SAMICK LINEAR BUSHING

Size: px
Start display at page:

Download "SAMICK LINEAR BUSHING"

Transcription

1 Linear Bushing SAMICK LINEAR BUSHING SAMICK Linear Bushing, LM type is the linear motion system with unlimited stroke by applying with LM shaft. Because of the point contact between Balls and LM shaft, minimum friction can be acquired and that can give you the high precision motion. SAMICK Linear Bushing serves the alignment of the balls toward the LM Shaft by the single Retainer and cylindrical shape of Raceway. Outer Sleeve is made of high-carbon Chromium Bearing Steel, and inner and outer grinding processes are applied after Heat treatment. Interchangeability The Dimensions of SAMICK Linear Bushing are standardized to have full interchangeability. LM shaft is provided with the cylindrical grinding to have high precision fitting clearance. Rigid Outer Sleeve Hardened and Precisely ground Outer Sleeve is made of Bearing steel, and can be direct assembled with the needle bearing on outer surface. 46 Linear Bushing High precision Retainer The single body retainer guides 4~6 ball circuits, and it makes the precision guiding against the balls moving direction and smooth motion. LM Case Unit LM Case Unit, SC type is consist of the light Aluminum case and LM type Linear Bushing, so the assembly can be finished by simple bolting. Longer life can be obtained by adjusting the Ball circuit orientation of Linear Bushing against the direction of load. Application SAMICK Linear Bushing are widely used in Precision equipments; Computer and peripheral equipments, Measuring equipments, Auto recording equipments, and 3D measuring equipments, and Linear Motion systems in Machine for Mass Production; Multi-Axis Drilling machines, Punching Press, Tool Grinders, Auto-Gas cutters, printing machines, card selectors, food packing machines, and etc. Structure part Material Retainer 2 Ball 3 Outersleeve - POM - Stainless Steel - High carbon bearing seel - Stainless steel - Ceramic - High carbon bearing steel 1 Corrosion resistance plating available - NBR (Acrylonitrile Butadiene Rubber) 2 optional item 1 4 Seal

2 Linear Bushing Load rating and Travel Life The Load rating of SAMICK Linear Bushing can be affected by the balls orientation against the Load. The Basic Load rating in the table is the Load rating of Linear Bushing when 1 (one) Ball circuit are just beneath the load. As shown in Table, If the Ball are located on syetrical position against the Load, the Load rating will be increased and the travel life will be extended. Load ratings and Orientation of Balls Orientation of Balls No. of Ball Row 4 Row 5 Row 6 Row Max. Load Equation F = C F = C F = C Min. Load 48 Load & Travel Life Equation F = 1.41 C F = 1.46 C F = 1.26 C Basic Dynamic load rating(c) and travel life The travel life of a Linear Bushing is determined largely by the quality of the shaft. The Basic Dynamic load rating is maximum continuous load that can be applied to the Linear Bushing with 9% of reliability achieving after 5km traveling under normal conditions. The nominal travel life can be calculated by follow equation. L = [ C ] 3 5 P L1 = [ C1 ] 3 1 P L :Nominal life (basis:5km, unit: km ) L1 :Nominal life (basis:5km, unit: km ) C :Basic dynamic load rating(basis:5km, unit: N) C1 :Basic dynamic load rating(basis:1km, unit: N) P :Applied load Practically, other factors (Hardness factor, Load factor, Contact factor, etc) will affect the life as follows. L = [ fh ft fc C ] 3 5 fw P L1 = [ fh ft fc C1 ] 3 1 fw P fw fh ft fc :Load factor :Hardness factor :Temperature factor :Contact factor

3 CLOSED LINEAR BUSHING Drawing 12 Part Number Notation 2 UU - A N S European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from 8 to 25 only

4 CLOSED LINEAR BUSHING Resin PART NUMBER Steel dr. WORKING BORE DIAMETER D L B W D 1 BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 5UU UU 8-A UU 12-A UU 16-A UU 2-A UU 25-A UU UU UU UU Dynamic load rating is based on the nominal life of 5 km In case of 1 km, C on the table need to be divided by 1.26 Ex) 5 km basic dynamic load rating(c) of 12 = 41N 1 km basic dynamic load rating(c1) of 12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

