ABSOLUTE Digimatic Indicator ID-C
|
|
- Ethelbert Garrison
- 6 years ago
- Views:
Transcription
1 SERIES 543 Standard Type Resolution:.1mm type.1mm.1mm type*.1mm/.1mm.5 /.1mm type.5 /.1mm.5 /.1mm type*.5 /.1 /.5 /.1mm/.1mm * Switchable resolution Measuring : Refer to the list of specifications Battery life: Approx. 5, hours under normal use direction switching, Power ON/OFF, Data output, Internal calculations using the simple formula of EZA198 21EZA199 21EZA15 21EZA15 type)** 21EZA197 models) 21EZA / 25.4mm) 2ACA571: Auxiliary spindle spring for 25mm/1 models*** 2ACA773: Auxiliary spindle spring for 5mm/2 models*** *Can be used on 12mm/.5 models only. **Not available for low measuring models. indicators. setting upper and lower tolerance limits. toggled Internal calculations using the simple formula ABSOLUTE, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors. to an appropriate angle for easy reading B B F-5
2 Resolution Range Order No. Model Accuracy Measuring Remarks.5 /.1mm*.5 / 12.7mm B ID-C112EXB.1 1.5N or less.5 /.1mm*.5 / 12.7mm B ID-C112CEX.1.4N -.7N Low measuring.5 /.1mm* 1 / 25.4mm B ID-C125EXB.1 1.8N or less.5 /.1mm* 2 / 5.8mm B ID-C15EXB.2 2.3N or less.5 /.1mm.5 / 12.7mm B ID-C112EX.1.9N or less.5 /.1mm.5 / 12.7mm B ID-C112CEX.1.2N -.5N Low measuring.5 /.1mm 1 / 25.4mm B ID-C125EXB.1 1.8N or less.5 /.1mm 2 / 5.8mm B ID-C112CEXB N or less * Switchable Resolution Type Resolution Range Order No. Model Accuracy Measuring Remarks.1mm* 12.7mm B ID-C112X.3mm 1.5N or less.1mm* 12.7mm B ID-C112CX.3mm.4N -.7N Low measuring.1mm* 25.4mm B ID-C125XB.3mm 1.8N or less.1mm* 5.8mm B ID-C15XB.6mm 2.3N or less.1mm 12.7mm B ID-C112X.2mm.9N or less.1mm 12.7mm B ID-C112CX.2mm.2N -.5N Low measuring.1mm 25.4mm B ID-C125XB.3mm 1.8N or less Stem dia. 3/8", #4-48 UNF Thread Resolution Range Order No. Model Accuracy Measuring Remarks.5 /.1mm*.5 / 12.7mm B ID-C112MX.1 1.5N or less.5 /.1mm*.5 / 12.7mm B ID-C112CMX.1.4N -.7N Low measuring.5 /.1mm* 1 / 25.4mm B ID-C125MXB.1 1.8N or less.5 /.1mm* 2 / 5.8mm B ID-C15MXB.2 2.3N or less.5 /.1mm.5 / 12.7mm B ID-C112MX.1.9N or less.5 /.1mm.5 / 12.7mm B ID-C112CMX.1.2N -.5N Low measuring.5 /.1mm 1 / 25.4mm B ID-C125MXB.1 1.8N or less.5 /.1mm 2 / 5.8mm B ID-C15MXB N or less * Switchable Resolution Type * Switchable Resolution Type 5.1 (5.8) (44.2) (83.85) (67.7) (2) (14.7) 19.5 (17.2) 12.7mm range models ø ø8 -.9 M2.5x.45 (#4-48 UNF) ø8 -.9 ø59 (ø9.52.3) 25.4mm range models (ø9.52.3) ø (19) ( )ANSI/AGD Type ø (19.65) (95) mm range models (66.65) (17.2) ø8 -.9 (ø9.52.3) ø59 M2.5x.45 (#4-48 UNF) Rotary display The display can be rotated 33, allowing use at a position where you can easily read the measurement value Calculation: f(x) = Ax Mounting the ID-C on a measuring jig and setting the multiplying factor 'A' (to any value) allows direct measurement without using a conversion table and improves measurement efficiency. Application example locking Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake. Setting measuring on low measuring models Spindle orientation Spring Weight Pointing vertically downward Yes Yes.5N Yes No.4N No Yes.3N No No.2N Yes No.2N Maximum measuring Note) Operation using configurations other than shown above is not guaranteed. Spindle orientation Spring Weight Pointing vertically downward Maximum measuring Yes Yes.7N Yes No.6N No Yes.4N No No Not guaranteed Not guaranteed Note) Operation using configurations other than shown above is not guaranteed (42.15) M2.5x.45 (#4-48 UNF) F-6
3 SERIES 543 Calculation Type Resolution:.2mm - 1mm or /.2mm - 1mm Measuring : 1.5N or less Battery life: Approx. 12 months under normal use direction switching, Power ON/OFF, Data output, APPLICATIONS A conventional Digimatic indicator simply displays a spindle displacement, but the Calculation-Type Digimatic indicator incorporates an internal calculation function in place of spindle displacement. With fixtures, measurements such as feeler, inside diameter and radius of curvature measurement can easily be obtained without the hassle of internal calculations using the formula Ax+B+Cx -1 as x) while the specified coefficients A, B and, C can be set with respect to the purpose of measurement or dimensions of to read your measurements directly, without fumbling for conversions. Measuring Force /.5 / 12.7mm B ID-C112REB N or less.2-1mm 1 / 25.4mm B ID-C125REB.12 2.N or less 2 / 5.8mm B ID-C15REB N or less Measuring Force.2-1mm 12.7mm B ID-C112RB.3mm 1.5N or less 25.4mm B ID-C125RB.3mm 2.N or less 5.8mm B ID-C15RB.6mm 2.3N or less *Flat back 27.6 ø1.5 Measuring Force /.5 / 12.7mm B ID-C112RMB N or less.2-1mm 1 / 25.4mm B ID-C125RMB.12 2.N or less 2 / 5.8mm B ID-C15RMB N or less B ø6.5 M #4-48 UNF (2.5) 67.7 ø / (14.2) 46.5 (44.2) 54.4 (5.95) ) F-7
