Instructions for Parts Books

Transcription

1 Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages: REF.No The number refering to the part on the picture page of the parts book. Part No. The number assigned to this part at the time of printing the parts book. Description Discription of part. Q'ty S.No. I/C Quanity of part used on that page. Serial number range of the equipment that this part will fit. >= Your serial number should be greater than or equal to the number shown. <= Your serial number should be lesser than or equal to the serial number shown. Interchangeability of part shown. The part shown will work for the older and later serial number. # The part shown is not interchangable with the other serial number. new for old old for new Remarks Notes about this particulart part. Sometimes this may say except [FR] or [CA] Note about Country Codes: The parts books we use in the United States of America may also contain information about a part that would be different in another country. It is important that you are aware of the country codes in some instances. Symbol A CA FR GR PO AU Country United States of America Canada France Greece Portugal Australia If the remarks column says for example EXCEPT [FR] this part works in all countries except France. That means it will work here in the USA.

2 Part No. Description Book 01L2 MAIN FRAME A L2 SIDE FRAME A L2 BOOM A L1 CONTROL VALVE A L2 CONTROL VALVE A L1 CONTROL VALVE [COMPONENT PARTS] A L2 CONTROL VALVE [COMPONENT PARTS] A L1 CONTROL LEVER A L2 CONTROL LEVER A L07 CYLINDER / HYDRAULIC HOSE A L2 CYLINDER (BOOM) [COMPONENT PARTS] A L2 CYLINDER (BUCKET) [COMPONENT PARTS] A L10 HYDRAULIC TUBE A L11 HYDRAULIC HOSE A L12 ACCESSORIES AND SERVICE PARTS A0075 Ref. LA681 Page 66089

3 MAIN FRAME Reference:01L2 Page:1

4 MAIN FRAME REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) FRAME MAIN LH(LABEL) LABEL DANGER LABEL DANGER LABEL WARNING HEX.BOLT 2 (M12*1.25*80) WASHER SPRING 2 (M12) LOCK HEX.BOLT 4 (M14*1.5*40) WASHER SPRING 4 (9/16) LOCK WASHER PLAIN 4 (9/16HD) HEX.BOLT 2 (M12*1.25*30) WASHER SPRING 2 (M12) LOCK WASHER PLAIN 2 (1/2HD) FRAME MAIN RH HEX.BOLT 2 (M12*1.25*80) WASHER SPRING 2 (M12) LOCK HEX.BOLT 4 (M14*1.5*40) WASHER SPRING 4 (9/16) LOCK WASHER PLAIN 4 (9/16HD) HEX.BOLT 2 (M12*1.25*30) WASHER SPRING 2 (M12) LOCK WASHER PLAIN 2 (1/2HD) CONNECTOR HEX.BOLT 4 (9/16-18UNF*1-3/4) HEX.NUT 4 (9/16-18UNF) WASHER SPRING 4 (9/16) LOCK 210 7J SUPPORT HOSE 1 STANDARD VALVE TYPE 0 0 (L2085) HEX.BOLT 2 STANDARD VALVE TYPE 0 0 (L2085) WASHER SPRING LOCK 2 STANDARD VALVE TYPE (L2085) 0 0 Reference:01L2 Page:1

5 SIDE FRAME Reference:01L2 Page:

6 SIDE FRAME REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) 7J FRAME SIDE LH(LABEL) LABEL DANGER LABEL CAUTION J LABEL MODEL LABEL LUBRICATE J FRAME SIDE RH(LABEL) LABEL WARNING CONNECTOR SIDE FRAME HEX.BOLT 2 (9/16-18UNF*1-1/2) HEX.NUT 2 (9/16-18UNF) WASHER SPRING LOCK 2 (9/16) PIN PIN LYNCH J SUPPORT BRACE PLATE HEX.BOLT 2 (M16*1.5*50) WASHER SPRING LOCK 2 (5/8) HEX.BOLT 4 (9/16-18UNF*2) HEX.BOLT 2 (9/16-18UNF*1-3/4) HEX.NUT 6 (9/16-18UNF) WASHER SPRING LOCK 6 (9/16) HEX.BOLT 4 (M14*1.5*40) WASHER SPRING LOCK 4 (9/16) J BRACE HEX.BOLT 12 (9/16-18UNF*1-1/2) HEX.NUT 12 (9/16-18UNF) WASHER SPRING LOCK 12 (9/16) J PIN PIN LYNCH J GUARD FRONT HEX.BOLT 2 (9/16-18UNF*1-1/4) HEX.BOLT 2 (9/16-18UNF*1-1/2) WASHER SPRING LOCK 4 (9/16) HEX.NUT 2 (9/16-18UNF) 0 0 Reference:01L2 Page:2

7 BOOM Reference:01L2 Page:

8 BOOM REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) 7J STAND LH J STAND RH PIN SPRING LOCK J PIN CIR-CRIP EXTERNAL 4 (3/4) 0 0 7J BOOM FITTING GREASE 2 (90DEG.) LABEL KUBOTA J LABEL LA PIN PIN PIN FITTING GREASE 4 (1/4-28T.T.) PIN PIN HEX.BOLT 12 (1/4-20UNC*2-1/4) NUT LOCKING 12 (1/4-20UNC) BUCKET EDGE CUTTING EDGE SIDE CUTTING LABEL LEVELER Reference:01L2 Page:3