5 _L LONG LINEAR BUSHING Drawing 14 -L Part Number Notation 2 L UU - A N S European Standard Samick Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from 8L to 25L only

6 _L LONG LINEAR BUSHING Resin PART NUMBER Steel dr. WORKING BORE DIAMETER D L B W D 1 BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 8LUU 8L-A LUU 12L-A LUU 16L-A LUU 2L-A LUU 25L-A LUU LUU LUU LUU L 1 Dynamic load rating is based on the nominal life of 5 km In case of 1 km, C on the table need to be divided by 1.26 Ex) 5 km basic dynamic load rating(c) of 12L = 65N 1 km basic dynamic load rating(c1) of 12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

7 _AJ ADJUSTABLE LINEAR BUSHING Drawing 16 -AJ Part Number Notation 2 UU AJ - A N S European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Linear Bushing Adjustable type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from 8AJ to 25AJ only

8 _AJ ADJUSTABLE LINEAR BUSHING Resin PART NUMBER Steel dr. WORKING BORE DIAMETER D 4 L B W D 1 h BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 5UUAJ UUAJ 8AJ-A UUAJ 12AJ-A UUAJ 16AJ-A UUAJ 2AJ-A UUAJ 25AJ-A UUAJ UUAJ UUAJ UUAJ AJ 1 Dynamic load rating is based on the nominal life of 5 km In case of 1 km, C on the table need to be divided by 1.26 Ex) 5 km basic dynamic load rating(c) of 12AJ = 41N 1 km basic dynamic load rating(c1) of 12AJ = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

9 _OP OPEN LINEAR BUSHING Drawing 18 -OP Part Number Notation 2 UU OP - N S European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Linear Bushing Open type Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

10 _OP OPEN LINEAR BUSHING PART NUMBER Resin dr. WORKING BORE DIAMETER D 4 L B W D 1 h θ BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF WEIGHT BALL (gf) 2 ROW 12UUOP UUOP UUOP UUOP UUOP UUOP UUOP UUOP OP 1 Dynamic load rating is based on the nominal life of 5 km In case of 1 km, C on the table need to be divided by 1.26 Ex) 5 km basic dynamic load rating(c) of 12OP = 41N 1 km basic dynamic load rating(c1) of 12OP = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

for YOU and YOUR customer by SAMICK . (499) CATALOG NO. 1601E

for YOU and YOUR customer by SAMICK . (499) CATALOG NO. 1601E . (499) 73-35-48 e-mail: samick-mail@ya.ru for YOU and YOUR customer by SAMICK CATALOG NO. 161E . (499) 73-35-48 e-mail: samick-mail@ya.ru The copyright of the contents of this publication is obtained

More information

for YOU and YOUR customer LINEAR BUSHING by SAMICK CATALOG NO. 1501E

for YOU and YOUR customer LINEAR BUSHING by SAMICK CATALOG NO. 1501E for YOU and YOUR customer LINER BUSHING by SMICK CTLOG NO. 151E The copyright of the contents of this publication is obtained by SMICK Precision Ind. Co., Ltd. Every care has been taken to ensure the contents

More information

Linear Bushing General Catalog

Linear Bushing General Catalog General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the... Structure and features... Dedicated Shafts for Model LM... Standard

More information

Linear Bushing. General Catalog A-523

Linear Bushing. General Catalog A-523 Linear Bushing General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Linear Bushing... Structure and features... Dedicated Shafts

More information

GM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type)

GM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type) Nippon Bearing has expanded the new generation GM Slide Bush series to now include the popular ouble-ide and Flange Types to provide an even wider selection of products. GM (single type) GM- (double-wide

More information

F-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT

F-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT SLIDE GUIDE BALL SPLIE ROTARY BALL SPLIE STROKE BALL SPLIE TOPBALL PRODUTS SLIDE BUSH SLIDE UIT SLIDE WAY/GOIO WAY MIIATURE SLIDE F- ATUATOR SLIDE SREW The B stroke bush is a linear and rotational motion

More information

SM 3 SM 3G SMS 3 SMS 3G

SM 3 SM 3G SMS 3 SMS 3G SM TYPE Standard Type This type is a metric dimension series widely used in Japan and other countries. part number structure example SMS 2 G UU - P specification SM standard SMS anticorrosion inner contact

More information

SWF TYPE. Round Flange Type. part number structure example SWSF 16 G UU. This type is an inch dimension series mainly used in the U.S.

