SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information

Transcription

1 Alsident System100 Aluminium (AL) Product Information

2

3 System 100 Aluminium (AL) General Information Product Specification Product Description System 100 Aluminium Alsident System airflow between m 3 /h System 100 Aluminium is suitable in non-aggressive working environments where large air volumes are required and where there are no special requirements for chemical resistance or antistatic abilities such as laboratories, hospitals, chemical-, pharmaceutical- and food industry, universities and engineering industries. The standard Alsident System extraction arms are available in various types which are complementary to each other with ranges up to 2630 mm. The System extraction arms are easily mounted with standard brackets for table, wall or ceiling. In combination with the range of hood designs this makes it possible to choose an extraction arm adapted for any work situation. Alsident System extraction arms are self-sustaining with an internal bearing spring, joints of polypropylene (PP) and tubes of anodized aluminium with a diameter of 100 mm. All internal components are of acid-proof stainless steel (AISI 316L). The shortest model is supplied with an internal spring, whereas the longest model is supplied with one or two external gas springs. The construction constitutes a very user-friendly extraction arm which is easy to adjust to the source of the pollutant during the working process. An extraction arm from Alsident System consists of three parts: An extraction arm, a hood and a mounting bracket. Each part must be ordered separately. In addition to the standard range, Alsident System offers special customized solutions. The Alsident technical department is always ready to help you find the best solution. Alsident offers short delivery time for both standard productions and special solutions. GI 01

4 System 100 Aluminium (AL) General Information Product Specification Technical Specifications Recommended Airflow: Normal: 270 m 3 /h Air Temperature: Key to the signatures SYSTEM NO. 100 VERSION AL Minimum: 140 m 3 /h Maximum: 400 m 3 /h -15 C +90 C Material: Pipes: Anodized Aluminium (10 µ) Joint: O-ring: Flange: Damper: Thumbscrew: Aluminium Polypropylene (PP) white Polyethylene (PE) white Polypropylene (PP) white Polypropylene (PP) Polypropylene (PP) black Threaded Stay: Acid-proof stainless steel (AISI 316L) Spring 1 : Acid-proof stainless steel (AISI 316L) Gas spring 2 : Steel 1) Used for arm types up to ) Used for arm types , and Abbr.: PP: Polypropylene Shatterproof and chemical resistant Technical Reports Technical Reports: PE: PETG: Polyethylene Polyethylene Therephthalat, Glycol-modified Transparent and resistant to solvents Local Extraction for workplaces incl. all materials for mounting. All components RoHS-compatible according to the directive 2002/95/EF (RoHS). Capture Efficiency (Danish Technological Institute) Download: > Technical Support > Test Reports CHAPTER GI TM WM WCM General Information Table mounted Wall mounted Wall/Ceiling mounted PAGE NO. 01 GI 02

5 System 100 Aluminium (AL) General Information Product Overview Table mounted Table mounted (TM), 2-Joint Diam. Diam. L A B C Weight appr. [kgs] Part No ) 3) ) 3) ) With 1 gas spring 2) With 2 gas springs 3) With handle on B-pipe L Table mounted (TM), 3-Joint Matching mounting brackets U-profile Part No See page GI 09 B C Wall Bracket Part No See page GI 09 Weight appr. [kgs] Part No GI 03

6 System 100 Aluminium (AL) General Information Product Overview Wall mounted Wall mounted (WM), 2-Joint Diam. L B C Weight appr. [kgs] Part No Wall mounted (WM), 3-Joint Diam. L A B C Weight appr. [kgs] Part No ) 3) ) 3) ) 3) ) With 1 gas spring 2) With 2 gas springs 3) With handle on B-pipe Special Stop for Gas Spring Part No See page GI 08 Matching mounting brackets Wall Bracket Part No See page GI 09 Square Wall Bracket Not applicable with this model. See page GI 05 GI 04

7 System 100 Aluminium (AL) General Information Product Overview Wall and Ceiling mounted Wall/Ceiling mounted (WCM), 3-Joint Dia. L A B C Weight appr. [kgs] Part No ) 3) ) 3) ) 3) ) With 1 gas spring 2) With 2 gas springs 3) With handle on B-pipe Special Stop for Gas Spring Part No See page GI08 Matching mounting brackets Square Wall Bracket Part No See page GI09 Ceiling columns See page GI10 GI 05

