IN-LINE DUCT FANS MIXVENT-TD Fan Systems

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "IN-LINE DUCT FANS MIXVENT-TD Fan Systems"

Transcription

1 IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range of in-line fans. All MIXVENT TD fans include the combination of a powerful motor factory matched to a mixed flow impeller. This motor and impeller combination enables the MIXVENT- TD fans to deliver high airflow performances with the minimum of noise generation against high static pressures typically found in ducted ventilation systems. The unique design of the MIXVENT TD and TDx2 support brackets, allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting and therefore facilitating any installation or maintenance. Classic centrifugal In-line centrifugal MIXVENT flow The internal aerodynamic design of MIXVENT- TD fan enables the unit to generate large air volumes and pressures with the minimum of in-duct or radiated noise. An additional advantage of the MIXVENT TD fans is that they are fitted with direct connection two speed motors as standard. In addition, all motors are suitable for speed control regulation using electronic or auto-transformer controllers. The MIXVENT-TD fans offer the ideal in-line duct fan solution for a wide range of HVAC ventilation applications. The MIXVENT system includes 3 ranges of products: MIXVENT TD, Single Fan Unit MIXVENT TDx2, Twin Fan Unit MIXVENT TD-T, Twin Fan Unit with Overrun Timer The MIXVENT-TD consists of eight (8) nominal sized in-line fans. All models are specifically designed for direct connection in-line with industry standard diameter circular ducting. The MIXVENT-TDx2 range consists of two MIXVENT TD fans mounted in series to produce almost twice the pressure of a single TD fan. The range consists of 5 nominal fan diameter sizes. The MIXVENT-TD-T consists of a range of five (5) nominal size TD fans (16, 25, 35, 5 and 8) fitted with an Run-On-Timer adjustable between 1 to 3 minutes. (The MIXVENT TD-T range is not suitable for speed control.) Accessories The MIXVENT System includes a specific range of accessories enabling the installation of different combinations of the MIXVENT TD and MIXVENT TDx2 fans, using models 35, 5, 8 and 1. These combinations include: MIXVENT Twin Two MIXVENT TD fans mounted in parallel using the Twin Base Kit. Mounting the fans in parallel produces double the duty of one fan (at the same pressure). MIXVENT Twin x 2 Two MIXVENT TDx2 fans mounted in parallel using the Twin Base Kit. Mounting the fans in parallel produces double the duty of a single TDx2fan (at the same pressure). MIXVENT Twin x 3 MIXVENT-TD and MIXVENT TDx2 mounted in series using the Flange (MBR). The pressure achieved by this arrangement will produce almost three times that of a single unit (at the same ar volume). To compliment the MIXVENT System a range of electrical and additional mechanical accessories are available to complete the most demanding installations. 164 The MIXVENT TD models are manufactured in tough reinforced plastic, except models 16, 1, 13 & 2 which have a steel casing and are finished in a tough epoxy-polyester paint coating. The TD fan duct connection flanges are manufactured from reinforced plastic, except for models 8, 1, 13 & 2 which are constructed from epoxy-polyester coated sheet steel. Impellers The impeller blades are moulded in tough ABS plastic except models 1, 13 and 2 which are constructed from pressed galvanised sheet steel. Motors Models 16, 25 and 35 include: Single-phase, 23V 5Hz, shaded pole induction asynchronous motor with squirrel cage rotor in die cast aluminium. All motors include direct two speed connection and are also suitable for voltage speed control*. Manufactured in accordance to standards UNE and CEI Class ll electrical insulation (model 16) and Class l (models 25 and 35) IP 44 Protection Class B Motor Insulation with Humidity Protection Safety Thermal Overload Protection (fuse type) Self-lubricating sleeve bearings. Models 5, 8, 1, 13 and 2 include: Single-phase induction asynchronous motor, with permanent capacitor and external rotor in die cast aluminium. All models include direct two speed connection and are also suitable for voltage speed control*. Manufactured in accordance with standards UNE and CEI Class I electrical insulation. IP 44 Protection Class B Motor Insulation with Humidity protection Thermal Overload Protection (automatic reset type). Sealed For Life, ball bearing assemblies. *Except TD-T models.

