DIAL SNAP GAUGE. dial indicator is not included W. optional indicators
|
|
- Milo McKinney
- 6 years ago
- Views:
Transcription
1 DIAL SNAP GAUGE dial indicator is not included 36 A W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N Carbide measuring faces Front edges of anvils are chamfered for easy workpiece insertion Optional indicators: --dial indicator, range 10mm, graduation (code FA) --digital indicator, range 12.7mm/0.5", resolution 0.001mm/ " (code F) --digital indicator, range 12.7mm/0.5", resolution /0.0005" (code F) FA optional indicators (mm) A B W 0-25mm W 25-50mm W 50-75mm F W mm W mm W mm W mm W mm W mm W mm W W mm mm F G1
2 DIAL SNAP GAUGE dial indicator is not included W optional indicators 33 A W W W W W 0-25mm 0-50mm mm mm mm A (mm) B For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N Carbide measuring faces Optional indicators: --dial indicator, range 10mm, graduation (code FA) --digital indicator, range 12.7mm/0.5", resolution 0.001mm/ " (code F) --digital indicator, range 12.7mm/0.5", resolution /0.0005" (code F) DIAL SNAP GAUGE L D B Ø FA F F (mm) L D 0-25mm mm mm mm Go/No-Go judgement for mass production Dial indicator: range, graduation 0.001mm, accuracy 0.001mm IP54 waterproof Measuring force: 5-10N Carbide measuring faces Supplied with setting standards(except 0-25mm) G2
3 INTERNAL DIAL CALIPER GAUGE L A D (mm) L A D AL AL AL mm 15-35mm 35-55mm 35-55mm 55-75mm 55-75mm 75-95mm mm mm EXTERNAL DIAL CALIPER GAUGE L 6 L(mm) mm mm mm mm mm 55 G3
4 DIGITAL INTERNAL CALIPER GAUGE L (mm) Resolution L A D AL AL AL mm/ " 15-35mm/ " 35-55mm/ " 35-55mm/ " 55-75mm/2.2-3" 55-75mm/2.2-3" 75-95mm/3-3." mm/3.-4.6" mm/ " /0.0005" /0.0005" /0.0005" /0.0005" /0.0005" /0.0005" /0.0005" /0.0005" /0.0005" DIGITAL EXTERNAL CALIPER GAUGE L 6 A D Reading in digit and analog Display can be rotated by 320º Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement CR2032 battery, automatic power off USB data output Optional accessory: SPC cable (page A1-A2) mm/0-0." 20-40mm/0.-1.6" 40-60mm/ " 60-0mm/ " 0-100mm/3.2-4" Resolution /0.0005" /0.0005" /0.0005" /0.0005" /0.0005" L(mm) Reading in digit and analog Display can be rotated by 320º Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement CR2032 battery, automatic power off USB data output Optional accessory: SPC cable (page A1-A2) G4
5 THICKNESS GAUGE type A Ø5 ceramic 125 type B 20 S steel Type A B B THICKNESS GAUGE Ø56 type A ceramic type B S steel Type mm ±0.035mm A B 0-30mm ±0.035mm B G5
6 THICKNESS GAUGE Ø Ceramic spindle tip and anvil DIGITAL THICKNESS GAUGE Ceramic spindle tip and anvil CR2032 battery /0.4" Resolution /0.0005" G6
7 THICKNESS GAUGE Ø B 0-20mm ±0.03mm Type A A B B 0-20mm ±0.03mm B type A ceramic type B S steel PRECISION THICKNESS GAUGE Ø5 16 Ø Stainless steel spindle tip and anvil mm 0.001mm ±0.005mm G7
8 THICKNESS GAUGE Ø mm ±0.05mm Lie-down use for small articles on the table THICKNESS GAUGE 37.5 Ø SØ Made of hard plastic mm ±0.1mm G
9 THICKNESS GAUGE 67 Ø43 Ø Stainless steel spindle tip and anvil THICKNESS GAUGE Ø50 L L1 (mm) L L mm ±0.1mm mm ±0.1mm G9
10 THICKNESS GAUGE Ø mm ±0.1mm THICKNESS GAUGE WITH POINTED TIPS Ø Pointed tips fit into small grooves and recesses mm ±0.1mm G10
11 THICKNESS GAUGE WITH POINTED TIPS 50 Ø Pointed tips fit into small grooves and recesses mm ±0.1mm TUBE THICKNESS GAUGE Ø5 S Measure tube wall thickness A A G11
12 THICKNESS GAUGE WITH ROLLING WHEEL Ø Ø For continuous measurement ±0.025mm SAW SETTING DIAL GAUGE front back saw setting step measurement For saw setting and step measurement Dial on both sides With limit hand mm 0.02mm G12
