Instructions for Parts Books

Transcription

1 Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages: REF.No The number refering to the part on the picture page of the parts book. Part No. The number assigned to this part at the time of printing the parts book. Description Discription of part. Q'ty S.No. I/C Quanity of part used on that page. Serial number range of the equipment that this part will fit. >= Your serial number should be greater than or equal to the number shown. <= Your serial number should be lesser than or equal to the serial number shown. Interchangeability of part shown. The part shown will work for the older and later serial number. # The part shown is not interchangable with the other serial number. new for old old for new Remarks Notes about this particulart part. Sometimes this may say except [FR] or [CA] Note about Country Codes: The parts books we use in the United States of America may also contain information about a part that would be different in another country. It is important that you are aware of the country codes in some instances. Symbol A CA FR GR PO AU Country United States of America Canada France Greece Portugal Australia If the remarks column says for example EXCEPT [FR] this part works in all countries except France. That means it will work here in the USA.

2 Part No. TL421 Loader Description Book 01L01 SIDE FRAME A L02 SWING FRAME A L03 BUCKET A L04 CONTROL VALVE A L05 CONTROL VALVE(COMPONENT PARTS) A L07 CONTROL LEVER A L08 LEVER COVER A L09 LINK A L10 CYLINDER HYDRAULIC HOSE A L11 BOOM CYLINDER (COMPONENT PARTS) A L12 BUCKET CYLINDER (COMPONENT PARTS) A L13 HYDRAULIC TUBE A L14 DELIVERY RETURN HOSE A L15 FRONT GUARD A L16 ACCESSORIES AND SERVICE PARTS A0115 Ref. TL421 Page 65164

3 SIDE FRAME Reference:01L01 Page:

4 SIDE FRAME REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) FRAME SIDE LH(LABEL) LABEL MODEL 1 N/A SERVICE LABEL LUBRICATE PIN SPRING FRAME SIDE RH(LABEL) HEX.BOLT 10 9/16-18UNF*1 1/ HEX.BOLT 4 9/16-18UNF*1 3/ HEX.NUT 10 9/16-18UNF WASHER SPRING LOCK 14 9/ WASHER PLAIN 24 9/16HD CONNECTOR SIDE FRAME HEX.BOLT 2 9/16-18UNF*1 1/ HEX.NUT 2 9/16-18UNF WASHER SPRING LOCK 2 9/ LABEL DANGER LABEL DANGER LABEL WARNING LABEL CAUTION COMP BRACE HEX.BOLT 16 9/16-18UNF*1 1/ HEX.NUT 16 9/16-18UNF WASHER SPRING LOCK 16 9/ PLATE SPRING HEX.BOLT 4 5/16-18UNC*1/ WASHER SPRING LOCK 4 5/ LABEL TL Reference:01L01 Page:1

5 SWING FRAME Reference:01L02 Page:2

6 SWING FRAME REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) BOOM LABEL KUBOTA LABEL B PIN PIN PIN FITTING GREASE 6 1/4-28T.T BUSHING BUSHING BUSHING PIN PIN HEX.BOLT 12 1/4-20UNF*2 1/ NUT LOCKING 12 1/4-20UNC COMP LINK LINK COMP LINK COMP LINK Reference:01L02 Page:2

7 BUCKET Reference:01L03 Page:3

8 BUCKET REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) BUCKET EDGE CUTTING LABEL LEVELER LABEL MODEL 1 N/A SERVICE PIN FITTING GREASE 4 1/4-28T.T HEX.BOLT 4 1/4-20UNC*2 1/ NUT LOCKING 4 1/4-20UNC BUCKET 56R EDGE CUTTING LABEL LEVELER LABEL MODEL 1 N/A SERVICE PIN FITTING GREASE 4 1/4-28T.T HEX.BOLT 4 1/4-20UNC*2 1/ NUT LOCKING 4 1/4-20UNC KIT BLADE BOLT ON Reference:01L03 Page:3

9 CONTROL VALVE Reference:01L04 Page:4

10 CONTROL VALVE REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) STAY VALVE HEX.BOLT 2 1/2-13UNC*3/ WASHER SPRING LOCK 2 1/ VALVE CONTROL HEX.BOLT 3 3/8-16UNC*1 1/ HEX.NUT 3 3/8-16UNC WASHER SPRING LOCK 3 3/ ASSY ADAPTER ADAPTER 1 2 N/A SERVICE O-RING ASSY ELBOW ADJUST ELBOW ADJUSTABLE 2 N/A SERVICE O-RING ASSY ELBOW 2 ADJUST ELBOW 2 ADJUSTABLE 3 N/A SERVICE O-RING ASSY PLUG ORIFICE PLUG ORIFICE 1 N/A SERVICE O-RING Reference:01L04 Page:4

11 CONTROL VALVE(COMPONENT PARTS) Reference:01L05 Page:

12 CONTROL VALVE(COMPONENT PARTS) REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) VALVE CONTROL ASSY INLET SECTION O-RING ASSY SPOOL SECTION CLEVIS END SPACER-CAP SPOOL PLATE-SEAL CAP SCREW-SOC.HD CAP-SPOOL SPACER-CAP SPOOL SPACER POPPET-C.V SPRING CAP SCREW-SOC.HD KIT DETENT KIT CAP SPOOL SEC ASSY SPOOL SEC MACHINE SCREW-RD.HD CAP-SPOOL CAP SCREW-SOC.HD KIT CAP SPOOL SEC ASSY OUTLET SECTION O-RING ASSY PLUG PLUG-SAE 1 N/A SERVICE O-RING KIT TIE ROD TIE ROD TIE ROD NUT-SPECIAL NUT-SPECIAL O-RING KIT SEAL SPOOL SEC O-RING WIPER O-RING O-RING KIT SEAL SPOOL SEC O-RING WIPER Reference:01L05 Page:5

