PARKING type SC. The polyester concrete drainage channel with 2mm protective edge profi le IMC SC EN

Transcription

1 type SC The polyester concrete drainage channel with 2mm protective edge profi le IMC SC EN

2 ARKING Due to their low weight, high strength, good chemical resistance and integrated galvanised or stainless steel protective edge profi les, the polyester concrete channels from the STORA- range are the ideal solution for surface water drainage in areas with medium traffi c loads such as car parks, shopping streets, kerb sides, footpaths, etc.. The STORA- drainage channels are available 100mm wide with or without built-in fall. The 150mm, 200mm and 300mm wide channels are only available in one depth. The low weight of the channels as well as the tongue and groove jointing system simplify the installation. The wide range of inlay gratings available offers fl exibility for different situations. The STORA- channels type SC are suitable for loadings up to and including class C250. The quality of the channels and the matching gratings is guaranteed in accordance with EN1433. STORA- is available as follows: STORA- Width 100 Width 150 Width 200 Width 300 A15 B125 C type SC

3 C B D CANNES GAVANISED ROFIE Type SC100 (B=100 C=125 D=130) Vertical outlet on channel Units per pallet without grating Four-way junction Art slotted grating cast iron slotted grating galvanised 6 or 10mm slots galvanised ,4 Ø S , ,0 Ø S ,7 Ø S , ,85 Ø110 - yes S ,8 Ø S , ,4 Ø110 - yes S ,7 Ø S , ,0 Ø110 - yes S ,8 Ø S , ,0 Ø110 - yes S Type SC150 (B=150 C=180 D=190) Vertical outlet on channel Units per pallet without grating Four-way junction Art slotted grating cast iron 10 mm galvanised ,8 Ø SC , ,1 390x125 - yes SC Type SC200 (B=200 C=230 D=240) Vertical outlet on channel Type SC300 (B=300 C=328 D=338) Units per pallet without grating Four-way junction Art slotted grating cast iron 10 mm galvanised ,1 Ø SC , ,8 390x125 - yes SC Vertical outlet on channel Units per pallet without grating Four-way junction Art slotted grating cast iron 10 mm galvanised ,8 Ø SC , ,9 390x125 - yes SC Channel 0,5m = four-way junction - type SC 3

4 ARKING C B D CANNES WIT BUIT-IN FA GAVANISED ROFIE Type SC100 B=100 C=125 D=130 =1 m Fall 0,5% 1 2 Art. Vertical outlet on channel Connection to sump unit ,8 S ,1 S ,4 S ,7 S ,6 S Ø110 yes ,2 S ,9 S ,6 S ,9 S ,6 S Ø110 yes ,5 S ,1 S ,3 S ,1 S ,3 S Ø110 yes ,9 S ,2 S ,7 S ,8 S ,0 S Ø110 yes DRAIN type SC

5 GRATINGS FOR - type SC (Colour and fi nishing of the gratings may vary from the images.) For channel Type SC100 Grating type Material Slots/ Meshes Class ength Art Galvanised 10 mm A15 C ,6 S ,5 0,8 S ,2 S ,5 2,1 S Galvanised 6 mm A15 1 1,4 S ,5 0,7 S V Stainless steel 10 mm A15 C ,3 S ,5 0,7 S ,3 S ,5 2,2 S V Stainless steel 6 mm A15 1 1,6 S ,5 0,8 S zigzag Ductile iron 10 mm C250 0,5 4,0 S zigzag Ductile iron 6 mm C250 0,5 3,5 S erforated grating I Galvanised Ø 6 C ,5 S ,5 3,5 S type SC 5

6 ARKING For channel SC100 Grating type Material Slots/ Meshes Class ength Art Galvanised 33x15 mm B ,7 S ,5 1,4 S For channel Type SC150 Grating type Material Slots/ Meshes Class ength Art zigzag Ductile iron 12 mm C250 0,5 6,8 S Galvanised 22x33 mm B ,0 S ,5 2,1 S For channel Type SC200 Grating type Material Slots/ Meshes Class ength Art zigzag Ductile iron 12 mm C250 0,5 9,0 S Galvanised 33x22 mm C ,2 S ,5 4,5 S For channel Type SC300 Grating type Material Slots/ Meshes Class ength Art zigzag Ductile iron 10 mm C250 0,5 14,0 S Galvanised 22x33 mm B ,0 S ,5 7,5 S type SC

7 ANCORAGES For use in areas requiring class C250 loadings, gratings must be secured. Anchored gratings transfer the traffi c loads to the channel and assure a long lifetime. Non-anchored gratings can be lifted due to fastmoving traffi c. Each channel, =1m, has two recesses in which the locking bars fi t. For channel Type SC100 Anchorage type Material Anchorage Art. I For slotted (cast iron) grating and mesh grating. Galvanised M8x40 0,1 S M8x70 0,1 S For channel Type SC150 I Anchorage type Material Anchorage Art. For slotted (cast iron) grating and mesh grating. Galvanised M8x100 0,2 S For channel Type SC200 I Anchorage type Material Anchorage Art. For slotted (cast iron) grating and mesh grating. Galvanised M8x100 0,3 S For channel Type SC300 I Anchorage type Material Anchorage Art. For slotted (cast iron) grating and mesh grating. Galvanised M8x100 0,8 S type II galvanised - type SC 7

8 ARKING ENDCAS (with or without outlet) GAVANISED ROFIE For channel Type SC100 eight Installation before/after channel Art. Integrated In-/Outlet with gasket and E cover plate n 0 0,6 S n 1 to 5, n 03 1,2 SC Ø n 6 to 10, n 010 1,3 SC Ø n 11 to 15 1,4 SC Ø n 16 to 20, n 020 1,5 SC Ø n 030 1,5 SC Ø110 For channel Type SC150 eight For channel Type SC200 For channel Type SC300 Installation before/after channel Art. Integrated In-/Outlet with gasket and E cover plate All channels 1,8 SC Ø110 eight Installation before/after channel Art. Integrated In-/Outlet with gasket and E cover plate All channels 3,0 SC Ø160 eight Installation before/after channel Art. Integrated In-/Outlet with gasket and E cover plate All channels 4,4 SC Ø200 with integrated in-/outlet D without integrated in-/outlet (= closed) D STEED-FA SYSTEM For channel Type Installation before/after channel Art. SC /020/030 0,5 S type SC

9 SUM UNIT GAVANISED ROFIE Type SC100 Art. Outlets C B ateral outlet with rubber gasket and VC cap Ø110 Sump unit 0, ,4 S ateral preperforation both sides Ø110/160 Crosscut preperforation Ø110 Type SC150 D Bucket ,0 S Art. Outlets Channel with rectangular vertical outlet 0, ,1 SC x125 Gully ,0 S Ø110/Ø160/Ø200 Gully ,1 S Ø110/Ø160/Ø200 Bucket ,8 S Bucket ,6 S Type SC200 Art. Outlets Channel with rectangular vertical outlet 0, ,4 SC x125 Gully ,0 S Ø110/Ø160/Ø200 Gully ,1 S Ø110/Ø160/Ø200 Bucket ,8 S Bucket ,6 S Type SC300 Art. Outlets Channel with rectangular vertical outlet 0, ,0 SC x210 Gully ,2 S Ø160/Ø200/Ø225/Ø250 Gully ,0 S Ø160/Ø200/Ø225/Ø250 Bucket ,5 S Bucket ,0 S Foul-air trap Dia. Art. Ø110 1,0 S Ø160 3,2 S Ø200 4,0 S type SC 9

10 ARKING - type SC 10 OW DO YOU MAKE U A CANNE RUN? Ø Ø without built-in fall SC100 without built-in fall SC150/200/300 with built-in fall SC100

11 SECIFICATIONS (BASIC TEXT WIT OTIONS) - TYE SC Width 100 a) without built-in fall with restricted construction depth: height 100 mm ( 0) construction depth depends on the channel type: height 100mm = 0 height 160mm = 03 height 195mm = 010 height 245mm = 020 height 295mm = 030 b) with built-in fall of 0,5% ( 1 to 20) height 150 up to 250 Options STORA- W100: sump unit width with galvanised or stainless steel bucket - with or without foul-air trap (dia. Ø110 or Ø160) gratings class A15, B125 or C250 anchorages type I Width 150 without built-in fall height of the channels: 195mm Options STORA- W150: four-way junction with rectangular vertical outlet in combination with gully height 350mm or 700mm - with galvanised steel bucket - with or without foul-air trap (dia. Ø110, Ø160 or Ø200) gratings class B125 or C250 anchorages type I Width 200 without built-in fall height of the channels: 240mm Options STORA- W200: four-way junction with rectangular vertical outlet in combination with gully height 350mm or 700mm - with galvanised steel bucket - with or without foul-air trap (dia. Ø110, Ø160 or Ø200) gratings class C250 anchorages type I Width 300 without built-in fall height of the channels: 295mm Options STORA- W300: four-way junction with rectangular vertical outlet in combination with gully, height 350mm or 700mm - with galvanised steel bucket - with or without foul-air trap (dia. Ø160 or Ø200) gratings class B125 or C250 anchorages type I - type SC 11

12 ARKING 12 - type SC IMCOMA S.A. Zwaarveld 32 (B) 9220 amme Tel.: Fax: info@imcoma.com