TECHNICAL type SE. The polyester concrete drainage channel with 4mm protective edge profi le IMC SE EN
|
|
|
- Jayson Holland
- 5 years ago
- Views:
Transcription
1 TECNICA type SE The polyester concrete drainage with 4mm protective edge profi le IMC SE 5-5 EN
2 TECNICA SE - SE5 - SE2 - SE3 EN 433 Class D4 - E6 Due to their low weight, high strength, good chemical resistance and integrated galvanised or stainless steel protective edge profi les, the polyester concrete s from the STORA-TECNICA range are the ideal solution for surface water drainage in areas with medium to heavy traffi c loads. The STORA-TECNICA range offers solutions for surface water drainage in areas such as business parks, industrial estates and car parks that require the ability to withstand occasional heavy loadings. The STORA-TECNICA drainage s are available in mm, 5 mm, 2 mm and 3mm width. The low weight of the s as well as the tongue and groove jointing system simplify the installation. The wide range of inlay gratings available offers fl exibility for different situations. The STORA-TECNICA s type SE are suitable for loadings up to and including class E6. The quality of the s and the matching gratings is guaranteed in accordance with EN433. STORA-TECNICA is available as follows: STORA-TECNICA Width Width 5 Width 2 Width 3 D4 E6 2 TECNICA - type SE
3 C TECNICA SE - SE5 - SE2 - SE3 EN 433 Class D4 - E6 B CANNES CONSTANT DEPT GAVANISED PROFIE Type SE (B= C=25 D=55) (m) Weight (kg) Vertical outlet on Units per pallet Four-way junction Art Slotted grating cast iron 6 mm sleeve Mesh grating galva 89 6,5 Ø 44 - SE3,5 89 3,8 Ø - ja SE4 stainless steel profi le on request Type SE5 (B=5 C=8 D=2) (m) Vertical outlet on Units per pallet Four-way junction Art Mesh grating galva ,7 Ø SE ,8 Ø SE ,6 Ø SE53 -, , 39 x 25 - ja SE54 stainless steel profi le on request Type SE2 (B=2 C=23 D=26) (m) Vertical outlet on Units per pallet Four-way junction Art Mesh grating galva - 3 2, Ø SE2 -,5 3, SE22-8 3,8 Ø SE ,5 Ø SE ,2 Ø2 2 - SE25 -,5 3 29,5 39 x 3 - ja SE26 stainless steel profi le on request Type SE3 (B=3 C=328 D=36) (m) Vertical outlet on Units per pallet Four-way junction Art Mesh grating galva ,5 Ø2 2 - SE , Ø2 5 - SE ,2 Ø2 5 - SE33 -, , 39 x 2 - ja SE34 stainless steel profi le on request Channel,5m = four-way junction TECNICA - type SE 3
4 TECNICA SE - SE5 - SE2 - SE3 EN 433 Class D4 - E6 GRATINGS FOR TECNICA - type SE (Colour and fi nishing of the gratings may vary from the images.) For Type SE Grating type Material Sleeve/Mesh Class (m) Art Slotted grating Ductile iron 6 mm E6,5 5,8 S2623 Mesh grating Galvanised 22 x 33 mm D4 7, S253,5 3,6 S254 stainless steel grating on request For Type SE5 Grating type Material Sleeve/Mesh Class (m) Art Mesh grating Galvanised 22x33 D4 9,5 S2553,5 5, S2554 stainless steel grating on request For Type SE2 Grating type Material Sleeve/Mesh Class (m) Art Mesh grating Galvanised 22 x 33 mm E6 9,5 S2523,5 5, S2524 stainless steel grating on request For Type SE3 Grating type Material Sleeve/Mesh Class (m) Art Mesh grating Galvanised 22 x 33 mm D4 6,5 S2533,5 8,5 S2534 stainless steel grating on request 4 TECNICA - type SE
5 TECNICA SE - SE5 - SE2 - SE3 EN 433 Class D4 - E6 ANCORAGES For use in areas requiring loadings up to class E6, gratings must be secured. Anchored gratings transfer the traffi c loads to the and assure a long lifetime. Non-anchored gratings can be lifted due to fastmoving traffi c. Each, =m, has two recesses in which the locking bars fi t. type I galvanised For Type SE I Anchorage type Material Anchorage Art. For slotted grating, mesh grating and cast iron grating Galvanised M8x7, S5 For Type SE5 I Anchorage type Material Anchorage Art. For slotted grating, mesh grating and cast iron grating Galvanised M8x,2 S5 For Type SE2 I Anchorage type Material Anchorage Art. For slotted grating, mesh grating and cast iron grating Galvanised M8x,3 S52 For Type SE3 I Anchorage type Material Anchorage Art. For slotted grating, mesh grating and cast iron grating Galvanised M8x,8 S53 STEPPED-FA SYSTEM For TYPE Installation before/after Art. SE5 S =7-22, of ,3 S39 SE5 S2 =7 tot 27, S39 SE2 S =8-24, of ,3 S38 SE2 S2 =8 tot 3,5 S38 SE3 S =245-35, of ,8 S4 SE3 S2 =245 tot 365 2,5 S4 S S2 TECNICA - type SE 5
