ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series

Size: px
Start display at page:

Download "ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series"

Transcription

1 asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air discharge configuration available in version: B models for air extract. A models for air supply. Base manufactured from galvanized sheet steel. Cowl manufactured from spun aluminium. The impellers for models 31 to are manufactured from one piece injection moulded plastic, reinforced with chemical anchored fibreglass for additional strength. Models to 1 incorporate separate plastic blades locked within a die cast aluminium hub. Available, depending upon the model, with single or three phase motors in,, 8 or /8 poles. Motors All motors are IP (1) Class F () with thermal protection (3) and ball bearings greased for life. lectrical supply: Single phase 3V-Hz (Capacitor located inside the wiring terminal box). Three phase V-Hz. (See characteristics chart). All single phase models are speed controllable by voltage except HCTB/-, HCTB/-3. All three phase models are speed controllable by autotransformer, except models HCTT/-, HCTT/-3, Ø 71 to 1. Three phase models, 1 speed motor, are speed controllable by inverter. (1) 8 to 1 models are IP. () Air stream temperature limits -ºC to +7ºC (except models 8 to 1 suitable for usage in environments from -3ºC to +ºC. (3) 8 to 1 models are not equipped with thermal protection. ATX versions HCTT On request, explosion proof versions in accordance with ATX Directive, for 3 phase models. For ambient working temperatures from -ºC to +ºC. - ATX Flameproof - Gas Only available for 8 to 1 models II G xd IIC T II G xd IIB T - ATX Increased safety - Gas II G xe II T3 - ATX - Dust II 3D DIP 1ºC or 13ºC Impeller dynamically balanced Impellers are dynamically balanced, according to ISO 19 standard, giving vibration free operation. Bird-proof guard. To select HCTT ATX refer to performance curves, or asyvent. Note electrical data may vary for ATX motors. Specific applications Versions

2 Technical characteristics xtract air configuration Before installation check that the product electrical characteristics listed on the data plate label (voltage, power, frequency, etc.) match those of the intended electrical supply. Model Speed (rpm) Maximum absorbed power (W) Maximum absorbed current (A) 3 V V High speed Maximum duty (m 3 /h) Low*** speed Sound pressure level at 1, meters* (db(a)) Weight (kg) Speed Controller Inlet Outlet RB RMB/T Variable frequency inverter VFTM VFKB Switch for -speed motors SINGL PHAS poles HCTB/-31-B 13 1, , RB-1 RMB-1, HCTB/-3-B 1,9.8 1,8 RB-1 RMB-1, HCTB/--B , , RB-, RMB-3, HCTB/--B 19 8,3. 1 3, RB-, RMB-3, HCTB/--B 19 3, , RB- RMB-3, HCTB/--B 1 98, , HCTB/-3-B , , SINGL PHAS poles HCTB/--B 83 1, , RB-1 RMB-1, HCTB/--B 8 9 1,., RB-, RMB-3, HCTB/--B 9,.8 8, RB- RMB-3, HCTB/-3-B 8 1, 8. 1, RB- RMB-3, THR PHAS poles HCTT/-31-B 13 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/-3-B 1,.8. 1,8 RMT-1, VFTM TRI-,37 VFKB- HCTT/--B 13 3, , RMT-1, VFTM TRI-,37 VFKB- HCTT/--B 13 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/--B 13 1, , RMT-, VFTM TRI-, VFKB- HCTT/--B 13 11, , VFTM TRI-1,1 VFKB- HCTT/-3-B , , VFTM TRI-1, VFKB- HCTT/-71-B 13, , VFTM TRI-1, VFKB- HCTT/-8-B 1 3 kw ** 7, , VFTM TRI- VFKB-8 HCTT/-9-B 1 kw ** 9, , VFTM TRI-, HCTT/-1-B 1, kw ** 1, , VFTM TRI-, THR PHAS /8 poles HCTT//8--B 13/7 /1,/, , HCTT//8--B 13/7 /17,8/, DMA,/1 DH HCTT//8--B 137/7 /3 1,/, DMA 1/1,3 DH HCTT//8--B 13/7 11/3 / DMA 1/,3 DH HCTT//8-3-B 1/7 13/,/1, HCTT//8-71-B 13/7 /,/1, HCTT//8-8-B 13/7 3/, kw **,8/, DMA 3,1/7, DH HCTT//8-9-B 1/73 /,7 kw ** 8,9/3, DMA,/1 DH HCTT//8-1-B 1/71,/1,1 kw ** 11/3, DMA,/13 DH THR PHAS poles HCTT/--B 83 19, , RMT-1, VFTM TRI-,37 VFKB- HCTT/--B 83,7. 3., RMT-1, VFTM TRI-,37 VFKB- HCTT/--B 8 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/-3-B 81 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/-71-B , , RMT- VFTM TRI-1, VFKB- HCTT/-8-B 93,7 kw **, , VFTM TRI-1,1 VFKB- HCTT/-9-B 93 1,1 kw ** 3, , VFTM TRI-1, VFKB- HCTT/-1-B 93 1, kw **, , VFTM TRI-, VFKB-8 THR PHAS 8 poles HCTT/8-71-B , 9., VFTM TRI-,37 VFKB- HCTT/8-8-B , , VFTM TRI-,7 VFKB- HCTT/8-9-B 7, , VFTM TRI-1,1 VFKB- HCTT/8-1-B 7 7, , VFTM TRI-1,1 VFKB- * Sound pressure measured in free field condition. ** Nominal power. *** Low speeed with a delta/star switch. Three phase speed controllers (RMT) or inverter controller (VFKB/VFTM): Three phase V. 3

