Extraction arm FX100 Original

Transcription

1 Bench top extraction systems for all environments. The Nederman bench top systems can be used in every type of environment, from assembly stations, where soldering fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital. Bench top extraction systems are available both as complete packages and as individual components. A customised bench top extraction system consists of an extraction arm always with a mini hood (universal interface for other hoods), completed with different accessories such as brackets, extension arm, reducers, hoses etc. These parts are ordered separately. A bench top extraction system can be connected to a single extraction fan filter N3, or to a central extraction fan/filter. Unique maneuvrability with 360 rotation Optimal efficiency and low noise Ceiling, wall, floor or bench mounting Damper included Product name Noise level (db(a)) Installation Material Extraction arm FX100 Original 62 db(a) at 450 m3/h Indoor Aluminium, anodized. Joints in PP. Fume temperature Max 70 C (158 F) Extraction arm diameter (in) 4 Airflow (cfm) /17/2017

2 Description Arm length (ft) Weight (lbs) Model FX Ø100 Original, Connection double 3ft11in FX Ø100 Original, Connection up FX Ø100 Original, Connection up /17/2017

3 Accessory Part No FX-Bracket kit-d50/75/100-l190. Complete mounting kit, with the classic bracket,190 mm (7.48 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms with 250mm from the vertical centre line of the arm to the wall FX-Classic bracket-d50/75/100. The classic bracket should be used together with Cut2fit extension profile for mounting FX2 50/75/100 arms on the ceiling, wall, floor or on top of other horizontal surface. FX-Cut2fit extension-l1100. Cut2fit extension could be cut at any length and should be assembled together with the classic bracket for mounting FX2 50/75/100 arms on the ceiling or wall. FX-Cut2fit extension-l2200. Cut2fit extension could be cut at any length and should be assembled together with the classic bracket for mounting FX2 50/75/100 arms on the ceiling or wall FX2-Bench bracket kit-d50/75/100, Complete mounting kit for mounting FX2 50/75/100 arms on the bench edge FX-Ceiling cover plate. Cover false/dropped ceiling openings caused by both extension profile and ducting Support collar FX-Combi hood-original-d50/75/100. Transparant combi hood, made of PET-G plastic, arms is designed to capture contaminants with low energy. It can be attached directly on minihood, irrespective of arm size. The ergonomics of handle design on both sides of the hood make it easier to maneuver. FX-Metal hood-orig/chem-d50/75/100. Powder coated white metal hood, made of aluminum, is designed to capture contaminants in high temperature, aggressive fume where corrosion resistance must be assured or dust splatter. It can be attached directly on minihood, irrespective of arm size. FX-Flange hood-original-d50/75/100. Transparent flange hood, made of PET-G plastic, is designed to maximize the capture zone without hinder objects on the bench or the user. It can be attached directly on minihood, irrespective of arm size. FX-Dome hood-original-d50/75/100. Transparent dome hood, made of PET-G plastic, is designed to capture high dispersion contaminants. It can be attached directly on minihood, irrespective of arm size. The ergonomics of handle design on both sides of the hood make it easier to maneuver Reduction Kit Ø Reduction Kit Ø /17/2017

4 Sound level X: airflow m³/h, Y: Sound level (db A) Pressure Drop X: airflow m³/h, Y: static pressure Pa Position of arm when measured Pressure Drop 4 8/17/2017

5 Measures and Model number Note: Different spring mechanism are fitted depending on connection direction FX arms, connection Down. Floor mounted and Bench mounted FX arms, connection Up. Wall mounted and Ceiling mounted Connection Directions 1) FX arm with ventilation connection downwards 2) FX arm with ventilation connection upwards 5 8/17/2017