Price List. Calibration Fee
|
|
- Sarah Hicks
- 5 years ago
- Views:
Transcription
1 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : Dimensional Metrology 1 Iodine Stabilized He-Ne laser Stabilized He-Ne laser Calibration Fee 633 nm 5.0 x ,000/piece Beat measurement mehod with Iodine nm 1.0 x 10-9,530/piece stabilized He-Ne laser Laser Interferometer (Laser Head) Laser Wavelength meter nm and 1560 nm 1.0 x ,000 Beat measurement mehod with optical comb nm 0.1 x 10-6,530/piece Beat measurement mehod with Iodine stabilized He-Ne laser nm 1.0 x ,80/piece Diect measurment method by wavelength meter nm 1.0 x ,600/piece Rectangular Gauge Block, Material : Steel, Ceramic, Tungsten Carbide, Chromium Carbide nm 1.0 x ,600/piece < 15 mm Grade K or 00 1,500/piece Optical Interferometry method, Deviation from central length lapping. Both side wringing < 0.5 mm,560/piece Rectangular Gauge Block, 0.1 mm to 15 mm Grade K or 00 1,730/piece Material : Steel, Ceramic, Tungsten Carbide, Chromium Carbide. Optical Interferometry method, Variation in length measurement. lapping. 8 Rectangular Gauge Block, according to 0.5 mm to 100 mm Grade K or 00 1,500/piece Optical Interferometry method, Euramet cg-/v.0 (03/011) Deviation from central length lapping. Both side wringing 9 Rectangular Gauge Block, 0.5 mm to 100 mm Grade 0 750/piece Comparison method, Dlc, Deviation Material : Steel, Ceramic, Carbide from central length, Variation (fo, fu) 15 mm 0, 1, 3,030/piece lapping Gauge Block Accessory up to 100 As Specification 5,530/piece Flatness and parallel measurement Effective Date : 14 October 016 Page 1 / 10
2 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : Rectangular Gauge Block (inch), Material : Steel, Ceramic, Carbide. Long Gauge Block (Metric Rectangular, Square) Length Bar inch to 4 inch Grade 0 750/piece Comparison method, Dlc, Deviation from central length, Variation (fo, fu) lapping 15 mm to 500 mm Grade 0, 1, 3,380/piece Comparison Method, Dlc, Deviation from central length, Variation (fo, fu) 600 mm to 1000 mm Grade 0,1, 6,750/piece lapping mm to 600 mm Grade 1 3,380/piece Comparison Method, Dlc, Deviation from central length, Variation (fo, fu) Grade 3,380/piece Measuring faces inspection Long Gauge Block 15 mm to 500 mm Grade K or 00 8,100/piece Optical Interferometry method, Deviation from central length Material : Steel 600 mm to 1000 mm Grade K or 00 1,000/piece Measuring faces inspection and lapping. Both side wringing Thermal expansion coefficient of long to 1000 mm Grade K or 00 18,000 gauge block Laser interferometer Square Gauge Block Up to 100 mm 16 Grade K 1,730/piece Material : Steel Optical Interferometry method, Autocollimator (Analog, Digital) 1000" 0." 15,030/piece 1000" 0.11" 18 Rotary Encoder degree 0.05" 18,000/piece 4,000/piece Calibration by standard autocollimator Calibration by self calibration rotray encoder system Calibration by self calibration rotray encoder system Polygon 8 faces 9,000/piece faces 11,50/piece Calibration by one autocollimator faces 0." 18,000/piece faces 45,000/piece faces 6,750/piece faces 8,440/piece Calibration by two autocollimator faces 0.34" 13,500/piece faces 31,530/piece to 7 faces 18,000/piece Calibration by self calibration rotray " encoder system Effective Date : 14 October 016 Page / 10
