Alsident System 50 Flex

Size: px

Start display at page:

Download "Alsident System 50 Flex"

Melvin McDowell
5 years ago
Views:

1 Alsident System 50 Flex Aluminium (AL) Antistatic (AS) Product Information

3 System 50 Flex General Information Product Specification Product Description System 50 Flex Aluminium/Antistatic The System 50 Aluminium Extraction Arm from ALSIDENT SYSTEM features a range of extraction arms with a special self-supporting flexible hose and an aluminium extractor tube. System 50 Flex is available in an aluminium version (AL) and an antistatic version (AS). System 50 Flex AS is made of anodised aluminium tubes and flexible joints in black, white or red polypropylene (PP). System 50 Flex AS is made of chromated aluminium tubes and flexible joints of conductive polypropylene (PP). The internal parts of both versions are made of stainless steel and the hose is made of conductive ABS plastic. System 50 Flex arms are available for mounting directly on table or table bracket. System 50 Flex AL is approved for use in ESD-areas according to IEC and is therefore delivered with an earthing wire with a 1MΩ resistance. Further information is available in Mounting Instructions on the extraction arm or under Technical Information on our website. System 50 Flex AS is also suitable where static electricity must be avoided and is available in lengths with a maximum horizontal range of 900 mm. 50 Flex GI 01

4 System 50 Flex General Information Product Specification Technical specifications Recommended Airflow: Normal: 65 m 3 /h Minimum: 45 m 3 /h Maximum: 85 m 3 /h Air temperature: Key to the signatures SYSTEM NO. 50 Flex VERSION AL AS -15 C C Material AL: Pipes Anodised aluminium (10 µ) Joints Polypropylene (PP) red, white or black Hose: Conductive ABS O-ring: Polyethylene (PE) Flange: Polypropylene (PP) red, white or black Ring: Polypropylene (PP) black Damper: Polyethylene (PE) Thumbscrew: Polypropylene (PP) black Threaded stay: Acid-proof stainless steel Spring: Acid-proof stainless steel Material AS: Pipes: Chromated aluminium Joint: Conductive polypropylene (PP) Hose: Conductive ABS O-ring: Polyethylene (PE) Flange: Conductive polypropylene (PP) Ring: Polypropylene (PP) black Damper: Polyethylene (PE) Thumbscrew: Polypropylene (PP) yellow Threaded stay: Acid-proof stainless steel Spring: Acid-proof stainless steel Abbr.: PP: Polypropylene Shatterproof and chemical resistant Technical Reports Technical Reports: PE: PETG: ABS: TCP: Aluminium Antistatic Polyethylene Polyethylene Therephthalat, Glycol-modified Transparent and resistant to solvents Acrylonitrile Butadiene Styrene Trivalent Chromium Passivation RoHS compatible surface tratment for aluminium Local Extraction for workplaces incl. all materials for mounting. All components RoHS-compatible according to the directive 2002/95/EF (RoHS). Capture Efficiency (Danish Technological Institute) ESD test report (DELTA) Download: > Technical Support > Test Reports CHAPTER GI TM General Information Table Mounted PAGE NO Flex GI 02

System 50 Flex General Information Product Overview

5 System 50 Flex General Information Product Overview Table Mounted Aluminium Aluminium, no joint Aluminium,1 joint Aluminium, 2 joints No. of Joints L [mm] B [mm] C [mm] Weight app. [kg] Part No. Red Joints: White , Black 50 Flex GI 03

6 System 50 Flex General Information Product Overview Table mounted Antistatic Antistatic, no joint Antistatic,1 joint Antistatic,2 joints No. of joints L [mm] B [mm] C [mm] Weight app. [kg] Part No. 50 Flex GI 04

System 50 Flex General Information Accessories Overview Table Bracket Part no.: 2-5010 /-050 Used to mount System 50 Flex arms on tableside, which makes it removable.