3 Technical characteristics Supply air configuration Before installation check that the product electrical characteristics listed on the data plate label (voltage, power, frequency, etc.) match those of the intended electrical supply. Model Speed (rpm) Maximum absorbed power (W) Maximum absorbed current (A) 3 V V High speed Maximum duty (m 3 /h) Low*** speed Sound pressure level at 1, meters* Weight (kg) Speed Controller Inlet Outlet RB RMB/T SINGL PHAS poles Variable frequency inverter VFTM VFKB Switch for -speed motors HCTB/-31-A 13 1,.1 8 1, RB-1 RMB-1, HCTB/-3-A 1, ,8 RB-1 RMB-1, HCTB/--A 1 3 1,.7 8 1, RB-, RMB-3, HCTB/--A 19 8, , RB-, RMB-3, HCTB/--A 19 3, , RB- RMB-3, HCTB/--A 1 98, , HCTB/-3-A , , SINGL PHAS poles HCTB/--A 83 1,1. 3, RB-1 RMB-1, HCTB/--A 8 9 1,. 3, RB-, RMB-1, HCTB/--A 9, , RB-, RMB-3, HCTB/-3-A 9 1, 9.9 7, RB- RMB-3, THR PHAS poles HCTT/-31-A 13 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/-3-A 13, ,8 RMT-1, VFTM TRI-,37 VFKB- HCTT/--A 138 3, , RMT-1, VFTM TRI-,37 VFKB- HCTT/--A 13, , RMT-1, VFTM TRI-,37 VFKB- HCTT/--A 138 1, , RMT-, VFTM TRI-, VFKB- HCTT/--A , , VFTM TRI-1,1 VFKB- HCTT/-3-A , , VFTM TRI-1, VFKB- HCTT/-71-A 13,. 8 8, VFTM TRI-1, VFKB- HCTT/-8-A 1 3 kw ** 7, , VFTM TRI- VFKB-8 HCTT/-9-A 1 kw ** 9, , VFTM TRI-, HCTT/-1-A 1, kw ** 1, , VFTM TRI-, THR PHAS /8 poles HCTT//8--A 13/7 /1,/, , HCTT//8--A 13/7 /17,8/, DMA,/1 DH HCTT//8--A 137/7 /3 1,/, DMA 1/1,3 DH HCTT//8--A 13/7 11/3 / DMA 1/,3 DH HCTT//8-3-A 1/7 13/,/1, HCTT//8-71-A 13/7 /,/1, HCTT//8-8-A 13/7 3/, kw **,8/, DMA 3,1/7, DH HCTT//8-9-A 1/73 /,7 kw ** 8,9/3, DMA,/1 DH HCTT//8-1-A 1/71,/1,1 kw ** 11/3, DMA,/13 DH THR PHAS poles HCTT/--A 83 19, , RMT-1, VFTM TRI-,37 VFKB- HCTT/--A 83,7.. 3, RMT-1, VFTM TRI-,37 VFKB- HCTT/--A 8 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/-3-A 81 1, , RMT-1, VFTM TRI-,37 VFKB- HCTT/-71-A , , VFTM TRI-1, VFKB- HCTT/-8-A 93,7 kw**, , VFTM TRI-1,1 VFKB- HCTT/-9-A 93 1,1 kw** 3, , VFTM TRI-1, VFKB- HCTT/-1-A 93 1, kw**, , VFTM TRI-, VFKB-8 THR PHAS 8 poles HCTT/8-71-A , , VFTM TRI-,37 VFKB- HCTT/8-8-A 7,37 kw** 1, , VFTM TRI-,7 VFKB- HCTT/8-9-A 7, kw**, , VFTM TRI-1,1 VFKB- HCTT/8-1-A 7,7 kw**, , VFTM TRI-1,1 VFKB- * Sound pressure measured in free field condition. ** Nominal power. *** Low speeed with a delta/star switch. Three phase speed controllers (RMT) or inverter controller (VFKB/VFTM): Three phase V.

