Products, systems and solutions for improved workplaces 2009/2010

Transcription

1 Products, systems and solutions for improved workplaces 2009/2010

2

3 Bringing good conditions to workplaces and the environment For more than 60 years Nederman has developed products and solutions to reduce the strain on the environment and protect people from harmful particles, fibres, dust, gas, smoke and oil mist. Many of our products and systems have been groundbreaking in industries like metal fabrication, automotive services, composite manufacturing, food, chemical and pharmaceutical and many others. Today companies all over the world are using equipment from Nederman. Nederman solutions pay off in many ways A clean and safe working environment Less stress on the environment Improved quality of the finished product Improved production uptime More effective production Improved energy utilisation Coolant handling Coolant filtration/purification Oil/water, tramp-oil, particles, and bacteria separation Distribution/handling of different media Reels for air, water, electricity, gases, exhaust fumes etc Oil, grease and waste oil handling Extraction and filtration Dust and particles Welding fumes Exhaust fumes Solvents Gases and odours Explosive substances Oil mist Extraction from sanding/grinding tools and welding torches On-tool extraction of dust and particles On-torch extraction of welding fumes Industrial cleaning/collection Swarf and scale rags Glass Rust Sand Water/mud Oil sludge Metal chips Oil stripping and tank cleaning Collection of flammable liquids Collection and transportation of mud, sludge, waste oil etc Swarf handling and processing Transportation/conveying Chip crushing Briquetting 3

4 Welcome to Nederman! We are pleased to present the 2009/2010 edition of the Nederman catalogue with our standard product programme. We hope the catalogue will be an inspiring guide to improved workspaces. World-wide local support through Nederman partners Nederman is present on all continents via subsidiaries or agents. This close international network and the ability to communicate directly to our customers gives us a profound knowledge of the different needs on many different markets. This massive input is also an important source for our development of new, innovative products and solutions. Customer and Technical Support Centre The Nederman network of representatives offers a comprehensive range of customer support on local markets. They are backed up by the Nederman Central Customer Service Group assisting in project handling etc. Nederman Design & Engineering Guide The Nederman Design and Engineering Guide is a practical handbook for planning and designing dust and fume and extraction systems. The guide provides facts and hints, overviews of typical applications and design parameters. The overview is followed by detailed product information and specifications. Can be ordered on our website. The Nederman websites give you information about the company and our products and systems etc. 4

5 Introduction and applications...6 Vehicle Exhaust Extraction Systems For stationary vehicles...17 Singe/Twin Exhaust Extractor...18 Exhaust Hose Reels...19 Exhaust Rail System...22 Balancer and Emission kits...23 Trackarm System...24 Exhaust Nozzles...25 Exhaust Hoses...27 Accessories...28 Low Vacuum Products and Systems Bench Top Extraction Systems Selection Guide...29 Bench Top Extraction Kits...30 Extraction Arms and Accessories...31 Fan and Filter Units...33 Extraction Arms Selection Guide...34 Extraction Arms, non explosive environment...35 Extension Arm/Rail...42 Extraction Arms vehicle repair shops...44 Extraction Arms, explosive environment...46 Extraction Arm Accessories...47 Fans General information Fans...48 N-series Fans...49 Portable Fans...50 Control equipment...51 Accessories...54 Filters and Filter Systems General information Filter Systems...55 Portable Fume Eliminator...57 Modular Filter Systems - MFS...58 Mobile Filter Systems...60 Modular Extraction/Filter Systems...62 NOM Oil Mist Filter Systems...64 High Vacuum Products and Systems Central High Vacuum Systems for grinding, sanding, welding and cleaning General Information...65 L-PAK High Vacuum / Filter Unit...66 Pre-separator...67 Grinding, Sanding, Welding On-tool Extraction Kits...68 Extraction Nozzles...69 Vacuum Cleaning Sets...70 Industrial Extraction Hoses...71 Mobile High Vacuum Cleaning Units Selection Guide...72 Electric Powered...73 Air Powered...74 Air Powered EX approved...75 Mobile Sand Blaster Unit Nederman Suction Blaster...77 Reels Air, Water, Oil, Grease, Gas and Electricity Reels Air, Water, Oil, Grease, Gas & Electricity Selection Guides...78 Hose Reels for air, water, oil, grease...80 Anti-corrosion and stainless steel hose reels...87 EX-approved hose reels...92 Vacuum Hose Reels...93 Cable Reels...94 Accessories...98 Ergonomics and Protection Balancers Workplace Screening...101

6 Total systems total responsibility Nederman not only markets a wide range of products but also total system solutions for a wide range of applications and industries. Our services comprise everything from design and planning to installation, service, and maintenance. We have a profound technical competence and an extensive bank of application references with thousands upon thousands of installations all over the world. Our sales organisation is also well acquainted with international and local environmental restrictions and health-related legislation. For more information please contact your local Nederman sales representative. Nederman offers complete solutions PRE-STUDIES PLANNING SYSTEM DESIGN INSTALLATION COMMISSIONING TRAINING MAINTENANCE Proprietary products based on effective technology Comprehensive product range Extensive experience of creating optimum working environment. Worldwide representation 6

7 Solutions for explosive environments Explosive risks occur where process dust comprises fine aluminium dust, organic powders or other similar substances. We know the requirements in these explosive environments and we have a wide experience of providing suitable solutions to help you safeguard your plant. Central vacuum and filter systems Nederman offers: Products and systems designed to comply with the ATEX directives Design consultancy services Installation After sales customer support FilterMax DX filters are designed according to the ATEX directive. This system is equipped with a backlash valve. EX products in this catalogue Reels Bench Top Extraction Arms NCF DX explosion proof fans for Filter- Max DX are approved for conductive dust in zone 22 in accordance with ATEX directive 94/9 group 2, category 3. Extraction Arms Mobile Vacuum Cleaners For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and 7

8 The unbroken chain At Nederman we control the complete product chain We develop, design, manufacture and test our products and can also offer installation, emergency service/repair, scheduled maintenance and other services. This means that you are always ensured safe and reliable products and your feedback will help us to design even more effective solutions. Leading design solutions Our extensive product range is based on intensive product development and state-of-the-art design solutions with focus on user-friendliness and durability. Our modular design concept enables us to offer flexible and cost-effective products. Production and logistics Effective production and logistics are one of Nederman s success factors and we constantly work to make our products and systems easy avalaible on all continents. Our assembly facilities are located in Sweden, Norway and North America/ Canada. We also have a new opened assembly and logistics centre in Shanghai covering the markets in Asia, Australia and New Zealand. Leading quality With more than 60 years of experience we are pioneers renowned for excellent quality, certified according to ISO 9001 and ISO

9 Preventative Maintenance and Services Nederman Service Maximizing equipment uptime and reducing the risk of costly expenses With a Nederman Service and Maintenance Contract you never have to worry about costly downtime or production delays. We make sure your equipment is always at its best, safeguarding performance, safety and environment. Inspections, maintenance and repair can be done when, where and how you need them. Our service contract is completely adapted to your needs. Regular, scheduled check-ups or demanding emergency situations our job is to make sure your equipment is doing its job. You choose the service intervals and level of service you want, along with the type of repairs and/or inspections for any number of units. Nederman Service contract: Longer equipment life Safeguards health and safety Enhances operator efficiency Prevents costly downtime Cuts maintenance costs Guarantees professional maintenance To safeguard the supply of spare parts at the right time, Nederman stocks a vast number of critical spare parts and wearing parts for immediate delivery. Nederman Services & Support Scheduled maintenance and inspection Emergency service Original Spare Parts For more information please contact your local Nederman sales representative. Our global network of skilled Service Technicians provide local on-site support. Service programs, including preventative maintenance, can be tailor-made to your specific set-up of Nederman equipment. 9

10 Metalworking/welding Welding generates extremely small metal particulates which are very dangerous to inhale. Therefore, many countries have stipulated a maximum permissible exposure to welding fumes. The best way to control the exposure is to capture the fumes right at the source. This protects both the welder and the other workers. Nederman systems cover both high and low vaccum techniques and are used for extraction of welding fumes and for cleaning operations of premises and machines. Nederman systems and solutions: Welding fume extraction and filtering On-torch welding fume extraction General cleaning/collection of scale rags etc Workplace protection with curtains and screens Modular filter system Industrial cleaning system Workplace curtains On-torch extraction High vacuum/ filter system Welding fume extraction arms Mobile fume extraction unit Extraction arm on rail Mobile vacuum cleaners Low vacuum/ filter system All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and Quick find: Extraction arms Portable fume eliminator Modular Filter Systems Mobile extraction/filter units Central high vacuum systems Cutting, grinding, sanding On-tool extraction On-torch welding fume extraction Vacuum cleaning sets Mobile vacuum cleaning units Suction blaster Reels for different medias

11 Machining Milling, drilling and grinding generate metal chips which may affect the operations. Chips on the floor are safety risks. Oil mist in the air cause health problems. Slippery floors increases the costs for cleaning. Nederman systems keep machines and premises free from scraps and our NOM Oil mist filters purify the air from dangerous oil drops. Our solutions also include systems for swarf handling and processing, coolant filtration and oil/water separation. The effects are prolonged life of coolant, decreased costs for swarf handling, and higher prices for scraps. Nederman systems and solutions: Swarf handling, transportation/conveying Cutting oil and coolant filtration/purification Chip crushing and briquetting Oil mist filtration Machine and general cleaning Welding fume extraction and filtration Extraction of dangerous fumes and solvents Swarf crushing and coolant recovery Oil mist filtration Briquetting Coolant filtration and tramp oil separation Swarf and chip transportation Vacuum conveying systems Machine and general cleaning All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and Quick find: Extraction arms Oil mist filters Central high vacuum systems Vacuum cleaning systems Mobile vacuum cleaning units Reels for different medias

12 Vehicle Repair Shops & Vehicle Inspection Exhaust and welding fumes, dust from sanding and grinding, oil spillage and winding hoses - these are just some of the hazards in Vehicle Repair Shops and alike. A prosperous business is a question of a safe, tidy and well-organized workshop. Nederman offers a wide range of products and systems for all types of vehicles and any kind of vehicle workshop. Nederman systems and solutions: Reels for media supply Systems for handling, and administration of oil, grease and other liquids Exhaust extraction systems Cleaning systems for vehicles and premises Welding fume extraction/filtration Service unit for oil and liquids Exhaust extraction systems Vacuum cleaning system Central vacuum systems Central lubrication system incl. administration Sump oil handling PowerBox with compressed air, vacuum, and power supply Mobile oil handling Reels for air, water, power Extraction arms for welding fumes Mobile fume extraction unit All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and Quick find: Exhaust extraction systems Extraction arms Mobile extraction/filter units Central high vacuum systems Cutting, grinding, sanding On-tool extraction On-torch welding fume extraction Vacuum cleaning systems Mobile vacuum cleaning units Suction blaster Reels for different medias Control guns for oil and other fluids

13 Emergency stations Diesel engine exhaust fumes have a potential to cause a range of health problems. Nederman s exhaust extraction systems, designed specifically for emergency vehicles, remove the exhaust fumes right at the tail pipe which is the only effective way to do it. The range includes the unique MagnaSystem using an electromagnet to attach the hose to the vehicle permitting quick getaways and superior capacity for exhaust removal. The PTS system, which has a pneumatically attached nozzle, is perfect for stations where vehicles vary from time to time. Nederman systems and solutions: Exhaust extraction systems Reels for media supply Cleaning systems for vehicles and premises Welding fume extraction/filtration Mobile fume extraction unit Extraction arms for welding fumes Central vacuum systems Reels for air, water, power Mobile and stationary vacuum cleaning systems Exhaust extraction systems Quick find: All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and Exhaust extraction systems Extraction arms Mobile extraction/filter units Vacuum cleaning systems Mobile vacuum cleaning units Reels for different medias

14 Composites Composite working releases dust and fibres. These are small enough to enter human lungs and can penetrate the skin causing allergic reactions. The most efficient way to minimise the risks is to extract the substances directly at the source. Nederman is the leading supplier with extensive experience of designing and installing safe and efficient systems to composite working industries all over the world. Nederman systems and solutions: Dust extraction systems Reels for media supply Cleaning systems for vehicles and premises Welding fume extraction/filtration Hose- and Cable reels Swing arms PowerBox On-tool extraction systems Industrial cleaning systems Quick find: Complete vacuum/ filter system with safety devices All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and EX extraction arms...46 Mobile extraction/filter units...60 Central high vacuum systems...65 Cutting, grinding, sanding On-tool extraction...65 Vacuum cleaning systems...65 Mobile vacuum cleaning units...72 Reels for different medias

15 Food/Pharma/Chem The hygienic demands in food, chemical and pharmaceutical industries are very high. Equipment must be easy to clean and withstand detergents and chemical substances. Since explosive risks often occur where ingredients are handled, the equipment must meet the ATEX directives. Nederman offers a range of filters, arms and reels that are designed to meet the highest demands on hygiene as well as the ATEX standards. An installation can include cleaning systems to keep premises clean and free from potentially explosive dust. Nederman systems and solutions: EX extraction arms and filter systems for explosive dust and particles EX approved hose reels in stainless steel and conductive materials Industrial cleaning systems including EX approved mobile vacuum cleaners Complete vacuum/filter system with safety devices EX extraction arms for laboratories etc Industrial vacuum cleaning systems Hose reels Industrial cleaning systems EX extraction arms Quick find: All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and EX Bench Top Extraction Arms EX extraction arms FilterBox System for food/chem applications Central high vacuum systems Vacuum cleaning sets EX approved mobile vacuum cleaning units Reels for different medias

16 Shipping, Yards and Offshore Water, oil, sludge, mud, scale rags, rust, sand, etc. Our powerful vacuum units can virtually collect and transport anything that can flow through the hoses.therefore, the vacuum units are widely used for cleaning jobs in engine rooms, blacksmith workshops, hull buildings halls, on deck and in machines etc. Special units are also designed for stripping and cleaning of tanks, offshore and onshore in petrochemical industries. Our programme comprises both electric powered and air powered vacuum units, mobile and stationary. The air powered ejector units are available in a range of explosion safe models approved from Veritas/Nemko. Nederman systems and solutions: Shipping Engine room and deck cleaning Tank stripping Yards Cleaning operations in workshops, hull building halls Machine cleaning Grit recovery (blasting operations) Offshore Drilling mud collection Pump room, workshop and deck cleaning Mobile vacuum cleaning units Vacuum ejector systems for tank stripping etc Quick find: All the above products and systems are not presented in this catalogue. For further information contact your Nederman sales representative. Also see the Nederman Design & Enginering Guide and Mobile vacuum cleaning units incl EX approved Reels for different medias

17 Exhaust Systems for Stationary Vehicles The systems presented in this section are used for extracting exhaust from parked vehicles. All solutions offer simple installation and optimal extraction efficiency. Nederman also has systems for Moving Vehicles. For further information about Systems for Moving Vehicles please contact your local Nederman sales representative. Also see the Nederman Design & Engineering Guide and Selection Guide Hose reel Stationary vehicles Moving vehicles Stationary/ moving vehicles Single/ Twin extraction Rail 920 Track arm Rail 920 ALU Straight Flowline separate return Magna Pneumatic Track Rail Manufacturer Production line x x x x x Testing station/ inspection centre Repair shop - passenger cars Repair shop - heavy commercial vehicles Repair shop - public transportation Nozzles Rectification area x x x x x x x Single step x x x x x x x Double step x x x x x x x Multi step x x x x Brake testing x x x x x x x x Emission testing x x x x x x x x x Repair bay x x x x x Repair bay x x x x x x x Repair bay x x x x x x x x x x Bus garage x x x x x x x Airports/ Inspection x x x x x x x x x Military facilities Repair bay x x x x x Tank repair x x x x x x x Fire and rescue Parking bays x x x x Repair and service x x x x x x x Hoses 17

