Features. Multi mover available. High tensile timing belt. Customized options. Easy maintenance. 5 Drive pulley (0:Standard, 2:Shaft type)
|
|
|
- Kory Rich
- 5 years ago
- Views:
Transcription
1 TPC motion MT 40, 60, 0, 0 Features Track roller guide & elt type unit Multi mover available Various axis combination High tensile timing belt Customized options Easy maintenance How to order MT 40 S E Sereis 2 40 / 60 / 0 / 0 5 Drive pulley (0:Standard, 2:Shaft type) TYPE MODEL Pulley direction Pulley type Customized code 3 Slider option S : Standard(4 roller bearings) T : S + 2 additional bearings H : S + 4 additional bearings Please contact us for additional quantity of slider 4 (Unit : mm) 40 : ~ 30 60/ 0 / 0 : ~ 00 Please contact us for longer stroke than standard Please contact us for customized pulley type 6 Color lank : White(outer) : lack (outer) racket of reducer (including coupling) lank : None TYPE MODEL SYMOL SIZE E2 62 E3 E asic option : TG, PLUS, SESME 6 MOTION CONTROL SYSTEM
2 MT Series Specifications MT specifications Specification MT40 MT60 MT0 MT0 Max speed Payload (kgf) 15 (horizontal) 15 (horizontal) 40 (horizontal) 0 (horizontal) Max. 30 Max. 00 Max. 00 Max. 00 Repeatability ± 0.05 ± 0.05 ± 0.05 ± 0.05 Diameter of pulley Ø 4.4 Ø.3 Ø 1.6 Ø Pulley action perimeter (mm/rev) No load torque (Nm) elt(lm guide)type elt(track roller guide)type elt RPP5 / W15 RPP5 / W25 RPP / W30 RPP / W LM Guide S : 4 roller bearing standard / H : S type + 4 roller bearings asic weight (kgf) Weight per 0mm stroke (kgf) Note) Customized options such as motor, raydent and LM guide are available. MT structure ~ ~ Size (mm, W x H) 40 x 60 x 9 0 x x Component list No Component name Material No Component name Material 1 Rail luminum alloy Slider block luminum alloy Shaft 40 Ø Ø earing steel Track roller earing steel 0 Ø12 0 Ø16 3 Pulley box luminum alloy 9 Washer - 4 earing - Wiper FELT 5 Timing pulley High carbon steel 11 Sealing EP 6 Timing belt Urethane 12 elt clip Carbon steel all Screw type Guide Type ccessory MOTION CONTROL SYSTEM TPC mechatronics corp 69
3 MT 40 MT40 ~ MT M5 TP DP x5 key 2-Ø5 H DP M5 TP DP12 Ø14 h Ø55 H 6 ST+140 (RIL LENGTH) M5 TP DP "" (M6 NUT SLOT) "" (M5 NUT SLOT) ST + 26 M5 TP DP Weight(kg) MT40 MOTION CONTROL SYSTEM
4 MT 60 MT Ø1 h MT60 ~ x6 key 6 2-Ø5 H DP 4-M TP DP M TP DP "" (M NUT SLOT) "" (M5 NUT SLOT) elt(lm guide)type elt(track roller guide)type ST + 3 Ø0 H 95 ST + (RIL LENGTH) M TP DP M TP DP Weight(kg) MT all Screw type Guide Type ccessory MOTION CONTROL SYSTEM TPC mechatronics corp 1
5 MT 0 MT0 ~ MT (S=5/1) Ø22 h 6x6 key 2-Ø6 H DP ST + 44 Ø1 H 130 ST (RIL LENGTH) "" (M NUT SLOT) "" (M5 NUT SLOT) Weight(kg) MT0 2 MOTION CONTROL SYSTEM
6 MT 0 MT0 MT0 ~ Ø32 h x key 2-Ø6 H DP M TP DP M12 TP DP20 (S=4/1) "" (M NUT SLOT) 16 (S=4/1) 1.1 "" (M NUT SLOT) elt(lm guide)type elt(track roller guide)type Ø140 H M12 TP DP Weight(kg) MT0 ST ST (RIL LENGTH) M12 TP DP all Screw type Guide Type ccessory MOTION CONTROL SYSTEM TPC mechatronics corp 3
MB series. MB 40/60/80/100-D (Custmized type)
MB series Various axis vombination are available and easy maintenance Improved RPP timing belt MB //0/ Basic slider block * Various length of slider based on customer's needs are available. * Customized
MS 60 S C D3 E2
MS series Rotating axis can be equipped on empty rail, so combination of moving and rotation is possible without additional parts. Better for longer axis with a pulley box on block Suitable for fixing
MZ series. MZ 40/60/80/100-D (costomized type) Slider on the top and bottom
MZ series Application with various axis combination is available Long life time Easy mounting with various mounting holes Built-in stainless steel cover for dust proof MZ /// Standard slider block * Various
Uniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
Compressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
