Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
|
|
|
- Bennett Barrett
- 5 years ago
- Views:
Transcription
1 Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper Gages provide error-free CD readings as well as data output for SPC analysis. Internal measurement type SPECIFICTIONS / Order No. Resolution ccuracy Max. Depth "/ mm "/ 0.005mm.0008"/ 0.015mm Max. Depth.47"/ mm.027"/ 0.7mm Min. of Width Mass(g).023"/ 0.5mm Chisel R.0039"/ mm "/ "/ 5-15mm 0.005mm.0008"/ 1.37"/ 35mm.09"/ 2.3mm.032"/ 0.8mm all.024"/ 0.6mm mm dia "/ "/ 10-30mm 0.01mm.0015"/ 3.3"/ 85mm.19"/ 5.2mm.06"/ 1.2mm all.04"/ 1mm "/ "/ 20-40mm 0.01mm.0015"/ 3.3"/ 85mm.26"/ 7mm.06"/ 1.2mm all.04"/ 1mm "/ "/ 30-50mm 0.01mm.0015"/ 3.3"/ 85mm.26"/ 7mm.06"/ 1.2mm all.04"/ 1mm "/ "/ 40-60mm 0.01mm.0015"/ 3.3"/ 85mm.31"/ 8.3mm.06"/ 1.2mm all.04"/ 1mm "/ "/ 50-70mm 0.01mm.0015"/ 3.3"/ 85mm.31"/ 8.3mm.06"/ 1.2mm all.04"/ 1mm "/ "/ 60-80mm 0.01mm.0015"/ 3.3"/ 85mm.31"/ 8.3mm.06"/ 1.2mm all.04"/ 1mm "/ "/ 70-90mm 0.01mm.0015"/ 3.3"/ 85mm.31"/ 8.3mm.06"/ 1.2mm all.04"/ 1mm / / 15-55mm 0.02mm.002 / 4.49 /115mm.177 / 5mm.10 /1.8mm all.059 / mm 1.5mm dia / / 35-75mm 0.02mm.002 / 4.49 /115mm.315 / 8mm.157 /2.2mm all.079 / / / 55-95mm 0.02mm.002 / 4.49 /115mm.315 / 8mm.157 /2.2mm all.079 / / / mm 0.02mm.002 / 4.49 /115mm.315 / 8mm.157 /2.2mm all.079 / "/ "/ mm 0.02mm.002"/ 4.49"/ 115mm.315"/ 8mm.157"/ 2.2mm all.079"/ 0.04mm 2mm dia / / 15-75mm 0.02mm.003 / 6.89 /175mm.196 / 5mm.07 /1.8mm all.059 / mm 1.5mm dia / / mm 0.02mm.003 / 7.77 /195mm.315 / 8mm.086 /2.2mm all.079 / mm 2.0mm dia. ccuracy: Refer to the list of specifications Resolution:.001,.0005, or mm, 0.02mm, or 0.005mm Display: CD nalog / Digital Power Supply: attery (1pc) attery life: pprox. 350 hours Force: N Dust/Water protection level: IP67 Provided with inspection certificate. Function Zeroset, Preset, uto power OFF, /, conversion Data hold, Max/Min value holding, Data output Optional ccessories 21J300D: SPC cable kit (80 / 2m) for , , , , , , R Sø0.6 Sø1 Sø Sø1 Sø Sø / -552 / -553 / -554 / -556 / -557 / -513 /-515/ -514 / -516 / -517 / -558 Edge R 0.1 mm all ø 0.6mm, ø 1mm, ø 1.5mm and ø 2mm F-54