9 CONTROL VALVE Reference:01L1 Page:4

10 CONTROL VALVE [STANDARD VALVE TYPE (L2085)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) 7J STAY VALVE HEX.BOLT 3 (1/2-13UNC*1-1/4) HEX.NUT 3 (1/2-13UNC) WASHER SPRING 3 (1/2) 0 0 LOCK 7J VALVE CONTROL 1 REFER TO L. No. B07-L FOR 0 0 COMPONENTS HEX.BOLT 2 (1/4-20UNC*3/4) WASHER SPRING 2 (1/4) 0 0 LOCK ASSY ADAPTER ADAPTER O-RING Reference:01L1 Page:4

11 CONTROL VALVE Reference:01L2 Page:

12 CONTROL VALVE [REMOTE VALVE TYPE (L2086)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) VALVE CONTROL 1 REFER TO L. No. B07-R FOR 0 0 COMPONENTS. 7J STAY VALVE HEX.BOLT 2 (1/2-13UNC*1-1/4) WASHER SPRING 2 (1/2) 0 0 LOCK HEX.BOLT 2 (1/4-20UNC*3/4) WASHER SPRING 2 (1/4) 0 0 LOCK 7J TUBE PUMP ADAPTER ELBOW COUPLER PLUG DUST ASSY ADAPTER ADAPTER O-RING ASSY ELBOW ADJUST ELBOW ADJUSTABLE O-RING MARK WHITE MARK YELLOW MARK BLUE MARK RED J HOSE 1 HYDRAULIC NIPPLE CAP DUST SLEEVE J HOSE 4 HYDRAULIC J HOSE 6 HYDRAULIC J HOSE 7 HYDRAULIC J SLEEVE MARK ORANGE MARK GRAY MARK GREEN BAND CORD Reference:01L2 Page:5

13 CONTROL VALVE [COMPONENT PARTS] Reference:01L1 Page:6

14 CONTROL VALVE [COMPONENT PARTS] [STANDARD VALVE TYPE (L2085)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) 7J VALVE CONTROL CAP SPOOL 2 (5028) KIT DETENT FLOAT 1 (59221) 0 0 7J KIT REGEN. 1 (59243) ASSY SHUT-OFF PLUG 1 (52610) CAP SCREW-SOC.HD. 2 (3386) CAP SCREW-SOC.HD. 2 (3424) KIT LOAD CHECK 2 (59238) KIT SEAL 1 (59239) KIT UPPER BOOM SPOOL 1 (59223) KIT UPPER BKT.SPOOL 1 (59224) CAP SCREW-SOC.HD. 2 (5217) CAP SCREW-SOC.HD. 2 (5035) PLATE-SEAL 6 (5012) 0 0 Reference:01L1 Page:6

15 CONTROL VALVE [COMPONENT PARTS] Reference:01L2 Page:7

16 CONTROL VALVE [COMPONENT PARTS] [REMOTE VALVE TYPE (L2086)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) VALVE CONTROL CAP SPOOL 2 (5028) KIT DETENT FLOAT 1 (59221) KIT DETENT REGEN. 1 (59222) ASSY SHUT-OFF PLUG 1 (52610) CAP SCREW-SOC.HD. 2 (3386) CAP SCREW-SOC.HD. 2 (3424) KIT LOAD CHECK 2 (59238) KIT SEAL 1 (59239) KIT UPPER BOOM SPOOL 1 (59223) KIT UPPER BKT.SPOOL 1 (59224) CAP SCREW-SOC.HD. 4 (5217) PLATE-SEAL 7 (5012) 0 0 Reference:01L2 Page:7

17 CONTROL LEVER Reference:01L1 Page:8

18 CONTROL LEVER [STANDARD VALVE TYPE (L2085)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) 7J LEVER J BUSHING 1 (5/8*1.00) HEX.BOLT 1 (5/16-18UNC*3/4) WASHER SPRING LOCK 1 (5/16) WASHER PLAIN 1 (5/16W) ROD JOINT ROD END HEX.NUT 1 (5/16-24UNF) PIN WASHER PLAIN 1 (13/64) PIN COTTER 1 (1/32*1/2) J LEVER CONTROL GRIP LEVER SLEEVE HEX.BOLT 1 (3/8-24UNF*2) HEX.NUT 1 (3/8-24UNF) WASHER SPRING LOCK 1 (3/8) J PLATE SPOOL WASHER PLAIN 1 (5/16) PIN COTTER 1 (3/32*3/4) PIN WASHER PLAIN 1 (13/64) PIN COTTER 1 (1/32*1/2) J COVER HEX.BOLT 3 (5/16-18UNC*3/4) WASHER SPRING LOCK 3 (5/16) LABEL CONTROL ASSY LIMITER PLATE LIMITER HINGE HEX.BOLT 1 (5/16-18UNC*2-3/4) NUT LOCKING 1 (5/16-18UNC) CUSHION RUBBER HEX.BOLT 2 (5/16-18UNC*5/8) WASHER SPRING LOCK 2 (5/16) WASHER PLAIN 2 (5/16) CUSHION 1 RUBBER Reference:01L1 Page:8

