supplied in Form (B) configuration. Airflow over Impeller- Motor.
|
|
- Bertha O’Connor’
- 5 years ago
- Views:
Transcription
1 CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests, an extremely compact design created by the combination of an internal rotor motor with factory matched direct drive wrap around impeller hub. This very low profile design optimises airflow performance whilst minimising noise generation. The Compact Cased Axial Fan series require an absolute minimum of space for any given duct mounted installation. Designed to be installed in-line within a ducted ventilation system; the Compact Cased Axial Fan series are suitable for use within a wide range of residential, coercial and industrial ducted ventilation applications. Construction All COMPACT Cased Axial Fans feature cylindrical flanged casings (ISO 1940) manufactured from high grade rolled galvanised steel. The motor and fan impeller are supported within this casing by a strong electrowelded steel support frame. This whole assembly is protected by a two stage cataforesis primer and tough black polyester paint finish. This particular coating has been evaluated as being suitable for Outdoor Equipment usage, by Underwriters Laboratories, Inc (USA). All models are supplied with a pre-wired wiring junction box located on the outside of the fan casing (models 250 /6-710) or on the motor (models / ) for easy wiring access. This wiring junction box protects all wiring connections against the ingress of dust and moisture. IP65 Rated*. All standard Compact Cased Axial Fans are Supply voltages and frequencies Applications The Compact Cased Axial Fans have been specifically designed for installation within ducted ventilation systems where the fan is supported on both sides. The robust construction features enable the Compact Cased Axial Fans to be used for a wide variety of ducted ventilation applications, including: General ventilation of coercial and industrial premises. Warehouse and storage ventilation. Garages and public buildings. Special Ventilation Applications Smoke Extract. See Special Versions. supplied in Form (B) configuration. Airflow over Impeller- Motor. Motors All Compact Cased Axial fans incorporate asynchronous induction motors with a squirrel cage rotor. All motors are manufactured in accordance with UNE-113 and CEI-34-1 standards. The motor casings are constructed from die cast aluminium with integrated cooling fins and finished with a tough (black) weatherproof polyester paint. As standard, the Compact Cased Axial fans incorporate the following motor specifications: IP65 (IP55 for models 2-315, 2-355, 800 and 1000). Class F Insulation (-40ºC to +70ºC working temperatures). Suitable for usage in environments up to 95% RH. The range The Compact Cased Axial fan is available in ten (10) standard nominal diameters from 250 to 800, and depending upon the model are fitted with single and three phase motors in 2, 4, 6 & 8 pole. Air volume performance ranges from 1,150 to 43,200 m 3 /hr. Before