6 TECNICA SE - SE5 - SE2 - SE3 EN 433 Class D4 - E6 ENDCAPS (with or without outlet) GAVANISED PROFIE For Type SE eight Installation before/after Integrated In-/Outlet with gasket and PE cover plate 85 n,2 SE32 Ø For Type SE5 eight Installation before/after Integrated In-/Outlet with gasket and PE cover plate - 7 =7,7 SE56 Ø - 22 =22 2,4 SE57 Ø - 27 =27 2,5 SE58 Ø6 For Type SE2 eight Installation before/after Integrated In-/Outlet with gasket and PE cover plate - 3 =3 2,5 SE =8 2,3 SE29 Ø - 24 =24 2,8 SE2 Ø6-3 =3 3,6 SE2 Ø6 For Type SE3 eight Installation before/after Integrated In-/Outlet with gasket and PE cover plate =245 4,5 SE36 Ø6-35 =35 5, SE37 Ø2-365 =365 6, SE38 Ø2 D with integrated in-/outlet without integrated in-/outlet (closed) D 6 TECNICA - type SE
7 TECNICA SE - SE5 - SE2 - SE3 EN 433 Class D4 - E6 SUMP UNIT GAVANISED PROFIE Type SE (m) GAVA Stainl.Steel Stainl.Steel Outlets C B ateral outlet with rubber gasket and PVC cap Ø ateral preperforation both sides Ø/6 D Sump unit,5 59 3,6 SE9 - - Crosscut preperforation Ø Bucket,5 24,8 S233,8 S233 - Type SE5 (m) Outlets Channel with rectangular vertical outlet, , SE54 - Gully, ,9 S7 Ø6/Ø2/Ø225/Ø25 Gully,5 7 5,5 S72 Ø6/Ø2/Ø225/Ø25 Bucket,5 35 4,2 S73 - Bucket,5 6 5, S74 - Type SE2 (m) Outlets Channel with rectangular vertical outlet,5 3 29,5 SE26 - Gully, ,9 S7 Ø6/Ø2/Ø225/Ø25 Gully,5 7 5,5 S72 Ø6/Ø2/Ø225/Ø25 Bucket,5 35 4,2 S73 - Bucket,5 6 5, S74 - Type SE3 (m) Outlets Channel with rectangular vertical outlet, , SE34 - Gully, ,9 S7 Ø6/Ø2/Ø225/Ø25 Gully,5 7 5,5 S72 Ø6/Ø2/Ø225/Ø25 Bucket,5 35 6,2 S73 - Bucket,5 6 7,5 S74 - Foul-air trap Dia. For sump unit Ø SE, S75 Ø6 SE ,2 S76 Ø2 SE2-3 4, S77 TECNICA - type SE 7
8 TECNICA OW DO YOU MAKE SE UP A - CANNE SE5 - SE2 RUN?- SE3 SE SE5/2/ S S2 S Ø Ø SPECIFICATIONS (BASIC TEXT WIT OPTIONS) TECNICA-TYPE SE Width construction depth: height 89mm = Options STORA-TECNICA W: sump unit width - with galvanised or stainless steel bucket - with or without foul-air trap (dia. Ø or Ø6) gratings class D4 or E6 anchorages type I Width 5 height of the s: 7, 22 and 27mm Options STORA-TECNICA W5: four-way junction with rectangular vertical outlet in combination with gully, height 35mm or 7mm - with galvanised steel bucket - with or without foul-air trap (dia. Ø6 or Ø2) gratings class D4 anchorages type I Width 2 height of the s: 3, 8, 24 and 3mm Options STORA-TECNICA W2: four-way junction with rectangular vertical outlet in combination with gully, height 35mm or 7mm - with galvanised steel bucket - with or without foul-air trap (dia. Ø6 or Ø2) gratings class E6 anchorages type I 8 Width 3 height of the s: 245, 35 and 365mm Options STORA-TECNICA W3: four-way junction with rectangular vertical outlet in combination with gully, height 35mm or 7mm - with galvanised steel bucket - with or without foul-air trap (dia. Ø6 or Ø2) gratings class D4 anchorages type I TECNICA - type SE IMCOMA S.A. Zwaarveld 32 (B) 922 amme Tel.: Fax: info@imcoma.com
PARKING type SC. The polyester concrete drainage channel with 2mm protective edge profi le IMC SC EN
type SC The polyester concrete drainage channel with 2mm protective edge profi le IMC SC 18-07 EN ARKING Due to their low weight, high strength, good chemical resistance and integrated galvanised or stainless
STORA-DRAIN PARKING POLYESTER CONCRETE DRAINAGE CHANNEL GALVANIZED PROFILE
05 WITH POLYESTER CONCRETE DRAINAGE CHANNEL GALVANIZED PROFILE 05 A15 / / POLYESTER CONCRETE DRAINAGE CHANNEL WITH GALVANIZED PROFILE Due to their low weight, high strength, good chemical resistance and
h2* linear fall up to 20 m, stepped fall, without fall Loading classes: A 15, B 125, C 250 to EN 1433
MEADRAIN Supreme System Z 1000 Technical Data 500 130 100 1000 0 h* h1* h* h1* 1 85 (100) 1 85 (100) 1 h1* = Total height 1 h* = Total height Material properties Channel body Polymer concrete based on
Uniclass L L2123 EPIC J3413. CI/SfB (52.5) If9. Surface drainage for heavy duty traffic applications ACO RoadDrain
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) If9 Surface drainage for heavy duty traffic applications ACO RoadDrain ACO RoadDrain CHANNEL DRAINS Load Class (BS EN 1433:2002) Optimum solution ACO RoadDrain
ACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L2123 + L7315 CI/SfB (52.5) EPIC J3413 ACO MultiDrain MD ACO MultiDrain MD - channel drainage system Product Overview ACO MultiDrain MD System Product
Reinforced edge channels KE-100
Drainage with system Technical data sheet Reinforced edge channels KE-100 ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation
MEARIN 100. Drainage Systems MEARIN
MEARIN Drainage Systems Material: Fiberglass Locking System: STANDARD lock bar system Accessories: Silt box Corner unit Trap Installation bracket MEARIN 100 WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
Complete Drainage Channels with Galvanized Slotted Grating. Product Dimension Product # lbs/ Description l x h [in] unit
![Complete Drainage Channels with Galvanized Slotted Grating. Product Dimension Product # lbs/ Description l x h [in] unit](/thumbs/95/125406958.jpg "Complete Drainage Channels with Galvanized Slotted Grating. Product Dimension Product # lbs/ Description l x h [in] unit")
MEARIN 100 Complete Clear Width: 4" interior Total Width: 5.3" Material: Fiberglass Grating: Galvanized Slotted grating cover included Fall Options: Available without fall Locking System: Top Fix Snap
Stability and Diversity
Page 18 BIRCOsir NW BIRCOsir NW Stability and Diversity Channel elements 1% internal inbuilt fall steel angle (V2A, combi-closure system not in V2A) 180 3 250 50 50 Nr. 0/0 Nr. 15 Channel no. 1 0 mm /
FASERFIX STANDARD. Solid drainage channel for easy self-installation, predominantly in private areas.
C IVI L S L A N DS CA PI N G AQ UA S P O RT FASERFIX Solid drainage channel for easy selfinstallation, predominantly in private areas. C IVI L S L A N DS CA PI N G AQ UA S P O RT FASERFIX Solid drainage
SURFACE DRAINAGE PRODUCTS
CSOL10GB SURFAC DRAINAG PRODUCTS BUILDING SANITARY NVIRONMNT UV resistant with an A15 loading class PVC ground grids GRC30S GR25 Dimensions GRC20 GRC20S 200 x 200 10 GRC25 GRC25S 250 x 250 10 GRC30 GRC30S
ACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L3 + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD channel drainage system Technical Data ACO MultiDrain MD Introduction to the
MEA RIN Plus 100 and Expert 100. Technical data sheet. Material properties. Description and sizes. Edge protection MEARIN Plus
MEA RIN Plus and Expert Technical data sheet 136 0 Plus.1RW channel Plus.1 channel Plus.0 channel 158 Ø110 184 184 Ø110 Material properties Channel body and accessories SMC (sheet moulded compound) Glassfibre
sump units end caps and connectors 2018 PRICE LIST VIBRO-BASE / EVO SERIES R SERIES
sump units end caps and connectors VIBRO-BASE / EVO SERIES R SERIES 2018 PRICE LIST CONCRETE SUMP UNITS FOR VIBRO-BASE SERIES AND R SERIES CONFORMING TO THE EN 1433:2008 STANDARD CONCRETE SUMP UNIT COMPONENTS
F100K F150K F200K F250K F300K
362 156 206 262 100K 150K 200K 250K 300K SYSTEM APPICATIONS: MOTORWAYS AND AIRPORTS, OADING AND UNOADING AREAS, PORTS... s with attachment of the grating to the channel with 4 screws per grating, designed
Classes. Class A 15. Class B 125 CLASS C 250. Class D 400. Class E 600. Class F 900 A 15 B 125 C 250 D 400 E 600 F 900
Classes 0,2 MM MAX 0,5 MM MAX 0,5 MM MAX 0,2 MM MAX A15 B125 C250 D400 C250 B125 A15 A 15 Class A 15 Access covers and gratings capable of withstanding a 1.5 tonnes test load. For use in areas where only
ACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD Medium duty channel drainage system ACO MultiDrain MD Introduction to the ACO
ACO Water Management: Urban + Landscape Civils + Infrastructure
ACO Water Management: Urban + Landscape Civils + Infrastructure Uniclass L223 + L735 CI/SfB (52.5) EPIC J343 ACO Channel Lighting Systems ACO Channel Lighting Systems Technical Data ACO Channel Lighting
LANDSCAPING AQUA SPORT RECYFIX PLUS ROBUST, RECYCLED AND EASY TO INSTALL.