8 System 100 Aluminium (AL) General Information Accessories Overview Metal Hood (diam. 200 mm) Part No.: Recommended when extracting hot gases, fumes, light dust concentrations etc. The powder coated surface improves the durability of the hood. Material Metal Hood: Aluminium (powder coated) Connection tube: Aluminium (Anodized 10 µ) Metal Hood (diam. 200 mm) Part No.: Recommended when extracting hot gases, fumes, light dust concentrations etc. Suitable for autoclaving. Material Metal Hood: Aluminium (Anodized 10µ) Connection tube: Aluminium (Anodized 10 µ) Dome Hood (diam. 385 mm) Part No.: Recommended for light fumes, gases and small open vessels. Increased stability due to reinforced rim of the hood. Increased efficiency at an angled position. Material Hood: PETG Flange: Polypropylene (PP) Connection to tube 1 : Aluminium (Anodized 10µ) 1) Separately enclosed at delivery GI 06

9 System 100 Aluminium (AL) General Information Accessories Overview Hood (diam. 500 mm) Part No.: Recommended for light fumes, gases and large open vessels. Increased stability due to reinforced rim of the hood. Increased efficiency at an angled position. Material Hood: PETG Flange: Polypropylene (PP) Connection to tube 1 : Aluminium (Anodized 10µ) 1) Separately enclosed at delivery Metal Hood (diam. 350 mm) Part No.: Recommended for large concentrations of dust, hot fumes and gases. Increased efficiency at an angled position. Material Hood: Aluminium (powder coated alu) Flange: Polypropylene (PP) Connection to tube 1 : Aluminium (Anodized 10µ) 1) Separately enclosed at delivery Metal Hood (diam. 350 mm) Part No.: Recommended for large concentrations of dust, hot fumes and gases. The powder coated surface improves the durability of the hood. Increased efficiency at an angled position. Material Hood: Aluminium (powder coated white) Flange: Polypropylene (PP) Connection to tube 1 : Aluminium (Anodized 10µ) 1) Separately enclosed at delivery GI 07

10 System 100 Aluminium (AL) General Information Accessories Overview Flat Hood (420 x 280 mm) Part No.: Recommended when extracting heavy gases and fumes. High efficiency when placed vertically on a surface e.g. a table. Practical rim for easy positioning of the hood. Gets close to the source without obstructing the work process. Material Hood: PETG Flange: Polypropylene (PP) Connection to tube 1 : Aluminium (Anodized 10µ) 1) Separately enclosed at delivery Protective Grill (for hoods) Part No.: 5-18 Protective Grill for mounting in hood. Prevents extraction of foreign materials. Material: Colour: Polypropylene (PP) White Special Stop for gas spring Part No.: Can be mounted on models with an external gas spring. Prevents the extraction arm from touching a suspended ceiling when folded up. The stop for gas spring can be retrofitted and placed individually on the gas spring. GI 08

11 System 100 Aluminium (AL) General Information Accessories Overview Wall Bracket Part Nos.: /-22 Used for System 100 Wall or Table Mounted Extraction Arms. The wall bracket is made of steel with a white polyester powder coated surface or acid-proof stainless steel (AISI 316 L). Other colours available on request. Connect to duct (125 mm dia.) with the enclosed reducer. Material U-Profile Part No.: Used for reinforcement of the socket pipe when mounting a System 100 extraction arm in the table plate. The U-Profile can be mounted both above or under table plate. Made of steel with a white polyester powder coated surface and an extra flange. Other colours for the U-profile available on request. Reducer Part No.: Used to connect System100 Extraction Arms to duct. Made of white polypropylene (PP). Reduces from Ø125 to Ø100. Part No. Powder coated Acid-proof stainless steel (AISI 316 L) Square Wall Bracket Part No.: Used for wall mounting of System 100 Wall and Ceiling Mounted Extraction Arms. The square wall bracket is made of steel with a white polyester powder coated surface. Other colours available on request. Connect to duct (125 mm dia.) with the enclosed reducer. GI 09

12 System 100 Aluminium (AL) General Information Accessories Overview Ceiling Columns Used for mounting the System 100 Wall/Ceiling Mounted Extraction Arms. The ceiling column is made of white polyester powder coated steel. Available in two models with side connection or top connection to duct. Standard lengths see below. Other lengths, colours and acid-proof stainless steel (AISI 316 L) available on request. Connection diameter: 125 mm Length Weight app. [kg] Top connection Side connection *) Avaliable on request , * * Support Bracket for long ceiling column Part No.: For extra support of long ceiling columns. For support with wire to deck or by fastening to ceiling rail system. The support bracket is made of steel with a white polyester powder-coating. Other colours available on request. Dimensions Internal: 150 x 150 mm External: 250 x 250 mm Cover Flange Part No.: Made to cover the perforation through a concealed ceiling. To be glued on to the concealed ceiling around the ceiling column. Dimensions Internal: 150 x 150 mm External: 250 x 250 mm GI 10

13 System 100 Aluminium (AL) General Information Technical Description Pressure Drop Chart Tested by Danish Technological Institute GI 11