installation, it is important to check that the product electrical characteristics listed on the data plate label (voltage, power, frequency etc), match those of the intended electrical supply. IP 65* * IP55: Models 2-315, 2-355, 800 and Speed Controllable (except 2 pole models, /4-560/H, /4-630, 710 & 800 and special Certified models using Increased Safety EExeIIT3/5 Motors). Three Phase models can be supplied to special order for use with frequency inverters speed controllers. Please enquire. PG-11 conduit connection to wiring junction box. Thermal protection. Motors can be supplied suitable for the following electrical supplies: Single Phase 230V 50 Hz Three Phase 230/400V 50 Hz Three Phase 400V 50Hz. For other special voltages and frequencies, please enquire. All single phase motors are supplied complete with a capacitor which is located inside the wiring junction box. Main supply voltage Motor Motor connection Speed SINGLE PHASE V 50Hz 230V 50Hz High THREE PHASE V 230/400V 50Hz 50Hz High Low* THREE PHASE 230/400V 50Hz High V High 50Hz 400V 50Hz Low* * From sizes 450 up to 630/L diameter. 40
2 Reference T C B T / / H - B V 5 0 Hz T: Compact Cased Axial fan 2 - C: Series designation 3 - Impeller type: F: Ø 250-Ø 630, single part plastic impeller and hub. B: Ø 250-Ø 400, single part aluminium impeller and hub. Ø 450-Ø 800, separate aluminium impeller with aluminium hub. 4 - Electrical Connection: 3 -B: Single Phase 3 -T: Trhree Phase 5 - Number of Poles (fan speed): 3 2: (approx r.p.m Hz) 4: (approx r.p.m Hz) Acoustic characteristics 6: (approx. 900 r.p.m Hz) 8: (approx. 700 r.p.m Hz) 6 - : Nominal Diameter of fan. (). 7 - : Pitch Angle 8 - Direction of Air: A: Motor-impeller B: Impeller-Motor 9 - Voltage 230 V (Single Phase) 230/400 V (Three Phase) 400 V (Three Phase) 10 - Frequence of Service: 50 Hz 60 Hz The sound levels NPS- illustrated in the tabulated performance data for the S&P COMPACT Cased Axial fans, correspond to the value of sound pressure db(a), measured in free field conditions at a distance equivalent to three times the diameter of the impeller or a minimum of 1.5 meters whichever is the greater. Sound power level spectrum in db(a) at the corresponding octave band averages. LwA ASP QMAX /H /H /H LwA ASP QMAX /H /H /H /H /H /H /L /H /L /H /L /H /L /K /G /H Special Construction. (Please enquire) 2 V: Two Speed Motors Models can be supplied with Dahlander 4/8 pole motors. Models can also be supplied with Dahlander 6/12 pole motors. Please enquire. C: Condensation Protected Ex: Explosion proof versions in accordance to ATEX Directive, for three phase models: - Increased safety II2G EExeIIT3 - Flame proof, only for models /4-710, /4-800, /6-800, /8-800 II2G EExdIIBT5 or EExdIICT4 LwA ASP QMAX /H /H /H /H /L /H /L /H /L /H /L /K /G /H LwA ASP QMAX /H /H /H /H /H /L /K /G /H