4 SERIES 543 with Green/Red LED and GO/NG Signal Output the signal ID-C can output the signal of the values set. Substitute for the mechanical/ electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment. open-collector. indicated by the green/red LED and the "<, O, >" signs on LCD. ABSOLUTE, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on ø6.5 2 ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments. Resolution Range Order No. Model Accuracy Measuring.5 /.1mm.5 / 12.7mm B.12 2.N or less.5 /.1mm.5 / 12.7mm B.12 2.N or less Resolution Range Order No. Model Accuracy Measuring.1mm 12.7mm B.3mm 2.N or less Stem ø 8mm, M2. x.45 Thread ø1.5 4m, ø5mm, Core wire AWG/ Resolution Range Order No. Model Accuracy Measuring.5 /.1mm.5 / 12.7mm B.12 2.N or less Resolution:.1mm,.5 /.1mm or.1 /.1mm Measuring : 2.N or less Dust/Water protection level: IP54 Runout value holding, Counting direction switching, Power ON/OFF, : Rubber boot *When using the spindle lifting lever/cable, IP54 is not guaranteed. Output pattern Wire OK + NG Composition error Low High High High High Low High High High High Low High LED Red Green Red LCD < O > x.xxe indication I/O Specifications Wire Signal I/O Description Black Red I Orange O Tolerance judgment result Green OK O output: Only the terminal corresponding to a judgment Brown + NG O result is set to the below level. Yellow PRESET_RECALL ZERO Blue HOLD_RESET I I External input terminal: If the relevant terminal is set to the low level, its signal becomes true. Shield FG Connected to GND ø M (#4-48UNF) ø / (37.5) 13.5 (11.2) 43.5 (41.2) 67.4 (64.95) 8.7 (78.25) F-8
5 SERIES 543 with Max./Min. Value Holding With max./min. value holding function model of the ID-C Series Digimatic Indicators. Resolution:.1mm,.5 /.1mm or.1 /.1mm Measuring : 1.5N or less Battery life: Approx hours under normal use Dust/Water protection level: IP42 Runout value holding, Counting direction switching, Power ON/OFF, Data output, can be displayed during measurement. the upper and lower tolerances for max., min. and runout values. ABSOLUTE, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on..5 /.1mm.5 / 12.7mm ID-C112AE.12.1 /.1mm.5 / 12.7mm ID-C112AT.12.1mm 12.7mm ID-C112A.3mm.5 /.1mm.5 / 12.7mm ID-C112AM (19) 29.3 ø1.5 5 ø6.5 ø (14.2) 54.4 (5.95) 46.5 (44.2) ø M #4-48UNF (2.5) F-9
6 SERIES 543 Specially Designed for Bore Gage Application This ID-C Series Digimatic Indicators are exclusively designed for ID measurement. provides the easy of detection of hole diameter. enhance the intuition in reading. the upper and lower tolerances. upper/lower tolerance value can be ABSOLUTE, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on..5 /.1mm.5 / 12.7mm B ID-C112GE.12.1 /.1mm.5 / 12.7mm B ID-C112G.12.1mm 12.7mm B ID-C112G.3mm 29.3 ø B Resolution:.1mm or.5 /.1mm Measuring : 1.5N or less Battery life: Approx. 2 hours under normal use Dust/Water protection level: IP42 Power ON/OFF, Data output, Applicable Gages Series 511 and (64.95) ø6.5 ø / (14.2) 46.5 (44.2) 54.4 (5.95) Installed on bore gage ) (2.5) 6.8 F-1
Digimatic Indicators Pages Dial Indicators Pages Lever Indicators Pages Thickness Gauges Pages
Indicators Digimatic Indicators Pages 246-259 Dial Indicators Pages 260-294 Lever Indicators Pages 295-307 Thickness Gauges Pages 308-312 Indicator Depth Gauges Pages 313-315 Caliper Gauges Pages 316-322
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More information1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
More informationPrecision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown.
SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES
More informationDIAL SNAP GAUGE. dial indicator is not included W. optional indicators
DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationThickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
More informationDial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More information10 switches simultaneously. The settings of the master sensor (source of copy) can be copied to the slave sensors. Reducing setting labor
2-Color Display High-Precision Digital Pressure Switch ZSE ISE RoHS ZSE ISE IP65 ZSE40 ISE40 M8 connector type ZSE10 ISE10 ISE70 ZSE80 ISE80 PS ISA3 ISA2 ISE35 Applicable Air, Non-corrosive gas, Non-flammable
More information2D Image Correlation Encoder Page 445
Scale Units and Linear Scales Scale Units Page 417 Linear Scale Page 425 NC-Scales Page 438 2D Image Correlation Encoder Page 445 416 Functions ORIGIN (ABS-Zero) Auto OFF after 20 min. non use Low voltage
More informationSeries 10-ZSE40A(F)/10-ISE40A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High Precision Digital Pressure Switch How to Order For positive pressure Clean series For vacuum/ compound pressure 01 N01 W1 10 Rated pressure range ISEA
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Settings can be copied to up to 1 slave sensors at once. The settings of the master sensor can be copied to the slave sensors. Reduced setting efforts
More information0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More information2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _
Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:
More information2-Color Display High-Precision Digital Pressure Switch Series ZSE40A(F)/ISE40A
2-Color Display High-Precision Digital Pressure Switch Series ZSEA(F)/ISEA New M8 connector type RoHS IP65 Applicable fluid Air, Non-corrosive gas, Non-flammable gas Can copy to up to 10 switches simultaneously.
More informationThe platform is placed on the weighing platform using three or four height-adjustable elastomer bearings (EL 120), in order to avoid twisting.
LCS130 2t Description The load cell LCS130 is used in platform-type weighing scales. Three to four load cells support a platform of any size. The output current calibration allows parallel connection of
More information3-step setting. 2-Color Display High-Precision Digital Pressure Switch. Series ZSE30A(F)/ISE30A. Added vacuum range.
2-Color Display High-Precision Digital Pressure Switch Series ZSE3A(F)/ISE3A RoHS Can copy to up to 1 switches simultaneously. The settings of the master sensor can be copied to the slave sensors. Reducing
More informationPG-30 PRESSURE GAUGES P G R - N FEATURES MODEL NUMBER DESIGNATION
marking Compatible with EMC directive INTERNAL STRUCTURE 5 1 2 6 4 3 Part name Material FEATURES 1 Pressure sensor P-2000 Compact and lightweight general-purpose pressure gauges Innovative general-purpose
More informationYOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationTechnical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
More informationPneumatic Drive Type Drill Bit Breakage Detection Sensor. DFM3 Series. The World's First!! Pneumatic-Drive Type. Catalog / Instruction Manual US.PAT.
Pneumatic Drive Type Drill Bit Breakage Detection Sensor DFM3 Series The World's First!! Pneumatic-Drive Type Catalog / Instruction Manual US.PAT. Pneumatic Drive Type Drill Bit Breakage Detection Sensors
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type. MPa MPa (ISE75H) 2-color digital. Functions
-Color Display Digital Pressure Switch /75/75H Series NPN/PNP open collector outputs added. Zero-cut off display function added. For General Fluids For Air Rated Pressure Metal Body Type 0 5 (E75) () -Color
More information2-Color Display Digital Pressure Switch. NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure Metal Body Type
Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red
More information* E8MS-N1 is only 1-channel pressure sensor controller. E80-C2 can be used. For more details, please refer to E80 catalogue.