Directional control - SRK series Solenoid valve
Directional control - series valve valve - 500, 700 Provide CD external dimension. SM SM SMU SMU Small size, big flow rate! high speed, react quickly ; ( Under 10 ms ) with indicator light and voltage
TKC / size : 40, 45, 50, 60, 80, 120, 140mm
TKC / size : 40, 45, 50, 60, 80, 120, 140mm Precise positioning control Hydraulic system replacement Applications : Electric press, electric lift, tilting, printing equipment, alignment equipment, automobile
Series Basic Type. ø10, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Series MY1B
MY Series asic Type ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 Series MY earing Minimizing the unit size (dimensions) and combination with other guides is possible. efore Operating Series MY Maximum llowable Moment/Maximum
Features. Specification. Model. Acting type. Tube I.D. (mm) Port size M3 0.5 M Medium. Ambient temperature
series PRE GRIPPER (2-inger) Order example HD 2R MODE TUE I.D. 8 12 16 2 PIPING TYPE lank: xial piping R: Side piping eatures ow profile design saves space and reduces bending moments, improved accuracy
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series
4 Assembly of Y axis
4 ssembly of Y axis List of components for Y axis 2 x Ø 8 mm x 340 mm smooth chrome rod 2 x M10 x 370 mm threaded rod 4 x M8 x 205 mm black threaded rod 1 x M3 x 16 mm - DIN-912 class 8.8 black screw 6
Any reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT RHL Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make
6 CAB & SEATS. Quality Suspension Seat. Quality Suspension Seat. Quality Suspension Seat. Quality Suspension Seat. Quality Suspension Seat
Flat Mounting Height djustment Flip-up rmrests Mounting for Seat elts S.1330 - lack Flat ack Flat & ngled Mounting Mounting for Seat elts S.1344 - lack Flat ack Flat Mounting Mounting for Seat elt S.07000
Cam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
UNP Series Pneumatic Power Clamp
Features Conforms to Standards Blade and foot mounting Fully adjustable opening angle Opening angle can be set with or without air pressure Unique linkage design ensures positional repeatability Linear
SECTION C Engine 5.4L (4V)
303-01C-i Engine 5.4L (4V) 303-01C-i SECTION 303-01C Engine 5.4L (4V) CONTENTS PAGE IN-VEHICLE REPAIR Timing Drive Components... 303-01C-2 303-01C-2 Engine 5.4L (4V) 303-01C-2 IN-VEHICLE REPAIR Timing
ANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Parallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
Round Type Hydraulic Cylinder
Round Type ydraulic Cylinder Series CM CQ Series CM CK C CM CS C2 C ominal pressure: 3. MPa ore size :,,, 233 3. MPa Round Type ydraulic Cylinder Series C M ø, ø, ø, ø With uto Switch ow to Order CM L
with MR rail and R, R.T, R.S sliders
inear Roller earing ystem with MR rail and R, R.T, R. sliders N R R R N The MR eries inear Rail ystem consists of a -section steel rail with internal convex raceways, where robust double row ball bearing
Heavy-Line. GU System
GU ystem Guide rails GU..M, GU..MT GU...MT 90 ± 0' G H c h g sm b + 0,05 D I I GU...M 90 ± 5' L 0,02 H c h b + 0,05 0, 0,02 The longitudinal slot, made with + 0.05 tolerance, permits using reference elements
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
Guide Cylinder MGG. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. Integration of a basic cylinder and guide rods
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 46-54 www.cmafh.com Guide Cylinder Series MGG ø, ø, ø, ø, ø, ø, ø, ø Integration of a basic cylinder and guide
Electric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
SAMICK LINEAR BUSHING
Linear Bushing SAMICK LINEAR BUSHING SAMICK Linear Bushing, LM type is the linear motion system with unlimited stroke by applying with LM shaft. Because of the point contact between Balls and LM shaft,
DHDB. Free pass possible!