3 Technical characteristics for models with ALUMINIUM impellers Model Type Speed Maximum Maximum Sound Maximum Weight Speed* power current pressure air controller absorbed (A) level volume (r.p.m.) (W) at 230 V at 400 V (db(a)) (m 3 /h) (kg) SINGLE PHASE 2 POLES TCBB/2-250/H , ,0 TCBB/2-315/H (0,37 kw) , ,0 TCBB/2-355/H (0,55 kw) , ,0 SINGLE PHASE 4 POLES TCBB/4-250/H , ,0 REB-1 TCBB/4-315/H , ,0 REB-1 TCBB/4-355/H , ,2 REB-2,5 TCBB/4-400/H , ,5 REB-2,5 TCBB/4-450/H , ,0 REB-5 TCBB/4-500/H , ,0 REB-5 TCBB/4-560/L , ,0 RMB-8 TCBB/4-560/H , ,7 TCBB/4-630/L , ,0 SINGLE PHASE 6 POLES TCBB/6-355/H , ,2 REB-1 TCBB/6-400/H , ,5 REB-1 TCBB/6-450/H , ,7 REB-2,5 TCBB/6-500/H , ,8 REB-2,5 TCBB/6-560/L , ,0 REB-5 TCBB/6-560/H , ,5 REB-5 TCBB/6-630/L , ,0 REB-5 TCBB/6-630/H , ,5 RMB-8 TCBB/6-710/L , ,0 TCBB/6-710/H , ,0 SINGLE PHASE 8 POLES TCBB/8-450/H , ,7 REB-1 TCBB/8-500/H ,8 REB-2,5 TCBB/8-560/H , ,0 REB-2,5 TCBB/8-630/H , ,5 REB-2,5 TCBB/8-710/H , ,0 THREE PHASE 2 POLES TCBT/2-250/H ,9 0, ,0 TCBT/2-315/H (0,37 kw) ,1 1, ,0 TCBT/2-355/H (0,55 kw) ,1 1, ,0 THREE PHASE 4 POLES TCBT/4-250/H ,3 0, ,0 RMT-1,5 TCBT/4-315/H ,6 0, ,0 RMT-1,5 TCBT/4-355/H ,8 0, ,2 RMT-1,5 TCBT/4-400/H ,4 0, ,5 RMT-1,5 TCBT/4-450/H ,7 1, ,0 RMT-3,5 TCBT/4-500/H ,9 1, ,0 RMT-3,5 TCBT/4-560/L ,9 2, ,0 RMT-8 TCBT/4-560/H ,9 2, ,7 TCBT/4-630/L ,6 3, ,0 TCBT/4-630/H ,1 4, ,0 TCBT/4-710/L (1,5kW) ,4 4, ,0 TCBT/4-710/H (3kW) ,1 6, ,0 TCBT/4-800/L (3kW) ,2 6, ,0 TCBT/4-800/K (4kW) , ,0 TCBT/4-800/G (5,5kW) , ,0 TCBT/4-800/H (7,5kW) , ,0 THREE PHASE 6 POLES TCBT/6-355/H ,5 0, ,2 RMT-1,5 TCBT/6-400/H ,5 0, ,5 RMT-1,5 TCBT/6-450/H ,9 0, ,7 RMT-1,5 TCBT/6-500/H ,0 0, ,8 RMT-1,5 TCBT/6-560/L ,6 0, ,0 RMT-3,5 TCBT/6-560/H ,7 1, ,5 RMT-3,5 TCBT/6-630/L ,2 1, ,0 RMT-3,5 TCBT/6-630/H ,9 2, ,5 RMT-8 TCBT/6-710/L ,7 3, ,0 TCBT/6-710/H ,2 3, ,0 TCBT/6-800/L (1,1kW) ,7 3, ,0 TCBT/6-800/K (1,5kW) ,1 4, ,0 TCBT/6-800/G (2,2kW) ,0 5, ,0 TCBT/6-800/H (3kW) ,7 6, ,0 THREE PHASE 8 POLES TCBT/8-450/H ,8 0, ,7 RMT-1,5 TCBT/8-500/H ,0 0, ,8 RMT-1,5 TCBT/8-560/H ,2 0, ,0 RMT-1,5 TCBT/8-630/H ,9 1, ,5 RMT-3,5 TCBT/8-710/H ,1 1, ,0 TCBT/8-800/L (0,37kW) ,1 1, ,0 TCBT/8-800/K (0,55kW) ,3 2, ,0 TCBT/8-800/G (0,75kW) ,8 2, ,0 TCBT/8-800/H (1,1kW) ,2 3, ,0 * It is recoended to wire the RMT speed controllers at 3x400V. 42
4 Technical characteristics for models with PLASTIC impellers Model Type Speed Maximum Maximum Sound Maximum Weight Speed* power current pressure air controller absorbed (A) level volume (r.p.m.) (W) a 230 V a 400 V (db(a)) (m 3 velocidad /h) (kg) SINGLE PHASE 2 POLES TCFB/2-250/H , SINGLE PHASE 4 POLES TCFB/4-250/H , REB-1 TCFB/4-315/H , REB-1 TCFB/4-355/H , REB-2,5 TCFB/4-400/H , REB-2,5 TCFB/4-450/H , REB-2,5 TCFB/4-500/H , REB-5N TCFB/4-560/H , REB-5N TCFB/4-630/H , SINGLE PHASE 6 POLES TCFB/6-355/H , REB-1 TCFB/6-400/H , REB-1 TCFB/6-450/H , REB-2,5 TCFB/6-500/H , REB-2,5 TCFB/6-560/H , REB-2,5 TCFB/6-630/H , REB-5N SINGLE PHASE 8 POLES TCFB/8-450/H , REB-1 TCFB/8-500/H , REB-1 TCFB/8-560/H , REB-2,5 TCFB/8-630/H , REB-2,5 THREE PHASE 2 POLES TCFT/2-250/H ,9 0, THREE PHASE 4 POLES TCFT/4-250/H ,3 0, RMT-1,5 TCFT/4-315/H ,6 0, RMT-1,5 TCFT/4-355/H ,8 0, RMT-1,5 TCFT/4-400/H ,4 0, RMT-1,5 TCFT/4-450/H ,7 1, RMT-1,5 TCFT/4-500/H ,7 1, RMT-3,5 TCFT/4-560/H ,9 2, RMT-3,5 TCFT/4-630/H ,2 3, THREE PHASE 6 POLES TCFT/6-355/H ,5 0, RMT-1,5 TCFT/6-400/H ,5 0, RMT-1,5 TCFT/6-450/H ,8 0, RMT-1,5 TCFT/6-500/H ,9 0, RMT-1,5 TCFT/6-560/H ,6 0, RMT-1,5 TCFT/6-630/H ,0 1, RMT-1,5 THREE PHASE 8 POLES TCFT/8-450/H ,7 0, RMT-1,5 TCFT/8-500/H ,7 0, RMT-1,5 TCFT/8-560/H ,0 0, RMT-1,5 TCFT/8-630/H ,3 0, RMT-1,5 * It is recoended to wire the RMT speed controllers at 3x400V. 43
