BRACKETS AND ADAPTERS FOR CAMERA HOUSINGS
|
|
|
- Walter Fox
- 6 years ago
- Views:
Transcription
1 BRCKETS ND DPTERS FOR CMER HOUSINGS WBJ WLL MOUNT BRCKET Height: 185mm (7.3in) Unit weight: 0.6kg (1.3lb) WBM WLL MOUNT BRCKET Length: 204mm (8in) Unit weight: 0.5kg (1.1lb) WBOV2 WLL MOUNT BRCKET Internal cable management Length: 204mm (8in) The sealing rings OWBIP2 or OWBIP3 ensure an IP66 protection to the housing Unit weight: 0.6kg (1.3lb) WBOV32 WLL BRCKET WITH SUPPORT PLTE ND WETHERPROOF JUNCTION BOX Internal cable management directly to the box Length: 204mm (8in) The sealing rings OWBIP2 or OWBIP3 ensure an IP66 protection to the housing Unit weight: 2.4kg (5.3lb) WBL WLL BRCKET FOR HGV Solid, anticorodal aluminium construction Load rating: 70kg (154lb) Length: 457.5mm (18,7in) Unit weight: 6.6kg (14.5lb) WCM3 CEILING MOUNT Length: 300mm (11.8in) Unit weight: 1.8kg (4lb) WFWC PRPET BRCKET Length: 185mm (7.3in) vailable extension through WFWBT Unit weight: 0.5kg (1.1lb) WBJ WBM WBOV2 WBOV32 WBL WCM3 WFWC DT SHEETS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
2 WCM42 CEILING MOUNT Internal cable management Length: 412mm (16.2in) 500mm (19in) linear extension available with WCMP Unit weight: 1.3kg (2.8lb) WCM5 CEILING MOUNT Length: 412mm (16.2in) 500mm (19in) linear extension available with WCMP Unit weight: 1.4kg (3lb) WCMP LINER EXTENSION FOR WCM42 ND WCM5 It allows a 500mm (19in) extension Unit weight: 0.5kg (1.1lb) WCW CORNER MOUNT DPTOR Made of steel Load rating: 30kg (66lb) WSFP POLE MOUNT DPTOR llows the internal cable management Load rating: 30kg (66lb) For pole diameters: 65 mm ( in) Unit weight: 0.9kg PTCC1 POLE MOUNT DPTOR For pole diameters: mm (3 5.9in) Load rating: 50kg (lb) Unit weight: 2.6kg (5.7lb) DBHWGC POLE MOUNT DPTOR Made of steel For pole diameters: 2 225mm ( in) (static load) To be combined with the reinforcing support plate WCP Unit weight: 1.2kg (2.6lb) WCP REINFORCING SUPPORT PLTE FOR POOR CONSISTENCY WLLS vailable with a supporting box with internal cable channel (WBOV32) Load rating: 50kg (lb) Unit weight: 0.6kg (1.3lb) WCM42 WCMP WCW PTCC1 WCM5 WSFP DBHWGC WCP VIDEO SECURITY PRODUCTS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
3 COMPTIBILITY HOUSINGS/BRCKETS Wall Ceiling Column Bracket WBL WBJ WBM WBOV2 WBOV32 WCM3 WCM42 WCM5 WFWC Length 457mm (18in) 285mm (11in) 226mm (9in) 201mm (8in) 238mm (9.4in) 300mm (11.8in) 412mm (16.2in) 412mm (16.2in) 185mm (7.3in) HOV p p p p p p p HTV p p p p p p p PUNTO p p p p p p p VERSO COMPCT p p p p p p p p VERSO p p p p p p p HEK p p p p p p p HEB p p p p p p p p HEG p p p HTG p p p HGV p PCKGE Model Number Weight Dimensions (WxHxL) Master carton WBJ 0.7kg (1,5lb) 7.5x12x31cm (3x5x12in) 20 WBM 0.6kg (1.3lb) 7.5x12x23cm (3x4.7x9in) 25 WBOV2 0.7kg (1,5lb) 8.5x13x22cm (3.3x5x9in) 25 WBOV32 2.5kg (5.5lb) 11x19x53cm (4.3x7.5x21in) - WBL 7kg (15.4lb) 27x18x49cm (.5x7x19in) - WCM3 2.1kg (4.6lb) 13x32.5x27cm (5x13x11in) 12 WFWC 1kg (2.2lb) 14.5x15x27cm (6x6x11in) 15 PCKGE Model Number Weight Dimensions (WxHxL) Master carton WCM42 1.7kg (3.7lb).5x37x37cm (4x14x14in) 6 WCM5 1.7kg (3.7lb).5x37x37cm (4x14x14in) 6 WCMP 0.6kg (1.3lb) 6x6x58.5cm (2x2x23in) - WSFP 1kg (2.2lb) x16x23cm (4x6x9in) 15 PTCC1 2.8kg (6.2lb) 14x25.5x20cm (5.5xx7.9in) 8 DBHWGC 1.5kg (3.3lb) 24x15x22cm (9x6x9in) WCW 1.1kg (2.2lb) 14.5x15x27cm (6x6x11in) 15 WCP 0.7kg (1,5lb) x16x23cm (4x6x9in) 30 DT SHEETS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
4 TECHNICL DRWINGS Sizes in millimeters MXIMUM INCLINTION WBJ MXIMUM INCLINTION WBM = B 65 5 = = 62 = 75 B Ø 6 MXIMUM INCLINTION WBOV WBOV VIDEO SECURITY PRODUCTS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
5 Sizes in millimeters Ø WBL MXIMUM INCLINTION Ø 8.5 WCM Ø 120 WFWC 7 DT SHEETS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
6 Sizes in millimeters. Ø 170 MXIMUM INCLINTION WCM Ø 145 Ø Ø 170 MXIMUM INCLINTION WCM Ø 145 Ø M30X Ø WCMP VIDEO SECURITY PRODUCTS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
7 Sizes in millimeters. 219 = = M WSFP PTCC DBHWGC Ø Ø WCW Ø 6.5 Ø WCP Ø 3/4" GS - DT SHEETS Specifications subject to change without notice. Videotec S.p.. ll rights reserved.
WAS - WASPT 5 OR 23 LITER TANK WITH PUMP
2015/10/23 5 OR 23 LITER TANK WITH PUMP MAIN FEATURES Polyethylene tank with stainless steel cage Versions with delivery up to 5m (16ft), 11m (36ft) or 30m (98ft) Versions with alarm for the lack of liquid
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NEW size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. Wved surfce Added new length version New
HY SERIES. NEW size added and selectable in 56 sizes. HEAT-SINK ALUMINIUM ENCLOSURE. Excellent Cooling Performance. Added new length version
EAT-SINK ALUMINIUM ENCLOSURE Y SERIES NE size dded nd selectble in 5 sizes. Excellent Cooling Performnce The wved surfce on the fins increses cooling performnce. ved surfce Added new length version New
ELECTRIC CYLINDER SERIES ELEKTRO ROUND DC
ELECTRIC CYLINDER SERIES ELEKTRO ROUND DC In the ELEKTRO ROUND DC cylinder, the forward movement of the piston rod is obtained via an acme screw and a self-lubricating technopolymer nut. This piston has
STAINLESS STEEL HOUSINGS, ACCESSORIES
STAINLESS STEEL HOUSINGS, ACCESSORIES ONXAB1025B AIR BARRIER WITH IR-PROOF GLASS Made of AISI 316L electropolished stainless steel ONXAB1025B ONXAB2 AIR BARRIER WITH TEMPERED WINDOW GLASS Made of AISI
Housing: black plastic Measuring element: copper spring. Protection rate: IP31 Threaded: axial type. Setting: 0 10 bar (0 150 psi)
DESCRIPTION The wide range of FI FILTRI indicators, covers all industrial applications. They are directly installed on the filter, and allow a complete control of the clogging level of the element. This
SERIES ESFX. Electric Linear Actuator Slides with Ball Screw Drive. Series ESFX can be combined to create a multi-axis Cartesian robot system.