4 Performance curves xtract air configuration (type B) qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at ºC and 7 mmhg. Performance data in accordance with ISO 81 and AMCA 1-99 Standards. (Pa) (mmwg) Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) - Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) - and Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) - and Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) - and Poles Lp (db(a)) (Pa) (mmwg) 3 - and Poles Lp (db(a)) qv [m 3 /h] qv [m 3 /h] *Low speed: only for three phase models. The values of sound are sound pressure levels measured at 1, m, in free field conditions, at the fan inlet side.

5 Performance curves xtract air configuration (type B) qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at ºC and 7 mmhg. Performance data in accordance with ISO 81 and AMCA 1-99 Standards. 71 -, and 8 Poles qv [m 3 /h] , and 8 Poles qv [m 3 /h] , and 8 Poles qv [m 3 /h] , and 8 Poles qv [m 3 /h] *Low speed: only for three phase models. The values of sound are sound pressure levels measured at 1, m, in free field conditions, at the fan inlet side.

6 Performance curves Supply air configuration (type A) qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at ºC and 7 mmhg. Performance data in accordance with ISO 81 and AMCA 1-99 Standards Poles - Poles qv [m 3 /h] qv [m 3 /h] (Pa) (mmwg) - and Poles Lp (db(a)) 1 1 (Pa) (mmwg) - and Poles Lp (db(a)) qv [m 3 /h] qv [m 3 /h] and Poles 3 - and Poles qv [m 3 /h] qv [m 3 /h] *Low speed: only for three phase models. The values of sound are sound pressure levels measured at 1, m, in free field conditions, at the fan inlet side. 7

7 Performance curves Supply air configuration (type A) qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at ºC and 7 mmhg. Performance data in accordance with ISO 81 and AMCA 1-99 Standards. (Pa) (mmwg) 71 -, and 8 Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) 8 -, and 8 Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) 9 -, and 8 Poles Lp (db(a)) qv [m 3 /h] (Pa) (mmwg) 1 -, and 8 Poles 7 7 Lp (db(a)) qv [m 3 /h] *Low speed: only for three phase models. The values of sound are sound pressure levels measured at 1, m, in free field conditions, at the fan inlet side. 8