3 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : 0 Angle Gauge Block 1,875/piece Cal. by autocollimator and indexing " to 0.55" table 0.6" 1,50/piece Cal. by CMM up to 90 o ",500/piece Calibration by self calibration rotray encoder system o to 360 o 0." 9,000/piece Cal. by polygon 8 and 1 faces ,000/piece Calibration by self calibration rotray 0.16" encoder system 0 o to 360 o Cal. By Profile projector 1' 4,500/piece o to 360 o 1' 4,500/piece Overlay Chart 0 o to 360 o 1' 3,380/piece Electronic Inclinometer / ±1000" or 4,85 mm/m 0.3" or 1.7 m/m 7,030/piece Calibration by autocollimator Electronic Level -50 o to 50 o ' 4,10/piece Calibration by rotary encorder Precision Level Full range 5 m/m 5,630/piece Calibration by autocollimator Cylindrical Square Up to 600 mm m+ 6.0x10-6 l 6,530/piece Indexing Table Concise Semi-Circle Gauge Template Standard Square Square Master Precision Square Bevel Protector Comparison method with Standard Up to 600 mm 0.4 m+.4x10-6 l 4,500/piece square Up to 600 mm 1 m+ 7.x10-6 l 4,10/piece Up to 600 mm 1 m+ 7.x10-6 l 3,360/piece Calibration by CMM to 360 1' 3,380/piece Calibration by angle gauge block Combination Set 0 to " 4,110/piece Calibration by angle gauge block Straight Parallel faces 3,380/piece Calibration straighness measuring faces 0.6 m + 6.0x10-6 l 6,750/piece machine Small Angle Generator Up to 1000 mm 0.6 m + 6.0x10-6 l 5,400/piece Calibration by autocollimator Sine Bar 4,500/piece include angle deviation and flatness up to 500 mm 1" 6,750/piece angle deviation, flatness of measuring face, straightness of rollers, difference of rollers dia., center distance of rollers, parallelism of rollers, parallelism of measuring face and rollers Effective Date : 14 October 016 Page 3 / 10
4 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : 36 Straightness Bar up to 1000 mm 1.4 m 5,000/meter Calibration straighness measuring machine Straightness Measuring Machine up to 7,500 mm 1.5x10-3 l 5,000/meter Cal. by standard autocollimator Straightness Measuring Machine and Up to 1000 mm 0.5 m 10,000 Cal. by Reversal Method Straightness Bar 39 Plain Ring Gauge 40 Plain Ring Gauge 0.1 to 300 mm,410/piece Roundness measurement d μm,700/piece 0.5 mm to 100 mm d μm 4,410/piece Measurement by using Setting Ring Gauge and Universal Length Measurement Machine to 300 mm (0.5) (1.8 d) μm 4,410/piece Measurement by using Setting Ring Gauge and Universal Length Measurement Machine Go - No Go Plain Ring Gauge 0.1 to 300 mm,410/side Roundness measurement d μm,700/piece 4 Taper Plain Ring Gauge 1 to 300 mm.0 m,410/piece Cal. by Universal length measuring Machine 43 Go - No Go Taper Plain Ring Gauge 1 to 300 mm.0 m,410/side Cal. by Universal length measuring Machine 44 Plain Plug Gauge 0.1 to 1 mm 0.36 m,410/piece Roundness measurement to 100 mm 0.30 m+1.43x10-6 d,410/piece,700/piece to 300 mm 0.90 m+1.81x10-6 d,410/piece Go-No Go Plain Plug Gauge 0.1 to 1 mm 0.36 m Roundness measurement to 100 mm 0.3 m+1.43x10-6 d,410/side,700/piece to 300 mm 0.90 m+1.81x10-6 d Pin Gauge 0.1 to 1 mm 0.36 m,410/piece Roundness measurement to 100 mm 0.3 m+1.43x10-6 d,410/piece,700/piece to 300 mm 0.90 m+1.81x10-6 d,410/piece Master Ball dia. Up to 300 mm 0.90 m+1.81x10-6 d,410/piece Roundness measurement ,350/piece 48 3-Wire Set All sizes 0.3 m+1.43x10-6 d,80/set Plain Snap Gauge Go - No Go Plain Snap Gauge Thread Snap Gauge Go - No Go Thread Snap Gauge All ranges 0.5 m,410/piece All ranges 0.5 m,410/side Cal. by Universal length measuring Machine All ranges 1.5 m,80/piece All ranges 1.5 m,80/side Effective Date : 14 October 016 Page 4 / 10
