Pipe, Weld, and Adapter Fittings

Transcription

1 ipe, Weld, and dapter Fittings & 10K Instrumentation Fittings 1/16 to 2 in. sizes NT, B, and threads Tube and ipe ocket and Butt Weld, lloy 400, lloy C-276, carbon steel, and brass N 37 Flared

2 t, we are proud to be an merican manufacturing success story. 100% of our products are made in merica. ll of our manufacturing is performed in our 165,000 sq. ft. facility located near Cleveland, Ohio. Our facility is the largest vertically integrated, single-site operation in the industry. In addition to manufacturing and assembly, we have closed die forging, tool & die design, product engineering and testing operations under the same roof with customer service and management. Made in merica is good business. Not only do we make everything in merica, we use merican suppliers too. Buying merican allows us to have better quality control and a more reliable supply chain. We can work more closely within our walls and with our suppliers to improve quality, reduce costs, and shorten lead times, which means faster service and better products for you. upport where it counts. products and services are supported by more than 4000 people and 350 distributor locations around the globe. For a distributor near you, contact Customer ervice or visit Industry tandard roducts. Made Better.

3 TB of CONTNT Introduction... 3 Technical Information... 4 afety... 6 ow to Order... 8 election Guide... 9 NT Fittings Fittings & dapters Weld Fittings and dapters N Flared Fittings & dapters...33 IO / B Fittings & dapters...37 Instrumentation ipe Fittings ipe, Weld & dapter Fittings has been manufacturing pipe fittings for more than 75 years. instrumentation pipe fittings are manufactured with high-quality NT, B, and threads, N 37 flared, and tube and pipe weld ends. traight, elbow, tee and cross fittings can be configured with end connections from 1/16 to 2 in. pipe fittings are available in 316 stainless steel, lloy 400, lloy C-276 and brass. Other alloys are available on request K Fittings also offers 10K fittings. ach fitting has a pressure rating of at least 10,000 psig (689 bar). They are available in 316 stainless steel in sizes from 1/16 to 1 in. NT with B, and N end connections. roduct Design Male threads are capped for protection Clear identification enable material heat and lot traceability. Burr-free internal surfaces mooth thread flanks promote sealing and minimize galling. Tightly controlled metal chemistry for increased strength and corrosion resistance. recision forging supports accurate pipe layouts. NT threads conform to M and

4 Technical Information ipe and Weld Fitting pplications arameter Tapered traight Weld nds ressures (M 31.1) igh to 10,000 psi tatic systems only igh to 10,000 psi Dynamic and tatic Very igh to psig tatic and Dynamic tainless: -425 to 1200 F Nitrile: -30 to 250 F Temperatures : -40 to 400 F FKM: -15 to 400 F tainless: -425 to 1200 F lloy 400: -65 to 800 F Copper: -315 to 400 Vibration Resistance Fair Very Good xcellent izes 1/16 to 2 in. #4 to #32 1/8 to 2 in. Dynamic Temperature/ressure Good in static systems oor in dynamic systems xcellent in static systems. Very good in dynamic systems xcellent. ermanent joints. ighly resistant to vibration asy of Maintenance imited breaks and remakes due to metal deformation of threads Very good. Virtually unlimited remakes. O-ring replacement only ermanently assembled 10K pplication Information arameter Tapered traight ressures (M 31.1) 10,000 psi minimum tatic systems only 10,000 psi minimum Dynamic and tatic ystems Temperature Range tainless: -425 to 1200 F Nitrile: -30 to 250 F FKM: -15 to 400 F Vibration Resistance Fair Very Good ize availability 1/8 to 1 in #4 - #16 Dynamic Temperature/ressure Maintenance Good in static systems oor in dynamic systems imited breaks and remakes due to metal deformation of threads xcellent in static systems. Very good in dynamic systems Very good. Virtually unlimited remakes. O-ring replacement only tandards Type Designator tandard NT (Tapered) _ M B IO/B (parallel) (Based on DIN 3852) IO/B (tapered) (Based on DIN 3852) R RT IO 228, JI B0202 IO 7, B N , JI B0203 Unified () T M B1.1 Material tandards Material Bar Forging TM 276, M 479, N TM 182, M 182, N lloy 400 TM B164 TM B564, M B564 lloy C-276 TM B574 TM B564 TM B16, TM B453 TM B283 Carbon teel TM 108 lloy 20 TM B473 TM B462 lloy 600 TM B166, M B166 TM B564, M B564 lloy 625 TM B446 TM B564, M B564 lloy 825 TM B425 TM B564, M B564 04

5 ressure - Temperature Ratings Tables 1 contains typical pressure ratings for male and female NT and B tapered pipe thread ends at ambient temperature. Table 2 provides pressure ratings for and B straight pipe thread ends. Table 4 contains derating factors for determining pressure ratings for tapered fittings at higher temperatures. Table 5 lists temperature ranges for FKM and nitrile O-ring sealed ends. For more more information about pressure ratings, contact customer service. NT/IO ipe ize ize Table 1, NT/BT ipe nd ressure Ratings, NI/M B 31.3 Carbon teel Male Male Male psig bar psig bar psig bar psig bar psig bar psig bar 1/16" 1 11, , , , , , /8" 2 10, , , , , , /4" 4 8, , , , , , /8" 6 7, , , , , , /2" 8 7, , , , , , /4" 12 7, , , , , , " 16 5, , , , , , Reference: Ma = 0.10 x psig To obtain NI/M B 31.1 values, multiply NI/M B 31.3 values by.94. Technical Information Table 2, arallel s, /B, Table 3, Material llowable tress Values Male Material Value ize psig bar psig bar psi (1378 bar) 1/ ,000 psi (689 bar) 1/ Carbon teel 20,000 psi (1378 bar) 3/ / / / / Temperature Ratings. To determine the maximum allowable working pressure for the piping systems at elevated temperatures, multiply the applicable maximum allowable working pressure by the corresponding temperature stress factor from Table 4. ystem temperatures may be limited by the thread sealant or when applicable, the gasket or O-ring materials. ee Table 6 for O-ring materials temperature ratings. Table 4, tress Factors for Determining ressure Ratings at levated Temperatures Ratings, NI/M B 31.3 Temperature tainless teel Carbon F C teel Copper lloy Temperature limitation of Zinc coating (375 F) used on carbon steel fittings. Material Table 5, Temperature Ratings Material Max. Temperature 1200 (649) 400 (204) Carbon teel 375 (190) Table 6, O-Ring Materials Temperature Ratings Temperature Range F ( C) FKM -15 to 400 (-26 to 204) Nitrile -30 to 250 (-34 to 121)