8 Acoustic characteristics Sound power spectrum: To obtain the sound power level spectrum, add the correction value shown below from value given in the technical characteristics table: XTRACT SUPPLY Inlet Outlet Outlet Inlet Inlet 3 Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Poles Inlet Outlet Poles Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet 8 7 Inlet 7 3 Outlet Outlet Inlet Inlet Outlet Outlet Inlet Poles 3 71 Inlet Outlet Inlet Outlet Poles 3 71 Outlet Inlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Inlet Outlet Outlet Inlet Poles 8 9 Inlet Outlet Inlet Outlet Poles 8 9 Outlet Inlet Outlet Inlet Inlet Outlet Outlet Inlet

9 Dimensions (mm) Model Ø A ob oc Ø D Ø F G H H B C G A D F Mounting accessories JMS Sealing frame For mounting a roof fan on an up stand or base. Supplied with screws and gasket for a complete weatherproof seal. F A B C Model A B C F JMS- 7 7 JMS JMS JMS JMS JMS JBS Flat roof up stand For mounting a fan on a flat roof without up stands. For use on horizontal roofs. Internal insulation to prevent condensation. Supplied with screws and gasket for a complete weather seal. A B C G ØD (M) Model A B C Ø D (M) G JBS (M1) 3 3 JBS (M1) 3 7 JBS (M1) 3 78 JBS (M1) 97 JBS (M1) 117 JBS (M1) 3 13 JPA Accessory adapter plate Used when mounting the accessories (JCA, JBR, JA). Allows the fan to be disconnected from the up stand without having to remove the duct. n x t B C Ø D H Model B C Ø D nxt Ø H JPA- 38 8xM8 39 JPA xM1 JPA xM1 JPA xM1 9 JPA xM1 77 JPA xM1 17 JCA Backdraft shutter Prevents backdraft when the fan is not operating. To be mounted at the fan inlet with the JPA plate. F Ø J Ø H Model Ø D F Ø H Ø J JCA- N JCA-3 N 3 7 JCA-71 N JCA-9 N JCA-11 N Ø D JCA-1 N JBR Flange For use when circular connection is required directly to the fan. To be mounted at the fan inlet with the JPA plate or fixed directly to the fan base (rivets or screws not supplied). Ø J Ø H Ø D Model Ø D Ø H Ø J JBR- N JBR-3 N JBR-71 N JBR-9 N JBR-11 N JBR-1 N

10 Mounting accessories JA Flexible coupling Reduces the transmission of vibrations when the duct is connected directly to the fan. To be mounted at the fan inlet with JPA plate. Model Ø D Ø H Ø J JA- N JA-3 N 3 7 JA-71 N 3 81 JA-9 N JA-11 N JCC Model Ø B Ø C Ø D L Adapter for circular duct JCC For use when fitting the models up to, directly to a spirally JCC wound circular duct. L C B r BI Support base for inclined curb mounted installations To ensure a proper installation of the product it is essential to specify the roof pitch angle and the distance between the roof beam profiles. VIWD IN A DIRCTION Model B C BI- BI- 1 3 BI BI BI BI d: distance between the roof beam profiles a: roof pitch angle (curb) l JAA Acoustic up stand Reduces in duct and radiated noise. For use when mounting a fan on a flat roof without up stands. Supplied with screws and gasket for a complete weather seal. Model oa ob oc Ø D (M) H og JAA- 7 1 (MI) 7 3 JAA (MI) 7 7 JAA (MI) 1 78 JAA (MI) 1 97 JAA (MI) JAA (MI) 1 13 Acoustic attenuation in db(a) at the corresponding frequency band in (Hz). Model JAA JAA JAA JAA JAA JAA JAA Attenuator pressure drops Δp [Pa] qv [m 3 /h] 1