5 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : 53 Flat Internal Limit Gauge All ranges 0.5 m,410/piece Taper Plain Plug Gauge Go - No Go Taper Plain Plug Gauge Parallel Thread Ring Gauge 1 to 300 mm.0 m,80/piece to 300 mm.0 m,80/side Cal. by Universal length measuring Machine from pitch mm 1.5 m,80/piece Go - No Go Parallel Thread Ring Gague from pitch mm 1.5 m,80/side Taper Thread Ring Gauge from pitch mm m,80/piece Go - No Go Taper Thread Ring Gauge Parallel Thread Plug Gauge Go - No Go Parallel Thread Gauge from pitch mm m,80/side from pitch mm 1.5 m,80/piece Cal. by Universal length measuring from pitch mm 1.5 m,80/side Machine Taper Thread Plug Gauge from pitch mm m,80/piece Go - No Go Taper Thread Plug Gauge from pitch mm m,80/side Height Master (analog/digital) 0 to 300 mm 13,500/piece Cal. by Gauge block or Length Bar to 600 mm 0.3 m + 3x10-6 l,500/piece Check Master/ Step Gauge 0 to 300 mm 10,660/piece to 600 mm 13,160/piece m Cal. By Laser Interferometer 0 to 1000 mm 15,660/piece Gear standard Spur gear : 5 to 400 mm 1.0 to 3.0 m 7,880/piece Profile slope deviation 67 Gear standard Spur gear : up to 45 o 1.0 to.0 m 7,880/piece Helix slope deviation Cal. by Coordinate Measuring Spur gear : Pitch 7,880/piece up to 400 mm.0 m Machine Bevel Gear : form deviation up to 300 mm.0 m 7,880/piece Ball Plate up to 1000 mm m 36,000/piece Depth Micro-Checker 0 to 150 mm 9,000/piece Cal. by Laser Interferometer to 300 mm 0.3 m +.7x10-6 l 11,50/piece Effective Date : 14 October 016 Page 5 / 10
6 7 73 National Institute of Metrology (Thailand) 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : Inside Micro-Checker 0 to 300 mm 9,000/piece Cal. by Laser Interferometer m 0 to 600 mm 11,910/piece Caliper Checker/ Vernier Checker 0 to 300 mm 9,000/piece Cal. by Laser Interferometer m 0 to 600 mm 11,910/piece Optical Parallel max. dia. 60 mm 0.0 m (F) 1,600/piece F being Flatness m+6.48x10-6 l m P being Parallelism 0.3 m+6.48x10-6 l m T being Thickness 75 Optical Flat max. dia. 60 mm 0.0 m,030/piece Cal. by Flatness Interferometer max. dia. 300 mm 0.05 m,530/piece Glass Hemisphere dia. Up to 355 mm 8+ 8R nm 8,100/piece Magnification Setting Standard dia. Up to 355 mm R nm 8,100/piece Cylindricity of cylinder Height up to 500 mm 0.09 m x 10-4 H 6,80 Direct measurement with roundness measuring machine Roughness Standard (Type A), Step Height 5 nm to 3 m 7+1Z m nm 5,030/step Z m being the measured value by contract measurement 10 nm to 10 m.4+5.4z m nm 6,80/step Z m being the measured value by noncontract measurement Roughness Standard (Type C or U(R a )= Z m nm nm to 3 m 7,530/range Z m being the measured value Type D), Roughness Specimen U(R z )= Z m nm Rsm up to 0 mm 1 m 81 Flatness Tester 00,000/ea Roundness of steel ball dia. Up to 355 mm R nm 4,350/piece Step height / depth standard 1 nm to 100 nm 0.43 nm 7,530/piece Measurement by Metrological Pitch standard Nanomeasuring and Nanopositioning 0.1 m to 100 m 3.70 nm 7,530/piece Machine Radius of spherical lens and ball up to 50 mm,530 Cal. by Flatness interferometer R m 86 Riser Block 0 to 150 mm to 300 mm 0.3 m + 3x10-6 l 5,660/piece Height and Parallelism to 600 mm Vernier Caliper 0 mm to 1000 mm 3,380/piece Cal. by Gauge Block or Length Bar mm to 1500 mm 0.01 mm x 10-6 l 4,500/piece mm to 000 mm 6,750/piece Height Measuring Station 0 mm to 300 mm 11,50/piece Cal. by Gauge Block or Length Bar m x10-6 l 0 mm to 600 mm 1,600/piece Effective Date : 14 October 016 Page 6 / 10