14 System 100 Aluminium (AL) General Information Spare Parts List Joint with Damper Joint with Damper Pos. Product No. AA Pos. Part No. Description A Joint A Joint O-ring ,2-18 Washer Thumbscrew, 5 mm Threaded Stay Thumbscrew, 4 mm Wing for damper Damper Seegerring GI [Anvendt antal]

15 System 100 Aluminium (AL) Table mounted (TM) Working Area Table mounted with Hood Ø200 mm A: Model R: 795 mm B: Model R: 1040 mm C: Model R: 1185 mm D: Model R: 1370 mm E: Model R: 1710 mm F: Model R: 2130 mm Accessory: Hood No Note: The working area of the arm is defined from the center of the opening of the accessory. The working area changes according to type of accessory and positioning. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) TM 01

16 System 100 Aluminium (AL) Table mounted (TM) Mounting Options Table Mounting with U-profile above table Dimensions (all measurements in mm) Placed above table System 100 extraction arm mounted on a table with U-profile placed above table. Accessory: U-Profile, Part No.: MOUNTING INSTRUCTION On-line video or pdf TM 02

17 System 100 Aluminium (AL) Table mounted (TM) Mounting Options Mounting with U-Profile under table Dimensions (all measurements in mm) Placed under the table System 100 extraction arm mounted on a table with U-profile placed under the table. Accessory: U-Profile, Part No.: MOUNTING INSTRUCTION On-line video or pdf TM 03

18 System 100 Aluminium (AL) Table mounted (TM) U-Profile Technical Description Part No.: Dimensions (all measurements in mm) Used for reinforcement of the socket pipe when table mounting a System 100 extraction arm in table plate. The U-profile can be placed both above or under table plate. Made of steel with a white polyester powder coated surface and an extra flange. Other colours for the U-profile available on request. TM 04

19 System 100 Aluminium (AL) Table mounted (TM) Mounting Options Table Mounting with Wall Bracket Table mounted with Wall Bracket System 100 extraction arm mounted standing in a Wall Bracket. Accessory: Wall Bracket, Part No.: /-22 Material Dimensions (all measurements in mm) Part No. White powder coated Acid-proof stainless steel (AISI 316 L) MOUNTING INSTRUCTION On-line video or pdf TM 05

20 System 100 Aluminium (AL) Table mounted (TM) Wall Bracket Technical Description Part No.: /-22 Used for System 100 Wall or Table mounted extraction arms. The wall bracket is made of steel with a white polyester powder coated surface or acid-proof stainless steel (AISI 316L). Other colours available on request. Connect to duct (125 mm dia.) with the enclosed reducer. Material Dimensions (all measurements in mm) Part No. White powder coated Acid-proof stainless steel (AISI 316 L) TM 06

21 System 100 Aluminium (AL) Table mounted (TM) Spare Parts (A) (B) (C) (D) (E) (F) For Spare Parts List see next page. TM 07

22 System 100 Aluminium (AL) Table mounted (TM) Spare Parts List Pos. Product No. Joints A joint B joint C joint D joint E joint F joint Pos. Part No. Description A B C D E F C-pipe 580, short C-pipe 580, long Spring 5 mm Spring 6 mm Gas spring 180 N Gas spring 250 N O-ring B-pipe B-pipe B-pipe B-pipe B-pipe Threaded Stay Thumbscrew ,2-18 Washer Gas spring 100N (push) Thumbscrew, 5 mm A-pipe A-pipe A-pipe A-pipe A-pipe Joint with Damper* *) Spare Parts List for Joint with Damper see General Information When ordering spare parts please quote: Product No. e.g Description - B-pipe 550 Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. TM 08

23 System 100 Aluminium (AL) Wall mounted (WM) Working Area Wall mounted with Hood Ø200 mm A: Model R: 795 mm B: Model R: 1040 mm C: Model R: 1185 mm D: Model R: 1370 mm E: Model R: 1710 mm F: Model R: 2130 mm G: Model R: 2630 mm Accessory: Hood No Note: The working area of the arm is defined from the center of the opening of the accessory. The working area changes according to type of accessory and positioning. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) WM 01

24 System 100 Aluminium (AL) Wall mounted (WM) Mounting Options Wall Mounting (all measurements in mm) Wall mounting System 100 wall mounted extraction arm in wall bracket. Accessory: Wall Bracket, Part No.: /-22 Material Dimensions Part No. White powder coated Acid-proof stainless steel (AISI 316 L) MOUNTING INSTRUCTION On-line video or pdf WM 02

25 System 100 Aluminium (AL) Wall mounted (WM) Wall Bracket Technical Description Part No.: /-22 Used for System 100 wall or table mounted extraction arms. The wall bracket is made of steel with a white polyester powder coated surface or acid-proof stainless steel (AISI 316L). Connect to duct (125 mm dia.) with the enclosed reducer. Material Dimensions (all measurements in mm) Part No. White powder coated Acid-proof stainless steel (AISI 316 L) WM 03