11 Installation ➃ ➀ or ➁ or ➂ ➄ or➈ ➇ ➆ ➅ Model of fan j Sealing frame k Flat roof insulated up stand l Acoustic up stand m Accessory adapter shutter n Back draft shutter o Flange with spigot p Flexible coupling q Circular adapter r Support base for inclined curb mounted installations 31 JMS- JBS- JAA- JPA- JCA- N JBR- N JA- N JCC- BI- 3 JMS-3 JBS-3 JAA-3 JPA-3 JCA-3 N JBR-3 N JA-3 N JCC-3 BI JMS-71 JBS-71 JAA-71 JPA-71 JCA-71 N JBR-71 N JA-71 N BI-7 JMS-9 JBS-9 JAA-9 JPA-9 JCA-9 N JBR-9 N JA-9 N BI-9 JMS-11 JBS-11 JAA-11 JPA-11 JCA-11 N JBR-11 N JA-11 N BI-11 JMS-1 JBS-1 JAA-1 JPA-1 JCA-1 N JBR-1 N BI-1 lectrical accessories RB Single phase electronic speed controllers. RMB / RMT Auto transformer speed controllers available in single phase and three phase motors. On/ Off lectrical isolation switch Switch On/ Off P. Switch On/ Off 8P. COM D/S Three phase fan Y / Δ switch nables to connect three phase fans. VFTM IP Adjustable frequency drives for three phase motors from,37 to 1 kw. VFKB IP Adjustable frequency drive for three phase motors from,37 to kw. DMA DH Switch for -speed motors with Dahlander.

ACOUSTIC CABINET FANS CVAB / CVAT Series

ACOUSTIC CABINET FANS CVAB / CVAT Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models

More information

ROOF MOUNTED FANS MAX-TEMP Series, Centrifugal 400 ºC/2h Rated Fans

ROOF MOUNTED FANS MAX-TEMP Series, Centrifugal 400 ºC/2h Rated Fans ROOF MOUNTD FANS MAX-TMP Series, entrifugal 400 º/2h Rated Fans Description - Applications The MAX-Temp range of roof extract fans are available in horizontal (TH-THT) or vertical (TV-TVT) discharge formats,

More information

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester

More information

CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.

CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers. ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic

More information

ACOUSTIC CABINET FANS CVB / CVT Series

ACOUSTIC CABINET FANS CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive

More information

ROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling

ROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for

More information

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to

More information

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with

More information

Plate mounted axial flow fans HXBR / HXTR Series

Plate mounted axial flow fans HXBR / HXTR Series Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester

More information

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel

More information

ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box

ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All

More information

CENTRIFUGAL IN-LINE FANS VENT Series

CENTRIFUGAL IN-LINE FANS VENT Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.

More information

Short casing. Long casing (L version) Commercial premises

Short casing. Long casing (L version) Commercial premises CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled

More information

ROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling

ROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength

More information

MIXVENT-TH Series Mixed Flow Fans

MIXVENT-TH Series Mixed Flow Fans ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured

More information

CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts

CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal

More information

COMPACT Series type HCFB / HCFT (Plastic impellers)

COMPACT Series type HCFB / HCFT (Plastic impellers) Plate mounted axial flow fans COMPACT HCFB/HCFT PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT (Plastic impellers) 0 017582 603079 Compact design Corrosion resistance Flame retardant terminal

More information

BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series

BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the

More information

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced. LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a

More information

CYLINDRICAL CASED AXIAL FLOW FANS

CYLINDRICAL CASED AXIAL FLOW FANS - Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate

More information

supplied in Form (B) configuration. Airflow over Impeller- Motor.

supplied in Form (B) configuration. Airflow over Impeller- Motor. CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,

More information

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).

More information

DIRECT-AIR ILB / ILT Series Rectangular duct fans

DIRECT-AIR ILB / ILT Series Rectangular duct fans IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller

More information

VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot

VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction

More information

CYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS

CYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS - ADJUSTABLE PITCH FANS Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish. All models incorporate

More information

CGT Series Adjustable Pitch Fans

CGT Series Adjustable Pitch Fans AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel

More information

CGT Series Adjustable Pitch Fans

CGT Series Adjustable Pitch Fans AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel

More information

IN-LINE DUCT FANS MIXVENT-TD Fan Systems

IN-LINE DUCT FANS MIXVENT-TD Fan Systems IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment

More information

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,

CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard, RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from

More information

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans

TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester

More information

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.

