Bench Top Extraction Arms

Transcription

1 Bench Top Extraction Arms The Nederman BenchTop arms can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital. For more information on each product: see following pages. Original Connection direction* Arm Ø, mm Length, mm Down Up/down Down Down Up Up Down Down Up Up Up/down Down Up Up * Note: Different spring mechanisms are fitted depending on connection direction Connection direction* Arm Ø, mm Length, mm FX32 FX50 FX75 FX100 Down Up/down Down Down Up Up Down Down Up Up Up/down Down Up Up ORIGINAL CHEM * Note: Different spring mechanisms are fitted depending on connection direction CHEM Connection direction* Arm Ø, mm Length, mm Down Down Connection down Up Up Up/down Down Up Up Connection up * Note: Different spring mechanisms are fitted depending on connection direction 50

2 Guide to Bench Top Extraction Kits Original Extractor kit Voltage, V / Electrical plug ORIGINAL / EUR / UK / EUR / UK / EUR / UK / EUR / UK / EUR / UK / EUR / UK Extractor kit Voltage, V / Electrical plug / EUR / UK / EUR / UK / EUR / UK / EUR / UK / EUR / UK / EUR / UK Extraction Kit Original 500 Extraction Kit Original 1000 Extraction Kit Original 1500 Extraction Kit Original 2000 Extraction Kit Original 2500 Extraction Kit Original

3 FX Extraction Arm 32 A unique flexible plastic hose, self-supporting without joints, for workplaces with limited space. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. The arm is equipped with a damper close to the swivel Also available in an version, electrically conductive, for electronic applications Capacity, m³/h Arm Ø, mm 32 Arm length, mm 1000 FX Extraction Arm 50 Made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. Equipped with a damper close to the extraction opening Model for bench mounting (connection down) or wall/ceiling mounting (connection up) available. Also available in an version, electrically conductive, for electronic applications Capacity, m³/h Arm Ø, mm 50 Arm length two joints, mm 700 Arm length three joints, mm 1100 and1500 Temperature extracted air, C -10 to +70 Accessories: see end of chapter 52

4 FX Extraction Arm 75 Made of light-weight anodized aluminium sections, with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. Equipped with a damper close to the extraction opening Model for bench mounting (connection down) or wall/ceiling mounting (connection up) available Also available in an version, electrically conductive, for electronic applications Also available in a CHEM version, for chemical applications Capacity, m³/h Arm Ø, mm 75 Arm length three joints, mm 1100 and1500 Temperature extracted air, C -10 to +70 FX Extraction Arm 100 Made of light-weight anodized aluminium sections with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning. Equipped with a damper close to the extraction opening Model for bench mounting (conn. down) or wall/ceiling mounting (conn. up) available. Also available in an version, electrically conductive, for electronic applications Available in a CHEM version, for chemical applications Capacity, m³/h Arm Ø, mm 100 Arm length three joints, mm 1200, 1800 and 2400 Temperature extracted air, C -10 to +70 Accessories: see end of chapter 53

5 Extraction Kit Original 500 Designed for one smaller workplace, where the demand for airflow is up to 30m³/h per arm. The kit consists of an extraction arm FX 32 with table bracket and a CX 5500 filter and fan unit. (For more information see separate product section.) One speed on/off. Complete with hose and extraction hood. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 30 Power, W 80 Arm Ø, mm 32 Arm length, mm 850 Hose Ø, mm 32 Hose length, m 1.5 Weight filter and fan, kg 8.6 Extraction Kit Original 1000 Designed for two smaller workplaces for simultaneous use, where the demand for airflow is up to 42m³/h per arm. The kit consists of two extraction arms FX 32 with table brackets, filter unit and fan N3. (For more information see separate product section.) The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 42 Power, W 170 Arm Ø, mm 32 Arm length, mm 850 Hose Ø, mm 45 Hose length, m 3.0 Weight filter and fan, kg 8.0 Extraction Kit Original 1500 Designed for three smaller workplaces for simultaneous use, where the demand for airflow is up to 38m³/h per arm. The kit consists of three extraction arms FX 32 with table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 38 Power, W 170 Arm Ø, mm 32 Arm length, mm 850 Hose Ø, mm 45 Hose length, m 3.0 Weight filter and fan, kg

6 Extraction Kit Original 2000 Designed for one workplace, where the demand for airflow is up to 100m³/h. The kit consists of a FX 50 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and combination hood. The hood is made of clear plastic, which increases the visibility (not the hood). Also available in an version for the electronics industry. Airflow, m³/h 100 Power, W 170 Arm Ø, mm 50 Arm length, mm 1100 Hose Ø, mm 75 Hose length, m 3.0 Weight filter and fan, kg 8.0 Extraction Kit Original 2500 Designed for two workplaces, where the demand for airflow is up to 75m³/ h per arm. The kit consists of two extraction arms FX 50 with swivel, table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction nozzles. Also available in an version for the electronics industry. Airflow, m³/h 75 Power, W 170 Arm Ø, mm 50 Arm length, mm 1100 Hose Ø, mm 75 Hose length, m 3.0 Weight filter and fan, kg 8.0 Extraction Kit Original 3000 Designed for one workplace, where the demand for airflow is up to 150m³/ h. The kit consists of an extraction arm FX 75 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and extraction nozzle. Also available in an version for the electronics industry. Airflow, m³/h 150 Power, W 170 Arm Ø, mm 75 Arm length, mm 1100 Hose Ø, mm 100 Hose length, m 3.0 Weight filter and fan, kg

7 CX 5500 Filter and Fan Unit The product consists of a filter with an integrated fan delivered with a connection hose. It is designed for extraction and filtration of noxious fumes and vapours from a single work place. For instance when soldering, gluing or working with solvents. It is intended to be used in combination with one FX Extraction Arm 32 or the Down Flow Grille FD 23. The unit is certified as standard. This means that it is electrically conductive for electronic applications. Airflow, m³/h 30 Filtration degree at 0.3 um DOP, % Gas adsorption media, kg 1.35 Voltage, V Power, W 85 Connection Ø, mm 32 Connection hose length, m 1.5 Noise level, db(a) 43 Filter Ø, mm 255 Filter height, mm 400 Weight, kg 8.6 Easy to install The unit is compact and virtually silent The filter consists of particle, HEPA and gas filter The filter cartridges are disposable and easy to change Description Filter unit CX 5500, V,, EUR-plug Filter unit CX 5500, V,, UK-plug Description Filter, particle / gas Filter, micro

8 N3 Fan and Filter Cartridge The product consists of a separate filter cartridge and a N3 fan connected together. It is designed for extraction and filtration of noxious fumes and vapours for the smaller workplace, for instance when soldering, gluing or working with solvents. It is intended to be used in different combinations with the FX arms or the Down Flow Grille FD 23. Easy to install The filter cartridge consists of particle, HEPA and gas filter The filter cartridge is disposable and easy to change Gas only filter available with larger amount of adsorption media, than the standard cartridge It is possible to combine two filters on top of each other with an adapter The speed of the fan is variably controlled by a speed controller, thyristor Together with a silencer box, the unit is certified, which makes it electrically conductive for electronic applications. Filter Fan Assembled unit Airflow, m³/h 300 Filtration degree at 0.3 um DOP, % Particle filter area, m2 2.5 Gas adsorption media, kg 1.3 Voltage, V Phase 1 Power, W 170 Connection Ø, mm 125 Noise level, db(a) 60 Length, mm Width, mm Height, mm Weight, kg Description Fan 0.17KW, with speed control, EUR-plug Fan 0.17KW, with speed control, UK-plug Filter - standard for EK Filter - gas for EK Accessory Silencer/ Box for EK s Adapter for connecting two EK filter cartridges

9 TX 2000 Soldering Filter Compressed air driven filter unit for extraction of soldering fumes. Designed for one or two soldering irons equipped with integrated tip extraction. The unit consists of a filter and a venturi device regulated by a valve. Easy to install The unit is compact and virtually silent The filter consists of particle and gas filter The filter cartridge is disposable and easy to change The unit requires a compressed air supply The airflow is easily set by the reducing valve The unit is certified as standard. This means that it is electrically conductive for electronic applications Airflow, m³/h 30 Filtration degree at 0.3 um DOP, % Particle filter area, m2 0.9 Gas adsorption media, kg 0.85 Compressed air consumtion approx., l/min Working pressure, bar 3-8 Connection Ø, mm 4-6 Noise level, db(a) 42 Filter Ø, mm 210 Filter height, mm 280 Weight, kg 1.8 Description Filter unit TX Description Clip-on kit micro, Clip-on kit universal, Kit for connecting two soldering irons Filter cartridge for TX 2000,

10 Down Flow Grille FD 23 An extraction device designed to be integrated directly in the bench top surface. It is highly effective in capturing the heavy fumes from gluing, solvents and similar. Typical workplaces are schools, laboratories, electronic and medical industries. Recommended to use together with fan/filter CX 5500, or fan N3 with filter. Made of stainless steel which resists many common chemical substances. Can easily be used in combination with an extraction hood for increased extraction capacity. Grille Ø 260 mm. Connection Ø 45 mm. Does not interfere with other equipment in your workplace Easy to dismantle for internal cleaning Perforated suction area with pre filter Virtually silent when connected to a CX 5500 Description Down Flow Grille FD Accessory Reduction 45/32 mm

11 Accessories for Bench Top Extraction Extraction Arms x 2 6 Original Description Fits FX Arm Size, mm 1 Table bracket Wall bracket Bracket complete 50 / 75 / 100 L= Bracket 50 / 75 / Extension profile 50 / 75 / 100 L= Table bracket 50 / 75 / Cover ring, ceiling 50 / 75 Ø 130, T= Description Fits FX Arm Size, mm 1 Table bracket Wall bracket Bracket complete 50 / 75 / 100 L= Bracket 50 / 75 / Extension profile 50 / 75 / 100 L= Table bracket 50 / 75 / Cover ring, ceiling 50 / 75 Ø 130, T= CHEM Description Fits FX Arm Size, mm 3 Bracket complete 50 / 75 / 100 L= Bracket 50 / 75 / Extension profile 50 / 75 / 100 L= Table bracket 50 / 75 / Cover ring, ceiling 50 / 75 Ø 130, T=

12 Hoods Reducers Original Fits FX Arm Size, mm 1 Flange hood x Dome hood 1/ x Dome hood 1/1 32 Ø Metal hood 50 / 75 / 100 Ø Combination hood 50 / 75 / x Fits FX Arm Size, mm 2 Dome hood 1/ x Dome hood 1/1 32 Ø Metal hood 50 / 75 / 100 Ø Combination hood 50 / 75 / x Original Fits FX Arm Ø, mm 1 50 / 75 / / 75 / / 75 / / 75 / Fits FX Arm Ø, mm Part No / 75 / / 75 / / 75 / / 75 / CHEM Fits FX Arm Size, mm 4 Metal hood 50 / 75 / 100 Ø Combination hood 50 / 75 / x CHEM Fits FX Arm Ø, mm 1 50 / 75 / / 75 / / 75 / / 75 / Hoses Original Description Ø, mm Length, mm Hose (black) Hose (white) Hose (grey) Hose (grey) Hose (grey) Description Ø, mm Length, mm Hose (black) Hose (black) Hose (black) Hose (black)