ACO Drain. For more information on ACO Drain visit ACO KerbDrain 280 Splay

Transcription

1 Uniclass L223 + L735 EPIC J343 ACO Drain ACO KerbDrain Splay CI/SfB (52.5) ACO KerbDrain Splay Kompact combined drainage and kerb system

2 ACO KerbDrain Splay Product Overview Introduction to ACO KerbDrain Splay Throughout the world, the ACO brand is recognised as a leading supplier in the design, development and manufacture of surface water drainage solutions. An extensive product portfolio offers the market quality solutions for every application, from light domestic to heavy duty use. The ACO Group has been manufacturing and selling market leading drainage products for over 40 years. During this time the Group has grown to a turnover of well over 400m, with trading companies in 28 countries on four continents. ACO KerbDrain has been developed from this wealth of expertise. An award winning combined kerb and drainage system specifically designed for carriageways, roundabouts, local road schemes, car parking and many other highway applications. In 200 ACO KerbDrain was awarded the Queen s Award for Enterprise: Innovation. Manufactured from polymer concrete, the ACO KerbDrain system is tough and robust with excellent chemical resistance. Proven site performance is backed up by the ACO KerbDrain system being fully independently tested, CE marked and certified to BS EN 433:2002 Load Class D 400. The system is also compliant with the Specification for Highway Works Clause 56 which mandates Load Class D 400 for combined kerb and drainage systems (Load Class C 250 only applies where the products are protected from direct traffic loads e.g. located behind safety barriers). The ACO KerbDrain family which includes mm, 305mm and 480mm deep systems has now been extended with the introduction of a new mm deep 45º Splay compact highway system. This new range called ACO KerbDrain Splay, is designed for use on rural highway applications and road schemes where it s more compact dimensions make it an extremely cost effective drainage solution. The product has a 45º splayed front profile to match standard OPC kerb stones manufactured to BS EN 340:2003. ACO KerbDrain Splay benefits from a wide range of complementary accessories consisting of drop kerbs, centre stones, access units and gullies. This enables ACO KerbDrain Splay to be used as a stand alone system or by the use of transition units (listed on page 5) can be integrated directly into ACO KerbDrain 305 drainage schemes, allowing continuous water flow between the two ranges. The one piece construction of the system and the lightweight properties of polymer concrete ensure the ACO KerbDrain Splay system is quick and easy to install. Whether you are installing products manually or mechanically to meet the HSE guidelines for kerb laying, the ACO KerbDrain Splay system provides a solution with the main units supplied in either mm or 000mm lengths. 2 ENVIRONMENTAL CONSIDERATIONS All materials used in the manufacture and packaging of this system are 00% recyclable. In using the latest finite element analysis design packages, ACO have ensured minimum materials have been used for maximum performance. By minimising the amount of material used in the manufacture of this system, the environmental impact is kept to a minimum. Not only has the product been developed with the environment in mind, the whole packaging and distribution of the product has been optimised to help meet your sustainable construction targets. The lightweight design not only aids installation but reduces carbon emission linked with the transportation of this product. ACO KerbDrain Splay 000 and mm units