CIVILS LANDSCAPING AQUA SPORT PLUS ROBUST, RECYCLED AND EASY TO INSTALL. 8 THE ECOLOGICAL INNOVATION PLUS channels consist of 100 % re cycled polyethylene (PE) and polypropylene (PP). They can be integrated
MEADRAIN. Traffic System MEAKERB. Technical Data. Material properties. Description and sizes. Channel body. Top section
MEADRAIN Traffic System MEAKERB Technical Data 154 125 500 125 250 125 154 500 125 125 250 125 190 100 190 185 100 25 30 130 360 320 310 500 Material properties Channel body Polymer concrete Compression
MULTIV+ SYSTEM APPLICATIONS: SYSTEM SUITABLE FOR PEDESTRIAN AND SHOPPING AREAS, AS WELL AS PARKING AREAS FOR ALL TYPES OF VEHICLES.
MUTIV+ SYSTEM APPICATIONS: SYSTEM SUITABE FOR PEDESTRIAN AND SOPPING AREAS, AS WE AS PARKING AREAS FOR A TYPES OF VEICES. DRAINAGE EVOUTION The evolution of R&D processes and our 20+ years of experience
Road + Civils AG.UK.COM
Road + ivils AG.UK.OM Road + ivils Road + ivils drainage products AG.UK.OM DRAINAG PRODUTS PRODUT RANG Manhole Rings oncrete access chambers Shaft / Available depth of section chamber section DN 0.25m
RECYFIX PRO. Corrosion-free drainage system for private and public areas.
C IVI L S L A N DS CA PI N G AQ UA PRO Corrosionfree drainage system for private and public areas. S P O RT C IVI L S L A N DS CA PI N G AQ UA S P O RT PRO Corrosionfree drainage system for private and
Channel without outlet box for concrete, in-situ or tiled floor
Type 670. Product code definition 670 X X XXX-XX X X Channel without outlet box for concrete, in-situ or tiled floor The channel is made in the following standard widths: 147, 197, 297 and 397 mm internal
Reliable backwater protection. Protection from backwater. Backwater protection for interior installation
Reliable backwater protection Protection from backwater Backwater Protection - things you need to know Prevention Not properly protecting a building against backwater can result in damage that is extremely
Classes. Class A 15. Class B 125 CLASS C 250. Class D 400. Class E 600. Class F 900 A 15 B 125 C 250 D 400 E 600 F 900
lasses 0,2 MM MX 0,5 MM MX 0,5 MM MX 0,2 MM MX 15 B125 250 D400 250 B125 15 15 lass 15 ccess covers and gratings capable of withstanding a 1.5 tonnes test load. For use in areas where only pedestrians
ACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L223 + L735 CI/SfB (52.5) EPIC J343 ACO MultiDrain PPD ACO MultiDrain PPD channel drainage system Specification manual ACO MultiDrain PPD Introduction
Gullies. Box - Gutters. Slot - Gutters. Grease Locks
Gullies Box - Gutters Slot - Gutters Grease Locks 1 for Food Processing Specifically tailored waste water systems Box Gutters Stainless steel 1.4301. These time-tested models are available in two widths
TRADE PRICE LIST - 1st March Below Ground & Civils Systems
TRADE PRICE LIST - 1st March 2019 Below Ground & Civils Systems Introduction to Osma 2 Introduction 2 Acceptance 3 OsmaDrain 4-13 Building Drainage System 110-160 4-13 Osma UltraRib 14-17 Foul and Surface
TRADE PRICE LIST - 1st March Below Ground & Civils Systems
TRADE PRICE LIST - 1st March 2018 Below Ground & Civils Systems Introduction to Osma 2 Introduction 2 Acceptance 3 OsmaDrain 4-13 Building Drainage System 110-160 4-13 Osma UltraRib 14-17 Foul and Surface
CATALOGUE SEWAGE MANHOLES
CATALOGUE SC SEWAGE MANHOLES Table of contents TABLE OF CONTENTS Introduction 4 Inspection chamber, type 315 7 Inspection chamber, type 400 10 Inspection chamber, type 425 14 Assembly instruction 19 Catch
INDEX. Growing Beyond Boundaries 03
INDEX Company Profile 01 Facilities 02 Product Selector 04 Products at a glance 05 Category Carriageway/Telecom Covers 06 Square/Rectangular Frames and Covers 11 Circular Frames and Covers 22 Recessed