SWF TYPE. Round Flange Type. part number structure example SWSF 16 G UU. This type is an inch dimension series mainly used in the U.S. SWF TYPE Round Flange Type This type is an dimension series mainly used in the U.S. part number structure example SWSF 16 G UU - SK specification SWF standard SWSF anticorrosion inner contact diameter

More information

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing

More information

HepcoMotion. Ball Bushings.

HepcoMotion. Ball Bushings. HepcoMotion Ball Bushings www.hepcomotion.com Contents HepcoMotion Super Ball Bushings 1 HepcoMotion Standard Ball Bushings 1 SBE Closed Super Ball Bushing 2 SBEO Open Super Ball Bushing 3 CS Closed Pillow

More information

E-1 SLIDE GUIDE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT SLIDE TABLE GONIO WAY

E-1 SLIDE GUIDE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT SLIDE TABLE GONIO WAY SLIDE GUIDE BALL SPLINE ROTARY BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GONIO WAY E-1 ACTUATOR SLIDE SCREW Table E-1 A wide variety

More information

TRANSLATION (OR LINEAR)

TRANSLATION (OR LINEAR) 5) Load Bearing Mechanisms Load bearing mechanisms are the structural backbone of any linear / rotary motion system, and are a critical consideration. This section will introduce most of the more common

More information

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

506E. LM Guide Actuator General Catalog

506E. LM Guide Actuator General Catalog LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6

More information

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam. Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely

More information

Technical Data, Dimensioning, Mounting

Technical Data, Dimensioning, Mounting 6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load

More information

Caged Ball LM Guide Actuator SKR

Caged Ball LM Guide Actuator SKR Caged Ball LM Guide Actuator SKR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.309-11E Integrated LM Guide and Ball Screw High-rigidity /

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at CATALOG No.

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at  CATALOG No. LM Guide HCR/HMG R Guide / Straight-Curved Guide Achieving a Simplified Mechanism For details, visit THK at www.thk.com Product information is updated regularly on the THK website., CATALOG No.306-8E HCR

More information

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN

More information

SV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5

SV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5 SV TYPE SV1/SV2 part number structure example SVS 2 6 - RAS 2Z - UP accuracy grade specification blank high SV standard P precision SVS anticorrosion UP high-precision number of rollers cage type blank

More information

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication

More information

Roller Follower General Catalog

Roller Follower General Catalog General Catalog A Product Descriptions Features and Types... A20-2 Features of the... A20-2 Structure and Features... A20-2 Types of the... A20-3 Types and Features... A20-4 Point of Selection... A20-6

More information

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions

More information

Precision Linear Pack

Precision Linear Pack Precision Linear Pack General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features... Features of the Precision Linear Pack... Structure and features... Rated Load

More information

BEARING UNITS BEARINGS LINEAR MOTION PRODUCTS

BEARING UNITS BEARINGS LINEAR MOTION PRODUCTS Motion Creator BEARING UNITS BEARINGS LINEAR MOTION PRODUCTS L ATELIER DE FABRICATION MANUFACTURING WORKSHOP 2 Multi spindle Machining Centers 2 Axis 4 Multi spindle machining Centers 3 Axis 2 Multi spindle

More information

SKF Inch Linear Bearing Series

SKF Inch Linear Bearing Series SKF Inch Linear Bearing Series Quick-ship Easy Serve Program from SKF Precision ground shaft Class L precision ground shaft from 1/4'' to 2'' Same day shipment 1-1 pieces (Order received by 12:N EST) 1-2