7 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : 89 Height Gauge 0 mm to 1000 mm 6 m x10-6 l 9,000/piece Cal. by Gauge Block or Length Bar Effective Date : 14 October 016 Page 7 / 10
8 90 National Institute of Metrology (Thailand) 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : External Micrometer 300 mm to 500 mm,80/piece Cal. by Gauge Block > 500 mm to 1000 mm 1 m x10-6 l 3,380/piece > 1000 mm to 000 mm 4,500/piece mm to 5 mm 0.08 m + 3.0x10-6 l 3,380/piece - Resolution : 0.1 m Setting Zero Rod Up to 1000 mm 0. m +.3x10-6 l,030/piece Cal. by Gauge Block Micrometer Head 0 mm to 5 mm 3,380/piece Cal. by Universal Length Measuring m +.3x10-6 l Machine or standard linear gauge 0 mm to 50 mm 4,500/piece Calibration Tester 0 mm to 1 mm 7,880/piece m +.3x10-6 l 0 mm to 5 mm 7,880/piece Cal. by Standard linear gauge 0 mm to 50 mm 9,000/piece m +.3x10-6 l 0 mm to 100 mm 11,50/piece Dial Gauge Tester - Scale - Digital 0.6 m +.3x10-6 l 6,750/piece mm to 5 mm 0.3 m +.3x10-6 l Cal. by Standard linear gauge 0 mm to 50 mm 0.3 m +.3x10-6 l 8,780/piece Torsional Recovery Electronic Comparator (Mu-Checker / Millitron) (Include: Probe and display unit) Analog M-Checker 0 mm to 100 mm 0.3 m +.3x10-6 l 10,030/piece mm to 40 mm 0.01 m x10-6 l,80/piece Cal. by Profile projector m 4,500/piece m 0.06 m x10-6 l 4,500/piece m 4,500/piece Request stand and Jig fixture m 0.06 m x10-6 l 4,500/piece m 4,500/piece m 0.06 m x10-6 l. 4,500/piece Calibration Gauge for Seam Metal 0 to 10 mm 0.3 m x 10-6 l,530/piece Cal. by QV Laser Hologage 0 to 10 mm 11,50/piece Cal. by Gauge Block m +.3x10-6 l 0 to 50 mm 15,750/piece Radius Gauge All sizes Cal. by QV m x ,910/First(450/Next R piece) 100 Pitch Gauge All sizes 1 m,50/piece Cal. by QV Effective Date : 14 October 016 Page 8 / 10
9 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : Feeler Gauge All sizes 0.8 m 1,910/piece Cal. by ULM/standard linear gauge Standard Foil 103 Laser Scan Micrometer (Display Unit, Measuring Unit) 104 Holtest / 3- point internal micrometer up to 100 m over 100 mm Up to 100 mm Up to 100 mm 0.05 m x10-3 l 0.34mm x10-3 l 0.5 m 1.5 m x10-6 d,50/first(450/next Cal. by ULM/standard linear gauge piece) ,50/piece Cal. by Standard plug gauge ,50/piece Cal. by Ring gauge LSM Calibration Tool Up to 5 mm 50.0 m +.5x10-6 l,50/piece Arm Calibrator All ranges 0.01 mm l,80/piece Cal. by CMM Surfacetest Step Gauge All ranges 0.05 m +.3x10-6 l 1,130/piece Cal. by CMM/standard linear gauge Magnification Checker Orefice Plate Calibration block Full scale 0.7 m +.3x10-6 l 5,630/piece Cal. by standard linear gauge Up to 1000 mm 0.0 m +.3x10-6 l 5,00/piece Cal. by Profile projector V mm 4,500/piece V 0.01 mm 3,380/piece Cal. by QV LSW 0.01 mm 3,380/piece Objective Micrometer 0-1 mm 0.5 m +.3x10-6l,80/piece Cal. by Lasr interferometer/qv Dial gauge tester Assembly and inspection 0-50 mm +- um 10, Standard Glass Scale 0 mm to 100 mm ,380/piece Cal. By Laser interferometer 0.5 m x10-6 l 0 mm to 300 mm 4,500/piece mm to 300 mm ,750/piece (41) (100.0 ) nm 0 mm to 500 mm 18,000/piece Cal. by Line Scale Interferometer mm to 1000 mm 3 (100 ) ( ) nm,500/piece Standard Metal Scale 0 mm to 1000 mm 8 m +.3x10-6 l 4,500/piece Cal. by QV/Laser interferometer Effective Date : 14 October 016 Page 9 / 10