5 Technical characteristics for models with 200 2h motors Model Type Speed Max. abs. Max. abs. Sound Max. air Weight power current pres. level volume (r.p.m.) (W) (A) at 400 V (db(a)) (m 3 /h) (kg) THREE PHASE 4 POLES TCBT/4-450/H-E , ,0 TCBT/4-500/H-E , ,0 TCBT/4-560/L-E , ,0 TCBT/4-560/H-E , ,7 TCBT/4-630/L-E , ,0 TCBT/4-630/H-E , ,0 TCBT/4-710/L-E ,5 kw* 3, ,0 TCBT/4-710/H-E , kw* 6, ,0 TCBT/4-800/L-E , kw* 6, ,0 TCBT/4-800/K-E , kw* 8, ,0 TCBT/4-800/G-E ,5 kw* 11, ,0 TCBT/4-800/H-E ,5 kw* 14, ,0 THREE PHASE 6 POLES TCBT/6-450/H-E , ,7 TCBT/6-500/H-E , ,8 TCBT/6-560/L-E , ,0 TCBT/6-560/H-E , ,5 TCBT/6-630/L-E , ,0 TCBT/6-630/H-E , ,5 TCBT/6-710/L-E , ,0 TCBT/6-710/H-E , ,0 TCBT/6-800/L-E ,1 kw* 3, ,0 TCBT/6-800/K-E ,5 kw* 3, ,0 TCBT/6-800/G-E ,2 kw* 5, ,0 TCBT/6-800/H-E , kw* 6, ,0 THREE PHASE 8 POLES TCBT/8-450/H-E , ,7 TCBT/8-500/H-E , ,8 TCBT/8-560/H-E , ,0 TCBT/8-630/H-E , ,5 TCBT/8-710/H-E , ,0 TCBT/8-800/L-E ,37 kw* 1, ,0 TCBT/8-800/K-E ,55 kw* 2, ,0 TCBT/8-800/G-E ,75 kw* 2, ,0 TCBT/8-800/H-E ,1 kw* 3, ,0 THREE PHASE 2 SPEED (4/8 POLES) TCBT/4/8-450/H-E / / 140 W 1,6 / 0,5 62, ,0 TCBT/4/8-500/H-E / / 165 W 1,7 / 0,6 66, ,0 TCBT/4/8-560/L-E / / 200 W 2,3 / 0,6 67, ,0 TCBT/4/8-560/H-E / / 250 W 2,8 / 0,7 69, ,7 TCBT/4/8-630/L-E / / 330 W 3,2 / 0,9 69, ,0 TCBT/4/8-630/H-E / / 380 W 4,0 / 1,1 70, ,0 TCBT/4/8-710/L-E / 700 1,7 / 0,35 kw* 4,0 / 1,6 73, ,0 TCBT/4/8-710/H-E / 720 3,0 / 0,65 kw* 6,8 / 2,5 76, ,0 TCBT/4/8-800/L-E / 720 3,0 / 0,65 kw* 6,8 / 2,5 82, ,0 TCBT/4/8-800/K-E / 695 3,7 / 1,0 kw* 8,2 / 3,2 84, ,0 TCBT/4/8-800/G-E / 715 5,2 / 1,35 kw* 10,0 / 3,7 87, ,0 TCBT/4/8-800/H-E / 715 8,4 / 2,05 kw* 16,2 / 6,5 89, ,0 THREE PHASE 2 SPEED (6/12 POLES) TCBT/6/12-450/H-E / / 40 W 0,5 / 0,2 53, ,7 TCBT/6/12-500/H-E / / 50 W 0,6 / 0,3 57, ,8 TCBT/6/12-560/L-E / / 75 W 0,9 / 0,4 58, ,0 TCBT/6/12-560/H-E / / 85 W 1,0 / 0,5 60, ,5 TCBT/6/12-630/L-E / / 110 W 1,3 / 0,6 60, ,0 TCBT/6/12-630/H-E / / 150 W 2,8 / 1,1 62, ,5 TCBT/6/12-710/L-E / / 195 W 2,8 / 1,1 66, ,0 TCBT/6/12-710/H-E / / 230 W 3,0 / 1,2 69, ,0 TCBT/6/12-800/L-E / 470 0,9 / 0,16 kw* 2,6 / 0,96 74, ,0 TCBT/6/12-800/K-E / 460 1,3 / 0,2 kw* 3,5 / 1,2 76, ,0 TCBT/6/12-800/G-E / 470 2,2 / 0,37 kw* 5,6 / 2,2 79, ,0 TCBT/6/12-800/H-E / 470 4,0 / 0,75 kw* 9,4 / 3,4 80, ,0 * Motor power. 44