Aim higher. Soil & Waste System
Aim higher Soil & Waste System Driven by durability FACT Trend towards prefabrication In most countries the labour costs are becoming an increasing part of the total installed cost of a project. To keep
ACO Modular. ACO Product catalogue. Modular Stainless Steel Channel Drainage System. Modular 20. Modular 125. Modular 200. Floor Drainage systems
CO Modular Floor Drainage systems CO Product catalogue Modular Stainless Steel Channel Drainage System Modular 20 Modular 125 Modular 200 CO Modular Modular Stainless Steel Channel Drainage System System
Concrete Pipes 62 Traditional Manholes Sealed Manholes 66 Retaining Walls 67 Boc Culverts / Gully Pots 68 Inspection Chambers 69
Concrete Drainage & Accessories CPM Concrete Pipes 62 Traditional Manholes 63-65 Sealed Manholes 66 Retaining Walls 67 Boc Culverts / Gully Pots 68 Inspection Chambers 69 F P McCann Concrete Pipes / Precast
ACO Qmax Unit size
ACO Qmax 50 ACO Qmax 50 ACO Qmax 50 The ACO Qmax 50 channel is manufactured from recycled MDPE which is lightweight, chemically resistant and extremely robust. Its circular bore, ed push fit channel connections
DUCTILE IRON MANHOLE COVERS AND D GULLY G GRATINGS
DUCTILE IRN MNLE CVERS ND D GULLY G GRTINGS Produced and certified in compliance with the EN 124 standard. Manufactured in sites complying with a Quality ssurance System IS 9001. Manhole CVER EK DIP Product
Geberit Concealed cisterns
Factory setting Description Front actuation 12 cm thick cm thick 6/3l for Geberit Sigma actuator plates Page 4 /3l for Geberit Delta actuator plates Page 6 6 / 3 l for Geberit Sigma actuator plates Page
ProfilGate aqua design variations
ProfilGate aqua design variations A product of 1 ProfilGate aqua design variations Tray combinations Depending on the size of the desired ProfilGate aqua cleaning field, a single tray or a combination
SOLFLO MAX LINEAR COLLECTION Linear catch basin connected with double bell outlet with integrated gasket and clips (DBIGC)
LINEAR CAPTURE Perpendicular collection across the full width of a drainage surface such as a parking deck, street or sloped residential driveway. Excavation area and depth are less than for conventional
HYDRA-CELL PIT SYSTEM KNOCK-OUT PIT
HYDRA-CELL - 1050 PIT SYSTEM Page Ref: HC 01 C-M ROAD GULLY UNIT RISER MODULES for HYDRA-CELL 1050 Module Height 150mm 300mm 600mm 900mm 1200mm Jump pit Ø 1050 RISER ASPRO Ø 1050 HYDRA-CELL Ø 1050 HYDRA-CELL
1/4 5/16 3/8 1/2 3/ /4 1 1/ /2 3 4 M12-M16 M16-M20 M16-M20 M20 M25 M32 M40 M50 M63 M75 M90 M ,
Sealtite EF-M grey: Medium mechanical strength. Sealtite EF-M provides good mechanical protection for cables and wires on woodcutting, packaging and transporting machines as well as control boxes. The
Fiberglass Basins with Ballast Support Flange 24" thru 72" Dia. (.6m thru 1.8m)
Specifications: Fiberglass Basins with Ballast Support Flange 24" thru 72" Dia. (.6m thru 1.8m) Standard: Basin construction is custom molded fi berglass reinforced polyester resin. The wall thickness
Domestic Traditional Pits DOMESTIC TRADITONAL PITS
Domestic Traditional Pits Ideal for use under downpipes, as a junction box, or at the end of a surfacewater drainage channels Designed for large household surfacewater drainage Australian Made from 100%
LINEAR DRAINAGE. 50 years serving the construction industry
LINER DRINGE 50 years serving the construction industry Welcome Clark-Drain is renowned all over the world for the innovative drainage products it brings to the market. We have been offering intelligent
50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.