18 Single/Twin Exhaust Extractor Single Exhaust Extractor is a reliable and functional solution for all types of stationary vehicles. Available with balancer or a cord for manual hose suspension. The balancer automatically raises the hose and nozzle after disconnection, and keeps them lifted at all times. Models for high temperature application are available. Twin Exhaust Extractor removes exhaust fumes from two vehicles at the same time, or from vehicles with twin exhaust pipes. Easy handling of exhaust hose Takes up very little space Low cost solution Easy to install Prepared for fan mounting on bracket Single Exhaust Extractor without fan Hose Ø, mm Hose type* Hose length, m Balancer Cord suspension Automatic disconnection Exhaust nozzle 75 NR-B 5.0 X NR-B 5.0 X NR-CP 7.5 X NR-CP 6.0 X X included NR-CP 7.5 X NR-CP 6.0 X X included NFC X NFC X included Single Exhaust Extractor complete with fan Hose Ø, mm Hose type* Hose length, m Cord suspension Fan included Exhaust nozzle 75 NR-B 5.0 X N NR-B 7.5 X N NR-B 5.0 X N24 Part no included Twin Exhaust Extractor Hose Ø, mm Hose type* Hose length, m Cord suspension 100 NR-B 5.0 X * Hose type - see separate section Single/Twin Extractor support For hose Ø, mm x

19 Exhaust Hose Reel 865 Spring recoiled For all types of vehicle workshops, etc. where the hose can hang at a reachable height. The patented spring drive makes the reel very easy to handle. A patented integrated automatic damper saves energy and reduces the noise level. Optional retraction control is available for increased safety and efficiency. Mounting of fan on reel is possible. The spring recoiled hose reel can be upgraded to motor drive. Simple and safe installation Automatic damper for energy savings Simple adjustment of lifting capacity Automatic fan on/off switch as option Retraction control as option Hose Ø, mm Hose type* Hose length, m, included * Hose type - see separate section ** Selection of additional hoses: see separate hose section Max possiblehose length, m** Type of body Automatic damper Reinforced spring Reel with hose 75 NR-B short X NR-CP short X Reel without hose short X NR-B short X NR-CP 7,5 7.5 short X NR-B 10, wide X NR-CP wide X short wide short X wide X NR-B short X NR-CP short X NR-B wide X wide wide X NR-B short X NR-CP short X NR-B wide X X NR-CP wide X X short wide X short X wide X X wide x/double

20 Exhaust Hose Reel 865 Electric motor driven The best solution in workshops with a high ceiling, where overhead cranes etc. have to be considered, or where high vehicles must pass. Operated via a hand unit either an IR control or pendant control. A receiving eye on the reel shows the status of operation. Electronic limit switches reduce the risk of malfunction and unnecessary wearing of the hose. Fan start/stop is automatically controlled. Mounting of fan on reel is possible. Convenient and safe operation Automatic fan operation Settings for limit switches made from floor level Compact, modern design Quick & easy installation reduces cost Power supply, V Phase 1 Frequency, Hz 50/60 Max lifting capacity, kg 30 Hose Ø, mm Hose type* Hose length, m, included * Hose type - see separate section ** Selection of additional hoses: see separate hose section Max possible hose length, m** Type of body For hand control Limit switches Reel with hose 100 NR-CP wide IR or pendant X NFC wide IR or pendant X Reel without hose short IR or pendant X wide IR or pendant X NR-CP wide IR or pendant X NFC wide IR or pendant X wide IR or pendant X NR-CP wide IR or pendant X NFC wide IR or pendant X wide IR or pendant X wide IR or pendant X

21 Exhaust Hose Reel Accessories Description For spring recoiled reel For motor driven reel 1 Retraction control kit X On/off switch X Pendant control, incl. 5 m cable. X IR-transmitter. X Fan bracket X X Hose adapter Ø75 mm X Hose adapter Ø100 mm X X Hose adapter Ø125 mm X X Hose adapter Ø150 mm X X Hose stop Ø75 mm X Hose stop Ø100 mm X Hose stop Ø125 mm X Hose stop Ø150 mm X Transformer for fan controls 230/24V, 75VA, 50 Hz X X Transformer for fan controls 230/24V, 25VA, 50 Hz X X Spring 25 x 1.0 x mm X Spring 25 x 1.1 x mm X Spring 40 x 1.0 x mm X Upgrade-kit for double springs (excluding springs). X Extraction trolley Reel on Rail, for spring recoiled reel used in combination with rail ALU 150. For X further information, please contact your nearest Nederman dealer. 21

22 Exhaust Rail System 920 Easy to handle systems for all types of workshops. Consists of a basic rail system which is completed with an exhaust extraction kit. Very high extraction efficiency. One extraction unit can serve several workbays. Extraction units are easy to move, thanks to light-weight material and ball bearing wheels. Two 400 units serve cars with twin exhaust pipes. Manual disconnection of exhaust nozzles. For choice of nozzles, see Exhaust nozzles. Compact, modern design Easy to position Automatic damper for airflow control Quick and simple installation reduces cost Rail kit 920** Length, m Exhaust Extraction unit with trolley, hose Trolley Hose Ø, mm Hose type* Hose length, m Nozzle storage Balancer Damper Hose suspension NR-B 5.0 X X NR-CP 5.0 X X NR-B 7.5 X X NR-B 5.0 X X NR-CP 5.0 X X NR-B 7.5 X X NR-CP 5.0 X X X NR-B 5.0 X X X NR-CP 5.0 X X NR-B 5.0 X X Accessories Rail kit For 400-trolley For trolley Top connection. Outlet: Ø 200 mm X Damper, Ø100 mm X Damper, Ø160 mm X Balancer kit X Safety coupling, Ø100 mm X Safety coupling, Ø150 mm X * Hose type - see separate section ** Complete with suspension parts, joint connectors, rubber seals, end covers and end stops. For rail lengths > 50 m (154 ft.), please contact your local Nederman dealer. 22

23 Balancer The balancer supports the exhaust hose and keeps the hose and nozzle lifted at all times. The reversed spring power makes handling the hose very easy and safe, offering an even pulling force and lifting power. An integrated centrifugal brake prevents the hose from being lifted too quickly, which minimizes the risk of personal injury and damage to vehicles. Hoist length: 8m (26 ft.). Makes the hose easier to handle Reduces wearing of hose and nozzle Safe balancer operation Exceptional hoist length Description Capacity, kg Balancer, incl latch Balancer, incl latch Accessories Pivoting bracket On/off switch Emission Test Kit This kit is a well proven solution for emission tests on both cars and trucks. Based on Single Exhaust Extractor, the emission test kit has a capacity to handle large volumes of high temperature exhaust. The specially designed funnel can be angled vertically, and is adjustable in height as well. The funnel is slotted for exhaust gas analysis device. Funnel fully adjustable System handles large volumes of hot exhaust Suitable fan is included Hose Ø, mm Hose type* Hose length, m Fan Exhaust nozzle 150 NR-B (N24, 50 Hz) included included NR-B (N40, 60 Hz) included included NR-B (N40, 50 Hz) included included *Hose type - see separate section Emission Test Funnels 1 2 Description Connection to hose Ø, mm Part no 1 For cars. Suitable also for downward facing or hidden exhaust pipes Funnel rotatable 360, vertically adjustable mm. Complete with stand, which includes four wheels, two with brake. 2 For heavy vehicles. Complete with stand. Vertically adjustable mm

24 Trackarm System Wall mounted Trackarm System is designed for heavy stationary vehicles. It is a solution for premises where crane bridges, height of ceiling, etc. make ceiling mounting of other systems difficult. The horizontal hose is compressible, and fixed to a 180 pivoting arm. The balancer keeps the hose lifted and stretched at all times. This makes Trackarm System very flexible to use and easy to operate. The Trackarm System consists of: wall bracket, extraction arm, horizontal hose, vertical hose, trolley, balancer, nozzle. Simplifies handling of large and heavy hoses Reaches exhaust pipes anywhere within an area of 76 m² (818 sq.ft.) Safe operation with safety coupling For large airflow requirements Out of the way for free passage Hose Ø, mm Hose type* Working range, m Exhaust nozzle 150 NFC included NFC included * Hose type - see separate section 24

25 Exhaust Nozzles Nederman offer an extensive range of robust rubber and metal nozzles to accommodate various types of vehicles and systems. Adjustable test funnels with the special design enables the handling of large volumes of hot exhaust from vehicles in inspection centers for example. Resistant to very high temperature exhaust up to 150 C (300 F) normal use Easy manual connection and disconnection Well proven models with cover that protects workforce and vehicles Rubber Nozzles with manual disconnection B Nozzle Type Description: For cars Description: For heavy vehicles Max exhaust pipe Ø: Single, mm Max exhaust pipe Ø: Twin, mm Connection to hose Ø, twin, mm 1 Break nozzle x Break nozzle x Break nozzle x x Break nozzle x x Break nozzle x x Break nozzle x x Slips on to the exhaust pipe. Without locking device. x & Spring-loaded lid, wire guard and opening for CO-probe.Without x x locking clamp. 3B Adapter for Ø75 mm hose, for nozzle no x Spring-loaded lid, wire guard, metal hose and opening for CO-probe x x Spring-loaded lid, wire guard, metal hose and opening for CO-probe x x Spring-loaded lid, wire guard, metal hose and opening for CO-probe x x Wire guard and opening fo CO-probe. Without lid x x Wire guard and opening fo CO-probe. Without lid x x Wire guard and opening fo CO-probe. Without lid x x Wire guard and opening fo CO-probe. Hose connection angled 60 x x Wire guard and opening fo CO-probe. Hose connection angled 60 x x Wire guard and opening fo CO-probe. Hose connection angled 60.For trim exhaust pipes. x x Lid wire guard and metal hose. x Lid wire guard and metal hose. x Lid wire guard and metal hose. x Wire guard and opening for CO-probe. Hose connection angled 60 x X Wire guard and opening for CO-probe. Hose connection angled 60 x X Wire guard x Wire guard x Swivel and lengthwise compressible hood. x x Swivel and lengthwise compressible hood. x x Nozzle with floor stand. Vertically adjustable. Suitable when a locking clamp cannot be used. x* All rubber nozzles are resistant to temperatures up to 150 C (300 F). * Also for motorcycles. 25

26 Metal Nozzles with manual disconnection Description Max. exhaust pipe Ø, single, mm Connection to hose Ø, mm For heavy vehicles. Made of aluminium. With wire guard For heavy vehicles. Made of aluminium. With wire guard Nozzles for vertical exhaust pipes Description Max. exhaust pipe Ø, mm Connection Ø, mm 1 Galvanized steel nozzle for stack pipes, length: 2600 mm Rubber cone nozzle Rubber cone nozzle /150/ Galvanized steel cone nozzle Galvanized steel cone nozzle Telescopic lifting pole for rubber cone nozzle ( , ) Nozzles for built-in and covered exhaust pipes Description Plastic housing/rubber hood Internal grip in two length positions Exhaust pipe Ø mm. Single Exhaust pipe Ø mm. Twin (W x H) Connection to hose Ø, mm x (50-65) Accessory for exhaust nozzles Description Adapter for double exhaust pipes, with two hoses, each Ø100 mm, length 1.25 m

27 Exhaust Hoses The Nederman exhaust hoses are specifically designed to be ductile and to have a very low pressure drop. They are resistant to all chemicals in diesel and petrol exhaust fumes, and show high resistance to mechanical stress. 1, Basic rubber hose (NR-B) For light duty Temp. resistance: Continuous use: up to +150 C (300 F) Light weight and abrasion resistant 2. Crush-proof rubber hose (NR-CP) Heavy duty hose Crush-proof and abrasion resistant Temp. resistance: Continuous use: +150 C (300 F) Intermittent use: +170 C (340 F) Hose Ø, mm Hose length, m Hose Ø, mm Hose length, m High temperature hose (NFC-3) Temp. resistance: Continuous use: +300 C (570 F) Intermittent use: +350 C (660 F) Light weight and highly resistant to diesel particles 4. Extremely high temp. hose (NFC-6.5) Temp. resistance: Continuous use: +650 C (1200 F) Intermittent use: +750 C (1380 F) Asbestos free, high temperature fabric and silicone free Hose Ø, mm Hose length, m Hose Ø, mm Hose length, m

28 Exhaust Hoses Accessories Description Ø, mm 1 Connector, galvanized steel Connector, galvanized steel Connector, galvanized steel Bend 90, galvanized steel Bend 90, galvanized steel Bend 90, galvanized steel Bend 90, galvanized steel Rubber cover with hose clip, pair Rubber cover with hose clip, pair Rubber cover with hose clip, pair Rubber cover with hose clip, pair Rubber cover with hose clip, pair Joint piece, galvanized steel, with hose clamp & rubber cover Joint piece, galvanized steel, with hose clamp & rubber cover Joint piece, galvanized steel, with hose clamp & rubber cover Joint piece, galvanized steel, with hose clamp & rubber cover Joint piece, galvanized steel, with hose clamp & rubber cover Quick coupling, galvanized steel, male Quick coupling, galvanized steel, male Quick coupling, galvanized steel, male Quick coupling, galvanized steel, male Quick coupling, galvanized steel, female Quick coupling, galvanized steel, female Quick coupling, galvanized steel, female Quick coupling, galvanized steel, female Hose suspension Hose suspension Hose suspension Hose suspension Hose suspension Hose coupling, incl two sleeves and removable strap Hose coupling, incl two sleeves and removable strap Hose coupling, incl two sleeves and removable strap Hose coupling, incl two sleeves and removable strap

29 Bench Top Extraction Systems The Nederman Bench Top Systems can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital. A Bench Top Extraction system is available as a complete readyto-use kit or as separate parts to built up a customized extraction system. Many mounting alternatives: standing, hanging or attached to the wall Flexible in all directions Low pressure drop and low noise level Application areas Electronics industries/soldering Museums/conservation Laboratories Dental laboratories Operating rooms Goldsmiths/Jewellers School chemistry laboratories Manicurists/pedicurists Prostheses production Mechanical workshops Selection Guide Type FX32 FX50 FX75 FX100 Description Flexible plastic hose without joints. Lightweight, anodized aluminium arms with adjustable plastic friction joints. Applications A cost-effective arm for small workplaces and light applications, for extraction of soldering fumes and light particles. For extraction of light fumes, dust etc. Capacity up to 110 m³/h (65 cfm). Lightweight, anodized aluminium arms with adjustable plastic friction joints. For use where a higher capacity is needed - up to 240 m³/h (141 cfm). Lightweight, anodized aluminium arms with adjustable plastic friction joints. For industrial, large scale laboratories, workshops etc, where a high extraction capacity is requested - up to 500 m³/h (294 cfm). Extracts dust, larger particles (welding, soldering). Arm Ø, mm ORIGINAL For normal use x x x x ESD/EX For electronic applications and in environments with risk x (only ESD) x x x of explosion CHEM For chemical applications with corrosive gases. x x 29

30 Bench Top Extraction Kits The Bench Top extraction kits include FX Original extraction arm(s) with hood or nozzle, N3 fan with speed control and standard filter (particle, HEPA and gas), hose(s), connection details, and table bracket(s). Kit Description arm(s) Max. airflow, m³/h V / Electric plug Frequency, Hz Power, W Arm Ø, mm Arm length, mm Hose Ø, mm Hose length, m Temperature extracted air, C Weight complete kit, kg x FX / EUR 50/ to x FX / UK 50/ to x FX / EUR 50/ to x FX / UK 50/ to x FX / EUR 50/ to x FX / UK 50/ to x FX / EUR 50/ to x FX / UK 50/ to x FX / EUR 50/ to x FX / UK 50/ to x FX / EUR 50/ to x FX / UK 50/ to Extraction Kit x arm, Ø32 mm (1¼ inch) 1 x dome hood 1/2 Extraction Kit x arm, Ø50 mm (2 inch) 1 x combination hood Extraction Kit x arms, Ø32 mm (1¼ inch) 2 x dome hood 1/2 Extraction Kit x arms Ø50 mm (2 inch) 2 x mini hood Extraction Kit x arms, Ø32 mm (1¼ inch) 3 x dome hood 1/2 Extraction Kit x arm, Ø75 mm (3 inch) 1 x mini hood 30

