BenchTop Extraction Arm FX2
|
|
|
- Spencer Stone
- 5 years ago
- Views:
Transcription
1 The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight anodized aluminium sections, with three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required. With the profiles made of anodized aluminum with a white electrophoretic deposition coating, the arm is ideal for fume extraction in aggressive environments where corrosion resistance must be assured. Optimal efficiency and low noise provides safe and quiet working environment Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility The two outermost arm joints can rotate and swivel through 360, which gives the unique maneuverability The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability Highly integrated products that save customers time and costs, as well as providing the reliability and functionality to deliver a better performance Product name Noise level (db(a)) Installation Material BenchTop Extraction Arm FX2 100 CHEM 62 db(a) at 450 m3/h Indoor Fume temperature max 70 C Extraction arm diameter (mm) 100 Airflow (m3/h) Arm length (m) Tubes in anodized aluminium with a white electrophoretic deposition coating. Joints in PP plastic. Duct connector in EPDM rubber. Minihood in PP plastic
2 Image Description Weight (kg) Model FX2-CHEM-D100-L1200-Up/Down-Low 4, FX2-CHEM-D100-L1200-Up-PLUS 5, FX2-CHEM-D100-L1200-Up/Down-Through 4, FX2-CHEM-D100-L1800-Up-Low 5, FX2-CHEM-D100-L1800-Up-PLUS 7, FX2-CHEM-D100-L1800-Down-Low 5, FX2-CHEM-D100-L1800-Down-Through 5, FX2-CHEM-D100-L2400-Up-Low 6, FX2-CHEM-D100-L2400-Up-PLUS 8,
3 Accessory Part No FX-Bracket kit-d50/75/100-l190. Complete mounting kit, with the classic bracket,190 mm (7.48 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms with 250mm from the vertical centre line of the arm to the wall FX2-Bracket kit-d50/75/100-l500. Complete mounting kit, with the classic bracket, 500mm (19.68 inch) extension profile and associated parts, for mounting FFX2 50/75/100 arms on the ceiling. FX2-Wall BRKT kit-flat-l190-white. Complete mounting kit, with flat wall bracket,190 mm (7.48 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms with 250mm from the vertical centre line of the arm to the wall. FX2-Wall-P BRKT kit-d50/75/100-l190. Complete mounting kit for mounting FX2 50/75/100 plus arms with 250 mm (9.84 inch) from the vertical centre line of the arm to the wall FX2-Bench bracket kit-d50/75/100, Complete mounting kit for mounting FX2 50/75/100 arms on the bench edge FX-Classic bracket-d50/75/100. The classic bracket should be used together with Cut2fit extension profile for mounting FX2 50/75/100 arms on the ceiling, wall, floor or on top of other horizontal surface. FX-Cut2fit extension-l1100. Cut2fit extension could be cut at any length and should be assembled together with the classic bracket for mounting FX2 50/75/100 arms on the ceiling or wall. FX-Cut2fit extension-l2200. Cut2fit extension could be cut at any length and should be assembled together with the classic bracket for mounting FX2 50/75/100 arms on the ceiling or wall FX-Ceiling cover plate. Cover false/dropped ceiling openings caused by both extension profile and ducting FX2-Ceiling cover plate-plus, Cover false/dropped ceiling opening caused by tube FX-Combi hood-chem-d50/75/100. Corrosion resistant combi dome hood, made of PE, for FX2 50/75/100 arms is designed to capture capture low energy and aggreesive contaminants. The ergonomics of handle design on both sides of the hood make it easier to maneuver. FX-Dome hood-chem-d50/75/100. Corrosion