Reinforced edge channels KE-100

Size: px

Start display at page:

Download "Reinforced edge channels KE-100"

Clarissa Burns
6 years ago
Views:

Drainage with system Technical data sheet

provides custom solutions and possibilities

Here you benefit from reliable cooperation

1 Drainage with system Technical data sheet Reinforced edge channels KE-100 ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation with our technical office staff and good contact with the field staff. ANRIN is certified according to DIN EN ISO 9001:2008. ANRIN DIRECT CONTACT: +49 (0)

2 Channel drainage for the load classes A 15 to E 600 According to DIN / EN 1433 Drainage channels for vehicular and pedestrian areas, these surfaces are assigned to specific load classes depending on the use. Accordingly, the respective suitable ANRIN reinforced edge system can be selected with the corresponding cover grating. Product specifications Product specifications Material Height Edge type Nominal width Resin concrete 50 and , 8.0, 10.0, Steel edge rail, 6 mm edge width; galvanised, stainless steel or cataphoretic dip-coated in black 100 mm Load class A 15 to E 600 Slope type Joint type Fastening Slope invert 0.5 %, Stepped invert, Constant invert UNILINK joint TwistLock fastening Material properties Channel / component body Polymer concrete: Compressive strength: Bending tensile strength: Modulus of elasticity: Density: Heat resistance: Frost resistance: Water penetration depth: polyester resin-based with mineral aggregates, additives > 90 N/mm² > 22 N/mm² ca. 25 kn/mm² g/dm³ 100 C (permanent loading) -50 C 0 mm Water absorption: 0.05 % Edge protection Edge protection: Galvanised steel, stainless steel, profile thickness 6 mm or cataphoretic dip-coated in black Channel cover Channel cover: Galvanised steel, V2A stainless steel, GJS cast-iron, PA plastic ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 2 / 16

3 ANRIN DRAIN Reinforced edge channels Slope types Area drainage with channel runs is normally made according to 3 different principles. The slope of water surface is achieved by the natural fall of the land. The water flows downwards with the gradient of the water level. A stepped invert is realised by an artificial gradient which is formed by the installation of stepped-height channels and connectors. The high flow rate with self-cleaning effect can be achieved with channels in natural slope. All slope types can be combined according to hydraulic requirements and topographical conditions. Stepped invert 50 channels with perforations for the corner connections Step connector Installation direction can be changed at any point without adapter End cap End wall with pipe connection DA/OD channel with pipe connection DA/OD 160 Sump units for all installation heights with NBR rings for DA / OD 160 / 200 Constant invert 50 channels with perforations for the corner connections Sump assembly top, raiser and base Installation direction can be changed at any point without adapter End cap End wall with pipe connection DA/OD channel with pipe connection DA/OD 160 Sump assembly intermediate piece with DA / OD 160 perforation Sump assembly base with NBR rings for DA / OD 160 / R 50 channel with pipe connection DA/OD 160 Sump units for all installation heights with NBR rings for DA / OD 160 / 200 Slope invert Step connector 100 channels with slope invert 50 channels with perforations for the corner connections End cap End wall with pipe connection DA/OD channel with pipe connection DA/OD 110 Sump units for all installation heights with NBR rings for DA / OD 110 / 160 ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 3 / 16

4 Channel dimensions h h h 110 Accessories dimensions ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 4 / 16

5 Channel types - KE-100 with galvanised steel edge rail Slope % Height KE-100 Channel No. 0* KE-100 Channel No. 0R*** KE-100 Channel No. 005**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 5* KE-100 Channel No. 05* KE-100 Channel No. 05R*** KE-100 Channel No. 055**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 10* KE-100 Channel No. 010* KE-100 Channel No. 010R*** KE-100 Channel No. 0105**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 15* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 20* KE-100 Channel No. 020* KE-100 Channel No. 020R*** KE-100 Channel No. 0205**/* KE-100 Channel No. 060* KE-100 Channel No. 060R*** KE-100 Channel No. 080* KE-100 Channel No. 080R*** KE-100 Channel No. 0100* KE-100 Channel No. 0100R*** * Channel with mouldings for vertical outlet DA/OD 110 ** Channel with sidewise perforations for the connection of t-junctions, elbow joints and cross- over joints and vertical outlet *** Channel with vertical pipe socket DA/OD 110 ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 5 / 16

