Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown.
|
|
- Avice Cooper
- 6 years ago
- Views:
Transcription
1 SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES 500 with Dust/Water Protection Conforming to IP67 Level Can be used in workshop conditions exposed to coolant, water, dust or oil Easy to use - no need to wipe or clean the scale Incorporates absolute measurement system Automatic power-on/off Data output function With thumb roller All calibrations are performed to Standards Coolant Proof Caliper - Inch/Metric Order No. Resolution MSLP SPECIAL 0-6 /0-150mm *.0005 /0.01mm $ $ $ /0-200mm *.0005 /0.01mm $ $ $ /0-200mm /0.01mm $ $ $ /0-300mm *.0005 /0.01mm $ $ $58.00 *without SPC data output Coolant Proof Micrometers SERIES 293 with Dust/Water Protection Conforming to IP65 Level IP65 protection level Water-resistant SPC connection cable is available Auto power ON/OFF function With a standard bar except for 0-25mm/0-1" Coolant Proof Micrometer - Inch/Metric SPC Cable w/data switch MSLP SPECIAL 05CZA662: SPC cable (1m/40 ) $ $ CZA663: SPC cable (2m/80 ) $ $ Resolution Order No. MSLP SPECIAL 0-1" / mm / 0.001mm $ $ $ " / mm / 0.001mm * $ $ $ " - 2 / mm / 0.001mm $ $ $ " - 2 / mm / 0.001mm * $ $ " - 3" / mm / 0.001mm $ $ $ " - 3" / mm / 0.001mm * $ $ $ " - 4" / mm / 0.001mm $ $ $ " - 4" / mm / 0.001mm * $ $ $35.00 Bore Gauge - Inch Measuring Bore Gauge SERIES 526 for Extra Small Holes Order No. With 2923SB-10 Graduation.0001" SPC Cable w/data switch MSLP SPECIAL 05CZA624: SPC cable (1m/40 ) $ $ CZA625: SPC cable (2m/80 ) $ $ To measure diameters of small holes Radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is shown on the dial indicator dia..375 Complete with 8 anvils, 1 needle gauge protector Probe depth 2.4 See more bore gauges on Page 5 MSLP SPECIAL Setting and dial Rings solds separately $ $ $81.00 Optional Stand Bore gauge stand for efficient measurement of multiple small holes. Order No M MSLP $1, SPECIAL: $1, *without SPC data output
2 Outside Micrometers SERIES 103 Hammertone, baked-enamel-finished frame Ratchet Stop or Friction Thimble for exact repetitive readings With a standard bar (except for 0-1"/0-25mm models) Gauge Block Set SERIES 516 Inch Rectangular Steel High carbon, high chrome steel with a high degree of hardness A certificate of accuracy, traceable to NIST is included 81 pieces - Grade 0 Order No MSLP $2, SPECIAL $1, $ Outside Micrometer Set SERIES Without Standards Satin-chrome finished frame Ratchet Stop type No standards Complete with storage case Dial Calipers SERIES 505 With Titanium Coating Ultra smooth sliding movement and high shock protection Titanium Nitride (TiN) coating is applied to the sliding surface to increase wear resistance (except 0-12"/0-300mm models) Can measure OD, ID, depth, and steps Clamping screw atop the slider Spring/Summer Flyer Micrometer Set - Inch TiN coating for excellent wear resistance Outside Micrometer - Inch or Metric Order No. Graduation Thimble MSLP SPECIAL 0-25mm mm Friction $ $94.50 $ mm mm Ratchet $ $94.50 $ mm mm Ratchet $ $ $ " " Friction $ $ $ " " Friction $ $ $35.00 Inside Micrometer SERIES 141 Interchangeable Rod Type Interchangeable rods Each rod is marked with its measuring range The sizes of interchangeable rods can be adjusted with spacing collars Both micrometer head and furnished rods are satinchrome finished throughout Inside Micrometer - Inch Order No. Order No. Graduation MSLP SPECIAL Travel of micrometer head Remarks MSLP SPECIAL 2" - 12" " with 5 rods $ $ $ " (3 pcs./set) " $ $ $92.00 Vernier Calipers SERIES 531 With Thumb Clamp Inch/Metric dual scale Can measure OD, ID, depth, and steps The slider moves only when the spindle loaded thumb clamp is depressed High accuracy models Dial Calipers- Inch Order No. Graduation Per Rev. MSLP SPECIAL " $ $ $ " *.001".1" $ $ $ " $ $ $ " $ $ $58.00 *Carbide Jaws for OD & ID Measurement Vernier Calipers - Inch/Metric Scales 0-150mm / 0-6" 0-200mm / 0-8 Order No. Thumb clamp Lower Scale Graduation Upper Scale MSLP SPECIAL mm.001 $ $94.50 $ mm.001 $ $ $