6 Installation Flexible connector Wire guard Wire guard Flexible connector Wire guard Inlet Discharge Matching Flexible Mounting Type (impeller side) (motor side) flange connector feet TCBB / TCBT 250 DEF-250 T DEF-250 T BRIDA-250 ACOP-250 PIE-250 TCBB / TCBT 315 DEF-315 T DEF-315 T BRIDA-315 ACOP-315 PIE-315 TCBB / TCBT 355 DEF-355 T DEF-355 T BRIDA-355 ACOP-355 PIE-355 TCBB / TCBT 400 DEF-400 T DEF-400 T BRIDA-400 ACOP-400 PIE-400 TCBB / TCBT 450 DEF-450 T DEF-450 T BRIDA-450 ACOP-450 PIE-450 TCBB / TCBT 500 DEF-500T DEF-500T BRIDA-500 ACOP-500 PIE-500 TCBB / TCBT 560 DEF-560 T DEF-560 T BRIDA-560 ACOP-560 PIE-560 TCBB / TCBT 630 DEF-630 T DEF-630 T BRIDA-630 ACOP-630 PIE-630 TCBT 4-710/H DEF-710 T DEF-710/H-T DESC. BRIDA-710 ACOP-710 PIE-710 TCBT 4-710/L DEF-710 T DEF-710/L-T DESC. BRIDA-710 ACOP-710 PIE-710 TCBB / TCBT DEF-710 T DEF-710 T BRIDA-710 ACOP-710 PIE-710 TCBB / TCBT DEF-710 T DEF-710 T BRIDA-710 ACOP-710 PIE-710 TCBT 800 DEF-800 T DEF-800 T DESC*. BRIDA-800 ACOP-800 PIE-800 * For DEF-800 T outlet, see page 82. Dimensions () Form B No. of Type Ø A B C Ø D Ø E holes Ø D Duct Matching flange Mounting feet Matching flange 2 poles Duct N Modelos TCBT-B/2-315 TCBT-B/2-355 N Ø E Ø B Ø D 710 (6 & 8 poles) A C Form B E Type Ø A B C Ø D 4 poles 6 poles 8 poles 710/L (4 poles) /H (4 poles) /L /K /G /H
7 Performance curves - TCBB/TCBT Series Q = Air volume in, m 3 /hr and m 3 /s Pe = Static pressure in and Pa. Dry air at 20 ºC and 760 Hg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE Performance curve characteristics for the Compact Cased Axial fans with plastic impellers (TCFB/T) correspond with the curves illustrated for the Compact Plate Axial fans (pages 20 to 25). Typical fan selection: Do not select an airflow performance in the area of the graph left of the dashed line (as shown to the right coloured area). To find the working point of the fan at a required volume, it is first necessary to plot a system resistance curve. The working point of the fan lies at the intersection of the system resistance curve and that of the fan performance curve as illustrated to the right. Example: Required air volume 13,100 m 3 /hr at 18.c.a Fan Working Point 14,150 m 3 /hr at 21.c.a Do Not Select a Fan with a Working Point in this Area Required Air Volume System Resistance Curve Working Point of Fan 46
8 Performance curves - TCBB/TCBT Series Q = Air volume in, m 3 /hr and m 3 /s Pe = Static pressure in and Pa. Dry air at 20 ºC and 760 Hg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE
9 Performance curves - TCBB/TCBT Series Q = Air volume in, m 3 /hr and m 3 /s Pe = Static pressure in and Pa. Dry air at 20 ºC and 760 Hg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE
10 Performance curves - TCBB/TCBT Series Q = Air volume in, m 3 /hr and m 3 /s Pe = Static pressure in and Pa. Dry air at 20 ºC and 760 Hg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE
11 Performance curves - TCBB/TCBT Series Q = Air volume in, m 3 /hr and m 3 /s Pe = Static pressure in and Pa. Dry air at 20 ºC and 760 Hg. Air flow data in accordance with the following standards: UNE , BS 848, Part 1, AMCA and ASHRAE
HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationCOMPACT Series type HCFB / HCFT (Plastic impellers)