2 MIXVENT-TD / MIXVENT TDx2 Model Reference T D - 8 / 2 N T Series reference 2 MIXVENT TD model type (Nom. max. m 3 /hr) 3 Nominal ducting connection diameter (mm) 4 N Standard Model T Model with adjustable Run-On-timer Technical characteristics Nom. Maximum Maximum Duty at Maximum Sound Weight speed absorbed absorbed free operating pressure power at Pa current discharge temperature level* Model Type (r.p.m.) (W) (A) (m 3 /h) ( C) (db(a)) (kg) TD-16/1N 25 35, , TD-25/ , , TD-35/ , , , TD-5/ , TD-8/2N 27 8, , TD-8/ , , TD-1/ , , TD- 13/ , , TD-2/ , , NEW * Radiated sound level measured at 3 m from product casing at free air conditions. Reference 1,4 2, 2, 2,7 4,9 4,9 9,4 9,4 14, T D x 2-8 / 2 N Technical characteristics Series reference 2 MIXVENT TD model type (Nom. max. m 3 /h) 3 Nominal ducting connection diameter (mm) 4 New model Nom. Maximum Maximum Duty at Maximum Sound Weight speed absorbed absorbed free operating pressure power at Pa. current discharge temp. level* Model Type (r.p.m.) (W) (A) (m 3 /h) ( C) (db(a)) (kg) TDx2-35/ , , , , TDx2-5/ , , TDx2-8/2N , , ,7 TDx2-8/ , , ,7 TDx2-1/ , , ,7 TDx2-13/ , , ,7 NEW * Radiated sound level measured at 3 m from ducting product at free air conditions.

3 MIXVENT TD Performance curves Q = Air volume in, m 3 /hr and m 3 /s HS = High speed Pe = Static pressure in mmwg and Pa. LS = Low speed Dry air at 2 ºC and 76 mmhg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE

4 MIXVENT TD Performance curves Q = Air volume in, m 3 /hr and m 3 /s HS = High speed Pe = Static pressure in mmwg and Pa. LS = Low speed Dry air at 2 ºC and 76 mmhg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE

5 MIXVENT TDx2 Performance curves Q = Air volume in, m 3 /hr and m 3 /s HS = High speed Pe = Static pressure in mmwg and Pa. LS = Low speed Dry air at 2 ºC and 76 mmhg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE

6 MIXVENT SYSTEM - COMBINATIONS MIXVENT Twin Components Twin MIXVENT Twin x 2 Twin with back-draft shutter accessories Kit Twin Base TD -16/1 Kit Twin Base TD 25/1 Kit Twin Base TD -35/125 Kit Twin Base-5/ TD-5/15 Kit Twin Base-5/ TD-5/16 Kit Twin Base TD-8/2 Kit Twin Base TD-1/25 Kit Twin Base TD-13/25 Kit Twin Base TD-2/315 For back-draft shutter see accessories. Components Kit Twin Base TDx2-35/125 Kit Twin Base-5/ TDx2-5/15 Kit Twin Base-5/ TDx2-5/16 Kit Twin Base TDx2-8/2 Kit Twin Base TDx2-1/25 Kit Twin Base TDx2-13/25 Twin x 2 Description Twin x 2 with back-draft shutter accessories For back-drauft shutter see accessories. Kit Twin Base Nominal dimensions of rectangular ducting L B H Model Type L x H (mm) Kit Twin base x 14 Kit Twin base x 14 Kit Twin base x 18 Kit Twin base x 2 Kit Twin base - 1/13 5 x 25 Kit Twin base x 315 The independent operation of two TD or TDx2 fans requires the use of back-draft shutters at the discharge (outlet) in order to prevent the air recycling through a stationary fan. MIXVENT TD x 3 Reference Model Type TDx3-35/125 TDx3-5/15 TDx3-5/16 TDx3-8/2 Components TD-35/125+TDx2-35/125+MBR-35 TD-5/15+TDx2-5/15+MBR-5/15 TD-5/16+TDx2-5/16+MBR-5/16 TD-8/2+TDx2-8/2+MBR-8 TDx3-1/25 TD-1/25+TDx2-1/25+MBR-1 TDx3-13/25 TD-13/25+TDx2-13/25+MBR-1 TD x 3: with MBR connection flange Description Flange MBR One fan only in operation Two fan in operation A B C A B C fan in use: A Direction of flow fan in use A and B or A and C Direction of flow 169

