Series VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting
|
|
- Dorthy Murphy
- 5 years ago
- Views:
Transcription
1 AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing with the air capacity up to 119 m 3 /h for vent duct mounting Applications Combined supply and exhaust ventilation systems for various premises where high air capacity at relatively low system resistance is required. OV and OVK fans can be used for the direct air exhaust or pressurization in smoke ventilation systems. OV and OVK fan are suitable for outdoor wall mounting. Design The fan casing and the impeller are made of steel with polymeric coating. OV and OVK fan terminal box is equipped with the cord for remote connection. fan is fitted with the external terminal box mounted on the fan casing. Motor The impellers are powered by two-, four- or sixpole, single or three phase asynchronous motors with external rotor and built-in thermal overheating protection depending on the model. Ball bearings in the motor provide long service life designed for at least 4 hours. Motor protection rating IP 44. Speed control Both smooth or step speed control is performed by means of the thymistor or autotransformer controller. Several fans can be connected to one controller if the total power and operating current do not exceed the rated controller values. Mounting Fan is installed on the wall surface by means of a square (OV series) or round (OVK series) mounting plate. fan is installed into the duct by means of connecting flanges. The fan is powered through the external remote terminal box. Power supply and installation shall be performed in compliance with the manual and wiring diagram on the terminal box. Designation key: Series and modification Motor modification Dimension type ErP data VENTS OV square mounting plate VENTS OVK round mounting plate VENTS mounting into a vent duct Number of poles Phase E single phase D three phase 2; 25; 3; 35; 4; 45; 5; 55; 63 Overall efficiency, [%] Measurement category MC Efficiency category EC Efficiency grade N Variable speed drive VSD Accessories Power Current [kw] [A] Air flow [m 3 /h] Static pressure [Pa] Speed [n/min -1 ] Specific ratio SR
2 2Е 2* 2Е 25* 2D 25* 4Е 25* 4D 25* 2Е 3 Voltage [V / 5 Hz] ~ ~ 4 23 Power [W] Current [A] Max. air capacity [m 3 /h] RPM [min -1 ] Noise level at 3 m [dba] Transported air temperature [ C] Protection rating ( IP X4) ( IP X4) ( IP X4) * Compliant to the ErP-regulation (EC) 327/211, the power consumption at optimum efficiency is < 125W. ( IP X4) ( IP X4) ( IP X4) 2D 3 4Е 3* 4D 3* 4Е 35 4D 35 4Е 4 Voltage [V / 5 Hz] 3~ ~ ~ 4 23 Power [W] Current [A] Max. air capacity [m 3 /h] RPM [min -1 ] Noise level at 3 m [dba] Transported air temperature [ C] Protection rating ( IP X4) ( IP X4) ( IP X4) * Compliant to the ErP-regulation (EC) 327/211, the power consumption at optimum efficiency is < 125W. ( IP X4) ( IP X4) ( IP X4) 4D 4 4Е 45 4D 45 4Е 5 4D 5 4Е 55 Voltage [V / 5 Hz] 3~ ~ ~ 4 23 Power [W] Current [A] Max. air capacity [m 3 /h] RPM [min -1 ] Noise level at 3 m [dba] Transported air temperature [ C] Protection rating ( IP X4) 4D 55 ( IP X4) 4Е 63 ( IP X4) 4D 63 ( IP X4) 6Е 63 Voltage [V / 5 Hz] 3~ ~ 4 1~ 23 Power [W] Current [A] Max. air capacity [m 3 /h] RPM [min -1 ] Noise level at 3 m [dba] Transported air temperature [ C] Protection rating ( IP X4) ( IP X4)
3 AXIAL FANS Fan overall dimensions: Type Dimensions [mm] D d B B1 L Weight [kg] OV 2Е OV 2Е 25 / OV 2D OV 4Е 25 / OV 4D OV 2Е OV 2D OV 4Е OV 4D OV 4Е 35 / OV 4D OV 4Е 4 / OV 4D OV 4Е 45 / OV 4D OV 4Е 5 / OV 4D OV 4Е 55 / OV 4D OV 4Е 63 / OV 4D OV 6Е OV Fan overall dimensions: Type Dimensions [mm] D D1 D2 d L Weight [kg] 2Е Е 25 / 2D Е 25 / 4D Е D Е D Е 35 / 4D Е 4 / 4D Е 45 / 4D Е 5 / 4D Е 55 / 4D Е 63 / 4D Е Fan overall dimensions: Type Dimensions [mm] D D1 D2 d B L Weight [kg] 2Е Е 25 / 2D Е 25 / 4D / Е 3 / 2D Е 3 / 4D / Е 35 / 4D Е 4 / 4D Е 45 / 4D Е Е Е