Plate mounted axial flow fans COMPACT HCFB/HCFT PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT (Plastic impellers) 0 017582 603079 Compact design Corrosion resistance Flame retardant terminal
More informationPLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More informationCGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
More informationCGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped
More informationTGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationCONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
More informationShort casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Additional Information Standard air direction: form (B) configuration (Impeller over ). models description: incorporated an "L" after blade pitch angle. E.g.
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationCMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationCMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C
BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured
More informationACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
More informationCYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More informationACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
More informationBELT DRIVEN CABINET FANS CVTT Series
Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal
More informationCHMT Series, F Rated Fans
CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke
More informationIn-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
More informationROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength
More informationCYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS
- ADJUSTABLE PITCH FANS Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish. All models incorporate
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationMultifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationMAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationCRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationSpecifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and
More informationTD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans
IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationCONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
More informationMedium Pressure Centrifugal Fans
Medium Pressure Centrifugal Fans 2012 Edition ...About Axair Fans UK Application Knowledge: Over 20 years experience in general air movement; including corrosive, explosive and hot fume handling. Stock
More informationCentrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
More informationDuct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
More informationAxial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
More informationCVHT Series - F rated cabinet fans
N 50-55 1/1/08 19:26 Página 50 BLT DRIVN BINT NS Series - 00 120 rated cabinet fans NW pproved to N12101- standard Range of belt drive cabinet fans designed for smoke extraction in fire conditions and
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationTerminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.