7 Performance curves Q = Air volume in, m 3 /hr and m 3 /s Pe = Static pressure in mmwg and Pa. Dry air at 2 ºC and 76 mmhg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE Pa Pa 6 PeP mmce mmwg 6 MIXVENT TWIN Twin 35 Twin x 2-35 TD x 3-35 Twin 5 Twin x 2-5 TD x Twin 8 Twin x 2-8 TD x 3-8 Twin 1 Twin x 2-1 TD x 3-1 Twin 13 Twin x 2-13 TD x ,1,2,3,4,5,7 m 3 /h Q m 3 /s Pa Pa 8 PeP mmce mm.c.d.a 8 MIXVENT TWIN x 2 PeP Pa Pa mmwg mmce MIXVENT TD x ,1,2,3,4,5,7 m 3 /h Q m 3 /s ,5,1,2,3 m 3 /h Q m 3 /s 17

8 MIXVENT-TD System Accessories Filtration Box MFL The MFL range of in-line heavy duty cabinet filters of type EU3 grade filtration are designed for direct connection with standard circular ducting. p(pa) 15 1 Filter pressure loss (Pa) Ø D B E F Filter type A B Ø D E F MFL MFL MFL MFL m/s A MFL Air speed MFL MBE, Electrical Heater Batteries The MBE electric heater battery sections are designed to be installed on the discharge side of the MIXVENT-TD fans. The units incorporate insulated (black heat) element rods (23V 3W/cm 2 ) with an automatic integrated overheat thermostat (set at 9º C). This thermostat in turn is wired in series with an additional safety overheat manual reset thermostat (set at 12º C). In the case of the unit overheating the second thermostat will switch the unit off, after which the heater can then be Reset manually via the push button switch. All wiring terminations and connections are located on the side of the heater casing. The heaters are available for single phase (models MBE 1, 125 and 16) or three phase (models 2, 25 and 315) electrical supply connection in conjuntion with appropriate circuit protection. All units are supplied with an IP43 rated wiring enclosure. The minimum air velocity through the heater batteries must be >= 1.5 m/s. A range of controllers accessories to accompany the electric heater range are available. These controllers accessories modulate the heater output as a function of the required environmental temperature (see Electrical Accessories section of this catalogue). HEATER BATTERY SELECTION EXAMPLE DATA: Required air volume : 7m 3 /hr (Q) Temp. of air entering: +5º C Temp. required at discharge: +27º C Type Electric Heater Supply Min. Wiring Controller MIXVENT-TD heater power voltage air diagram* type type output volume (W) (V) (m 3 /h) 25/1 MBE-1/4B 4 1/23 5 E1 REG 6 35/125 MBE-125/12B 12 1/23 7 E1 REG 6 5/16 MBE-16/21B 21 1/23 11 E1 REG 6 8/2 MBE-2/5T 5 2/4 17 E2 REG /25 MBE-25/6T 6 2/4 27 E2 REG 6 2/315 MBE-315/9T 9 3/4 42 E3 REG 16 HEATER BATTERY POWER REQUIRED: T (ºC) 5 Temperature difference T between air entry and discharge (ºC) P = Q x.36 x DT P = 7 x.36 x (27-5) P = 5544 W W 6 W 9 W SELECTION OF HEATER: MBE-2/5T or MBE-25/6T The final selection depends upon: Available space Total system pressure loss Sound level. 15 p(pa) W 12 W m 3 /h Air speed Electric heater pressure loss p(pa) MBE - 315/9 MBE - 2/5 y 25/6 MBE - 125/12 y 16/ m/s Air Volume W MBE - 1/4 Dimensions (mm)

