150mm ±.002".0005" / 0.01mm Rnge Orer No. Aury Grution 0-150mm ±0.05mm 0.05mm (32) More thn ø3 40 Mss: 150g Vernier moel ø (32) 40 Mss: 167g Digitl moel ø3 D-27

ABSOUTE ow Fore Cliper SERIES 573 Due to the low mesuring fore these lipers re iel for elsti or resilient workpiees suh s plsti prts n DIMENSIONS AND MASS ruer prts tht stnr lipers nnot mesure.

Aury Resolution Mss (g) 0-7" / 0-180mm 573-291-20 ±.002".0005 / 0.01mm 253 Aury: Refer to the list of speifitions. Resolution:.0005 /0.01mm or 0.

28 ABSOUTE ow Fore Cliper SERIES 573 Due to the low mesuring fore these lipers re iel for elsti or resilient workpiees suh s plsti prts n DIMENSIONS AND MASS ruer prts tht stnr lipers nnot mesure. With SPC t output. Supplie in fitte plsti se Rnge Orer No. Aury Resolution Mss (g) 0-180mm ±0.05mm 0.01mm 253 Inh/ Rnge Orer No. Aury Resolution Mss (g) 0-7" / 0-180mm ±.002".0005 / 0.01mm 253 Aury: Refer to the list of speifitions. Resolution:.0005 /0.01mm or 0.01mm Disply: CD ength stnr: ABSOUTE eletrostti pitne type liner enoer Mesuring fore: 0.49N to 0.98N (50gf to 100gf) Jw retrtion: 0.3mm Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 3.5 yers uner norml use Funtion Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories : Dt hol unit : SPC le with t swith (40 / 1m) : SPC le with t swith (80 / 2m) The ABSOUTE Digimti snp liper fetures spring-loe mehnism to llow quik n effiient GO/NO-GO Mss: 253g ABSOUTE Snp Cliper SERIES 573 inspetion for mss proution prts. With SPC t output. Supplie in fitte plsti se. Mesurement proeures To mesure resilient workpiees tke the mesurement when the pointer is etween the two inex lines DIMENSIONS AND MASS 27.5 Rnge Orer No. Aury Resolution Mss (g) 0-100mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm 233 Inh/ Rnge Orer No. Aury Resolution Mss (g) 0-4 / 0-100mm ±.001".0005 / 0.01mm " / 0-150mm ±.001".0005 / 0.01mm 233 Rnge Mss (g) 0-100mm mm Aury: Refer to the list of speifitions. Resolution:.0005 /0.01mm or 0.01mm Repetility:.0005 / 0.01mm Disply: CD ength stnr: ABSOUTE eletrostti pitne type liner enoer Mesuring fore: 7N to 14N (700gf to 1400gf) Jw retrtion: 2mm Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 3.5 yers uner norml use Funtion Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories : Dt hol unit : SPC le with t swith (40 / 1m) : SPC le with t swith (80 / 2m) D-28

Sriing Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type The rie-tippe jws filitte fine sriing on workpiee. With epth r. With SPC t output. (Series 573) Supplie in fitte plsti se.

29 Sriing Cliper SERIES 573, 536 ABSOUTE Digimti n Vernier Type The rie-tippe jws filitte fine sriing on workpiee. With epth r. With SPC t output. (Series 573) Supplie in fitte plsti se. Aury: Refer to the list of speifitions. Disply: CD ength stnr: ABSOUTE eletrostti pitne type liner enoer Mx. response spee: Unlimite Bttery: SR44 (1 p.), Bttery life: Approx. 3.5 yers uner norml use Funtion Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Optionl Aessories 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) Rnge Digitl moel Orer No. Aury Resolution Mss (g) 0-150mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm mm ±0.03mm 0.01mm 345 Rnge Vernier type Orer No. Aury Grution Mss (g) 0-150mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm 355 DIMENSIONS e Rnge e 0-150mm mm mm D-29

ABSOUTE Insie Cliper SERIES 573, 536 Knife-ege/Insie Groove/Point Jw Type Speilly esigne for insie mesurements in hr-to-reh ples. Knife-ege type With SPC t output.

omposition error Point jw type 536-145 Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) 573-746 536-146 Rnge Digitl moel Orer No.