31 Bench Top Extraction Arms and Accessories A customised Bench Top Extraction System consists of an extraction arm (Original, ESD/EX or CHEM) always with a mini hood (universal interface for other hoods), completed with different accessories such as brackets, extension arm, reducers, hoses etc. These parts are ordered separately. A Bench Top Extraction system can be connected to a single fan/filter N3, or to a central fan/filter system. Arms Connection direction* Arm Ø, mm Arm length, mm Recommended airflow, m³/h Temperature of extracted air, C ORIGINAL ESD/EX Up/down qp Up/down qp to Down q to Down q to Up p to Up p to CHEM Down q to Down q to Up p to Up p to Up/down qp to Down q to Up p to Up p to * Note: Different spring mechanisms are fitted depending on connection direction Arm 32 Arm 50/75/100 Connection up/down Connection up p Wall mounting Ceiling mounting Connection down q Floor mounting Bench mounting 31

32 Accessories Brackets Description Fits Arm model Size, mm 1 Table bracket Wall bracket Bracket complete 50 / 75 / 100 L= Bracket 50 / 75 / Extension profile 50 / 75 / 100 L= Extension profile 50 / 75 / 100 L= Table bracket 50 / 75 / Cover ring, ceiling 50 / 75 Ø 130, T=3 (1/8)* Support collar 50 / 75 / * T=thickness Reducers Description Fits Arm model Size, mm 8 Reducer 50 / 75 / 100 Ø Reducer 50 / 75 / 100 Ø Reducer 50 / 75 / 100 Ø Reducer 50 / 75 / 100 Ø Hoods Description Fits Arm model Size, mm ORIGINAL ESD/EX CHEM 12 Flange hood x Dome hood 1/ x Dome hood 1/1 32 Ø Metal hood 50 / 75 / 100 Ø Combination hood 50 / 75 / x Flange hood 50 / 75 / x Hoses Hose Ø, mm Length, mm ORIGINAL Colour ORIGINAL ESD/EX Colour ESD/EX black white black grey black grey black grey black Down Flow Grille FD 23 An extraction device designed to be integrated in the bench top surface. It is highly effective in capturing the heavy fumes from gluing, solvents and similar. Recommended to use together with fan N3 and filter. Description Dimension Extraction grille made of stainless steel Grille Ø 260 mm, connection Ø 45 mm Reduction 45/32 mm

33 N3 Fan with Filter The unit consists of a separate filter cartridge and a N3 fan. It is designed for extraction and filtration of fumes and vapours emitted when soldering, gluing or working with solvents. For use in different combinations with the FX arms or the Down Flow Grille FD 23. Easy to install The Filter Cartridge Standard consists of particle, HEPA and gas filter The FIlter Cartridge Gas is a pure carbon filter The filter cartridges are disposable and easy to change Filters for Kit Filtration degree at µm DOP, % Filter Cartridge Standard Filter Cartridge Gas ,97 - Particle filter area, m Gas adsorption media, kg 1,5 4 Size, LxWxH, mm 388x288x x288x285 Weight, kg Fan with speed control With EUR plug With UK plug Power, kw Airflow, m³/h Voltage, V Frequency, Hz 50/60 50/60 Phase 1 1 Connection Ø, mm Size, LxWxH 320x140x x140x270 Weight, kg Complete unit Fan/Filter Noise level, db(a) Height, mm Weight, kg Accessories Silencer/ESD Box, for Bench Top Kit Adapter for connecting two N3 filter cartridges

34 Extraction Arms and Filter Systems The Nederman range of low vacuum extraction arms covers a wide variety of applications. All arms are highly flexible, and simple to position, extend and retract. Different attachments are available for wall, ceiling or extension bracket mounting as well as a number of accessories, including hoods and dampers to improve efficiency. The arms are connected to a vacuum and filter system removing the contaminants from the extracted air so that it can be returned to the atmosphere or recycled without negative effects. Selection Guide Extraction Arms Extraction of fumes, vapours and dust. Schools, limited spaces, small booths. Extraction of fumes, vapours and dust. Small workshops, metal fabrication shops. Extraction of heavy smoke, vapours and dust. Heavy engineering workshops, welding, laser cutting, grinding with spatter. Standard Telescopic Original/ Original CR X X X NEX MD NEX HD Welding/ grinding table X X X X X X X X Recommended airflows, m³/h Maximum fume temperature, C Not applicable Noise level at hood, db(a) Damper Optional Optional Standard Standard Standard Hose material PVC covered PVC covered PVC covered PVC covered Glass fibre reinforced Not applicable aluminium foil polyester fabric polyester fabric polyester fabric PVC covered polyester fabric Connection Ø, mm / / /250 Note Built in wall bracket swivel swivel 360 swivel swivel 360 swivel swivel 360 swivel swivel Not applicable Selection Guide - Extraction and Filter Systems Product Description Applications: Service, maintenance and light production Fume Eliminator 840/841 FilterCart Original FilterCart W3 FilterCart Carbon FilterBox MFS Filter For mobile welding jobs in narrow spaces. To be connected to a welding torch or an extraction nozzle. For welding applications. Complete unit with filter, fan and Original extraction arm. For welding applications. Fulfills W3 from BGIA. Complete unit with filter, fan and a specially designed metal hood with spotlight, for maximun extraction. With alarm for exchange of filter cartridge. For extraction of odours from fumes, solvents and gas contaminants. Complete unit with filter, fan and extraction arm. Modular system for welding and dust applications. Can be equipped with compressed air cleaning for extra efficient filter cleaning. Modular filter systems. Three different and non cleanable filter cartridges: particle, micro/hepa, and gas. To be combined with fan and arms. Expandable capacity Applictions: Light to heavy production Type: Portable extration unit Type: Mobile extraction unit Type: Fixed/stationary extraction installations Filter: Cleanable Filter: Disposable X X X X X X X X X X X X X X X X X X X For further information please contact your local Nederman sales representative. Also see the Nederman Design Guide and

35 Extraction Arm Standard Nederman Extraction Arm Standard is specially designed for working environments with fumes, vapours or non explosive dust, where the demands for higher airflows and temperatures are moderate. Typical workplaces can be welding schools, different types of applications in light production. The applications can be welding, grinding, or other industrial processes where an easily positioned arm is required. The arm is available in two lengths, 2 and 3 m (7 and 10 ft.) and equipped with a high efficiency extraction hood. The arm is flexible in all directions and simple to position Designed for wall mounting and suspended by an integrated wall bracket/ 90 degree bend Allows rotation of 180 degrees Can be equipped with a damper placed in the bend as an accessory The hood can be tilted in all directions Pressure drop Ø Ø 12 (x4) X: airflow m ³ /h Y: static pressure Pa A: 3 m (10 ft.) B: 2 m (7 ft.) Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) Standard arm 2 m Standard arm 3 m Weight, kg Kit consists of Standard arm 2 m + N16 3 phase 230/400V fan + Wall bracket + Fan Manual Starter Standard arm 3 m + N16 3 phase 230/400V fan + Wall bracket + Fan Manual Starter Accessories: see end of chapter 35

36 Extraction Arm Telescopic The Nederman Telescopic arm is specially designed for working environments with fumes, vapours or non explosive dust, where the space is limited. Typical workplaces can be welding schools or for production in small welding booths. The applications can be welding, grinding, or other industrial processes where a small, easily positioned arm is required. The reach of the arm is between 0.9 and 1.6 m (3 and 5 ft.). The arm is flexible in all directions and simple to position and to extend The arm has a balanced telescopic action by an adjustable balance block The assembly is suspended by a swivel, which allows it to rotate 360 degrees The hood can be tilted in all directions Pressure drop (mm) 198, Ø Ø9 (x4) ~2300 X: airflow m³/h Y: static pressure Pa Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) Telescopic arm with metal hood Telescopic arm with Original hood Weight, kg Accessories: see end of chapter 36

37 Extraction Arm Original It is specially designed for working environments with fumes, vapours or non explosive dust. Typical workplaces are the metal fabrication industry or other types of industries where extraction is needed. The applications can be welding, grinding, or other industrial processes where an easily positioned arm is required. The product is equipped with a damper in the hood as standard. Swivel allows the product to rotate 360 degrees The arm is flexible in all directions and simple to position The product can be mounted in combination with different brackets, extension arms, on exhaust rails or on fixed or mobile filter equipment. The product is equipped with a damper in the hood as standard The hood on all models can be tilted in all directions Pressure drop (mm) 198, Ø 160 Ø 9 (x4) ~2400 X: airflow m ³ /h Y: static pressure Pa A= 4 m (14 ft.) horizontal, B= 4 m (14 ft.) vertical, C= 3 m (10 ft.), D= 2 m (7 ft.) Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) Original arm 2 m / Original arm 3 m / Original arm 4 m vertical / Original arm 4 m horizontal / Weight, kg Kit consists of Original arm 2 m + N16, 3 phase, 230/400V fan + Wall bracket + Fan Manual Starter Original arm 3 m + N24, 3 phase, 230/400V fan + Wall bracket + Fan Manual Starter Original arm 4 m vertical + N24, 3 phase, 230/400V fan + Wall bracket + Fan Manual Starter Accessories: see end of chapter 37

38 Extraction Arm Original CR Specially designed for working environments with fumes, vapours or non explosive dust. The arm has extended corrosion protection since all aluminium details including the arm system are anodized. Typical workplaces are food, pharmaceutical and chemical industries, and any other type of industry where an easily positioned corrosion resistant arm is required. Swivel allows the product to rotate 360 The arm is flexible in all directions and simple to position The product can be mounted in combination with different brackets, extension arms, on exhaust rails or on fixed or mobile filter equipment The product is equipped with a damper in the hood as standard The hood on all models can be tilted in all directions Pressure drop (mm) 198, Ø 160 Ø 9 (x4) ~2400 X: airflow m ³ /h Y: static pressure Pa A= 4 m (14 ft.) horizontal, B= 4 m (14 ft.) vertical, C= 3 m (10 ft.), D= 2 m (7 ft.) Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) Original arm CR 2 m / Original arm CR 3 m / Original arm CR 4 m vertical / Original arm CR 4 m horizontal / Weight, kg Accessories: see end of chapter 38

39 Extraction Arm NEX MD Nederman NEX MD is an extraction arm for medium to heavy duty applications. The arm has a Ø160 mm (6¼ inch) hose, which together with the external arm system provides a high airflow and a low pressure drop. Perfectly balanced and simple to position. Robust swivel - allows 360 rotation Encapsulated support mechanism protects the arm against dust and dirt Can be mounted on brackets, extension arms and exhaust rails With a damper in the hood - saves energy when not in operation The hose is easy to remove for cleaning The hood can be tilted in all directions Pressure drop (mm) Ø 160 ~ Ø 11 (x4) X: airflow m ³ /h Y: static pressure Pa A: 5 m (16 ½ ft.), B: 4 m (14 ft.), C: 2 m (10 ft.) and 3 m (7 ft.) Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) NEX MD 2 m NEX MD 3 m NEX MD 4 m NEX MD 5 m Weight, kg Accessories: see end of chapter 39

40 Extraction Arm NEX HD The Nederman NEX HD extraction arm is the top of the range arm when it comes to high airflows and extraction of media with higher temperatures than normal. The arm is specially designed for working environments with very heavy smoke, vapours or non explosive dust. The applications can be welding, laser or hand plasma cutting, metal spraying, grinding where lots of spatter is generated, or other industrial processes where a perfectly balanced and easily positioned arm is required. Robust swivel, which allows the product to rotate 360 degrees Support mechanism of the arms is encapsulated which protects against dirt Can be mounted in combination with different brackets, extension arms or on exhaust rails Equipped with a damper in the hood as standard The hose is easy to remove for cleaning Minimized pressure drop and a low noise level Pressure drop (mm) ~ Ø 11 (x4) Ø 200 X: airflow m ³ /h Y: static pressure Pa A: 5 m (16 ½ ft.), B: 4 m (14 ft.), C: 3 m (10 ft.), D: 2 m (7 ft.) Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) NEX HD 2 m NEX HD 3 m NEX HD 4 m NEX HD 5 m Weight, kg Accessories: see end of chapter 40

41 Welding and Grinding table Industrial welding and grinding table for extraction of fumes, dust and particles at welding and grinding operations. It can also be used in explosive environments, if grounded accordingly. The table is not suitable for cutting. The table facilitates suspension of the welding torch when not in use. Underneath the working area a dust drawer takes care of the heavy dust. The drawer can easily be emptied from the front of the table. The duct connection for the external fan is located on top of the table and it is recommendable to use a filter device between the table and the fan. Suitable filters can be FilterBox, FilterMax C25 or the modular FilterMax models. Easy to install Sturdy industrial design Flexible in terms of installation possibilities Flexible extraction capacity Maintenance friendly Two welding and grinding tables connected to a FilterMax DF 80 and an NCF central fan. The installation is controlled by a Fan Inverter. Each extraction point can be shut off by a motor damper. Pressure drop Y A B C X X: Airflow m³/h, Y: Static pressure (Pa), A=900, B=1350, C=2000 Description Rec. airflows m³/h Volume dust container, litres Weight, kg W1 W2 D1 D2 D3 H1 H2 C/C Ø1 Ø2 Part No. Welding/ grinding table Welding/grinding table Welding/grinding table x Accessories: see end of chapter 41

42 Extension Arm The Nederman Extension Arm, 4.2 m or 6.0 m (14 ft. or 20 ft.), is designed to be used when extra reach is needed. Combine it with fume or dust extraction arms, or exhaust extraction equipment for cars or trucks. Made of robust steel profiles. Suspended by a pivoting wall bracket and equipped with a joint in the middle, which makes it flexible in all directions. It is possible to add other equipment to the Extension Arm, such as welding machines, and hose and cable reels. A universal bracket makes it possible to fit additional equipment directly on to the Extension Arm The duct kit must be ordered separately Recommended airflows Recommended maximum negative pressure Connection diameter Maximum load on outer arm 4.2 m Maximum load on outer arm 6.0 m Recommended installation height from floor level Max m³/h 3000 Pa 200 mm 100 kg 60 kg m Pressure drop Examples of Extension arm with additional equipment. Recommended extraction arms Extraction arm Original Extraction arm NEX MD Extraction arm NEX HD Maximum 4 m Maximum 3 m Maximum 3 m mm (inch) dia.14(0.55)x4 180 (7) X: airflow m ³ /h Y: static pressure Pa A: Extension arm bent 40 (to its limit). B: Extension arm bent 90. C: Extension arm is straight ( ) 480 (19) 90 (3.5) Extension arm 4.2 m: 2210 (87) Extension arm 6.0 m: 3100 (122) 4100 (161) 6050 (238) Description Recovery rate by weight, % Weight, kg Materials Part no Extension arm 4.2 m Powder painted steel Extension arm 6.0 m Powder painted steel Accessory Recovery rate by weight, % Weight, kg Materials Part no Cable for light kit Suspension for Exhaust Hose Reel Powder painted steel Duct kit consists of Max temp of extracted air, C Recovery rate by weight, % Weight, kg Materials Part no Duct kit 4.2 m Fume Galvanized steel duct, PVC hose Duct kit 4.2 m Exhaust Galvanized steel duct, NR-B hose Duct kit 6.0 m Fume Galvanized steel duct, PVC hose Duct kit 6.0 m Exhaust Galvanized steel duct, NR-B hose