3 Spring/Summer Flyer Back Plunger Type Dial Indicators SERIES 1 Suitable for mounting onto leveling machine tool tables or inspection jigs, and for use in small spaces where the graduations of standard dial gauges are difficult to see Inch - ANSI Standard (3.8 Stem dia.) Total Graduation Order No. per Rev. Dial MSLP SPECIAL $ $ $ $ $ $35.00 Dial Indicator SERIES 2 Metric Standard Type With limit pins and an outer frame clamp The outer clamp and lifting lever (optional) can be attached to either the right or left side Water and oil resistant, scratch resistant High-strength quench-hardened stainless spindle Carbide contact point is used Comparator Stand Stable, cast-iron base and an upright column with a mounting bracket with fine adjustment. The grid type anvil prevents the workpiece from sticking to it. Order No MSLP $ SPECIAL: $ Dial Gauge Stand 3/8 Stem hole with flat anvil (101461) for use with dial or digimatic gauges Order No MSLP $ SPECIAL: $ with ø58mm flat anvil SAVE 49% Series 2 Dial Indicators - Metric Graduation / Rev Dial Order No. (Lug back) 0.01mm 10mm 1mm S Stem Dia. MSLP SPECIAL ø8mm /JIS ABSOLUTE Digimatic Indicators ID-S SERIES 543 Economical Design With Absolute Encoder The ID-S indicates the absolute position of the spindle from the origin point at power-on Measurement error due to spindle overspeed is eliminated with the ABSOLUTE Encoder ANSI/AGD type (3/8 dia. stem) SPC data output SPC Cable MSLP SPECIAL : SPC cable (1m/40 ) $46.30 $ : SPC cable (2m/80 ) $51.00 $45.90 $ $91.80 $ B Magnetic Flexi-Stand Applicable holding stem dia. ø6mm, ø8mm, ø9.53mm (3/8 ) for dial test indicators Order No MSLP $ SPECIAL: $ ABSOLUTE Digimatic Indicator ID-U SERIES 575 with Slim and Simple Design Slim, economical type digital indicator Large LCD and simple key operation Compact design and long battery life ABSOLUTE technology always displays the spindle "Absolute Position" from the origin at power-on. Unlimited response speed eliminates over-speed errors Flat back type only ANSI/AGD type (3/8" dia. stem) SPC data output SPC Cable MSLP SPECIAL : SPC cable (1m/40 ) $46.30 $ : SPC cable (2m/80 ) $51.00 $45.90 ID-S Digimatic Indicators - Inch/Metric Resolution Order No. Remarks MSLP SPECIAL /0.001mm Lug back.5 / $ $ $ /0.001mm B Flat back 12.7mm $ $ $35.00 ID-U Digimatic Indicator - Inch/Metric Resolution Order No. MSLP SPECIAL.0005 /0.01mm 1 / 25.4mm $ $ $
4 Spring/Summer Flyer Dial Test Indicators SERIES 513 Horizontal Type No-clutch structure for automatic reversal of measuring direction Flat crystal face is glare-free with scratch-resistant coating Carbide contact point Steel Rules Series 182 Wide Rigid Rules Clear graduations on satin-chrome finish Stainless tempered Thickness 3/ T E Test Indicators Order No. Graduation Remarks Dial Remarks MSLP SPECIAL 0.2mm E 0.002mm Basic Set $ $ $35.00 Pitch Gauges Thread pitch size is stamped on each gauge Metric, Unified, and Whitworth screw pitch gauges Pitch Gauges Antimagnetic, jeweled 0.2mm T 0.002mm Full Set $ $ $ , 0.7mm T.0005, 0.01mm Full Set $ $ $ Basic Set Antimagnetic, $ $ $ T.0005 Full Set jeweled, long point $ $ $35.00 Order No. No. leaves