![50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.](/thumbs/73/69367420.jpg "50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.")
Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6
MEADRAIN Traffic CW 100
154 250 154 250 190 185 100 190 130 360 100 310 25 30 Material properties Channel unit o Polymer : o Compression resistance: o Flexural tensile strength: o Modules of elasticity: o Density: o Linear expansion
Water, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
Performance is not a question of consumption. The Schindler E 3 approach on energy, effi ciency and ecology for escalators and moving walks.
Performance is not a question of consumption. The Schindler E 3 approach on energy, effi ciency and ecology for escalators and moving walks. Schindler Escalators and Moving Walks E 3 One objective and
Hynds Telco and Electrical Pit System
Hynds Telco and Electrical Pit System Scan for more information Technical Guide SP1.1 Hynds Concrete Access Chambers and Lids are designed specifically for the telecommunication and electrical industries.
MANHOLE INDEX INDEX CONCRETE MANHOLE SPECIFICATIONS ASTM SPECIFICATIONS
MANHOLE INDEX INDEX M1...STANDARD STORM MANHOLE ASSEMBLY A1 M2...STANDARD MANHOLE ASSEMBLY A2 M3...CONICAL MANHOLE ASSEMBLY A3 M4...CONICAL MANHOLE ASSEMBLY A4 M5...CONICAL MANHOLE ASSEMBLY A5 M6...CONICAL
1¼" & 2" Break Away Fitting
Specifications: 1¼" & 2" reak Away Fitting With Stainless "C" Channel Guide Rails for Concrete and Fiberglass Installation, Standard and Non-Sparking reak Away Fittings The "C" channel guide rail assembly
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
FCC DUCTABLE AIR TREATMENT UNIT
FCC DUCTBLE IR TRETMENT UNIT DUCTBLE IR TRETMENT UNIT FCC 7 different sizes 3, 4 and 6 row coils 2 or 4 pipe system Horizontal installation ductable air treatment unit FCC series The ductable air treatment
FIREFLO - MODEL F-06 INSPECTION, INSTALLATION & MAINTENANCE MANUAL. Item No.s/Description
FIREFLO - MODEL F-06 INSPECTION, INSTALLATION & MAINTENANCE MANUAL Item No.s/Description Item No. Description Material Specification HYDRANT Qty. Req d Item No. Description Material Specification 1 Operating
2018 CATALOGUE CONCRETE PITS COVERS & GRATES ...& A WEALTH OF KNOWLEDGE. Phone:
2018 CATALOGUE CONCRETE PITS COVERS & GRATES...& A WEALTH OF KNOWLEDGE www.civilcast.com.au Phone: 02 9833 4999 ABOUT CIVILCAST Civilcast is an Australian owned company specialising in the supply of stormwater,
PIPE & CONDUIT SYSTEMS. Free Call:
PIPE & CONDUIT SYSTEMS Free Call: 1800 899 480 www.anchoragegroup.com.au Anchorage pipe supports are designed and manufactured in Australia by leading manufacturing company, Swift Metal Services. Offering
The specialist for fastening technology. Post holders NEW. to our product range
Post holders H post anchors H post anchors Fork width Dimensions a) Drill holes b) Art. no. (mm) Overall/Post support (mm) Post support (mm) PU 904722 91 600 x 60 / 300 4 x 11 904723 101 600 x 60 / 300
Regenerative Turbine Pumps
Bulletin 40 October 008 40 40 80 80 Series Regenerative Turbine Pumps Capacities to 60 GPM Heads to 800 Feet MTH PUMPS 40 40 80 80 Series regenerative turbine pumps represent the most economical, high
DACHFIX. Reliable water retention system for terraces, façades and flat roofs.
C IVI L S L A N DS CA PI N G AQ UA Reliable water retention system for terraces, façades and flat roofs. S P O RT C IVI L S L A N DS CA PI N G AQ UA S P O RT Reliable water retention system for terraces,
Simplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover
www.cranepumps.com Simplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover Specifications: inches (mm) BASIN...Fiberglass w/ 3 (76)
Overview. Bosch Rexroth Corp /11 Aluminum Framing. Linear Motion and Assembly Technologies. Section 8: Air Supply Elements
91 500 201 0/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Overview Air supply elements convert certain profiles into compressed air bars. Convenient and flexible pneumatic connections
ACO product catalogue. ACO Industrial Drainage
ACO product catalogue ACO Industrial Drainage ACO. The future of drainage. collect: Collect and remove clean: Pre-clean and process hold: Protect and attenuate release: Pump, discharge and reuse 2 ACO
Septic tanks A septic tank from Ri-Industries offers a number of benefits: Industries
Septic tanks A septic tank from Ri-Industries offers a number of benefits: Engineer-designed and built from fine tolerance steel moulds Tanks are made from 40 MPa concrete to give additional strength and
Inserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
Mini amateur football ground goals, street hockey goals, mobile, fully welded
Fully welded Mini amateur football ground goals, street hockey goals, mobile, fully welded GS-APPROVED Completely made of aluminium Extremely robust and low risk of injury Goal frame square profile 80
ENGINEERING AND EQUIPMENT FOR IRRIGATION
M a d e i n F r a n c e ENGINEERING AND EQUIPMENT FOR IRRIGATION 50 years of French experience and innovation Center pivot specialist since 1965: first European manufacturer Pionnier of the hippodrome
LED Meteor Pool Lights
LE Pool Lights LE Pool Lights The ARTECTA pool lights are the world's first compact ultra-thin LE underwater fixtures, equipped with an integrated driver. The fixtures can be mounted on a flat surface,
EN1401 Pipe & Fittings EN1401 Pipe & Fittings Quantum Pipe & Fittings 26-29
Plastic Drainage Polypipe Building s EN1401 Pipe & Fittings 10-20 Underground Drainage Systems Marley Plumbing & Drainage EN1401 Pipe & Fittings 22-24 Quantum Pipe & Fittings 26-29 Wavin OSMA EN1401 Pipe
ACO Polycrete Pty Ltd ACO A Global Company
ACO Polycrete Pty Ltd ACO A Global Company Manufacturing and supplying the construction industry The ACO Group ACO was established in 1946 to manufacture mineral building products such as terrazzo concrete,
Easy to Work With. Repair or replacement applications. Covers load tested to Australian Standards
Easy to Work With Range of covers to meet council requirements. An extensive range of products for new developments and repairs. Tested and Approved - you can count on Deks! Repair or replacement applications
ARBO CORROSION RESISTANT VERTICAL CENTRIFUGAL PUMPS BORN TO RESIST CORROSION
ARBO BORN TO RESIST CORROSION CORROSION RESISTANT VERTICAL CENTRIFUGAL PUMPS Corrosion resistant Without shaft seal Pump can be run dry Without bearing in liquid 1 - m 3 /h Heads up to 25 MWK PUMP CHARACTERISTICS
ACO pipe push-fit connection
ACO pipe is the ideal system for gray and black water, rainwater and industrial waste water drainage applications. When used with ACO gully and ACO channel systems, ACO pipe provides a unique, complex
Webtec Products Limited. Hydraulic Hand Pumps. Quality Hydraulic Components from the Webtec Range
Webtec Products Limited Hydraulic Hand Pumps Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. WHP-14 Series Hand Pumps 1 WPM-20 without Tank 3 WPM-25 Series Hand Pumps
Duplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover
www.cranepumps.com Duplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover Pre-Packaged Fiberglass Systems Specifications: inches (mm)
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
According to AWWA-standard
According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves - 310 Gate valves
Recessed Access Covers ACCESS COVERS & DRAINAGE SYSTEMS
Recessed Access Covers ACCESS COVERS & DRAINAGE SYSTEMS FACTA Class Table FACTA Class A EN124 Class GLW Wheel Loads Typical Applications Gross Laden Vehicle Weight (slow moving) Wheel Loads* (slow moving)
Apartment ventilation
GB1250 06.18 AuraFlex LØV-R Apartment ventilation Diffusers in steel Customer adapted diffuser pattern Available in all colours Plenum box with damper and measuring outlet for commissioning Plenum box
DUCTING & GRILLES CATALOGUE.