In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information. In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V

More information

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB

CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The

More information

TGT Series Adjustable Pitch Fans

TGT Series Adjustable Pitch Fans CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot

More information

CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT

CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range

More information

Mixed Flow Roof Fans (RMH)

Mixed Flow Roof Fans (RMH) Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard

More information

TGT Series Adjustable Pitch Fans

TGT Series Adjustable Pitch Fans CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped

More information

Vent-Axia Sabre Sickle Roof Fans (VSR)

Vent-Axia Sabre Sickle Roof Fans (VSR) Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,

More information

BELT DRIVEN CABINET FANS CVTT Series

BELT DRIVEN CABINET FANS CVTT Series Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal

More information

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1. xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof

More information

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range

More information

Terminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.

Terminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications. EuroSeries (ESR) Cowl & base moulded from recyclable polymeric material All sizes resistant to UV light Sizes 250 to 1000 dia are protected to IP54 Optional backdraught shutters and bird guard (250-630mm)

More information

Sabre Plate Mounted Sickle Fans (VSP)

Sabre Plate Mounted Sickle Fans (VSP) Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation

More information

CMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced

CMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC

More information

Sabre Sickle Fan Assisted Roof Cowls (VSR)

Sabre Sickle Fan Assisted Roof Cowls (VSR) Sabre Sickle Fan Assisted Roof Cowls (VSR) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance Fully assembled cowl, separate plate axial fan Optional backdraught

More information

Performance. Sound Levels. Impellers. Motors. Accessories

Performance. Sound Levels. Impellers. Motors. Accessories EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class

More information

ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans

ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and

More information

Mixed Flow Roof Fans (RMH)

Mixed Flow Roof Fans (RMH) Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard

More information

Short casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles

Short casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Additional Information Standard air direction: form (B) configuration (Impeller over ). models description: incorporated an "L" after blade pitch angle. E.g.

More information

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C

CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured

More information

Ultra-quiet circular duct fans TD-SILENT ECOWATT Series

Ultra-quiet circular duct fans TD-SILENT ECOWATT Series TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan

More information

BATHROOM EXTRACT FANS DECOR-100 Series

BATHROOM EXTRACT FANS DECOR-100 Series DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon

More information

IN-LINE CENTRIFUGAL DUCT FANS VT Series

IN-LINE CENTRIFUGAL DUCT FANS VT Series IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range

More information

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7 CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound

More information

AC Commercial Fans Edition. ErP ready

AC Commercial Fans Edition. ErP ready AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application

More information

AXIAL FLOW CABINET FAN CGT Series

AXIAL FLOW CABINET FAN CGT Series Range of adjustable pitch aerofoil blade, axial flow cabinet fans. Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25 mm thickness fireproof fibreglass acoustic insulation

More information

Square Mixed Flow Fans (MFQ)

Square Mixed Flow Fans (MFQ) Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are

More information

EDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc

EDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 Ceiling or wall mounting extract ventilation Extract ventilation through wall or using a shunt duct system All V models incorporate all accessories

More information

MVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web:

MVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web: MV S.r.l. Via San Giovanni osco, 12-15121 Alessandria Tel. +39 131 68.73 - ax +39 131 56.334 Web: www.mvf.it -mail: info@mvf.it IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series TD-SILNT - MOD 16 TO

More information

EDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM

EDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 0 015982 603071 Installation examples Ceiling or wall mounting Extract ventilation through short duc extract ventilation Extract ventilation

More information

Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ

Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3

More information

Centrifugal performance characteristics with axial flow pattern: RADAX VAR

Centrifugal performance characteristics with axial flow pattern: RADAX VAR High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers

More information

ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE

ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4

More information

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity 400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,

More information

CHMT Series, F Rated Fans

CHMT Series, F Rated Fans CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke

More information

MAJAX-2 GENERAL SPECIFICATION

MAJAX-2 GENERAL SPECIFICATION MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed

More information

MegaBox Product-specific information

MegaBox Product-specific information MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions

More information

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.