43 Fume Extractor on Rail The Nederman Fume extractor trolley with extractor arm, is intended to be used in combination with the rail Nederman ALU 150 when extraction from long working areas is required. One extraction arm can serve several work places The trolley is easily moved along the rail The trolley fits Nederman extraction arms shown below Description Length, m Trolley Rail stiffener, one pc per metre rail Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* Straight rail ALU 150* * Including rubber lips, joint connectors, suspension brackets, limit stops and end covers. For rail lengths > 50 m (164 ft.), please contact your local Nederman dealer. Accessory Top outlet, Ø 200 mm Recommended extraction arms Extraction Arm Original Extraction Arm Telescopic Extraction Arm NEX MD Extraction Arm NEX HD Maximum 4 m All models Maximum 3 m Maximum 3 m 43

44 Bodywork Extraction Arm The Nederman Bodywork extraction arm is based on the Original arm. It is specially designed for the extraction of fume, dust and vapours created during vehicle bodywork when welding, grinding or painting. The arm is available in a length of 5 m (16½ ft.). The product can be mounted in combination with different types of brackets. A swivel allows the product to rotate 360 degrees The arm is flexible in all directions and simple to position The product is equipped with a damper in the hood as standard Two 4-way friction joints makes it easy to position above or below vehicle body The 5m length gives easy access to all four corners of the vehicle Mounting height approx. 4 m (14 ft.) Pressure drop X: airflow m³/h Y: static pressure Pa Description Bodywork arm 5 m Reach, m 5 Airflow, m³/h Connection Ø, mm 150/160 Max. fume temperature, C 70 Accessories: see end of chapter Noise level at hood, db(a) Weight, kg

45 Windscreen Extraction Arm The Nederman Windscreen extraction arm is based on the Original arm and specially designed for extraction of adhesive vapours generated when working with windscreens, when removing, replacing or mounting. The arm is available in a length of 4 m (14 ft.) and has a rectangular extraction hood with an elongated opening along the edge, designed to take care of the vapours when working with windscreen glue. Suspended by a swivel, which allows the product to rotate 360 degrees Flexible in all directions and simple to position Can be mounted in combination with different brackets, extension arms or on exhaust rails Equipped with a damper in the hood as standard Hood dimension: 1200 x 640 mm (47 x 25 in.) Description Reach, m Airflow, m³/h Connection Ø, mm Max. fume temperature, C Noise level at hood, db(a) Windscreen hood with damper on an / Original 4m Horizontal arm Windscreen hood with damper / Weight, kg Kit consists of Original arm 4m Horizontal + N24 3 phase 230/400V fan + Wall bracket + Fan Manual Starter + Windscreen Hood Accessories: see end of chapter 45

46 Extraction Arms for explosive environments The range of NEX extraction arms is specially designed for working environments with fumes, vapours or explosive dust and also where the hygienic demands are high and large airflows are required. Typical workplaces can be found in industries such as pharmaceutical, food process and technical chemical. Extraction Arm NEX D Enclosed support arm, separate hose and a stainless steel hood means the NEX arm requires little maintenance and is easy to clean. The arm is single earthed by the helix in the hose. The hose is made of PVC with FDA approved components. The Nederman NEX D is recommended for use in explosive environments, zone 22 D. Extraction Arm NEX DX Enclosed support arm, separate hose and a stainless steel hood means the DX arm requires little maintenance and is easy to clean. The arm is double earthed by the helix in the hose and through the arm system. The hose is made of polyurethane. The Nederman NEX DX is recommended for use in explosive environments, zone 21 D. Extraction Arm NEX S Open support arm system and hood of acid proofed polished stainless steel requires little maintenance and makes it easy to clean. The arm is double earthed by the helix in the hose and through the arm system. The Nederman NEX S is recommended for use in explosive environments, zone 1/21, 2/22 D/G. For further information please contact your local Nederman sales representative. Also see the Nederman Design Guide and

47 Extraction Arm accessories Description Original Telescopic Standard NEX HD NEX MD 1 Wall bracket for 2 m and 3 m arm X X Wall bracket for 4 m and 5 m arm X X m Extension wall bracket X X m Extension wall bracket for 2 m and 3 m arm X X Wall bracket X X m Extension wall bracket X X m Extension wall bracket X X Spotlight/Fan Switch, 24V, 20W, Original hood * X X X Relay for spotlight part no * X X Spotlight/Fan Switch, 24V, 20W, Metal hood X X Spotlight/Fan Switch, 24V, 20W X Spotlight/Fan Switch, 24V, 20W, MD hood * X Fan Switch X Fan Switch, Metal hood X X Spark protection, Original hood X X X Spark protection, Metal hood X X Spark protection NEX HD X Metal hood with damper X X Damper X Silencer for fan X X Silencer for fan X X Wall bracket for silencer X X X X *) When using external power 24 V and no Nederman Fan Starter, a relay (part no ) must be installed between the spotlight and the contactor. 47

48 Fans The N series fans presented in this catalogue are important components in Nederman s products for fume extraction and filtering, as well as for vehicle exhaust extraction. The N fans cover from 0.55 kw to 2.2 kw (0,5 Hp to 3,0 Hp), and have an airflow capacity of m³/h ( cfm). NCF, Nederman Central Fans with capacities for industrial process ventilation systems Beside the N series fans Nederman offers centrifugal fans for larger industrial applications. The NCF series fans are from 2.2 kw to 18.5 kw (0,5 Hp to 3,0 Hp) and have an airflow capacity of up to m 3 /h ( cfm). They are powerful fans with a robust construction of welded steel manufactured to withstand industrial operation. NCF DX fans for explosive applications NCF DX is a series of explosion proof central fans designed to suit Nederman s FilterMax DX programme or similar systems. The NCF DX fans are approved for conductive dust in zone 22 in accordance with ATEX directive 94/9 group 2, category 3. NCF Fan Sound Enclosures The Sound Enclosures are designed for indoor and outdoor use and include fan, connections, vibration absorbers etc. For further information please contact your local Nederman sales representative. Also see the Nederman Design & Enginering Guide and www. nederman.com 48

49 Nederman N series Fans The N series fan is an important component in Nederman s wide range of quality products for fume extraction and filtering, as well as for vehicle exhaust extraction. A range of fans is available from 0.55 kw to 2.2 kw (0.75 Hp to 3 Hp), both single and three phase. Simple and powerful Dimensions Fan A B C D N10/N N N N (mm) Pressure drop B C ØD A X: airflow m³/h Y: static pressure Pa Model Airflow, m³/h Voltage, V Frequency, Hz Phase Rated current, A Power, kw Connection Ø in / out, mm Weight, kg N10* / / / N10* / / / N16* / / / N16* / / / N24* / / / N24* / / / N40* / / / N40*** / / / N29** / / / N29* / / / N29** / / / *) Excluding fan bracket **) Including fan bracket ***) Excluding fan bracket, can not be used without connections, max. airflow is 2500 m³/h For further information please contact your local Nederman sales representative. Also see the Nederman Design & Enginering Guide and www. nederman.com 49

50 Portable Fans Nederman portable fan is a simple and powerful ventilation unit for service, repair and other temporary work. Ideal as an extractor for welding fumes, steam, dust or for providing fresh air during work in confined and enclosed spaces. A compact and easy to use fan which, in combination with inlet and outlet connections, makes a flexible and versatile unit with a wide range of applications. Compact and easy to use Stand included, wheel set as accessory On/off switch and motor protector included Robust and powerful Dimensions Fan A B D H N Ø N Ø (mm) A D H D B Model * Electric connection Airflow, m³/h Voltage, V Frequency, Hz Phase Rated current, A Power, kw Connection Ø in/out, mm N16 1 CEE 7/2 P+E 230 V / / / N16 2 CEE 17/2 P+E 100 V / / / N16 3 CEE 17/2 P+E 230 V / / / N24 1 CEE 7/2 P+E 230V / / / N24 2 CEE 17/2 P+E 100 V / / / N24 3 CEE 17/2 P+E 230 V / / / * Electric connections Weight, kg Accessories Hose and nozzle kit for N16/N24 portable fans Wheel set for N16 or N24 portable fan Nederman also offers Fan Inverters and large capacity NCF fans. For information about these products, please see the Nederman Design Guide, or visit or contact your nearest Nederman dealer. 50

51 Fan Manual Starter A series of Fan Starters suitable for N-Series, smaller NCF-Series Fans and NOM Filters. Lockable on/off switch Motor overload protector included Both for single and three phase fans Model Rated current, A 1 phase 1 phase 3 phase 3 phase 110V 230V 230V 400V FMS N10, N16, NOM FMS N10, N16, NOM4 N24, NOM11, NOM FMS NOM4 N24, NOM11 N29/N40-1.5kW FMS NOM4 N10, N16, NOM11 N29/N40-1.5kW, NOM18 N29/N40-2.2kW, NCF30/15, NOM FMS N10, N16, NOM11 N24, NOM18 N29/N40-2.2kW, NCF30/15, NOM28 NCF30/ FMS N24, NOM18 NCF30/25 (NCF40/25) FMS FMS Fan contactor To start/stop a central fan in combination with a number of Motor Dampers. (Larger capacity fans may be remote controlled via a Nederman Fan Starter or Fan Inverter.) The Fan Contactor has a fan motor protection included. Protection class IP66. Coil 24V AC, from Operation Box or transformer. Model Rated current, A Phase 110V 230V 400V FC 3/ N10, N16 N10, N16, N FC 3/ N24 N FCA 3/ N40 N kw, N kw, NCF30/15, NCF30/ FCA 1/ N10, N16, N FCA 1/ N10, N

52 Fan Controls Less heated air is extracted to outside, and less electricity consumed if the fan operates only while the work is in progress. Switch on/off the fan manually at the hood, or automatically with a sensor clamp. Single phase power supply of the Operation Box. The automatic Fan Control has a sensor clamp to be attached on the ground cable of the welding set for automatic start of the fan. It is able to detect currents from 8A. The Operation Box consists of a transformer 30VA for the light kit in the extraction arm, a timer for delay of fan stop variable 0-5 minutes, and two separate connections for sensor clamps. Manual Model Rated current, A Phase 110V 230V 400V FCM 3/ N10, N16 N10, N16, N FCM 3/ N24 N24, N29, N40, NCF 30/ FCM 3/ N40 N kw, N kw, NCF 30/15, NCF 30/ FCM 1/ N10, N16, N FCM 1/ N10, N16, N Automatic Model Rated current, A Phase 110V 230V 400V FCA 3/ N10, N16 N10, N16, N FCA 3/ N24 N24, N29, N40, NCF 30/ FCA 3/ N40 N kw, N kw, NCF30/15, NCF30/ FCA 1/ N10, N16, N FCA 1/ N10, N16, N Accessory Sensor clamp. One additional sensor clamp can be connected to the operation box. Used when using two different welding machines in the same area

53 Motor Damper The Motor Damper consists of a Fan Contactor and an Operation Box that can be controlled by any closing contact. The Operation Box consists of a transformer 30VA for the light kit in the extraction arm, a timer for delay of fan stop variable 0-5 minutes, and two separate connections for sensor clamps. Single phase power supply, 110/ /240V, 50/60Hz. The Motor Damper is available in two models: manual, using a hood mounted switch set, or automatic, using a sensor clamp on the welding set, for automatic start of the fan and automatic control of the damper. Provides optimum airflow within a multi-arm system Reduces energy consumption and increases efficiency Makes it possible to use a smaller fan and automatic start/stop Manual Model Ø, mm MDM MDM MDM Automatic Model Ø, mm MDA MDA MDA Accessory Sensor clamp. One additional sensor clamp can be connected to the operation box. Used when using two different welding machines in the same area Transformers 1 2 Description Input voltage, V Input frequency, Hz Input phase Output No. of light kits Part no 1 Power supply to spotlight kits 24V 230/250 50/ V 35VA 1x20W Power supply to spotlight kits 24V 230/250 50/ V 75VA 3x20W

54 Accessories for Fans Description 1 Adaptor Ø125/Ø100 mm Adaptor Ø125/Ø75 mm Adaptor int. Ø160/ext. Ø75 mm Adaptor int. Ø160/ext. Ø100 mm Adaptor int. Ø160/ext. Ø125 mm Adaptor Ø150/Ø125 mm Adaptor Ø160/Ø150 mm Inlet adaptor for hose Ø160 mm for fan N10/N16/N Inlet adaptor for hose Ø160 mm and two guard nets for fan N10/N16/N Guard net, 1 pc, for fan N10/N16/N Hose. L = 5 m. Ø100 mm. PVC. Black Hose. L = 5 m. Ø125 mm. PVC. Black Hose. L = 5 m. Ø150 mm. PVC. Black Hose. L = 5 m. Ø160 mm. PVC. Black Jointing tube 3-3 (75 mm) Jointing tube 4-4 (100 mm) Jointing tube 5-5 (125 mm) Jointing tube 6-6 (150 mm) Jointing tube Ø160-Ø160 mm Nozzle with magnet. 250 x 30 mm. Aluminium. Ø100 mm Nozzle with magnet. 260 x 100 mm. Polycarbonate. Ø100 mm Silencer for fan when mounting on Original/Telescopic Silencer including quick release (for fan mounting on Filterbox) Wallbracket for silencer Split intake Ø125 int./2 x Ø100 mm ext Split intake Ø125 int./2 x Ø125 mm ext Split intake Ø125 int./2 x Ø75 mm ext Split intake Ø160 int./2 x Ø100 mm ext Split intake Ø160 int./2 x Ø125 mm ext Split intake Ø160 int./2 x Ø75mm ext Support bracket for N10/N16/N24 for fixed mounting Support bracket for N40 for fixed mounting Support bracket for portable N16/N24 fan Support bracket for fan N

55 Central Filter Systems The filters presented in this catalogue cover the needs for single or few workplaces. For larger systems and higher capacities we recommend our FilterMax series. The FilterMax System Filter Max is a modular filter system designed to deal with all types of fume and dust from mechanical working or handling of a wide range of materials. New modular sections can easily be added when the airflow requirements increase. Filter Max C25 for low volume applications Compact single unit with built-in fan and control equipment. For low volume applications where space is limited. Airflow capacity m 3 /h ( cfm). FilterMax DF for basic use Basic version with one, two or three modules. Airflow capacity m 3 /h ( cfm). FilterMax F with integrated pre-separator Filters with integrated pre-separator for coarse particles, sparks, etc. cartridges. Airflow capacity m 3 /h ( cfm). FilterMax SFC safety and circulation filter Used in combination with FilterMax DF or F models to increase safety against release of dangerous dust into the atmosphere. Can also function as a back-up filter in case of collapse of the primary filter unit. Airflow capacity up to m 3 /h ( cfm). It can also be configured as a spark trap to reduce the risk of fire in a main filter. Nederman FilterMax DX for explosive applications Designed for extraction of dry powder or dust with explosion risk applications or if explosion protection is demanded accordingly to the ATEX directive. Airflow capacity m 3 /h ( cfm). Filter Max DF combined with Filter Max SFC General description Low vacuum systems Low vacuum products and systems are generally speaking used for extraction of air contaminated with small, light and low velocity particles. A system briefly consists of a fan and filter unit. Typical low vacuum applications are: engineering processes with welding grinding and oil mist recycling food and pharmaceutical processes involving the handling of powders or chemicals. In these applications there is often a latent explosion risk. Specially adapted products designed according to the ATEX standards are obligatory. Low vacuum system characteristics: uses high volumes of air, m³/h ( cfm) in each extraction point extraction via large diameter ducting at relatively low speeds, around m/s ( ft/min.) the pressure drops that have to be overcome are low, normally in the region of 1 3 kpa For further information please contact your local Nederman sales representative. Also see the Nederman Design & Enginering Guide and