6 afety Important To help ensure the safe and reliable performance of products, complete system design must be considered prior to installation of the pipe, tubing and fittings. Determining the design compatibility of materials, media, flow, temperatures and pressures; as well as implementing proper installation, operation and maintenance of the system are the responsibilities of the systems owner, designers and users. afety Reminders ll products are designed and manufactured with safety in mind. The following is a limited list of general safety tips as reminders for good safety practices: Do not install, tighten or loosen a fitting or adapter while the system is under pressure. Do not loosen a fitting, nut or plug to relieve or bleed pressure. lways use a back-up wrench to hold the pipe or pipe fitting body steady when tightening or loosening. Use proper thread lubricants and sealants on tapered pipe fittings. Tube fitting end connection and tubing material should be similar (stainless steel fittings on stainless steel pipe, brass fittings on copper tubing, with the tubing materials being fully annealed. Do not weld tube fittings that are assembled. rior to welding, remove all components, nuts, ferrules, and seals. rotect the sealing and thread areas of the tube fitting by covering with a plug or another nut. 06

7 ow to Order The Trufit ipe Fittings Catalog contains part numbers for the most common fitting types and sizes. Other configurations are available. To request other configurations, use the guides on pages 7 and 8 to build a part number or contact customer service. NT Material Brand 1 st nd ize Fitting Type 2 nd nd ize Options I T 4 R 2-10K Technical Inforation Material Designator Material IB I 316 tainless teel I Carbon teel IM lloy 400/R405 IC lloy C-276 Nominal nd Connection ize Designator ize 1 1/16 2 1/8 4 1/4 6 3/8 8 1/2 12 3/ / / Fitting Type Designator Description Designator Description dapter M Male lbow BT Branch Tee MT Male Tee CN Close Nipple C ipe Cap lbow ipe lug lbow T ipe Tee CG ex Coupling R Reducer/dapter CRG ex Reducing Coupling RB Reducing Bushing ollow ex lug treet lbow N ex ong Nipple R Reducing treet lbow N ex Nipple treet lbow RN ex Reducing Nipple T treet Tee MD Mud Dauber (Vent rotector) Options Designator Option -10K 10K Fittings -X98 er TM G93 evel C -X97 No ube 07 ow to Order

8 ow to Order Weld & Braze Fittings Tube Weld, ipe Weld Fittings and dapters Material Brand 1 st nd ize 1 st Fitting Type 2 nd nd ize I T 6 TFC 4 Options Nominal ize Material Fitting Type Designator ize 2 1/8 3 3/16 4 1/4 5 5/16 6 3/8 8 1/2 10 5/8 12 3/ / / Designator Material I 316 tainless teel IM lloy 400 IC lloy C-276 art MT MTT TFC TF TMC TM TU TUC TU TUT TWU Description Male ipe Weld x Tube ocket Weld Male Tube Weld x Tube ocket Weld Tube ocket Connector Tube ocket lbow Tube ocket Male Connector Tube ocket Male lbow Tube ocket Union Tube ocket Union Cross Tube ocket Union lbow Tube ocket Union Tee Tube ocket Weld Union ll Other Fittings, B, BT, and N 37 Fittings and dapters Material Brand 1 st nd ize 1 st nd Type 2 nd nd ize 2 nd nd Type Options I T 4 MT 2 MC -10K Material Nominal ize Fitting Type Designator Material Designator ize art Description IB 2 1/8 5/16-24 N 37 Male N I 316 tainless teel IM lloy 400/R405 IC lloy C-276 Designator Options Option -10K 10K Fittings -BN Nitrile O-ring -V FKM O-rings -X98 -X97 Clean er TM G93 evel C No ube 3 3/16 3/ /4 7/ /16 1/ /8 9/ /2 3/ /8 7/ /4 1 1/ / /4 1 5/ /2 1 7/ /2-12 NF CG FC FT G M MR MRT MT 37 N Countersunk lug Connector lug Male lbow Male B Male BT Male 08

9 election Guide Our selection guide makes it easy to locate any fitting. imply turn to the page designated in the lower right-hand corner. NT Tapered Nipples ex Nipple ex Reducing Nipple ex ong Nipple Close Nipple ow to Order N 12 RN 12 N 13 CN 13 Couplings Cap & lugs ex Coupling ex Reducing Coupling ipe Cap ipe lug ollow ex lug 09 CG 14 RCG 14 C dapters dapter Reducing dapter 16 R 17 Vent rotector MD Mud Dauber 17 Bushing Reducing Bushing RB 18 election Guide Tee Cross ipe Tee treet Tee Branch Tee Male Tee ipe Cross T 19 T 19 BT 20 MT 21 C

10 lbow Union Ball Joint lbow 45 lbow Male lbow ipe Union M KUT 24 treet lbow Reducing treet lbow 45 treet lbow 23 R arallel Fittings & dapters x Male NT x Male Male x Male NT Male x Male FT-MC 25 FT-MT 25 MC-MT 26 MT 26 UG lug, lug, Countersunk G 27 CG 27 10

11 Weld & Braze Tube to ipe Tube ocket Weld Male Connector Tube ocket Weld Connector Tube ock Weld Male lbow Tube ocket Weld lbow TMC Tube ocket Weld Union 32 TFC Tube to Tube Union Tube ocket Weld Union lbow 28 TM Tube ocket Weld Union Tee 29 TF Tube ocket Weld Union Cross 29 election Guide TU 30 TU 30 TUT 31 TUC 31 Weld dapters Male Tube Weld x Tube ocket Weld Male ipe Weld X Tube ocke Weld 11 MTT 32 MT 32 IO/B & N dapter dapters 37 N X NT 37 N X Male NT 37 N X Male NT X Male IO Tapered IO traight X Male NT Tapered N-FC 33 Male NT x Male IO traight N-MC 34 NT x Male IO traight N-MT Male NT x Male IO Tapered FC-MRT MC-MR FC-MR 37 MC-MRT DW-B R 35 Bonded Washer FR-MC O-Ring