More information

Multifunctional 400ºC/2h and 300ºC/2h roof fans

Multifunctional 400ºC/2h and 300ºC/2h roof fans HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544

More information

Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572

Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572 FEATURES Computer designed, efficient performance, forward curved blower. Blower wheel hub is secured to the shaft with a locking keyway. Blower is secured to anti-vibration mounts within the cabinet.

More information

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators

More information

Explanation of AR Series Ventilator Products. Fan type code D S AR AE

Explanation of AR Series Ventilator Products. Fan type code D S AR AE Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction

More information

ROOFMASTER STEF-HT ROOF FAN

ROOFMASTER STEF-HT ROOF FAN fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation

More information

Specifications ROOF MOUNTED SEAT SERIES. ATEX version. 1 - Roof unit kit. 2 - Enclosed pedestal. Roof unit kit includes:

Specifications ROOF MOUNTED SEAT SERIES. ATEX version. 1 - Roof unit kit. 2 - Enclosed pedestal. Roof unit kit includes: ROOF MOUNT SAT SRIS Specifications 1 - Roof unit kit Roof unit kit includes: ATX version A 1 Cap bracket 1 Motor Cap 1 Switcher 1 Roof curbe bare 1 xhaust Guard imensions (mm) A B C C KIT ROOF 15 550 560

More information

CVHT Series - F rated cabinet fans

CVHT Series - F rated cabinet fans N 50-55 1/1/08 19:26 Página 50 BLT DRIVN BINT NS Series - 00 120 rated cabinet fans NW pproved to N12101- standard Range of belt drive cabinet fans designed for smoke extraction in fire conditions and

More information

Axial fans. What s more, non-stock models are normally available within two weeks.

Axial fans. What s more, non-stock models are normally available within two weeks. Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive

More information

GigaBox centrifugal fans Product specific information

GigaBox centrifugal fans Product specific information GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,

More information

CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS

CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire

More information

Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.

Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones. CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal

More information

Bifurcated Case Axial Fans (BIFA)

Bifurcated Case Axial Fans (BIFA) Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient

More information

TCDH F400-TCDV F400. Smoke extract - Fire protection SMOKE EXTRACT FANS CENTRIFUGAL BACKWARD ROOF FANS F Application. Range.

TCDH F400-TCDV F400. Smoke extract - Fire protection SMOKE EXTRACT FANS CENTRIFUGAL BACKWARD ROOF FANS F Application. Range. N OU VE A U Approved F400 10 (400 C 10 mn) CE marked Special range for speed variation VAR Easy installation and maintenance Low sound level Electrical accessories and relay box mounted wired New vertical

More information

Hison Axial Flow Fans

Hison Axial Flow Fans Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,

More information

SECTION AXIAL HVAC FANS

SECTION AXIAL HVAC FANS SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Hison Axial Flow Fans

Hison Axial Flow Fans Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,

More information

Dynamically-balanced impellers with extremely robust cores CMP T 5.5

Dynamically-balanced impellers with extremely robust cores CMP T 5.5 Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.

More information

ErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR

ErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR 13 POWERBOX EC FANS - ESTOC EC FEATURES Sizes from 3 to 3 mm diameter Air flow up to.1 m 3 /s Static pressures up to Pa Controllable EC motors Multiple outlet orientations ELECTRICAL SUPPLY 22-2V/Hz/1f

More information

Circular Box Fans - DAISHO EC Range DAISHO EC 125. Features. Electrical Supply. Product Code. Sizes 125, 150, 200, 250, 315, 450, 630 and 1000.