30 ABSOUTE Insie Cliper SERIES 573, 536 Knife-ege/Insie Groove/Point Jw Type Speilly esigne for insie mesurements in hr-to-reh ples. Knife-ege type With SPC t output. (Series 573) Supplie in fitte plsti se. 18 / 450mm n 24 / 600mm supplie in wooen se Insie groove type Aury: Refer to the list of speifitions. Resolution*:.0005 /0.01mm / 0.01mm Grution**: 0.05mm Disply*: CD ength stnr*: ABSOUTE eletrostti pitne type liner enoer Mx. response spee*: Unlimite Bttery*: SR44 (1 p.), Bttery life*: Approx. 3.5 yers uner norml use *Digitl moels **Anlog moels Funtion of Digitl Moel Origin-set, Zero-setting, Power On/Off, Dt output, inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Point jw type Optionl Aessories for Digitl Moel 05CZA624: SPC le with t swith (40 / 1m) 05CZA625: SPC le with t swith (80 / 2m) Rnge Digitl moel Orer No. Aury Remrks Mss (g) mm ±0.05mm Knife-ege type, Mesurle min. hole imeter: ø10mm mm ±0.05mm Insie groove type, Mesurle min. hole imeter: ø10mm mm ±0.03mm Point jw type, Mesurle min. hole imeter: ø20mm 157 Knife-ege type Insie groove type Inh/ Rnge Digitl moel Orer No. Aury Remrks Mss (g).4" - 8" / mm ±.002" Knife-ege type, Mesurle min. hole imeter: ø.4" 227.4" - 6" / mm ±.002" Insie groove type, Mesurle min. hole imeter: ø.4" 147.8" - 6" / mm ±.0015" Point jw type, Mesurle min. hole imeter: ø.8" 157 Rnge Orer No. Aury Remrks Mss (g) mm ±0.12mm Knife-ege type, Mesurle min. hole imeter: ø10mm mm ±0.05mm Insie groove type, Mesurle min. hole imeter: ø10mm mm ±0.05mm Point jw type, Mesurle min. hole imeter: ø20mm mm ±0.08mm Point jw type, Mesurle min. hole imeter: ø30mm mm ±0.10mm Point jw type, Mesurle min. hole imeter: ø70mm 1, mm ±0.12mm Point jw type, Mesurle min. hole imeter: ø70mm 1,430 Point jw type More thn ø20 D-30

31 DIMENSIONS AND MASS Knife-ege type Mss: 210g Mss: 223g / (D) (H) Mss: 130g Mss: 143g / (H) R5 R5 R5 R5 3 (I) 3 () ø0.5 (ø1) 16 X X Setion X X Setion X X ø X X Insie groove type 25 Point jw type g f e 60 ø2.4(ø5) ø2.4 Orer No. Rnge e f g Mss (g) mm mm mm , mm ,430 Mss: 153g / D-31

MyCA-ite SERIES 700 Digitl Cliper for DIY The MyCA-ite is n iel mesuring tool for DIY. The CD sreen llows error-free reout of mesurements. With epth mesuring r. Inh/ Rnge Orer No.

5 700-113-10 700-123-10 231 (287) 16 Aury: Refer to the list of speifitions. Resolution:.001 / 0.1mm Disply: CD ength stnr: Eletrostti pitne type liner enoer Mx.

2 yers uner norml use Funtion Zero-setting, Power on/off inh/mm onversion Alrm: ow voltge, Counting vlue omposition error 40 ( ): 8" Moel Plsti Cliper SERIES 700 Digitl Cliper for DIY

1mm Disply: CD ength stnr: Eletrostti pitne type liner enoer Mx. response spee: 1800mm/s Bttery: SR44 (1 p.), 938882 Bttery life: Approx.