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-(India) Tel : -7977 Fax : -7977 E-mail : sales@ashalain.com Sensor Four-Input-Channel Sensor
More informationACTUATORS POSITION SENSOR
POSITION SENSOR 1 2 SUMMARY P INTRODUCTION PAGE 4 P LTS POSITION SENSOR PAGE 5 P LTL POSITION SENSOR PAGE 9 SUMMARY P LTE POSITION SENSOR PAGE 12 3 INTRODUCTION INTRODUCTION Magnetic position sensors are
More informationAutoCal Electronic Caliper
2016 REV. 0416 NEW! AutoCal Electronic Caliper Great for Garage and Shop Environments! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great
More informationMagnescale Co., Ltd. High Rigidity High Operability = Tough Sensor. Magnescale Co., Ltd.
Magnescale Co., Ltd. International Sales Department 3-1-4 Edagawa, Koto-ku, Tokyo 135-51, Japan Magnescale Americas Inc. 1 Technology Drive, Suite F7, Irvine, CA 9218, USA Magnescale Europe GmbH Antoniusstrasse
More informationNEW! AutoCal. Electronic Caliper
2015 REV. 0515 AutoCal Electronic Caliper NEW! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great for garage and shop environments Heavy Duty
More information9.8 mm. Digital Pressure Switch. 3-step setting. RoHScompliant. Series ZSE10(F)/ISE10. Vertical mounting space reduced to approx.! Reduced in depth!
Digital Pressure Switch Series ZSE1(F)/ISE1 Low profile 26.1mm 9.8 mm 13.5 mm 53.4 mm Reduced in depth! (Actual size) RoHScompliant Vertical mounting space reduced to approx.! 1 2 Position Detection Switch
More informationMITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationMF7. Hydraulic Lift Pumps and Related Components
Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump
More informationMotorized Linear Actuators. EZS Series SPV Series EZC Series EZA Series PWA Series
Motorized Linear Actuators EZS Series SPV Series EZC Series EZA Series PWA Series Advancing Positioning Applications Oriental Motor s Motorized Actuators Oriental Motor offers a broad lineup of motorized
More informationMANUAL DE INSTRUÇÕES DO ANEMÔMETRO DIGITAL MODELO AN-3040
MANUAL DE INSTRUÇÕES DO ANEMÔMETRO DIGITAL MODELO AN-3040 Leia atentamente as instruções contidas neste manual antes de iniciar o uso do anemômetro Introduction Congratulations on your purchase of the
More information1.3 LINAX Lxs (shuttle) NEW
1.3 LINA Lxs (shuttle) NEW Stroke Installation length LINA Lxu (and Lxs) Installation length = Stroke + 130mm This LINA Lxs linear motor axes can be controlled only with the new, more powerful ENA vi 75V8
More informationSA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
More informationActuator ID10. Product Data Sheet Feature
Product Data Sheet www.moteck.com Actuator ID1 ID1 features its heavy load capability and high speed design, which is suitable for various industrial applications requiring quick movement, such as agricultural
More informationElectronic Pressure Switch EDS 3000
Description: The EDS 3000 is a compact, electronic pressure switch with integral digital display. The unit can have one or two switching outputs, and there is the option of an additional analogue output
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
More informationDial Indicator. SERIES 2 Standard Type, 0.01mm Resolution
Dial Indicator SERIES 2 Standard Type, 0.01mm Resolution Series 2 dial indicators are Mitutoyo s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having a bezel with
More informationPG-30 PRESSURE GAUGES P G R - N MODEL NUMBER DESIGNATION
INTERNAL STRUCTURE 5 1 marking Compatible with EMC directive 2 6 4 3 Part name Material 1 Pressure sensor P-2000 2 Sensor O ring NBR 3 Adaptor Aluminum Die-casting 4 Case O ring NBR 5 Case PBT (Polybutyleneterephthalate)
More informationN4 Series Magnetic Encoder Module High Resolution Module
Features and Benefits Two channel quadrature output Industry standard 7272 line driver output RS-422 compatible output 5V output standard; 24V output available Options up to 5000 pulses per channel per
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationDPS280 / DVS280 Series
1 2 3 4 5 6 7 8 Do not use corrosive or flammable gases or liquid with this product. Please use within the rated pressure range. Do not apply pressure beyond recommended maximum pressure, permanent damage