7 System 50 Flex General Information Accessories Overview Table Bracket Part no.: /-050 Used to mount System 50 Flex arms on tableside, which makes it removable. Made of white or black polyester powder coated steel. Other colours available on request Colour Used to connect System 50 Flex arms to ducting. Made of white or black Polypropylene (PP). Available in two sizes. Part No. White powder coated Black powder coated Reducers Reducing from/to White Black 63/50 mm /50 mm Flex GI 05

8 System 50 Flex General Information Pressure Loss Pressure Loss Chart Tested by Danish Technological Institute A : No joint B : 1 joint C : 2 joints 50 Flex GI 06

1 5 2 3 1.5 1 1.6 6 5 4 2.1 2 1.5 3 1 1.6 1.3 1.4 1.1 1.2 Antistatic Joint with damper 4-50-6 1.

9 System 50 Flex General Information Spareparts Joint with damper Aluminium Joint with damper /-5 / Antistatic Joint with damper Flex GI 07

10 Spareparts List Joint with damper Pos. Version Joint Part No. A Aluminium 1-joint B Aluminium 2-joint C Antistatic 1-joint D Antistatic 2-joint Pos. Spare part No. Red White Black AS Description A B C D Joint, 12 mm (1-joint) Joint, 12 mm (2-joint) Teflon Washer Thumbscrew, 5 mm Thumbscrew, 4 mm Wing for damper Damper Seegerring Joint, 5 mm Thumbscrew, 4 mm O-ring Threaded Stay Teflon Washer Thumbscrew, 5 mm When ordering spare parts pos. 1 or 2 the underlying spare parts ( or 2.1) are included. [pieces applied] 50 Flex GI 07 08

11 System 50 Flex Table Mounted (TM) Mounting Options Table Mounted Option Dimensions Directly on table: System 50 Flex Arm mounted directly on a table with flange screwed to table plate. Accessories: No brackets used. (All measurements in mm) MOUNTING INSTRUCTION On-line video or pdf 50 Flex TM 01

System 50 Flex Table Mounted (TM) Mounting Options Table Mounted Option Dimensions (All measurements in mm) With table bracket System 50 Flex Extraction arm mounted on table side with a table bracket.

12 System 50 Flex Table Mounted (TM) Mounting Options Table Mounted Option Dimensions (All measurements in mm) With table bracket System 50 Flex Extraction arm mounted on table side with a table bracket. Very functional option when impossible to mount directly on table or when a mobile installation is required. Accessories: Table Bracket, Part No /-050 MOUNTING INSTRUCTION On-line video or pdf 50 Flex TM 02

13 System 50 Flex Table Mounted (TM) Table Bracket Technical Description Part no.: /-050 Dimensions (All measurements in mm) Used to mount System 50 Flex Table Mounted arms on tableside. Removable for mobile installations. Made of white or black polyester powder coated steel. Other colours available on request. Colour Part No. White Black Flex TM 03

14 System 50 Flex Table Mounted (TM) Spare Parts (A) /-5 /-050 (B) (C) /-5 /-050 (D) Flex TM

15 System 50 Flex Table Mounted (TM) Spare Parts List Pos. Product No. Red White Black AS Joints A joint B joint C D joint joint Pos. Spare part No. Red White Black AS Description A B C D [Number of used parts] C-pipe TM Spring TM, 3 mm (2 joints) O-ring B-pipe Threaded stay Thumbscrew Teflon washer Joint with damper* (short) Joint with damper* Joint Hose, black *) Spare parts List for Joint with damper see General Information Spareparts list for Joint with Damper, please quote: Part no. e.g Description - B-pipe 375 Sparepart No Number - 1 pc. If you wish to customize the arm with a sparepart which is not a constituent part of the particular model, please contact your Alsident dealer. 50 Flex TM 05

SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information

SYSTEM 25 SYSTEM 50 SYSTEM 63 SYSTEM 75 SYSTEM 100 AL. Alsident System100. Aluminium (AL) Product Information Alsident System100 Aluminium (AL) Product Information System 100 Aluminium (AL) General Information Product Specification Product Description System 100 Aluminium Alsident System airflow between 140-400