4 VENTS VENTS 2Е 25 L wa to environment dba L wa to environment dba Е 25 L wa to environment dba VENTS VENTS Е 3 LwA to environment dba Е 3 LwA to environment dba Е A Static 42.2 No Е 35 LwA to environment dba Е 4 LwA to environment dba Е A Static 41.8 No Е A Static 44.8 No
5 AXIAL FANS VENTS VENTS 4Е 45 LwA to environment dba Е 5 LwA to environment dba Е 55 L wa to environment dba Е 63 L wa to environment dba E 45 4E A Static 41.8 No A Static 42.6 No E 5 4E A Static 4.7 No A Static 44.4 No VENTS VENTS D 25 L wa to environment dba D 25 L wa to environment dba D 3 L wa to environment dba D 3 L wa to environment dba D A Static 42 No
6 VENTS VENTS ОV 4D 45 OVK 4D 45 4D 45 OV 4D 5 OVK 4D D LwA to environment dba D 4 L wa to environment dba D A Static 43.7 No D A Static 44.9 No D L wa to environment dba OVK 4D 5 L wa to environment dba D A Static 44.8 No OVK 4D A Static 43.9 No.478, VENTS VENTS 2 15 OV 4D 55 OVK 4D 55 OV 4D 63 OVK 4D ОV 6Е 63 6Е D L wa to environment dba OVK 4D 63 L wa to environment dba OVK 6Е L wa to environment dba OVK 4D 55 OVK 6E A Static 46.3 No A Static 43.3 No OVK 4D A Static 48.1 No
Series VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.
AXIAL FANS Series Series K Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing with the air
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing
More informationSeries VENTS OVК. Axial fans of low pressure in steel case with the efficiency. wall-mounted assembly.
AXIAL FAN Series Series К Series Axial fans of low pressure in steel case with the efficiency up to 11900 m 3 /h for a wall-mounted assembly Axial fans of low pressure in steel case with the efficiency
More informationSeries VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h
SOUND-INSULATED KITCHEN FAN Series device. The impeller is mounted on the motor shaft and is balanced statically and dynamically. The motor has F class motor winding insulation and ingress protection rating.
More informationVENTS KSB K2. Series. Inline centrifugal fans in heat- and sound-insulated casing with air flow up to 7000 m 3 /h SOUND-INSULATED FANS
SOUND-INSULATED FANS Series Inline centrifugal fans in heat- and sound-insulated casing with air flow up to 7 m 3 /h Purpose KSB fan design allows to use them in supply and exhaust ventilation systems
More informationVENTS ТТ. Series. In-line mixed-flow fans in plastic casing with the air capacity up to 2350 m 3 /h. FANS FOR ROUND DUCTS
FANS FOR ROUND DUCTS Series In-line mixed-flow fans in plastic casing with the air capacity up to 2350 m 3 /h. Applications VENTS TT series full-featured fans combine manifold possibilities and high features
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More informationMultifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationCJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation
CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in
More information400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet
THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for
More informationRobust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
HCH HCT HCH HCT Order code Robust wall-mounted axial or long-cased fans Robust wall-mounted axial or long-cased fans, PL version supplied with plastic impeller and AL version supplied with aluminium impeller
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationTSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.