More information

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance

More information

Linear Bushings and Shafts. The Drive & Control Company

Linear Bushings and Shafts. The Drive & Control Company Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail

More information

10 Thrust ball bearings

10 Thrust ball bearings 10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings

More information

3. BEARING ARRANGEMENT DESIGN

3. BEARING ARRANGEMENT DESIGN 3. BEARING ARRANGEMENT DESIGN 3.1 GENERAL PRINCIPLES OF ROLLING BEARING ARRANGEMENT DESIGN Rotating shaft or another component arranged in rolling bearings is guided by them in radial as well as in axial

More information

NEEDLE ROLLERS. Polígono Indutrial O Rebullón s/n Mos - España -

NEEDLE ROLLERS. Polígono Indutrial O Rebullón s/n Mos - España - NEEDLE ROLLERS Needle rollers In certain applications, the limited amount of space available for bearings and the loads to be supported require the use of a full complement of needles independent of any

More information

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model

More information

LM Guide Radial Type Model SR

LM Guide Radial Type Model SR LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions

More information

Motion Technologies Bearing Products

Motion Technologies Bearing Products Page 1 of 12 Motion Technologies Bearing Products LARGE DIAMETER BEARINGS (conventional design) o Deep groove ball to 1900mm bore page 3 o Four point contact ball to 500mm bore page 3 o Single row angular

More information

Drawn cup needle roller bearings

Drawn cup needle roller bearings Drawn cup needle roller bearings Sealed drawn cup needle roller bearings... 78 Full complement drawn cup needle roller bearings... 79 3 Dimensions... 79 Tolerances... 79 Misalignment... 80 Cages... 80

More information

*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings

*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.

More information

Linear Bushings and Shafts

Linear Bushings and Shafts Linear Bushings and s R310EN 3100 (2004.09) The Drive & Control Company R310EN 3100 (2004.09) Linear Bushings Bosch Rexroth AG 3 Linear Bushings and s Selection Guide 9 Product Overview 10 Overall Dimensions

More information

GN Telescope-Linear motion bearings

GN Telescope-Linear motion bearings GN 2410 Telescope-Linear motion bearings technical informations Specification Rail / Runner Heat treatable steel - zinc plated, blue passivated - Raceways hardened Balls Anti-friction bearing steel, hardened

More information

Classification and Characteristics of Rolling Bearings

Classification and Characteristics of Rolling Bearings 1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates

More information

American Standard Linear Bearings Standard Type

American Standard Linear Bearings Standard Type American Linear Bearings Type LMB UU LMB UU LMB UU LMB UU LMB UU LMB UU LMB UU LMB UU LMB UU / / / / / / /...7.....7. No. of Dia Outer Dia Length Outer Locking Groove Rows dr D L B D W.7.7.........9.9...7...9.9...9.7.9..9..9.9................

More information

Rolling bearings Plain bearings Linear technology. Complete Wheelset BETTER COMPONENTS THROUGH SYSTEM UNDERSTANDING MOBILITY FOR TOMORROW

Rolling bearings Plain bearings Linear technology. Complete Wheelset BETTER COMPONENTS THROUGH SYSTEM UNDERSTANDING MOBILITY FOR TOMORROW Rolling bearings Plain bearings Linear technology Complete Wheelset BETTER COMPONENTS THROUGH SYSTEM UNDERSTANDING MOBILITY FOR TOMORROW System Understanding Picture: Siemens Advantages Efficient and reliable

More information

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Roller LM Guide Ultra-high Rigidity Type Model LM block LM rail End seal Endplate 45 45 Caged roller Roller 45 Cross section 45 * or the caged roller, see. Point of Selection A Point of Design Options

More information

LINEAR MOTION SYSTEM COMPONENTS

LINEAR MOTION SYSTEM COMPONENTS R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.