10 3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel (Please contact : Customer Service Section Ext. 3101, 310) Fax cs@nimt.or.th Website : Working Standard Scale 116 Reading Scale 117 Calibration Grid 0 mm to 00 mm 0.7 m +.3x10-6 l 3,380/piece mm to 500 mm 1.0 m +.3x10-6 l 5,630/piece Cal. by Line Scale Interferometer/ mm to 600 mm 1.0 m +.3x10-6 l 6,750/piece Laser interferomter mm to 1000 mm 1.0 m +.3x10-6 l 7,880/piece mm to 300 mm 3,380/piece Cal. by laser interferometer m x10-6 l 0 mm to 600 mm 5070/piece Cal. by QV mm.0 m +.3x10-6 l 4,500/piece Cal. by QV or Laser Interferomter mm.0 m +.3x10-6 l 5,400/piece mm.0 m +.3x10-6 l 6,300/piece Cal. by QV > 300 mm.0 m +.3x10-6 l 10,800/piece Reticle of Scale Lupe 0 to 0 mm mm x10-6 l,50 First (1800/Next Cal. by QV function) 119 Up to 1000 mm 0.01 mm +.3x10-6 Cal. by laser interferometer/standard Digimatic Scale Unit l 4,500/piece glass scale 10 Cal. by laser interferometer/standard Linear Scale Up to 1000 mm 7 m 5,630/piece glass scale 11 Measuring Microscope Up to 1000 mm 10 m 6,750/piece Cal. by laser interferometer/standard glass scale On-site Calibration 11 Gauge Block Comparator Up to 100 mm 0.03 m 0,030/piece Euramet cg-/v.0 (03/011) Gauge Blocks 0.5 to 100 mm 1 Universal Length Measuring Machine Up to 1000 mm 0.05 m + 1. x 10-6 l 0,50/piece Comparison with gauge block (ULM) Up to 1000 mm 0.05 m + 1. x 10-6 l 9,800/piece Comparison with Laser Interferometer Profile projector Measure in linear scale, magnification 0 to 150 mm 1,530/piece of lens, square and 7 points in angle (5 o, 15 o, 30 o, 45 o,60 o, 75 o, 90 o ) Linear Scale 0 mm to 1000 mm 5,630/piece Cal. by laser interferometer/standard m +.3x10-6 l glass scale 0 mm to 000 mm 6,750/piece Effective Date : 14 October 016 Page 10 / 10
Caliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0751 Valid Until Last Amended on
Last Amended on 10.03.2016 Page 1 of 5 I. DIMENSION 1. Vernier caliper $ 0 to 300 mm/0.01 mm ± 12.0 µm Using Caliper Checker 0 to 300 mm/0.02 mm ± 16.1 µm Using Caliper Checker 0 to 600 mm/0.01 mm ± 14.0
More informationMetrology Laboratory, CMTI, Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka Accreditation Standard ISO/IEC 17025: 2005
aboratory Metrology aboratory, CMTI, Central Manufacturing Technology ast Amended on 22.09.2016 Page 1 of 15 I. DIMENSION (Basic Measuring, Gauge etc.,) 1. ANGE GAUGE BOCKS $ 0 to 90 2.8 arc sec Using
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More informationCentral Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Durgapur, West Bengal
Last Amended on 23.09.2014 Page 1 of 9 I. DIMENSION 1. GAUGE BLOCKS $ 0.5 mm to 25 mm 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 2. LENGTH BAR $ Upto 300 mm 300 mm to 600 mm 300 mm to 1000 mm 0.11µm
More informationQ-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Division of Cromwell Tools Ltd Services Block 65 Chartwell Drive Wigston Leicester LE18 2FS Contact: Mr T still Tel: +44 (0)116-2572396
More informationCALIBRATION SYSTEM CERTIFICATE
CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service Issue No: 028 Issue date: 10 pril 2018 ccredited to 6 Banner Park Wickmans Drive Coventry CV4 9X Contact: Keith rnold Tel: +44 (0)2476 426 316/317
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0393 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. Vernier Caliper (Digital/ Dial/ Scale) $ L.C.: 0.01 mm 0 to 150 mm 7.7 µm Using Caliper Checker 0 to 200 mm 8.1 µm 0 to 300 mm 9.3 µm 0 to 600 mm 13.9 µm 2.
More informationQA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)
More informationAccurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More informationPage : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IE 17025:2005 Unit 3 24-26 Boulton Road Stevenage Hertfordshire SG1 4QX ontact: Mr G J Wilson Tel: +44 (0) 1438 900080 Fax: +44 (0) 1438
More informationRev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
More informationA.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
More informationICL Calibration And Testing Services, SCO - 37, Ground Floor, Sector-12, Panchkula, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 09.12.2016 Page 1 of 8 I. DIMENSION (Basic Measuring, Gauge etc.) 1 LENGTH GAUGE/SETTING ROD $ Up to 100 mm >100 mm to 500 mm 1.5 µm 7.20 µm Using ULM, Gauge Block grade- 0 & Electronic
More informationAutocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationCalitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020
More informationHi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges
More informationTEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
More informationTRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationGear Measurement. Lecture (7) Mechanical Measurements
18 3. Gear profile checking 2. Involute measuring machine In this method the gear is held on a mandrel and circular disc of same diameter as the base circle of gear for the measurement is fixed on the
More informationSchedule. 300 mm to 600 mm 600 mm to 1000 mm inch to 12 inch
LABORATORY LOCATION: (PERMANENT LABORATORY) MITUTOYO (M) SDN. BHD. MAH SING INTEGRATED INDUSTRIAL PARK BANDAR PINGGIRAN SUBANG 4, JALAN UTARID U5/14, SECTION U5 40150 SHAH ALAM SELANGOR, MALAYSIA Page:
More informationDepartment of Mechanical Engineering ME6513 - METROLOGY AND MEASUREMENT LAB LABORATORY MANUAL Name Register No. Branch Year & Semester : : : : 1 CONTENTS S.NO. DATE EXPERIMENT NAME PAGE NO. 1 Calibration
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Chamber Commerce: 06073326 Location(s) where activities are performed under accreditation ad Office Smaragdstraat 7 7554 TD ngelo OV The Netherlands Location Abbreviation/ location Smaragdstraat 7 7554
More informationUNDERSTANDING CMM SPECIFICATIONS AND CALIBRATION METHODS
UNDERSTANDING CMM SPECIFICATIONS AND CALIBRATION METHODS EDUCATION A TECHNICAL PRESENTATION FROM THE LEADING MANUFACTURER OF METROLOGY INSTRUMENTS Bulletin No. 2183 EDU-14003A-H Mitutoyo Institute of Metrology
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0208 Valid Until Last Amended on
Last Amended on 12.08.2016 Page 1 of 7 I. DIMENSION (Basic Measuring, Gauge etc.) 1. CALIPER $ (Vernier / Dial / Digital) L.C.: 10 µm ф L.C.: 50 µm ф Upto 600mm 13 m Using Gauge Block Set Grade 0 (Carbide);
More informationQuindos the Ultimate Software package for Gears, Gear Tools and other Special Applications
Quindos the Ultimate Software package for Gears, Gear Tools and other Special Applications Quindos gear packages Gearings Cylindrical Gear Unknown Gear Involute & Lead Master Straight Bevel Gear Spiral
More informationSCOPE OF ACCREDITATION TO ISO/IEC & KS Q ISO/IEC
SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 & KS Q ISO/IEC 17025-2006 Korea Instrument Co., Ltd. Branch 45, Gwangjang-ro 56beon-gil, Sasang-gu, Busan 46976 Phone : 051-322-0880, Fax : 051-322-4066, E-mail
More informationusing a low force 3D touch probe
Federal Department of Justice and Police FDJP Federal Office of Metrology METAS Ultra precision µcmm using a low force 3D touch probe F. Meli, A. Küng, R. Thalmann Federal Office of Metrology (METAS) Ultra
More information0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationANALYTICAL STUDY ON THE UNCERTAINTY OF LOAD CELLS CALIBRATED WITH DEADWEIGHT-FORCE-STANDARD MACHINE AND FORCE-COMPARATOR MACHINE
ANALYTICAL STUDY ON THE UNCERTAINTY OF LOAD CELLS CALIBRATED WITH DEADWEIGHT-FORCE-STANDARD MACHINE AND FORCE-COMPARATOR MACHINE Sumet Heamawatanachai 1,*, Kittipong Chaemthet 1, Noppadon Sumyong 1, and
More informationFall Savings! HUGE SAVINGS!
Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without
More informationCatalog # Meeting Your Metrology Needs. A.A. Jansson, Inc. Precision Measuring Service and Equipment
Catalog #10046 2017 Meeting Your Metrology Needs A.A. Jansson, Inc. Precision Measuring Service and Equipment Our Place in History C.E. Johansson, Father of Measurement, of Eskilstuna, Sweden, devoted
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More information+91-8048718949 Bearing & Tools Centre http://www.measuringtestinginstrument.com/ We are a renowned dealer and supplier of a wide assortment of precision engineered testing and measuring equipment. Our
More informationUltra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationTechnical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
More informationCheck Points. for Measuring Instruments
Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring
More informationVerifying the accuracy of involute gear measuring machines R.C. Frazer and J. Hu Design Unit, Stephenson Building, University ofnewcastle upon Tyne,
Verifying the accuracy of involute gear measuring machines R.C. Frazer and J. Hu Design Unit, Stephenson Building, University ofnewcastle upon Tyne, Abstract This paper describes the most common methods
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More information台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationIndex. BDC, see bottom dead center bottom dead center (BDC) 220, 223, , 238, Burner rig test 255
Index accuracy 6 7, 14, 31, 38, 42 43, 98, 100, 107, 127 128, 130, 153, 184 185, 199 200, 261, 270 271 AFM, see atomic force microscope algorithm techniques 194 195, 197 algorithms 67, 130, 149, 158, 163,
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationNew. Swiss Promo. Shop Proof Technology. TESA-HITE Magna 400 and TESA-Cal. Validity : All prices with VAT excluded
Validity : 31.07.2007 All prices with VAT excluded Swiss Promo TESA-HITE Magna 400 and 700 2 Shop-Proof Technology protected against water oil dust New Shop Proof Technology TESA-Cal IP67 6 1730 2190 108
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationYOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationCALIBRATION PRICE LIST
THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters
More information2 HEXAGON MANUFACTURING INTELLIGENCE HexagonMI.com
GLOBAL S DATA SHEET 2 HEXAGON MANUFACTURING INTELLIGENCE HexagonMI.com GLOBAL S The Coordinate Measuring Machine that Pushes Productivity Further The GLOBAL S coordinate measuring machine (CMM) series
More informationRotary Positioning Stages Introduction
Introduction Features Aluminum/steel construction Protective black anodize finish Low-friction rotary adjustment Precise/accurate movement Trouble-free operation aedal precision rotary stages are utilized
More informationService INFO Calibration. Tool repair service of thread gauges. Calibration
Service Tool repair service -2 Calibration of thread gauges -16 Regrinding service -5 Calibration of plain gauges -17 Coating service -8 Calibration of appliances -19 INFO ISO 90 ff test equipment monitoring
More informationOverview of Air Bearings and Design Configurations Richard Pultar OPTI521 December 14, 2016
Overview of Air Bearings and Design Configurations Richard Pultar OPTI521 December 14, 2016 Introduction Air bearings are a type of bearing that use pressurized air to create an air gap between two surfaces.
More informationKeysight Technologies 5530 Dynamic Calibrator. Data Sheet
Keysight Technologies 5530 Dynamic Calibrator Data Sheet Introduction 5530 Dynamic Calibrator Requirements Power Requirements Laser Head: 100 240 Vac, 50/60 Hz 50W (during warmup), 33W (after warmup) Calibrator
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More informationWelcome to Garber C O R P O R AT E O V E R V I E W
CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope
More informationScrew Driven automation tables
automation tables Precise multi-axis positioning systems play an integral part in today s semiconductor, computer peripheral, solar power, flat panel, life sciences, lab automation, biomedical and electronics
More informationISO Acceptance and re-verification tests for Coordinate Measuring Machines. a brief introduction
ISO 10360 Acceptance and re-verification tests for Coordinate Measuring Machines a brief introduction ISO 10360 Acceptance and re-verification Tests for Coordinate Measuring Machines (CMMs) Consisting
More informationCatalog No. E Check Points. for Measuring Instruments
Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding
More informationIEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
More informationLecture (7) on. Gear Measurement. By Dr. Emad M. Saad. Industrial Engineering Dept. Faculty of Engineering. Fayoum University.