56 Nederman has extensive experience from more than 1,000 oil mist installations in workshops and plants all over the world. Our wide range of solutions covers all types of workshop machinery, from conventional machines to the latest high-speed CNC equipment. Central Oil Mist Filter Systems The Nederman oil mist filters NOM are designed for use in conjunction with machining work where emulsions are used as the coolant/lubricant. They can also be used in the metalworking press industry. The NOM 4 presented in this catalogue is designed for recovery of oil mist from single CNC machines with enclosed cabinet. NOM filter for larger airflow capacities and central systems Beside NOM 4 Nederman offers a range of NOM filters designed to cover applications with need for larger airflow capacities (up to 11,200 m 3 /h) (6,600 cfm). NOM 11, NOM 18, NOM 28 and NOM 112 are installed in central systems connected to many machines. For further information please contact your local Nederman sales representative. Also see the Nederman Design & Enginering Guide and

57 Fume Eliminator 840/841 Fume Eliminator 840/841 is a small, lightweight, portable extraction unit designed to be carried to the working area. Connected to a welding torch or to an extraction nozzle, the FE 840/841 unit extracts the fume directly at source. FE 840 has a manual start/stop function. FE841 has an automatic start/stop function which starts the unit as soon as the welding begins. It also includes an indicator for filter exchange. Portable, easy to carry Low service costs FE 840 Manual start/stop FE 840 Manual start/stop FE 840 Manual start/stop FE841 Auto start/stop FE841 Auto start/stop FE 841 Auto start/stop Voltage, V / electrical plug Power, W Airflow with 2.5 m hose, m 3 /h Filtration efficiency Max. vacuum, kpa % Noise level, db(a) Length, mm Width, mm Height, mm Weight, kg 230/EUR /UK /UK /EUR /UK /UK Accessories Nozzle TM 80, length 500 mm, Ø80 mm Nozzle TM 200, length 570 mm, slot width 200 mm, slot height 30 mm Nozzle PM 300, slot width 300 mm, slot height 5 mm Hose, Ø45 mm, 5 metres Hose, Ø45 mm, 15 metres

58 MFS Modular Filter System MFS offers maximum flexibility through its unique modular concept of standard mounting and filter elements. Virtually any combination can be achieved, from a single filter assembly, to larger multi-stage filter systems combining particle, HEPA and Gas. For filtration of both particles and gases, place the particle filter before the gas filter. To increase the total airflow capacity place further filter assemblies in parallel. Applications: TIG and spot welding, laboratory extraction, food ingredients and odours, chemical handling etc. Few parts - easy installation Modular design - easy to expand the filter capacity Particle, HEPA and gas filters can be combined 160 Ø Ø Ø (mm) Installation example Particle filter Carbon filter 58

59 MFS with Particle filter MFS with Micro / HEPA filter MFS with Gas / Carbon filter For welding smoke, dust and large particles. A complete filter unit includes filter cartridge, console and two connections. For ultra fine and contaminating particles. A complete filter unit includes filter cartridge, console and two connections. Absorbs smells, gases, smoke and organic solvents (toluene and methylethylketone). A complete filter unit includes filter cartridge, console and two connections. Pressure Drop Pressure Drop Pressure Drop Filter surface 18 m 2 Filtration degree 99 %* Weight Material cylinder Material filter media 8.8 kg Cellulose paper Cellulose paper, BIA Category M Filter surface 14 m 2 Filtration efficiency 99,95 % * Weight 6.4 kg Material Cylinder Cellulose paper Material Filter media Micro fibreglass *) acc. to EN 1822, H Weight total Weight filtration media Material Cylinder Material Filter media 21 kg 15 kg Cellulose paper Activated carbon The flow of air should not exceed 500 m 3 /h per filter unit. The lower the flow of air, the better the filtration ability/ absorption. Replacement filter Part no Particle filter without console Micro / HEPA filter without console Gas filter without console Accessory Console for MFS Kit consists of Original arm 2 m + MFS filter unit with Particle filter (incl bracket) + fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kw + Fan Manual Starter Original arm 4 m horizontal + MFS filter unit with Particle filter (incl bracket) + fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kw + Fan Manual Starter

60 FilterCart Mobile Extraction/Filter Units FilterCart Original FilterCart Original mobile filter unit for light welding and extraction applications. FilterCart Original includes Extraction Arm Original with an integrated spotlight, which optimizes the user-friendly design. If a larger working range is needed, the 3 m (10 ft.) long arm is recommended. 240 (9.5) min. 730 (29) Ø 160 (6 1/4) 1410 (55.5) 2 m arm: max 1650 (65) 3 m arm: max 2050 (81) 1145 (45) max. 2000/3000 (84/120) 770 (30) mm (inch) Horizontally swivelling arm Arm length m Arm Ø, mm Max. airflow, m 3 /h Filter efficiency, % Filter area, m 2 Voltage, V/ electrical plug Power, kw Frequency, Hz Phase Noise level, db(a) /EUR /UK /UK /EUR /UK /UK Weight, kg Accessories HEPA filter H13, 7.5 m 2 high efficiency final filter, class H Spark protection, for mounting in the hood. To reduce risk of fire Replacement filter 35 m 2 flame retardant pleated cellulose material. = 99% efficiency for welding fume. Measured according to the test procedures in EN

61 FilterCart W3 FilterCart W3 mobile filter unit for extraction in light production applications is state of the art with all possible features. Includes a warning signal when the filter is full. The W3 model fulfills the legislations W3 from BGIA. The specially designed metal hood with integrated spotlight creates maximum air velocity at the welding spot. 240 (9.5) min.685(27) max. 2000/3000 (84/120) Ø 350 (13.8) 1145 (45) 770 (30) 1410 (55.5) 2 m arm: max 1650 (65) 3 m arm: max 2050 (81) mm (inch) Horizontally swivelling arm Arm length, m Arm Ø, mm Max. airflow, m 3 /h Filter efficiency, % Filter area, m 2 Voltage, V/ electrical plug Power, kw Frequency, Hz Phase Noise level, db(a) /EUR /UK /UK /EUR /UK /UK Weight, kg Accessories HEPA filter H13, 7.5 m 2 high efficiency final filter, class H Spark protection, for mounting in the hood. To reduce risk of fire Replacement filter 35 m 2 flame retardant pleated cellulose material. = 99% efficiency for welding fume. Measured according to the test procedures in EN FilterCart Carbon FilterCart Carbon mobile filter unit is specially designed for extraction of odours. FilterCart Carbon includes Extraction Arm Standard and can be equipped with HEPA filter for maximum efficiency. Applications: solvents, fumes and other gas contaminants. 240 (9.5) min.680(27) Ø 340 (13.4) 1410 (55.5) 3 m arm: max 1650 (65) max (84) 1145 (45) 770 (30) mm (inch) Horizontally swivelling arm Arm length, m Arm Ø, mm Max. airflow, m 3 /h Filter efficiency, % Filter Voltage, V/ electrical plug Power, kw Frequency, Hz Phase Noise level, db(a) kg activated carbon 230/EUR kg activated carbon 240/UK kg activated carbon 110/UK Weight, kg Accessory HEPA filter H13, 7.5 m 2 high efficiency final filter, class H Replacement filter 20 kg activated antracite carbon for general use

62 FilterBox Modular Extraction/Filter System FilterBox is a system that solves most common demands regarding extraction of welding fumes and dust. It can be combined to work as a single mobile unit or as a fixed modular unit with expandable capacity. Filter cleaning is manual, semi-automatic or fully automatic (compressed air cleaning) depending on model. Special model for food, medical or chemical industry. All features below apply to the standard model. Accessories can be attached to improve individual applications - see next page. Complete mobile FilterBox unit with Extraction Arm Original. Mobile units or fixed wall/floor installations Complete kits or modules for customization Manual, semi-automatic or fully automatic filter cleaning Pressure Drop Description Noise level, db(a) FilterBox with silencer, 3 m arm, fan N24 61 FilterBox with silencer, 3 m arm, fan N29 68 FilterBox without silencer, 3 m arm, fan N24 72 FilterBox without silencer, 3 m arm, fan N (30) 700(28)** 150/160 (6/6¼) dia (61.5) 800 (31.5) 150/160 (6/6¼) dia (42) 1270 (50) 575 (22.6) 2000 (79)* 525 (20.1) 310 (12.2) dia. The pressure drop across the FilterBox varies with air flow and dust load. Maintaining a certain average airflow with increasing dust load requires a shorter interval between cleaning. 1) heavy load 2) light load, welding 3) light load, dust 4) clean filter cartridge Grey areas describe average operating range 1255 (49.5) mm (inch) *) Recommended mounting height from floor. **) Minimum distance from wall to achieve filter cartridge change. Manual filter cleaning. 625 (24.6) Complete kits, for fixed or mobile installation Type of kit Kit consists of Weight, kg Wall mounted Basic Filter Standard PW13 + Original arm 3 m + Fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kw. Note! Silencer not included! Wall mounted Standard Filter Standard PW13, 3-phase, 400 V + Original arm 3 m + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kw + Silencer Wall mounted Monitor Filter Standard PW13, 3-phase, 400 V + Original arm 3 m (incl light) + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kw + Silencer Floor mounted Basic Filter Standard PW13 + Original arm 3 m + Fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kw. Note! Silencer not included! Floor mounted Standard Filter Standard PW13, 3-phase, 400 V + Original arm 3 m + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kw + Silencer Floor mounted Monitor Filter Standard PW13, 3-phase, 400 V + Original arm 3 m + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kw + Silencer Mobile unit Basic Filter Standard PW13 + Original arm 3 m + Fan N24, 3 phase, 230/400V, 50 Hz, 0.9 kw. Note! Silencer not included! Mobile unit Standard Filter Standard PW13, 3-phase, 400 V + Original arm 3 m (incl light) + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kw + Silencer Mobile unit Monitor Filter Standard PW13, 3-phase, 400 V + Original arm 3 m (incl light) + Fan N29, 3-phase, 230/400 V, 50 Hz, 2.2 kw + Silencer

63 FilterBox Basic FilterBox Monitor FilterBox Basic Filter cartridge Weight, kg PW13 65 PW13 (space blue) FilterBox Monitor Filter cartridge No filter PW13 Manual filter cleaning by a hand crank. For simple welding and dust applications with no need for automatics. Note! When connected to a fan, a separate starter must be added. Fully automatic mechanical filter cleaning, normally combined with compressed air cleaning. For heavy welding applications. Filter cleaning Motor + Compr. air Spaceblue Phase* Motor + Compr. air 3 Weight, kg FilterBox Standard Filter cartridge Filter cleaning No filter Motor PW13 Motor PW13 FilterBox Standard Voltage, V Motor Motor + Compr. air PWHE15 Motor + Compr. air Motor PW13 PW13 Phase* Motor PW13 PW13 Voltage, V Motor + Compr. air Weight, kg Spaceblue Filter cartridge PW13 Filter cleaning Voltage, V Phase* Motor Motor PW13 Semi-automatic filter cleaning manually initiated. Can be combined with compressed air cleaning. For welding and dust applications. The FilterBox unit is also available in space blue for food and chemical applications. PW13 PWHE15 (antistatic) Motor Motor + Compr. air Weight, kg *) Motor protector included. Combination Possibilities Accessories Fan N29 for heavy duty and long duct systems, m3/h, 2.2 kw, / V, 3-phase, 50Hz Fan N24 for light dust, m3/h, 0.75 kw, / V, 1-phase, 50Hz Fan N24 for light dust, m3/h, 0.9 kw, / V, 3-phase, 50Hz Silencer, blue Floor stand for FilterBox with fan Extractor arm, max length for arm on mobile unit: 3 m. (See separate brochures for Original Arm, NEX MD, and NEX HD) Silencer, space blue Floor stand for FilterBox connected to central fan Trolley Bracket for wall mounting box with fan Additional bracket for mounting fan N24 on the FilterBox Cable set, 220/240V, 1 phase Cable set, 110V, 1 phase Cable set, 3 phase Compressed air cleaning, 4-6 bar Replacement filter PW13 PW HE15 PWA HE15 Use for Welding Dust, stainless steel welding Dust (antistatic) Efficiency, % Area, m Part no

64 NOM 4 Oil Mist Filter NOM 4 is an oil mist filter in compact design and therefore suitable for enclosed cabinet single CNC machines. The unit is easy to install and enables cartridges maximum flexibility in the workshop, since it is normally installed on top of the machine. The NOM 4 is suitable for emulsions and neat oil and complies with PM10. Superior filtration efficiency Low maintenance cost Self cleaning filter 573 (22.5) Ø 526 (20.75) 232 (9.1) 696 (27.5) 198,5 (7.8) Ø 9 (0.35) X4 Ø 160 (6.3) Model Max airflow, m 3 /h Main filter area, m 2 HEPA filter area, m 2 Fan Voltage, V Phase Power, kw Rated current, A NOM no yes NOM yes NOM no yes 400/ / NOM yes 400/ / Motor Damper and Fan Starters - see separate sections. Accessories 1 Drip collector Machinery stand, including damper Wall bracket Pressure gauge kit, measures the pressure drop over the filter cartridges Replacement filters Main filter, 3m HEPA-filter, 5.5m Nederman also offers filters for applications with need for larger airflow capacities NOM 11, NOM 18, NOM 28 and NOM 112. For information about Nederman s larger oil mist filters, please see the Nederman Design Guide, or visit or contact your nearest Nederman dealer. 64

65 Central High Vacuum and Filter Systems for On-torch welding, Grinding/Sanding and Industrial cleaning/housekeeping Nederman High Vacuum System is a multi-functional solution offering improved working conditions and reduced load on the environment. The system provides overall vacuum power in operations such as capturing of fumes from on-torch welding, extraction of dust from grinding, sanding and cutting, collection of scraps from process lines, general housekeeping etc. This makes a central systems very versatile and cost-effective. The system, placed in a separate room, offers quiet operation at the workplaces. Continuous around the clock operation and minimum maintenance means optimal production uptime. Nederman offers complete customized systems including vacuum and filtration units, containers, and a complete selection of tube, bends, fittings and inlets. On torch-welding Cutting, grinding, sanding Industrial Cleaning Extraction & filtering On-torch Welding Fume Extraction Welding torches with integrated extraction provide efficient and safe extraction of welding fumes directly at the source. On-tool Extraction On-tool extraction is the most efficient way to capture dust and particles. Nederman offers a wide range of on-tool extraction kits for more than 600 tools for cutting, grinding, sanding etc. Collection of scraps Housekeeping The system keeps premises and machines clean and free from dust, chips and metal particles. A separator prevents liquids and objects from going into the piping system and reclaims material e.g swarfs, for recycling. High Vacuum and Filter Units The central high vacuum and filter units clean the air before being released into the atmosphere or your premises. We offer a range of powerful high vacuum and filter units For further information please contact your local Nederman sales representative. Also see the Nederman Design & Enginering Guide and