Overview/Configuration/Ordering www.festo.co.kr/amiproduct Horizontal stopper cylinders Piston diameter 50 mm Stroke length 50 mm Lever return force 16N Double-acting Position sensing Flexible cushioning
Corrected Load Torque= Load torque applied to gearbox X Service factor (See Table 1) Service factors (Sf)
Selection Guide Selection Guide Essential data for selection Load torque, type of prime mover, input speed, speed ratio, running time, coupling method, and frequency of start and stop. Selection Procedure
Any reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
w w w. intellige n t a c t u a t o r. d e Flexible Belt Drive Linear Axes System FS
G Flexible elt rive inear xes System Freely onfigurable ctuator & Guide Modules for Single or Multiaxis Systems w w w. intellige n t a c t u a t o r. d e Flexible elt rive inear xes System ctuator Module
AV Series Dynamic Mount
60 AV Series Dynamic Mount Tilt and swivel Compact Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Consistent repeatable operation Factory
Finding Top Center Position for No. 1 Piston. Set The Top Center Position By Temporary Marks On Type 1 Engines and 9RM Engines
Page 1 of 14 Finding Top Center Position for No. 1 Piston Set The Top Center Position By Temporary Marks On Type 1 Engines and 9RM Engines Various Fuel Injection Pumps may be equipped to the engine. Delphi
Pneumatic toggle presses
The accessories Pneumatic toggle presses P*L and VL range The optimum transmission ratio of the toggle lever produces large forces at the end of the stroke and ensures low air consumption. The resulting
How to Order. Manual release type. Lock position. H Head end lock. With rod boot. Nil J K M9NWV M9NW H7C M9PWV M9PW M9BWV M9BW M9NAV M9NA M9PAV M9PA
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (0) - www.cmafh.com CDG1 With auto switch (uilt-in magnet) Mounting style asic style L xial foot style F Rod side
LINEAR ROLLER SYSTEM with MR rail and R, R.T, R.S sliders
NR R R N NR ROR YTM with MR rail and R, R.T, R. sliders The MR eries inear Rail ystem consists of a -section steel rail with internal convex raceways, where robust double row ball bearing rollers travel.
ROBO Cylinder Rotary Straight Motor Model 64mm Width 200V Servo Motor I N T P O. Notes on Selection. Deceleration Rated torque
Slider RCS2 Cylinder RCS2-RT6 SA4D : Aluminum base SS4D : Steel base Cylinder Rotary Straight Model mm Width 200V Configuration: RCS2 RT6 I 60 18 L Series Encoder Deceleration Ratio Compatible Cable Length
(RH FIXED TABLE SHOWN HERE) (PARTS FOR DOUBLE ROLLER TABLE ALSO SHOWN INSIDE)
S/N 101 TO 325 MANUFACTURED Y LASAR MFG EFORE 1988 (RH FIXED TALE SHOWN HERE) (PARTS FOR DOULE ROLLER TALE ALSO SHOWN INSIDE) American Meat Euipment Corp. 1625 S. Greenwood Ave Montebello, Ca. 90640 PH:
MCHG2 series MCHG2 16 M. PARALLEL GRIPPER (3-Finger) Features. Order example. Specification. Installation. Model. Model MM UU UA Bolt
MCHG2 series PARALLEL GRIPPER (3-inger) eatures Through holes in body enable simple mounting. Body manufactured from high tensile, anodised aluminum giving good resistance to corrosion. Available with
Features. Specification. Model. Tube I.D. (mm) Port size G1/8 G1/8 G1/4 G3/8. Medium. Ambient temperature.
series TIN-UID CYLINDR eatures The guide units can be assembled to cylinders that then conform to ISO6432. nti rotation guaranteed by use of external guide rods. our self lube bushes or linear bearings
LAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
rtisan Technology Group is your source for quality new and certified-used/pre-owned equipment FST SHIPPING ND DELIVERY TENS OF THOUSNDS OF IN-STOK ITEMS EQUIPMENT DEMOS HUNDREDS OF MNUFTURERS SUPPORTED
Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
High Speed Automation HZR Series za30
zla5 HZR Series za3 Features Designed as a vertical axis unit Load lifting capacities up to 15 kg Velocity up to 1 meters/sec. Positional repeatability of ±,2 mm Torsion-resistant housing Roller wheel
Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
otary lamp ylinder/standard Series MK ø, ø, ø, ø, ø, ø, ø5, ø ow to Order MK 1 3 S otary clamp cylinder Mounting Symbol Style ore size Through hole & both ends tapped (Standard) ø, ø oth ends tapped Through
How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil
With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the
Linear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
AK-G/AK-GB/AK-R/AK-RB Series
4mm/ 6mm/ 85mm Geared type/geared+rake built-in type 6mm Rotary actuator type/ Rotary actuator+rake built-in type Features Compact design and light weight with high accuracy, speed and torque Cost-effective
Precise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
REMOVAL AND INSTALLATION > HALFSHAFT
Page 1 of 14 2008 Lincoln MKZ 3.5L Eng Service Manual: REAR DRIVE HALFSHAFTS Print Date: REMOVAL AND INSTALLATION > HALFSHAFT Special Tools Illustration Tool Name Tool Number Front Hub Remover 205-D070