SERIES ESFX Electric Linear ctuator Slides with all Screw Drive Series ESFX can be combined to create a multi-axis artesian robot system. 1 SERIES ESFX ELETRI LINER TUTOR SLIDE Easy 3 Step ctuator & Motor
The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
SIDE DETAIL ELEVATION DETAIL JCM VIVA VISIO SYSTEM PRODUCT DATA -
* UCP REQUIRED IF SYSTEM DOES NOT HVE HNDRIL OPTIONL CPS ) SS 'U' CP ) SS Ø" CP 3) SS Ø" LED CP ) Ø " OR Ø" SS HNDRIL ) Ø" WOOD HNDRIL CHERRY WOOD " GP (NOM) RED OK WHITE OK MPLE WOOD 3) Ø " LED iril 3'7"
u-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULTOR ND FILTER/REGULTOR Stainless Steel L Compact /, High Flow / - / FETURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in
3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
UNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
Standards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
Type Description Order Nº Packing Qty. IP 65 junction box complying with DIN VDE 0606, U i
Nautic 025 80 x 80 x 52 mm with self-sealing, soft entry membranes M 20 seal range 2-16 mm Cable range 1-4 mm² Nautic 025 L empty, grey 490 902 01 60 / 3 Nautic 025 2.5 2, grey, 5-pole 1.5-4 mm² screw
MSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. Technical data Protection class IP40. CAD data is downloadable from our website.
MSR SERIES Technicl dt Protection clss IP40 MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our website. Avilble rnge W-30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce for sophisticted
CVHT Series - F rated cabinet fans
N 50-55 1/1/08 19:26 Página 50 BLT DRIVN BINT NS Series - 00 120 rated cabinet fans NW pproved to N12101- standard Range of belt drive cabinet fans designed for smoke extraction in fire conditions and
Worm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange 5 1.8 0.65 10 1.9
The Tracking Magnet Surface High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
The Tracking Magnet Recessed High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
Couper. Motori gear for swing gates MADE IN ITALY INSTRUCTION MANUAL
Couper Motori gear for swing gates EN INSTRUCTION MNUL MDE IN ITLY 1 - GENERL DESCRIPTION 1 - WRNINGS Unfulfilment of the below listed direction will release the KING gates srl, from any responsibility
Saving you Time, Saving you Money, Putting you First! CENTER HUNG TRAY. Width Length in Inches
INTRODUCTION For an integrated wire management system, Center Hung Tray simplifies the support and routing of power and telecom/teledata cabling. single hanger rod is used at each support point. This makes
SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
Performance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and
MixMate series the high-capacity connectors
MixMte series the high-cpcity connectors RockStr inserts MixMte series the high-cpcity connectors MixMte integrtes xil screw contcts nd TOP connection technology in one plug-in connector. The compct design
DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
Model 1001/1001HPS Drinking Fountain
INSTLLTION, OPERTION & MINTENNCE INSTRUCTIONS Kleppe Lane Sparks, NV 89-667 (77) 9-72 Fax (77) 9-72 E-mail: haws@hawsco.com website: www.hawsco.com Model 00/00HPS Drinking Fountain No. 20760(9) NOTE TO
Miscellaneous Fittings
B214 R&L REEL RCK SUPPORT FOR (32) PIPE 200 Lbs. (90.7 kg) B514 R&L REEL RCK SUPPORT FOR 2 (50) PIPE 246 Lbs. (111.6 kg) 3 5 /8 (92.1) 3 5 /8 (92.1) B214R Right Hand B214L Left Hand B514R Right Hand B514L
STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
PIPE SUPPORTS IRANIAN PETROLEUM STANDARDS COVER SHEET B A REV. DRAWING No. DATE DATE IPS-D-AR-012 DESCRIPTION
SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-0 SHT ONRETE JOISTS STEEL JOISTS WOOD JOISTS NOTE: STRUTURL STEEL EM SEE
CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
INTRODUCTION CP 06 F C - A 4 L - F GENERAL DESCRIPTION DESIGN PARAMETER DUCTED CONCEALED WITH PLENUM. F - c/w Filter
INTRODUCTION GENERL DESCRIPTION Ducted Direct Drive Fan Coil ir Conditioners are designed to fulfill the air conditioning requirements of today s living. These requirements include dependable trouble-free
TSM-DC01A. The Solution NEW. linear performance warranty. Module can bear snow loads up to 5400Pa and wind loads up to 2400Pa
MONO MULTI DESIGN SOLUTIONS TSM-DC01 The Solution Module can bear snow loads up to 5400Pa and wind loads up to 400Pa Guaranteed power output (0~+3%) High performance under low light conditions (Cloudy
SLLS Linear Ceiling Diffuser
SLLS Linear Ceiling Diffuser ASLI SLLS is a type of diffuser combine a high air change rate capacity with maximum flexibility in air pattern and volume control. It offers unobtrusive good looks together
Energy Recovery Ventilator
PEG1610044CE Version:1601 Service Mnul Energy Recovery Ventiltor (North meric Mrket) WRNING This service informtion is designed for experienced repir technicins only nd is not designed for use by the generl
HOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
GM Standard - GM 90.25
GM Standard - GM 90.25 utomotive Standards - GM 90.25 GM 90.25.00-XX-XX Page /4 GM 90.25.01-XX Page /5 GM 90.25.02-XX Page /6 GM 90.25.03-XX Page /7 GM 90.25.04-XX Page /8 GM 90.25.05-XX-XX Page /9 GM
Piezoresistive high pressure sensor
Pressure Piezoresistive high pressure sensor Type 4067E...DS for the injection pressure application High pressure sensor with robust diaphragm and front seal for measurements at hydraulic systems (e.g.
Single-pole 10A35VDC 0.8mm Contact Gap Power Relay : G5LE-G Single-pole 16A250VAC Power Relay : G5LE-E. Contact Form 10A 35VDC
PCB Relay R G5LE-E/-G Single-pole 0A35VDC 0.8mm Contact Gap Power Relay : Single-pole 6A250VAC Power Relay : G5LE-E Sub-miniature 'sugar cube ' relay with universal terminal footprint. UL class-f coil
ELECTROMAGNETIC LEVELS
ELECTROMGNETIC LEVELS Precision and functionality, control points single or multiple, different materials to meet the various requirements of application. 8 IEG-TC1 1/2 IEG-TC2 1/2 ELECTROMGNETIC LEVEL
COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
MODEL E/V B-VENT CHIMNEY
MNUFCTURING EXCELLENCE HVC Steel Duct Pipe & Fittings MODEL E/V -VENT CHIMNEY Type Gas Vent 10" 30" ECCO is proud to be a member of: SMCN Sheet Metal and ir Conditioning Contractors National ssociation
AIR SPRINGS. Product Catalog and Selection Guide
IR SPRINGS Product Catalog and Selection Guide Enidine ir Springs (Double) ellows Type (Triple) ellows Type Rolling Lobe Type (Single) ellows Type Sleeve Type CONTENTS INTRODUCTION PGE dvantages of Enidine
POWER BUTTON: 25mm (1") CONDUIT X 3048mm (10'-0") LONG TO HOUSE POWER AND CONTROL CABLES (SUPPLIED BY DIEBOLD)
R Easy-aire GX PNEUMTIC DELIVERY SYSTEM 24mm(") DI. PNEUMTIC TUBE SYSTEM 86G OPERTOR ND 8G CUSTOMER DETILS L962 CLL -8-999-6 OPERTOR CONTROL PNEL PROJECTION FILE NO. 8-26 REV. SUBJECT TO CHNGE W ITHOUT
Content. Printed 2018
Track systems for Content Introduction 1 7 reasons 2 General information 3 General overview 4 General overview 5 UT25 6-7 T35-F 8-9 T35-C 10-11 T35-W 12-13 T55-F 14-15 T55-C 16-17 T55-W 18-19 FT45 20-21
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
Spring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:
2-3 Miniature MGN/MGW Series Features of MGN Series
54 G99TE08-0405 2-3 Miniature MGN/MGW Series 2-3-1 Features of MGN Series 2-3-2 Construction of MGN Series Cap Block End cap End seal Grease nipple Ball Bottom seal Retainer Rolling Circulation System:
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
CLAMP-CLOSED PIPE-STL BLK 1/2" (540) CLAMP-GROUNDING,PIPE CLAMP-CLOSED CLAMP-CLOSED
PIPE-STL LK /" 006-0-000 (700) 5598-0-0 SREW 000G-0- ELOW-STL, 90 DEG 0055-0-000 PIPE-STL LK /" 006-0-000 (50) ELOW-RSS-90,/FX/FPT 0070-0-000 LMP-GROUNDING,PIPE 0758-0-000 PIPE-STL LK /" 006-0-000 (805)
Wall Hoods INSTALLING HOOD CANOPY. Island Hoods
HEIGHT OF HOOD The bottom of the hood to should be 30 (76.2 cm) to 36 (91.4 cm) above the countertop. This would typically result in the bottom of the hood being 66 (167.6 cm) to 72 (182.9 cm) above the
DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
PTC Thermistors For Degaussing, Dual, Mono And Double Mono Cased
222 662 96... PTC Thermistors For Degaussing, FETURES a. Dual or double mono PTC degaussing. M6 Residual currents as low as 2 m (p-p), ideal for high-resolution displays Long decay time Stable performance
IMMERSION HEATERS METRIC
IMMERSION HETERS METRIC INDEX Screw plug tubular heaters m45x200 pag. 04-06 Screw plug tubular heaters m77x200 pag. 07-11 with thermowell pag. 12-13 Screw plug tubular heaters 1 1/2 pag. 14 00-03 - 0515
Specifications. S&C Omni-Rupter Switches Outdoor Distribution (14.4 kv and 25 kv) Conditions of Sale
S&C Omni-Rupter Switches Outdoor istribution (14.4 kv and 5 kv) Specifications Conditions of Sale STNR: Seller s standard conditions of sale as set forth in Price Sheet apply. SPECIL TO THIS PROUCT: INCLUSIONS:
HIGH FLOW SOLENOID VALVES
P PRODUCT ROCHURE HIGH FLOW SOLENOID VLVES HIGH FLOW IN COMPCT DESIGN TLE OF CONTENTS High Flow Solenoid Valves 9 How to ccessorize Product Features 9 ase Plate Options and ccessories Features and enefits
Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008
