Worm gear S 345. Properties: General: Single-stage worm gear For use in combination with our motors.
|
|
- Rosanna Dalton
- 6 years ago
- Views:
Transcription
1 S 345 Aluminium Power deviation 90 Options: Special shaft, 2nd shaft end Loading capacity Max. radial force N 100 Max. axial force N 50 Mounting Shaft diameter mm 6 Weight kg 1.2 Flange /05/CD-E/Sc-01 Last modified: 04/2013 Sc-01
2 S 567 Special design as a free-standing gear unit with ball-bearing ingoing shaft system housing with mounting possibilities from all accessible sides Power deviation 90, 2nd shaft end possible Options: Special shaft, 2 shaft end Loading capacity Max. radial force N 200 Max. axial force N 100 Mounting Shaft diameter mm 10 Weight kg 0.75 Foot , , Add-on gear Solo gear Sc-02
3 S 668 Special design as a free-standing gear unit with ball-bearing ingoing shaft Massive aluminum, mounting possibilities from all accessible sides Power deviation 90, 2nd shaft end possible Options: Special shaft, second shaft end Loading capacity Max. radial force N 200 Max. axial force N 100 Mounting Shaft diameter mm 10 Weight kg 0.8 Foot /05/CD-E/Sc-03 Sc-03
4 S 769 Special design as a free-standing gear unit with ball-bearing ingoing shaft Massive aluminum, mounting possibilities from all accessible sides Self-locking with great gear reduction Options: Special shaft, second shaft end Loading capacity Max. radial force N 300 Max. axial force N 150 Mounting Shaft diameter mm 12 Weight kg 0.82 Foot Sc-04
5 GS 1 Options: Second shaft end Loading capacity Max. radial force N 40 Max. axial force N 40 Mounting Shaft diameter mm 8 Weight kg /05/CD-E/Sc-05 Sc-05
6 GS 3 Slide bearing, optional ball bearing Options: Second shaft end Loading capacity Max. radial force N 60 Max. axial force N 40 Mounting Shaft diameter mm 10 Weight kg Sc-06
7 SC 401 Mounting on the drive side Ball bearing Options: 2. Shaft end Hollow shaft (Ømax.20 mm) Loading capacity Max. radial force N 500 Max. axial force N 260 Mounting Shaft diameter mm 16 Weight kg /05/CD-E/Sc-07 Sc-07
8 SC 401 F Mounting on the drive side Ball bearing Options: 2. Shaft end Hollow shaft (Ømax.20 mm) Loading capacity Max. radial force N 500 Max. axial force N 260 Mounting Shaft diameter mm 16 Weight kg /05/CD-E/Sc-09 Sc-09
9 SC 401 H Mounting on the drive side Ball bearing Hollow shaft Ø 14 H 7 (Ø max.20 mm) Loading capacity Max. radial force N 500 Max. axial force N 260 Mounting Shaft diameter mm 16 Weight kg Sc-08
Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationStandard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact
Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional
More informationFO, FL, G Series. Variable Stroke Straight Line Action Clamps Product Overview. FL Series. G Series. FO Series. Type of Mounting: Through hole mount
FO, FL, G Series Variable Stroke Straight Line Action Clamps Product Overview FO Series Type of Mounting: Foot Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and Plunger
More informationRotary Measurement Technology Encoder Accessories
Incremental encoder bracket (T8.58XX) 8.0010.7000.0010 Spring loaded right angle bracket for measuring wheels and rack and pinion systems Used with clamping flange 58 mm face mount screws included Incremental
More informationSERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS
INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection
More information6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
More informationV Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
More informationStandard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact
Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional
More informationAre you looking for specific bearing units in all kinds of different types from one single supplier? We make it easy for you to find the right one.