32 MyCA-ite SERIES 700 Digitl Cliper for DIY The MyCA-ite is n iel mesuring tool for DIY. The CD sreen llows error-free reout of mesurements. With epth mesuring r. Inh/ Rnge Orer No. Aury Mss (g) 0-6 / 0-150mm ±.005 / ±0.2mm / 0-200mm ±.005 / ±0.2mm 170 DIMENSIONS (287) 16 Aury: Refer to the list of speifitions. Resolution:.001 / 0.1mm Disply: CD ength stnr: Eletrostti pitne type liner enoer Mx. response spee: 1800mm/s Bttery: SR44 (1 p.), Bttery life*: Approx. 2 yers uner norml use Funtion Zero-setting, Power on/off inh/mm onversion Alrm: ow voltge, Counting vlue omposition error 40 ( ): 8" Moel Plsti Cliper SERIES 700 Digitl Cliper for DIY Plsti onstrution for urle n lightweight use. Also iel for use in, woo-shop, nursery, otor's, offie, et. Aury: Refer to the list of speifitions. Resolution:.001 /0.1mm or 0.1mm Disply: CD ength stnr: Eletrostti pitne type liner enoer Mx. response spee: 1800mm/s Bttery: SR44 (1 p.), Bttery life: Approx. 2 yers uner norml use Funtion Zero-setting, Power on/off inh/mm onversion (on inh/metri moels only) Alrm: ow voltge, Counting vlue omposition error Rnge Orer No. Aury 0-150mm ±0.2mm 0-150mm * ±0.5mm *Deep throt type without insie mesuring jws. Inh/ Rnge Orer No. Aury 0-6 / 0-150mm ±.008" / ±0.2mm (60) (14.2) (34) DIMENSIONS (60) (34) (14.2) , D-32

Center ine Gge Optionl Aessories for Cliper Fetures Pirs of onil proes re speilly esigne for Digimti, Dil n Vernier lipers to

Dimensions 050001 Applition for 4, 6 n 8 Vernier, Dil n Digimti Clipers, requiring imensions over.375.

Desription 050001 For 4, 6 n 8 Clipers 050018 For 12 Clipers A B C A B C 050001.375

154 Depth Bse Atthment Optionl Aessories for Cliper For 4, 6, 8, 12 / 100mm, 150mm, 200mm, 300mm, vernier, il n igitl lipers

33 Center ine Gge Optionl Aessories for Cliper Fetures Pirs of onil proes re speilly esigne for Digimti, Dil n Vernier lipers to quikly mesure enterline istnes. Dimensions Applition for 4, 6 n 8 Vernier, Dil n Digimti Clipers, requiring imensions over Applition for 12 Vernier, Dil n Digimti Clipers requiring imensions over.5. Speifitions Center ine Gge Orer No. Desription For 4, 6 n 8 Clipers For 12 Clipers A B C A B C Depth Bse Atthment Optionl Aessories for Cliper For 4, 6, 8, 12 / 100mm, 150mm, 200mm, 300mm, vernier, il n igitl lipers whih hve epth mesuring r. Finely groune se surfe n seure loking lmp. Inh/ Size Orer No. Remrks (pplile mesuring rnge of liper) 3 / 75mm , 6, 8 / 100mm, 150mm, 200mm 4 / 100mm , 6, 8 / 100mm, 150mm, 200mm 5 / 125mm / 300mm DIMENSIONS Depth se tthment e Size e t 3 / 75mm / 100mm / 125mm t: Bse thikness D-33

New Products. Small Tool Instruments and Data Management. Abzar Tejarat : INDEX. Micrometers. Coolant Proof Micrometer

New Products. Small Tool Instruments and Data Management. Abzar Tejarat : INDEX. Micrometers. Coolant Proof Micrometer Smll Tool Instruments nd Dt Mngement Azr Tejrt : 66736774-66736726 INDEX Mirometer Quntu Mike Coolnt Proof Mirometer Digimti Mirometer Asolute Digimti Mirometers Quikmike Outside Mirometers Rthet Thimle