3 Applications Rural highways Pedestrian and vehicular crossings Changing highway conditions ACO KerbDrain Splay is ideal for general carriageway drainage, where traditionally kerbstones and road gullies would be used. By combining the drainage function with the kerbstone, ACO KerbDrain Splay not only provides an efficient cost effective drainage solution, but has the added benefit of removing ironwork from the carriageway which can be a common point of failure in heavily trafficked areas and a safety risk to cyclists. Being a linear drainage product ACO KerbDrain Splay is also ideal for removing surface water run off in problem areas such as camber changes or cross fall transition points, reducing hazards associated with ponding and streaming. Where a continuous drainage system is required across pedestrian crossings and vehicle access points, a range of drop kerbs and centre stones are available. If a half battered kerb profile is required at pedestrian crossings the ACO KerbDrain Splay system can be linked via transition units to the full ACO KerbDrain 305 range of accessories. For details of the ACO KerbDrain 305 range please refer to the ACO KerbDrain brochure. For highway applications where the kerb profile needs to change from 45º splay to half battered and back again, such as alongside footpaths or at the approaches to urban areas, continuous drainage systems can be created by combining ACO KerbDrain Splay with the half battered profile of ACO KerbDrain 305 by the simple use of transition units. 3 SYSTEM BENEFITS Compact design reduces installation costs Minimal impact on buried services 45 splay profile matches kerbs to BS EN 340:2003 Tough impact resistant design One piece construction means no separate parts to bed and level Simple and easy to install Suitable for manual or mechanical installation Installation rates of up to 200m per day Integrates with ACO KerbDrain 305 drainage schemes High chemical resistance to salts, hydrocarbons, antifreeze and a wide range of other road pollutants Removes ironwork from the carriageway reducing potential failure points and hazards to motorists Fully compliant with the Specification for Highways Works Clause 56 Independently CE marked and certified to BS EN 433:2002 Load Class D 400

4 ACO KerbDrain Splay Product Overview System Overview Kerb units available in 000mm and mm lengths Compliant with Specification for Highway Works Clause 56 - mandating Load Class D 400 minimum for exposed kerbs Two drainage inlets per mm unit for efficient surface water removal DF hole for draining porous asphalt or providing temporary drainage of subsurface during installation 45 Splay front profile matches BS EN 340:2003 Drainage inlets designed to resist debris blockage Sealant groove for simple watertight installations Only mm deep for minimal impact on buried services Strong and lightweight polymer concrete design 4 Grooved external faces anchor channel securely into concrete surround ACO KerbDrain Splay is fully certified and CE marked to BS EN 433:2002 Load Class D 400 ACCESSORIES AND OPTIONS Access units Transition units Drop kerbs Centre stones 000mm unit End caps

5 Technical data ACO KerbDrain Splay - Kerb unit 7930 KDSP 000mm LG Length Invert KDSP mm LG mm 000mm 80mm 05mm mm mm 80mm mm mm mm ACO KerbDrain Splay 000mm kerb unit ACO KerbDrain Splay mm kerb unit ACO KerbDrain Splay - Access unit 7937 KDSPA Length 50/90 Invert mm mm 90mm ACO KerbDrain Splay access unit Ø0mm ACO KerbDrain Splay - Drop kerb units 7938 KDSPLH Length Invert KDSPRH mm 000mm ACO KerbDrain Splay RH drop kerb unit mm ACO KerbDrain Splay - Transition units 7940 KDSPRHT Length 50 /305 Invert / KDSPLHT / / mm mm 305mm 00mm ACO KerbDrain Splay LH transition unit mm

6 ACO KerbDrain Splay Product Overview ACO KerbDrain - Centre stone unit 25mm upstand 7965 KD305CS Length Invert Standard ACO KerbDrain 305 components for use with ACO KerbDrain Splay system. 80mm 50mm Sealing groove 0 x 5mm deep 25mm FRL (Reference) 95mm ACO KerbDrain Splay centre stone unit 205mm ACO KerbDrain Perforated centre stone 4982 KD305CSP Length Invert Standard ACO KerbDrain 305 components for use with ACO KerbDrain Splay system. 50mm Ø40mm 95mm Ø00mm 205mm 25mm FRL (Reference) 80mm ACO KerbDrain Splay - Inlet / Outlet endcap ACO KerbDrain Splay perforated centre stone unit KDSP309 (LH) Length Invert KDSP308 (RH) mm 50mm ACO KerbDrain - endcaps 496 KDSP306 (closing) Length Invert mm 50mm 480mm mm 260mm 0mm ACO KerbDrain Splay - RH inlet / outlet endcap