DUCTING & GRILLES CATALOGUE www.simx.co.nz TABLE OF CONTENTS DUCTING & GRILLES Ducting Label Guide 84 Unilok FR1 - Flexible Ducting 85 Unilok FR1 - Acoustic Ducting 8 Unilok FR1 - Quadroflex Ducting 87
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS
San Antonio Water System Standard Specifications for Construction ITEM NO. 834 FIRE HYDRANTS 834.1 DESCRIPTION: This item shall consist of fire hydrant installations using joint restraints in accordance
SPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
International GmbH. Line drainage PURADRAIN
International Gmb Line drainage PURADRAIN PURADRAIN PDG, Uniersal channel ith in-built slope LW 100 Uniersal polmer concrete channel ith galanized steel rails for medium loads from class A015 to class
Kent Ladder Grating. Recommended For:
Kent Ladder Kent Ladder Specify Specify: Kent Ladder KLG150; 150mm wide x 1000mm long x 25mm deep; Grade 316L Stainless Steel; See page 8 & 9 which shows how to create your own unique specification clause
Service Box Listings
Service Box Listings aeconcrete.com May 2017 Drawing Number Item Description Product Size (Length X Width X Depth in mm) B937-00-0305-C B937 Top / Extension 305 High 433 x 261 x 305 i.d. B937-00-0150-C
trench 0-60 FEET IN 6 SECTIONS 6 WIDE 9940 SERIES TRENCH DRAIN SYSTEM PRE-ASSEMBLED
ip trench 6 WIDE 9940 SERIES TRENCH DRAIN SYSTEM PRE-ASSEMBLED 0-60 FEET IN 6 SECTIONS ip trench 6 WIDE 9940 SERIES TRENCH DRAIN SYSTEM Zip Trench Features: Fast, long, pre-assembled runs shipped from
access hatches MADE IN THE USA
es W E C O V E R YO U R I N F R A S T R U C T U R E 800.626.4653 www.ejiw.com MADE IN THE USA table of contents ACCESS HATCH ALUMINUM SERIES ALN Series... 5 CLN Series... 6 CLS Series... 7 AHS Series...
G.F. Gordini srl Via E. Mattei, Bagnacavallo (RA) - Italy tel fax
ATTACHMENTS FOR OPERATING MACHINERY ATTACHMENTS FOR OPERATING MACHINERY G.F. Gordini srl Via E. Mattei, 4 48012 Bagnacavallo (RA) - Italy tel. +39 0545 62712 fax +39 0545 62140 www.gfgordini.com info@gfgordini.com
USS - External Louvre. Halton USS. External Louvre
Halton USS External Louvre External louvre for air intake and exhaust to prevent rain, snow, leaf and animal ingress Rainwater ingress penetration efficiency of approx. 95% (USS/I) Operation based on special
M50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
Side Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.
TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter
PURESTREAM SYSTEM - ASSEMBLY GUIDE
PURESTREAM SYSTEM - ASSEMBLY GUIDE INSTRUCTION VIDEO LINK: www.cagpurification.com/installment--procedure--videos.aspx OR SCAN CODE BELOW pipes fittings for compressed air NECESSARY TOOLS FOR INSTALLATION
Type 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
14 (0.55 in) MU-2 Brake Caliper. Caliper with Tension Spring Part No Weight (caliper only) kg (1.65 lb)
MU (Mk ) Series Disc Brake Caliper DB00 9 M0 Mounting Bolt Grade Tighten to Nm (.9 lbf-ft) Bolt not supplied with Caliper. A A 0 (. in) (.99 in) Crs Crs (.0 in) (0. in) ø0 (. in) Section on A-A MU- Brake
Specification Drainage Products Catalog and Price List
Drainage Specification Drainage Products Catalog and Price List Effective April 2, 2012 watts.com Drainage Products Standards C IAPMO U P C American National Standards Institute (ANSI) American Society
Weldlok Drainage Products
Weldlok Drainage Products Heading Images and drawings in this brochure are to be taken as a guide only. Our commitment to continual product development requires occasional changes to specification, detail
For installation into ductwork
X X testregistrierung Non-return dampers Type For installation into ductwork Non-return dampers prevent unwanted airflows against the intended airflow direction when the system is not in operation Maximum
Essentially, the Ralla 25 has eleven main structural elements:
156 157 158 Ralla 25 is a turntable platform ideal for those spaces where maneuvering the vehicle would prove extremely complex. Easy to use, Ralla 25 also comes in a version that can be tiled to match
13-17 Endurance Avenue Queanbeyan NSW 2620 Ph: Fax:
13-17 Endurance Avenue Queanbeyan NSW 2620 Ph: 02 6299 3422 Fax: 02 6299 3423 Situated in Queanbeyan, NSW, and a leading supplier to the ACT and local region, Capital Precast and Drainagestocks the complete
Safety Edge HSC HSC T. Technical data. Intended use. Function
HSC 65-35-01 T 12 Intended use 35 39 ±2 65 +4 All dimensions in mm Safety Edges are used for protecting against risks at Enclosure sealing: shearing and crushing edges, for instance at machine guards,