13 DIGITAL SNAP GAUGE Ø Resolution mm/0-0.5" /0.0005" ±0.03mm DIGITAL SNAP GAUGE 140 Ø14.5 DIGITAL SNAP GAUGE 7 Ø SØ Resolution mm/0-1" /0.0005" ±0.03mm thickness measurement tube wall thickness measurement For thickness and tube wall thickness measurement 200 Thickness range Tube wall thickness range Resolution mm/0-1" 0-2mm/0.0" /0.0005" G13
14 DIGITAL SNAP GAUGE A Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Battery CR2032 USB data output Made of stainless steel Optional accessory: SPC cable (page A1-A2) 50 Ø9 5 Resolution A 0-50mm/0-2" /0.0005" ±0.03mm 140 DIGITAL 3-PURPOSE SNAP GAUGE Ø Buttons: zero, mm/inch, on/off Battery SR44 or LR44 Made of stainless steel mm/0-1" Resolution /0.0005" ±0.03mm G14
15 CRANKSHAFT TESTER Ø 30 Ø40 M6x M6x0.75 M6x0.75 M6x0.75 M6x0.75 M6x0.75 Ø12 Ø12 Ø12 17 Ø Ø dial indicator balance block extension rods Ø Ø Ø anvils To test crankshaft deflection The balance block is mounted on the back of dial indicator to keep the dial indicator facing up Dial indicator range Extension rods mm 3mm 16mm, 32mm, 64mm, 12mm ±0.016mm mm 3mm 16mm, 32mm, 64mm, 96mm, 12mm, 192mm ±0.016mm G15
16 DIGITAL RADIUS GAUGE 10 S 20 S S S S 213 Measure radius of internal and external arcs Supplied with 5 jaws for different sizes of arc Battery CR2032 of radius (R) Resolution (mm) mm/ " /0.001" ±0.01R* *R is the radius to be measured SPHERE RADIUS GAUGE Ø57 Ø Ø20 SØ2.5 SØ Measure radius of sphere H of radius (SR) SR(mm) (mm) mm SR= 50/H + H/2 ±0.01SR(0.02SR+1.1) * SR mm SR= 312.5/H + H/2 ±0.01SR(0.001SR+0.7)* *SR is the radius to be measured G16
Thickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationDigimatic Indicators Pages Dial Indicators Pages Lever Indicators Pages Thickness Gauges Pages
Indicators Digimatic Indicators Pages 246-259 Dial Indicators Pages 260-294 Lever Indicators Pages 295-307 Thickness Gauges Pages 308-312 Indicator Depth Gauges Pages 313-315 Caliper Gauges Pages 316-322
More information台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More information0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
More informationFall Savings! HUGE SAVINGS!
Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More information1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
More informationAutoCal Electronic Caliper
2016 REV. 0416 NEW! AutoCal Electronic Caliper Great for Garage and Shop Environments! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great
More informationNEW! AutoCal. Electronic Caliper
2015 REV. 0515 AutoCal Electronic Caliper NEW! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great for garage and shop environments Heavy Duty
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationCheck Points. for Measuring Instruments
Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring
More informationDIGITAL HEIGHT GAUGE. clamp
DIGIT HEIGHT GUGE lamp 55 40 6 Ø8 for 10-0 65 50 10 Ø8 for 10-500/600 0 55 10 Ø8 for 10-0 10-500 10-0 Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inh, BS/INC, ata hol, TO, set BS/INC is for asolute
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationPrecision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown.
SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES
More informationOPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software
More informationMARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
More informationMETROLOGY In Germany at home in demand worldwide.
METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,
More informationRev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationTechnical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More informationYOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationDial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
More information82L Series. Pneumatic Power Clamps Ordering Information 03 B8 H 82L 2G B PC-PPC-15. Base Model Size Description 2G 3G 3N 4G 4N
82L..-2... Series Pneumatic Power Clamps Ordering Information 82L 2G B -2 3 B8 H Base Size Description Arm Style Description 2G 3G 3N 4G 4N Ø25 (G1/8) Cylinder Bore Size Ø32 (G1/8) Cylinder Bore Size Ø32
More informationt in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until
ts n e l i-ta t l u M ion t c A in + al rigin Swiss tknif e o c ke artner for specialist retailers romotion Brochure Spring 17 In Germany at home in demand worldwide valid until 30.0.17 1 MUL T I -TA L
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationOver 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More informationABSOLUTE Digimatic Indicator ID-C
SERIES 543 Standard Type Resolution:.1mm type.1mm.1mm type*.1mm/.1mm.5 /.1mm type.5 /.1mm.5 /.1mm type*.5 /.1 /.5 /.1mm/.1mm * Switchable resolution Measuring : Refer to the list of specifications 938882
More informationHistory of Dorsey. Theodore Francis Luty. Ted Luty Jr., C.E.O Devon Luty, President. Dorsey Metrology International Website:
History of Dorsey Theodore Francis Luty In 1955 Dorsey Gage Company was incorporated in New York State by its founders, Theodore F. Luty Sr. and his wife Helen Luty. The company began in Hyde Park, New
More informationE905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
More informationMagnescale Co., Ltd. High Rigidity High Operability = Tough Sensor. Magnescale Co., Ltd.
Magnescale Co., Ltd. International Sales Department 3-1-4 Edagawa, Koto-ku, Tokyo 135-51, Japan Magnescale Americas Inc. 1 Technology Drive, Suite F7, Irvine, CA 9218, USA Magnescale Europe GmbH Antoniusstrasse
More informationFred V. Fowler Company Inc. AUTO TOOL CRIB
Fred V. Fowler Company Inc. AUTO TOOL CRIB DISC BRAKE MEASUREMENT VERNIER DISC BRAKE MICROMETER Sharp black graduations on satin chrome finish Range: 0.3" 1.3" Graduation:.0001" Jaw depth: 3.5" Ratchet
More informationMITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationActuator LD3. Product Data Sheet Feature
Product Data Sheet www.moteck.com Actuator LD LD features its compact design, which is suitable for various applications that require limited installation space, such as window opener and adjustable car
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More information140,- 329,- 210,- 329,- 739,- 509,- 350,- 126,- 117,- 126,- 434,- 217,- 488,- 586,- 524,-
AUGUS - OCOBER 07 AUGUS - OCOBER 07 RADIO CONROLLED WALL CLOCK Q O UA Available in Ø0 og Ø0 cm. AA battery operated. P Ø0 cm LI Y 9,- 0 Ø0 cm 09,- 0 DIGIAL INDICAOR DIAL INDICAOR + MAGNEIC SAND Base: 6
More informationISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
More informationCatalog No. E Check Points. for Measuring Instruments
Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding
More informationPRECISION TOOL SALE SPRING 2018
PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers
More informationL éditorial. Robert Renaud
L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationPin Packages Section.Page. Series. Dimensions and technical information are subject to change without notice. Air Consumption at 5 bar [dm3]
Pin Packages 6. Pushing Force (N) at 5 bar Retracting Force at 5 bar Piston Diameter Weight Air Consumption at 5 bar [dm3] Application Area Series Section.Page 0 to 500 [N] 500 to 000 [N] 000 to 500 [N]
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationTel
30 20 10 60 0 60 H B g ed e A H1 A1 VSC-5A SUIT FOR BS-0 OR HV-6, VUT-6, VU-150 VSC-6A SUIT FOR BS-1 OR HV-8, 10, VUT-6, VU-200 VSC-7A, 8A SUIT FOR BS-2 OR HV-10, 12, 14, VUT-10, 12 VSC-10A SUIT FOR HV-14,
More informationLever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035 Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationPrecision Measuring Tools and Test Instruments EDITION
Precision Measuring Tools and Test Instruments EDITIO 2015/2016 info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 3 4 5 6 8 9 10 11 In our catalogue you will find several pictograms beside the
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More information86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information
86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the
More informationLever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035(2) Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
More informationUniversal Cutter Grinder ORDER NO.U2 CODE NO
Universal Cutter Grinder ORDER NO.U2 CODE NO.1022-001 For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative
More information2. The engine must be in racing conditions, no combustion chamber cleaning allowed
IAME INTERNATIONAL SERIES 2018 APPENDIX 12 General method for measuring the squish height on a L-ring piston. 1. Remove the engine from the chassis 2. The engine must be in racing conditions, no combustion
More informationBore Gage. Inside Diameter Measurement. Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Inside Diameter Measurement Bore Gage Bulletin No. 2005 NEW Best-selling range of bore gages now offers better accuracy, user-friendliness and durability Bore
More informationCHAPTER 26 - GENERIC COMPLIANCE CHECKS
CHAPTER 26 - GENERIC COMPLIANCE CHECKS 26.01 Cylinder Head Volume Measurement: The measuring fluid will be a solution of 50% diesel and 50% auto transmission fluid. To be measured by use of 'B' Grade Burette
More informationExplanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process
info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 4 5 6 8 9 10 11 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier
More informationSR1V. Industrial Low Cost String Pot
SR1V Industrial Low Cost String Pot User Scalable VDC Output Signal Linear Position Measurement up to 125 inches (3 meters) Designed for Outdoor / Wet environments In-Stock! SR1V is a rugged, low-cost,
More informationActuator ID10. Product Data Sheet Feature
Product Data Sheet www.moteck.com Actuator ID1 ID1 features its heavy load capability and high speed design, which is suitable for various industrial applications requiring quick movement, such as agricultural
More information0230 / 0231 Workshop calipers with parallax-free reading
0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationJTC TOOL. 3Thickness Gauge. Thickness of paper, small parts and film can be measured only by holding them.