ZERO BACKLASH GEARING
ZERO BACKLASH GEARING Based on Nexen s innovative Roller Pinion technology, the Geared Bearing comes complete with a gear and a precision grade, high capacity bearing. With a wide range of sizes and ratios,
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
Linear Stages TS100 Series TS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Includes
SC series Stopper Cylinders
SERIES 60,000 PSI tensile strength electro-less nickel rod bearing High strength threaded connection Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover series Stopper Cylinders Common
Single-axis Robot. ISB/SSPA Series. S, M sizes added to the SSPA Series
Single-axis Robot I S C a s t IS/SSP Series S, M sizes added to the SSP Series w w w. i n t e l l i g e n t a c t u a t o r. c o m major revamp of the single-axis robot IS series with improvements all
SC series Stopper Cylinders
High strength threaded connection Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire 60,000 PSI tensile strength electro-less nickel rod bearing Low friction figure 8 piston seal
ATS100 Series. Mechanical Bearing, Ball-Screw Stage. Long life linear motion guide bearing system. Ultra-fine resolution. Integral bellows waycovers
ATS100 Series Mechanical Bearing, Ball-Screw Stage Long life linear motion guide bearing system Ultra-fine resolution Integral bellows waycovers Low profile, compact design Linear Stages ATS100 Series
Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
Actuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
Specifications. Model/Rated Flow Rate. Accessory/Option. Differential pressure indicator
Oil Filter FH150 Series RoHS ompact and lightweight The compact and lightweight design employs an aluminum alloy cover. Easy maintenance The element slides into place, making it easy to install and remove.
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
Port Rc(PT), G, NPT M5 M5 1/8" 1/8" 1/8" Stroke mm 2 ~ 6 2 ~ 8 2 ~ 10 2 ~ 13 2 ~ 16. Air Consumption cc/cycle
2GN Parallel gripper with 2 jaws Features Wedge type, 2-Jaw parallel gripper Improved stability with longer gripping point between jaw & plunger Improved function, sti ness and outer look Made with flexible
Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A
ø, ø, ø L F D Without auto switch With auto switch style asic style Axial foot style Rod side flange style Double clevis style (Except ø) ore size mm mm mm How to Order Standard stroke (mm) ø,,, ø,,,,
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Cam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
Take the guesswork out of lubricating blanks!
Take the guesswork out of lubricating blanks! omputer controlled for just the right amount of lubricant. Eliminates spray bottles, brushes and rollers. Ensures that every blank will be lubricated. Increases
1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
Round Type Hydraulic Cylinder
Round Type ydraulic Cylinder CM Series CQ CK C CM CS C C D- CM Series ominal pressure: 3. MPa ore size :,,, 3 3. MPa Round Type ydraulic Cylinder CM Series ø, ø, ø, ø pplicable uto Switches/Refer to pages
Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
Rotary actuator Rack & pinion type. Size: 8, 32, 63 Oscillating angle: 90, 180,
G V* H FH HP S2 H/ LH LHG HL/ HLG/ G HL HM G S *H H2 L2 N/ S/F Specifications escriptions Size ffective torque Note 1 N m ctuation Working fluid Max. working pressure MPa Min. working pressure Note 2 MPa
Specifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper
Angular Style Air Gripper Standard Type Series MHC2 Size: 10, 16, 20, 25 A large amount of gripping force is provided through the use of a double piston mechanism, while maintaining a compact design. Built-in
Industrial Robot. Technical Information. KK Series. SK Series. KA Series. KS Series. KU Series. KE Series. Appendix P. 01 P. 23 P. 33 P. 67 P.
Industrial Robot Technical Information KK Series P. 0 SK Series P. K Series P. 33 KS Series P. 67 KU Series P. 3 KE Series P. 6 ppendix P. 90 (The specifications in this catalogue are subject to change
for PowerCON SCARA MSEL-PCX/PGX Program Controllers PowerCON SCARAIXP Series Arm Length 180mm/250mm 550mm/650mm
PowerCON SCARAIXP Series Program Controllers for PowerCON SCARA MSEL-PCX/PGX Series added Arm Length 18mm/25mm 55mm/65mm www.intelligentactuator.com Introducing Arm Lengths 18/25/55/65 Added in Cost-effective
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
Dimensions: inch. Dimensions: mm
ER Submersible ropeller umps roject: : Chk d: Date: pply to 03, 0713, 0843, 3 ø (ole) 03- (8 OLES) 0713-710 0843-710 3-593 (12 OLES) H 10 20 25 25 120 ( 2) 3 /4 3 /4 3 /4 3 /4 34 1 /4 34 1 /4 34 1 /4 ump
ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
Product Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Roller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
MOPAR 383/440 MID MOUNT A/C KIT S C.I C.I.
3-30-15 MOPAR 383/440 MID MOUNT A/C KIT S 40565 383-400 C.I. 40570 440 C.I. ALTERNATOR - A/C BRACKET 40041-A.. 383 Alternator/A/C Bracket 40042-A.. 440 Alternator/A/C Bracket 40041-B.. Alt/A/C rear support
Catalogue. Portal Axes PAS
Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................
PRO225-HS (High Speed) Series
Linear Stages PRO225-HS (High Speed) Series Mechanical Bearing, Ball-Screw Stage Twelve models with travels from mm to 1500 mm More than 6X speed capability of the regular PRO series up to 1400 mm/s -seal
Linear Rotary Motors. Linear-Rotary Motors. The linear motor technology for industrial applications. Linear and rotary direct drive
Linear Rotary Motors Linear-Rotary Motors Linear and rotary direct drive Independent linear and rotary motion Synchronised linear and rotary motion Programmable press force up to 1 24N Programmable tightening
Linear Guide Units H01
inear Guide Units 01 ccurate guidance for unsupported loads Protection against external forces ow friction ball bearing version Plain bearing version for rough environment inmot the Technology for Industrial
OSP-P Series. Actuator Products Rodless Cylinders. Operating information. Material specifications. Features. Weight (mass) Size Comparison
Standard Features: Double-acting with adjustable cushions With magnetic piston for position sensing Standard stroke lengths to 6000mm. Long stroke versions available upon request End cap can be rotated
Compact Cylinder/Plate type
Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series
ECOLINE: AFFORDABLE AND INNOVATIVE LINEAR BEARINGS
ECOLINE: FFORDBLE ND INNOVTIVE LINER BERINGS ECOLINE s products have been designed to fit in applications where quality movement is needed at a low price. The patented design offers a well-protected, smooth
Old s 350 Rocket Mid Mount A/C Kit 16040
03/17/17 Old s 350 Rocket Mid Mount A/C Kit 16040 PARTS LIST 16018 Alt/AC Main Bracket 1-16018-A... Alt/AC Front Main Bracket 1-16018-B... Rear Support Bracket 1-20140-A... Alternator Re-Locator 1-740-A...
REMOVAL & INSTALLATION
REMOVAL & INSTALLATION TIMING BELT Removal 1. Disconnect negative battery cable. On Millenia, raise and support vehicle. Remove right front wheel. Remove lower engine covers. 2. On all models, remove accessory
Product series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders
The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The
5 Port Mechanical Valve Metal Seal. Specifications Fluid. Basic Roller lever. Mechanical operation. One way roller lever.
5 ort Mechanical Valve Metal Seal Compact design, large flow capacity 9.9 mm High cycle rate, long life/00 c.p.m. or less iping possible to any EXH port. roper countermeasures can be taken for applications
LA rails with. R.S series sliders. PA. series sliders ,5 37,2 24,3 28,20 18,30 14,8 18,2 28,2 28,6
Monorace RN 18 MR rails with R. series sliders. 37 24 16,5 MR rails with R.T series sliders. 37,2 24,3 18 MR rails with R. series sliders.,20 18,30 14,8 M rails with R series sliders. M rails with R. series
Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil.
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical () 4-4 www.cmafh.com With auto switch F G C D U CM CDM With auto switch (uilt-in magnet) Mounting style asic style
Compact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
What is Robo Cylinder?
RCS What is Robo Cylinder? Robo Cylinder is an electric actuator that employs ball screw, linear guide and AC Servo motor. Using the know-how obtained from manufacturing 150 thousand axis robots, while
Cam follower guide type. Series MY1C. Allowable moment Large. Bore size (mm) Air cushion (2)
Mechanically Jointed Rodless Cylinder Series MY igh ccuracy igh rigidity/igh precision guide type Series MYT MX MTS MY CY MG CX D- -X - Data igh precision guide type Series MY Cam follower guide type Series
ROBO Cylinder Rod type RCP2-RA8C/RA8R
ROBO Cylinder Rod type RCP2-/ w w w. i n t e l l i g e n t a c t u a t o r. c o m RA8 (-mm wide) actuators have been added to the ROBO Cylinder RCP2 series, rod type, to expand the lineup.