EuroSeries (ESR) Cowl & base moulded from recyclable polymeric material All sizes resistant to UV light Sizes 250 to 1000 dia are protected to IP54 Optional backdraught shutters and bird guard (250-630mm)
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationAAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
More informationCentrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
More informationAXIAL FANS Catalogue CN0050C01 May 2008
ADTA AXIAL FANS Catalogue CN0050C01 May 2008 ADTA AXIAL FANS Catalogue CN0050C01 May 2008 Construction Specifications Impellers: Breezax aerfoil blades are available in four types of material: Glass Reinforced
More informationSabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
More informationBifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
More informationAC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing
More informationROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for
More informationTD-ECOWATT AND DECOR-ECOWATT Series
S&P presents its new ranges of domestic and commercial fans with DC motors TD-ECOWATT AND DECOR-ECOWATT Series Up to 55% savings in energy consumption Reduced CO 2 emissions Improvement of the environment
More informationSection 4. Axial Fans - Section 4
Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationMIXVENT-TH Series Mixed Flow Fans
ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing
More informationVersatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits
Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent insulation and manufactured with an adjustable
More informationUniclass L7534. Manufacture controlled to ISO9001
CABINET & TWIN FANS FOR INDUSTRIAL / COMMERCIAL USE "ACFS" - Quiet Duct Centrifugal - Single Fan "DMTSQ" - Quiet Duct Centrifugal - Twin Fan "RMS" - Roof Centrifugal - Single Fan "RMTS" - Roof Centrifugal
More informationROOF MOUNTED FANS MAX-TEMP Series, Centrifugal 400 ºC/2h Rated Fans
ROOF MOUNTD FANS MAX-TMP Series, entrifugal 400 º/2h Rated Fans Description - Applications The MAX-Temp range of roof extract fans are available in horizontal (TH-THT) or vertical (TV-TVT) discharge formats,
More informationSize and Configurations
!!"#!""!"$%!!" &'()&('& AK Axial Flow Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed to operate with low noise emission and vibration that meets the stringent
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationCJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation
CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in
More information400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet
THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for
More informationBACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
More informationUltra-quiet circular duct fans TD-SILENT ECOWATT Series
TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan
More informationAxial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.
HCH HCH Extremely robust wall-mounted, axial or tubular fans Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor. Fan: Airflow direction from
More informationSquare Mixed Flow Fans (MFQ)
Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are
More informationExplanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.
AXIAL FANS Series Series K Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing with the air
More informationHIGH TEMPERATURE TWIN SQUIF FANS
HIGH TEMPERATURE FANS HIGH TEMPERATURE FOR SMOKE EXTRACT CERTIFIED TO EN12101-3-2002. 374 029 2085 8200 BENEFITS QUIET AND POWERFUL SOLUTIONS High performance centrifugal motor/impeller combination providing
More informationVent-Axia Sabre Sickle Roof Fans (VSR)
Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,
More informationNEW GENERATION SERIES
FEATURES The New Generation Series of axial roof units are fitted with adjustable pitch impellers enabling a wide performance range to be obtained from any one unit. Construction Galvanised steel base,
More informationSeries TDA DIRECT DRIVEN MODEL: TDA- 450/9AA/8-8/ / Construction. Airflow Direction
DIRECT DRIVEN Series TDA Construction Double flanged casing is produced in mild steel or galvanised steel, available in short and long cased. The impeller having manually adjustable pitch blades is made
More informationAcoustic Twin Fans (ATQ)
Acoustic Twin Fans (ATQ) Features and Benefits Available in sizes from 100 to 500mm dia 50mm Acoustically treated housing, Class O rated, self extinguishing, zero burn rate, resists ignition, no toxic
More informationVORTICENT C E RANGE Centrifugal fans
NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard
More informationMODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN
MODEL FEATURES Exhaust air up to 2,630 CFM with static pressure capabilities to 1 w.g. Mixed flow impeller for excellent air flow to pressure performance ratio Direct connection, two-speed motor Ideal
More informationHCH/ATEX: Robust wall-mounted axial fans with ATEX certification HCT/ATEX: Robust long-cased axial fans with ATEX certification
HCH/ATEX HCT/ATEX HCH/ATEX: Robust wall-mounted axial fans with ATEX certification HCT/ATEX: Robust long-cased axial fans with ATEX certification Circular axial fans (HCH) or Long-cased fans (HCT) with
More information"LCA"- long cased axial fan
"LCA"- long cased axial fan Long cased axial fans for industrial/commercial use Thirteen sizes - from 310mm to 1250mm diameter Airflow from 2,200 to 80,000m 3 /hr Single or Three Phase 2, 4 or 6 pole motors
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard
More informationCASED 24 Designed for emergency ventilation of hot fire smoke applications 300 C or 400 C for two hours operation, CE marked to EN12101-3 2002 All casings are hot dipped galvanised Sizes from 315mm to
More informationRobust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
HCH HCT HCH HCT Order code Robust wall-mounted axial or long-cased fans Robust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
More informationUnobox units with backward curved centrifugal impellers
Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase
More informationWINDER. Impellers with higher efficiency and less sound level
WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More information