More information

LINEAR SYSTEMS LINEAR SYSTEM LB LINEAR SYSTEM LB MINITEC PROFILE SYSTEM

LINEAR SYSTEMS LINEAR SYSTEM LB LINEAR SYSTEM LB MINITEC PROFILE SYSTEM LINEAR SYSTEMS LINEAR SYSTEM LB BL me t s y s r aen i L LINEAR SYSTEM LB MINITEC PROFILE SYSTEM 285 LINEAR SYSTEMS LINEAR SYSTEM LB LINEAR SYSTEM LB The LB design is based on LME 20 linear ball bearings

More information

Guide plate. Fig. 1 Construction of Slide Pack Type FBW-RUU

Guide plate. Fig. 1 Construction of Slide Pack Type FBW-RUU A Slide Pack Slide Pack Type FBW Japanese patent No. 1696446 Overseas patent resistered in the U.S. Mounting plate Ball Slide rail Seal Guide plate Stopper Fig. 1 Construction of Slide Pack Type FBW-RUU

More information

Studying the Positioning Accuracy

Studying the Positioning Accuracy Ball Screw Studying the Positioning Accuracy Causes of Error in the Positioning Accuracy Point of Selection Studying the Positioning Accuracy The causes of error in the positioning accuracy include the

More information

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options

More information

corporation Needle Roller Bearings

corporation Needle Roller Bearings For New Technology Network R corporation Needle Roller Bearings & CONTENTS Technical Data A-158 Needle roller and cage assemblies B-32 Needle roller and cage assemblies for connecting rod bearings B-2128

More information

BESTSELLER. Linear bushings. Product properties:

BESTSELLER. Linear bushings. Product properties: are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall

More information

4 Self aligning ball bearings

4 Self aligning ball bearings Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed

More information

Cross Roller Guide/Ball Guide General Catalog

Cross Roller Guide/Ball Guide General Catalog General Catalog A Product Descriptions Features and Types... A7-2 Features of the.. A7-2 Structure and Features... A7-2 Types of the.. A7-3 Types and Features... A7-3 Point of Selection... A7-4 Rated Load

More information

Crossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way

Crossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way Crossed Roller Ways Description of each series and Table of dimensions Crossed Roller Way Page - to -7 Anti-Creep Cage Crossed Roller Way Page - to - Crossed Roller Way Unit Page - to - In the table of

More information

SSRB range with prefix and suffix

SSRB range with prefix and suffix SSRB range with prefix and suffix 21 Designations information There are two designation systems for SKF Explorer sealed spherical roller bearings. One identifies sealed bearings in the standard ISO dimension

More information

The Characteristics of PMI Linear Guideways

The Characteristics of PMI Linear Guideways Linear Guideway 1 The Characteristics of PMI Linear Guideways (1) High positioning accuracy, high repeatability The PMI linear guideway is a design of rolling motion with a low friction coeffcient, and

More information

PTFE SELF-LUBRICATE BEARING

PTFE SELF-LUBRICATE BEARING PTFE SEF-UBRICATE BEARING About US SAIBO is one of world recognized leaders in design and manufacturing of low friction linear motion components and precision bearings. SAIBO products are exported to

More information

Linear Guideway. Forniture per l Industria Gelmini S.r.l.

Linear Guideway. Forniture per l Industria Gelmini S.r.l. Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319

More information

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION Ball Bearing Cages, Retainers, and Ball Separators The ball bearing cage (also known as a bearing retainer or ball separator used interchangeably), is the component in a ball bearing, that separates the

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings

More information

R310EN 2302 ( ) The Drive & Control Company

R310EN 2302 ( ) The Drive & Control Company R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range

More information

Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs

Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs Place a recirculating-ball bushing on a shaft and what do you get? Frictionless movement of

More information

(1) High positioning accuracy, high repeatability. (2) Low frictional resistance, high precision maintained for long period

(1) High positioning accuracy, high repeatability. (2) Low frictional resistance, high precision maintained for long period Linear Guideway 1 The Characteristics of PMI Linear Guideways (1) igh positioning accuracy, high repeatability The PMI linear guideway is a design of rolling motion with a low friction coeffcient, and

More information

Precise Stable Durability High Rigidity. Meet the Multi-Demand of Accuracy and Efficiency