resistant white dome hood, made of PE plastic, is designed to capture high dispersion and aggreesive contaminants. It can be attached directly on minihood, irrespective of arm size. The ergonomics of handle design on both sides of the hood make it easier to maneuver. FX-Metal hood-orig/chem-d50/75/100. Powder coated white metal hood, made of aluminum, is designed to capture contaminants in high temperature, aggressive fume where corrosion resistance must be assured or dust splatter. It can be attached directly on minihood, irrespective of arm size. FX-Flange hood-chem-d50/75/100. Corrosion resistant white flange hood, made of PE plastic, is designed to maximize the capture zone without hinder objects on the bench or the user. It can be attached directly on minihood, irrespective of arm size. FX2-Duct connector-orig/chem-d100. Grey duct connector to ease the coupling of 100mm (4 inch) Alu duct to external 125mm (5 inch) ductwork. Please note all arms are already supplied with a duct connector as standard. FX2-Al duct-l1000-d75/100tod100-wht. Corrosion resistant white duct with 100 mm (4 inch) diameter and 1000 mm (39.37 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 75/100 arms. The duct is made of anodized aluminum with a white electrophoretic deposition coating which ensure good corrosion resistance. This is a good looking alternative to standard, ventilation duct. FX2-Al duct-l2000-d75/100tod100-wht. Corrosion resistant white duct with 100 mm (4 inch) diameter and 2000 mm (78.74 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 75/100 arms. The duct is made of anodized aluminum with a white electrophoretic deposition coating which ensure good corrosion resistance.this is a good looking alternative to standard, ventilation duct FX-Hose-D100-L3000-Grey- Flexible hose in grey PVC with 100 mm (4 inch) diameter and 3000 mm ( inch) length. It shall be used with hose support ring to connect hose to arm. FX-Hose D125-L5000-Grey- Flexible hose in grey PVC with 125 mm (5 inch) diameter and 5000 mm ( inch) length. It shall be used with hose support ring to connect hose to arm. FX2-Hose support ring-d100. Place into the 100 mm (4 inch) hose to support the connection between the hose and the duct connector of the arm. A must to connect the hose to arm
4 Accessory Part No FX2-Hose support ring-d125. Place into the 125 mm (5 inch) hose to support the connection betwen the hose and the duct connector of the arm. A must to connect the hose to arm
5 Sound Level diagram: 1) X- Axis: Air Flow Rate (cfm) 2) X- Axis: Air Flow Rate (m/h) 3) Y-Axis: Sound Pressure Level (db) (A)) Pressure Drop diagram: 1) X- Axis: Air Flow Rate (cfm) 2) X- Axis: Air Flow Rate (m/h) 3) Y-Axis: Static Pressure Drop (Pa) 4) Y-Axis: Static Pressure Drop (in. wg.)
6 Material: 1) Flange: PP 2) Tubes: Aluminum: anodized 10 µm, with white electrophoretic deposition coating 3) Damper adjustment handle: Aluminum: anodized 10 µm Internal spring: Staineless steel Damper blade: Conductive TP & PP plastic 4) Joints: PP with glass fibre reinforcement Plastic rings: PP with glass fibre reinforcement Axial locking rings: PP with glass fibre reinforcement Adjustment knobs: PA & EDS plastic Threaded shaft inside joints: Stainless Steel 5) Duct connector: EPDM Rubber 6) Swivel: Aluminum, powder coating Rivets: Aluminum Bearings swivel: PP with glass fibre reinforcement
7 FX2-CHEM-D100-L1200-Up/Down-Low Part number: Max. working radius: 1170 mm (46,1 in) A: 450 mm (17,7 in) B: 450 mm (17,7 in) FX2-CHEM-D100-L1800-Down-Low Part number: Max. working radius: 1770 mm (69,7 in) A: 750 mm (29,5 in) B: 750 mm (29,5 in)