More informationD660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
More informationIntelligent Positioner
Intelligent Positioner Construction The GEMÜ epos digital electro-pneumatic positioner detects the valve position via its external LongLife travel sensor. It has a solid housing with protected operating
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Series ZSE3/ISE3 2-color digital display allows you to choose the setting according to your application requirements. 4 different display settings
More informationUser's Guide. Vane Anemometer. Model Measures Air Velocity & Temperature. Degrees C/F switchable
User's Guide Vane Anemometer Model 451112 Measures Air Velocity & Temperature Degrees C/F switchable 6 selectable units of measure Data Hold function Introduction Congratulations on your purchase of Extech
More informationTop quality Plug & weigh
FORKLIFT TRUCK SCALES iforks Completely wireless fork scale BENEFITS 5 Minutes installation Completely wireless: no cabling Digital calibration Weight correction for forklift mast tilt No de-rating of
More informationMaterial: Weight: Shaft Loads: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
More informationMS-13SR series Spring Return Linear Potentiometers
Manufactured in UK Rugged Construction Compact Design Sealed to IP67 Long Life Excellent Linearity Regulated Output Options The MS-13SR series of linear potentiometers are designed to withstand the harsh
More informationJUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
More informationANALOG. PARAMETER SPECIFICATION Measured Variable: Displacement, Velocity (magnitude only) 16 bit or mm, whichever is greater
T E M P O S O N I C S I I I ANALOG P r o d u c t S p e c i f i c a t i o n s F e a t u r e s Superior resolution and repeatability Absolute displacement and velocity measurement Modular, non-contacting
More informationType 2REX-A. Oil & Gas / Heavy Industry
Oil & Gas / Heavy Industry Type 2REX-A EN 60079 Electrical Specifications Code: Incremental Resolution: 1 to 10,000 ppr (pulses per revolution) Supply Voltage: ** 4.5 Vdc min. to 30 Vdc max. (45 ma max.
More informationMDS-E/EH Series Drive Units
MDS-E/EH Series Drive Units MDS-E Series Drives and Motors MDS-E Series 1-Axis Servo Drive Unit Model Number V1-20 V1-40 V1-80 V1-160 V1-160W V1-320 V1-320W Stocked Item - - S S - - - Drive Unit Category
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH CANopen, CAN J1939 Output Data Sheet SENSORS Document Part Number 551027
More informationE905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
More informationMotion without compromise
Toothed belt and spindle axes ELGA Clean, protected, strong Motion without compromise Highlights Protected: insensitive to harsh ambient conditions Clean: virtually no particle emissions for use in cleanrooms
More informationRadial piston pump PR4 Series 1X
Radial piston pump R4 eries 1X RE 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar Maximum displacement cm 3 R4-1X/1,00-450WA01M01 Features elf-priming,
More informationSeries ZSE30/ISE30. High Precision, 2-color Display Digital Pressure Switch. With One-touch fittings are newly introduced. PSE
High Precision, 2-color Display Digital Pressure Switch Series SE30/ISE30 SE ISE PSE I SE3 PS I SE 1 2 SP ISA2 IS SM PF2 IF Data With One-touch fittings are newly introduced. Straight type Elbow type 16-2-1
More informationMarCator 1087 ABS USB. No interface box is required! Simple and inexpensive way to set up a multiple measuring. Digimatic. evaluation instrument
- -46 MarCator 1087 The new Digita Indicator Marcator 1087. The muti-functiona Digita Indicator with a combined anaog and digita dispay; pus toerance and dynamic measuring functions. D y n a m i c m e
More informationArm - TX series 40 family
Arm - TX series 40 family Characteristics Stäubli Faverges 2005 D18327304A - 02/2005 The specifications contained in the present document can be modified without notice. Although all necessary precautions
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationFunction ECU, Wireless
Commercial Vehicle Systems Product DATA PD-551-000 Function ECU, Wireless The is a Gateway Receiver system to alert the driver if any monitored tyre runs under its normal pressure or above its normal temperature.