Precise Stable Durability High Rigidity. Meet the Multi-Demand of Accuracy and Efficiency Precise Stable Durability High Rigidity Meet the Multi-Demand of Accuracy and Efficiency Linear Guideway B1-1 The Characteristics of PMI Linear Guideways High positioning accuracy, high repeatability

More information

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA 1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor

More information

The Classification Chart of PMI Linear Guideways

The Classification Chart of PMI Linear Guideways 1 The Characteristics of MI s The Classification Chart of MI s 2 (1) igh positioning accuracy, high repeatability The MI linear guideway is a design of rolling motion with a low friction coefficient, and

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

Easy Slide Rails ov -easy_slide_divider - U pdated

Easy Slide Rails ov -easy_slide_divider - U pdated Easy Slide Rails ov-easy_slide_divider - Updated - 18-09-2017 163 Easy Slide Rails Easy Slide Rails Introduction The Easy Slide family of linear rails have a compact cross-section and low-friction movement.

More information

BALL SPLINE ROTARY BALL SPLINE STROKE BALL SPLINE BALL SCREW SPLINE

BALL SPLINE ROTARY BALL SPLINE STROKE BALL SPLINE BALL SCREW SPLINE ROTARY STROKE BALL SCREW SPLINE STRUCTURE AND ADVANTAGES B- TYPES B- ACCURACY B- PRELOAD AND CLEARANCE IN ROTATIONAL DIRECTION B- STRENGTH OF SPLINE SHAFT B- LOAD RATING B- CALCULATION OF DEFLECTION AND

More information

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1 NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need

More information

TELESCOPIC RAILS HARDENED TELESCOPIC RAILS FOR HIGHLY DYNAMIC APPLICATIONS 7.1 PRODUCT OVERVIEW 7.2 PART EXTENSIONS 7.

TELESCOPIC RAILS HARDENED TELESCOPIC RAILS FOR HIGHLY DYNAMIC APPLICATIONS 7.1 PRODUCT OVERVIEW 7.2 PART EXTENSIONS 7. 7 TELESCOPIC RAILS HARDENED TELESCOPIC RAILS FOR HIGHLY DYNAMIC APPLICATIONS PAGE 106 PAGE 116 PAGE 120 PAGE 126 7.1 PRODUCT OVERVIEW 7.2 PART EXTENSIONS 7.3 FULL EXTENSIONS 7.4 LINEAR GUIDES 105 PRODUCT

More information

LINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:

LINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX: R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction

More information

HepcoMotion. SBD Sealed Belt Drive

HepcoMotion. SBD Sealed Belt Drive HepcoMotion SBD Sealed Belt Drive Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load

More information

Берг АБ Тел. (495) , факс (495)

Берг АБ Тел. (495) , факс (495) HepcoMotion SBD Sealed Belt Drive www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 223-3071 Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit.

More information

TELESCOPIC-LINE. Semi-telescopic-rail LST. Telescopic-rail LSE. Linear guides with ball-cage LSS

TELESCOPIC-LINE. Semi-telescopic-rail LST. Telescopic-rail LSE. Linear guides with ball-cage LSS TELESCOPIC-LINE Semi-telescopic-rail LST Telescopic-rail LSE Linear guides with ball-cage LSS 1 Ball rails LSS, LST and LSE The ball rails produced by Nadella are very compact and flexible products. Made

More information

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories

More information

LINEAR ACTUATOR INDUSTRIAL DUTY 10B SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY 10B SERIES Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm],

More information

HepcoMotion MHD Heavy Duty Track Roller Guidance System

HepcoMotion MHD Heavy Duty Track Roller Guidance System Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly

More information

LM Roller General Catalog

LM Roller General Catalog General Catalog A Product Descriptions Features and Types... A10-2 Features of the... A10-2 Structure and Features... A10-2 Types of the... A10-4 Types and Features... A10-4 Point of Selection... A10-6

More information

Features of the Slide Pack

Features of the Slide Pack BER AB тел. (495) 727-22-72 thk-mail@ya.ru Features and Types Features of the Mounting plate Ball Ball case Slide rail Seal uide plate Stopper Slider Structure and Features Fig.1 Structure of Model FBW-RUU

More information

Ballscrews / Linear Guideway General Catalog

Ballscrews / Linear Guideway General Catalog Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower

More information

Actuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.

Actuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z. Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist

More information

...components in motion. Easy Rail

...components in motion. Easy Rail ...components in motion Easy Rail Easy Rail Introduction The Easy Rail family have a compact cross-section and low-friction movement. Robust and Long Service Life Easy Rail s range of cross-sectional rail

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. EASYSLIDE Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make changes

More information

LM Guide Actuator KR. For details, visit THK at CATALOG No E. Product information is updated regularly on the THK website.

LM Guide Actuator KR. For details, visit THK at  CATALOG No E. Product information is updated regularly on the THK website. LM Guide Actuator KR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.209-10E Integrated LM Guide and all Screw High-rigidity / High-precision

More information

1 of 19. Asia Automation Parts Supply (PG) Sdn. Bhd. Flange Unit (Oval) Pillow Block

1 of 19. Asia Automation Parts Supply (PG) Sdn. Bhd. Flange Unit (Oval) Pillow Block Asia Automation Parts Supply (PG) Sdn. Bhd. Flange Unit (Oval) Pillow Block YAMADA Spherical Plain Radial Bearings with Fitting Crack and Fitting Groove YAMADA Thrust Ball Bearing Series 51100 & 51200

More information

FLANGED TYPE LINEAR BEARINGS

FLANGED TYPE LINEAR BEARINGS FLANED TYPE LINEAR BEARINS Inch and Metric Recirculating Ball SQUARE FLANE (SF) ROUND RANE (RF) Requires no housing, thus reducing costs Requires little installation space Ensures high accuracy upon replacement

More information

NEW Compact series. New KSF10 Size, Now Available Top Cover Type / Open Cover Type Lineup. For details, visit THK at Compact Series KSF

NEW Compact series. New KSF10 Size, Now Available Top Cover Type / Open Cover Type Lineup. For details, visit THK at   Compact Series KSF NEW ompact series ompact Series New 1 Size, Now vailable Top over Type / Open over Type For details, visit THK at www.thk.com information is updated regularly on the THK website. TLOG No.396-1E-EU ELETRI

More information

R310EN 2211 ( ) The Drive & Control Company

R310EN 2211 ( ) The Drive & Control Company eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball

More information

Bearing Fundamentals. Timken Training

Bearing Fundamentals. Timken Training Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction

More information

12.4 Miniature Type, MSC MSD Stainless Steel Series

12.4 Miniature Type, MSC MSD Stainless Steel Series 12.4 Miniature Type, MSC MSD Stainless Steel Series A. Construction Carriage End Cap MSC Standard Type End Seal Rail MSD Wide Type Ball Retainer Bottom Seal 45 45 B. Characteristics MSC st ows with Gothic-arch

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS

More information

Cylindrical roller bearings

Cylindrical roller bearings Cylindrical roller bearings Cylindrical roller bearings are manufactured in a various range of constructive types and sizes, particularly single row cylindrical roller bearings but also two or more row

More information

LINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE

LINEAR ACTUATOR INDUSTRIAL DUTY LACT BALL SCREW DRIVE Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame with stainless steel extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [152mm], 8 [203mm], 12 [305mm],

More information

Linear Bushings and Shafts

Linear Bushings and Shafts Linear Bushings and Shafts 45 b 1cr RA 83 100.1 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum Runner

More information

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES

LINEAR ACTUATOR INDUSTRIAL DUTY 10A SERIES Product Data Sheet LINEAR ACTUATOR Standard Features: All steel frame and extension tube o Aluminum gearbox housing Nominal stroke lengths: 4 [102mm], 6 [153mm], 8 [203mm], 12 [305mm], 18 [457mm], 24 [610mm],

More information

Linear Bushings and Shafts Inch Series

Linear Bushings and Shafts Inch Series Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company

More information