19 CONTROL LEVER Reference:01L2 Page:

20 CONTROL LEVER [REMOTE VALVE TYPE (L2086)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) KIT CABLE END CLEVISPIN TERMINAL EYE FLANGE SLEEVE HEX.JAM NUT 2 (1/4-28UNF) HEX.JAM NUT 2 (3/4-16UNF) J GASKET SCREW S.H. 4 (1/4UNC*1-1/2) CABLE SAE 2 (45) HEX.JAM NUT 2 (5/8-18UNF) HEX.JAM NUT 2 (1/4-28UNF) COMP.CONTROLLER HEX.BOLT 2 (5/16-18UNC*5/8) WASHER SPRING LOCK 2 (5/16) ROD PIVOT PIN DOWEL 1 (1/4*7/8) 0 0 7J LEVER CONTROL CIR-CRIP EXTERNAL 2 (1/2) BOOT GRIP LEVER U JOINT BOOT U-JOINT WASHER PLAIN 2 (1/4) SCREW S.B.H 2 (1/4-28*5/8) WASHER SPRING LOCK 2 (1/4) WASHER TOOTH LOCK 2 (1/4) J COMP.STAND HEX.BOLT 3 (5/16-18UNC*1) WASHER PLAIN 3 (5/16W) WASHER SPRING LOCK 3 (5/16) HEX.NUT 3 (5/16-18UNC) LABEL CONTROL J LABEL MODEL Reference:01L2 Page:9

21 CYLINDER / HYDRAULIC HOSE Reference:01L07 Page:10

22 CYLINDER / HYDRAULIC HOSE REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) CYLINDER 1 2 REFER TO L. No. B11-L FOR 0 0 COMPONENTS CYLINDER 2 2 REFER TO L. No. B12-L FOR 0 0 COMPONENTS BAND CODE MARK WHITE MARK YELLOW MARK BLUE MARK RED J HOSE 1 3 STANDARD VALVE TYPE (L2085) 0 0 HYDRAULIC 7J HOSE 2 1 STANDARD VALVE TYPE (L2085) 0 0 HYDRAULIC 7J SLEEVE(18.0) 1 STANDARD VALVE TYPE (L2085) HOSE HYDRAULIC 120 7J HOSE HYDRAULIC HOSE HYDRAULIC HOSE HYDRAULIC FITTING GREASE 2 (90DEG.) 0 0 Reference:01L07 Page:10

23 CYLINDER (BOOM) [COMPONENT PARTS] 01L2 Page:

24 CYLINDER (BOOM) [COMPONENT PARTS] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) CYLINDER TUBE 1 COMP ROD 1 COMP HEAD PISTON NUT 2 (5/8-18UNFP) KIT SEAL FITTING GREASE 2 (1/8-27PTF) PLUG Reference:01L2 Page:11

25 CYLINDER (BUCKET) [COMPONENT PARTS] Reference:01L2 12

26 CYLINDER (BUCKET) [COMPONENT PARTS] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) CYLINDER TUBE 2 COMP ROD 2 COMP HEAD PISTON NUT 2 (5/8-18UNFP) KIT SEAL FITTING GREASE 2 (1/8-27PTF) PLUG Reference:01L2 Page:12

27 HYDRAULIC TUBE Reference:01L10 Page:13

28 HYDRAULIC TUBE REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) TUBE 1 HYDRAULIC TUBE 2 HYDRAULIC TUBE 3 HYDRAULIC TUBE 4 HYDRAULIC CLAMP HEX.BOLT 4 (5/16-18UNC*1) WASHER SPRING LOCK 4 (5/16) CLAMP HEX.BOLT 2 (5/16-18UNC*1) WASHER SPRING LOCK 2 (5/16) 0 0 Reference:01L10 Page:13

29 HYDRAULIC HOSE Reference:01L11 Page:14

30 HYDRAULIC HOSE [STANDARD VALVE TYPE (L2085)] REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) ASSY HOSE 4 HYD HOSE 4 HYDRAULIC NIPPLE GUARD HOSE J ASSY HOSE 5 HYD J HOSE 5 HYDRAULIC COUPLER PLUG DUST J ASSY HOSE 6 HYD J HOSE 6 HYDRAULIC NIPPLE CAP DUST J ASSY HOSE 7 HYD J HOSE 7 HYDRAULIC COUPLER PLUG DUST ADAPTER ADAPTER ADAPTER PT COUPLER NIPPLE CAP DUST BAND CORD MARK ORANGE MARK GRAY MARK GREEN Reference:01L11 Page:14

31 ACCESSORIES AND SERVICE PARTS REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) 7J OPERATOR'S MANUAL J PARTS LIST J WORKSHOP MANUAL J FLAT-RATE SCHEDULE L12 Page:15