Type MSLP SPECIAL Wide Rigid Steel Rules Order No. Graduations Width MSLP SPECIAL 6 (4R) /8, 1/16, 1/32, 1/64 3/4 $17.00 $ (16R) /32, 1/64, 1/50, 1/100 3/4 $17.00 $ x 150mm /32, 1/64, 1mm, 0.5mm 3/4 $17.00 $ mm mm, 0.5mm (both faces) 19mm $17.00 $ x 300mm /32, 1/64, 1mm, 0.5mm 1 $35.00 $ (4R) /8, 1/16, 1/32, 1/64 1 $35.00 $31.50 Edge Finders Hardened and ground on all surfaces. Edge Finders Order No. Shank (DIA) Tip (DIA) MSLP SPECIAL mm Metric Screw $36.00 $ mm Pitch (60 o ) $31.00 $ TPI Unified Screw $37.00 $ TPI Pitch (60 o ) $48.00 $ mm / 4-42 TPI leaves: Set of & Thickness Gauges SERIES 950 Each leaf is marked with its thickness Each leaf is detachable if necessary Blade length 3 Thickness Gauges - Inch Metric & Unified Screw Pitch set (60 o ) $71.00 $63.90 Order No. Type of Blade MSLP SPECIAL /8 (.375 ).20 $28.00 $ /2 (.50 ).20 $29.00 $ (26 leaves) (26 leaves) Straight 1/2 width Tapered 1/4 width at tip $30.00 $27.00 $32.00 $28.80 Pocket Steel Rule 6 x 150mm with 1mm, 1/64ths graduations.engraved on front only. Inch/metric equivalents on back. Order No MSLP $11.00 SPECIAL: $9.90 Protractor SERIES Rectangular Base Scale plate and indicator blade are made entirely of stainless steel With 6 arm Protractor Order No. Graduation Remarks MSLP SPECIAL Protractor Graduation: 0 90,90 180, , 90 0 $62.00 $55.80
5 Digital Protractors SERIES 950 Inclination Value Measurements Digital Protractors Order No. /Remarks Resolution MSLP SPECIAL o (90 o x 4) Output N/A 360 o (90 o x 4) RS-232C compatible Digimatic Height Gauges Series 192 Standard or SPC Data Output Type Easy-to-use standard type Carbide-tipped scriber is provided Rigid construction Coarse/fine feed switching Switchable resolution* Two preset reference height Optional touch signal probe can be used with SPC model SPC Cable MSLP SPECIAL : SPC cable (1m/40 ) $46.30 $ : SPC cable (2m/80 ) $51.00 $45.90 Digimatic Height Gauge 0.1 o $ $ o (0 o to 9.99 o ) 0.1 o (10 o to 90 o ) Order No. MSLP SPECIAL 0-18 /0-450mm Standard Model $1, , $ /0-450mm SPC Data Output $1, , $ *Switchable resolution:.0005 (0.01mm) [.0002 (0.005mm)] DP-1VR SERIES 264 Data Collection and Processor Spring/Summer Flyer These Digital Protractors present inclination values on an easy-to-read liquid crystal display. The measurements are generated by an electronic gravity sensor and processed by the latest low-power electronic circuit technology. Alternate reference (zero) Reading hold Simple calibration requiring no special fixtures Display remains upright to view at all angles $ $ Touch Signal Probe Option For use with Order No MSLP $ SPECIAL $ Compact palm-sized unit for printing measurement data from digimatic gauges or to perform statistical analysis Excellent functionality. Use it to print measurement data, perform a variety of statistical analyses, draw a histogram or D chart and also perform complicated operations for X-R control chart GO/NG judgment output as standard functions, this processor ensures high reliability as an advanced quality inspection machine Line thermal printer enables fast and quiet printing Bore Gauges SERIES 511 Carbide-tipped contact points for durability The dial indicator is fully protected by a rugged cover Optional extension rods can be attached for measuring deep holes Bore Gauges - Inch or Metric Order No. Remarks MSLP SPECIAL 35-60mm ø 8mm mm ø 8mm mm ø 8mm.7-1.4" dia..375" 2-6" dia..375" During training, many new employees drop critical measuring equipment within the first day or two, usually condemning them to the trash. In my experience, Mitutoyo measuring tools are the only ones