INDUSTRY COMBO MF. Combined filter modules for fumes and particulate, combined composition of multiple modules to increase filtering capacity

Size: px

Start display at page:

Download "INDUSTRY COMBO MF. Combined filter modules for fumes and particulate, combined composition of multiple modules to increase filtering capacity"

Chastity Tate
5 years ago
Views:

INDUSTRY Technical data sheet FILTER MODULES COMBO MF Combined filter modules for fumes and particulate, combined composition of multiple modules to increase filtering capacity APPLICATIONS The COMBO

1 INDUSTRY Technical data sheet FILTER MODULES COMBO MF Combined filter modules for fumes and particulate, combined composition of multiple modules to increase filtering capacity APPLICATIONS The COMBO MF combined modules were designed and manufactured to be inserted as filter systems in centralised fume gas extraction systems in industrial contexts. Given the high efficiency of the filters installed in the different modules, these may also be expanded for use with other types of fumes; depending on the composition, they are recommended for the filtration of welding fumes (even oily), for the treatment of air in civil facilities, for the reduction of solvents in low concentrations, as well as odour removal processes. Considering the reduced size, the filters can be installed in places with limited availability of space. Furthermore, the smaller versions can be equipped with wall-mounted applications which help to optimise the useful spaces of the work area. FEATURES The filter modules can be coupled to create filter / deodorisation units which can be used in many applications. In fact, a combination electrostatic and activated carbon filtration can be created or a combination with mechanical filtration with rigid pocket filters and activated carbon. These filter units may also be acquired with different separate modules. This is because a special connection kit is available which permits several modules to be connected to each other. Furthermore, it is possible for the smaller sizes to have a wall-mounted support by means of special brackets. It is important to note that this type of filter is useful in situations where various processes create gases or odours which must first be eliminated before entering the environment; with this extremely compact system, the filtration of both micro-particulate as well as gases and/or odours is performed by just one filter. CERTIFICATIONS 58

2 TECHNICAL DATA The performance data was measured using the appropriate instruments in our laboratories. N.B. The combined filter flow rate (namely the combination of two filter modules) has been established taking into consideration just one module with a smaller maximum flow rate. This way, efficiency and durability over time is ensured in the other filter section. MOD. FLOW RATE HEAD LOSS MODULO 1 MODULO 2 m³/h Pa MOD. MF (Electrostatic filtration) 50 EC min. 250 max E EC min. 250 max E EC min. 250 max E EC min. 250 max E EC min. 250 max E EC min. 250 max E 200 MOD. MF C (Activated carbon filtration) m³/h Pa MOD. MF (Mechanical filtration) MOD. MF C (Activated carbon filtration) 50 TC T TC T TC T TC T TC T TC T 200 DIMENSIONS The performance data was measured using the appropriate instruments in our laboratories. N.B. The combined filter flow rate (namely the combination of two filter modules) has been established taking into consideration just one module with a smaller maximum flow rate. This way, efficiency and durability over time is ensured in the other filter section. DESCRIPTION UNIT OF MEASUREMENT LxHxP mm 50 EC 700x700x EC 700x1040x EC 700x1400x EC 700x1740x EC 1400x1040x EC 1400x1400x TC 700x700x TC 700x1040x TC 700x1400x TC 700x1740x TC 1400x1040x TC 1400x1400x

3 ACCESSORIES DIFFERENTIAL PRESSURE GAUGE Differential pressure meter with instant analogue display of the measured value. N.B. This accessory serves to provide complete and immediate control on the state of the filters WALL-MOUNTED SHELF Wall bracket kit consisting of galvanised steel and guides for fixing to the filter module. Wall-mounted installation is only possible for smaller modules to facilitate their installation and eliminate any risks related to heavier wall-mounted modules. KIT for MF 50 (E - T - C) KIT for MF 50 (EC - TC) KIT for MF 70 (E - T - C) PLENUM FOR ARM AIR EXTRACTION Powder coated and welded steel adapter for connecting MF 50 filter module to IBS - IBSA - IBF series extractor arm. N.B. This accessory serves to create a wall-mounted module which can provide mechanical or electrostatic filtration by means of modules MF 50 T and MF 50 E ROUNDED SQUARE FITTING Hopper in galvanised steel to be secured to the filter module by means of connection to the rigid hose in extraction and expulsion. Two fittings are required in order for installation to be carried out correctly. REGULATING DAMPER Circular butterfly damper with graduated control in galvanised sheet metal to provide greater control on the air flow rate and speed, as well as for adjusting extraction fan performance ensuring it operates within its standard parameters. QR CODE 60

4 INDUSTRY Technical data sheet FILTER MODULES MF-C Purification system modules with activated carbon filters APPLICATIONS The MF-C activated carbon filter modules were designed and manufactured to be inserted as filter systems in centralised fume gas extraction systems in industrial contexts. Given the high efficiency of the filters installed in the different modules, these may also be expanded for use with other types of fumes; depending on the composition, they are recommended for the filtration of welding fumes (even oily), for the treatment of air in civil facilities, for the reduction of solvents in low concentrations, as well as odour removal processes. Considering the reduced size, the filters can be installed in places with limited availability of space. Furthermore, the smaller versions can be equipped with wall-mounted applications which help to optimise the useful spaces of the work area. FEATURES The activated carbon filter module has a load bearing containment structure, formed by extruded aluminium profiles. These support the double-wall panels, pre-painted in grey RAL 7032, galvanised inward facing sides, interposed with 25 mm of polyurethane foam. The filters, fitted to a guide, are housed inside. The filter consists of activated carbon plant, extruded in small cylinders which inserted through vibration in the containment cartridge Ø 160 mm L 400 mm. The individual cartridges weighing approx. 3 Kg each are introduced into units on designated holed plates and can be easily interchanged after saturation. CERTIFICATIONS 61

5 TECHNICAL DATA MOD. MF-C FLOW RATE HEAD LOSS CARTRIDGES USED CARTRIDGES USED mc/h Pa N Ø mm x L mm min. 200 max x min. 200 max x min. 200 max x min. 200 max x min. 200 max x min. 200 max x 400 MOD. 50 C 70 C 100 C 120 C 150 C 200C FILTER THICKNESS Pre-filtro Metallico 287x592x10 Metallic prefilter 592x592x10 Activated carbon filters 305x610x400 Activated carbon filters 610x610x400 Post-filtro metallico 287x592x10 Metallic post-fil ter592x592x10 EFFICIENCY PENETRATIO N No 1 No 1 2 No 10 mm G2 25% 10 P μm mm G2 25% 10 P μm No 1 No 1 2 No 400 x Ø 160 mm x Ø 160 mm No 1 No 1 2 No 10 mm G2 25% 10 P μm mm G2 25% 10 P μm 3,1 Kg 3,1 Kg DIMENSIONS Upon request, modules can be supplied with cartridges Ø 140 mm with activated carbon for specific applications. * The IN/OUT diameters are recommended and available in the optional input and output hoppers. MOD. MF-C DIMENSIONS Ø IN/OUT* WEIGHT OF SINGLE MODULE CARBON FILTER LxHxP mm mm Kg Kg x700x x1040x x1400x x1740x x1040x x1400x TOTAL WEIGHT 62

6 ACCESSORIES DIFFERENTIAL PRESSURE GAUGE Differential pressure meter with instant analogue display of the measured value. N.B. This accessory serves to provide complete and immediate control on the state of the filters WALL-MOUNTED SHELF Wall bracket kit consisting of galvanised steel and guides for fixing to the filter module. Wall-mounted installation is only possible for smaller modules to facilitate their installation and eliminate any risks related to heavier wall-mounted modules. KIT for MF 50 (E - T - C) KIT for MF 50 (EC - TC) KIT for MF 70 (E - T - C) PLENUM FOR ARM AIR EXTRACTION Powder coated and welded steel adapter for connecting MF 50 filter module to IBS - IBSA - IBF series extractor arm. N.B. This accessory serves to create a wall-mounted module which can provide mechanical or electrostatic filtration by means of modules MF 50 T and MF 50 E ROUNDED SQUARE FITTING Hopper in galvanised steel to be secured to the filter module by means of connection to the rigid hose in extraction and expulsion. Two fittings are required in order for installation to be carried out correctly. REGULATING DAMPER Circular butterfly damper with graduated control in galvanised sheet metal to provide greater control on the air flow rate and speed, as well as for adjusting extraction fan performance ensuring it operates within its standard parameters. QR CODE 63

7 INDUSTRY Technical data sheet FILTER MODULES MF-E Purification system modules with electrostatic filters APPLICATIONS The MF-E electrostatic filter modules were designed and manufactured to be inserted as filter systems in centralised fume gas extraction systems in industrial contexts. Given the high efficiency of the filters installed in the different modules, these may also be expanded for use with other types of fumes; depending on the composition, they are recommended for the filtration of welding fumes (even oily), for the treatment of air in civil facilities, for the reduction of solvents in low concentrations, as well as odour removal processes. Considering the reduced size, the filters can be installed in places with limited availability of space. Furthermore, the smaller versions can be equipped with wall-mounted applications which help to optimise the useful spaces of the work area. FEATURES The activated carbon filter module has a load bearing containment structure, formed by extruded aluminium profiles. These support the double-wall panels, pre-painted in grey RAL 7032, galvanised inward facing sides, interposed with 25 mm polyurethane foam to ensure a perfect water-tight seal of the module. The filters, fitted to a guide, are housed inside; 2 pre-filters (one metal anti-intrusion spark trap, one class EU4-G4 pleated polyester filter. The filter consists of an electrostatic cell with a patented system providing an A UNI filter class, comparable to class H12 UNI 1822 which provides constant efficiency up to a load of 600 g of fine particulates. CERTIFICATIONS 64

8 TECHNICAL DATA MOD. MF-E FLOW RATE HEAD LOSS FILTER CLASS EFFICIENCY ILH ELECTRICAL POWER m³/h Pa Class MAX. - MIN. % Volt A - D 99,60-93, A - D 99,60-93, A - D 99,60-93, A - D 99,60-93, A - D 99,60-93, A - D 99,60-93, MOD. 50 E 70 E 100 E 120 E 150 E 200 E FILTER THICKNESS Metallic prefilter 287x592x22 Metallic prefilter 592x592x22 Pre-filtro Pieghettato 287x592x98 Pleated Prefilter 592x592x98 Filtro Elettrostatico 287x592x218 Electrostatic filter 592x592x218 EFFICIENCY PENETRATIO N No 1 No 1 2 No 22 mm G2 25% 10 P μm mm G2 25% 10 P μm No 1 No 1 2 No 98 mm EU4 - G4 70% 10 P > 3 μm mm EU4 - G4 70% 10 P > 3 μm No 1 No 1 2 No 218 mm H12* 99,97% 1 P > 0,3 μm mm H12* 99,97% 1 P > 0,3 μm DIMENSIONS The IN/OUT diameters are recommended and available in the optional input and output hoppers. MOD. MF DIMENSIONS Ø IN/OUT* TOTAL WEIGHT LxHxP mm mm Kg 50 T 700x700x T 700x1040x T 700x1400x T 700x1740x T 1400x1040x T 1400x1400x TH 700x700x TH 700x1040x TH 700x1400x TH 700x1740x TH 1400x1040x TH 1400x1400x

9 ACCESSORIES DIFFERENTIAL PRESSURE GAUGE Differential pressure meter with instant analogue display of the measured value. N.B. This accessory serves to provide complete and immediate control on the state of the filters WALL-MOUNTED SHELF Wall bracket kit consisting of galvanised steel and guides for fixing to the filter module. Wall-mounted installation is only possible for smaller modules to facilitate their installation and eliminate any risks related to heavier wall-mounted modules. KIT for MF 50 (E - T - C) KIT for MF 50 (EC - TC) KIT for MF 70 (E - T - C) PLENUM FOR ARM AIR EXTRACTION Powder coated and welded steel adapter for connecting MF 50 filter module to IBS - IBSA - IBF series extractor arm. N.B. This accessory serves to create a wall-mounted module which can provide mechanical or electrostatic filtration by means of modules MF 50 T and MF 50 E ROUNDED SQUARE FITTING Hopper in galvanised steel to be secured to the filter module by means of connection to the rigid hose in extraction and expulsion. Two fittings are required in order for installation to be carried out correctly. REGULATING DAMPER Circular butterfly damper with graduated control in galvanised sheet metal to provide greater control on the air flow rate and speed, as well as for adjusting extraction fan performance ensuring it operates within its standard parameters. QR CODE 66

10 INDUSTRY Technical data sheet FILTER MODULES MFT-TH Purification system modules with rigid pocket filters APPLICATIONS The MFT-H mechanical filter modules with rigid pocket filters were designed and manufactured to be inserted as filter systems in centralised fume gas extraction systems in industrial contexts. Given the high efficiency of the filters installed in the different modules, these may also be expanded for use with other types of fumes; depending on the composition, they are recommended for the filtration of welding fumes (even oily), for the treatment of air in civil facilities, for the reduction of solvents in low concentrations, as well as odour removal processes. Considering the reduced size, the filters can be installed in places with limited availability of space. Furthermore, the smaller versions can be equipped with wall-mounted applications which help to optimise the useful spaces of the work area. FEATURES The activated carbon filter module has a load bearing containment structure, formed by extruded aluminium profiles. These support the double-wall panels, pre-painted in grey RAL 7032, galvanised inward facing sides, interposed with 25 mm polyurethane foam to ensure a perfect water-tight seal of the module. The filters, fitted to a guide, are housed inside. The MF TH version for laboratories and environments with air-quality management, has the same technical and manufacturing features as the standard version, apart from the filter section for the insertion of a HEPA pocket filter (completely incinerable) with filter class H12, certified according to EN CERTIFICATIONS 67

11 TECHNICAL DATA MOD. MF FLOW RATE HEAD LOSS FILTER CLASS EFFICIENCY ILH FILTER SURFACES m³/h Pa Class % m² 50 T F8 95% T F8 95% 25,5 100 T F8 95% T F8 95% 42,5 150 T F8 95% T F8 95% TH H12 99,97% TH H12 99,97% 25,5 100 TH H12 99,97% TH H12 99,97% 42,5 150 TH H12 99,97% TH H12 99,97% 68 MOD. 50 T 70 T 100 T 120 T 150 T 200 T FILTER THICKNESS Metallic prefilter 287x592x22 Metallic prefilter 592x592x22 Pleated Prefilter 287x592x98 Pleated Prefilter 592x592x98 Pocket filter 287x592x292 Pocket filter 592x592x292 EFFICIENCY PENETRATIO N No 1 No 1 2 No 22 mm G2 25% 10 P μm mm G2 25% 10 P μm No 1 No 1 2 No 98 mm EU4 - G4 70% 10 P > 3 μm mm EU4 - G4 70% 10 P > 3 μm No 1 No 1 2 No 292 mm F8 95% 1 P > 0,3 μm mm F8 95% 1 P > 0,3 μm DIMENSIONS The IN/OUT diameters are recommended and available in the optional input and output hoppers. MOD. MF-E DIMENSIONS Ø IN/OUT* TOTAL WEIGHT LxHxP mm mm Kg x700x x1040x x1400x x1740x x1040x x1400x

12 ACCESSORIES DIFFERENTIAL PRESSURE GAUGE Differential pressure meter with instant analogue display of the measured value. N.B. This accessory serves to provide complete and immediate control on the state of the filters WALL-MOUNTED SHELF Wall bracket kit consisting of galvanised steel and guides for fixing to the filter module. Wall-mounted installation is only possible for smaller modules to facilitate their installation and eliminate any risks related to heavier wall-mounted modules. KIT for MF 50 (E - T - C) KIT for MF 50 (EC - TC) KIT for MF 70 (E - T - C) PLENUM FOR ARM AIR EXTRACTION Powder coated and welded steel adapter for connecting MF 50 filter module to IBS - IBSA - IBF series extractor arm. N.B. This accessory serves to create a wall-mounted module which can provide mechanical or electrostatic filtration by means of modules MF 50 T and MF 50 E ROUNDED SQUARE FITTING Hopper in galvanised steel to be secured to the filter module by means of connection to the rigid hose in extraction and expulsion. Two fittings are required in order for installation to be carried out correctly. REGULATING DAMPER Circular butterfly damper with graduated control in galvanised sheet metal to provide greater control on the air flow rate and speed, as well as for adjusting extraction fan performance ensuring it operates within its standard parameters. QR CODE 69

FILTER MODULES FILTER MODULES APPLICATIONS

FILTER MODULES FILTER MODULES APPLICATIONS MF MF filter modules were developed for use as filtration systems in centralised systems or individual work stations for the extraction of welding fumes. They