2 9 9 Digimatic Caliper Gages SERIES 209 External Tube Thickness Measurement Versatile OD measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper Gages provide error-free CD readings as well as data output for SPC analysis. External measurement type ccuracy: Refer to the list of specifications Resolution:.001,.0005, or mm, 0.02mm, or 0.005mm Display: nalog / Digital Power Supply: attery (1pc) attery life: pprox. 350 hours Force: N Dust/Water protection level: IP67 Provided with inspection certificate. Function Zeroset, Preset, uto power OFF, / conversion, Data hold, Max/Min value holding, Data output * type 3, 4 does not have max. min. value hold. Optional ccessories 21J300D: SPC cable kit (80 / 2m) SPECIFICTIONS / Order No. Resolution ccuracy Max. Depth "/ "/.0008"/ 1.37"/ 10mm 0.005mm 0.05mm 35mm "/ "/.001"/ 1.37"/ 10mm 0.005mm 0.02mm 35mm "/ "/.0015"/ 20mm 0.01mm 0.03mm "/ "/.0015"/ 20mm 0.01mm 0.03mm / /.002 / 4.33 / 0.02mm 0.04mm 115mm / /.002 / 4.33 / 0.02mm 0.04mm 100mm / /.002 / 4.33 / 0.02mm 0.04mm 115mm / /.003 / 7.48 / 0.02mm 0.06mm 190mm / /.003 / 5.9 / / mm / 0.02mm 0.06mm.004 / 0.08mm length Hb.75" / 19.1mm.85"/ 21.7mm 3.2"/ 85mm.97"/ 24.7mm 3.2"/ 80mm.97"/ 24.7mm 24.9mm 32mm 1.14 / 30mm 25mm 150mm 25mm 7.48 / 1.06 / 190mm 27mm length Hf of Mass(g) /type of set up.73"/ 18.6mm all.059"/1.5mm dia. 240 oth/.58"/ 14.8mm Desc.24"/ 6mm dia. 175 oth/ C.97"/ 24.6mm all.059"/1.5mm dia. 280 oth/.10"/ 2.5mm all.059"/1.5mm dia. 270 oth/.1 /25.4mm all.118 / 3.0mm dia. oth /.059 /3.5mm all.118 / 3.0mm dia. oth /.77 /19.4mm Desc 1.97 / 50mm dia. oth / D 25mm all.197 / 5.0mm dia. oth /.13 /3.5mm all.197 / 5.0mm dia. oth /.77 /19.5mm Desc 1.97 / 50mm dia. oth / D ø ø1.5 ø ø3 ø ø C D Hb Hf Hf Hb all ø 1.5 and 3mm for wall thickness all ø 1.5 and 3mm for min. wall thickness ø3mm / 9mm Disk ø6mm for flat surfaces Disk ø50mm for flat surfaces F-55
3 Dial Caliper Gages SERIES 209 Internal Measurement These Dial Caliper Gages are used only as comparison gages, and should be used along with a Setting Ring or a micrometer. The caliper is spring loaded and makes point contact at constant measuring pressure SPECIFICTIONS Order No. Graduation ccuracy Max. Depth Max. Depth Min. Width Size (mm) " " ±.0008".47".027".023" R " " ±.0008" 1.37".09".032" ø " " ±.0015" 3.3".19".06" ø " " ±.0015" 3.3".26".06" ø " " ±.0015" 3.3".26".06" ø " " ±.0015" 3.3".31".06" ø " " ±.0015" 3.3".31".06" ø " " ±.0015" 3.3".31".06" ø " " ±.0015" 3.3".31".06" ø " " ±.0015" 3.3".31".06" ø " *.0005" ±.0015" 3.3".31".06" C ø " *.0005" ±.0015" 3.3".31".06" C ø " *.0005" ±.0015" 3.3".31".06" C ø1 250 *Interchangeable contact points (additional anvil 4 pcs.) with ball point.04 dia. Order No. Graduation ccuracy Max. Depth Max. Depth Min. Width Size (mm) mm mm ±0.015mm