that can take this abuse and still retain their calibration! Joshua Bradshaw, Chief Engineer Rotomaster, Surrey, B.C * * * No Dial Gauge 9 Anvils, 4 Spacers 2109SB-10 Graduation 0.001mm 9 Anvils, 4 Spacers No Dial Gauge 11 Anvils, 4 spacers 2109SB-10 Graduation 0.001mm 13 Anvils, 4 Spacers No Dial Gauge 8 Anvils, 3 Spacers $ $ N/A $ $ $81.00 $ $ N/A $ $ $81.00 $ $ N/A No Dial Gauge * 11 Anvils, + 2" Sub-Anvil, $ $ N/A 4 Spacers *Does not come supplied with Dial Gage Protector Cover ( 21DZA000 ) Order No A MSLP $ SPECIAL $ Optional Accessories MSLP SPECIAL 09EAA084*: RS-232C changing cable (1m,9 pin) $ $ *: GO/±NG judgment cable $ $ T: Foot switch $ $ *RS-232C cable and GO/±NG judgment cable cannot be used at the same time DP-1VR shown with digimatic micrometer, cable and stand (sold separately) 5 5
6 Laser Scan Micrometer LSM-902 / 6900 SERIES 544 Ultra-high Accuracy Non-contact Measuring System LSM-6900 display unit A Specifications LSM-902 Measuring range Resolution Repeatability LSM-902 measuring unit (0.1-25mm) to.0005 ( to 0.01mm) [Selectable] ± 1.9µin (±0.05µm) Linearity Whole range ± 20µin (±0.5µm) Display Small range Spring/Summer Flyer ± ( D) [ D:inch] ±( D)µm [ D:mm] Fluorescent display 16-digit + 11 digit, Guidance LEDs SAVE 19% FEATURES Tolerance judgment (GO/±NG) Abnormal data elimination Automatic workpiece detection Statistical processing Dual program measurement Automatic measurement using edge mode Workpiece position display Transparent object measuring mm/inch changeover Selectable resolution Order No A MSLP $12, SPECIAL $10, Optional Accessories MSLP SPECIAL 02AGD180: gauge set for $ $ LSM-902/ AGD270: Workstage $1, $ AGD280: Adjustable workstage $2, $1, AGD600B: Thermal printer $1, $1, (w/120vac adapter) Digital Readout Packages With ABSOLUTE Digital Readout Linear Scales & KA Counter SAVE WITH OUR PACKAGE DEALS DRO Packages for Lathe Systems AT715 SCALE FEATURES Using Electromagnetic Induction Detection with improved reliability and contamination protection - rated IP67 for dust and water True Absolute scale technology means original part datum point is never lost, even when power is off. KA COUNTER FEATURES Bolt Hole Circle Calculation, Diameter Display and Tool Offsets (Parameter mode), Memory compensation value, Selecting Coordinates 0 to 10, Preset, Zero Approach Machining, Pitch Approach Machining, 1/2 Calculation, Inch/mm Standard Resolution:.001 /.0005 /.0002 /.0001 / (0.01mm/0.005mm/0.002mm/0.0 01mm): When connecting AT /.0010 / /.0004 /.0002 /.0002 (0.020mm/0.010mm/0.004mm/0.002mm) DRO PACKAGES for Lathes* Order No. Travel MSLP Pkg. PKG. SPECIAL D x 30" $1, $1, (Compare - MSLP if ordered separately $1,735.00) D x 40" $1, $1, (Compare - MSLP if ordered separately $1,914.00) D x 52" $1, $1, (Compare - MSLP if ordered separately $2,017.00) Order No. Travel MSLP Pkg. PKG. SPECIAL D x 60" $1, $1, (Compare - MSLP if ordered separately $2,086.00) D x 80" $2, $2, (Compare - MSLP if ordered separately $2,403.00) D x 120" $2, $2, (Compare -MSLP if ordered separately $3,102.00) *DRO Packages include: KA Counter (2-Axis), KA Counter Tray/arm kit, AT715 ABSOLUTE scales (2), Bracket Kit, Extension cable (if scale is over 36 /900mm) 6