7 Hydraulics summary The ACO KerbDrain Splay hydraulic capacities are given below, tabulated for various channel lengths and longitudinal slopes. Values for other lengths and slopes may be interpolated. The columns for maximum catchment area (A m²) are based on a design rainfall intensity of 50mm/h. ACO KerbDrain Splay drop kerbs and centre stones will restrict the flow, so an outfall before a drop kerb may sometimes be required. Installation details ACO KerbDrain Splay has been specifically developed to be simple and cost effective to install. A typical installation detail is shown below. The customer should ensure that the minimum dimensions shown are suitable for the existing ground conditions. Engineering advice may be required. KerbDrain Splay Length to outlet (m) CE Conformity The ACO KerbDrain Splay system is fully certified and CE marked to BS EN 433:2002. Test certificates and a declaration of conformity are available on request. Please contact the ACO Drain Design Services Team on for further information. NBS Specifications ACO KerbDrain should be specified in section Q0;90. Assistance in completing this clause can be found in the ACO Drain entry in NBS Plus, or please contact the ACO Drain Design Services Team. Slope (%) 0.0% 0.5%.0%.5% Q(l/s) q(l/s/m) A(m 2 ) Q(l/s) q (l/s/m) A(m 2 ) Q(l/s) q (l/s/m) A(m 2 ) Q(l/s) q (l/s/m) A(m 2 ) KerbDrain Centre stone Length to outlet (m) Slope (%) % 0.5%.0%.5% Q(l/s) q(l/s/m) A(m 2 ) Q(l/s) q(l/s/m) A(m 2 ) Q(l/s) q(l/s/m) A(m 2 ) Q(l/s) q(l/s/m) A(m 2 ) Y 3 Y 2 50mm minimum 50mm minimum Asphalt with grass verge Top of concrete haunch:- Y 2 = 35mm maximum Y 3 = 60mm maximum Specification clause 00mm Max Wearing Course 50mm minimum Concrete bed and haunch minimum compressive strength 25 N/mm 2 Base Course Road Base Sub Base The surface drainage system shall be ACO KerbDrain Splay system as supplied by ACO Technologies plc; all materials and components within the scope of this system shall be obtained from this manufacturer. The system shall be CE marked and fully compliant with BS EN 433:2002, certificated to Load Class D 400 and shall comply with the Manual of Contract Documents for Highway Works: Specification of Highway Works; Clause 56. A declaration of conformity shall be supplied to the Supervising Officer upon request. The ACO KerbDrain Splay shall be of 00mm internal width, 50mm external width and traffic face to match 45º splayed type SP kerbs. All units shall be one piece manufacture in polyester resin concrete with twin inlets per mm unit, four inlets per 000mm unit providing a minimum inlet area of 2,400mm² per metre. The standard units shall be installed with the manufacturer s drop kerbs, centre stone units, gullies, rodding/access units, mitre units for curves (ACO KerbDrain 305 system only) and accessories as required for the scheme. The system shall be installed in accordance with the manufacturer s printed recommendations, and the work carried out as specified on the Supervising Officer s drawing no. (*) and in accordance with recognized good practice. Standards of workmanship shall generally be as specified in BS EN 752 and BS 8000:Part 4:989. * Please insert drawing number relevant to the project. Y 2 Y 3 7

8 ACO Technologies plc ACO Drain ACO Build ACO Building Drainage ACO Technic ACO Sport ACO Wildlife ACO Drain A division of ACO Technologies plc ACO Business Park, Hitchin Road, Shefford, Bedfordshire SG7 5TE Tel: Fax: Sales: customersupport@aco.co.uk Technical: draintechnical@aco.co.uk website: The ACO Group: A strong family you can depend on. April 2009 ACO Technologies plc. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the actual conditions of use are suitable. This brochure and any advice is provided by ACO Technologies plc (the Company) free of charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of continuous product development and improvement renders specifications liable to modification. Information provided in this brochure is therefore subject to change without prior notification. Printed on material approved by the Forest Stewardship Council (FSC) who provide a means of assuring that products come from sustainably managed forests. PC20575