Thickness Gauge Thickness of paper, small parts and film can be measured only by holding them. Dial Indicator is used by being fitted to jig etc., while thickness gauge is held with our hand. Holding work
More informationExplanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process
info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 3 4 5 6 7 8 9 10 11 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier
More informationSPV CMV-R MMV CMV-S PCV APV PSV PLV DDV MDV 222P 234P 236P 223P 224P 238P 226P 240P 228P 230P 232P 233P. Flexible Vise. Serration type.
VISE SPV Serration type Power 222P FV Flexible 234P CMV-R Self centering 5-Axis 223P VS Standard Machine 236P CMV-S Self centering 5-Axis 224P MMV Mechanical Machine Quick 238P PCV Standard Power 226P
More informationQ-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More information124
124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More informationQuality Control for Poultrymen
Quality Control for Poultrymen Product Brief Egg Shell Thickness Measure Model 25-5 Eggs with shells that are too thin to stand up under normal handling conditions cost poultrymen thousands of dollars
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationVDO cockpit vision / international
VDO cockpit vision / international Instruments www.siemensvdo.com TU00-0755-0000002 I 0607 I Technical details subject to change Contents Page 14 1 General informations 14-2 14 2 Technical data 14-3 14
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationTRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationLever-Type Dial Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT DIAL TEST INDICATORS. Bulletin No. 2232
Lever-Type Indicators DIAL TEST INDICATORS SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Bulletin No. 2232 Enhanced Durability, Sensitivity and Readability Inspection The QR code is used by the factory to
More informationSUBITO -Precision Bore Measuring Instrument
Precision Bore Measuring Instrument for measuring internal diameters, application 4,5 00 mm SU/SK/SW SERIES 1 ANDARD VERSION SERIES SU w. inspection certificate Delivery: Holder, fixed measuring pins,
More informationMEASURING & LEVELING TOOLS
Calipers & Dividers...398, 399 Contour Markers...407, 408 Derrick Tape Refills...419 Derrick Tapes...419 Dial & Digital Indicators...422 Feeler & Pitch Gauge Sets...401 Finders & Scanners...400 Flange
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationTESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
More informationIngress protection: IP 40 / DIN EN Can be upgraded to IP 54 if ELP is used with EL... DI. IP 54 protection for ELPH... on request.
BOS-Ecoline BOS-Ecoline combines the advantages of aluminium profiles with the optimal cost effectiveness of plastic caps to create a superior enclosure concept. Different sizes and profile types permit
More informationLINEAR MOTION SYSTEM COMPONENTS
R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationAutocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors MH-Series Mobile Hydraulic in-cylinder Sensor Model MH Analog Output Data Sheet SENSORS Document Part Number 550824 Revision
More informationTest Indicators. Dial Test Indicators MEASURING TOOLS & INSPECTION INSTRUMENTS. Dial Test Indicators. Long Range Dial Test Indicators. Inch.
Meets DIN2270 or BS2795 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 /2mm diameter ball, supplied with wrench Probe
More informationTop quality Plug & weigh
FORKLIFT TRUCK SCALES iforks Completely wireless fork scale BENEFITS 5 Minutes installation Completely wireless: no cabling Digital calibration Weight correction for forklift mast tilt No de-rating of
More information