6 Accessories - KE-100 with galvanised steel edge rail Height KE-100 Sump unit with galvanised mud bucket KE-100 Sump unit low height for channels up to No KE-100 Sump unit low height with special DN 110 connection & PE bucket Pipe socket DA/OD Pipe socket DA/OD KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 Closed end cap for No KE-100 end cap with pipe socket DA/OD 110 for channel No KE-100 end cap with pipe socket DA/OD 110 for channel No. 5, KE-100 end cap with pipe socket DA/OD 110 for channel No.10, KE-100 end cap with pipe socket DA/OD 110 for channel No. 20, KE-100 end cap with pipe socket DA/OD 50 for channel No KE-100 end cap with pipe socket DA/OD 50 for channel No KE-100 Step connector for compensating level differences Odour trap made from PVC DN Odour trap made from PVC DN Odour trap with leaf screen ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 6 / 16

7 Channel types - KE-100 with stainless steel edge rail Slope % Height KE-100 Channel No. 0* KE-100 Channel No. 0R*** KE-100 Channel No. 005**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 5* KE-100 Channel No. 05* KE-100 Channel No. 05R*** KE-100 Channel No. 055**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 10* KE-100 Channel No. 010* KE-100 Channel No. 010R*** KE-100 Channel No. 0105**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 15* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 20* KE-100 Channel No. 020* KE-100 Channel No. 020R*** KE-100 Channel No. 0205**/* KE-100 Channel No. 060* KE-100 Channel No. 060R*** KE-100 Channel No. 080* KE-100 Channel No. 080R*** KE-100 Channel No. 0100* KE-100 Channel No. 0100R*** * Channel with mouldings for vertical outlet DA/OD 110 ** Channel with sidewise perforations for the connection of t-junctions, elbow joints and cross- over joints and vertical outlet *** Channel with vertical pipe socket DA/OD 110 ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 7 / 16

8 Accessories - KE-100 with stainless steel edge rail Height KE-100 Sump unit with galvanised mud bucket KE-100 Sump unit low height for channels up to No Pipe socket DA/OD Pipe socket DA/OD KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 end cap with pipe socket DA/OD 110 for channel No KE-100 end cap with pipe socket DA/OD 110 for channel No. 5, KE-100 end cap with pipe socket DA/OD 110 for channel No.10, KE-100 end cap with pipe socket DA/OD 110 for channel No. 20, KE-100 end cap with pipe socket DA/OD 50 for channel No KE-100 end cap with pipe socket DA/OD 50 for channel No KE-100 Step connector for compensating level differences Odour trap made from PVC DN Odour trap made from PVC DN Odour trap with leaf screen ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 8 / 16

9 Channel types - KE-100 with black cataphoretic dip coated steel edge rail Slope % Height KE-100 Channel No. 0* KE-100 Channel No. 0R*** KE-100 Channel No. 005**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 5* KE-100 Channel No. 05* KE-100 Channel No. 05R*** KE-100 Channel No. 055**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 10* KE-100 Channel No. 010* KE-100 Channel No. 010R*** KE-100 Channel No. 0105**/* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 15* KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No KE-100 Channel No. 20* KE-100 Channel No. 020* KE-100 Channel No. 020R*** KE-100 Channel No. 0205**/* KE-100 Channel No. 060* KE-100 Channel No. 060R*** KE-100 Channel No. 080* KE-100 Channel No. 080R*** KE-100 Channel No. 0100* KE-100 Channel No. 0100R*** * Channel with mouldings for vertical outlet DA/OD 110 ** Channel with sidewise perforations for the connection of t-junctions, elbow joints and cross- over joints and vertical outlet *** Channel with vertical pipe socket DA/OD 110 ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 9 / 16

10 Accessories - KE-100 with black cataphoretic dip coated steel edge rail Height KE-100 Sump unit with galvanised mud bucket KE-100 Sump unit low height for channels up to No Pipe socket DA/OD Pipe socket DA/OD KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 Closed end cap for channel No KE-100 end cap with pipe socket DA/OD 110 for channel No KE-100 end cap with pipe socket DA/OD 110 for channel No. 5, KE-100 end cap with pipe socket DA/OD 110 for channel No.10, KE-100 end cap with pipe socket DA/OD 110 for channel No. 20, KE-100 end cap with pipe socket DA/OD 50 for channel No KE-100 end cap with pipe socket DA/OD 50 for channel No KE-100 Step connector for compensating level differences Odour trap made from PVC DN Odour trap made from PVC DN Odour trap with leaf screen ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 10 / 16