7 Spring/Summer Flyer DT-10AS Dial Hardness Tester SERIES 963 Rockwell Hardness Tester FEATURES Economical Rockwell tester, ideal for quick, reliable material testing of a variety of soft or hard metal parts Maximum achievable workpiece height, using a flat anvil of 6.71 /170mm Adjustable dial indicator for easy zero-setting and fast part throughput Manual arm actuator design starts the hardness testing process 60, 100, 150kg loads are included to cover the range of Rockwell scales Full range of optional accessories are available Standard accessories: diamond indenter, flat anvil Ø63, large V-anvil (24 x Ø41), test block 60-65HRC, spirit level, accessory box, vinyl cover FREE Hardness Conversion Poster Optional Accessories MSLP SPECIAL 56AAE431 1/6" dia. steel ball indenter $ $ /16 dia. spare steel ball $ 8.00 $ /8 dia. steel ball indenter $ $ /8 dia. spare steel ball $ $ Round table Ø200mm $ $ V-anvil, Small (5 x Ø20) $ $ Spot anvil (Ø5 x 10) $ $ Test block 90 HRB $ $ Test block 25 HRC $ $ SPECIFICATIONS Model No. DT-10AS Maximum Height With Flat Anvil:4.13 /105mm (with Cover) With Round Table: 6.70 /170mm (no Cover) Distance (C.L.) Indenter for Frame 6.10 /155mm Scale Rockwell A - D - C (Diamond Indenter) F - B - G (1/16 dia. steel ball indenter) * H - E - K (1/8 dia. steel ball indenter) * Rockwell Readout Preload Testing Load Resolution 98.07N (10kgf) N ( kgf) 0.5HR Dial Indicator (Manual zero setting) SAVE 25% Order No MSLP $5, SPECIAL $4, : Included* *Travel related expenses extra Super Caliper - Solar Powered SERIES 500 No battery needed! Solar powered caliper needs no battery Eco-friendly components compatible with RoHS directives ABSOLUTE technology means no need to reset origin. Measurement can be started at power on IP-67 protection assures waterproof reliability Improved display unit impact resistance 0-6 /0-150mm range Resolution.0005 /0.01mm ID-F Digimatic Indicator SERIES 543 Colour changing LCD ABSOLUTE technology - all settings and readings are maintained even if powered off Immune to overspeed errors Red/green LCD indicates GO/±NG Analog bar display with adjustable range and tolerance indicators Multi-function (Preset, max/min hold, TIR function, ± direction, and more SPC digimatic output Selectable resolution (.00002",.00005",.0001",.0005",.001", 0.001mm, 0.01mm) 2" range SPC Cable Accessories MSLP SPECIAL : SPC cable (1m/40 ) $66.80 $ : SPC cable (2m/80 ) $95.00 $85.50 Order No S MSLP $ SPECIAL $ : $35.00 SAVE 34% Order No A MSLP $ SPECIAL $ : $
8 NEW Spring/Summer Flyer Introducing... SJ-210 Surface Roughness Tester Series 178 Portable Surftest The new Surftest SJ-210 combines high accuracy and measurement speed with numerous innovative features, creating a new class leader in surface inspection. FEATURES 2.4 colour graphic LCD with back-lighting for easy viewing Measurement data and conditions can be stored in micro SD card Equipped with USB/IF for mass data transmission Wide selection of optional drive units and detectors available sj-210 SPECIFICATIONS Portable Surface Roughness Tester Feature Display Languages Measuring range Measuring speed Min. /Resolution No. Measurements Input/Output Memory Card (Option) External Printer (Option) NEW SJ " Colour Graphic LCD 16 Languages X =.68"/17.5mm (includes pre/post travel) Z = µin (360µm) 0.01, 0.02, 0.02"/s (0.25, 0.5, 0.75 mm/s) 1000 µin / 0.08 µin (25 µm / µm) 1,000 or more (battery) USB, SPC, RS-232C (Printer output), foot switch, MicroSD (12AAL069-L) MicroSD card ( A) With Roll of 35m Thermal Paper Order No A (4MN) Standard Drive Unit INTRODUCTORY PRICE $2, Cover slides open to access additional function keys SJ-210 Optional Accessories: Order No. Description (Stylus radius) MSLP SPECIAL Standard Detector 4mN (5µm) $ $ Standard Detector 4mN (10µm) $ $ Small Hole Detector 4mN (5µm) $ $ Extra Small Hole Detector 4mN (5µm) $ $ Gear Tooth Detector 4mN (5µm) $1, $1, Deep Groove Detector 4mN (5µm) $ $ AAA233 Height Gauge Adapter (Inch) $ $ Pulldown All detectors also