13 CONTROL LEVER Reference:01L07 Page:6

14 CONTROL LEVER REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) LEVER BUSHING COLLAR 5/ CIR-CLIP EXTERNAL 1 5/ ROD WASHER PLAIN 1 5/ PIN COTTER 1 1/32*1/ PIN WASHER PLAIN 2 13/ PIN COTTER 2 1/32*1/ LEVER CONTROL GRIP LEVER SLEEVE HEX.BOLT 1 3/8-24UNF* HEX.NUT 1 3/8-24UNF WASHER SPRING LOCK 1 3/ JOINT ROD END COLLAR CIR-CLIP EXTERNAL 1 3/ ROD HEX.JAM NUT 1 3/8-24UNF JOINT ROD END COLLAR CIR-CLIP EXTERNAL 1 3/ ROD HEX.JAM NUT 1 3/8-24UNF WASHER PLAIN 1 5/ PIN COTTER 1 3/32-3/4 0 0 Reference:01L07 Page:6

15 LEVER COVER Reference:01L08 Page:7

16 LEVER COVER REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) COMP COVER BUSHING HEX.BOLT 2 5/16-18UNC*3/ WASHER SPRING LOCK 2 5/ LABEL CONTROL ASSY LIMITER HEX.BOLT 2 5/16-18UNC*5/ WASHER SPRING LOCK 2 5/ WASHER PLAIN 2 5/ CUSHION 1 RUBBER HEX.BOLT 1 5/16-18UNC NUT LOCKING 1 5/16-18UNC 0 0 Reference:01L08 Page:7

17 LINK Reference:01L09 Page:8

18 LINK REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) LINK BUSHING LINK PIN SPRING 1 1/4* PIN SPRING 1 5/32*7/ ROD 1 CONNECTING LINK BUSHING WASHER PLAIN 1 5/ PIN COTTER 1 3/32*3/ COLLAR 9/ CIR-CLIP EXTERNAL 1 9/ LINK BUSHING WASHER PLAIN 2 5/ PIN COTTER 2 3/32*3/ ROD 2 CONNECTING ROD HEX.JAM NUT 1 3/8-24UNF LINK BUSHING COLLAR 9/ CIR-CLIP EXTERNAL 1 9/ WASHER PLAIN 1 5/ PIN COTTER 1 3/32*3/ LINK WASHER PLAIN 1 5/ PIN COTTER 1 3/32*3/4 0 0 Reference:01L09 Page:8

19 CYLINDER HYDRAULIC HOSE Reference:01L10 Page:9

20 CYLINDER HYDRAULIC HOSE REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) CYLINDER CYLINDER BAND CODE MARK WHITE MARK YELLOW MARK BLUE MARK RED HOSE 1 HYDRAULIC HOSE 2 HYDRAULIC HOSE 8 HYDRAULIC HOSE 9 HYDRAULIC HOSE 10 HYDRAULIC HOSE 11 HYDRAULIC SLEEVE Reference:01L10 Page:9

21 BOOM CYLINDER (COMPONENT PARTS) Reference:01L11 Page:10

22 BOOM CYLINDER (COMPONENT PARTS) REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) CYLINDER TUBE 1 COMP ROD 1 COMP HEAD PISTON NUT KIT 1 SEAL FITTING GREASE 2 90DEG FITTING GREASE 2 1/8-27PTF PLUG Reference:01L11 Page:10

23 BUCKET CYLINDER (COMPONENT PARTS) Reference:01L12 Page:11

24 BUCKET CYLINDER (COMPONENT PARTS) REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) CYLINDER TUBE 2 COMP ROD 2 COMP HEAD PISTON NUT KIT SEAL FITTING GREASE 2 1/8-27PTF PLUG Reference:01L12 Page:11

25 HYDRAULIC TUBE Reference:01L13 Page:12

26 HYDRAULIC TUBE REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) TUBE 1 HYDRAULIC TUBE 2 HYDRAULIC TUBE 3 HYDRAULIC TUBE 4 HYDRAULIC CLAMP HEX.BOLT 4 5/16-18UNC* WASHER SPRING LOCK 4 5/ CLAMP HEX.BOLT 2 5/16-18UNC* WASHER SPRING LOCK 2 5/ Reference:01L13 Page:12

27 DELIVERY RETURN HOSE Reference:01L14 Page:13

28 DELIVERY RETURN HOSE REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) TUBE P.B SLEEVE HOSE 5 HYDRAULIC SLEEVE TUBE PUMP BAND ADAPTER TUBE TANK ADAPTER BAND CODE Reference:01L14 Page:13

29 FRONT GUARD Reference:01L15 Page:14

30 FRONT GUARD REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight (kgf) Weight (lb) GUARD FRONT COLLAR HEX.BOLT 2 M16*1.5* WASHER PLAIN 2 5/ WASHER SPRING LOCK 2 5/ STAY FRONT GUARD PIN CLEVIS 2 3/8*3/ PIN COTTER 2 9/64*3/ WASHER PLAIN 8 3/ Reference:01L15 Page:14

31 ACCESSORIES AND SERVICE PARTS REF.No Part No. Description Q'ty S.No. I/C REMARKS Weight Weight (kgf) (lb) OPERATOR'S MANUAL Reference:01L16 Page:15