12 N: ex Nipple art # Male NT ize ex Flat ressure ressure T1N 1/ /16 11,300 5,550 T2N 1/ /16 10,100 5,050 T4N 1/ /8 8,300 4,050 T6N 3/ /4 7,850 3,950 T8N 1/ /8 7,750 3,850 T12N 3/ /8 7,350 3,650 T16N /8 5,500 2,650 T20N 1 1/ /4 6,200 - T24N 1 1/ ,100 - T32N /2 4,000-10K T2N-10K 1/ /16 10,000 - T4N-10K 1/ /8 10,000 - T6N-10K 3/ /4 10,000 - T8N-10K 1/ /8 10,000 - T12N-10K 3/ /8 10,000 - X T16N-10K /8 10,000 - T32N-10K /2 10,000 - art # Male NT ize 1 Male NT ize ressure ressure RN ex Reducing Nipple T2RN1 1/8 1/ /16 10,100 5,050 T4RN2 1/4 1/ /8 8,300 4,050 T6RN2 3/8 1/ /4 7,850 3,950 T6RN4 3/8 1/ /4 7,850 3,950 T8RN2 1/2 1/ /8 7,750 3,850 T8RN4 1/2 1/ /8 7,750 3,850 T8RN6 1/2 3/ /8 7,750 3,850 T12RN4 3/4 1/ /8 7,350 3,650 T12RN8 3/4 1/ /8 7,350 3,650 T16RN8 1 1/ /8 5,500 2,650 T16RN12 1 3/ /8 5,500 2,650 T20RN16 1 1/ /4 5,500 - T24RN16 1 1/ ,100 - ex 1 10K T4RN2-10K 1/4 1/ /8 10,000 - T6RN2-10K 3/8 1/ /4 10,000 - T6RN4-10K 3/8 1/ /4 10,000 - T8RN2-10K 1/2 1/ /8 10,000 - T8RN4-10K 1/2 1/ /8 10,000 - T8RN6-10K 1/2 3/ /8 10,000 - T12RN4-10K 3/4 1/ /8 10,000 - T12RN6-10K 3/4 3/ /8 10,000 - T12RN8-10K 3/4 1/ /8 10,000 - T16RN4-10K 1 1/ /8 10,000 - T16RN6-10K 1 3/ /8 10,000 - T16RN8-10K 1 1/ /8 10, T16RN12-10K 1 3/ /8 10,000 -

13 N ex ong Nipple art # Male NT ize ressure ressure T2N1.5 1/ /16 10,100 5,050 T2N2.0 1/ /16 10,100 5,050 T2N2.5 1/ /16 10,100 5,050 T2N3.0 1/ /16 10,100 5,050 T4N1.5 1/ /8 8,300 4,050 T4N2.0 1/ /8 8,300 4,050 T4N2.5 1/ /8 8,300 4,050 T4N3.0 1/ /8 8,300 4,050 T4N4.0 1/ /8 8,300 4,050 T6N1.5 3/ /4 7,850 3,950 NT Nipples T6N2.0 3/ /4 7,850 3,950 T6N2.5 3/ /4 7,850 3,950 T6N3.0 3/ /4 7,850 3,950 X T8N2.0 1/ /8 7,750 3,850 T8N3.0 1/ /8 7,750 3,850 T8N4.0 1/ /8 7,750 3,850 T12N2.0 3/ /8 7,350 3,650 T12N3.0 3/ /8 7,350 3,650 T12N4.0 3/ /16 7,350 3,650 T16N /8 5,500 2,650 T16N /8 5,500 2,650 10K T2N3.0-10K 1/ /16 10,000 - T4N2.0-10K 1/ /8 10, T4N3.0-10K 1/ /8 10,000 - T4N4.0-10K 1/ /8 10,000 - T4N6.0-10K 1/ /8 10,000 - T6N3.0-10K 3/ /4 10,000 - T6N4.0-10K 3/ /4 10,000 - T6N6.0-10K 3/ /4 10,000 - T8N1.5-10K 1/ /8 10,000 - T8N K 1/ /8 10,000 - T8N3.0-10K 1/ /8 10,000 - T8N4.0-10K 1/ /8 10,000 - T8N6.0-10K 1/ /8 10,000 - CN Close Nipple RT # Male NT ize ressure ressure T2CN 1/ /16 10,100 5,050 T4CN 1/ /16 8,300 4,050 ROUND T6CN 3/ /16 7,850 3,950 T8CN 1/ /8 7,750 3,850 T12CN 3/ /16 7,350 3,650 T16CN /8 5,500 2,650

14 CG: ex Coupling art # NT ize ressure ressure T2CG 1/ /8 9,250 3,250 T4CG 1/ /4 7,750 3,350 T6CG 3/ /8 6,800 2,650 T8CG 1/ /8 5,950 2,450 T12CG 3/ /8 5,600 2,350 T16CG /8 5,250 2,250 T20CG 1 1/ ,350 - T24CG 1 1/ /8 5,600 - T32CG /8 4,650-10K T2CG-10K 1/ /8 10,000 - T4CG-10K 1/ /16 10,000 - T6CG-10K 3/ " 10,000 - X T8CG-10K 1/ /4 10,000 - T12CG-10K 3/ /2 10,000 - T16CG-10K /8 10,000 - RCG: ex Reducing Coupling art # NT ize 1 NT ize ressure ressure T4RCG2 1/4 1/ /4 7,750 3,250 T6RCG4 3/8 1/ /8 6,800 2,650 T8RCG2 1/2 1/ /8 5,950 2,450 T8RCG4 1/2 1/ /8 5,950 2,450 T8RCG6 1/2 3/ /8 5,950 2,450 T12RCG4 3/4 1/ /8 5,600 2,350 T12RCG8 3/4 1/ /8 5,600 2,350 T16RCG8 1 1/ /8 5,250 2,250 T16RCG12 1 3/ /8 5,250 2, K T4RCG2-10K 1/4 1/ /16 10,000 - T6RCG2-10K 3/8 1/ " 10,000 - T6RCG4-10K 3/8 1/ " 10,000 - T8RCG2-10K 1/2 1/ /4 10,000 - T8RCG4-10K 1/2 1/ /4 10,000 - T8RCG6-10K 1/2 3/ /4 10,000 - T12RCG4-10K 3/4 1/ /2 10,000 - T12RCG6-10K 3/4 3/ /2 10, T12RCG8-10K 3/4 1/ /2 10,000 - T16RCG8-10K 1 1/ /8 10,000 - T16RCG12-10K 1 3/ /8 10,000-14

15 C: ipe Cap art # NT ize ressure ressure T2C 1/ /8 9,250 3,250 T4C 1/ /4 7,750 3,350 T6C 3/ /8 6,800 2,650 T8C 1/ /8 5,950 2,450 T12C 3/ /8 5,600 2,350 T16C /8 5,250 2,250 10K T2C-10K 1/ /8 10,000 - T4C-10K 1/ /16 10,000 - T6C-10K 3/ ,000 - NT Couplings T8C-10K 1/ /4 10,000 - T12C-10K 3/ /2 10,000 - T16C-10K /8 10, : ipe lug art # Male NT ize ressure ressure T1 1/ /8 11,300 5,550 T2 1/ /16 10,100 5,050 T4 1/ /16 8,300 4,050 T6 3/ /16 7,850 3,950 T8 1/ /8 7,750 3,850 T12 3/ /16 7,350 3,650 T /16 5,500 2,650 T20 1 1/ /4 6,200 - T24 1 1/ ,100 - T /2 4,000-10K NT Caps, lugs T2-10K 1/ /16 10,000 - T4-10K 1/ /16 10,000 - X T6-10K 3/ /16 10,000 - T8-10K 1/ /8 10,000 - T12-10K 3/ /16 10,000 - T16-10K /16 10,

16 : ollow ex lug X art # Male NT ize ressure ressure T2 1/ /16 10,100 5,050 T4 1/ /4 8,300 4,050 T6 3/ /16 7,850 3,950 T8 1/ /8 7,750 - T12 3/ /16 7,350 - T /8 5,500 - : dapter art # Male & NT ize ressure ressure T2 1/ /16 9,250 3,250 T4 1/ /4 7,750 3,350 T6 3/ /8 6,800 2,650 T8 1/ /16 5,950 2,450 T12 3/ /8 5,600 2,350 T /8 5,250 2,250 10K T4-10K 1/ /16 10,000 - T6-10K 3/ ,000 - T8-10K 1/ /4 10,000 - T12-10K 3/ /2 10,000 - T16-10K /8 10,000-16

17 R: Reducing dapter 1 art # NT ize MD: Mud Dauber 1 Male NT ize ressure ressure T2R1 1/8 1/ /16 9,250 3,250 T4R2 1/4 1/ /4 7,750 3,350 T6R2 3/8 1/ /8 6,800 2,650 T6R4 3/8 1/ /8 6,800 2,650 T8R2 1/2 1/ /8 5,950 2,450 T8R4 1/2 1/ /8 5,950 2,450 T8R6 1/2 3/ /8 5,950 2,450 T12R4 3/4 1/ /8 5,600 2,350 T12R6 3/4 3/ /8 5,600 2,350 T12R8 3/4 1/ /8 5,600 2,350 T16R4 1 1/ /8 5,250 2,250 T16R8 1 1/ /8 5,250 2,250 T16R12 1 3/ /8 5,250 2,250 T20R16 1 1/ ,500 - T24R16 1 1/ /8 5,500-10K T4R2-10K 1/4 1/ /16 10,000 - T6R2-10K 3/8 1/ ,000 - T6R4-10K 3/8 1/ ,000 - T8R2-10K 1/2 1/ /4 10,000 - T8R4-10K 1/2 1/ /4 10,000 - T8R6-10K 1/2 3/ /4 10,000 - T12R4-10K 3/4 1/ /2 10,000 - T12R6-10K 3/4 3/ /2 10,000 - T12R8-10K 3/4 1/ /2 10,000 - T16R8-10K 1 1/ /8 10,000 - T16R12-10K 1 3/ /8 10,000 - X NT lug, NT dapters 17 NT Mud Daubers art# Male ipe -NT T2MD 1/ /16 T4MD 1/ /16 T6MD 3/ /16 T8MD 1/ /8 T12MD 3/ /16

18 RB: Reducing Bushing 1 X art # Male NT ize 1 NT ize ressure ressure T2RB1 1/8 1/ /16 9,600 3,350 T4RB2 1/4 1/ /8 8,300 3,250 T6RB2 3/8 1/ /4 7,850 3,250 T6RB4 3/8 1/ /4 7,750 3,350 T8RB2 1/2 1/ /8 7,750 3,250 T8RB4 1/2 1/ /8 7,750 3,350 T8RB6 1/2 3/ /8 6,800 2,650 T12RB4 3/4 1/ /8 7,350 3,350 T12RB6 3/4 3/ /8 6,800 2,650 T12RB8 3/4 1/ /8 5,950 2,450 T16RB4 1 1/ /8 5,500 2,650 T16RB6 1 3/ /8 5,500 2,650 T16RB8 1 1/ /8 5,500 2,450 T16RB12 1 3/ /8 5,500 2,350 T20RB16 1 1/ /4 5,250 - T24RB16 1 1/ ,100 - T24RB20 1 1/2 1 1/ ,100 - T32RB /2 4,000 - T32RB / /2 4,000 - T32RB / /2 4,000-10K T4RB2-10K 1/4 1/ /8 10,000 - T6RB4-10K 3/8 1/ /16 10,000 - T8RB2-10K 1/2 1/ /8 10,000 - T8RB4-10K 1/2 1/ /8 10,000 - T8RB6-10K 1/2 3/ " 10,000 - T12RB4-10K 3/4 1/ /8 10,000 - T12RB6-10K 3/4 3/ /8 10,000 - T12RB8-10K 3/4 1/ /4 10,000 - T16RB4-10K 1" 1/ /8 10,000 - T16RB6-10K 1" 3/ /8 10,000 - T16RB8-10K 1" 1/ /8 10,000 - T16RB12-10K 1" 3/ /2 10,000 - T32RB8-10K 2" 1/ /2 10,000-18

19 WRNC FT T: ipe Tee art # NT ize ressure ressure T2T 1/ / ,250 3,250 T4T 1/ / ,750 3,350 T6T 3/ / ,800 2,650 T8T 1/ / ,950 2,450 T12T 3/ / ,600 2,350 T16T / ,250 2,250 T20T 1 1/ ,350 - T24T 1 1/ / ,600 - T32T / ,650-10K T2T-10K 1/ / ,000 - T4T-10K 1/ / ,000 - T6T-10K 3/ / ,000 - T8T-10K 1/ / ,000 - NT Bushings 19 WRNC FT T: treet Tee art # Male & NT ize ressure ressure T2T 1/ / (19.8) 9,250 3,250 T4T 1/ / (27.7) 7,750 3,350 T6T 3/ (10.2) 7/ (31) 6,800 2,650 T8T 1/ (13.5) 1 1/ (37.3) 5,250 2,450 T12T 3/ (18) 1 3/ (40.9) 5,600 - T16T (23.6) 1 5/ (50) 5,250 - T20T 1 1/ (31.8) (60.5) 6,350 - T24T 1 1/ (38.1) 2 3/ (67.1) 5,600 - T32T (49.3) 2 7/ (76.2) 4,650 - NT Tees

20 WRNC FT BT: Branch Tee art # Male & NT ize ressure ressure T2BT 1/ / ,250 3,250 T4BT 1/ / ,750 3,350 T6BT 3/ / ,800 2,650 T8BT 1/ / ,950 2,450 T12BT 3/ / ,600 - T16BT / ,250 - T20BT 1 1/ ,200 - T24BT 1 1/ / ,100 - T32BT / ,000 - WRNC FT MT: Male Tee art # Male NT ize ressure ressure T2MT 1/ / ,100 5,050 T4MT 1/ / ,300 4,050 T6MT 3/ / ,850 3,950 T8MT 1/ / ,750 3,850 T12MT 3/ / ,350 - T16MT / ,500-10K T4MT-10K 1/ / ,000 - T6MT-10K 3/ / ,000 - T8MT-10K 1/ / ,000-20

21 C: ipe Cross WRNC FT art # NT ize ressure ressure T2C 1/ / ,250 3,250 T4C 1/ / ,750 3,350 T6C 3/ / ,800 2,650 T8C 1/ / ,950 2,450 T12C 3/ / ,600 2,350 T16C / ,250 2,250 NT Crosses : lbow WRNC FT 21 art # NT ize ressure ressure T2 1/ / ,250 3,250 T4 1/ / ,750 3,350 T6 3/ / ,800 2,650 T8 1/ / ,950 2,450 T12 3/ / ,600 2,350 T / ,250 2,250 T20 1-1/ / ,800 - T24 1-1/ / ,550 - T / ,050-10K NT lbows T2-10K 1/ / ,000 - T4-10K 1/ / ,000 - T6-10K 3/ / ,000 - T8-10K 1/ / ,

22 Wrench Flat 45: 45 lbow T art # NT ize ressure ressure T245 1/ / ,250 3,250 T445 1/ / ,750 3,350 T645 3/ / ,800 2,650 T845 1/ / ,950 2,450 T1245 3/ / ,600 2,350 T / ,250 2,250 WRNC FT M: Male lbow art # Male NT ize ressure ressure T2M 1/ / ,100 5,050 T4M 1/ / ,300 4,050 T6M 3/ / ,850 3,950 T8M 1/ / ,750 3,850 T12M 3/ / ,150 2,100 T16M / ,800 1,500 10K T4M-10K 1/ / ,000 - T6M-10K 3/ / ,000 - T8M-10K 1/ / ,000-22

23 Wrench Flat : treet lbow art # Male & NT ize ressure ressure T1 1/ / ,600 3,350 T2 1/ / ,250 3,250 T4 1/ / ,750 3,350 T6 3/ / ,800 2,650 T8 1/ / ,950 2,450 T12 3/ / ,600 2,350 T / ,250 2,250 T20 1 1/ ,800 - T24 1 1/ / ,800 - T / ,450 - NT lbows 10K T2-10K 1/ / ,000 - T4-10K 1/ / ,000 - T6-10K 3/ / ,000 - T8-10K 1/ / , R: Reducing treet lbow 1 Wrench Flat art # NT size 1 Male NT size ressure ressure T2R1 1/8 1/ / ,550 3,250 T4R2 1/4 1/ / ,650 3,350 T6R4 3/8 1/ / ,350 2,650 T8R4 1/2 1/ / ,950 2,450 T8R6 1/2 3/ / ) 4,950 2,450

24 WRNC FT 45: 45 treet lbow art # Male & NT ize ressure ressure T245 1/ / ,250 3,250 T445 1/ / ,750 3,350 T645 3/ / ,800 2,650 T845 1/ / ,950 2,450 T1245 3/ / ,600 2,350 T / ,250 2,250 T / ,350 - T / / ,800 - KUT: ipe Union X art # ipe ize NT X Teflon Ring ize ressure T2KUT 1/8 1/ / TR 6,950 T4KUT 1/4 1/ / TR 5,700 T6KUT 3/8 3/ / TR 4,600 T8KUT 1/2 1/ / TR 5,250 T12KUT 3/4 3/ TR 7,200 T16KUT / TR 5,350 T20KUT 1 1/4 1 1/ TR 5,550 T24KUT 1 1/2 1 1/ / TR 4,200 T32KUT / TR 4,000 24

25 FT-MC: x Male NT art # 1 Male NT ressure T6FT4MC 9/ / /16 5,400 T8FT6MC 3/4-16 3/ /16 5,400 T8FT8MC 3/4-16 1/ /16 5,400 1 NT lbows, Union Ball Joint FT-MT: x Male 1 25 art # 1 Male ressure T4FT4MT 7/ / /16 5,400 T4FT6MT 9/ / /16 5,400 T6FT6MT 9/ / /16 5,400 T6FT8MT 3/4-16 9/ /16 4,800 T8FT6MT 9/ / /8 5,400 T8FT8MT 3/4-16 3/ /16 4,800 T8FT10MT 7/8-14 3/ /8 3,600 T10FT8MT 3/4-16 7/ ,800 Fittings, dapters T10FT12MT 1 1/ / /8 4,200 T12FT10MT 7/ / /4 3,600 T12FT16MT 1 5/ / /8 2,400 T16FT12MT 1 1/ / /2 4,200

26 MC-MT: Male NT x Male X 1 art # 1 Male NT Male ressure T4MC4MT 1/4-18 7/ /16 6,000 T4MC6MT 1/4-18 9/ /16 6,000 T6MC6MT 3/8-18 9/ /16 6,000 T6MC8MT 3/8-18 3/ /8 6,000 T8MC8MT 1/2-14 3/ /8 6,000 T8MC10MT 1/2-14 7/ ,800 T12MC12MT 3/ / /4 4,800 T12MC16MT 3/ / /2 3,600 T16MC16MT /2 1 5/ /2 3,600 10K T4MC4MT-10K 1/4-18 7/ / T4MC6MT-10K 1/4-18 9/ / T6MC6MT-10K 3/8-18 9/ / T6MC8MT-10K 3/8-18 3/ / T8MC8MT-10K 1/2-14 3/ / T8MC10MT-10K 1/2-14 3/ / T12MC12MT-10K 3/ / / T12MC16MT-10K 3/ / / T16MC16MT-10K /2 1-5/ / MT: Male x Male X art # Male ressure T4MT 7/ /16 6,000 T6MT 9/ /16 6,000 T8MT 3/ /8 6,000 T10MT 7/ ,400 T12MT 11/ /4 4,800 T16MT 1 5/ /2 3,600 T20MT 1 5/ /8 3,000 T24MT 1 7/ /8 2,400 T32MT 2 1/ /4 1,800 26

27 G: ex lug, art # X ressure T2G 5/ /16 7,200 T3G 3/ /2 7,200 T4G 7/ /16 7,200 T5G 1/ /8 7,200 T6G 9/ /16 7,200 T8G 3/ /8 7,200 T10G 7/ ,200 T12G 1-1/ /4 7,200 T16G 1-5/ /2 6,600 T20G 1-5/ /8 4,800 T24G 1-7/ /8 3,600 T32G 2-1/ /4 2,400 Fittings, dapters 27 CG: lug, Countersunk X art # ressure T2CG 5/ / T3CG 3/ / T4CG 7/ / T5CG 1/ / T6CG 9/ / T8CG 3/ / T10CG 7/ / T12CG 1 1/ / T16CG 1 5/ / T20CG 1 5/ / T24CG 1 7/ / lugs

28 D TMC: Tube ocket Weld x Male Connector Tx T art # T Tube O.D. NT Male ipe D Tx ressure T4TMC4 1/4 1/ / ,000 T6TMC4 3/8 1/ / ,000 T6TMC6 3/8 3/ / ,800 T6TMC8 3/8 1/ / ,700 T8TMC4 1/2 1/ / ,600 T8TMC6 1/2 3/ / ,600 T8TMC8 1/2 1/ / ,600 T10TMC8 5/8 1/ / ,700 T12TMC12 3/4 3/ / ,700 T16TMC / ,100 D TFC: Tube ocket Weld Connector Tx T art # T Tube O.D. NT Male ipe D Tx ressure T2TFC2 1/8 1/ / ,500 T4TFC2 1/4 1/ / ,500 T4TFC4 1/4 1/ / ,600 T6TFC4 3/8 1/ / ,600 T8TFC6 1/2 3/ / ,300 T8TFC8 1/2 1/ / ,900 T10TFC8 5/8 1/ / ,600 T12TFC12 3/4 3/ / ,600 28

29 TU: Tube ocket Weld Union D T Tx art # T Tube O.D. D Tx ressure T4TU 1/ ,700 T6TU 3/ ,100 T8TU 1/ ,600 T10TU 5/ ,400 T12TU 3/ ,900 T16TU ,600 Weld traight TF: Tube ocket Weld lbow Tx T D W Wrench Flat 29 T art # T Tube O.D. NT Male ipe D Tx W ressure T4TF4 1/4 1/ /4 7,400 T6TF4 3/8 1/ /8 7,400 T6TF8 3/8 1/ /16 5,700 T8TF8 1/2 1/ /16 5,700 T10TF8 5/8 1/ /16 5,600 T12TF12 3/4 3/ /16 4,600 Weld lbows

30 D W TM: Tube ocket Weld Male lbow Tx T art # T Tube O.D. NT Male ipe D Tx W ressure T4M4 1/4 1/ /2 8,000 T6TM4 3/8 1/ /2 8,000 T6TM6 3/8 3/ /16 7,800 T6TM8 3/8 1/ /16 7,700 T8TM8 1/2 1/ /16 6,600 T12TM12 3/4 3/ ,800 D W Tx T TU: Tube ocket Weld Union lbow art # T Tube O.D. D Tx W ressure T4TU 1/ /16 10,700 T6TU 3/ /2 8,100 T8TU 1/ /4 6,600 T10TU 5/ /8 6,700 T12TU 3/ ,900 T16TU /4 5,600 30

31 D TUT: Tube ocket Weld Union Tee W T Tx art # T Tube O.D. D Tx W ressure T2TUT 1/ /16 12,600 T4TUT 1/ /16 10,700 T6TUT 3/ /16 8,100 T8TUT 1/ /4 6,600 T10TUT 5/ /8 6,700 T12TUT 3/ /16 5,900 T16TUT /16 5,600 Weld lbows 31 D TUC: Tube ocket Weld Union Cross art # T Tube O.D. D Tx W ressure T2TUC 1/ /16 11,000 T4TUC 1/ /16 10,700 T6TUC 3/ /16 8,100 T8TUC 1/ /4 6,600 T12TUC 3/ /16 5,900 W T Tx Weld Tees, Cross

32 D MTT: Male Tube Weld x Tube ocket Weld T T1 Tx art # T Tube O.D. T1 Tube ocket D Tx ressure IT4MTT2 1/4 1/ ,600 IT6MTT4 3/8 1/ ,200 IT8MTT4 1/2 1/ ,500 IT8MTT6 1/2 3/ ,500 IT12MTT8 3/4 1/ ,300 IT16MTT8 1 1/ , ½ MT: Male ipe Weld x Tube ocket Weld T1 Tx D art # ipe ize T1 Tube ocket D Tx ressure IT4MT4 1/4 1/ ,600 IT6MT6 3/8 3/ ,600 IT6MT8 3/8 1/ ,200 IT8MT4 1/2 1/ ,300 IT8MT6 1/2 3/ ,300 IT8MT8 1/2 1/ ,200 IT12MT6 3/4 3/ ,200 IT12MT8 3/4 1/ ,200 IT12MT12 3/4 3/ ,700 IT16MT6 1 3/ ,600 IT16MT8 1 1/ ,600 32

33 N 37 Flared Fittings & daptes N-FC: 37 N Connector art # Tube O.D. 1 NT ressure ressure T2N2FC 1/8 5/16 1/ /16 6,000 - T4N2FC 1/4 7/16 1/ /16 6,000 3,250 T4N4FC 1/4 7/16 1/ /4 6,000 3,250 T5N4FC 5/16 1/2 1/ /4 6,000 - T6N4FC 3/8 9/16 1/ /4 6,000 3,250 T6N6FC 3/8 9/16 3/ /8 6,000 3,250 T8N6FC 1/2 3/4 3/ /8 6,000 - T8N4FC 1/2 3/4 1/ /16 6,000 - T8N8FC 1/2 3/4 1/ /8 6,000 - T10N8FC 5/8 7/8 1/ /8 6,000 - T12N12FC 3/4 1 1/16 3/ /8 4,800 2,600 T12N8FC 3/4 1 1/16 1/ /8 5,400 - T16N16FC 1 1 5/ /8 3,600 1,950 T20N20FC 1 1/4 1 5/8 1-1/ ,000 - T24N24FC 1 1/2 1 7/8 1-1/ /8 2,400 - T32N32FC 2 2 1/ /8 1,800 - Weld dapters 33

34 N-MC: 37 N x Male NT 34 art # Tube O.D. 1 NT 1 ressure ressure T2N2MC 1/8 5/ / /16 6,000 - T3N2MC 3/16 3/8-24 1/ /16 6,000 - T4N2MC 1/4 7/ / /2 6,000 3,250 T4N4MC 1/4 7/ / /16 6,000 3,250 T4N6MC 1/4 7/ / /4 6,000 - T4N8MC 1/4 7/ / /8 6,000 - T5N2MC 5/16 1/2-20 1/ /16 6,000 - T5N4MC 5/16 1/2-20 1/ /16 6,000 - T6N2MC 3/8 9/ / /8 6,000 - T6N4MC 3/8 9/ / /8 6,000 3,250 T6N6MC 3/8 9/ / /4 6,000 3,250 T6N8MC 3/8 9/ / /8 6,000 - T8N4MC 1/2 3/4-16 1/ /16 6,000 - T8N6MC 1/2 3/4-16 3/ /16 6,000 3,250 T8N8MC 1/2 3/4-16 1/ /8 6,000 3,250 T8N12MC 1/2 3/4-16 3/ /8 4,800 - T10N8MC 5/8 7/8-14 1/ /16 6,000 - T10N12MC 5/8 7/8-14 3/ /8 4,800 - T12N8MC 3/4 1 1/ / /8 5,400 - T12N12MC 3/4 1 1/ / /8 4,800 2,600 T12N16MC 3/4 1 1/ /8 3,600 - T14N12MC 7/8 1 3/ / /4 4,200 - T16N12MC 1 1 5/ / /8 4,200 - T16N16MC 1 1 5/ /8 3,600 1,950 T20N20MC 1-1/4 1 5/ / /16 3,000 - T24N24MC 1-1/2 1 7/ / ,400 - T32N32MC 2 2 1/ /8 1,800-10K T2N4MC-10K 1/8 5/ / /16 10,000 - T4N4MC-10K 1/4 7/ / /16 10,000 - T4N6MC-10K 1/4 7/ / /4 10,000 - T4N8MC-10K 1/4 7/ / /8 10,000 - T6N4MC-10K 3/8 9/ / /8 10,000 - T6N6MC-10K 3/8 9/ / /4 10,000 - T6N8MC-10K 3/8 9/ / /8 10,000 - T8N4MC-10K 1/2 3/4-16 1/ /16 10,000 - T8N6MC-10K 1/2 3/4-16 3/ /16 10,000 - T8N8MC-10K 1/2 3/4-16 1/ /8 10,000 - T8N12MC-10K 1/2 3/4-16 3/ /8 10,000 - T12N8MC-10K 3/4 1-1/ / /8 10,000 - T12N12MC-10K 3/4 1-1/ / /8 10,000 - T16N6MC-10K 1 1-5/ / /8 10,000 - T16N8MC-10K 1 1-5/ / /8 10,000 - T16N12MC-10K 1 1-5/ / /8 10,000 - T16N16MC-10K 1 1-5/ /8 10,000 -

35 N-MT: 37 N x Male art # Tube O.D. 1 Male 1 ressure T2N2MT 1/8 5/ / /16 6,000 T3N3MT 3/16 3/8-24 3/ /2 6,000 T4N4MT 1/4 7/ / /16 6,000 T4N5MT 1/4 7/ / /8 6,000 T4N6MT 1/4 7/ / /16 6,000 T4N8MT 1/4 7/ / /8 6,000 T5N5MT 5/16 1/2-20 1/ /8 6,000 T6N6MT 3/8 9/ / /16 6,000 T6N4MT 3/8 9/ / /8 6,000 T6N8MT 3/8 9/ / /8 6,000 T6N10MT 3/8 9/ / ,000 T8N8MT 1/2 3/4-16 3/ /8 6,000 T8N6MT 1/2 3/4-16 9/ /16 6,000 T8N10MT 1/2 3/4-16 7/ ,000 T8N12MT 1/2 3/ / /4 6,000 T10N8MT 5/8 7/8 14 3/ /16 6,000 T10N10MT 5/8 7/8 14 7/ /4 6,000 T10N12MT 5/8 7/ / /4 6,000 T12N8MT 3/4 1 1/ / /8 6,000 T12N10MT 3/4 1 1/ / /8 6,000 T12N12MT 3/4 1 1/ / /4 6,000 T12N14MT 3/4 1 1/ / /8 5,400 T12N16MT 3/4 1 1/ / /2 5,400 T16N16MT 1 1 5/ / /2 5,400 T16N12MT 1 1 5/ / /8 5,400 T20N20MT 1 1/4 1 5/ / /8 3,600 T24N24MT 1 1/2 1 7/ / /8 2,400 T32N32MT 2 2 1/ / /4 1,800 10K T4N4MT-10K 1/4 7/ / /16 10,000 T4N6MT-10K 1/4 7/ / /16 10,000 T6N4MT-10K 3/8 9/ / /8 10,000 T6N6MT-10K 3/8 9/ / /16 10,000 T8N8MT-10K 1/2 3/4-16 3/ /8 10,000 N 37 Flared Fittings & daptes 35

36 FC-MRT: NT x Male IO Tapered 1 art # NT 1 Male IO Tapered ressure ressure T2FC2MRT 1/8 1/ / T4FC4MRT 1/4 1/ / T6FC6MRT 3/8 3/ / T8FC8MRT 1/2 1/ / T12FC12MRT 3/4 3/ / T16FC16MRT / K T2FC2MRT-10K 1/8 1/ /8 10,000 - T4FC4MRT-10K 1/4 1/ /4 10,000 - T6FC6MRT-10K 3/8 3/ /8 10,000 - T8FC8MRT-10K 1/2 1/ /8 10,000 - T12FC12MRT-10K 3/4 3/ /8 10,000 - T16FC16MRT-10K /8 10,000 - MC-MRT: Male NT x Male IO Tapered 1 X art # Male NT 1 Male IO Tapered 1 ressure ressure T2MC2MRT 1/8 1/ /16 10,050 5,050 T4MC4MRT 1/4 1/ /8 8,050 4,050 T6MC6MRT 3/8 3/ /4 7,850 3,950 T8MC8MRT 1/2 1/ /8 7,750 3,850 T12MC12MRT 3/4 3/ /8 7,350 3,650 T16MC16MRT /8 5,350 2,650 10K T2MC2MRT-10K 1/8-27 1/ /16 10,000 - T4MC4MRT-10K 1/4-18 1/ /8 10,000 - T6MC6MRT-10K 3/8-18 3/ /4 10,000 - T8MC8MRT-10K 1/2-14 1/ /8 10,000 - T12MC12MRT-10K 3/4-14 3/ /8 10,000 - T16MC16MRT-10K / /8 10,000-36

37 MC-MR: Male NT x Male IO traight art # 1 Male NT Male IO traight ressure T2MC2MR 1/8 1/ /16 11,400 T4MC4MR 1/4 1/ /4 6,000 T6MC6MR 3/8 3/ /8 6,000 T8MC8MR 1/2 1/ /8 6,000 T12MC12MR 3/4 3/ /8 4,800 T16MC16MR /4 3,600 Trufit 10K T2MC2MR-10K 1/8-28 1/ /16 10,000 T2MC4MR-10K 1/4-19 1/ /4 10,000 T4MC2MR-10K 1/8-28 1/ /16 10,000 T4MC4MR-10K 1/4-19 1/ /4 10,000 T4MC6MR-10K 3/8-19 1/ /8 10,000 T4MC8MR-10K 1/2-14 1/ /16 10,000 T6MC4MR-10K 1/4-19 3/ /4 10,000 T6MC6MR-10K 3/8-19 3/ /8 10,000 T6MC8MR-10K 1/2-14 3/ /16 10,000 T8MC4MR-10K 1/4-19 1/ /8 10,000 T8MC6MR-10K 3/8-19 1/ /8 10,000 T8MC8MR-10K 1/2-14 1/ /16 10,000 T8MC10MR-10K 5/8-14 1/ /16 10,000 T8MC12MR-10K 3/4-14 1/ /16 10,000 T12MC8MR-10K 1/2-14 3/ /8 10,000 T12MC12MR-10K 3/4-14 3/ /16 10,000 T12MC16MR-10K / /8 10,000 T16MC8MR-10K 1/ /8 10,000 T16MC12MR-10K 3/ /8 10,000 T16MC16MR-10K /8 10,000 T16MC20MR-10K 1-1/ ,000 1 B Fittings & dapters 37 DW-B: Bonded Washer art # 4DW-B DW-B DW-B DW-B DW-B * Bonded washer comes standard as a stainless steel washer with FKM inner ring.

38 FC-MR: NT x Male IO traight 1 art # NT 1 Male IO traight ressure T2FC2MR 1/8 1/ /4 6,500 T4FC4MR 1/4 1/ /4 6,000 T6FC6MR 3/8 3/ /8 6,000 T8FC8MR 1/2 1/ /8 6,000 T12FC12MR 3/4 3/ /8 4,200 T16FC16MR /4 3,600 FR-MC: IO traight x Male NT 1 art # IO traight 1 Male NT ressure T4FR4MC 1/4 1/ /4 7,200 T6FR6MC 3/8 3/ /8 7,200 T8FR8MC 1/2 1/ /8 6,000 10K T4FR4MC-10K 1/4 1/ /16 10,000 T6FR6MC-10K 3/8 3/ ,000 T8FR8MC-10K 1/2 1/ /4 10,000 38

39 More roducts Tube Fittings Duolok and Griplok twoferrule and Unilok single ferrule tube fittings provide leak-tight installation even when intermixed with wagelok, oke Gyrolok and arker CI TM fittings. Valves The Flook valve offering includes ball, check, metering, needle, toggle, plug, bleed, and purge valves for pressures up to 10,000 psig. B Fittings & dapters Tubing offers straight and coiled seamless 316 stainless steel instrumentation tubing for instrumentation, process and utility applications. ipe Fittings and 10K pipe fittings are available in a wide range of weld, threaded and flared connections. 39 Filters Flook in-line and teetype filters trap particles to clean sample fluids and protect sensitive process and analytical instrumentation components and equipment. ose TF-lined and flexible metal core hose assemblies are used in a variety of instrumentation, utility, biopharm and other applications. Tools & ccessories Turnro professional hand tools, power tools and installation training make quality tube system installation faster and easier. Quick Connects offers single-end shutoff, double-end shut off, and full-flow quick connects for instrumentation and process applications.

40 Founded 1926 rivately owned, third generation business Modern single-site vertically integrated manufacturing facility DFR-compliant raw material IO 9001 quality management system imited ifetime Warranty The Only 100% merican Made Instrument Valve s Fittings 8250 Boyle arkway Twinsburg, O Fittings Corp. ll rights reserved. TFC