Are you looking for specific bearing units in all kinds of different types from one single supplier? We make it easy for you to find the right one. Plain Bearing Units Geometric Shape Range: Bushings,
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationPerformance Plus: Spiral Bevel Series
Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest
More information2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _
Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:
More informationSTH SERIES Hollow Rotary Index Tables
STH SERIES T he STH is an excellent fit for mid-range index table applications that require high accuracy, flexible mounting and a large hollow shaft. This product sets the standard for rotary positioning
More informationLength measurement system LMSLA12
Length measurement system LMSLA12 www.wachendorff-automation.com/lmsla12 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationSAMURAI Series. 51 Models. 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball. Ø1 - Ø12mm. Vol
SAMURAI Series Vol. 2-2011 4 Flutes Square 4 Flutes Corner Radius 2 Flutes Ball 51 Models Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
More informationFor applications with high axial play. For applications with reduced mounting space
Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000
More informationVulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
More information8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
More informationHigh Performance: Dyna-Lite Series
High Performance: Dyna-Lite Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna-Lite Series gearboxes to meet your needs. Page 4 provides a list of commonly requested
More informationKH Hypoid Series Precision Range Steel
KH Hypoid Series Precision Range Steel Compact hypoid gearheads Steel & aluminium construction ISO 9409 output flange with through bore 7 frame sizes from 064 up to 285 ISO output flange ideal for preloaded
More informationSemiflex Standard Symbiosis of performance and compact design. Semiflex. The Semiflex series
SE_S_1/06 compact design The Semiflex series Standard F series Bore diameter up to 120 mm Torque ( ) 44 Nm to 7.040 Nm Semiflex Semiflex is a high-precision coupling in a compact design and with no restoring
More informationRotative measurement Incremental rotary encoder RI-10S10C-2B500-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationSemiflex Compact Plus For extremely axially limited space. Semiflex. The Semiflex series
SE_CP_1/06 The Semiflex series Standard F series Symbiosis of performance and compact design Bore diameter up to 120 mm Torque ( ) 44 Nm to 7.040 Nm Semiflex Semiflex is a high-precision coupling in a
More informationSERIES PR90H PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS REFERENCE PR90H - C C - C. External diameter 58 mm
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationRecommended Torque Setscrews D-LOK Mounting Bolts Recommended Torque Standard Ball Bearing Insert. EZ-KLEEN Recom. Torque. Recom.
Bearing Reference ULTRA KLEEN E-Z KLEEN Extreme Duty Setscrew Ball Bearing GRIP TIGHT D-LOK Ball Bearing SELECTION Setscrew Ball Bearings Setscrew Key Hex Across Flats Recommended Setscrews D-LOK Mounting
More informationPerformances. Heavy duty, planetary to bevel, right-angle, servo gearbox. Up to 350 Nm rated 9
Up to 350 Nm rated 9 Mra line Heavy duty, planetary to bevel, right-angle, servo gearbox Backlash: from 15 to 5 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91%
More information38.1 Engine Main Parts Unit: mm (in.) Description Specification or Standard Repair Limit Service Limit
SPECIFICATIONS AND MAINTENANCE SERVICE SPECIFICATIONS AND 38 SPECIFICATIONS 1 AND MAINTENANCE 38.1 Engine Main Parts Description Specification or Standard Repair Limit Service Limit Cylinder compression
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationNEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e
Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue
More informationSPEED INCREASER GEARBOX FOR PUMPS GR.2 WITH EUROPEAN UNIFIED FLANGE
ML32 SPEED INCRESER GERBOX FOR PUMPS GR.2 WITH EUROPEN UNIFIED FLNGE 114 [4.4] 6 [3.77] 32.35 [1.273] 6.62 [3.41] 71.5 [2.15] N 4 M t.u. 13 [dept.51] -.5 -.1 Ø 2 [Ø 3.22 ] -.2 -.4 7.5 [.25] z14 DIN 542
More informationPerformances. Standard range dedicated to servo-applications requiring precision, robustness and economy. Up to 290 Nm rated 6
RATIO GROUP A: 1 stage, i = 4-5 - 7-10 2 stages, i = 16-20 - 25-28 - 35-40 - 49-50 - 70-100 RATIO GROUP B: 1 stage, i = 3-4 - 5-7 - 10 2 stages, i = 12-15 - 16-20 - 21-25 - 28-35 - 40-49 - 50-70 - 100
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationTable of contents. Attachments, accessories 161
Table of contents Attachments, accessories 6 Product overview Mounting kits for limit switches Mounting kits for proimity switches ocking devices Actuators Detents andles 60 6 Mounting kits for limit switches
More informationantriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
More informationTorsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001
RGFLEX Torsionally Stiff Steel Lamina Couplings features: innovative quality products large-scale service optimal cost-performance ratio certified according to DN SO 0 worldwide net of distribution www.ktr.com
More information5. Shift and Select Mechanism
5. Shift and Select Mechanism SHIFT AND SELECT MECHANISM! The shifter fork and fork rods have a detent mechanism using a plunger with a ball in it and is supported with a slidable ball bearing. The detent
More informationAEROSPACE BEARINGS. Plain Bearings. Self-Lubricated Journal Bearings Descriptions. Spherical Bearings Descriptions
Plain Bearings AEROSPACE BEARINGS Self-Lubricated Journal Bearings Descriptions Spherical Bearings Descriptions Self-Lubricated Rod Ends Descriptions SELF-LUBRICATED JOURNAL BEARINGS STRAIGHT ALUMINIUM
More informationTransmission, disassembling and assembling
Page 1 of 27 34-43 Transmission, disassembling and assembling Disassembly sequence Page 34-55. Transmission overview 1-1st gear 2-2nd gear 3-3rd gear 4-4th gear 5-5th gear 6 - Reverse gear Removing and
More informationCylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
More informationHydraulic gear pumps and motors
PL 01 T E DISPLCEMENTS From 0.07 in 3 /rev (1.07 cm 3 /rev) To 5.56 in 3 /rev (91.10 cm 3 /rev) Hydraulic gear pumps and motors through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationWorm geared motors. Orientation 6/2 Overview 6/3 Modular system. General technical data 6/4 Permissible radial force
Siemens AG 2011 Orientation /2 Overview /3 Modular system General technical data / Permissible radial force Geared motors up to 1.1 kw / Selection and ordering data Transmission ratios and maximum torques
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationtechnology made in Italy RS RT
technology made in Italy RS RT * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
More informationB SERIES. Helical bevel Gear Reducers
Helical bevel Gear Reducers FEATURES The technological content of -Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in
More informationCompactness meets High Power Density
Compactness meets High Power Density Single Stage Geared Motors for Industrial Applications www.abm-drives.com gearboxes Modern and Efficient Drive Technology Single Stage Geared Motors Advantages High
More informationOVERHAUL. 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance.