Circular Box Fans - DAISHO EC Range DAISHO EC 125. Features. Electrical Supply. Product Code. Sizes 125, 150, 200, 250, 315, 450, 630 and 1000. Circular Box Fans - DAISHO EC Range Features 125mm to 1mm Air flow 1,25 m 3 /h (3.5m 3 /s) Static pressures up to 125 Pa Maximum temperature range 6ºC Suitable for variable or constant pressure systems

More information

AXUS HIGH TEMPERATURE AXIAL FANS

AXUS HIGH TEMPERATURE AXIAL FANS WIDE RANGE OF SMOKE EXTRACT FANS FOR HIGH TEMPERATURE APPLICATIONS. 342 029 2085 8 BENEFITS TRIED & TESTED Nuaire s high temperature fans have been tested in accordance with the latest legislation and

More information

Acoustic Twin Fans (ATQ)

Acoustic Twin Fans (ATQ) Acoustic Twin Fans (ATQ) Features and Benefits Available in sizes from 100 to 500mm dia 50mm Acoustically treated housing, Class O rated, self extinguishing, zero burn rate, resists ignition, no toxic

More information

Max. airflow m 3 /s Diam. min. Diam. max

Max. airflow m 3 /s Diam. min. Diam. max Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89

More information

Device can be connected to pull air directly from ventilated room or air duct system. Not suitable for polluted air or volatile and explosive gases.

Device can be connected to pull air directly from ventilated room or air duct system. Not suitable for polluted air or volatile and explosive gases. VSV VSVI Features Power supply Temperature range Sizes Construction Installation Speed control options 9 sizes; Airflow up to 5300 m 3 /h; Vertical exhaust; Backward-curved plastic or galvanized steel

More information

ROOFMASTER STEF-ATEX ROOF FAN

ROOFMASTER STEF-ATEX ROOF FAN Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...

More information

NEW Acoustic In-Line Fans (ACQ)

NEW Acoustic In-Line Fans (ACQ) NEW Acoustic In-Line Fans (ACQ) Acoustically treated housing, Class O rated, sandwich construction selected for maximum noise absorption Motors protected to IP44 Motor insulation Class B Maximum operating

More information

CYCLONE F 400 smoke extraction casing

CYCLONE F 400 smoke extraction casing Fire protection CYCLONE F smoke extraction casing Presentation of the CYCLONE F range (12) WHY CHOOSE A CYCLONE F? In order to fulfil the requirements of the CE markings (EN 1211-3 and the French governmental

More information

HIGH-POWERED VENTILATORS

HIGH-POWERED VENTILATORS HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series

More information

ACOUSTIC CABINET FANS FOR SUPPLY AIR APPLICATIONS CAIB/T PRO-REG Series

ACOUSTIC CABINET FANS FOR SUPPLY AIR APPLICATIONS CAIB/T PRO-REG Series ACOUSTIC CABINET FANS FOR SULY AIR ALICATIONS CAIB/T RO-REG Series Introduction of fresh air to commercial offices and industrial kitchens. Acoustic cabinet fan in galvanised sheet steel with reinforced

More information

TD-ECOWATT AND DECOR-ECOWATT Series

TD-ECOWATT AND DECOR-ECOWATT Series S&P presents its new ranges of domestic and commercial fans with DC motors TD-ECOWATT AND DECOR-ECOWATT Series Up to 55% savings in energy consumption Reduced CO 2 emissions Improvement of the environment

More information

Square Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.

Square Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710. Square Duct Fans - ESTOC Range Features Sizes from 355 to 71 mm diameter Air flow 1,9 m 3 /h (5.2 m 3 /s) Static pressures up to 115 Pa Maximum temperature from +4 C to +7` C (depending on the model) Adjustable

More information

Series VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h

Series VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h SOUND-INSULATED KITCHEN FAN Series device. The impeller is mounted on the motor shaft and is balanced statically and dynamically. The motor has F class motor winding insulation and ingress protection rating.

More information

Section 4. Axial Fans - Section 4

Section 4. Axial Fans - Section 4 Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX

More information

TD-SILENT range, the quietest fans in the world in their class

TD-SILENT range, the quietest fans in the world in their class TD-SILNT IN-LIN MIXD LOW DUT NS ULTR-QUIT TD-SILNT Series NW Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed

More information