9 Installation accessories Grilles MRJ Mounted at the inlet or outlet of the fan, the MRJ grille prevents the entry of any foriegn objects. Rectangular Duct Adapters MAR The MAR adapter enables the MIXVENT TD, TDx2 or TDx3 to be connected to rectangular ducting. Back-Draft Shutters MCA Mounted at the outlet of the MIXVENT TD and TDx2 fans, the shutter prevents the air re-circulating when the fans are not in use. Type TD, TD x 2, TD x 3 MRJ /1N - 25/1 MRJ /125 MRJ - 5/15 5/15 MRJ - 5/16 5/16 MRJ - 8 8/2-8/2N MRJ - 1 1/25-13/25 MRJ - 2 2/315 TD Nominal dim. TD x 2 of ducting Type TD x 3 L x H in mm MAR /1N - 25/1 224 x 14 MAR / x 14 MAR - 5/15 5/15 28 x 18 MAR - 5/16 5/16 28 x 18 MAR - 8 8/2-8/2N 315 x 2 MAR /255 4 x 25 MAR - 2 2/ X 315 Type TD, TD x 2, TD x 3 MCA /1N - 25/1 MCA /125 MCA - 5/15 5/15 MCA - 5/16 5/16 MCA - 8 8/2-8/2N MCA - 1 1/25-13/25 MCA - 2 2/315 Accessories REGUL 2 2 Speed switches REB Single-phase electronic speed controller RMB Single-phase auto-transformer speed controller. GSA Flexible aluminium ducting GSI Flexible Acoustic ducting CX Ducting Fixing clamps STC In-duct temperature sensor STA Ambient air temperature sensor BOC Circular air valves PER Exterior plastic louvre shutters MRT RED Joining pieces and reducers Dimensions (mm). TD Series TD-16/1N Ø 4, , ,5 95, Ø 97 Ø 137,5 95 TD-25 to TD-2 Model Type X A Ø B C Ø D E F G H TD-16/1N , ,5 131 TD- 25/ TD- 35/ TD- 5/ TD- 5/ TD- 8/2N 232, TD- 8/2 232, TD-1/ TD-13/ TD-2/

10 Dimensions (mm). TDx2, TDx3 & Twin Series TDx2 X E Ø Ø Model Type X A B C D E F G H TDx2-35/ , C F TDx2-5/15 212, , TDx2-5/16 212, , D B ø 5,5 TDx2-8/2 232, TDx2-1/25 291, TDx2-13/25 291, H G A Twin and Twin x 2 Back-draft shutter MCA B D C F A M E B N O L D O2 L2 D C A Model type A B C D E F L L 2 M N O O 2 Twin Twin , Twin-5 (15) Twin-5 (16) Twin Twin Twin Twin Model Type A Ø B C Ø D 25 17,5 111,5 31,5 994, ,5 136,5 31,5 119,5 5/15 121,5 163,5 35,5 147,5 5/16 121,5 173,5 35,5 157, ,5 214,5 35,5 197,5 1/13 164,5 264,5 42,5 248,5 2 25,5 33,5 5,5 312,5 TD x 3 Model Type A G 1 G 2 L TD x 3-35/ TD x 3-5/ TD x 3-5/ G2 A L G1 TD x 3-8/ TD x 3-1/ TD x 3-13/ Rectangular adapter MAR F A E B ø G C Type A B C E F Ø G 25/ , / , / , / , / , /25-13/ , / ,

11 Acoustic characteristics Sound Power Level Spectrum (db(a) at octave average frequencies (Hz), measured at the fan discharge. Fan Type TD-16/ TD-25/ TD-35/ TD-5/ TD-5/ TD-8/2-N TD-8/ TD-1/ TD-13/ TD-2/ Sound Power Level Spectrum (db(a) at octave average frequencies (Hz), measured outside the fan casing (radiated noise). Fan Type TD-16/ TD-25/ TD-35/ TD-5/ TD-5/ TD-8/2-N TD-8/ TD-1/ TD-13/ TD-2/ Sound Power Level Spectrum (db(a) at octave average frequencies (Hz), measured at the fan discharge. Fan Type Twin x Twin x Twin x 2-8 N Twin x Twin x Twin x Sound Power Level Spectrum (db(a) at octave average frequencies (Hz), measured outside the fan casing (radiated noise). Fan Type Twin x Twin x Twin x 2-8 N Twin x Twin x Sound Power Level Spectrum (db(a) at octave average frequencies (Hz), measured at the fan discharge. Fan Type Twin x 3-35/ Twin x 3-5/ Twin x 3-5/ Twin x 3-8/2 N Twin x 3-8/ Twin x 3-1/ Twin x 3-13/ Twin x Sound Power Level Spectrum (db(a) at octave average frequencies (Hz), measured outside the fan casing (radiated noise). Fan Type Twin x 3-35/ Twin x 3-5/ Twin x 3-5/ Twin x 3-8/2 N Twin x 3-8/ Twin x 3-1/ Twin x 3-13/

12 MIXVENT-TD FAN KITS TD-16/1N TD-25/1 TD-25/1T Description The TD extractor fan ventilation kits enable the simple and fast installation of a complete ventilation system. The kits include the powerful TD in-line fan providing efficient extraction for bathrooms, toilets, washrooms and any other applications that require the removal of bad odours, stuffy and humid air. In addition to the fan the kits include an interior circular air valve (BOC-1); exterior mounted grille (GR-1); three meters of flexible aluminium ducting (GSA-1) and a roll of tough ducting tape to provide the complete hardware required for a given ventilation system. NEW Extractor fans TD-16/1N TD-25/1 TD-25/1T The TD range of in-line fans incorporate powerful mixed flow impellers which enable efficient and very quiet extraction against the pressures caused by ducting and grilles. Model TD-25/1T incorporates a Run-On- Timer facility which can be adjustable between 1 to 3 minutes. (factory set to 15 mins) TD-16/1N TD-25/1 TD-25/1T The TD range has been specifically designed with an integrated mounting support which enables the fast installation and access to the motor / impeller assembly without having to remove or disturb the adjoining ducting. Technical characteristics Model Type Nom. Power abs. Maximum Duty Maximum Sound Weight speed at free current at free operating pressure discharge discharge temperature level (r.p.m.) (W) (A) (m 3 /h) (ºC) (db(a)) (kg) TD-16/1N 25 35, ,4 TD-25/1 TD-25/1T 18 89, , Installation TD-16/1N TD-25/1 TD-25/1T GR-1 BOR-1 Accessories included in Kit GSA-1 Flexible aluminium tubing with adhesive duct tape GR-1 Exterior mounted grille BOC-1 Interior circular air valve. 175

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range

More information

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester

More information

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to

More information

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).

More information

MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN

MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN MODEL FEATURES Exhaust air up to 2,630 CFM with static pressure capabilities to 1 w.g. Mixed flow impeller for excellent air flow to pressure performance ratio Direct connection, two-speed motor Ideal

More information

MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN

MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN MODEL FEATURES Exhaust air up to 2,630 CFM with static pressure capabilities to 1 w.g. Mixed flow impeller for excellent air flow to pressure performance ratio

More information

CENTRIFUGAL IN-LINE FANS VENT Series

CENTRIFUGAL IN-LINE FANS VENT Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.

More information

VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot

VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction

More information

Inline Fans Options Featuring TD-MIXVENT/TD-SILENT

Inline Fans Options Featuring TD-MIXVENT/TD-SILENT Inline Fans Options Featuring TD-MIXVENT/TD-SILENT Featuring Vent Lights and Premium Grilles The World s Leading Producer of Air Movement Products TD_0116 January 2016 Table of Contents Overview TD-MIXVENT

More information

TD-ECOWATT AND DECOR-ECOWATT Series

TD-ECOWATT AND DECOR-ECOWATT Series S&P presents its new ranges of domestic and commercial fans with DC motors TD-ECOWATT AND DECOR-ECOWATT Series Up to 55% savings in energy consumption Reduced CO 2 emissions Improvement of the environment

More information

TD-SILENT Series (160 to 1000 models)

TD-SILENT Series (160 to 1000 models) IN-LINE MIXED LOW DUT ANS ultra-quiet Series (1 to models) Low profile Mixed-flow fans with sound-absorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD-3, TD-, TD-8 and

More information

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel

More information

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The

More information

Practical examples of installation in the TD range

Practical examples of installation in the TD range Practical examples of installation in the TD range The TD-MIXVENT system offers the most versatile installation range on the market, as a result of its multiple combinations; it can be used in a large

More information

ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans

ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and

More information

Inline Fans Options Featuring TD-MIXVENT/TD-SILENT

Inline Fans Options Featuring TD-MIXVENT/TD-SILENT Inline Fans Options Featuring TD-MIXVENT/TD-SILENT Advancing Ventilation Featuring Vent Lights and Premium Grilles The World s Leading Producer of Air Movement Products TD_0218 February 2018 Table of Contents

More information

ACOUSTIC CABINET FANS CVAB / CVAT Series

ACOUSTIC CABINET FANS CVAB / CVAT Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models

More information

EDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc

EDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 Ceiling or wall mounting extract ventilation Extract ventilation through wall or using a shunt duct system All V models incorporate all accessories

More information

CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.

CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers. ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic

More information

EDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM

EDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 0 015982 603071 Installation examples Ceiling or wall mounting Extract ventilation through short duc extract ventilation Extract ventilation

More information

BATHROOM EXTRACT FANS DECOR-100 Series

BATHROOM EXTRACT FANS DECOR-100 Series DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon

More information

IN-LINE CENTRIFUGAL DUCT FANS VT Series

IN-LINE CENTRIFUGAL DUCT FANS VT Series IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range

More information

ACOUSTIC CABINET FANS CVB / CVT Series

ACOUSTIC CABINET FANS CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive

More information

supplied in Form (B) configuration. Airflow over Impeller- Motor.

supplied in Form (B) configuration. Airflow over Impeller- Motor. CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,

More information

Short casing. Long casing (L version) Commercial premises

Short casing. Long casing (L version) Commercial premises CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled

More information

ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box

ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All

More information

ROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling

ROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength

More information

Ultra-quiet circular duct fans TD-SILENT ECOWATT Series

Ultra-quiet circular duct fans TD-SILENT ECOWATT Series TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan

More information

MIXVENT-TH Series Mixed Flow Fans

MIXVENT-TH Series Mixed Flow Fans ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured

More information

MVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web:

MVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web: MV S.r.l. Via San Giovanni osco, 12-15121 Alessandria Tel. +39 131 68.73 - ax +39 131 56.334 Web: www.mvf.it -mail: info@mvf.it IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series TD-SILNT - MOD 16 TO

More information

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with

More information

CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts

CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal

More information

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced. LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a

More information

ROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling

ROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for

More information

TD-SILENT range, the quietest fans in the world in their class

TD-SILENT range, the quietest fans in the world in their class TD-SILNT IN-LIN MIXD LOW DUT NS ULTR-QUIT TD-SILNT Series NW Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed

More information

ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series

ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air

More information

MTD Silent Series MIXED FLOW IN-LINE DUCT FAN

MTD Silent Series MIXED FLOW IN-LINE DUCT FAN MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General

More information

DIRECT-AIR ILB / ILT Series Rectangular duct fans

DIRECT-AIR ILB / ILT Series Rectangular duct fans IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller

More information

Versatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits

Versatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent insulation and manufactured with an adjustable

More information

TD-SILENT range, the quietest fans in the world in their class

TD-SILENT range, the quietest fans in the world in their class IN-LIN MIXD LOW DUT NS ULTR-QUIT Series NW 44682 314 Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed internal

More information

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard, RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from

More information

CMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced

CMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC

More information

SILENT MV Ultra Quiet In-line Fans

SILENT MV Ultra Quiet In-line Fans Ultra Quiet In-line Fans 5 IP44 2 YEAR GUARANTEE Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent

More information

COMPACT Series type HCFB / HCFT (Plastic impellers)

COMPACT Series type HCFB / HCFT (Plastic impellers) Plate mounted axial flow fans COMPACT HCFB/HCFT PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT (Plastic impellers) 0 017582 603079 Compact design Corrosion resistance Flame retardant terminal

More information

Performance. Sound Levels. Impellers. Motors. Accessories

Performance. Sound Levels. Impellers. Motors. Accessories EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class

More information

Single-inlet centrifugal fans

Single-inlet centrifugal fans CE 200-280 4-pole Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable CE fans are easy to install. Fans in this series have impellers with forward-curved

More information

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information. In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V

More information

Sabre Plate Mounted Sickle Fans (VSP)

Sabre Plate Mounted Sickle Fans (VSP) Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation

More information

CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT

CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range

More information

GigaBox centrifugal fans Product specific information

GigaBox centrifugal fans Product specific information GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,

More information

Centrifugal performance characteristics with axial flow pattern: RADAX VAR

Centrifugal performance characteristics with axial flow pattern: RADAX VAR High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers

More information

Plate mounted axial flow fans HXBR / HXTR Series

Plate mounted axial flow fans HXBR / HXTR Series Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester

More information

Shhhhhhhhhhh! Here there is silence.