66 Central High Vacuum Unit Nederman L-PAK The Nederman L-PAK unit offers highly effective solutions for removing dust and fumes in all types of industries. The compact design makes it easy to place the stationary unit into a restricted work space. The two stage separation filter with automatic filter cleaning by reverse air-pulse operates with continuous maximum efficiency. Low running and maintenance costs Easy to install and low operating noise level Wide range of applications Stationary High Vacuum Unit L-PAK. Robust and durable compact design for any factory or workshop. L-PAK Kits L-PAK kits include bends, pipe couplers, compressed air filters and junction box. Unit Voltage, V Frequency, Hz Connection Ø, mm Power, kw Capacity free blowing, m 3 /h Capacity at -15 kpa, m 3 /h Max. vacuum, kpa Filter surface, m 2 Filter life Noise level (expected), h ISO, db(a) Noise level ISO with silencer hood, db(a) L-PAK Weight, kg L-PAK Filtration according to BGIA category, U.S. Piping accessories Installation kits Installation kits Part no Connection Ø 63 mm Part no Connection Ø 100 mm TAV 50 FV Valve for pneumatic tools with Micro switch. Opens automatically when a connected tool is started. TAV 50 MA Manual valve with Micro switch for start/ stop KV 50 CL Flap valve with Micro switch for start / stop Pipe 6 m Piping accessories High vacuum valve Accessories Silencer hood for L-PAK 150 and 250 to reduce noise level Replacement filters Type For L-PAK 150 PP 1.1 m For L-PAK 250 PP 1.6 m For L-PAK 250 PTFE 1.6 m For L-PAK 250 Anti-static 1.6 m Accessories: see end of chapter 66

67 Mobile Pre-Separator FA 7 The Nederman FA7 unit separates liquids and objects to prevent them from going into a stationary piping system. The FA7 pre-separator is idealic for vehicle repair shops, metal fabrication industries and wherever scraps of glass, metal and other coarse materials need to be removed. FA7 is also suitable for picking up water and cutting fluids. Captures coarse materials preventing clogs in the piping system Less wear on piping system Cyclone inlet for efficient pre-separation Dustbin volume, l Capacity, m 3 /h Inlet Outlet Weight kg female Ø50 mm (KV50) male Ø50 / Ø100 mm Ab450 - Coarse dust suction Single container system for fixed installation. Powerful vacuum unit suitable for recovery of liquids, dust and granulated material. Equipped with NVF filter, automatically cleaned at each system stop. Cyclonic discharge of the material into a container of 47 litres (12 gallons). Can be supplied with antistatic or conductive parts to avoid sparks from static electrical discharge. The unit is efficient for collecting greasy chips from lathes and drilling machines in a central suction system. Efficient vacuum unit requiring minimal installation area Efficient and self-cleaning NVF filter system High suction capacity 67

68 On-tool Extraction Kits Nederman offers a range of high vacuum on-tool extraction kits for more than six hundred electric and pneumatic tools for cutting, grinding and sanding. The kits can be connected to both mobile vacuum units and stationary systems. The kits are available for the following brands of tools: ATA George Renault Nitto Atlas Copco Gison NPK Bahco Hilti Pferd Bosch Hitachi Protool Chicago Pneumatic Ingersoll Rand PUMA Desoutter Jonnesway Rodac Deprag JET Rodcraft Dewalt Kress Rupes Dynabrade Lefa Sioux Fein Lindova Shinano Festo Makita Suhner Fiam Metabo Uryu Flex Milwaukee Walter Fuji Müller Grasso Nike For further information please contact your local Nederman sales representative. Also see the Nederman Design & Enginering Guide and

69 Extraction Nozzles for High Vacuum Systems Extraction nozzles for high vacuum systems. All nozzles can be connected to a balance arm, magnet or suction bases. CWN-S with silencer Coated in aluminium with integrated silencer. Noise reduction compared to standard nozzles 9 db(a). 1 2 Model Nozzle Ø, mm Connection Ø, mm 1 CWN-S 105/ CWN-S 105/ CWN-S 105/ CWN-S 105/50L, with flexible steel tube extension. FWN-S fish tail Model Nozzle General purpose nozzle that must be combined with nozzle extension when used with balance arm. Ø, mm Connection Ø, mm 3 FWN 200/ FWN 400/ Accessories for welding nozzles Description 1 Magnetic base suitable for all nozzles. Diameter 100 mm Nozzle extension. Used to extend the nozzle upwards. Fits all welding nozzles. NB! Must be used on FWN nozzles if fitted to balance arms. Height: 100 mm 3 Suction base suitable for all nozzles when working with non-magnetic materials. Diameter 115 mm 4 Handle CWN-S. To be fitted between extraction nozzle and balance arm

70 Vacuum cleaning sets Complete sets which include heavy duty wheel suspended.oor nozzle made from aluminum and chrome steel pipe. The nozzle is delivered with replaceable rubber rims and can also be equipped with bristles. Hose couplers are also included. Model Cleaning equipment description CE mm, Ø 40 mm CE mm, Ø 40 mm CE mm, Ø 50 mm CE370 P 370 mm, Ø 40 mm, plastic floor nozzle Accessories for vacuum cleaning sets Description 1 Pipe brush for O 200 mm pipes, 40 mm male coupler section Pipe brush for O 100 mm pipes, 40 mm male coupler section Plastic crevice nozzle with notches, 40 mm male couple section. 135 x 40 mm Plastic crevice nozzle, 40 mm male coupler section. 100 x 15 mm Circular crevice nozzle in plastic. Inlet can be cut to O mm, 40 mm male coupler section Elonged brush, 400 mm male coupler sectino. 169 x 54 mm Brush blue (hygiene), food industry, 40 mm male coupler section Round rubber brush with swivel top, 40 mm male coupler section Plastic crevice nozzle, 40 mm male coupler section. Length: 360 mm. Width: 45x10 mm Steel crevice nozzle, 40 mm male coupler section. Length: 310 mm. Width: 55 x 15 mm Tapered plastic nozzle for tight spaces, 40 mm male coupler section. Length: 230 mm. Width: Ø mm Tapered rubber nozzle for tight spaces, 40 mm male coupler section. Length: 230 mm. Width: Ø mm Round hand tool with soft brush in conductive plastic, Ø 85 mm. 50 mm male coupler sectino Steel swarf nozzle, Ø 50 mm. Silenced inlet Hose shelf, 10 m, Ø 50 mm Shelf for approx. 10 m O 38 mm hose. Pocket for accessories. Suspending fork for floor cleaning equipment

71 Industrial Hoses Nederman provide a series of flexible and robust plastic and rubber hoses designed for heavy duty industrial usage for various applications. Hose type Application Ø, mm Temperature, C Delivery length, m C-hose Floor cleaning when exceptionally Electrically conductive plastic good conductivity of static hose electricity is required H-hose Floor cleaning equipment Flexible and durable hose Extension hose for on-tool extraction MH-hose Metal chip extraction or heavy Heavy duty rubber hose duty cleaning Larger diameters used for connection of pre-separators FS-hose On-tool extraction with balance Flexible plastic hose with steel arms spiral insert Hose couplers The hose coupler system is available in a wide range to suit most hose diameters commonly used. The couples are made from electrically conductive plastic material and are available in two diameters of the tapered coupler section 40 and 50 mm (1.6 and 2 inch). Using the couplers makes it very easy to connect/disconnect the vacuum hose simply by turning pushing or turning pulling. The male 50 series fits directly to the KV.ap valve and the automatic TAV valve. To connect the 40 series to either the 50 series or to the above mentioned valves an adapter is used. Hose Couplers Ø 40 mm Model Type Hose Ø, mm M40-25P Male M40-32P Male M40-38P Male F40-32P Female F40-38P Female F40-50P Female M40-44A Male (alu.) Hose Couplers Ø 50 mm Model Type Hose Ø, mm M50-38P Male M50-44P Male M50-50P Male F50-50P Female FM40-50P Adapter F50-63S Male (steel) F50-44S Male (steel)

72 Mobile High Vacuum Cleaning Units Electric powered units Electric vacuum units are ideal for demanding cleaning tasks in most types of industries, such as food processing, pharmaceutical, powder coating and foundries. It can also be used in combination with on-tool extraction for small grinders and sanders and for welding fume extraction. The system is effortless to handle thanks to the ergonomic trolley with adjustable handle. The filter is durable with high filtration efficiency. Air powered units Air powered ejector units are used for collecting and transporting dry or wet materials and liquids in industries that work in very tough environments. ATEX approved products The air powered ejector units are also available for use in areas where explosion hazards exist. The ATEX approved products are made of conductive and antistatic material, to comply with the ATEX directive 94/9/EC, and can be used in explosion hazardous category 2 and 3 areas. Model Welding fume P160 I x x x P300 I x x x x Powder Dust Grit Granulate Chips Liquids Misc P30 B x x x x x P30 I x x x x x x P55 I x x x x x x Bb104 x x x x Bb181 Electric powered. Vacuum kpa. Airflow m³/h Electric powered Vacuum kpa. Airflow: m³/h Bb216 x x x x x x Bb306 x x x x Bb515 x x x x Bb680 x x x x x x Air powered Vacuum kpa. Airflow: m³/h Ab105 x x x Ab115 x x Ab216 x x x x x x Ab306 x x x x Ab405 x x x x Ab426 x x x x x Ab450 x x x Ab500 x x x x x Ab510 x x x x Air powered. EX approved Vacuum kpa. Airflow: m³/h Ab105 Ex x x x Ab216 Ex x x x x x x Ab426 Ex x x x x x x Ab500 Ex x x x x x Ab510 Ex x x x x x 72

73 Electric Powered Vacuum Units Unit type Motor power max, W Max. airflow, m 3 /h Max. vacuum, kpa Noise level (ISO 11201), db(a) Cleaning equipm. Auto start/stop P160 I CE370 P For electrical tools P300 I 2x CE370 P For electrical/ pneumatic tools P30 B CE500 Optional (PAS30) P30 I CE450 Optional (PAS30) Compressed air connection Dustbin vol., L Weight, kg Height/ Width/ Depth, mm Filter indicator IP class Filter No 21/ /430/480 No 24 Textile bag filters Yes 32/ /600/580 No 24 Textile bag filters No 32/ /700/880 Yes 55 Fine filter cartridge No 32/ /650/980 No 55 Textile bag filters P55 I CE500 No No 35/ /650/980 No 55 Textile bag filters Voltage, V EUR DK UK UK EUR DK UK UK P160 I A lightweight unit with an optional micro filter for the filtration of very fine particles. P30 B Designed for the professional handling of hazardous dust. The powerful side channel fan gives an outstanding extraction capacity. P55 I Dust extraction by three stage separation cyclone. An optional micro filter for the filtration of very fine particles can be added. P300 I A robust unit with optional suction power twin single phase motors. P30 I The textile filters offer an extra long life of hours with this unit. An optional micro filter for the filtration of very fine particles can be added. Filters for Electric Powered Units Filters P160 P300 P30 P55 2 Bag filter pack polypropylene x Cartridge filter x Micro filter cartridge x Bag filter pack polypropylene x Micro filter cartridge x Bag filter pack polypropylene x Micro filter cartridge x Micro filter cartridge x Bag filter pack polypropylene x Cartridge filter x x x Textile filter bag x x x Plastic bin liner x Plastic bin liner x x x

74 Electric Powered Vacuum Units Bb104 Bb181 Bb216 Bb306 Bb515 Bb680 Part no: Max. vacuum mmwc Max. airflow Nm 3 /hr Voltage V /400 Power kw Power phase Single Single Single Single Single Three Power frequency Hz Classification IP44 IP44 IP44 IP44 IP44 IP54 Starting method Direct Direct Direct Direct Direct Man. Y/D Noise level * db(a) Simultaneous operators: Container practical volume: litres Length x Width x Height: mm 1140 x 550 x x 550 x x 530 x x 550 x x 730 x x 590 x 1650 Weight: kg Standard suction hose diameter: mm / 63 / 76 Standard suction hose length: m Standard suction hose quality: PE PE PE PVC PVC - Main filter area: m Main filter approval category: ** - - M M - M Main filter type: Bag - Cartridge Cartridge Bag Cartridge Main filter material: PTFE coated polyester - Paper Paper PTFE coated polyester Paper Main filter cleaning method: Manual - Reverse air jet Manual Manual Reverse air jet Control filter area: m Control filter approval category: - - H - - M Control filter type: - - Cartridge - - Cartridge Control filter material: - - Microfibre - - Paper Control filter cleaning method: - - Manual - - Manual * Noise level - measured at a dist. 1 m (3 ft.), height 1.6 m (5.25 ft.) ** Approval category - EN NOTE: Since Norclean is part of the Nederman Group, all models are now in the blue corporate colour (except stainless steel units). If the earlier Norclean colour (orange) is requested, it will available for a transitional period of time. Bb104 Workshop cleaning Bb181 Liquid transportation Bb216 Multi purpose suction Versatile single container system. Simple, robust and easy to handle. For the collection of dry materials over short distances. Robust system. Pump 500W max. capacity: 8 m³/h (4.7 crm), max.discharge height: 8000 mmwc (315 in w.g.). Efficient suction of liquids and simultaneous transportation into tanks, etc. High suction capacity, cyclonic pre-separation. Single container system. Double HEPA filter as option. Manual filter cleaning. Larger container as option. Bb306 Multi purpose suction Bb515 Liquid & coarse particle suction Bb680 Multi purpose, fine dust suction Strong and durable suction equipment. Dual container system for liquid recovery and collection of dust, powder, sand, etc. Three separation/ filtration stages. Tippable container. High capacity system with bottom drain valve. For forklift handling and easy tipping into container, onto conveying belts and similar. General cleaning, suction from grinding machines, for powder transportation etc. HEPA/Absolute or washable polyester filter as option. Thermal overload as standard. 74

75 Air Powered Vacuum Units Ab105 Ab115 Ab216 Ab306 Ab405 Ab426 Ab500 Ab510 Part no: Max. vacuum mmwc Max. airflow Nm 3 /hr Compressed air consumption Nm 3 /min Compressed air pressure bar Noise level * db(a) Container practical volume: litres Length x Width x Height: mm 1140 x 550 x x 550 x x 530 x x 550 x x 730 x x 730 x x 850 x 1380 Weight: kg Standard suction hose diameter: mm Standard suction hose length: m Main filter area: m Main filter approval category:** M - H M M Main filter type: Cartridge Bag Cartridge Bag Cartridge Cartridge Bag Bag Main filter material: Paper PTFE coated polyester Microfibre Paper Microfibre PTFE coated polyester PTFE coated polyester Paper 925 x 730 x 1640 PTFE coated polyester Main filter cleaning method: Manual Manual Reverse air jet Manual Manual Reverse air jet Manual Manual Standard suction hose quality: PE IVC PE PVC PVC PVC PVC PVC * Noise level - measured at a dist. 1 m (3 ft.), height 1.6 m (5.25 ft.) ** Approval category - EN Air Powered Vacuum Units, Ex approved Ab105Ex Ab216Ex Ab426Ex Ab500Ex Ab510Ex Part no: Max. vacuum mmwc Max. airflow Nm 3 /hr Compressed air consumption Nm 3 /min Compressed air pressure bar Noise level * db(a) Container practical volume: litres Length x Width x Height: mm 1140 x 550 x x 530 x x 530 x x 730 x x 730 x 1640 Weight: kg Standard suction hose diameter: mm Standard suction hose length: m Main filter area: m Main filter approval category: ** M H H - - Main filter type: Cartridge Cartridge Cartridge Bag Bag Main filter material: Paper Microfibre Microfibre PTFE coated polyester PTFE coated polyester Main filter cleaning method: Manual Reverse air jet Manual Manual Manual Standard suction hose quality: PE PE PVC PVC PVC *Noise level - measured at a dist. 1 m (3 ft.), height 1.6 m (5.25 ft.) **Approval category - EN

76 Ab105/Ab 105 Ex Dust and granules cleaning Ab115 Dust and granules cleaning Simple and robust system with capacity superior to most of the portable electrical vacuums on the market. Disposable dust bag. Can easily be adapted for liquid suction. Ex version with ATEX approval: EX II 2 GD c IIC 60 C (140 F) (T6) High capacity unit for heavy duty work. For suction and transportation of various nonflammable liquids,as well as metal chips, sand, and other granules. Tippable container. Ab216/Ab216 Ex Multi purpose and fine dust suction Ab306 Multi purpose and fine dust suction High capacity system for fine dust. Single container system with HEPA/Absolute filter. Efficient cyclonic pre-separation. Manual filter cleaning. Larger dust container as option. Ex version with ATEX approval: EX II 2 GD c IIC 60 C (140 F) (T6) Dual container system with pre-separator, for collection of liquids, dust, sand, and other fine granules. Contains three separation/filtration stages that ensure optimum cleaning efficiency. Containers are easily tilted when emptying the materials. Ab405 Dry waste suction Ab426/Ab426 Ex Industrial waste and powders Powerful dual container system. With silo and filter container for removal of industrial waste materials. Easy handling of heavy loads. Can be equipped with an adjustable counterweight valve and holder for discharge into sacks. With slots for forklift handling. Powerful system with dual container system. With silo and cyclonic pre-separation. Manual filter cleaning. Handling of heavy loads especially easy. Adjustable counterweight valve for automatic discharge of waste material. Includes slots for forklift handling. EX version with ATEX approval: EX II 2 GD c IIC 60 C (140 F) (T6) Ab500/Ab500 Ex Liquid and coarse particle suction Ab510/Ab510 Ex Liquid and coarse particle suction Single container system. Transportation of material over a long distance possible. High material collection capacity. Optional bottom drain valve for quick and simple discharge of liquids. Ex version with ATEX approval: EX II 2 GD c IIC 60 C (140 F) (T6) High capacity single container system for collection of coarse particles, as well as liquids and sludge. Allows transportation of material over long distances. Optional bottom drain valve for quick and simple discharge of liquids. Tippable container. With slots for forklift handling. Ex version with ATEX approval: EX II 2 GD c IIC 60 C (140 F) (T6) 76

77 Suction Blaster 750 Blasting is the simplest and most effective way to remove corrosion, old paint and any other foreign matter from many kinds of surfaces. The Nederman Suction Blaster is a clean, dust free sand blaster that leaves the surface cleaned and well prepared for auto bodywork filling and painting etc. The blasting material is recycled in this closed system and is reused many times over. Recycling of blasting material gives lower costs Built-in filter for minimum airborne dust reducing workshop cleaning The closed blasting process ensures no obstruction to other workshop activities Type Voltage, V Suction Blaster EUR Suction Blaster UK Designed for easy manœuvring and use. The blasting material is retained by the filter and recycled, keeping the air clean. Nozzles for Suction Blaster Nozzle type Description Part no 1 Nozzle for spot areas Nozzle for edges Brush nozzle (included in Suction Blaster 750) Nozzle for interior corners Nozzle for exterior corners

78 Nederman Hose and Cable Reels Nederman offers a complete range of hose and cable reels, all of which are simple to operate and safe to use. All our reels are fitted with ball bearings in the drum and/or the swivel shaft, which makes it very easy to pull out the hose or cable. High quality seals minimize any risk of leakage. All our reels have an optimized spring force, ensuring that the hose or cable retracts smoothly and evenly onto the drum. The high quality spring is pre-tensioned at the factory to suit a wide range of applications, and is well protected inside the drum cavity. Our reels are very easy to mount, either on walls, ceilings or floors. To improve ergonomics the hose and cable reels can be combined with a balancer, see chapter Ergonomy and Protection. Selection Guide Media Max. working pressure MPa (psi) Hose dimension Int. Ø mm (in) Maximum hose length, m Series H20 Maximum hose length, m Series H30 Maximum hose length, m Series 883 Maximum hose length, m Series 893 Maximum hose length, m Series 888/889 Maximum hose length, m Series 884 Maximum hose length, m Series 876 Air 1.2 (175) 6 (1/4) 12 Air 1.2 (175) 8 (5/16) 8 Air/Water 1.5 (220) 8 (5/16) 12 Air/Water 1.5 (220) 10 (3/8) / 20 Air/Water 1.5 (220) 12.5 (1/2) / Air/Water 1.5 (220) 19 (3/4) 15 Air/Water 1.5 (220) 25 (1) 10 Water food 2.0 (290) 12.5 (1/2) / grade hose Water food 2.0 (290) 19 (3/4) 15 grade hose Water food 2.0 (290) 25 (1) 10 grade hose HP water 25 (3625) 10 (3/8) / Oil 5.0 (725) 19 (3/4) 15 Oil 5.0 (725) 25 (1) 10 Oil 7.5 (1090) 12.5 (1/2) / Grease 35 (5075) 6 (1/4) / 25 Oxygen and 2.0 (290) 2 x 6.3 (1/4) 20 Acetylene Oxygen and 2.0 (290) 2 x 10 (3/8) 15 Acetylene Oxygen and 2.0 (290) 1 x 6.3 (1/4) 15 Acetylene + 1 x 10 (3/8) Oxygen and LPG 2.0 (290) 2 x 10 (3/8) 15 For more information see pages

79 Selection Guide - Anti-corrosion and Stainless Steel Hose Reels Use for Max. working pressure MPa (psi) Hose dimension, Int. Ø mm (in) Anti-corrosion, Series 893, Max. hose length, m Anti-corrosion, Series 888/889, Max. hose length, m Stainless Steel, Series 893, Max. hose length, m Stainless Steel, Series 888/889, Max. hose length, m Stainless Steel, Series 886, Max. hose length, m Water 10 (1450) 12.5 (1/2) / Water food 2.0 (290) 12.5 (1/2) / grade hose Water food 2.0 (290) 19 (3/4) 18 grade hose Water food 2.0 (290) 25 (1) 10 grade hose HP water 25 (3625) 10 (3/8) / / For more information see pages EX approved Hose Reels Designed to use in Ex zones and where high hygiene and corrosion resistance is required. Available with or without hoses. Use for Max. working pressure MPa (psi) Hose dimension, Int. Ø mm (in) Series 889, Max. hose length, m Series 886, Max. hose length, m Air/Water 2.0 (290) 12.5 (1/2) Air/Water 2.0 (290) 19 (3/4) - 15 For more information see page 92 Hose Reels for vacuum Cable Reels for power Max. suction, kpa (psi) Int. Ø, mm (in) Hose dimensions Length, m 45 (7) 38 (1 ½) (7) 50 (2) 10 Series C20 Series 793 Series C30 1 phase 3 phase Cable length, m /25 15/22 Ideal for handling and storing vacuum hoses in cleaning applications. Available with or without hoses. Series 20 & 30 for 230 V/2300 W. Series 793 for 230 V/3800 W, (1 phase), or 400 V/6900 W, (3 phase). For more information see page 93 For more information see pages

80 Hose Reel Series H20 Safe and functional hose reels for industrial use, professional tradesmen or do-it-yourself workshops. Robust design in high impact composite materials. Supplied with an easily mounted snap-on, pivoting wall bracket and a unique safety latch for safe and easy service. Equally suitable for pneumatic tools, staplers and blow guns. Snap-on wall brackets Unique safety latch Drum with ball bearings on both sides Pressed fitting and steel spiral hose protector Hose easily replaced 350 (14) 170 (6.7) 220 (8.7) 315 (12.5) Ø 8.5 (0.33) Use for Max. working pressure MPa (psi) Material recycling: 100 % Distribution hose Int. Ø mm (in) Distribution hose Length, m Connection hose Int. Ø mm (in) Connection hose Length, m Hose fittings, distribution hose Air 1.2 (175) 6 (1/4) (3/8) 1 Male 1/4 BSP ~ Air 1.2 (175) 8 (5/16) 8 10 (3/8) 1 Male 1/4 BSP ~ Weight, kg Accessories: see end of chapter 80

81 Ø 8.5 (0.33) Hose Reel Series H30 Safe and functional hose reels for industrial use, professional tradesmen or do-it-yourself workshops. Robust design in high impact composite materials. Supplied with an easily mounted snap-on, pivoting wall bracket and a unique safety latch for safe and easy service. Equally suitable for pneumatic tools, staplers and blow guns. Snap-on wall brackets Unique safety latch Drum with ball bearings on both sides Pressed fitting and steel spiral hose protector Hose easily replaced 400 (15.75) 180 (7) 275 (10) 375 (14.75) Use for Max. working pressure MPa (psi) Max. recommended water temp. +40 C. Material recycling: 100 % Distribution hose, Int. Ø mm (in) Distribution hose, Length, m Connection hose, Int. Ø mm (in) Connection hose, Length, m Hose fittings, distribution hose Air/Water 1.5 (220) 8 (5/16) (3/8) 1 Male 1/4 BSP ~ Air/Water 1.5 (220) 10 (3/8) Male 3/8 BSP ~ Weight, kg 81

82 490 (19.5) 140 (5.5) Hose Reel Series 883 A fully encased and robust, medium sized hose reel. Highly suitable for applications in vehicle repair and maintenance workshops. Spring tension easily adjustable from the outside Fast and easy to service Simple hose replacement without dismantling the reel 220 (8.7) 11 (0.43) 226 (9) 470 (18.5) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Air/ Water 1.5 (220) 10 (3/8) (1/2) 1 Rubber B Air/ Water 1.5 (220) 12.5 (1/2) (1/2) 1 Rubber B HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Oil 7.5 (1090) 12.5 (1/2) (1/2) 1 Rubber I Grease 35 (5075) 6 (1/4) 15 6 (1/4) 1 Rubber J Material recycling: 100 % 82

83 Hose Reel Series 888/889 A reliable, medium sized hose reel for safe and maintenancefree operation. Outlet roller position can be adjusted through 120 for optimal pull-out angle Spring tension is easily adjusted Latch function is easily disengaged Series 888: 426 (16.75) Series 889: 476 (18.75) 157 (6.2) ~200 (~8) Ø13 (0.51) 125 (4.9) Series 888: 560 (22) Series 889: 590 (23.2) Use for Max. working pressure, MPa (psi) Distribution hose Int. Ø, mm (in) Distribution hose Length, m Connection hose Int. Ø, mm (in) Connection hose Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Air/Water 1.5 (220) 10 (3/8) (1/2) 1 Rubber B Air/Water 1.5 (220) 10 (3/8) (1/2) 1 Rubber B Air/Water 1.5 (220) 12.5 (1/2) (1/2) 1 Rubber B Air/Water 1.5 (220) 12.5 (1/2) (1/2) 1 Rubber B Water food grade hose 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E Water food grade hose 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Oil 7.5 (1090) 12.5 (1/2) (1/2) 1 Rubber I Oil 7.5 (1090) 12.5 (1/2) (1/2) 1 Rubber I Grease 35 (5075) 6 (1/4) 15 6 (1/4) 1 Rubber J Materal recycling: 100 % Accessories: see end of chapter 83

84 Hose Reel Series 893 A medium sized hose reel with open design. Versatile and easy to mount in industrial and workshop environments. Open design for easy cleaning and servicing Unique stand design offers mounting flexibility ~200 (~8) 480 (19) 460 (18) 130 (5.1) Ø 9 (0.35) 220 (8.7) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Air/Water 1.5 (220) 10 (3/8) (1/2) 1 Rubber B Air/Water 1.5 (220) 12.5 (1/2) (1/2) 1 Rubber B Water food grade 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E hose HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Oil 7.5 (1090) 12.5 (1/2) (1/2) 1 Rubber I Grease 35 (5075) 6 (1/4) 15 6 (1/4) 1 Rubber J Material recycling: 100 % Accessories: see end of chapter 84

85 760 (30) 110 (4.3) Hose Reel Series 884 Heavy duty hose reel for long and heavy hoses. Made of epoxy coated die cast aluminium. Ball bearings in drum and swivel. Fully protected inner mechanisms. Strong, durable and highly corrosion resistant Smooth hose operation Adjustable outlet arm minimizes friction 280 (11) 13.5 (0.53) 320 (~12.5) 560 (22) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Air/Water 1.5 (220) 12.5 (1/2) (1/2) 1 Rubber D Air/Water 1.5 (220) 12.5 (1/2) (1/2) 1 Rubber D Air/Water 1.5 (220) 19 (3/4) (3/4) 1 Rubber D Air/Water 1.5 (220) 25 (1) (1) 1 Rubber D Water food grade 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E hose Water food grade 2.0 (290) 19 (3/4) (3/4) 1 Rubber E hose Water food grade 2.0 (290) 25 (1) (1) 1 Rubber E hose HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Oil 7.5 (1090) 12.5 (1/2) (1/2) 1 Rubber I Oil 7.5 (1090) 12.5 (1/2) (1/2) Rubber I Oil 5.0 (725) 19 (3/4) (3/4) 1 Rubber I Oil 5.0 (725) 25 (1) (1) 1 Rubber I Diesel* 5.0 (725) Grease 35 (5075) 6 (1/4) 25 6 (1/4) 1 Rubber J Material recycling: 100 % * For 15 m (3/4 ) hose. Connections on reel: male 3/4 BSP Accessories: see end of chapter 85

86 620 (24.5) 125 (4.9) Hose Reel Series 876 The ultimate reel for twin hoses, designed to handle oxygen/ acetylene or oxygen/lpg supplies. This is an application where safety cannot be stressed enough. Single-layer hose feed and storage Open design for safety and easy servicing All-steel construction 157 (6.2) 13 (0.51) 220 (8.7) 620 (24.5) Use for Oxygen and Acetylene Oxygen and Acetylene Oxygen and Acetylene Oxygen and LPG Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose 2.0 (290) 2 x 6.3 (1/4) 20 2 x 6.3 (1/4) 1 K (290) 1 x 6.3 (1/4) + 1 x 10 (3/8) 15 1 x 6.3 (1/4) + 1 x 10 (3/8) 1 K (290) 2 x 10 (3/8) 15 2 x 10 (3/8) 1 K (290) 2 x 10 (3/8) 15 2 x 10 (3/8) 1 K Material recycling: 100% Accessories: see end of chapter 86

87 Anti-corrosion Hose Reel Series 888/889 The anti-corrosion hose reels have a stainless steel stand, brass hub and swivel, and drum of composite material. Suitable for wash down applications indoors and outdoors All components manufactured in highly corrosion resistant materials Adjustable outlet minimizes friction Series 888: 426(16.75) Series 889: 476 (18.75) 157 (6.2) ~200 (~8) Ø 13 (0.51) 125 (4.9) Series 888: 560 (22) Series 889: 590 (23.2) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Water food grade 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E hose Water food grade 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E hose HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Material recycling: 100 % Accessories: see end of chapter 87

88 Anti-corrosion Hose Reel Series 893 The anti-corrosion hose reels have a stainless steel stand, brass hub and swivel, and drum of composite material. Suitable for wash down applications indoors and outdoors All components manufactured in highly corrosion resistant materials Adjustable outlet minimizes friction ~200 (~8) 480 (19) 130 (5.1) 460 (18) Ø 9 (0.35) 220 (8.7) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Water food grade hose 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Material recycling: 100 % 88

89 Stainless Steel Hose Reel Series 888/889 Suitable for tough indoor and outdoor environments. Their very high corrosion resistance means that they can withstand exposure to high air humidity and to chemicals. All components manufactured in stainless steel Open design facilitates cleaning Adjustable outlet arm minimizes friction Series 888: 426 (16.75) Series 889: 476 (18.75) 157 (6.2) ~200 (~8) Ø13 (0.51) 125 (4.9) Series 888: 560 (22) Series 889: 590 (23.2) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Water food grade hose 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E Water food grade hose 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Material recycling: 100% Accessories: see end of chapter 89

90 Stainless Steel Hose Reel Series 893 Suitable for tough indoor and outdoor environments. Their very high corrosion resistance means that they can withstand exposure to high air humidity and to chemicals. All components manufactured in stainless steel Open design facilitates cleaning Adjustable outlet arm minimizes friction ~200 (~8) 480 (19) 460 (18) 130 (5.1) Ø 9 (0.35) 220 (8.7) Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Water food grade hose 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber E HP water 25 (3625) 10 (3/8) (3/8) 1 Rubber G Material recycling: 100% 90