TSA TSAT CJTSA TSA: Single inlet, belt-driven centrifugal fans with shaft outlet and forward-curved impeller. TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors, a set of pulleys
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationNCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard
More informationUSER S MANUAL VENTS OV/ OVK/ OV1/ OV1 R/ OVK1/ VKF/ VKOM / OVP
USER S MANUAL Industrial electric axial fans VENTS OV/ OVK/ OV1/ OV1 R/ OVK1/ / VKOM / OVP 2 CONTENTS Safety requirements 3 Introduction 5 Purpose 5 Delivery set 5 Designation key 5 Technical data 6 Design
More informationSMOKE EXTRACTION VENTILATION FOR PARKING PREMISES
SMOKE EXTRACTION VENTILATION FOR PARKING PREMISES 08 CONTENTS Smoke extraction systems page 4 JAF axial jet fans page 6 ICF impulse centrifugal fans page 0 Ventilation system for underroof parking page
More informationSabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
More informationsupplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
More informationSabre Sickle Fan Assisted Roof Cowls (VSR)
Sabre Sickle Fan Assisted Roof Cowls (VSR) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance Fully assembled cowl, separate plate axial fan Optional backdraught
More informationAxial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
More informationCMR/EW EFFICIENT WORK
CMR/EW AC VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/A-RFM. VSD3/A-RFT Supply on request CONTROL Supply optional accesory SUPPLY VSD1/A-RFM: 220-240 V 50/60 Hz VSD3/A-RFT: 380-415 V 50/60 Hz
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard
More informationVent-Axia Sabre Sickle Roof Fans (VSR)
Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,
More informationHigh efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable
KD High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable Electrical accessories S-ET p. 341 The KD series have external rotor
More informationKV sileo 100 M. Circular duct fans. Circular duct fans
KV sileo 100 M Speed-controllable Integral thermal contacts Can be installed in any position Can be installed outdoors Maintenance-free and reliable Electrical accessories RE p. 20 The K series is designed
More informationCJBX CJBX/AL. Options. Order code CJBX 15/15 4. Technical characteristics
CJBX CJBX/AL CJBX: Belt-driven acoustically-insulated ventilation units. CJBX/AL: Belt-driven ventilation units with aluminium profiles and prefinished sheet steel and acoustic insulation. CJBX Options
More informationVKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.
Application Features Power supply Circular duct fans are used in low-to medium-pressure ducted systems. Fans are suitable for air supply or exhaust of residential buildings, warehouses, bathrooms, lavatories,
More informationHXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationUDT UDTX FILTRATION UNITS AND AIR TREATMENT MODULES
MF: Filtration Modules UDT ME: Modules with electrically heated coils MA: Modules with water coils UDTX UDT UDTX FILTRATION UNITS AND AIR TREATMENT MODULES According EU Regulation UDT UDT Soundproofed
More informationSquare Mixed Flow Fans (MFQ)
Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are
More informationHEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS
HEAVY DUTY FANS FOR INDUSTRIAL APPLICATIONS OUR COMMITMENT TO THE ENVIRONMENT Sodeca has begun a new stage of study and design of new trends in ventilation which will help to preserve the environment and
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationCJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK
CJSX-SILENT 400º/2H BELT-DRIVEN EXTRACTION UNITS SOUNDPROOFED DOUBLE-WALL OF SOUNDPROOFING 40 MM THICK CJSX- SILENT 400ºC/2h single-inlet belt-driven extraction units, in pre-lacquered sheet metal, double-wall
More informationDevice can be connected to pull air directly from ventilated room or air duct system. Not suitable for polluted air or volatile and explosive gases.
VSA 3. ROOF FAS Features Power supply Temperature range 4 sizes; Airflow up to 117 m 3 /h; Horizontal exhaust; Backward-curved impeller; ost-effective. 23V/5Hz/1f. From -4 up to 4/65. Sizes 19 S, 19, 22
More informationVORTICENT C E RANGE Centrifugal fans
NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,
More informationEco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors
Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)
More informationDevice can only be used indoors. Not suitable for polluted air or volatile and explosive gases. Single phase speed controller.
VKS VKSA Features Power supply Temperature range 400x200 mm to 1000x500 mm flanges; Airflow up to 9200 m 3 /h; Can be mounted on floors, walls or ceilings; Forward-curved galvanized steel impeller; Cost-effective;
More informationEnergy-saving motors (ESM)
Energy-saving motors (ESM) Technology Accessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans A series fans Energy-saving motors (ESM) 316 Air performance curves 3 Energy-saving
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationAXIAL FANS Axis / Tubo OPERATION MANUAL
TUBO-M AXIS-QA AXIS-Q AXIS-QR AXIS-F AXIS-QRA AXIAL FANS Axis / Tubo OPERATION MANUAL Axis / Tubo www.blaubergventilatoren.de CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements
More informationBOX BLB Centrifugal Box Fan
Centrifugal Box Fan Select models available for next day delivery Product Overview 3 sizes from 260mm to 400mm Air volume flow rates up to 0.751m³/s Static pressures up to 733 Pa Suitable for operating
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationCSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationCircular Duct Fan prioair
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans Circular Duct Fan prioair More performance. Less energy consumption. The new EC circular duct
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationAC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
More informationErP METAL TUBE FANS - ROPERA EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE INSTALLATION
95 METAL TUBE FANS - ROPERA EC FEATURES mm to 355 mm diameter Air flow up to.56 m 3 /s Static pressures up to 7 Pa Casing - galvanized sheet steel Backward curved impeller Easy electrical connection via
More informationSentinel D-Box Single Fan
Sentinel D-Box Single Fan Duct size to 5mm Performance - Airflow.1 to 1.6m 3 /s Pressure up to 65Pa Sentinel demand ventilation fan controller with lockable isolator Aluzinc contstruction suitable for
More informationPLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationAxial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.