Shhhhhhhhhhh! Here there is silence. TD SILENT RANGE Shhhhhhhhhhh! Here there is silence. New TD Silent range. The world s most quiet fans in its class. TD SILENT range: A leap in time. S&P, a world leader in ventilation, presents the world

More information

Fan - Powered Terminal Unit Series Flow

Fan - Powered Terminal Unit Series Flow 5/22/M/1 Fan - Powered Terminal Unit Series Flow Type TFP Trox (Malaysia) Sdn Bhd 20 Persiaran Bunga Tanjung 1 Senawang Land Industrial Park 70400 Seremban Negeri Sembilan Darul Khusus Malaysia Telephone

More information

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1. xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof

More information

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester

More information

MegaBox Product-specific information

MegaBox Product-specific information MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions

More information

Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ

Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3

More information

CVHT Series - F rated cabinet fans

CVHT Series - F rated cabinet fans N 50-55 1/1/08 19:26 Página 50 BLT DRIVN BINT NS Series - 00 120 rated cabinet fans NW pproved to N12101- standard Range of belt drive cabinet fans designed for smoke extraction in fire conditions and

More information

Axial fans. What s more, non-stock models are normally available within two weeks.

Axial fans. What s more, non-stock models are normally available within two weeks. Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive

More information

400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet

400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for

More information

Acoustic Twin Fans (ATQ)

Acoustic Twin Fans (ATQ) Acoustic Twin Fans (ATQ) Features and Benefits Available in sizes from 100 to 500mm dia 50mm Acoustically treated housing, Class O rated, self extinguishing, zero burn rate, resists ignition, no toxic

More information

HIGH TEMPERATURE TWIN SQUIF FANS

HIGH TEMPERATURE TWIN SQUIF FANS HIGH TEMPERATURE FANS HIGH TEMPERATURE FOR SMOKE EXTRACT CERTIFIED TO EN12101-3-2002. 374 029 2085 8200 BENEFITS QUIET AND POWERFUL SOLUTIONS High performance centrifugal motor/impeller combination providing

More information

BELT DRIVEN CABINET FANS CVTT Series

BELT DRIVEN CABINET FANS CVTT Series Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal

More information

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.

More information

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators

More information

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7 CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound

More information

Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors

Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)

More information

Mixed Flow Roof Fans (RMH)

Mixed Flow Roof Fans (RMH) Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard

More information

CHMT Series, F Rated Fans

CHMT Series, F Rated Fans CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke

More information

Vent-Axia Sabre Sickle Roof Fans (VSR)

Vent-Axia Sabre Sickle Roof Fans (VSR) Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,

More information

plates and with flexible conduit. Ø Outlet (mm)

plates and with flexible conduit. Ø Outlet (mm) SELF-ADJUSTING VALVES BAR ALIZE Self-adjusting exhaust valves Wide range of self-adjusting exhaust valves, manufactured from injection moulded white polystyrene. Designed for kitchen, bathrooms and toilet

More information

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity 400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,

More information

Medium Pressure Centrifugal Fans

Medium Pressure Centrifugal Fans Medium Pressure Centrifugal Fans 2012 Edition ...About Axair Fans UK Application Knowledge: Over 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Stock

More information

AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:

AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average

More information

Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.

Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones. CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal

More information

CGT Series Adjustable Pitch Fans

CGT Series Adjustable Pitch Fans AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel

More information

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured

More information

Multifunctional 400ºC/2h and 300ºC/2h roof fans

Multifunctional 400ºC/2h and 300ºC/2h roof fans HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544

More information

Mixed Flow Roof Fans (RMH)

Mixed Flow Roof Fans (RMH) Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard

More information

Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572

Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572 FEATURES Computer designed, efficient performance, forward curved blower. Blower wheel hub is secured to the shaft with a locking keyway. Blower is secured to anti-vibration mounts within the cabinet.