91 Stainless Steel Hose Reel Series 886 This hose reel, made entirely of stainless steel, is designed specifically for the food processing industry. It is very easy to clean thanks to rounded edges and features an easy to dismantle hose outlet, an externally mounted swivel, and a minimum number of material joints. Unique design makes easy cleaning Up to 25 m (82 ft.) hose capacity Meets international hygienic requirements 732 (29) Ø555 (22) 180 (7.1) 180 (7.1) Ø13 (0.51) ( ) Reel without hoses Use for Max. working pressure, MPa (psi) For hose dimensions Int. Ø, mm (in) For hose dimensions Length, m Weight excl. hose, kg Reel without hose Water 2.0 (290) 19 (3/4) Water 2.0 (290) 25 (1) Water 10 (1450) 12.5 (1/2) HP water 25 (3625) 10 (3/8) Hoses with galvanized fittings Use for Max. working pressure, MPa (psi) Hose type (see end of chapter) Int. Ø, mm (in) Distribution hose Length, m Distribution hose Connection hose Length, m Connection hose Water food grade hose 2.0 (290) E 12.5 (1/2) Water food grade hose 2.0 (290) E 19 (3/4) Water food grade hose 2.0 (290) E 25 (1) HP water 25 (3625) G 10 (3/8) Hoses with stainless steel fittings Use for Max. working pressure, MPa (psi) Hose type (see end of chapter) Int. Ø, mm (in) Distribution hose Length, m Distribution hose Connection hose Length, m Connection hose Water food grade hose 2.0 (290) F 12.5 (1/2) Water food grade hose 2.0 (290) F 19 (3/4) Water food grade hose 2.0 (290) F 25 (1) HP water 25 (3625) H 10 (3/8) Material recycling: 100 % Accessories: see end of chapter 91

92 Ex approved Hose Reel Series 889 Series 889 Ex is a medium sized hose reel for industrial use. All main components are made of stainless steel and conductive composite material. Approved for use in Ex zones 1, 2, 21 and 22 in accordance with ATEX 94/9/EC, Equipment group II, Category 2G D. Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Air/Water 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber M Material recycling: 100% Ex approved Hose Reel Series 886 Series 886 Ex is a hose reel with large hose capacity for heavy duty industrial use. It is constructed for environments where high hygiene and corrosion resistance is required. All components are made of stainless steel and conductive composite material. Approved for use in zones 1, 2, 21 and 22 in accordance with ATEX 94/9/EC, Equipment group II, Category 2G D. Use for Max. working pressure, MPa (psi) Distribution hose, Int. Ø, mm (in) Distribution hose, Length, m Connection hose, Int. Ø, mm (in) Connection hose, Length, m Hose material Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose Air/Water 2.0 (290) 12.5 (1/2) (1/2) 1 Rubber M Air/Water 2.0 (290) 19 (3/4) (3/4) 1 Rubber M Material recycling: 100% Accessories: see end of chapter 92

93 225 (8.9) Vacuum Hose Reel Series 881 The vacuum hose reel facilitates the handling of long and heavy vacuum hoses, and provides tidy and safe storage when they are not in use. Keeps hoses out of the way of forklifts and mobile workshop equipment. Separate suspension brackets make installation of the reel simple and safe. All reels are delivered without connection hose. Antistatic reel and vacuum hose Supplied with automatic damper Integrated micro-switch 260 (10.2) 630 (25) 750 (29.5) 520 (20.5) Max. suction, kpa (psi) Hose dimensions, Int. Ø, mm (in) Hose dimensions, Length, m Hose type (see end of chapter) Weight, kg Reel with hose Reel without hose 45 (7) 38 (1 1/2) 10 L (7) 50 (2) 10 L Material recycling: 100% N.B. All reels are delivered without connection hose. Pipe system Ø, mm Installation kits The kits include all necessary installation material for pipe connections Ø 63 mm (2½ in) or Ø 100 mm (4 in) (branch coupler, joint sleeves, connecting hose P63, brackets 300 mm (12 in), pilot cable, connection box, straps, hose clamps). Accessories: see end of chapter 93

94 Cable Reel Series C20 Safe and functional cable reels for industrial use, professional tradesmen or do-it-yourself workshops. Robust design in high impact composite materials. Supplied with an easily mounted snap-on, pivoting wall bracket and a unique safety latch for safe and easy service. Equally suitable for electrical tools and hand lamps. Snap-on wall bracket Unique safety latch Drum with ball bearings on both sides Degree of protection code, IP 55 Rubber power cable 350 (13.) 170 (6.7) 220 (8.7) 315 (12.4) Ø 8.5 (0.33) Voltage, V Input Max. power W Conductors No. x mm ² Distribution cable, Length, m Distribution cable, Type Connection cable, No. x mm ² Connection cable, Length, m x H07RN-F 3 x ~ x H07RN-F 3 x ~ * x H07RN-F 3 x ~ ** Weight, kg * Distribution cable with Euro socket and connection cable with Euro plug, IP 44. ** Distribution cable with UK socket. Material recycling: 100 % Accessories: see end of chapter 94

95 Cable Reel Series C20 with lamp Cable reel provided with handlamp of LED or fluorescent type. The handlamps are of compact design, with on/off switch, swivelling fixing hook, shatter proof polycarbonate lens and an ergonomic grip. The reel is provided with a built in transformer. Snap-on wall bracket Unique safety latch Drum with ball bearings on both sides Degree of protection code, IP 55 Rubber power cable 350 (13.) 170 (6.7) 220 (8.7) 315 (12.4) Ø 8.5 (0.33) Voltage, V Input Voltage, V Lamp Max. power lamp W Lamp type Conductors No. x mm ² Distribution cable, Length, m Distribution cable, Type Connection cable, No. x mm ² Connection cable, Length, m LED 2 x H05RN-F 2 x ~ Fluorescent 2 x H05RN-F 2 x ~ Material recycling: 100 % Weight, kg 95

96 Ø 8.5 (0.33) Cable Reel Series C30 Safe and functional cable reels for industrial use, professional tradesmen or do-it-yourself workshops. Robust design in high impact composite materials. Supplied with an easily mounted snap-on, pivoting wall bracket and a unique safety latch for safe and easy service. Equally suitable for electrical tools and hand lamps. Snap-on wall bracket Unique safety latch Drum with ball bearings on both sides Degree of protection code, IP 55 Rubber power cable Cable easily replaced 400 (15.75) 180 (7) 275 (10) 375 (14.75) Voltage, V Amperage, A Max power, W Conductors No. x mm ² Distribution cable, Length, m Distribution cable, Type Connection cable, No. x mm ² Connection cable, Length, m x H07RN-F 3 x ~ x H07RN-F 3 x ~ * x H07RN-F 3 x ~ ** * Distribution cable with Euro socket and connection cable with Euro plug, IP 44 ** Distribution cable with UK socket. Material recycling: 100 % Weight, kg 96

97 220 (8.7) 425 (16.75) 450 (17.75) Cable Reel Series 793 A heavy duty cable reel for use in industrial environments. Available in 1-phase and 3-phase versions and supplied with thermal overload protector. Accommodates power cable lengths up to 25 m (82 ft.). Components made of composite materials and galvanized steel. Degree of protection code: IP 55 Tested and approved according to IEC Rubber power cable 280 (11) 460 (18) 90 (3.5) 130 (5.1) 9 (0.35) 60 Voltage, V Amperage, A Max. power, W Phase Conductors, No. x area, mm² Distribution cable, Length, m Distribution cable, Type Connection cable length, m Weight, kg Reel with cable x H07RN-F x H07RN-F x H07RN-F x H07RN-F Material recycling: 100% 97

98 Accessories Description Pivoting wall bracket for Series 876, 883, 888, 889 and 793 Hole spacing and dimensions for wall mounting are the same as on the reel foot plate Galvanized Stainless steel Pivoting wall bracket for Series 884 and 886 Galvanized Stainless steel Water guns Chromium plated brass. Blue. Provided with safe hand grip and insulated trigger. Connection = 1/2 Female BSP Stainless steel, quality 316. White. Provided with safe hand grip and insulated trigger. Connection = 1/2 Female BSP For high temperature water. Stainless steel, quality 316. Red. Provided with safe and insulated hand grip and insulated trigger. Connection = 1/2 Female BS Ex approved by TÜV for use in Zone 1, 2 and 22. Stainless steel, quality 316. Black. Provided with safe and insulated hand grip and insulated trigger. Connection = 1/2 Female BSP Air gun With high blowing force and ergonomic design. Housing and trigger of POM / Acetal plastic. Airpipe in electro-plated steel. Connection = 1/4 Female BSP Swivelling high pressure couplings Adapter / Adapter 25 MPa (3625 psi) 3/8 male BSP 3/8 male BSP Plated steel /8 male BSP 3/8 male BSP Stainless steel Swivelling low pressure couplings Adapter / Adapter 2.0 MPa (290 psi) 1/2 male BSP 3/8 female BSP Brass /2 male BSP 1/2 female BSP Brass /2 male BSP 3/4 female BSP Brass /2 male BSP 3/8 female BSP Stainless steel /2 male BSP 1/2 female BSP Stainless steel /2 male BSP 3/4 female BSP Stainless steel Fluorescent hand lamp Delivered without power cable. 230 V AC, 50 Hz, 11 W V AC, 50 Hz, 11 W

99 Description Manual control gun for oil/anti-freeze up to SAE 140 Includes:1/2 BSP inlet, swivel 45º, flexible outlet with manual non-drip nozzle. Connection: 1/2 male BSP Includes:1/2 BSP inlet, swivel 45º, flexible outlet with manual non-drip nozzle. Connection: 1/2 male BSP. N.B. Handle with locking device Digital oil control meter Complete 1/2 BSP inlet, swivel 90º, flexible outlet with manual non-drip nozzle. Flow rate from 1 to 35 l/min. Precision ± 0.5 %. Maximum working pressure: 70 bar. Entry with standard 1/2 swivel connector. Connection: 1/2 male BSP. Pre-set meter, 1/2 BSP inlet, swivel 90º, flexible outlet with manual non-drip nozzle. Flow rate from 1 30 l/min. Precision ±0.5 % over the entire flow capacity range. Maximum working pressure: 65 bar. Maximum pre-selectable quantity 99.9 litres. 5-digit LCD-Display. Connection: 1/2 male BSP Guns for multi fluids Manual gun for water/anti-freeze. Connection: 3/8 Female BSP. Digital control meter for anti-freeze, brake fluid and windscreen washer fluid, complete, 1/2 inlet, swivel 90º, flexible outlet with manual non-drip nozzle. Flow rate from 1 to 35 l/min. Precision ± 0.5 %. Maximum working pressure: 70 bar. Connection: 1/2 male BSP Hose Specifications Hose type A B D E F G H I J K L M Specification Cover in PVC and inner tube in PUR. Synthetic textile braid Cover in NBR / PVC and inner tube in NBR. Synthetic textile braid Cover in NBR / PVC and inner tube in NBR. Synthetic textile braid Cover in NBR / PVC and inner tube in food grade quality NBR. Synthetic textile braid Cover in NBR / PVC and inner tube in food grade quality NBR. Synthetic textile braid Cover and inner tube in synthetic rubber. Single steel braid Cover and inner tube in synthetic rubber. Single steel braid Cover and inner tube in SBR based rubber. Single steel braid Cover and inner tube in synthetic, oil resistant rubber. Double steel braid Cover and inner tube in rubber, synthetic textile braid (acc. to EN-559) Corrugated ethyl-vinyl-acetate (EVA). Electrically conductive Cover in CR and inner tube in NBR. Synthetic textile braid. Electrically conductive Temperature range, C Hose fittings in free hose end, Distribution hose Hose fittings in free hose end, Inlet hose Hose connection on reel, Distribution hose Hose connection on reel, Inlet hose Male 1/4 BSP, brass. No inlet hose included. Hose tail 3/8 + clamp With spiral hose protector Male BSP, chrome plated Hose tail + clamp Hose tail 1/2 + clamp Male BSP, chrome plated Hose tail + clamp Hose tail + clamp (steam up to +165 ) (steam up to +165) Male BSP 60 cone, chrome plated Male BSP 60 cone, stainless steel Female BSP 60 cone, chrome plated. With rubber hose grip Female BSP 60 cone, stainless steel. With rubber hose grip Female BSP 60 cone, chrome plated Female BSP 60 cone, chrome plated Female BSP 60 cone, chrome plated Female BSP 60 cone, stainless steel Female BSP 60 cone, chrome plated Female BSP 60 cone, stainless steel Female BSP 60 cone, chrome plated Female BSP 60 cone, chrome plated Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Male BSP 60 cone Hose tail + clamp Hose tail + clamp No inlet hose included Included for Ø 38 mm and Ø 50 mm Female BSP 60 cone, stainless steel Female BSP 60 cone, stainless steel NB! Thread dimensions of hose fittings and dimensions of hose tails are always the same as the hose dimension, unless otherwise stated. Male BSP 60 cone Ø 63 mm Male BSP 60 cone 99

100 Balancers Series 810 A B C Series 810 Balancer makes the tool weightless and minimizes the strain on the operator. The balancer comes in three different models and in nine weight classes, with a span from 0.5 kg to 10.9 kg (1 lb to 24 lb). Covering material: composite. Designed with safety-chain mounting point Convenient snap-type tool clip With clevis and pin shackle for quick and easy mounting Type Lift power, kg Cord length, m Cord material A Nylon cord A Nylon cord B Steel wire B Steel wire C Steel wire C Steel wire C Steel wire C Steel wire Balancer Series 883 The balancer supports the tool or hose and keeps it lifted at all times. An integrated centrifugal brake prevents the balancer from recoiling too quickly, which minimizes the risk of personal injury and material damage. Hoist length, 8m (26 ft.). Makes easier handling of tool or hose Safe operation Exceptional hoist length Description Capacity, kg Balancer, incl latch Balancer, incl latch Accessories Pivoting bracket On/off switch

101 Curtains Standard sized curtains (see below) provided with 50 mm welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self extinguishing PVCmaterial with flash point ºC ( F). Width: 1400 mm (55 in.), Thickness: mm ( in.). The Nederman yellow and clear transparent curtains are used for glare, splatter, grinding, dust etc. but are not aimed for welding, unlike our EN1598 compliant curtains that are ideal for welding applications. Replacement parts Description PVC rings, 7-pack Steel rings, 7-pack Colour Height, mm Approvals Dark green (black), Opaque 1800 EN Dark green (black), Opaque 2400 EN Dark green (black), Opaque 2800 EN Dark green, Transparent 1800 EN Dark green, Transparent 2400 EN Dark green, Transparent 2800 EN Red / orange, Transparent 1800 EN Red / orange, Transparent 2400 EN Red / orange, Transparent 2800 EN Bronze, Transparent 1800 EN Bronze, Transparent 2400 EN Bronze, Transparent 2800 EN Yellow, Transparent Yellow, Transparent Yellow, Transparent Clear, Transparent Clear, Transparent Clear, Transparent Steel suspension rings included. PVC-rings available as accessories. Total width of curtains shall be 10% longer than total required screening length to compensate for folding. Curtain Screen The protection curtain screens are easily movable for welding, grinding, turning, milling etc, and are ideal for the screening of temporary or permanent work places. The frame is manufactured from galvanised tube and the curtain of self-extinguishing PVC material (as the standard curtains above) and complying with EN1598 for welding. Delivered complete with frame and curtain with total dimension WxH=1700x2000 mm (67x79 in.) (just curtain H=1700 mm (67 in.)). Weight 7.5 kg (16 lbs). Colour Approvals Dark green (black)opaque EN Dark green Transparent EN Red / orange Transparent EN

102 102

103