mm 0.7mm 0.5mm R mm mm ±0.015mm 35mm 2.3mm 0.8mm ø mm mm ±0.03mm 85mm 5.2mm 1.2mm ø mm mm ±0.03mm 85mm 7mm 1.2mm ø mm mm ±0.03mm 85mm 7mm 1.2mm ø mm mm ±0.03mm 85mm 8.3mm 1.2mm ø mm mm ±0.03mm 85mm 8.3mm 1.2mm ø mm mm ±0.03mm 85mm 8.3mm 1.2mm ø mm mm ±0.03mm 85mm 8.3mm 1.2mm ø mm mm ±0.03mm 85mm 8.3mm 1.2mm ø mm * 0.01mm ±0.03mm 85mm 8.3mm 1.2mm C ø mm * 0.01mm ±0.03mm 85mm 8.3mm 1.2mm C ø mm 209-3* 0.01mm ±0.03mm 85mm 8.3mm 1.2mm C ø mm mm ±0.05mm 175mm 5mm 1.8mm ø mm mm ±0.05mm 175mm 8mm 2.2mm ø mm mm ±0.05mm 175mm 8mm 2.2mm ø2 440 *Interchangeable contact point (additional anvil 5pcs.) with ball point 1mm dia Mass(g) C F-56
4 of Points S R0.4 / R0.4: , R0.75 / R0.75: Dial Caliper Gages SERIES 209 External Measurement K/K ø2.0 / ø2.0 ball: , , , ø1.5 / ø1.5 ball: , , , R/S R0.4 / ø1.5 carbide ball: , RK/K ø1.5 / ø1.5 ball: Thickness Thickness C S/R R T PR PK R0.75 / ø2 ball: ø2 / ø2.5 ball: , : : ø2 / R0.5: , : : SPECIFICTIONS Order No. Graduation ccuracy Max. Max. Depth Depth Order No. Graduation ccuracy Max. Max. Depth Depth Min. Width Min. Width Size (mm) " " ±.0008" 1.37".75".75" K/K ø " " ±-.001" 1.37".85".58" T ø " " ±.0008" 1.37".75".035" RK/K ø " " ±.0008" 1.37".75".035" R/S Chisel R0.4, ø " " ±.005" 1.38" - - PK ø2, Chisel R " " ±.005" 1.38" - - PR ø " " ±-.0015" 3.2".97".97" S Chisel R " " ±.0015" 3.2".97".97" K/K ø " " ±.0015" 3.2".97".10" RK/K ø " " ±.0015" 3.2".97".10" R/S Chisel R0.4, ø " " ±.002" 6.7" 1.26".18" K/K ø " " ±.002" 6.7" 1.26".18" R ø " " ±.003" 6.7" 1.26".18" K/K ø2 580 Size (mm) 0-10mm mm ±0.015mm 35mm 19.1mm 18.6mm K/K ø mm mm ±0.02mm 35mm 21.7mm 14.8mm T ø mm mm ±0.03mm 85mm 7mm 24.6mm K/K ø mm mm ±0.03mm 85mm 7mm 24.6mm S R mm mm ±0.03mm 80mm 7mm 2.5mm R/S Chisel R0.4, ø mm mm ±0.03mm 80mm 7mm 2.5mm RK/K ø mm mm ±0.1mm 36mm - - PK ø2, Chisel R mm mm ±0.1mm 33mm - - PR ø mm mm ±0.05mm 170mm 10mm 4.5mm K/K ø mm mm ±0.05mm 170mm 10mm 4.5mm PR ø2, Chisel R mm mm ±0.05mm 170mm 10mm 4.5mm R ø mm mm ±0.05mm 170mm 10mm 4.5mm S/R ø2, Chisel R F-57
![Graduation Dial face ccuracy force Dimension [ / (max) / (min)] 6-18mm 209-2 0.01mm 0-100-100 ±40µm 1.2N or less 40mm 1.0mm 2.5mm 10-22mm 209-3 0.01mm 0-100-100 ±40µm 1.2N or less 40mm 2.0mm 2.5mm 20-32mm 209-4 0.](/docs-images/86/94739821/images/5-1.jpg "01mm 0-100-100 ±40µm 1.2N or less 40mm 4.2mm 2.5mm 5-15mm 209-152 0.01mm 0-100 ±25µm 1.2N or less 30mm 2.0mm 0.7mm 10-20mm 209-153 0.01mm 0-100 ±25µm 1.2N or less 30mm 5.0mm 0.7mm 10-30mm 209-171 0.")