4168 OVERHAUL 410F701 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance. 0.10 to 0.40 mm (0.0039 to 0.0157 in.) 0.40 mm (0.0157 in.) C80538 2. INSPECT
More informationPiston rod attachments
Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationThe STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
More informationSUMMARY. Contents. Chapter
SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4 Selecting the gear unit...5 1.5 Service life of bearings...6
More informationSS902 Safety Station with Eyewash, Stainless Steel Bowl SS902P Safety Station with Eyewash, Plastic Bowl
Safety Stations SS902 Safety Station with Eyewash, Stainless Steel Bowl SS902P Safety Station with Eyewash, Plastic Bowl application: Combination eyewash and shower safety station. Two GS-Plus spray-type
More information8 MM SHAFT 12 MM SHAFT LOW SPEED HIGH TORQUE KS LINE
8 MM SHAFT 12 MM SHAFT LOW SPEED HIGH TORQUE KS LINE THE COMPACT SOLUTION FOR HIGH TORQUE A NEW DEFINITION OF EFFICIENCY With only 48 or 57 mm lenght, you can obtain 60 and 100 Nm torque, with an efficency
More informationLVElectric Motors Basics
LVElectric Motors Basics Selection of electric motors has to be made using 3 different categories : By its electric design. By its mechanical design. By its insulation system The most important features
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationSwivel Joint Heads (Basic Unit)
Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal
More informationMICRO CUP HOLDERS
MICRO CUP HOLDERS 0 80 05 - Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
More informationtechnology made in Italy
technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
More informationCatalogue Spare Parts BV206-BV208
Catalogue Spare Parts BV206-BV208 Lightweight Type Rubber Track II 620*90.6*64 Item No: TTG RB002 Material: Rubber +45# Iron BV206: 4pcs Weight: 185kg OEM: 2536122-801 2.590 Tilt Cylinder Item No: TTG
More informationPiston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston
More informationComponents for parallel kinematics
Components for parallel kinematics Series GLK, GLK 2, GLK 3 and GLAE Parallel kinematic components consist of a number of parallel, longitudinally adjustable mechanical struts that are arranged between
More informationOVERHAUL. 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance.
41135 OVERHAUL 4108901 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance. 0.10 0.40 mm (0.0039 0.0157 in.) C68252 2. INSPECT 2ND GEAR THRUST CLEARANCE
More informationHG + New hollow shaft precision
ew hollow shaft precision The successor to our versatile hypoid gearhead with hollow shaft on one/both sides. With the, low torsional backlash and high torsional rigidity assure maximum positioning accuracy
More informationBSERIES. Helicalbevel GearReducers
Helicalbevel GearReducers Features The technological content of B-Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloidal gear boxes Planetary gear boxes evel gear boxes Planetary bevel gear boxes Hypoid gear boxes Gear technology Eppinger hypoid gear boxes
More informationGusher s s Advantages
Gusher s s Advantages R&D in Pump design Gusher s s Advantages Gusher Vertical Cantilever Pumps up to 15,000 GPM Gusher Vortex Pumps Special Mounting Plates Gusher SC-CC CC Stainless & Cast Iron Gusher
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloid gearboxes Planetary gearboxes evel gearboxes Planetary bevel gearboxes Hypoid gearboxes Gear technology Eppinger hypoid gear boxes The compact
More informationDIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationPNEUMATIC RADIAL PISTON MOTOR
EasyDrive 4 Product features Start / stop under full load possible Maximum torque from starting available Overload protected Maintenance free Low noise level Minimised air consumption at high performance
More informationSeries 45 anti-rotation guide units
> Series 45 guide units CATALOGUE > Release 8.7 Series 45 anti-rotation guide units For cylinders DIN/ISO 6432 - ø2, 6, 20, 25mm For cylinders DIN/ISO 643 - ø32, 40, 50, 63, 80, 00mm» To be used with VDMA/
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationRadial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
More informationPrecision Bourdon tube pressure gauges
Pressure gauges Precision pressure gauges High accuracy (class 0.6) Housing can be plumbed Serial number on dial Suitable as measuring equipment as per QA requirements DNV- and GOSSTANDART-certified A