8 FX2-CHEM-D100-L1200-Up/Down-Through Part number: Max. working radius: 1170 mm (46,1 in) A: 450 mm (17,7 in) B: 450 mm (17,7 in) FX2-CHEM-D100-L1800-Down-Through Part number: Max. working radius: 1770 mm (69,7 in) A: 750 mm (29,5 in) B: 750 mm (29,5 in)
9 FX2-CHEM-D100-L1200-Up/Down-Low Part number: Max. working radius: 1170 mm (46,1 in) A: 450 mm (17,7 in) B: 450 mm (17,7 in) FX2-CHEM-D100-L1800-Up-Low Part number: Max. working radius: 1770 mm (69,7 in) A: 750 mm (29,5 in) B: 750 mm (29,5 in) FX2-CHEM-D100-L2400-Up-Low Part number: Max. working radius: 2290 mm (90,2 in) A: 1010 mm (39,7 in) B: 1010 mm (39,7 in)
10 FX2-CHEM-D100-L1200-Up-PLUS Part number: Max. working radius: 1170 mm (46,1 in) A: 450 mm (17,7 in) B: 450 mm (17,7 in) FX2-CHEM-D100-L1800-Up-PLUS Part number: Max. working radius: 1770 mm (69,7 in) A: 750 mm (29,5 in) B: 750 mm (29,5 in) FX2-CHEM-D100-L2400-Up-PLUS Part number: Max. working radius: 2290 mm (90,2 in) A: 1010 mm (39,7 in) B: 1010 mm (39,7 in)
11 Wall mounting examples: Left: FX2-Up-PLUS arm with following accessories: -FX2-Wall-P BRKT kit-d50/75/100-l190 -FX2-Ceiling cover plate-plus Middle: FX2-Up-Low arm with following accessories: -FX2-Bracket kit-d50/75/100-l500 -FX2-Ceiling cover plate-plus -FX2-Alu duct-wht -FX2-Duct connector-orig/chem-d100 Right: FX2-Up-Low arm with following accessories: -FX2-Wall BRKT kit-flat-l190-white -FX2-Ceiling cover plate-plus -FX2-Alu duct-wht -FX2-Duct connector-orig/chem-d
12 Bench mounting examples: Left: FX2-Down-Low arm with following accessories: -FX2-Bench bracket kit-d50/75/100 Right: FX2-Down-Through arm
13 Ceiling mounting example: Left: FX2-Up-Low arm with following accessories: -FX-Classic bracket -FX-Cut2fit extension-l1100 -FX2-Alu duct-wht -FX2-Duct connector-orig/chem-d100 -FX-Ceiling cover plate Right: FX2-Up-PLUS arm with following accessories: -FX2-Bracket kit-d50/75/100-l500 -FX2-Ceiling cover plate-plus Other mounting examples: Left: Overbench cabinet mounting with FX2-Up/Down-Through arm Middle: Shelf mounting with FX2-Up-Low arm and following accessories: -FX2-Bench bracket kit
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for applications where small, flexible and easy-touse arms are required. Nederman FX2 arms are made of lightweight anodized aluminium sections, with three adjustable,
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
BenchTop Extraction Arm FX2 100 Original
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
Extraction arm FX100 Original
Bench top extraction systems for all environments. The Nederman bench top systems can be used in every type of environment, from assembly stations, where soldering fumes are extracted, to laboratories,
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
BenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
Bench Top Extraction Arms
Bench Top Extraction Arms The Nederman BenchTop arms can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against
LOCAL EXTRACTION Pure advantages. The ideal extractor for light industry and laboratory environments.
The ideal extractor for light industry and laboratory environments. With its optimal design, Ø 4 inch Movex ME has a very low pressure drop, which provides many valuable benefits. - Low pressure drop saves
Leading the way for clean air in the new millennium. S o u r c e C a p t u r e
Leading the way for clean air in the new millennium. S o u r c e C a p t u r e Market Driven Product Solutions Driven by technological innovations and responsive customer service, Airflow Systems, Inc.
Exhaust rail system 920 for stationary vehicles
Easy to handle systems for all types of workshops. Consists of a basic rail system which is completed with an exhaust extraction kit. Very high extraction efficiency. One extraction unit can serve several
Exhaust rail system 920 for stationary vehicles
Easy to handle systems for all types of workshops. Consists of a basic rail system which is completed with an exhaust extraction kit. Very high extraction efficiency. One extraction unit can serve several
NCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information
Alsident System100 Aluminium (AL) Product Information System 100 Aluminium (AL) General Information Product Specification Product Description System 100 Aluminium Alsident System airflow between 140-400
Mini Arms 4" Diameter
Operation and Maintenance Manual Mini rms 4" Diameter MONOXIVENT - SOURCE CPTURE SYSTEMS - info@ Mini rms Installation of the Monoxivent extractor arm before beginning operation of ceiling, wall, or bench
For installation into ductwork
X X testregistrierung Non-return dampers Type For installation into ductwork Non-return dampers prevent unwanted airflows against the intended airflow direction when the system is not in operation Maximum
FTM-TECHNOLOGIES : 78, rue Raymond Poincaré Nanterre FRANCE Tél Fax:
LOCL EXTRCTOR TERFU local extractor with friction joints for worksites where great flexibility is required. TERFU is a local extractor with friction joints designed for use in workplaces where great flexibility
ALSIDENT SYSTEM 50. A small flexible extraction arm
ALSIDENT SYSTEM 50 A small flexible extraction arm Local Exhaust for a cleaner working environment Installation of individual fume extraction systems at the source of the pollutant during the working process
Extraction arms for every type of application
1 Extraction arms for every type of application 2 Improved workspaces within arm s reach A workspace free from dust, hazardous particles, fumes and exhaust is good in many ways. It improves the working
FilterBox Wall. Automatically or manually cleaned for dust & fume applications.
Automatically or manually cleaned for dust & fume applications. FilterBox Wall can come with or without a attached. The models without a are suitable for installations with an external and contactor, and
NCF 60 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
FilterMax F. Modular dust collector with integrated pre-separator. Models
Technical leaflet 988010 10 1 Date 2009-11-02 FilterMax F Modular dust collector with integrated pre-separator FilterMax F is a complete filter solution for the entire workshop. With it s integrated preseparator
FilterMax F. Modular dust collector with integrated pre-separator
Modular dust collector with integrated pre-separator FilterMax F is a complete filter solution for the entire workshop. With it s integrated preseparator the FilterMax F is ideal for applications with
Inline Fans [ 14 ] * UL is optional and must be specified.
![Inline Fans [ 14 ] * UL is optional and must be specified.](/thumbs/87/95740152.jpg "Inline Fans [ 14 ] * UL is optional and must be specified.")
XTIF, XIB and XID models are listed for electrical (UL/C-UL US 705) File no. E40001. Model XTIF is available with the UL 762 Listing (Power Ventilators for Restaurant Exhaust Appliances). Accurex, LLC
FilterMax F. Modular dust collector with integrated pre-separator
Modular dust collector with integrated pre-separator FilterMax F is a complete filter solution for the entire workshop. With it s integrated preseparator the FilterMax F is ideal for applications with
Tube Axial Inline Fans
Tube Axial Inline Fans Models TDI & TBI-CA Level 3 with Cast Aluminum Propeller Direct & Belt Drive Clean Air or Fume Exhaust July 2011 Features Tube Axial Inline Fans Greenheck s tube axial fans are the
NCF fans 60Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
Soldering/Desoldering. Convection Rework. Fume Extraction. Fluid Dispensing
Soldering/Desoldering Convection Rework Fume Extraction Fluid Dispensing www.beasuperproducer.com BVX-100 Benchtop Single User Arm/Plenum System Portable, single user fume extraction system Low noise unit
Homepage > Products > External louvres - louvre blades > Mechanically self-powered dampers > Non-return dampers > Type KUL.
Homepage > Products > External louvres - louvre blades > Mechanically self-powered dampers > Non-return dampers > Type KUL Type KUL FOR INSTALLATION INTO DUCTWORK Non-return dampers prevent unwanted airflows
FlexPAK 800 DX. The leading extraction solution. Always the right capacity.
The leading extraction solution. Always the right capacity. The FlexPAK DX high vacuum unit represents the foremost solution on the market. The unit is designed for the extraction of welding fumes, grinding
ALSIDENT SYSTEM 75. Easily positioned all-round fume extraction arm
ALSIDENT SYSTEM 75 Easily positioned all-round fume extraction arm Local Exhaust for a cleaner working environment Installation of individual fume extraction systems at the source of the pollutant during
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles, made of aluminium, with fixed horizontal blades also for horizontal runs Single
4m. Extension arm. HVU Arm. ASX ATEX arm. HVU Arm
extension Arms 4m. Extension arm HVU Arm HVU Arm ASX ATEX arm 22 Wing arm WING ARM WING arm The classic point extraction arm. The WING-arm construction is more than 40 years old, but with small improvements
INDEX. Chapter2. air master. Grilles and Registers
Chapter2 INDEX A.Grilles and registers. 1. Supply air grille - front horizontal blades...: ASG-H...2.1 2. Supply air grille - front vertical blades...: ASG-V...2.2 3. Supply air register - front horizontal
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles with flat border construction also for continuous horizontal runs The new ventilation
FilterMax DF. Modular dust multi purpose collector. Models
Modular dust multi purpose collector FilterMax DF is a efficient and compact solution to your dust and fume problems. FilterMax DF handles the air polution from metal industries as well as non explosive
FilterMax DF. Modular dust multi purpose collector. Models
Technical leaflet 988009 10 1 Date 2009-10-26 FilterMax DF Modular dust multi purpose collector FilterMax DF is a efficient and compact solution to your dust and fume problems. FilterMax DF handles the
15000 TT Series Tube Type
Operation and Maintenance Manual 15000 TT Series MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Feb. - 2017 Contents 1. Introduction 2. Application 3. Reservations of Producer 4. Technical Data 5. Structure
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Grille cores made of aluminium, with fixed horizontal blades Grille cores with special profiled blades
CAV controllers. Type VFL. Volume flow limiter for insertion into ducting K
.1 X X testregistrierung CAV controllers Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical
TUBUS TUBUS. Key figures. Function Wall-mounted supply air diffusers
all-mounted supply air diffusers Key figures Connection: Airflow: Pressure: Sound level: Coating: 100,,160, 200, 250, 315 & 00 (mm) 10-350 l/s 70-100 Pa Always below 30 db(a) at 100 Pa, 300 l/s Standard
Fume extractor is warranted for two years, parts and labor.
Industrial Centralized Systems Issued Feb. 7 Index No. AY/. Welding Safety and Health Quick Specs Industrial Applications Manufacturing and fabrication Schools and training centers Processes Stick (SMAW)
Extraction Arms. Capturing fumes at the source
Extraction Arms Capturing fumes at the source Mm-75 Mm-100 EA Ideal for Bench work and Smaller Working Areas The Miniman 75 mm is ideal for all types of smaller dust and fume applications. Totally free
Ceiling swirl diffusers with perforated face plate
X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge Diffuser face plate with perforated circular face style and exposed discharge nozzle Diffuser
CAV controllers. Type VFL. Volume flow limiter for insertion into ducting PD VFL 1
X X testregistrierung CAV controllers Type Aerodynamic damper blade Sticker showing volume flow rates Set the volume flow rate Insert Volume flow limiter for insertion into ducting Circular, mechanical
SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75. Alsident System 100. Chemical Resistant (CR) Product Information SYSTEM 100 CR
Alsident System 100 Chemical Resistant (CR) Product Information System 100 Chemical Resistant (CR) General Information Product Specification Product Description System 100 Chemical Resistant (CR) Alsident
ABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
Tubular Centrifugal Fans
Tubular Centrifugal Fans Model TCB Inline - Horizontal or Vertical Roof Upblast and Roof Supply March 2007 Tubular Centrifugal Fans The TCB series of inline centrifugal fans is designed for ducted inline,
SYSTEM10. Airflow Alarm
ALSIDENT SYSTEM10 Airflow Alarm Securing optimal suction efficiency Easily and quickly installed even without expertise Installed directly on the suction arm Easily operated Fits all suction arms from
Centrifugal Inline Fans Models SQ-M and BSQ-M. Direct and Belt Drive
Centrifugal Inline s Models SQ-M and BSQ-M Direct and Belt Drive July 2010 Centrifugal Inline Duct s Greenheck's model SQ-M and BSQ-M centrifugal square inline fans feature a unique combination of installation
Fume Arms. AQC source capture equipment. Superior technology generating substantial operating savings. No internal adjustment
AQC source capture equipment Fume Arms No internal adjustment Smooth tubes, low static pressure Air volume damper included Self-locking joints 2 grab handles for arm positioning Hood diverter increases
Catalog Swirl diffuser DAL 358
Catalog 1.1.1 Swirl diffuser DAL 358 Concordia University, Montréal, Canada DAL 358 model DAL 358 1 DAL 358 2 Method of operation............................................ DAL 358 3 Flow and direction
we make clean air Air Filtration Solutions Industrial Commercial Residential quatroair.com AIR TECHNOLOGIES INC.
we make clean air Air Filtration Solutions Industrial Commercial Residential Che mic al F ilte r HE PA Filt er Filter Although very effective against very fine particles, filters do not filter out gasses
Roof Upblast and Sidewall Exhaust
XRUB, XRUD, XSEB, XSED, and XRUBS models are listed for electrical (UL/C-UL US 0) File no. E000 and for grease removal (UL/C-UL US ) File no. MH. Accurex, LLC certifies model XRUB, XRUD, XSEB, XSED, and
First Inline fan in the industry to be UL/cUL Listed Power Ventilator for Smoke Control Systems
Medium Pressure Axial Fans Model TBI-FS Levels 3, 4 & 5 with Fabricated Steel Propeller Belt Drive Inline or Roof Mounted Upblast Clean Air or Fume Exhaust High Temperature Process Exhaust Emergency Smoke
ISF-AD. Inclined Floor Swirl Diffuser PRODUCT BROCHURE. Optional Features: Constant throw height adjustable airflow rate Electrical VAV operation
PRODUCT BROCHURE Inclined Floor Swirl Diffuser ISF-AD Optional Features: Constant throw height adjustable airflow rate Electrical VAV operation smartemp.com DESCRIPTION The SMARTEMP Inclined Floor Swirl
Fume Extraction & Dust Collection
1.877.632.4118 mepbrothers.com 725 Century St. Winnipeg, MB. R3H 0M2 Fume Extraction & Dust Collection Shaker Dust Collectors Maxiply Economical pocket type dust collector with manual shaker cleaning (95
Ceiling swirl diffusers with perforated face plate
X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge For horizontal swirling supply air discharge creating high induction levels, with fixed air
COLIBRI Ceiling QUICK FACTS. Square ceiling diffuser with discs for supply air
Square ceiling diffuser with discs for supply air QUICK FACTS Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the Extract air version Designed
Fume Arms. Diversified Air Systems, Inc. Superior technology generating substantial operating savings. No internal adjustment
Diversified Air Systems, Inc. Fume Arms No internal adjustment Smooth tubes, low static pressure Air volume damper included Self-locking joints 2 grab handles for arm positioning Hood diverter increases
EGG CRATE RETURN GRILLE
80 EGG CRATE RETURN GRILLE 80 The 80 Series is available in various mounting styles and features sturdy construction, consisting of a heavy gauge aluminum grid core, optional extruded aluminum borders
2007 /
Product Catalogue Produktkatalog Каталог продукции компании Catalogue des produits Termékkatalógus Catalog de produse Katalog výrobků Catálogo de productos Katalog produktów Catálogo de Produtos Productcatalogus
WALL VENTILATION GRILLES CBP
WALL VENTILATION GRILLES CBP 01.10-01 CBP WALL VENTILATION GRILLES Description Designed for ventilation and air-conditioning installations, where control of air flow and direction of the air is required.
CONTROL DAMPERS. Models 1810 & Model Model Model 1370
CONTROL DAMPERS CONTROL DAMPERS MODELS 1810 & 1820 MANUAL ALANCING DAMPERS STEEL Models 1810 and 1820 have been engineering and designed for manual balancing applications in low to medium pressure and
THE INTELIAIR TM. i2m AND i3m FUME EXTRACTION ARMS KEY FEATURES
THE INTELIAIR TM i2m AND i3m FUME EXTRACTION ARMS THE INTELLIGENT AIR CONTROL SYSTEM The Inteliair I2M and I3M self-supporting fume extraction arms are designed to deliver quality and performance whilst
VAV terminal units. Type TVM. For dual duct systems PD TVM 1
X X testregistrierung VAV terminal units Type Variant -S Rectangular connection on the room end For dual duct systems VAV dual duct terminal units for dual duct systems with variable volume flows in buildings
SYSTEMS FOR VEHICLE TESTING SYSTEMS REV M KIT AND REV A KIT
136 SYSTEMS FOR VEHICLE TESTING SYSTEMS REV M KIT AND REV A KIT Extraction kits for testing centres for cars, light commercial vehicles and heavy vehicles with manual or automatic return system Equipments
INDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
85 db(a) at m³/h. 75 db(a) at 4000 m³/h. 78 db(a) at 3500 m³/h. 69 db(a) at 2500 m³/h. 85 db(a) at m³/h. 74 db(a) at 4000 m³/h
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
XeteX, Inc. All Rights Reserved.
Model XC Indoor or outdoor mounted, simple, in-case aluminum flat plate exchanger with options for frost control. Ideal for inline installations: in duct-work systems, in built-up units, or in modular
PLASTIC BIN SUPPORT RACKS
PLASTIC BIN SUPPORT RACKS Louvered bin panels can be wall-mounted, attached to back of shelving, mounted on benches, carts, inside cabinets, fastened to slotted angle components or used for service truck
CAV controllers. Type RN-Ex. For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) PD RN-Ex 1
X X testregistrierung CAV controllers Type Adjustment scale ATEX-Zertifizierung For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) Circular, mechanical self-powered
TORIN by: AIRDEX Index Page No.
Index Page No. N Series Fans 2 Bladed, Heavy Duty...1 N Series Fans 3 Bladed, Free Air...2-3 N Series Fans 4 Bladed, Heavy Duty...4-5 Universal Hubs...6 One Piece Fan O Series 4 & 5 Bladed...7 One Piece
CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)
X X testregistrierung CAV controllers Type Adjustment scale For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) Rectangular, mechanical self-powered
ABOVE-FLOOR WHEEL LATHE
Delta Manufacturing Address: 3707 19 th Avenue North, Escanaba, MI 49829 Phone: 906-233-1500 Fax: 906-233-1555 www.deltamfg.net 1 st Edition MACHINE OPERATION SPECIFICATIONS: Machine Function Simultaneous
ZEPHYR CABINET. Single & Twin Unit Cabinet Fans. Moving Your Way BULLETIN ZC15 TABLE OF CONTENTS
ZEPHYR CABINET Single & Twin Unit Cabinet Fans Moving Your Way TABLE OF CONTENTS Introduction, Certifications & Listings, Features & Benefits 3 Options & Accessories 4 Typical Applications & Belt Drive
Ball-bearing KUA. A superflexible extractor for small and medium sized work places
Ball-bearing KUA A superflexible extractor for small and medium sized work places Copyright. All rights reserved. PLYMOVENT AB Föreningsgatan 37, SE-211 52 Malmö, Sweden Tel: +46 40 30 31 30, Fax: +46
Shut-off dampers. Type AKK. For contaminated air PD AKK 1
X X testregistrierung Shut-off dampers Type Variant with circular spigot For contaminated air Plastic circular shut-off dampers for shutting off aggressive media volume flows in air conditioning systems
Pneumatic Rail System (PRS)
Exhaust extraction system for emergency stations Pneumatic Rail System PRS, is a fully automatic, high capacity exhaust extraction system for up to 4 emergency vehicles per bay. The system is based on
SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 PP SYSTEM 100 ALSIDENT SYSTEM 75. Chemical Resistant (CR) Product Information
ALSIDENT SYSTEM 75 Chemical Resistant (CR) Product Information System 75 Chemical Resistant (CR) General Information Product Specification Product Description System 75 Chemical Resistant (CR) Alsident
Product manual Extraction arm KUA
Product manual Extraction arm KUA Table of contents: Page: Technical description...2 Delivery...2 Advantages...2 Technical data...2 Components and operation...2 Handling...2 Hood operation...2 Mounting
RPD ROUND PLAQUE DIFFUSER
ROUND PLAQUE DIFFUSER s (RPD) provide a balance between engineering and architectural needs, with a flush appearance and superior VAV performance in both ceiling and exposed duct mounting applications.
Ceiling swirl diffusers
X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Adjustable blades Protective cage For high rooms, with adjustable air control blades Circular ceiling swirl diffusers,
Manual Use and Maintenance ALSIDENT SYSTEM 75
Manual Use and Maintenance ALSIDENT SYSTEM 75 Use and maintenance ALSIDENT SYSTEM 75 System 75 is intended for air volumes between 80 and 180 m 3 /hour and available in the following mounting versions:
LABORATORY FUME HOODS
Fume Hoods Fume Hood Applications Laboratory professionals and students across the country, and all over the world, depend on the safety of our hoods. Your protection is our first concern and the fume
for Pleasant & Healthy Air-Distribution ISO 9001:2000 Linear Bar & Floor Grilles Product Bulletin 135-D
for Pleasant & Healthy Air-Distribution ISO 90012000 Product Bulletin 135-D Linear Bar & Floor Grilles Pleasant.. Serene.. YOU & DASCO... Since 1964 Partners for good health INTRODUCTION DASCO Linear Bar
Ventilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades Ventilation
Affordable portable filtration unit
AQC source capture equipment Affordable portable filtration unit 750 to 800 CFM at the hood High efficiency cartridge Ideal for welding applications MAXAIR 6 X 10 fume arm included Filter pressure status
IrisControlDamper. For Adjustment and Measuring of Airflow.
IrisControlDamper For Adjustment and Measuring of Airflow www.actionair.co.uk sales@actionair.co.uk Iris Control Damper (ICD) Quick, silent and efficient is the simple summary of the features of the Actionair
MODEL TXD DIRECT DRIVE CENTRIFUGAL UPBLAST ROOF EXHAUSTER
MEL TXD Model Features Exhaust air up to 3,400 CFM in high static pressure applications up to 1-1/4 w.g. Attractive spun aluminum exterior Direct drive units have low sound levels and quiet operation Non-overloading
NEW. Iris Control Damper (ICD) For adjustment and measuring of airflow. Features. Quick and simple installation and maintenance
March 29 Iris Control Damper (ICD) NEW Iris Control Damper (ICD) For adjustment and measuring of airflow Features Quick and simple installation and maintenance Extended spigot connections 1% opening capacity
Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.
X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off
VANEAXIAL FANS. DUCT FANS Capacities to 60,000 CFM Static pressures to 2 WG. TUBEAXIAL FANS Capacities to 86,000 CFM Static pressures to 3 WG
BULLETIN 671 AUGUST, 2016 VANEAXIAL FANS DUCT FANS Capacities to 60,000 Static pressures to 2 WG TUBEAXIAL FANS Capacities to 86,000 Static pressures to 3 WG Capacities to 0,000 Static pressures to 5 WG
Centrifugal Cabinet Fans Model BCF. Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile November 204 BCF Centrifugal Cabinet Contents Standard Construction Features... 3 Options and Accessories... 4 Filter and Mixing Box Data... 5 Typical Installations...
Exhaust Extraction Systems for Stationary Vehicles
Exhaust Extraction Systems for Stationary Vehicles The systems presented in this section are used for extracting exhaust from parked vehicles. All solutions offer simple installation and optimal extraction
DRUM LOUVERS DRUM LOUVERS 45DL SERIES. Models: 45DL1 Single Vanes 45DL2 Split Vanes G151 HIGH CAPACITY LONG THROW ALUMINUM CONSTRUCTION
DRUM LOUVERS 45DL SERIES HIH CAPACITY LON THROW ALUMINUM CONSTRUCTION Models: Single Vanes 45DL2 Split Vanes Suffix '-O' adds a steel opposed blade damper Models -O and 45DL2 Model Series 45DL Drum Louvers
Ceiling swirl diffusers
X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Vertical air discharge Protective cage For high rooms, with adjustable air control blades Square ceiling swirl diffusers,
FlowAir CATALOG.
FlowAir CATALOG www.flowairfilters.com FPR Filter 2 The FPR is a Vcells Filter type. Especially designed to remove fine dust, smoke and bacteria. The FPR is suitable for air conditioning installations.