5 Dial Caliper Gages SERIES 209 Internal Measurement These Dial Caliper Gages are used only as comparison gages, and should be used along with a Setting Ring or a micrometer. The caliper is spring loaded and makes point contact at constant measuring pressure. SPECIFICTIONS Order No. Graduation Dial face ccuracy force Dimension [ / (max) / (min)] 6-18mm mm ±40µm 1.2N or less 40mm 1.0mm 2.5mm 10-22mm mm ±40µm 1.2N or less 40mm 2.0mm 2.5mm 20-32mm mm ±40µm 1.2N or less 40mm 4.2mm 2.5mm 5-15mm mm ±25µm 1.2N or less 30mm 2.0mm 0.7mm 10-20mm mm ±25µm 1.2N or less 30mm 5.0mm 0.7mm 10-30mm mm ±25µm 1.2N or less 65mm 5.2mm 0.7mm 20-40mm mm ±25µm 1.2N or less 65mm 9.5mm 0.7mm.04"DI. / ø1mm Steel ball Dial Diameter: 2" / 51mm Order No. Graduation ccuracy mm 0.025mm ±0.04mm mm 0.025mm ±0.04mm mm 0.025mm ±0.04mm Order No. Graduation ccuracy ± ± ± / 8mm C D 10-35mm / mm 2.3mm 4.8mm 2.3mm 30-55mm / mm 4.3mm 17.0mm 14.5mm 50-75mm / mm 7.6mm 11.5mm 9.8mm.09" / 2.3mm F-58
Thickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
DIAL SNAP GAUGE. dial indicator is not included W. optional indicators
DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N
1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
Measuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
Height Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
L éditorial. Robert Renaud
L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce
Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown.
SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES
Digimatic Indicators Pages Dial Indicators Pages Lever Indicators Pages Thickness Gauges Pages
Indicators Digimatic Indicators Pages 246-259 Dial Indicators Pages 260-294 Lever Indicators Pages 295-307 Thickness Gauges Pages 308-312 Indicator Depth Gauges Pages 313-315 Caliper Gauges Pages 316-322
Dial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
Q-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
ISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
Measurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
ABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
ABSOLUTE Digimatic Indicator ID-C
SERIES 543 Standard Type Resolution:.1mm type.1mm.1mm type*.1mm/.1mm.5 /.1mm type.5 /.1mm.5 /.1mm type*.5 /.1 /.5 /.1mm/.1mm * Switchable resolution Measuring : Refer to the list of specifications 938882
Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
DIGITAL HEIGHT GAUGE. clamp
DIGIT HEIGHT GUGE lamp 55 40 6 Ø8 for 10-0 65 50 10 Ø8 for 10-500/600 0 55 10 Ø8 for 10-0 10-500 10-0 Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inh, BS/INC, ata hol, TO, set BS/INC is for asolute
200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
Instructions for checking caliper gauges of the series Int/Odi and ID/OD - absolute measurement
Instructions for checking caliper gauges of the series Int/Odi and ID/OD - absolute measurement 1 Generalties This instruction follows the checking instructions for caliper gauges according to VDI/VDE/DGQ
Multimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
Bore Gage. Inside Diameter Measurement. Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Inside Diameter Measurement Bore Gage Bulletin No. 2005 NEW Best-selling range of bore gages now offers better accuracy, user-friendliness and durability Bore
YOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
Available in Carbon Fiber
845-454-3111 800-549-4243 DORSEY LARGE DIAMETER GAGES LDF Series LDVA Series LDA Series LDD Series Ultra Large diameter gage. Measurement range 120" - 132" Weight 10.5lbs/4.76kg Carbon fiber diameter gages
Fall Savings! HUGE SAVINGS!
Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without
Check Points. for Measuring Instruments
Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring
PRECISION TOOL SALE SPRING 2018
PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers
QA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
MARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
ПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
MITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
Dial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
Autocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Over 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
METROLOGY In Germany at home in demand worldwide.
METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,
AutoCal Electronic Caliper
2016 REV. 0416 NEW! AutoCal Electronic Caliper Great for Garage and Shop Environments! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great
Dial Indicator. SERIES 2 Standard Type, 0.01mm Resolution
Dial Indicator SERIES 2 Standard Type, 0.01mm Resolution Series 2 dial indicators are Mitutoyo s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having a bezel with
t in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until
ts n e l i-ta t l u M ion t c A in + al rigin Swiss tknif e o c ke artner for specialist retailers romotion Brochure Spring 17 In Germany at home in demand worldwide valid until 30.0.17 1 MUL T I -TA L
NEW! AutoCal. Electronic Caliper
2015 REV. 0515 AutoCal Electronic Caliper NEW! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great for garage and shop environments Heavy Duty
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
TESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS
CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC
E905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software
THE PRODUCTION COMPARATOR STAND
845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat
Precision Measuring Tools and Test Instruments EDITION
Precision Measuring Tools and Test Instruments EDITIO 2015/2016 info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 3 4 5 6 8 9 10 11 In our catalogue you will find several pictograms beside the
TECHNICAL BID. T 4329 (E-Tender I.D. No. ) Subject: Supply of Various Measuring Instruments for TMD-6 of 500 MW Unit No.6 of GSECL Ukai TPS.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED Ukai Dam, Taluka: Fort Songadh, Dist:Tapi 394680. Ph. 91-2624-233215, 233257 Fax: 91-2624-233300, 233315.e-mail: ukaitps@gebmail.com. Website: www.gsecl.in
GT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
Unit specifications. Nil. Option 1. Power supply/output connection cable. Option 2
Series -PSE3 RoHS Remote Type 2-Color Display Digital Pressure Sensor Controller How to Order 2 3 4 5 Nil Options/Part No. L Input/Output specifications NPN2 output to 5 V output NPN2 output 4 to 2 m output
Standard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
Dial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
Page : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
0230 / 0231 Workshop calipers with parallax-free reading
0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external
Fred V. Fowler Company Inc. AUTO TOOL CRIB
Fred V. Fowler Company Inc. AUTO TOOL CRIB DISC BRAKE MEASUREMENT VERNIER DISC BRAKE MICROMETER Sharp black graduations on satin chrome finish Range: 0.3" 1.3" Graduation:.0001" Jaw depth: 3.5" Ratchet
Dial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Discipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
Caliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
Lever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035 Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
TECHNICAL BID T
` TECHNICAL BID T - 3878 Subject : Supply of Various Measuring Instruments for TMD-I,UKAI TPS Due on Date : At 3.30 P.M. (if Possible) EMD paid YES / NO EMD Demand Draft No. Date : OR SSI / NSIC Certification
Catalog No. E Check Points. for Measuring Instruments
Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding
Cal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
TRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
rtisan Technology Group is your source for quality new and certified-used/pre-owned equipment FST SHIPPING ND DELIVERY TENS OF THOUSNDS OF IN-STOK ITEMS EQUIPMENT DEMOS HUNDREDS OF MNUFTURERS SUPPORTED
MarCator 1087 ABS USB. No interface box is required! Simple and inexpensive way to set up a multiple measuring. Digimatic. evaluation instrument
- -46 MarCator 1087 The new Digita Indicator Marcator 1087. The muti-functiona Digita Indicator with a combined anaog and digita dispay; pus toerance and dynamic measuring functions. D y n a m i c m e
Lever-Type Dial Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT DIAL TEST INDICATORS. Bulletin No. 2232
Lever-Type Indicators DIAL TEST INDICATORS SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Bulletin No. 2232 Enhanced Durability, Sensitivity and Readability Inspection The QR code is used by the factory to
Lever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035(2) Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
Hi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges
Gauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
COMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
A.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
TESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
CALIBRATION PRICE LIST
THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
Discipline Mechanical Calibration Issue Date Certificate Number C-0393 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. Vernier Caliper (Digital/ Dial/ Scale) $ L.C.: 0.01 mm 0 to 150 mm 7.7 µm Using Caliper Checker 0 to 200 mm 8.1 µm 0 to 300 mm 9.3 µm 0 to 600 mm 13.9 µm 2.