More informationOpen continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
More informationXMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
More information860C/870C/L870C FELLER BUNCHERS
860C/870C/ FELLER BUNCHERS The C-series feller bunchers Tigercat 860C, 870C and feller bunchers are high production, extreme duty, final fell machines. They are well suited to large timber, mixed stands,
More informationTECHNICAL DATA & DRAWINGS
6 TOP ONLY 6 TOP - 6 BOTTOM STANDARD 6" TOP - 6" BOTTOM with M20 DOME OPENING 6 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 50 (63mm piping) 6 TOP - 6 BOTTOM, 2 SIDE CONNECTIONS DN 80 (90mm piping) DN200 TOP
More information12.1 SINGLE ROW BALL BEARINGS
12.1 SINGLE ROW BALL BEARINGS Due to the versatility of applications, single row ball bearings are among the most frequently used types of rolling bearings. They are made as non-separable without a filling
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More informationRotative measurement Incremental rotary encoder Ri-10S10C-2B5000-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
More informationHT hypoid bevel gear boxes
HT hypoid bevel gear boxes Solid and Hollow Shaft Design Zykloidgetriebe Planetengetriebe Kegelrad-Planetengetriebe Kegelradgetriebe Hypoidgetriebe Hypoid-Stirnradgetriebe Getriebemotoren Verzahnungsentwicklung
More informationA double-wishbone type suspension is used in the front. A multi-link type suspension is used in the rear. Tread* mm (in.) 1560 (61.
CHASSIS SUSPENSION AND AXLE CH-69 SUSPENSION AND AXLE SUSPENSION 1. General A double-wishbone type suspension is used in the front. A multi-link type suspension is used in the rear. 08D0CH111Z Specifications
More informationLinear Actuator with Ball Screw and Extending Rod Series OSP-E..SBR. Contents Description Overview Technical Data Dimensions 110
Linear Actuator with Ball Screw and xtending Rod Series OSP-..SBR Contents Description Page Overview 103-106 Technical Data 107-109 Dimensions 110 103 The System Concept LCTRIC LINAR ACTUATOR FOR PRCIS
More informationRotative measurement Incremental rotary encoder Ri-10S10C-2B1000-H1181
Clamping flange, Ø 58 mm Solid shaft, Ø 10 mm x 20 mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationDCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors mm - 5 W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP5 In accordance with U - CE - ROHS regulations Part numbers V V V Type 95
More informationSafeSet Torque-limiting Safety Coupling
Torque-limiting Safety Coupling Voith Turbo Safeset We are the experts in torque-limiting and connection couplings at Voith Turbo. Voith Turbo, the specialist for hydrodynamic drive, coupling and braking
More informationDCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationBATHROOM EXTRACT FANS DECOR-100 Series
DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon
More informationList of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
More informationalphira Economical entry-level model
Economical entry-level model The low backlash planetary gearhead with output shaft. This economical entry level model is suitable for simple applications. The impresses through its quality, availability,
More informationREEL WINDERS & REELS STRINGING EQUIPMENT CATALOGUE
REEL WINDERS & REELS STRINGING EQUIPMENT CATALOGUE HYDRAULIC REEL WINDER Model: HTB + HTB/D + HTB/E Operation range: Hydraulic reel winder powered by ZECK Puller-Tensioner, hydraulik power unit or truck
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationEIPC3 EIPC5 INTERNAL GEAR PUMPS EIPC5 NEW!
EIPC3 EIPC5 INTERNAL GEAR PUMPS new Generation EIPC new technology up to 320 bar industrial version aluminium housing noise-optimized multi-flow-pumps with common suction port NEW! EIPC5 Internal gear
More informationPAH, PAHT, PAHT G pumps PAH , PAHT and PAHT G Disassembling and assembling
Servie guide PAH, PAHT, PAHT G pumps PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5 Disassembling and assembling hpp.danfoss.com Table of Contents 1. Disassembling the pump...3 2. Inspection...7 2.1. Port
More informationEFFICIENCY PERFECTED. DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5. Feed force [N] Feed speed [m/s]
EFFICIENCY PERFECTED DYNAGEAR DG ECOSYSTEM - FORCES AND SPEEDS with helical teeth and ratio i=5 2000 TEETH RATIO i = 5 Feed force [N] 0000 8000 6000 4000 DE-DG5 m4 DE-DG5 m DE-DG90 m DE-DG90 m2 DE-DG75
More information