MULTI USE TRACTOR PARTS CATALOG MODEL 1305 SERIAL NUMBER AND ABOVE

Size: px

Start display at page:

Download "MULTI USE TRACTOR PARTS CATALOG MODEL 1305 SERIAL NUMBER AND ABOVE"

Christopher Carroll
6 years ago
Views:

1 MULTI USE TRACTOR PARTS CATALOG MODEL 0 SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0TR--0--0

2 Contents Part Number Description Page Number Sector A Engine A Hydro Handle K Transmission A Tractor Frame/Trans A Tractor Controls A... Tractor Only A... Tractor with Diff-Loc A... K0PB/ Park Brake Kit A (Optional Equipment)... K0WL/ Wheel-Loc Kit A (Optional Equipment)... 0 K0DL/ Differential-Loc Kit A (Optional Equipment)... K0LK/ Broom/Edger Lift Kit A...

(x) 0 0 (x) (x) 0 or 0 0 0 Torque to ft. lbs. Torque to ft. lbs. Grease. Ream Out To.

(x) (x) (x) (x) (x) (x) (x) (x) Apply Anti-Seize Lubricant.

3 (x) 0 0 (x) (x) 0 or Torque to ft. lbs. Torque to ft. lbs. Grease. Ream Out To.00/.00 DIA. After Installation. Apply Loctite Thread Locker. (x) (x) (x) (x) (x) (x) (x) (x) Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: 0-- Revisions 0/ JRD MODEL 0 Sector A 0-0

4 TOP VIEW 0 Apply Anti-Seize Lubricant. Apply Loctite Threadlocker. Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: --0 Revisions /0 JRD MODEL 0 Engine A 0-0

5 Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: 0-- Revisions 0/ JRD MODEL 0 Hydro Handle 0-0

6 0,, Seal Kit Trans. Reservoir Upgrade Kit Kit upgrades unit from 0--0 Round Reservoir (s/n: 0 & below) to new Square Reservoir 0-- (s/n: 0 & above) Kit includes: Square Reservoir Cap Trans. Mounting Bracket Trans. Shield 0, 0, Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: 0-- Revisions 0/ JRD MODEL 0 K Transmission A 0-0

7 Retro Kit 0 0 (Ref.) Apply Loctite Thread Locker If needed install # washer (as many as required after # v-belt has been installed and tightened.) Tighten # carr. bolt after # v-belt has been installed and tightened. 0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions 0/ JRD MODEL 0 Tractor Frame/Trans A 0 TURF TEQ LLC Date:

8 0 0 (Supplied with Throttle Cable item # ) NOTE: requires new mount bracket and location. Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: 0-- Revisions 0/JRD MODEL 0 Tractor Controls A 0-00

TRANSMISSION CONFIGURATION FOR 0SP, 0SP & 0SP POWER EDGER DIFF-LOC ARM

Reinstall hardware with a additional / washer.

to 0. 0. Pivot diff-loc control arm completely out (as shown) then

into the on position. 0 (ON) 0 0 0 Apply Anti-Seize Lubricant.

9 TRANSMISSION CONFIGURATION FOR 0SP, 0SP & 0SP POWER EDGER DIFF-LOC ARM POSITIONING. Remove spring & spring mounting bracket from transmission. Reinstall hardware with a additional / washer.. Bend spring mounting bracket from 0 to Pivot diff-loc control arm completely out (as shown) then reinstall spring mounting bracket at position hold to hold diff-loc arm out in the ON position. NOTE: Transmission axle may have to rotate a little for diff-loc to snap into the on position. 0 (ON) Apply Anti-Seize Lubricant. TOP VIEW Transmission & Wheel A Notes: Does Not Include Diff-Loc or Wheel-Loc Kits. All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: 0-- Revisions 0/ JRD MODEL 0 Tractor Only A

0 TRANSMISSION CONFIGURATION FOR 0BR & 0BR POWER BROOMS, 0PR

Shown) ForAssemblyReferto Page, Differential-Loc Kit A 0

10 0 TRANSMISSION CONFIGURATION FOR 0BR & 0BR POWER BROOMS, 0PR & 0PR POWER RAKES & 0BC BRUSH CUTTER 0PL PLOW 0 0 (Not Shown) ForAssemblyReferto Page, Differential-Loc Kit A 0 Diff-Loc Control Arm Note: Remove Spring Apply Anti-Seize Lubricant. TOP VIEW Transmission & Wheel A Notes: Includes Diff-Loc Kit. Does Not Include Wheel-Loc Kit. All hardware is Grade, plated and course thread unless otherwise specified. Revisions 0/ JRD MODEL 0 Tractor with Diff-Loc A TURF TEQ LLC Date: 0--

11 0 Optional Equipment Apply Anti-Seize Lubricant. Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: 0--0 Revisions /0 JRD MODEL 0 Park Brake Kit A K0PB/0-0

12 NOTE: The longest threaded rod on Item # Wheel-Loc Hub, goes through this hole on Item # Plate WA. 0 0 Note: All hardware is Grade, plated and course thread unless otherwise specified. Revisions 0/ JRD MODEL 0 Optional Equipment K Transmission (REF.) TOP VIEW 0 Item Qty NSS Part # TURF TEQ LLC Wheel-Loc Kit A Bushing x. x Key/x. E--Clip Washer Machine x.x.0 Washer SAE Lock Washer / Washer / Machine / x / x.0 Jam Nut / Fine Thread Lug Nut / Fine Thread Spacer Spring C-- Engagement WA Spacer Wheel Engagement Hub WA Plate WA Spacer Wheel-Loc Hub Description Date: 0-- K0WL/0-0 0

Optional Equipment Note: All hardware is Grade, plated and course thread unless

13 Note: Items,,,,,, and are standard on all machines and are not part of the optional kit Install nut so there is / gap between 0 and. Optional Equipment Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Revisions 0/ JRD MODEL 0 Differential-Loc Kit A Date:0-- K0DL/0-0

14 (Ref. only) 0 Apply Anti-Seize Lubricant. Supplied With Lift Arm (Item #). Note: All hardware is Grade, plated and course thread unless otherwise specified. TURF TEQ LLC Date: --0 Revisions /0 JRD MODEL 0 Broom/Edger Lift Kit A K0LK/0-0

MULTI USE TRACTOR PARTS CATALOG MODEL 1305 SERIAL NUMBER AND ABOVE

MULTI USE TRACTOR PARTS CATALOG MODEL 0 SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0TR--0--0 Contents Part Number Description Page Number 0--0... Sector A... 0--0... Engine A... 0--0... Hydro Handle A...