ROSE+BOPL PHOENIX MECNO COMPNY Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
Specifications. UL 1777 and ULC S641 System. Combustion Air System-DuraTech and DuraPlus HTC
Combustion ir System Triple-wall stovepipe system designed to provide air for combustion through its components. UL 1777 and ULC S641. DVL Double-wall interior close clearance stovepipe for connecting
FE-1000 INSERTION TYPE AIRFLOW SENSING ELEMENT
Technical Data Sheet FE-1000 INSERTION TYPE IR SENSING ELEMENT DESCRIPTION The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing
DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
MVSS. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V 60Hz and 200-240V, 50Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque
Decor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
Cable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
DURATAPE TM RGBW IP20 INDOOR
e Static Indoor Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with 2700ºK White LED to create different tone of
Automatic Outboard Flushing System 1.5
utomatic Flushing System 1.5 Manual Shown: Version 1.5 B with optional remote switch kit and optional inlet hose kit. Reverso Pumps, Inc. www.reversopumps.com contact@reversopumps.com Ph: (954) 522-0882
STANDARD CONSTRUCTION DETAILS STORM DRAINAGE REVISED - MAY 2017 DEPARTMENT OF ENGINEERING
STNDRD CONSTRUCTION DETILS STORM DRINGE REVISED - MY 2017 DEPRTMENT OF ENGINEERING GENERL NOTES CONCRETE,SPHLT STREET REPIR,PIPE EDDING UTILITY SUPPORT,WTER MIN LOWERING,CONCRETE COLLR TYPE "" STORM SEWER
9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
NEW All Biomass Chimney components are available in matte black. Just add "B" to the end of the part numbers you are ordering.
Type L iomass himney For use with biomass fuels such as pellet, corn, wheat or other grassy and woody plants as specified by appliance manufacturers. Tested and Listed to UL641 Pipe and fittings in 3 and
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75. Alsident System 100. Chemical Resistant (CR) Product Information SYSTEM 100 CR
Alsident System 100 Chemical Resistant (CR) Product Information System 100 Chemical Resistant (CR) General Information Product Specification Product Description System 100 Chemical Resistant (CR) Alsident
Cross-flow Fans. TFD/FFD Series
Cross-flow Fans TFD/FFD Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A
E1DU, E45DU, E80DU, E140DU electronic overlod relys 0.10 to 140 A Description 2CDC231001F0007 The E1DU up to E140DU re selfsupplied electronic overlod relys, which mens no extr externl supply is needed.
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
PE-5000 DUCT STATIC PRESSURE SENSING ELEMENT
Technical Data Sheet PE-5000 DUCT STTIC PRESSURE SENSING ELEMENT DESCRIPTION Model PE-5000 units are insertion-type primary duct pressure sensing elements designed to achieve pressure signal accuracy and
STANDARD PRODUCTS CATALOGUE Components for Lighting Columns, Sign Posts, CCTV & Power Transmission Poles
STNDRD PRODUCTS CTLOGUE Components for Lighting Columns, Sign Posts, CCTV & Power Transmission Poles Issue 9 Jan 2014 The Regent Engineering Co. (Walsall) Ltd - Salisbury Street - Darlaston - Wednesbury
DIST. AUTORIZADO MEX (55) QRO (442) MTY (81) Motors
MEX ) 3 63 23 31 QRO 2) 1 9 2 6 MTY 1) 3 1 1 Motors ISSUE 21 MEX ) 3 63 23 31 QRO 2) 1 9 2 6 MTY 1) 3 1 1 DC Servo Motors MSS Series Ratings to 6, RPM. Compact Length. Zero Cogging. cceleration Torques
Input Voltage VAC, 50 / 60 Hz. Input Power 2W - 12W/Ft Factory Programmable. Max. Load 120VAC / 277VAC
FETURES Plug-and-play design allows for any combination of 1, 1.5 and 4 foot LED modules (Max Run/Feed table listed on page 4) to be installed for up to 270 from a single power feed (Feet listed below).