Cover gratings for KE-100 Slotted steel grating, Double slotted steel

100, SW 10 mm Longitudinal bar grating, galvanised, stainless steel Load

steel Load classes: B 125, C 250, D 400, : 50, 100 MW 30 x 14 mm / 30 x

classes: B 125, : 50, 100, SW 13 mm Slotted plastic grating, Oval Grip

grating, Oval Grip Design, plastic Load classes: B 125, C 250, : 50, SW 8

SW 10 mm Stegrost, OvalGrip Design, cast iron, cataphoretic dip coating

drainage of busy roads SW = slot width / MW = mesh width ANRIN GmbH

11 Cover gratings for KE-100 Slotted steel grating, Double slotted steel grating, galvanised, stainless steel Load classes: A 15, C 250, : 50, 100, SW 10 mm Longitudinal bar grating, galvanised, stainless steel Load classes: A 15, : 50, 100, SW 11 mm Mesh grating, galvanised, stainless steel Load classes: B 125, C 250, D 400, : 50, 100 MW 30 x 14 mm / 30 x 10 mm / 20 x 14 mm Cross-bar grating, galvanised, stainless steel Load classes: B 125, : 50, 100, SW 13 mm Slotted plastic grating, Oval Grip Design, plastic Load classes: B 125, C 250, : 50, SW 8 mm Slotted plastic grating, Oval Grip Design, plastic Load classes: B 125, C 250, : 50, SW 8 mm Stegrost SW 10, cast iron, coated in black Load classes: C 250, : 50, SW 10 mm Stegrost, OvalGrip Design, cast iron, cataphoretic dip coating Load classes: C 250, E 600*, : 50, SW 10 mm * Exception: Cross-road drainage of busy roads SW = slot width / MW = mesh width ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 11 / 16

12 Cover gratings for KE-100 Perforated grating, galvanised, stainless steel Load classes: C 250, : 50, 100, Ø 6 mm Slotted cast iron grating, cast iron, cataphoretic dip coating Load classes: D 400*, : 50, MW 25 x 10 mm Design grating, LEAF, cast iron, uncoated Load classes: C 250, : 50, SW 11 mm Design grating, CELTIC, cast iron, cataphoretic dip coating Load classes: C 250, : 50, SW 9 mm Slotted grating, HEELGUARD, cast iron, cataphoretic dip coating Load classes: D 400*, : 50, SW 6 mm Slotted steel grating, MASSIV 32, cast iron, uncoated Load classes: E 600*, : 50, SW 11 mm * Exception: Cross-road drainage of busy roads SW = slot width / MW = mesh width ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 12 / 16

13 Cover gratings cl. A15 with TwistLock fastening Inlet Ø ²/m Slotted steel grating, galvanised, SW 10 mm Slotted steel grating, galvanised, SW 10 mm Slotted steel grating, stainless steel, SW 10 mm Slotted steel grating, stainless steel, SW 10 mm Longitudinal bar grating, galvanised, SW 11 mm Longitudinal bar grating, galvanised, SW 11 mm Longitudinal bar grating, stainless steel, SW 11 mm Longitudinal bar grating, stainless steel, SW 11 mm Cover gratings cl. B125 with TwistLock fastening Inlet Ø ²/m Mesh grating, galvanised, MW 30 x 14 mm Mesh grating, galvanised, MW 30 x 14 mm Cross-bar grating, galvanised, SW 13 mm Cross-bar grating, galvanised, SW 13 mm Cross-bar grating, stainless steel, SW 13 mm Cross-bar grating, stainless steel, SW 13 mm Slotted plastic grating, Oval Grip Design Cover gratings cl. C250 with TwistLock fastening Inlet Ø ²/m Double slotted steel grating, galvanised steel, SW 10 mm Double slotted steel grating, galvanised steel, SW 10 mm Double slotted steel grating, stainless steel, SW 10 mm Double slotted steel grating, stainless steel, SW 10 mm Mesh grating, galvanised steel, MW 30 x 10 mm Mesh grating, galvanised steel, MW 30 x 10 mm Mesh grating, stainless steel, MW 20 x 14 mm Mesh grating, stainless steel, MW 20 x 14 mm Slotted cast iron grating, GJL, SW 10 mm Slotted cast iron grating, Oval Grip Design, SW 10 mm Slotted plastic grating, Oval Grip Design, SW 8 mm Perforated grating, galvanised steel Perforated grating, galvanised steel Perforated grating, stainless steel Perforated grating, stainless steel Design grating, LEAF, cast iron, uncoated Design grating, CELTIC, cast iron, cataphoretic dip coating ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 13 / 16

14 Cover gratings cl. D400 1 with TwistLock fastening Inlet Ø ²/m Mesh grating, galvanised steel, MW 20 x 14 mm Mesh grating, galvanised steel, MW 20 x 14 mm Mesh grating, stainless steel, MW 20 x 14 mm Mesh grating, stainless steel, MW 20 x 14 mm Longitudinal bar grating, GJL, SW 10 mm Slotted grating, HEELGUARD, cast iron, cataphoretic dip coating Exception: Cross-road drainage of busy roads Cover gratings cl. E600 1 with TwistLock fastening Inlet Ø ²/m Slotted cast iron grating, Oval Grip Design, SW 10 mm Slotted steel grating, MASSIV 32, cast iron, uncoated Exception: Cross-road drainage of busy roads Cover gratings with TwistLock fastening - Accessories Inlet Ø ²/m KE-/KF-/KS-100 TwistLock fastening, single ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 14 / 16

ANRIN DRAIN Reinforced edge channels Example installations The following installation guidelines are schematic representations.

The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology.

The example details are simplified recommendations for execution. Constructions are to be re-created on a project-specific basis.

4 8 6 100 100 2 100 100 2 100 3 100 3 4 4 Load class B 125 Road concrete and / or concrete sheets or paving bed Cast asphalt 1 7 approx. 4 5 approx.

15 ANRIN DRAIN Reinforced edge channels Example installations The following installation guidelines are schematic representations. These are provided as examples and are nonbinding. The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology. Despite this, designers and planners are always obligated to check the products and the installation instructions for their appropriateness. The example details are simplified recommendations for execution. Constructions are to be re-created on a project-specific basis. Important: Insert gratings for the installation. Load class A 15 Road concrete and / or concrete sheets or paving bed Cast asphalt 1 7 approx. 4 5 approx Load class B 125 Road concrete and / or concrete sheets or paving bed Cast asphalt 1 7 approx. 4 5 approx In-situ road concrete 2 Base course 3 Concrete cladding of the channel body B 25 Concrete class C12/15 (A 15 C 250) Concrete class C12/25 (D 400 E 600) 4 Foundation, mature soil 5 Prefabricated concrete sheets and / or stone systems 6 Paving bed 7 Wearing course 8 Bonding course 9 Bitumen base course All length specifications in millimetres ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 15 / 16

ANRIN DRAIN Reinforced edge channels Load class C 250 Road concrete and / or concrete sheets or paving bed Cast asphalt 1 7 approx. 4 5 6 approx.

Concrete class C12/25 (D 400 E 600) 4 Foundation, mature soil 5 Prefabricated concrete sheets and / or stone systems 6 Paving bed 7 Wearing course 8 Bonding course

Drainage channels for vehicular and pedestrian areas... RStO Guidelines for the standardisation of the superstructure of vehicular areas DIN EN 206-1 Concrete.

16 ANRIN DRAIN Reinforced edge channels Load class C 250 Road concrete and / or concrete sheets or paving bed Cast asphalt 1 7 approx approx Load class D 400 E 600 (Exception: Cross-road drainage of busy roads) Road concrete and / or concrete sheets or paving bed Cast asphalt 1 7 approx approx In-situ road concrete 2 Base course 3 Concrete cladding of the channel body B 25 Concrete class C12/15 (A 15 C 250) Concrete class C12/25 (D 400 E 600) 4 Foundation, mature soil 5 Prefabricated concrete sheets and / or stone systems 6 Paving bed 7 Wearing course 8 Bonding course 9 Bitumen base course All length specifications in millimetres Guidelines and regulations DIN EN 1433 Drainage channels for vehicular and pedestrian areas DIN Drainage channels for vehicular and pedestrian areas... RStO Guidelines for the standardisation of the superstructure of vehicular areas DIN EN Concrete. Specification, performance, production and conformity DIN EN Concrete, reinforced and prestressed concrete structures. Part 2: Concrete Specification, properties, production and conformity; Application rules for DIN EN ANRIN GmbH Siemensstrasse 1 D Anröchte Phone: +49 (0) Page 16 / 16

Stability and Diversity

Page 18 BIRCOsir NW BIRCOsir NW Stability and Diversity Channel elements 1% internal inbuilt fall steel angle (V2A, combi-closure system not in V2A) 180 3 250 50 50 Nr. 0/0 Nr. 15 Channel no. 1 0 mm /