MarCator 1087 R ABS. Just set once to zero. Battery service life is 3 years. Error free operation
- -6 MarCator 1087 R The new Digita Indicator MarCator 1087 R. The muti-functiona Digita Indicator with a combined anaog and digita dispay as we as toerance and dynamic measuring functions. Dynamic measuring
Remote Type Pressure Sensors Pressure Sensor Controllers
CT.EUS1-56B-UK Remote Type Pressure Sensors Pressure Sensor Controllers Compact Pressure Sensor for Pneumatics PSE53 Multi-channel Digital Pressure Sensor Controller PSE2 Compact Pressure Sensor for Pneumatics
+91-8048600379 Rampura Tools http://www.rampuratools.in/ We are one of the leading distributor, suppliers and traders of Measuring Instrument. Owing to their accurate measurement, sturdy construction,
MEASURING & LEVELING TOOLS
Calipers & Dividers...398, 399 Contour Markers...407, 408 Derrick Tape Refills...419 Derrick Tapes...419 Dial & Digital Indicators...422 Feeler & Pitch Gauge Sets...401 Finders & Scanners...400 Flange
JTC TOOL. 3Thickness Gauge. Thickness of paper, small parts and film can be measured only by holding them.
Thickness Gauge Thickness of paper, small parts and film can be measured only by holding them. Dial Indicator is used by being fitted to jig etc., while thickness gauge is held with our hand. Holding work
PHONE /
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over
Discipline Mechanical Calibration Issue Date Certificate Number C-0751 Valid Until Last Amended on
Last Amended on 10.03.2016 Page 1 of 5 I. DIMENSION 1. Vernier caliper $ 0 to 300 mm/0.01 mm ± 12.0 µm Using Caliper Checker 0 to 300 mm/0.02 mm ± 16.1 µm Using Caliper Checker 0 to 600 mm/0.01 mm ± 14.0
Climax Valve Repair Machines
VM7000 VM6000 VM8000 Climax Valve Repair Machines descriptions specifications operational dimensions components CLIMAX Portable Machine Tools, Inc. 6/00 1 Model VM7000 Valve Boring Machine Now you can
Quality Control for Poultrymen
Quality Control for Poultrymen Product Brief Egg Shell Thickness Measure Model 25-5 Eggs with shells that are too thin to stand up under normal handling conditions cost poultrymen thousands of dollars
Digimar 816 CL. Versatile. User-friendly operation... The measuring program... Precise measuring results...
- 2-8 Digimar 816 CL The new Height Measuring Instrument Digimar 816 CL. You want to obtain highly accurate measurement results without any complicated procedures? With the Digimar 816 CL you have the
2-Color Display Digital Flow Switch
-Color Display Digital Flow Switch Series Flow rate range:, 5, 5, l/min. Minimum unit setting:. l/min. (. l/min when the flow rate range is 5, 5, l/min.) Repeatability: ±%F.S. or less Grease-free Flow
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
Load Cells SIWAREX WL280 RN-S SA
Siemens G 2015 SIWREX WL280 RN-S S Load cell Overview Design The measurement element is a ring torsion spring made of stainless steel. Two strain-gage spirals (DMS) are applied to the upper and lower faces
140,- 329,- 210,- 329,- 739,- 509,- 350,- 126,- 117,- 126,- 434,- 217,- 488,- 586,- 524,-
AUGUS - OCOBER 07 AUGUS - OCOBER 07 RADIO CONROLLED WALL CLOCK Q O UA Available in Ø0 og Ø0 cm. AA battery operated. P Ø0 cm LI Y 9,- 0 Ø0 cm 09,- 0 DIGIAL INDICAOR DIAL INDICAOR + MAGNEIC SAND Base: 6
Price List. Calibration Fee
3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel. +66 577 5100 (Please contact : Customer Service Section Ext. 3101, 310) Fax. +66 577 3659 E-mail : cs@nimt.or.th Website : http://www.nimt.or.th
AEC-55 Series. Converter : AEC-55. Non-contact displacement measuring system. Specifications. Adopted ordered cables. Features and specifications
Converter : EC-55 dopted converter dopted cables : PU : PC cable Converter : EC-55 ( symbolize diameter) See each section. frequency DC to 2kHz -2dB See each section. -1 C to 55 C Thermal.1%/ C of drift
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
DOUBLE SQUARE SERIES 234: Ideal for precision layout work. Blades are hardened and tempered with a satin-chrome finish. COMBINATION SQUARE SET - 4 PIECE SERIES 233: Size of 4 4R 1610004 4 16R 1610014 4