available with.075mn measuring force and 2µm tip radius menu/ Plain menu structure Key-Cover and Key-Lock mode prevents operational errors Cross key operation Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring Sensor Systems Test Equipment and Seismometers Digital Scale and DRO Systems Distributed by: Small Tool Instruments and Data Management 8 I N D U S T R I A L S U P P LY C O M PA N Y LT D Courtneypark Drive, Mississauga, On L5T 2E3 Phone: (905) Toll Free: Fax: (905) Website: Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We, therefore, reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority. Trademarks and Registrations: Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo Canada Inc. is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies should be contacted for more complete trademark and registration information Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice. Mitutoyo Canada Inc. Toronto 2121 Meadowvale Blvd. Mississauga, ON L5N 5N1 Tel. (905) Montreal 7075 Place Robert-Joncas, Suite 129 Montreal, QC H4M 2Z2 Tel. (514) Precision is our profession
Fall Savings! HUGE SAVINGS!
Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationL éditorial. Robert Renaud
L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce
More informationPRECISION TOOL SALE SPRING 2018
PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers
More informationYOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationOPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationLever-Type Dial Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT DIAL TEST INDICATORS. Bulletin No. 2232
Lever-Type Indicators DIAL TEST INDICATORS SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Bulletin No. 2232 Enhanced Durability, Sensitivity and Readability Inspection The QR code is used by the factory to
More informationMITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationLever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035 Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
More information0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
More informationLever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035(2) Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationDigimatic Indicators Pages Dial Indicators Pages Lever Indicators Pages Thickness Gauges Pages
Indicators Digimatic Indicators Pages 246-259 Dial Indicators Pages 260-294 Lever Indicators Pages 295-307 Thickness Gauges Pages 308-312 Indicator Depth Gauges Pages 313-315 Caliper Gauges Pages 316-322
More informationBore Gage. Inside Diameter Measurement. Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Inside Diameter Measurement Bore Gage Bulletin No. 2005 NEW Best-selling range of bore gages now offers better accuracy, user-friendliness and durability Bore
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More information台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
More informationCheck Points. for Measuring Instruments
Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationDIAL SNAP GAUGE. dial indicator is not included W. optional indicators
DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N
More informationDial Indicator. SERIES 2 Standard Type, 0.01mm Resolution
Dial Indicator SERIES 2 Standard Type, 0.01mm Resolution Series 2 dial indicators are Mitutoyo s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having a bezel with
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationTest Indicators. Dial Test Indicators MEASURING TOOLS & INSPECTION INSTRUMENTS. Dial Test Indicators. Long Range Dial Test Indicators. Inch.
Meets DIN2270 or BS2795 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 /2mm diameter ball, supplied with wrench Probe
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More informationDial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
More informationTechnical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationThickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
More informationLever Type Dial Indicators Dial Test Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
Lever Type Indicators Test Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal for readability
More informationCatalog No. E Check Points. for Measuring Instruments
Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding
More informationE905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
More informationPage : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
More information1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
More informationAutoCal Electronic Caliper
2016 REV. 0416 NEW! AutoCal Electronic Caliper Great for Garage and Shop Environments! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great
More informationFred V. Fowler Company Inc. AUTO TOOL CRIB
Fred V. Fowler Company Inc. AUTO TOOL CRIB DISC BRAKE MEASUREMENT VERNIER DISC BRAKE MICROMETER Sharp black graduations on satin chrome finish Range: 0.3" 1.3" Graduation:.0001" Jaw depth: 3.5" Ratchet
More informationt in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until
ts n e l i-ta t l u M ion t c A in + al rigin Swiss tknif e o c ke artner for specialist retailers romotion Brochure Spring 17 In Germany at home in demand worldwide valid until 30.0.17 1 MUL T I -TA L
More informationTHE PRODUCTION COMPARATOR STAND
845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat
More informationOver 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
More informationNEW! AutoCal. Electronic Caliper
2015 REV. 0515 AutoCal Electronic Caliper NEW! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great for garage and shop environments Heavy Duty
More informationClimax Valve Repair Machines
VM7000 VM6000 VM8000 Climax Valve Repair Machines descriptions specifications operational dimensions components CLIMAX Portable Machine Tools, Inc. 6/00 1 Model VM7000 Valve Boring Machine Now you can
More informationCOMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationABSOLUTE Digimatic Indicator ID-C
SERIES 543 Standard Type Resolution:.1mm type.1mm.1mm type*.1mm/.1mm.5 /.1mm type.5 /.1mm.5 /.1mm type*.5 /.1 /.5 /.1mm/.1mm * Switchable resolution Measuring : Refer to the list of specifications 938882
More informationTESATAST Standard Models
TESATAST Standard Models 0110005 0,01 0, 2 0 0,4 0 12,53 0110006 0,01 0, 3 0 0,4 0 12,53 0110007 0,01 0,5 2 0 0,25 0 36,53 011000 0,01 0,5 3 0 0,25 0 36,53 0110009 0,002 0,2 2 0 100 0 12,53 0110010 0,002
More informationPortable Hardness Tester TIME Ultrasonic Contact Impedance (UCI) Method
Portable Hardness Tester TIME5620 -Ultrasonic Contact Impedance (UCI) Method Larger, clear screen displays probe information, battery information, the average, maximum, minimum readings of select hardness
More informationStraightness, Angle and Inclination Measurement
Straightness, Angle and Inclination Measurement Straightness, Angle and Inclination Measurement H-1 Straightness, Angle and Inclination Measurement Levels with Natural Measuring Base Mechanical instruments
More informationMARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
More informationTRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
More informationPrice List. Calibration Fee
3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel. +66 577 5100 (Please contact : Customer Service Section Ext. 3101, 310) Fax. +66 577 3659 E-mail : cs@nimt.or.th Website : http://www.nimt.or.th
More informationISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
More information2D Image Correlation Encoder Page 445
Scale Units and Linear Scales Scale Units Page 417 Linear Scale Page 425 NC-Scales Page 438 2D Image Correlation Encoder Page 445 416 Functions ORIGIN (ABS-Zero) Auto OFF after 20 min. non use Low voltage
More informationAvailable in Carbon Fiber
845-454-3111 800-549-4243 DORSEY LARGE DIAMETER GAGES LDF Series LDVA Series LDA Series LDD Series Ultra Large diameter gage. Measurement range 120" - 132" Weight 10.5lbs/4.76kg Carbon fiber diameter gages
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationR130/R135 TH-170 MANUAL MANUAL. Universal hardness tester. Roughness tester
MANUAL R130/R135 MANUAL TH-170 Roughness tester Universal hardness tester Changes in products and/or product specifications can emerge due to new technologies and continuous development. We reserve the
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationMETROLOGY In Germany at home in demand worldwide.
METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,
More informationDigimar 816 CL. Versatile. User-friendly operation... The measuring program... Precise measuring results...
- 2-8 Digimar 816 CL The new Height Measuring Instrument Digimar 816 CL. You want to obtain highly accurate measurement results without any complicated procedures? With the Digimar 816 CL you have the
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationCrossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
More informationCNC Vertical Machining Centers
CNC Vertical Machining Centers The Best Valued VMC in the Market Today... Take a Minute and Compare Whatever the requirement there is a Storm VMC for Every Application Storm CNC Vertical Machining Centers
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More information+91-8048718949 Bearing & Tools Centre http://www.measuringtestinginstrument.com/ We are a renowned dealer and supplier of a wide assortment of precision engineered testing and measuring equipment. Our
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationTESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
More informationUltra Series: Crossed Roller Ultra Precision Stages
Ultra Series: Crossed Roller Ultra Precision Stages Bayside Motion Group, has developed Ultra Positioning Stages for applications requiring the ultimate in accuracy. Available with a linear motor, ball
More informationQ-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationTyphoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
More informationMarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationGHT Technical description of basic machine
GHT8-2000 Technical description of basic machine GHT 8 1 05-2010 Technical characteristics Capacity Height of centres... 1050 mm Swing over bed...... 2000 mm Swing over cross slide... 1300 mm Max. distance
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationBARON-MAX VB Series Vertical Machining Centers
BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow
More informationBall Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
More informationSCHMIDT ManualPress. From 1.6 kn to 22 kn
SCHMIDT ManualPress From 1.6 kn to 22 kn Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual presses are often the
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationTIMKEN SNT SPLIT PLUMMER BLOCKS
TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationNew. Swiss Promo. Shop Proof Technology. TESA-HITE Magna 400 and TESA-Cal. Validity : All prices with VAT excluded
Validity : 31.07.2007 All prices with VAT excluded Swiss Promo TESA-HITE Magna 400 and 700 2 Shop-Proof Technology protected against water oil dust New Shop Proof Technology TESA-Cal IP67 6 1730 2190 108
More informationMANUAL TH-134 TH-134
MANUAL TH-134 TH-134 CONTENTS 1. INTRODUCTION 2 1.1 IMPACT TH-134 visualized 2 1.2 General description 3 1.3 Typical applications 3 1.4 Technical specification 3 1.5 Table of measuring range versus material
More information0230 / 0231 Workshop calipers with parallax-free reading
0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationCoordinate Measuring Machines. Catalog No. E16010(3) A Production-line Coordinate Measuring System Designed for the Needs of Today
Coordinate Measuring Machines Catalog No. E16010(3) A Production-line Coordinate Measuring System Designed for the Needs of Today Vertical and Flexible MACH-V MACH-V substitutes a flexible measurement
More information