HCH HCH Extremely robust wall-mounted, axial or tubular fans Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor. Fan: Airflow direction from
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
More informationSentinel D-Box Twin Fan
Sentinel D-Box Twin Fan Duct Sizes mm Performance - Airflow.1 to 1.3m 3 /s, Pressure up to 65Pa Sentinel demand ventilation fan controller with lockable isolator Latest energy saving EC/DC motors Aluzinc
More informationCMP/EW EFFICIENT WORK
CMP/EW High-efficiency centrifugal single-inlet, medium-pressure fans with a direct motor and impeller with forward-facing blades fitted with IE3 asynchronous motor adjustable electronically. AC HIGHLY
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationNCF 60 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
More informationVKA/VKAS. Circular duct fans CIRCULAR DUCT FANS
Circular duct fans VKA Circular duct fans are used for air supply or extract in ventilation and air conditioning systems. Are mounted into a system of round air ducts. Can be installed in any position.
More informationExplanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
More informationAXICIAT VA. Axial fans. Smoke extraction F200/120 and F400/120. High available pressure
Smoke extraction F200/120 and F400/120 A complete range from 1250 to 95000 m 3 /s High available pressure Blade with variable pitch on stop APPLICATION Extraction or introduction of non-loaded air in the
More informationWINDER. Impellers with higher efficiency and less sound level
WINDER Impellers with higher efficiency and less sound level Winder Solutions The last new generation impeller With the Serrated Novovent Concept (S.N.C.), NOVOVENT, S.A. has developed a new blades generation.
More informationAC axial fan. sickled blades (S series) Wall ring with guard grille
W4E3-DN2-39 ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County
More informationHCH-HCT/EW EFFICIENT WORK. Wall-mounted or long-cased axial fans fitted with high-efficiency IE3 asynchronous motor adjustable electronically.
HCH-HCT/EW AC HIGHLY EFFICIENT IE3-COMPLIANT THREE-PHASE MOTORS AC VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/A-RFM. VSD3/A-RFT Supply on request CONTROL Supply optional accesory SUPPLY VSD1/A-RFM:
More informationRADIAL STEEL HIGH PRESSURE RHD 5/ RHD 4/ RHD 8/ RHD 11/ RHD 9/ RHD 13/ CAS... 8 CAM ACCESSORIES...
RADIAL STEEL HIGH PRESSURE RHD 5/10... 2 RHD 4/20... 3 RHD 8/25... 4 RHD 11/40... 5 RHD 9/60... 6 RHD 13/90... 7 CAS... 8... 14 ACCESSORIES... 18 1 RHD 5/10 A 230 / B 335 / C 385 / D 130 / E 140 / F 360
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationErP PLASTIC TUBE FANS - ESPADA FEATURES. ELECTRICAL SUPPLY V/50Hz/1f SIZES TEMPERATURE RANGE FEATURES AND CONSTRUCTION PRODUCT CODE
83 PLASTIC TUBE FANS - ESPADA FEATURES mm to 315 mm diameter Air flow up to.35 m 3 /s Static pressures up to 58 Pa Plastic cased centrifugal fan Low noise levels Corrosion resistant design Easy electrical
More informationTerminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.
EuroSeries (ESR) Cowl & base moulded from recyclable polymeric material All sizes resistant to UV light Sizes 250 to 1000 dia are protected to IP54 Optional backdraught shutters and bird guard (250-630mm)
More informationModel METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572
FEATURES Computer designed, efficient performance, forward curved blower. Blower wheel hub is secured to the shaft with a locking keyway. Blower is secured to anti-vibration mounts within the cabinet.