Print This Page. Return To Index
PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re
SHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
ISO Maximum axial force N Standard stoke up to mm Maximum average axial force for 2500 km life N 8340
1 13/216 ED ELECTRIC CYLINDERS ISO 15552 DESCRIPTION N B C D E F M L H G - Rod guide B - Rod C - Piston D - Nut E - Bearing F - Coupling G - Coupling carter H - Screw L - Magnetic ring M - Barrel N - Front
Alfa Laval Optigo CD. Commercial air coolers - Dual discharge
Alfa Laval Optigo CD Commercial air coolers - Dual discharge Optigo CD Alfa Laval Optigo Simply fresh, today and tomorrow Optigo is the Alfa Laval platform for commercial air cooler ranges. Common distinctive
11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
Ultrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
Cross-Flow Fans. TF/FF Series
Cross-Flow Fans TF/FF Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
RLA Series Aluminum Open Frame Racks
EXCEPTIONL SUPPORT & PROTECTION 96-972 / rev 8e / 10-9-12 RL Series luminum Open Frame Racks EI/TI Compliant The RL Series 19 luminum Open Frame Rack Features vailable with 45 or 51 rackspaces 3/16 thick
INDUSTRIAL DOORS COLDROOM AND FREEZER GAS-PROOF SWING UNIVERSAL. TECHNICAL CATALOG. version
TECHNICL CTLOG INDUSTRIL DOORS COLDROOM ND FREEZER GS-PROOF SWING UNIVERSL PaNELTECH Sp. z o.o. 4-58 Chorzów ul. Michałkowicka 24 tel. 32 245 9 4 fax 32 245 9 39 drzwi@paneltech.pl www.paneltech.pl version
SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information
Alsident System100 Aluminium (AL) Product Information System 100 Aluminium (AL) General Information Product Specification Product Description System 100 Aluminium Alsident System airflow between 140-400
DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
Eco5 Compact SPARE PARTS CATALOGUE. - September
Eco5 Compact SPRE PRTS CTLOGUE - September 2015 - HOW TO RED THE SPRE PRTS CTLOGUE In the spare part catalogue, after the exploded diagrams, there are the components lists of the boilers; this is the
ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
Control stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Actuator with. Attachment A1. Lc [mm] Stroke Stroke T [mm] Stroke Stroke
![ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Actuator with. Attachment A1. Lc [mm] Stroke Stroke T [mm] Stroke Stroke](/thumbs/82/85703255.jpg "ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Actuator with. Attachment A1. Lc [mm] Stroke Stroke T [mm] Stroke Stroke")
ACME SCREW LINEAR ACUAOR CLA 20 OVERALL DIMENSIONS Stroke La = + Stroke La = + Stroke Rear bracket SP Pin FC switches and potentiometer Attachment A1 Attachment A2 Motor cable length 0.3 m Length Actuator
IN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
Proportional Directional Control Valves Series D*1FB. General Description. Features D91FB OBE
Technical Information Series D*1FB General Description Series D*1FB pilot operated proportional directional valves come in 4 sizes: D31FB NG10 (CETOP 5) D41FB NG16 (CETOP 7) D91FB NG25 (CETOP 8) D111FB
News 3/8-1/2-3/4-1 AND 1½ IMPACT SOCKETS SOCKETS, BIT SOCKETS, TORSION BARS, EXTENSIONS, ADAPTORS, UNIVERSAL JOINTS AND MORE
News 3/8 - /2-3/4 - ND ½ IMPT SOKETS SOKETS, IT SOKETS, TORSION RS, EXTENSIONS, DPTORS, UNIVERS JOINTS ND MORE POR IMPT SOKETS ND ESSORIES 3/8 IMPT SOKETS ND ESSORIES 6038 3/8 6-POINT METRI IMPT SOKETS
CS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE