Fall Savings! HUGE SAVINGS!

Size: px

Start display at page:

Download "Fall Savings! HUGE SAVINGS!"

Brenda Gallagher
5 years ago
Views:

Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability.

963-240-10A Without Trade In With Trade In $9,735.58 $8,450.00 HR-430MS Order No. 963-241-10A Without Trade In With Trade In $10,817.31 $9,700.

1 Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without Trade In 26% With Trade In HR-32OMS Order No A Without Trade In With Trade In $9, $8, HUGE SAVINGS! HR-430MR Order No A Without Trade In With Trade In $9, $8, HR-430MS Order No A Without Trade In With Trade In $10, $9, FOB MISSISSAUGA FOB MISSISSAUGA FOB MISSISSAUGA The frame design allows the full 7.1 of specimen capacity without the need to cut a hole in the table. *HR320 uses a flashing bar graph to indicate when the initial test force has been reached The frame design allows the full 7.1 of specimen capacity without the need to cut a hole in the table. *HR430 has an automatic brake and automatic start function that prevent overloading and begins test cycle The frame design allows the full 7.1 of specimen capacity without the need to cut a hole in the table. All models are complete with Flat and V-anvil, dimond and 1/16 carbide ball indenters

DEPTH MICROMETER Ø4mm interchangeable rods, with lapped measuring end, provides a wide measuring range With ratchet stop for constant force With

handheld measurement *Without SPC data 293-348-30 * 293-336-30 comes with standard bar and a certification of inspection is included Base size $

00 Digital model with carbon tip Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other

15 degree measurement point Non-slip grip finish With ratchet stop for constant force Supplied in fitted case $ 293-348-30 0-1 /0-25.

94 Provided only with zero set and in/mm models only keys.

2 DEPTH MICROMETER Ø4mm interchangeable rods, with lapped measuring end, provides a wide measuring range With ratchet stop for constant force With measuring rod clamp DIGIMATIC MICROMETERS A nonslip surface with raised dots is employed for the frame cover and surface panel to achieve stable handheld measurement *Without SPC data * comes with standard bar and a certification of inspection is included Base size $ / mm 4 x $ $ Digital model with carbon tip Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions. 15 degree measurement point Non-slip grip finish With ratchet stop for constant force Supplied in fitted case $ /0-25.4mm $ /0-25.4mm / $ mm / mm $ Provided only with zero set and in/mm models only keys. A ratchet stop or friction thimble for a constant measuring force Measurement readout with large characters on the LCD Supplied in fitted case $ /0-25.4mm /0.001mm $ The input tool allows you to connect any Mitutoyo gauge, with SPC output, directly to your PC INPUT TOOL, USB $ /0-25.4mm $ /0.001mm /0-25.4mm $ PC Requirements PC Compatability (including laptops) with USB 2.0 OR 1.1 port $ $184.76

Satin chrome-finished frame, tapered (on the anvil side) for hard to reach places MECHANICAL MICROMETERS Hammerstone,

With ratchet stop for constant force With standard bar except 0-1 model Set 103-929 0-3 103-177,103-178,103-179 35343 $354.

0001 reading $ Remark $ 122-125 0-1 35433 $257.45.0001 Type A 122-126 1-2 35434 $265.75 $ 193-211 * 35740 $158.26 0-1.

93 Used for the zero point setting of outside micrometers Flat and lapped measuring faces Heat insulating handles to prevent

3 Satin chrome-finished frame, tapered (on the anvil side) for hard to reach places MECHANICAL MICROMETERS Hammerstone, baked-enamel-finished frame Ratchet stop or friction thimble for exact repetitive readings With Standard bar $ $ The anvil and the spindle have a blade for measuring groove diameter of shafts, keyways and hard-to-reach-areas. With ratchet stop for constant force With standard bar except 0-1 model Set , , $ $ Mechanical digit counter for quick and error-free reading. *Both vernier micrometers can obtaine a.0001 reading $ Remark $ $ Type A $ $ * $ * $ Used for the zero point setting of outside micrometers Flat and lapped measuring faces Heat insulating handles to prevent expansion due to body temperature Supplied in fitted carton STANDARD MICROMETER S-F: Spherical anvil and flat spindle Designed to measure the wall thickness of various tubing With digit counter * is for the Indicator only Length Diameter (D) $ $ $19.63 $ $23.40 Remark $ (D) $195.54

DIAL STANDARD Unique shock-proof mechanism provides improved immunity to shock due to sudden spindle retraction caused by high impact The crystal is hard coated for durability and scratch resistence

will not be hindered or jammed when clamping along the stem.

and outside diameters that dial indicators cannot access.

jeweled bearings Standard carbide contact point provided * 513-414-10E double scale spacing and long contact point type Dial 2776S 1.0005 0-50 113881 $113.04 2904S 1.001 100-0 140654 $112.

2mm 0.001mm 80-0-80 2901SB-10 + $164.58 Dial * is for the Indicator only Dial 513-401-10E 0.14mm 0.001mm 0-70-0 513-401-10E + $200.07 513-402-10E.03.0005 0-15-0 304881 $107.58 513-404-10T 0.

4 DIAL STANDARD Unique shock-proof mechanism provides improved immunity to shock due to sudden spindle retraction caused by high impact The crystal is hard coated for durability and scratch resistence Approximately 40% lighter than a conventional dial indicator Improved resistance to shop-floor contaminants such as water and dust Due to spindle bushing being offset from the stem, spindle movement will not be hindered or jammed when clamping along the stem. * Shockproof and jeweled bearing type 2803SB-10 & 2923S-10 * Reverse reading type 2904S & 2923S-10 DIAL TEST INDICATORS Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access. No-clutch structure for automatic reversal of measurement direction One-piece bezel and crystal design with O-ring provides resistance to water and dust High sensitivity and quick response because of jeweled bearings Standard carbide contact point provided * E double scale spacing and long contact point type Dial 2776S $ S $ SB-10 * $ S $ DIAL STANDARD Standard one revolution type for errorfree reading *Shockproof and jeweled bearing type. 2901SB mm/0.2mm 0.001mm SB-10 + $ Dial * is for the Indicator only Dial E 0.14mm 0.001mm E + $ E $ T 0.8mm T + $ mm E 0.5mm $ Horizontal, vertical and parallel series Anti magnetic and jeweled bearing type * T long contact point type Includes dial test indicator and mini magentic stand (inch model) *Dial test indicator is antimagnetic and jewled bearing type Set E * , 7014E-10 Remarks Without magnetic on/off $ * is for the Indicator only Dial T 0.4mm 0.002mm T + $ T $200.82

DIAL COMPACT With lug back *Shockproof and Jewledge bearing type only with 1109SB-10 Dial 1109SB-10 1mm

62 DIGIMATIC INDICATORS Similar in size to Series 2 dial indicators Large, easy to read LCD Go/no-go

resulting from the spindle s up/down movement can be toggled.

Finders are hardened and ground on all surfaces 543-392.00005 /0.001mm 123542 $397.59.5 /12.

a thumb trigger and spring loaded spindle Fine dial reading, ceramic spindle/anvil Tip A simple, small

5 DIAL COMPACT With lug back *Shockproof and Jewledge bearing type only with 1109SB-10 Dial 1109SB-10 1mm 0.001mm SB-10 + $ S $93.62 DIGIMATIC INDICATORS Similar in size to Series 2 dial indicators Large, easy to read LCD Go/no-go judgement can be performed by setting upper and lower tolerance limits The positive/negative count resulting from the spindle s up/down movement can be toggled. ID-C indicator face can be rotated 330 to an appropriate angle for easy reading EDGE FINDER The Edge Finders are hardened and ground on all surfaces /0.001mm $ /12.7mm B.0005 /0.01mm $ Shank Diameter $ /2 (.50 ) , $15.10 Thickness gauges offer a quick and efficient means of inspection with a convenient grip handle With a thumb trigger and spring loaded spindle Fine dial reading, ceramic spindle/anvil Tip A simple, small magnification device used to see small details more closely Contained in an opaque cylinder or cone or fold into an enclosing housing that protects the lenses when not in use. Magnification Remarks CLEAR LOUPE X Drawtube Removable $ S $ $51.00

DIGIMATIC ENCODER TECHNOLOGY CALIPER Electronic calipers, keeps track of origin point once it is set Large and clear

09 500-175-30 0-6 /150mm 500-175-30 + $338.98 0.05mm/1/128 500-505-10 0-18 /0-450mm 120377 $742.

Lock screw for holding the sliding jaw position Suppled in vinyl holster in fitted carton * Dual reading scales and

00 The slider moves only when the spring loaded thumb clamp is depressed Can measure OD, ID, depth and steps Supplied

74 531-128 0-150mm/0-6 36242 $87.58 0.02mm/.001 531-129 0-200mm/0-8 36243 $103.43 $51.00 530-116 0-8 36234 $112.

47 CARBON FIBER DIGIMATIC CALIPER Lightweight Highly durable and easy to handle The range of application can be

6 DIGIMATIC ENCODER TECHNOLOGY CALIPER Electronic calipers, keeps track of origin point once it is set Large and clear LCD Readout Carbide-tipped jaw-type * without thumbroller /0-150mm $ /150mm $ mm/1/ /0-450mm $ MECHANICAL VERNIER Measures OD, ID depth, and steps. Lock screw for holding the sliding jaw position Suppled in vinyl holster in fitted carton * Dual reading scales and graduation of 0.02mm $89.00 The slider moves only when the spring loaded thumb clamp is depressed Can measure OD, ID, depth and steps Supplied in vinyl holster in fitted carton mm/ $ mm/1/ $ mm/ $ mm/ mm/ $ $ $ mm/ mm/ $ CARBON FIBER DIGIMATIC CALIPER Lightweight Highly durable and easy to handle The range of application can be expanded by using the optional attachements Direct readout of ID measurements from the LCD $ (.5 ) /0.01mm $ $ DIGIMATIC SOLAR CALIPER A measurement can be started at any time and without restrictions on operating speed. Eco-friendly solar-powered caliper requires no battery Supplied in a fitted case *without SPC data output /0-200mm.0005 /0.01mm $277.08

BORE GAUGES Carbide-contact points for durability Optional extension rods can be attached for measuring deep holes *

Carbide-contact point ensures high durability and wear resistance Grip is large and hollow to reduce effect of body heat

31 PITCH GAUGE SET Thread pitch size is stamped on each gauge Metric, Unified, and Whitworth screw pitch gauge 188-111

4-7mm/4-42 TPI 51 35704 $56.91 LINEAR GAUGE COUNTER Compact panel mounting type and DIN size.

4 sub anvils 305079 $505.83.0001 $89.00 511-440 2-6 11.2 sub anvils 511-440 + $548.

Flatness, parallelism and surface finish necessary to achieve the required accuracies are the same as or better than

7 BORE GAUGES Carbide-contact points for durability Optional extension rods can be attached for measuring deep holes * Indicator sold seperately, contact us for recommendation Measure ID at position close to the bottom of blind hole Carbide-contact point ensures high durability and wear resistance Grip is large and hollow to reduce effect of body heat on highaccuracy measurements $ PITCH GAUGE SET Thread pitch size is stamped on each gauge Metric, Unified, and Whitworth screw pitch gauge TPI $ mm $ mm $ mm/4-42 TPI $56.91 LINEAR GAUGE COUNTER Compact panel mounting type and DIN size. Can be easily incorporated into each system No.of Anvils Leaves Per Set No.of Anvils sub anvils $ $ sub anvils $ GAUGE BLOCKS All Mitutoyo gauge blocks meet or exceed all know specifications. Flatness, parallelism and surface finish necessary to achieve the required accuracies are the same as or better than government requirements Block Per Set Grade $1, $ STANDARD GAUGES Made of high quality steel Satin chrome finish Application Input A LGD, LGS, ID,SD, Digimatic code (SPD) $ Specification American Standard Wire Gauge $ US Standard Wire Gauge $35.48

STEEL RULERS FLEXIBLE WIDE Clear graduation on stain-chrome finish Stainless tempered Size 182-208 6 x150mm 1/10,1/50,1mm,0mm 35618

00 DIGITAL PROTRACTORS Machined aluminum frame Alternate reference (zero) Reading hold Simple calibration requiring no special

model SEMI-FLEXIBLE Engraved on frontside only Size 182-302 6 x150mm 1/2mm,1mm,1/32,1/64,1/16 35640 $15.85 $51.

00 DIGIMATIC HEIGHT GAUGE Switchable resolution and easy-to-use standard type Carbide-tipped scriber is provided Double-column

30 360 (90 x4) 360 (90 x4) 950-318 0.01 (0 to 9.99 ) / 0.

8 STEEL RULERS FLEXIBLE WIDE Clear graduation on stain-chrome finish Stainless tempered Size x150mm 1/10,1/50,1mm,0mm $ mm 1mm,0.5mm,1mm,0.5mm $19.63 FALL SAVINGS $51.00 DIGITAL PROTRACTORS Machined aluminum frame Alternate reference (zero) Reading hold Simple calibration requiring no special fixtures Supplied in fitted case Display remains upright to view at all angles * Pro 360 model RS232C output * Pro 3600 model SEMI-FLEXIBLE Engraved on frontside only Size x150mm 1/2mm,1mm,1/32,1/64,1/ $15.85 $ x300mm 1/2mm,1mm,1/32,1/64,1/ $32.46 $ DIGIMATIC HEIGHT GAUGE Switchable resolution and easy-to-use standard type Carbide-tipped scriber is provided Double-column structure ensures high measuring accuracy Coarse/fine feed switching Two preset reference heights $ (90 x4) 360 (90 x4) (0 to 9.99 ) / 0.1 (10 to 90 ) UNIVERSAL PROTRACTOR Data output function makes it easy to use the statistical data. Can be attached to height gauges. Setting preset value Blade POCKET Engraved on both sides $ (0.01 ) $1, /0-300mm.0005 (0.01mm) [.0002 (0.005mm)] Switchable $1, $ Size x150mm 1mm, 1/ $9.36 $51.00

Minimum Purchase One AT715 Linear Scale & One KA-200 Counter (2or 3 axis) Effective BUILD YOUR OWN DIGITAL READOUT PACKAGE Code 539-801 4 /100mm 194775 $303.63 $288.45 539-802 6 /150mm 210609 $303.

9 Minimum Purchase One AT715 Linear Scale & One KA-200 Counter (2or 3 axis) Effective BUILD YOUR OWN DIGITAL READOUT PACKAGE Code /100mm $ $ /150mm $ $ /200mm $ $ /250mm $ $ /300mm $ $ /350mm $ $ /400mm $ $ /450mm $ $ /500mm $ $ /600mm $ $ A KA-200 Counter (2-axis) $ $ A KA-200 Counter (3-axis) $ $ your choice Description 1pc. Linerar Scale Withought With Minumum Purchase Minumum Purchase Withought With Minumum Purchase Minumum Purchase 25% KA-200 Digital Counter > Excellent addition to manual machine retrofit packages > Many high end functions packed into this standard counter > Large LED display is sharp and bright. Easy to see at a distance > The positive touch front panel keys are solid and easy to push with fast response > The sub display lets you know what function you are currently using with minimum on most items* /700mm $ $ /750mm $ $ /800mm $ $ /900mm $ $ /1000mm $ $ /1100mm $ $ /1200mm $ $ /1300mm $ $ /1400mm $ $ /1500mm $ $ % with minimum on most items* /1600mm $ $ /1700mm $ $ /1800mm $ $ /2000mm $1, $1, /2200mm $1, $1, /2400mm $1, $1, Brackets Description 64AAB196 Universal bracket kit (12 ) $ AAB197 Universal bracket kit (14-16 ) $ Milling System 64AAB198 System Universal bracket kit 64AAB198 + $ AAB199 Screw kit 64AAB199 + $ /2500mm $1, $1, /2600mm $1, $1, /2800mm $1, $1, /3000mm $2, $2, AAB191 Lathes Bracket kit $ AAB194 Grinders Scale Y axis 64AAB194 + $ AAB200 All Systems Machine arm kit (KA Counter $185.46

The portable solution for precise, effective and uncomplicated surface testing in the production environment High-resolution detector with broad measuring range Removeable traverse unit for

7 colour LCD 10 different measurement conditions can be stored internally, up to 500 with optional SD card SURFTEST SJ-310 Order No. 178-571-02A A.C.T. No. 268976 FLYER SPECIAL $3,948.

86 Size Height SURFTEST SJ-411 Order No. 178-581-02A A.C.T. No. 274984 FLYER SPECIAL $7,376.

with certification of accuracy Weight (lbs) OPTIONAL ACCESSORY PROMO AUTO-SET UNIT FOR 178-039 Order No. 178-010 A.C.T. No. 178-010 + $3,515.

02 517-802 12 x 12 3 50 100 µin 126973 $177.26 517-803 12 x 18 4 100 100 µin 109629 $226.74 517-805 18 x 24 4 200 130 µin A Inspection 166780 $442.40 517-808 24 x 36 5 500 170 µin 127257 $841.

10 The portable solution for precise, effective and uncomplicated surface testing in the production environment High-resolution detector with broad measuring range Removeable traverse unit for measurements where space is restricted Standard USB, RS232C. SPC interfaces SURFTEST SJ-210 Order No A A.C.T. No FLYER SPECIAL $2, % on most items 5.7 colour LCD 10 different measurement conditions can be stored internally, up to 500 with optional SD card SURFTEST SJ-310 Order No A A.C.T. No FLYER SPECIAL $3, SURFTEST SERIES 5.7 colour LCD Analysis of primary profile, roughness profile, filtered waviness *Contact us for calibration pricing SJ-400 COLUMN STAND Order No A.C.T. No $ Size Height SURFTEST SJ-411 Order No A A.C.T. No FLYER SPECIAL $7, Natural granite - free from dimensional change Superior to cast iron plates Free from wringing, burrs or protrusions High degree of flatness for longevity Meets & exceeds GGG-P-463c Each shipped with certification of accuracy Weight (lbs) OPTIONAL ACCESSORY PROMO AUTO-SET UNIT FOR Order No A.C.T. No $3, Accuracy Grade $ x µin AA $1, x µin Labroratory $2, x µin $ x µin $ x µin $ x µin A Inspection $ x µin $ x µin $1, x µin $4, Top quality ceramic axis Measuring head can swivle 90 for transverse measurement Analysis of primary profile, roughness profile, filtered waviness and geometric characteristics SURFTEST SJ-500 Order No A A.C.T. No A + FLYER SPECIAL $12, Steel stands support black granite surface plates at working level GRANITE SURFACE PLATES & STANDS Size Specification $ x18 Stationary $1, x 18 With Caster $1, x 24 Stationary $1, x 24 With Caster $1, x 36 Stationary $1, x36 With Caster $1, x 48 Stationary $1, x 48 With Caster $1, x 72 Stationary $1, x 72 With Caster $2,296.17

11 Valid: October 2nd to December 22nd CIAL PE ER S E PRI8C8.95 $ 2,5 SUP $2,588.95

12 View We reserve the right to change prices and specifications without notice. ny other offer or promotion. This promotion is for Canadian market only. Request formal quotation for complete details.

PRECISION TOOL SALE SPRING 2018

PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers