ASALAIR FUME CUPBOARD /R WITH HEPA FILTER

Transcription

1 ASAL S.R.L. - APPARECCHI SCIENTIFICI ATTREZZATURE LABORATORI Quality System comply with requirements of UNI EN ISO 9001:2008. Certificate TÜV Italia n Rev. 04 ASALAIR FUME CUPBOARD /R WITH HEPA FILTER COD Ed. 05/18 Page 1 of 10

2 Model 701/R Equipped as standard with air conveyor Ø 150 mm. with anti-wind air grating, for the exhaust outside of filtered air that the customer is REQUIRED to install. Approvals: UNI EN :2003 Fume cupboard + CEI EN :2001 Electric safety requirements. EN :2006 electro-magnetic compatibility. This equipment has been designed, built and tested following the European Directive 2006/95/CE (BT low tension), CEI EN :2001 e UNI EN :2003 fume cupboards certificate n Z and directives EMC (Electro-magnetic directive 2004/108/CE) EN :2006, certificate n Z with omologation by TUV SUD Ed. 05/18 Page 2 of 10

3 Model 701 This model does not require any air conveyor CEI EN :2001 Electric safety requirements. EN :2006 electro-magnetic compatibility This equipment has been designed, built and tested following the European Directive 2006/95/CE (BT low tension), CEI EN :2001 certificate n Z and directives EMC (Electro-magnetic directive 2004/108/CE) EN :2006, certificate n Z with omologation by TUV SUD Ed. 05/18 Page 3 of 10

4 DESCRIPTION Fume cupboard model 701, with hepa filter is a bench suction hood. Equipped with absolute Hepa filter (High efficiency particulate air) tested M.P.P.S in accordance with C.E.N with global efficiency % class H14, suitable for all operations, to do under the hood, that include powders handling. It s assure an excellent protection both of the operator and the environment. It isn t suitable like protection for the products manipulated into it from the external contamination. It can be advantageously used in all cases it is not necessary or a priority to protect this product from the air in the laboratory (eg opening of biological samples for analysis, weighing, sifting, and crushing or as protection for centrifuges or other equipment at risk of aerosols, etc.). Casing realised in powdered painted steel acids resistant, RAL It can be installed over any bench. Its working surface consists of a removable tray in stainless steel Aisi 316L 2B glazed which allows the hood location also over tanks or sinks. The model certified in accordance with UNI EN :2003 model 701/R is equipped as standard with air conveyor Ø 150 mm. with anti-wind air grating, for the exhaust outside of filtered air, that the customer is REQUIRED to install. The model certified in accordance with only EN :2001 model 701 does not require any air conveyor. TECHNICAL SPECIFICATIONS Work dimensions WxDxH: 696 x 637 x 770 mm. Removable work benchtop in stainless steel Aisi 304 glazed dimensions WxDxH: 696 x 637 x 20 mm. Removable work benchtop capacity 9 litres. Overall dimensions WxDxH: 800 x 670 x 1150 mm. Overall dimensions with air conveyor Ø 150 mm WxDxH: 800 x 670 x 1320 mm. Front panel openings: 200 mm - with front panel lowered in working position 480 mm - with front panel totally open Filtered air volume: 320 m 3 /h Air average speed: 0.50 mt / sec. Inner volume: 0.34 m 3 Absolute Hepa filter (High efficiency particulate air) tested M.P.P.S in accordance with C.E.N with global efficiency % class H14. Prefilter in synthetic material class G4 (90% efficiency) in accordance with EN 779 On the right side of the hood attack with hose union to be grafted, for execution of the hepa filter efficiency DOP test. Weight: Kg. 55 Noise 60 Db (A) Hood sides panels, thickness 3 mm, and front panel, thickness 5 mm, are in Perspex acrylic slab casting transparent resistant at UV rays. Polycarbonate membrane control panel. Filter working hours visualisation, max 9999 hours. Accessory on request: closing panel with Germicide lamp 15 Watt Germicide lamp working hours visualisation, max 9999 hours. Germicide lamp timer hours visualisation, max 99 hours and 59 minutes. Acoustic warning signal (3 beeps) at the end of countdown. In the event of power failure, when using the UV germicide lamp: when the voltage is returned, the UV germicidal lamp control flashes, the display flashes and indicates the time remaining before the interruption. Press the UV germicide lamp command to reactivate the countdown. During the use of UV germicide lamp (15 W), other functions are disabled. Lighting lamp switch Service outlet switch Ed. 05/18 Page 4 of 10

5 ELECTRICAL SPECIFICATIONS Power supply: 230 V - 50 Hz. Electrical input: 110 W W Overload fuses: 2 x 3 AF (5 x 20) mm. Outlet switch with overload fuse: 1 x 2 AF (5 x 20) mm. Connection outlet: 10 A Low background noise electric fan that meet the requirements of the directives EN , EN 50178, EN 60950, approvals by VDE, CE, UL. Possibility to regulate airflow. Lighting by led lamp 9 W 900 Lux, outside the work area Germicide UV lamp 15W SAFETY: all the electrical components, switches and wirings are kept in the controls panel, separated from the airflow in order to avoid inconveniences if inflammable materials are handled inside the hood. CONTROL PANEL FIG outlet control switch 2 emergency control maximum fan speed 3 lighting switch 4 low fan speed 5 fan switch 6 maximum speed fan 7 filter-outlet service time display switching 8 time display 9 filter working hours visualization, max 9999 hours. 10 outlet service timer hours visualization, max 99 hours and 59 minutes. 11 outlet service working hours visualization, max 9999 hours. Ed. 05/18 Page 5 of 10

6 ACCESSORIES Air conveyor connector Ø mm. 150 with anti-wind air grating. In the cupboard certified UNI EN 14175, the air conveyor is supplied as standard. De-mountable fixed or wheeled support for installing hood, made in powdered painted steel with bilaminated face. Overall dimensions WxDxH: 750x750x830 (860 with wheels) mm. Four wheels kit for support Drawers set with three draws and wheels WxDxH 410x500x570 mm. to fit under the support. Front opening panel in stainless steel Front opening panel in stainless steel with germicide UV 15 W lamp and safety switch. To switch on the germicide lamp: put the panel in stainless steel over the frontal opening, close with the knobs and connect the cable in the external outlet Ed. 05/18 Page 6 of 10

7 Supplementary electrical socket (Schuko type or Italian) n 3 places OTHER FILTERS BY REQUEST: Activated carbon filter to insert between hepa filter and air exit Activated carbon filter for special application: Iodine, Mercury, Formaldehyde, Ammonia. Ed. 05/18 Page 7 of 10

8 Ed. 05/18 Page 8 of 10

9 Ed. 05/18 Page 9 of 10

10 Ed. 05/18 Page 10 of 10