More information

BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series

BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the

More information

ROOF MOUNTED FANS MAX-TEMP Series, Centrifugal 400 ºC/2h Rated Fans

ROOF MOUNTED FANS MAX-TEMP Series, Centrifugal 400 ºC/2h Rated Fans ROOF MOUNTD FANS MAX-TMP Series, entrifugal 400 º/2h Rated Fans Description - Applications The MAX-Temp range of roof extract fans are available in horizontal (TH-THT) or vertical (TV-TVT) discharge formats,

More information

AC Commercial Fans Edition. ErP ready

AC Commercial Fans Edition. ErP ready AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application

More information

CGT Series Adjustable Pitch Fans

CGT Series Adjustable Pitch Fans AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel

More information

Dynamically-balanced impellers with extremely robust cores CMP T 5.5

Dynamically-balanced impellers with extremely robust cores CMP T 5.5 Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.

More information

High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable

High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable KD High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable Electrical accessories S-ET p. 341 The KD series have external rotor

More information

CA V0 E RANGE In-line centrifugal fans in self-extinguishing plastic

CA V0 E RANGE In-line centrifugal fans in self-extinguishing plastic new CA V E RANGE In-line centrifugal fans in self-extinguishing plastic Suitable for the continuous or intensive ventilation of medium or large domestic, commercial or industrial environments. 7 models:

More information

The Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans

The Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular

More information

Uniclass L7534. Manufacture controlled to ISO9001

Uniclass L7534. Manufacture controlled to ISO9001 CABINET & TWIN FANS FOR INDUSTRIAL / COMMERCIAL USE "ACFS" - Quiet Duct Centrifugal - Single Fan "DMTSQ" - Quiet Duct Centrifugal - Twin Fan "RMS" - Roof Centrifugal - Single Fan "RMTS" - Roof Centrifugal

More information

CSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller

CSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys

More information

Chassis Access Fans Motors Speed Control Coils The Condensate Tray Insulation Spigots Controls Enclosure Control Valves Filters Rev A

Chassis Access Fans Motors Speed Control Coils The Condensate Tray Insulation Spigots Controls Enclosure Control Valves Filters Rev A Chassis panelwork is all In House manufactured from nominally 1.2mm Galvanised steel. Where at all possible, flanges are formed inward facing to prevent exposure to bare metal edges. Sufficient forms and

More information

VORTICENT C E RANGE Centrifugal fans

VORTICENT C E RANGE Centrifugal fans NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,

More information

WINDER. Impellers with higher efficiency and less sound level

WINDER. Impellers with higher efficiency and less sound level WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.

More information

KV sileo 100 M. Circular duct fans. Circular duct fans

KV sileo 100 M. Circular duct fans. Circular duct fans KV sileo 100 M Speed-controllable Integral thermal contacts Can be installed in any position Can be installed outdoors Maintenance-free and reliable Electrical accessories RE p. 20 The K series is designed

More information

PACKAGE UNIT PCA340U TECHNICAL SELECTION DATA. -10 o C UNIT FEATURES SPECIFICATION SUMMARY UNIT OPTIONS CONTROL OPTIONS UNIT COMPLIANCE.

PACKAGE UNIT PCA340U TECHNICAL SELECTION DATA. -10 o C UNIT FEATURES SPECIFICATION SUMMARY UNIT OPTIONS CONTROL OPTIONS UNIT COMPLIANCE. TECHNICAL SELECTION DATA PACKAGE UNIT + o C -10 o C 3 THREE PHASE SCROLL TWO STAGE CENTRIFUGAL LOUVRE LIANT SCROLL RESSOR AXIAL UNIT FEATURES SPECIFICATION SUMMARY Scroll Compressor Multiple Speed Outdoor

More information

CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation

CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in

More information

Square Mixed Flow Fans (MFQ)

Square Mixed Flow Fans (MFQ) Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are

More information

Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).

Specifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and

More information

IN-LINE RECTANGULAR FANS IRB / IRBS IRB

IN-LINE RECTANGULAR FANS IRB / IRBS IRB IN-LINE RECTANGULAR FANS IRB / IRBS IRB IN-LINE RECTANGULAR FANS IRB / IRBS IRB and IRBS are a compact series of centrifugal type exhaust and supply in-line duct fans for air conditioning systems. They

More information