26 System 100 Aluminium (AL) Wall mounted (WM) Mounting Options Wall Mounting (Square) Dimensions Wall Mounted (all measurements in mm) Wall mounting in square wall bracket System 100 Wall/Ceiling mounted extraction arm mounted in square wall bracket. Accessory: Wall bracket (square), Part No.: Wall Mounting (HMS) MOUNTING INSTRUCTION On-line video or pdf WM 04

27 System 100 Aluminium (AL) Wall mounted (WM) Square Wall Bracket Technical Description Part No.: Dimensions 150 x 150 (all measurements in mm) Square Wall bracket for wall mounting of System 100 wall and ceiling mounted extraction arms. The square wall bracket is made of steel with a white polyester powder coated surface. Other colours available on request. Connect to duct (125 mm dia.) with the enclosed reducer WM 05

28 System 100 Aluminium (AL) Wall mounted (WM) Spare Parts (A) (B) (C) (D) (E) (F) (G) (D: 6a) For Spare Parts List see next page. 7 1 WM 06

29 System 100 Aluminium (AL) Wall mounted (WM) Spare Parts List Pos. Product No. joint A B C D E F G Joint Joint Joint Joint Joint Joint Joint *) Spare Parts List for Joint with Damper see General Information When ordering spare parts please quote: Product No. e.g Description - B-pipe 450 Part No Quantity - 1 pc. Note: Spare Parts List for extraction arm mounted in square wall bracket. See pages CM 04 and CM 05. Pos. Part No. Description A B C D E F G [Pieces applied] C-pipe 580, short C-pipe 580, long Spring 5 mm ,5-00 Spring 6,5 mm Gas spring 200N (Pull) Gas spring 230N (Pull) Gas spring 260N (Pull) O-ring B-pipe B-pipe B-pipe B-pipe B-pipe B-pipe Threaded Stay a Threaded Stay, 8 mm Thumbscrew Washer Gas spring 100N (push) Thumbscrew, 5 mm A-pipe A-pipe A-pipe A-pipe A-pipe A-pipe Joint with Damper* If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. WM 07

30 System 100 Aluminium (AL) Wall/Ceiling mounted (WCM) Working Area Ceiling mounted with Hood Ø200 mm A: Model R: 1185 mm B: Model R: 1370 mm C: Model R: 1710 mm D: Model R: 2130 mm E: Model R: 2630 mm Tilbehør: Accessory: Sugespids Hood Nr. No Note: The working area of the arm is defined from the center of the opening of the accessory. The working area changes according to type of accessory and positioning. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) WCM 01

31 System 100 Aluminium (AL) Wall/Ceiling mounted (WCM) Mounting Options Ceiling Mounting Dimensions (all measurements in mm) Ceiling Mounting System 100 Extraction arm mounted in ceiling column with side connection. Accessory Ceiling column. Part no. depending on length. MOUNTING INSTRUCTION On-line video or pdf WCM 02

32 System 100 Aluminium (AL) Wall/Ceiling mounted (WCM) Ceiling Column Technical Description Ceiling Columns Used for mounting the System 100 Wall/Ceiling Mounted Extraction Arms. The ceiling column is made of white polyester powder coated steel. Available in two models with side connection or top connection to duct. Standard lengths see below. Other lengths, colours and acid-proof stainless steel (AISI 316 L) available on request. Connection diameter: 125 mm Length Weight app. [kg] Top connection Side connection * * *) Available on request Dimensions (all measurements in mm) WCM 03

33 System 100 Aluminium (AL) Wall/Ceiling mounted (WCM) Spare Parts (A) (B) (C) (D) (E) (F) (C: 6a) a For Spare Parts List see next page. WCM 04

34 System 100 Aluminium (AL) Wall/Ceiling mounted (WCM) Spare Parts List Pos. Product No. joint A B C D E F Joint Joint Joint Joint Joint Joint Pos. Part No. Description A B C D E F C-pipe 440, short C-pipe 440, long Spring 5 mm ,5-00 Spring 6,5 mm Gas spring 200 N (pull) Gas spring 230 N (pull) Gas spring 260 N (pull) O-ring B-pipe B-pipe B-pipe B-pipe B-pipe B-pipe Threaded Stay a Threaded Stay, 8 mm Thumbscrew ,2-18 Washer Gas spring 100N (push) Thumbscrew, 5 mm A-pipe A-pipe A-pipe A-pipe A-pipe A-pipe Joint with Damper* *) Spare Parts List for Joint with Damper see General Information When ordering spare parts please quote: Product No. e.g Description - A-pipe 650 Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. WCM 05