1 Lecture (7) on Gear Measurement Fayoum University By Dr. Emad M. Saad Industrial Engineering Dept. Faculty of Engineering Fayoum University Faculty of Engineering Industrial Engineering Dept. 2015-2016
More informationCRYSTA-APEX (Standard Accuracy) Pages 602 to 607. STRATO-APEX (High Accuracy) Page 608. LEGEX (Ultra-high Accuracy) Page 610
Coordinate Measuring Machines CRYSTA-APEX (Standard Accuracy) Pages 602 to 607 STRATO-APEX (High Accuracy) Page 608 FALCIO-APEX (High Accuracy Large type) Pages 608, 609 LEGEX (Ultra-high Accuracy) Page
More informationCetemet, your ally for your innovative ideas
Cetemet, your ally for your innovative ideas METROLOGY Lab CLIMATE TESTS Lab WELDING AND MATERIALS Lab METROLOGY Services Metrology services 3D Digitizing for dimensional control and reverse engineering
More informationAkribis Systems. Where Precision Matters
Akribis Systems TM Where Precision Matters Akribis Logo TM Akribis is a Latinized Greek word that means Precision. On the logo, the letter a is formed by a line and a circle, representing linear and rotary
More informationX-LSM-E Series Datasheet
Simplifying Motion Control X-LSM-E Series Datasheet * 25, 50, 100, 150, 200 mm travel * 10 kg load capacity * Up to speed and up to 55 N thrust * Built-in controller; daisy-chains with other Zaber products
More informationReplace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
LINEAR SERVO ECONO-SLIDE Ultimate Solution for High Throughput Precision Positioning Replace your belt, ball screw or rack and pinion mechanism with a simple and economical linear servo motor actuator
More informationTESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS
CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper
More informationIntroduction. // Points of contact Standard pressure angel is pressure angle available on request
Introduction The use of specially adapted thread grinding machines gives our rack a highly accurate helicoidal tooth profile which provides two distinct advantages - very good pitch accuracy and sufficient
More informationISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
More informationTYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.
MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationFaculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students
Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity
More informationDIAL SNAP GAUGE. dial indicator is not included W. optional indicators
DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N
More informationSchedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C.
Page: 1 of 9 LABORATORY LOCATION: (PERMANENT LABORATORY) PPCALIBRATION SERVICES SDN. BHD. NO. 15, MEDAN BUKIT EMAS PUSAT PERNIAGAAN BUKIT EMAS 14000 BUKIT MERTAJAM, PULAU PINANG MALAYSIA This laboratory
More informationPrecision Positioning Table LH
CTLH32M Precision Positioning Table LH TSLH12M/J Table with bellows 12 -M Depth 1( 1 ) 1( 1 ) 32 29 29 18 19 -M8 Depth 16 13 (3.7) (7.3) L 1( 2 ) (2.3) E S/2 13 S/2 E (2.3) 1 1 12 TSLH M CTLH M 28 7 Hole
More informationBrake caliper machining: improve process control and reduce inspection costs
Case brief Brake caliper machining: improve process control and reduce inspection costs Reduce part costs Full traceability High accuracy automated shop floor gauging Overview Manufacturers of brake calipers
More informationTESATAST Standard Models
TESATAST Standard Models 0110005 0,01 0, 2 0 0,4 0 12,53 0110006 0,01 0, 3 0 0,4 0 12,53 0110007 0,01 0,5 2 0 0,25 0 36,53 011000 0,01 0,5 3 0 0,25 0 36,53 0110009 0,002 0,2 2 0 100 0 12,53 0110010 0,002
More informationSet your Mobile Phones to Silent Respect your colleagues no private conversations Be on time
Set your Mobile Phones to Silent Respect your colleagues no private conversations Be on time E. Francalanza 1 Thread Applications Thread Manufacturing Thread Design Thread Gaging Thread Measurement CMMs
More information4.080 Linear Stages Vacuum. Call Us Today (East) (West) LINEAR STAGES
4.080 Linear Stages Vacuum Call Us Today 8.832.3456 (East) 949.679.9191 (West) LINEAR STAGES 4.094 Precision Linear Stage PLS-85 Vacuum FACTS Load characteristics Fx (N) Fy (N) Fz (N) Mx (Nm) My (Nm) Mz
More information