More informationRI360P0-QR24M0- INCRX2-H1181 Contactless Encoder Incremental
RI360P0-QR24M0- INCRX2-H1181 Contactless Encoder Incremental Features Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per
More informationOver 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
More informationDA 15 N 06 BLDC 250 DA 15 N 12 BLDC 250
1/16 DA 15 N DA 15 N 6 BLDC 25 DA 15 N 12 BLDC 25 2/16 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Command Signal... 7 4.1. Position Feedback Signal... 7 5. Materials
More information2-colour display. Digital Pressure Switch. Stainless diaphragm Oil-free (Single-layer diaphragm structure) IP65 compliant
-Colour Display Digital Pressure Switch Stainless diaphragm Oil-free (Single-layer diaphragm structure) Sensor parts: Stainless steel 6 Fitting parts: Stainless steel 4 The sensor and fitting parts can
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH Ethernet POWERLINK.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Models RP and RH Ethernet POWERLINK SENSORS Document Part Number 551191 Revision A Data Sheet Model RP Profile-style
More informationEBOX SMB5, SMB2 SM5, SM2 MT50, MT20
EBOX SMB5, SMB2 SM5, SM2 MT50, MT20 User manual Description This manual describes products of the EBOX, SMB5, SMB2, SM and MT series. The purpose of these sensors is to measure linear or angular displacements
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationDifferential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate Highly accurate measurements with calibration certificate Simple and quick
More informationOPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software
More informationLevel limit switch Series RN 4000 Selection list. Overview / Specification / Applications
Table of contents Page Overview / Specification / Applications P2 ----------------------------------------------------------------------------------------------------------- Selection P3 -----------------------------------------------------------------------------------------------------------
More informationApplication Support. Product Information. Omron STI. Support Engineers are available at our USA headquarters from
Omron STI Application Support Thank you for your interest in Omron STI products. Please contact Omron STI with your application questions. Support Engineers are available at our USA headquarters from 4:00
More informationRotating torque meter
Rotating torque meter A longtime dream, a slip-ring-less rotating torque meter, UTM, has just become available. We developed it as a high performance sensor for embedded applications. Of course, it is
More informationOrdering Information. Application Example. New General-purpose Incremental-type. Rotary Encoder. Accessories (Order Separately)
Rotary Encoder New General-purpose Incremental-type Rotary Encoder A wide operating voltage range of 5 to 24 VDC (open collector model). Resolution of 2,000 pulses/revolution in 40-mm housing. can be adjusted
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors MH-Series Mobile Hydraulic in-cylinder Sensor Model MH Analog Output Data Sheet SENSORS Document Part Number 550824 Revision
More informationProfibus-DP Output. Profibus-DP output: Standard Profibus-DP signal. Profibus Output
: Standard Profibus-DP signal Rugged fully closed design Linear, absolute measurement LEDs for sensor diagnostics Digital technology, stable and reliable Non-contact sensing technology Superior accuracy,
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch CSM DS_E_3_1 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The world's
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More informationElectronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
More informationD4GS-N CSM_D4GS-N_DS_E_7_2
Slim Safety Door Switch D4GS-N CSM_D4GS-N_DS_E_7_2 Slim Safety Door Switches with IP67 Rating Slim design with a width of only 17 mm (three-contact models). Reversible design allowing either front or rear
More informationK3D300 ±200kN. Description
K3D300 ±200kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More informationStationary Screwdriver Spindles with Inline Torque Sensor
Screwdriving technology Automation Air motors Air tools MINIMAT MICROMAT the smallest Piezo-Spindle in the world Stationary Screwdriver Spindles with Inline Torque Sensor Screwdriver Spindles with Function
More informationRadial piston pump PR4 series 1X
Radial piston pump R4 series 1X RA 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar (10150 psi) Maximum displacement cm 3 (0.1 in 3 ) R4-1X/1,00-450WA01M01
More informationSSI. Synchronous Serial Interface
T E M P O S O N I C S R S E R I E S SSI Synchronous Serial Interface P r o d u c t S p e c i f i c a t i o n s PARAMETER Measured Variable: Resolution: Non-Linearity: SPECIFICATION Displacement Up to 0.002
More informationISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
More informationSP1. Compact String Pot Voltage Divider Output SP1-25 SP1-50 SP SP1-50-3
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
More informationSTT280 SEALED TILT SENSOR
STT280 SEALED TILT SENSOR PERFORMANCE ELECTRICAL Measurement range Supply voltage Vdc Over voltage protection Vdc Maximum supply current ma Reverse polarity protection Short circuit protection Output to
More informationK3D300 ±50kN. Description
K3D300 ±50kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More informationHigh Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector
Non-rotating Type High Precision Scale Cylinder Series CEP1 ø12, ø How to Order CEP1 12 0 F9N L F High precision scale cylinder Mounting bracket Direct mounting front tapped type Foot type Front flange
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More information