More informationSingle-inlet centrifugal fans
CE 200-280 4-pole Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable CE fans are easy to install. Fans in this series have impellers with forward-curved
More informationSection 4. Axial Fans - Section 4
Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX
More informationCentrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
More informationErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR
13 POWERBOX EC FANS - ESTOC EC FEATURES Sizes from 3 to 3 mm diameter Air flow up to.1 m 3 /s Static pressures up to Pa Controllable EC motors Multiple outlet orientations ELECTRICAL SUPPLY 22-2V/Hz/1f
More informationTube Fans - ROPERA Range ROPERA 100 (L) Features. Electrical Supply. Product Code. Sizes 100, 125, 150, 160, 200, 250, 315 and 355.
Tube Fans - ROPERA Range Features 1 mm to 355 mm diameter Air flow 234 m 3 /h (.65 m 3 /s) Static pressures up to 92 Pa Casing - galvanized sheet steel Backward curved impeller Easy electrical connection
More informationVKA/VKAS. Circular duct fans CIRCULAR DUCT FANS
Circular duct fans VKA Circular duct fans are used for air supply or extract in ventilation and air conditioning systems. Are mounted into a system of round air ducts. Can be installed in any position.
More informationTECHNICAL DOCUMENTATION WOLF AIR HEATERS LH-EC / LH. 30m 3 /h
TECHNICAL DOCUMENTATION WOLF AIR HEATERS LH-EC / LH 30m 3 /h THE EXTENSIVE EQUIPMENT RANGE from system supplier WOLF offers the ideal solution for commercial and industrial buildings, new build and modernisation
More informationISEO IMF Product Brochure
ISEO IMF Product Brochure Available for next day delivery with ELTA SELECT In-Line Mixed Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum Energy
More informationCYCLONE F 400 smoke extraction casing
Fire protection CYCLONE F smoke extraction casing Presentation of the CYCLONE F range (12) WHY CHOOSE A CYCLONE F? In order to fulfil the requirements of the CE markings (EN 1211-3 and the French governmental
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationHeat recovery ventilators with rotating exchanger, automatic control and EC motor, designed for vertical ducts and installation in technical room
RIRS V EKO Heat recovery ventilators with rotating exchanger, automatic control and EC motor, designed for vertical ducts and installation in technical room Common characteristics: Efficient low-noise
More informationNCF fans 60Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationCRL. MADE OF SHEET STEEL TURBINE WITH REACTION BLADES LOW NOISE LEVEL IE3 > 0.75kw MOTORS ENERGY SAVING MOTORS CRL MEDIUM PRESSURE CENTRIFUGAL FANS
CRL MADE OF SHEET STEEL TURBINE WITH REACTION BLADES LOW NOISE LEVEL IE3 > 0.75kw MOTORS ENERGY SAVING MOTORS CRL MEDIUM PRESSURE CENTRIFUGAL FANS CRL Medium pressure, single-stage aspiration fans with
More informationHorizontal Cartridge DUST COLLECTOR OPF
* The level of sound pressure is affected by the background noise, the reverberation of the environment, the presence of other sonorsources and the positioning of the machine near reflecting surfaces.
More informationFRF FRF/EW ROOF-MOUNTED CENTRIFUGAL EXTRACTOR FAN WITH VERTICAL AIR OUTLET
FRF EXTERNAL ROTOR MOTOR ALUMINIUM STRUCTURE AND BOX THERMAL AND ACOUSTIC INSULATION BUILT-IN SAFETY SWITCH BUILT-IN WATER OUTLET DRAIN FRF/EW EFFICIENT WORK HIGH EFFICIENCY FAN E.C. BRUSHLESS INDUSTRIAL
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationSpecifications. Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16).
Specifications Applications Ventilation of safety cabinets (STORM 10), scrubbers, fume capture arms, filter housing, etc. (STORM 12, 14, 16). Housings: PP* Single block strong high density UV treated and
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationTWINFLOW STDR Product Brochure
TWINFLOW STDR Brochure Available for next day delivery with ELTA SELECT Direct Drive Twin Centrifugal Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
More informationFEATURES & BENEFITS UPON REQUEST
ErP 27 IDUSTRIAL CETRIFUGAL FAS WITH VERY HIGH PRESSURE APPLICATIO High pressure industrial centrifugal fans with backward curved impeller, suitable for exhausting clean or slightly dusty air. They can
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationIN-LINE NORMALIZED ELECTROPUMPS in cast iron
INLINE NORMALIZED ELECTROPUMPS Twin inline centrifugal electropumps with cast iron hydraulic components, single impeller, compliant with DIN 24255. Equipped with normalised motors. APPLICATIONS Heating
More information