BRITISH DESIGN AND MANUFACTURE
|
|
- Mervyn Stewart
- 5 years ago
- Views:
Transcription
1 ube ittings
2 One of the most comprehensive component design and manufacture packages available today to the Oil and etrochemical Industry is offered by Safelok Components. arnessing the demands of the industry for otal Quality Management (QM), the Safelok indigenous quality philosophy provides a range of Valves and Instrumentation ittings finished to the highest standards. Also ideal for other industrial applications, where significant opportunities exist for component replacement and enhancement. Construction material specification includes Stainless Steel, Aluminium Bronze & Carbon Steel. A variety of alternative exotic material specifications are available eg. Monel, asteloy, Incoloy and itanium. Maintaining their QM practices throughout the manufacturing process, Safelok ensure all materials utilised in the completion of major components are traceable. Copies of the original mill certificates are retained for future reference. All products are manufactured in compliance with ISO 9002 / EN / BS Safeloks capabilities also extend to Instrumentation rocurement ackages for major Oil Companies and the Construction Industry, both in the United Kingdom and throughout the world. SAELOK is a trade mark of Safelok Components Limited BRIIS DESIN AND MANUACURE
3 INRUCION SAELOK LIMIED is housed in a modern factory in Wigan, Lancashire, England. An area renowned for its manufacturing skills. It is also ideally situated to all major motorway networks and Manchester International Airport. One of the most comprehensive component design and manufacture packages available today to the Oil and etrochemical Industry is offered by Safelok Components. arnessing the demands of the industry for otal Quality Management (QM), the Safelok indigenous quality philosophy provides a large range of Valves and Instrumentation ittings to the highest standards to meet the ever increasing demand of the industry. Safelok is aware of its environmental commitments and all manufacturing procedures conform to ISO Certificate ISO 9001:2008 Environmental Certificate ISO 14001:2004 iresafe Certificate Design Certificate AROVALS ARAMCO Kuwait NC Kuwait Oil Company Abu Dhabi Company for Onshore Oil Operations (ADCO) Safelok products have serviced the industry for over 25 years and we are proud of our achievements in acquiring many accreditations. / 1
4 SAELOK IINS Safelok twin ferrule tube fittings provide a leak proof, torque free seal on all compression end connections. otal system design ensures leak proof connections. Safelok tube fittings are composed of four precision made parts, - body - nut - front ferrule - rear ferrule. All parts are manufactured to very stringent tolerances under rigid quality control procedures. Safelok tube fittings are available in fractional and metric sizes. Metric size range from: mm ractional size range from: 1/8-3/16-1/4-3/16-3/8-1/2-5/8-3/4-1 Safelok tube fittings are available with ISO pipe threads for connecting to equipment ports using British BS, DIN, and JIS straight pipe thread and Din British BS threads. echnical details of available threads are shown on page 38 and page 39 of this catalogue. Only European and North American materials are used in the manufacture of Safelok tube fittings. Other material available:- Duplex 51 Alloy 825 Super Duplex 55/53 Alloy 625 UNS MO Alloy 400 Aluminium Bronze NES833 Alloy C276 2 /
5 INDEX MC Male Connector - N (ractional)... 4 MC Male Connector - N (Metric)... 5 MC Male hermocouple - N (ractional)... 6 MC Male hermocouple - N (Metric)... 7 BWC Butt Weld Connector - (ractional)... 8 BWC Butt Weld Connector - (Metric)... 9 SWC Socket Weld Connector - (ractional) SWC Socket Weld Connector - (Metric) C emale Connector - N (ractional) C emale Connector - N (Metric) U Equal Union RU Reducing Union BU Bulkhead Union ELU Equal Elbow Union ee RED Reducing Adaptor AM Male Stud Standpipe Adaptor - N (ractional) AM Male Stud Standpipe Adaptor - N (Metric) A emale Stud Standpipe Adaptor - N (ractional) A emale Stud Standpipe Adaptor - N (Metric) BE Blanking End B Blanking lug N Compression Nut C / RC ront / Back Sealring MB Male Bulkhead Connector - N B emale Bulkhead Connector - N ME Male Stud Elbow - N E emale Stud Elbow - N M Male Branch ee - N emale Branch ee - N M Male Run ee - N emale Run ee - N UC Union Cross Assembly Instructions Standard hread Sizes Service ressures Conversion Data / 3
6 MC COMRESSION COULIN MALE CONNECOR - N (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 MC 8 RACIONAL - roduct Coding IE READ A B C D E WEI K/100 1 /8 1 /8 2 MC 2 29 /32 3 /8 17 /32 41 / /64 7 /16 7 /16 3 / /8 1 /4 2 MC /8 9 /16 17 /32 41 / /64 7 /16 9 /16 3 / /16 1 /8 3 MC 2 61 /64 3 /8 9 /16 21 / /64 1 /2 7 /16 1 / /16 1 /4 3 MC /32 9 /16 9 /16 21 / /64 1 /2 9 /16 1 / /4 1 /8 4 MC /8 19 /32 45 / /64 9 /16 9 /16 3 / /4 1 /4 4 MC /16 9 /16 19 /32 45 / /64 9 /16 9 /16 3 / /4 3 /8 4 MC /32 9 /16 19 /32 45 / /64 9 /16 11 /16 3 / /4 1 /2 4 MC /16 3 /4 19 /32 45 / /64 9 /16 7 /8 3 / /16 1 /4 5 MC /4 9 /16 21 /32 49 / /64 5 /8 9 /16 1 / /8 1 /4 6 MC /32 9 /16 21 /32 49 / /64 11 /16 11 /16 9 / /8 3 /8 6 MC /32 9 /16 21 /32 49 / /64 11 /16 11 /16 9 / /8 1 /2 6 MC /2 3 /4 21 /32 49 / /64 11 /16 7 /8 9 / /2 1 /4 8 MC /16 9 /16 29 /32 55 / /32 7 /8 7 /8 9 / /2 3 /8 8 MC /16 9 /16 29 /32 55 / /32 7 /8 7 /8 13 / /2 1 /2 8 MC /2 3 /4 29 /32 55 / /32 7 /8 7 /8 13 / /2 3 /4 8 MC /32 3 /4 29 /32 55 / /16 7 /8 1 1 /8 13 / /8 1 /2 10 MC /32 3 /4 15 /16 27 / / /16 1 / /8 3 /4 10 MC /32 3 /4 15 /16 27 / / /8 1 / /4 1 /2 12 MC /32 3 /4 31 /32 55 / / /8 1 1 /8 1 / /4 3 /4 12 MC /32 3 /4 31 /32 55 / / /8 1 1 /8 5 / /4 16 MC /4 3 / / / / /2 1 1 /2 23 / MC /16 15 / / / / /2 1 1 /2 7 / Also available in BS aper, BS arallel and ISO Metric threads 4 /
7 MC COMRESSION COULIN MALE CONNECOR - N (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12m MC 8 MERIC - roduct Coding IE READ A B C D E WEI K/ /8 4m MC /4 4m MC /8 6m MC /4 6m MC /8 6m MC /2 6m MC /4 8m MC /8 8m MC /4 10m MC /8 10m MC /2 10m MC /4 12m MC /8 12m MC /2 12m MC /4 12m MC /8 14m MC /2 14m MC /4 14m MC /8 15m MC /2 15m MC /4 15m MC /8 16m MC /2 16m MC /4 16m MC /2 18m MC /4 18m MC m MC /2 20m MC /4 20m MC m MC /4 22m MC m MC /4 25m MC m MC Also available in BS aper, BS arallel and ISO Metric threads / 5
8 MC COMRESSION COULIN MALE ERMOCOULE - N (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 MC 8 RACIONAL - roduct Coding IE READ A B C D E WEI K/100 1 /8 1 /8 2 MC 2 29 /32 3 /8 17 /32 41 / /64 7 /16 7 / /8 1 /4 2 MC /8 9 /16 17 /32 41 / /64 7 /16 9 / /16 1 /8 3 MC 2 61 /64 3 /8 9 /16 21 / /64 1 /2 7 / /16 1 /4 3 MC /32 9 /16 9 /16 21 / /64 1 /2 9 / /4 1 /8 4 MC /8 19 /32 45 / /64 9 /16 9 / /4 1 /4 4 MC /16 9 /16 19 /32 45 / /64 9 /16 9 / /4 3 /8 4 MC /32 9 /16 19 /32 45 / /64 9 /16 11 / /4 1 /2 4 MC /16 3 /4 19 /32 45 / /64 9 /16 7 / /16 1 /4 5 MC /4 9 /16 21 /32 49 / /64 5 /8 9 / /8 1 /4 6 MC /32 9 /16 21 /32 49 / /64 11 /16 11 / /8 3 /8 6 MC /32 9 /16 21 /32 49 / /64 11 /16 11 / /8 1 /2 6 MC /2 3 /4 21 /32 49 / /64 11 /16 7 / /2 1 /4 8 MC /16 9 /16 29 /32 55 / /32 7 /8 7 / /2 3 /8 8 MC /16 9 /16 29 /32 55 / /32 7 /8 7 / /2 1 /2 8 MC /2 3 /4 29 /32 55 / /32 7 /8 7 / /2 3 /4 8 MC /32 3 /4 29 /32 55 / /16 7 /8 1 1 / /8 1 /2 10 MC /32 3 /4 15 /16 27 / / / /8 3 /4 10 MC /32 3 /4 15 /16 27 / / / /4 1 /2 12 MC /32 3 /4 31 /32 55 / / /8 1 1 / /4 3 /4 12 MC /32 3 /4 31 /32 55 / / /8 1 1 / /4 16 MC /4 3 / / / / /2 1 1 / MC /16 15 / / / / /2 1 1 / Also available in BS aper, BS arallel and ISO Metric threads 6 /
9 MC COMRESSION COULIN MALE ERMOCOULE - N (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12m MC 8 MERIC - roduct Coding IE READ A B C D E WEI K/ /8 4m MC /4 4m MC /8 6m MC /4 6m MC /8 6m MC /2 6m MC /4 8m MC /8 8m MC /4 10m MC /8 10m MC /2 10m MC /4 12m MC /8 12m MC /2 12m MC /4 12m MC /8 14m MC /2 14m MC /4 14m MC /8 15m MC /2 15m MC /4 15m MC /8 16m MC /2 16m MC /4 16m MC /2 18m MC /4 18m MC m MC /2 20m MC /4 20m MC m MC /4 22m MC m MC /4 25m MC m MC Also available in BS aper, BS arallel and ISO Metric threads / 7
10 BWC COMRESSION COULIN BU WELD CONNECOR - (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12 BWC 8 RACIONAL - roduct Coding NOMINAL BORE IE SIZE A B C D E WEI K/100 1 /8 1 /8 2 BWC 2 29 /32 3 /8 17 /32 41 / /64 7 /16 7 /16 3 /32 13 / /8 1 /4 2 BWC /8 9 /16 17 /32 41 / /64 7 /16 9 /16 3 /32 35 / /16 1 /8 3 BWC 2 61 /64 3 /8 9 /16 21 / /64 1 /2 7 /16 1 /8 13 / /16 1 /4 3 BWC 4 15 /32 9 /16 9 /16 21 / /64 1 /2 9 /16 1 /8 35 / /4 1 /8 4 BWC /8 19 /32 45 / /64 9 /16 9 /16 3 /16 13 / /4 1 /4 4 BWC /16 9 /16 19 /32 45 / /64 9 /16 9 /16 3 /16 35 / /4 3 /8 4 BWC /32 9 /16 19 /32 45 / /64 9 /16 11 /16 3 /16 43 / /4 1 /2 4 BWC /16 3 /4 19 /32 45 / /64 9 /16 7 /8 3 /16 27 / /16 1 /4 5 BWC /4 9 /16 21 /32 49 / /64 5 /8 9 /16 1 /4 35 / /8 1 /4 6 BWC 4 19 /32 9 /16 21 /32 49 / /64 11 /16 11 /16 9 /32 35 / /8 3 /8 6 BWC 6 19 /32 9 /16 21 /32 49 / /64 11 /16 11 /16 9 /32 43 / /8 1 /2 6 BWC /2 3 /4 21 /32 49 / /64 11 /16 7 /8 9 /32 27 / /2 1 /4 8 BWC 4 15 /16 9 /16 29 /32 55 / /32 7 /8 7 /8 9 /32 35 / /2 3 /8 8 BWC 6 15 /16 9 /16 29 /32 55 / /32 7 /8 7 /8 13 /32 43 / /2 1 /2 8 BWC /2 3 /4 29 /32 55 / /32 7 /8 7 /8 13 /32 27 / /2 3 /4 8 BWC /32 3 /4 29 /32 55 / /16 7 /8 1 1 /8 13 / / /8 1 /2 10 BWC /32 3 /4 15 /16 27 / / /16 1 /2 27 / /8 3 /4 10 BWC /32 3 /4 15 /16 27 / / /8 1 /2 1 3 / /4 1 /2 12 BWC /32 3 /4 31 /32 55 / / /8 1 1 /8 1 /2 27 / /4 3 /4 12 BWC /32 3 /4 31 /32 55 / / /8 1 1 /8 5 /8 1 3 / /4 16 BWC /4 3 / / / / /2 1 1 /2 23 / / BWC /16 15 / / / / /2 1 1 /2 7 /8 1 5 / /
11 BWC COMRESSION COULIN BU WELD CONNECOR - (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12m BWC 8 MERIC - roduct Coding NOMINAL BORE IE SIZE A B C D E WEI K/ /8 4m BWC /4 4m BWC /8 6m BWC /4 6m BWC /8 6m BWC /2 6m BWC /4 8m BWC /8 8m BWC /4 10m BWC /8 10m BWC /2 10m BWC /4 12m BWC /8 12m BWC /2 12m BWC /4 12m BWC /8 14m BWC /2 14m BWC /4 14m BWC /8 15m BWC /2 15m BWC /4 15m BWC /8 16m BWC /2 16m BWC /4 16m BWC /2 18m BWC /4 18m BWC m BWC /2 20m BWC /4 20m BWC m BWC /4 22m BWC m BWC /4 25m BWC m BWC / 9
12 SWC COMRESSION COULIN SOCKE WELD CONNECOR - (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 SWC 12 RACIONAL - roduct Coding NOMINAL BORE SIZE A B C D E WEI K/100 1 /8 1 /8 2 SWC 2 29 /32 11 /32 17 /32 41 / /64 7 /16 7 /16 3 /32 13 / /8 1 /4 2 SWC /8 3 /8 17 /32 41 / /64 7 /16 9 /16 3 /32 35 / /16 1 /8 3 SWC 2 61 /64 11 /32 9 /16 21 /32 115/64 1 /2 7 /16 1 /8 13 / /16 1 /4 3 SWC 4 15 /32 3 /8 9 /16 21 /32 129/64 1 /2 9 /16 1 /8 35 / /4 1 /8 4 SWC /32 19 /32 45 /64 119/64 9 /16 9 /16 3 /16 13 / /4 1 /4 4 SWC 4 13 /16 3 /8 19 /32 45 /64 131/64 9 /16 9 /16 3 /16 35 / /4 3 /8 4 SWC 6 17 /32 3 /8 19 /32 45 /64 133/64 9 /16 11 /16 3 /16 43 / /4 1 /2 4 SWC 8 17 /16 15 /32 19 /32 45 /64 147/64 9 /16 7 /8 3 /16 27 / /16 1 /4 5 SWC /4 3 /8 21 /32 49 /64 137/64 5 /8 9 /16 1 /4 35 / /8 1 /4 6 SWC 4 19 /32 3 /8 21 /32 49 /64 137/64 11 /16 11 /16 9 /32 35 / /8 3 /8 6 SWC 6 19 /32 3 /8 21 /32 49 /64 137/64 11 /16 11 /16 9 /32 43 / /8 1 /2 6 SWC /2 15 /32 21 /32 49 /64 151/64 11 /16 7 /8 9 /32 27 / /2 1 /4 8 SWC 4 15 /16 3 /8 29 /32 55 /64 123/32 7 /8 7 /8 9 /32 35 / /2 3 /8 8 SWC 6 15 /16 3 /8 29 /32 55 /64 123/32 7 /8 7 /8 13 /32 43 / /2 1 /2 8 SWC /2 15 /32 29 /32 55 /64 129/32 7 /8 7 /8 13 /32 27 / /2 3 /4 8 SWC /32 15 /32 29 /32 55 /64 115/16 7 /8 1 1 /8 13 / / /8 1 /2 10 SWC /32 15 /32 15 /16 27 /32 129/ /16 1 /2 27 / /8 3 /4 10 SWC /32 15 /32 15 /16 27 /32 129/ /8 1 /2 1 3 / /4 1 /2 12 SWC /32 15 /32 31 /32 55 /64 163/ /8 1 1 /8 1 /2 27 / /4 3 /4 12 SWC /32 15 /32 31 /32 55 /64 163/ /8 1 1 /8 5 /8 1 3 / /4 16 SWC /4 15 / / /64 217/ /2 1 1 /2 23 / / SWC /16 19 / / /64 229/ /2 1 1 /2 7 /8 1 5 / /
13 SWC COMRESSION COULIN SOCKE WELD CONNECOR - (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8m SWC 12 MERIC - roduct Coding NOMINAL BORE SIZE A B C D E WEI K/ /8 4m SWC /4 4m SWC /8 6m SWC /4 6m SWC /8 6m SWC /2 6m SWC /4 8m SWC /8 8m SWC /4 10m SWC /8 10m SWC /2 10m SWC /4 12m SWC /8 12m SWC /2 12m SWC /4 12m SWC /8 14m SWC /2 14m SWC /4 14m SWC /8 15m SWC /2 15m SWC /4 15m SWC /8 16m SWC /2 16m SWC /4 16m SWC /2 18m SWC /4 18m SWC m SWC /2 20m SWC /4 20m SWC m SWC /4 22m SWC m SWC /4 25m SWC m SWC / 11
14 C COMRESSION COULIN EMALE CONNECOR - N (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 C 8 RACIONAL - roduct Coding IE READ A B C D E WEI K/100 1 /8 1 /8 2 C 2 7 /8 25 /64 17 /32 41 / /64 7 /16 9 /16 3 / /8 1 /4 2 C /32 19 /32 17 /32 41 / /64 7 /16 3 /4 3 / /16 1 /8 3 C 2 29 /32 25 /64 9 /16 21 / /16 1 /2 9 /16 1 / /4 1 /8 4 C 2 15 /16 25 /64 19 /32 45 / /64 9 /16 9 /16 3 / /4 1 /4 4 C /8 19 /32 19 /32 45 / /32 9 /16 3 /4 3 / /16 1 /4 5 C /32 19 /32 21 /32 49 / /64 5 /8 3 /4 1 / /8 1 /4 6 C /16 19 /32 21 /32 49 / /64 11 /16 3 /4 9 / /8 3 /8 6 C /4 19 /32 21 /32 49 / /64 11 /16 7 /8 9 / /2 3 /8 8 C /4 19 /32 29 /32 55 / /32 7 /8 7 /8 13 / /2 1 /2 8 C /16 25 /32 29 /32 55 / /32 7 /8 1 1 /8 13 / /2 3 /4 8 C /2 13 /16 29 /32 55 / /32 7 /8 1 5 /16 13 / /8 1 /2 10 C /32 25 /32 15 /16 27 / / /8 1 / /4 1 /2 12 C /16 25 /32 31 /32 55 / / /8 1 1 /8 5 / /4 3 /4 12 C /2 13 /16 31 /32 55 / / /8 1 5 /16 5 / /4 16 C /8 13 / / / / /2 1 1 /2 7 / C / / / / /16 7 / Also available in BS aper, BS arallel and ISO Metric threads 12 /
15 C COMRESSION COULIN EMALE CONNECOR - N (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12m C 8 MERIC - roduct Coding IE READ A B C D E WEI K/ /8 4m C /4 4m C /8 6m C /4 6m C /8 6m C /4 8mC /8 8m C /4 10m C /8 10m C /8 12m C /2 12m C /4 12m C /8 14m C /2 14m C /8 15m C /2 15m C /4 16m C /2 16m C /2 18m C /4 18m C /4 22m C /2 20m C /4 20m C /4 25m C m C Also available in BS aper, BS arallel and ISO Metric threads / 13
16 U COMRESSION COULIN EQUAL UNION 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 U RACIONAL - roduct Coding A C D E WEI K / /8 2 U 7 /8 17 /32 41 / /32 7 /16 7 /16 3 / /16 3 U 61 /64 9 /16 21 / /32 1 /2 7 /16 1 / /4 4 U 1 1 /32 19 /32 45 / /8 9 /16 9 /16 3 / /16 5 U 1 7 /64 21 /32 49 / /64 5 /8 9 /16 1 / /8 6 U 1 3 /16 21 /32 49 / /32 11 /16 11 /16 9 / /2 8 U 1 7 /32 29 /32 55 / /32 7 /8 7 /8 13 / /8 10 U 1 1 /4 15 /16 27 / /16 1 / /4 12 U 1 5 /16 31 /32 55 / / /8 1 1 /8 5 / U 1 19 / / / /8 1 1 /2 1 1 /2 7 / MECRIC - roduct Coding A C D E WEI K / m U m U m U m U m U m U m U m U m U m U m U m U /
17 RU COMRESSION COULIN REDUCIN UNION 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 RU 4 RACIONAL - roduct Coding X A C CX D DX E X WEI K / /4 1 /8 4 RU 2 31 /32 19 /32 17 /32 45 /64 41 / /16 9 /16 7 /16 9 /16 3 / /8 1 /4 6 RU /8 21 /32 19 /32 49 /64 45 / /32 11 /16 9 /16 11 /16 3 / /2 1 /4 8 RU /32 29 /32 19 /32 55 /64 45 / /64 7 /8 9 /16 7 /8 3 / /2 5 /16 8 RU /16 29 /32 21 /32 55 /64 49 / /64 7 /8 5 /8 7 /8 1 / /2 3 /8 8 RU /32 29 /32 21 /32 55 /64 49 / /64 7 /8 9 /16 7 /8 9 / /4 1 /2 12 RU /16 31 /32 29 /32 55 /64 55 / / /8 7 /8 1 1 /8 13 / /2 16 RU / /64 29 / /64 55 / / /2 7 /8 1 1 /2 13 / /8 16 RU / /64 15 / /64 27 / / / /2 1 / /4 16 RU / /64 31 / /64 55 / / /2 7 /8 1 1 /2 5 / MERIC - roduct Coding X A C CX D DX E X WEI K / m RU m RU m RU m RU m RU m RU m RU m RU m RU m RU m RU m RU m RU m RU / 15
18 BU COMRESSION COULIN BULKEAD UNION 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 BU RACIONAL - roduct Coding A AX C D DX E ANEL OLE DRILL SIZE ANEL ICK- NESS MAX WEI K / /8 2 BU 1 1 /2 31 /32 17 /32 41 / / /32 7 /16 7 /16 3 /32 21 /64 7 / /16 3 BU 1 9 / /32 41 / / /8 1 /2 7 /16 1 /8 25 /64 7 / /4 4 BU 1 11 / /32 19 /32 45 / / /32 9 /16 11 /16 3 /16 29 /64 13 / /16 5 BU 1 13 / /8 21 /32 49 / / /32 5 /8 3 /4 1 /4 33 /64 7 / /8 6 BU 1 7 /8 1 5 /32 21 /32 49 / / /32 11 /16 3 /4 9 /32 37 /64 7 / /2 8 BU /4 29 /32 55 / / /16 7 /8 15 /16 13 /32 49 /64 1 / /8 10 BU 2 1 / /32 15 /16 27 / / / /8 1 /2 57 /64 1 / /4 12 BU 2 5 / /32 31 /32 55 / / / /8 1 5 /16 5 /8 1 1 /64 21 / BU 2 13 / / / / / / /2 1 1 /2 7 / /64 25 / MERIC - roduct Coding A AX C D DX E ANEL OLE DRILL SIZE ANEL ICK- NESS MAX WEI K / m BU m BU m BU m BU m BU m BU m BU m BU m BU m BU m BU m BU /
19 ELU COMRESSION COULIN EQUAL ELBOW 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 ELU RACIONAL - roduct Coding A C E A/ WEI K / /8 2 ELU 3 /4 17 / /8 7 /16 1 /2 3 / /16 3 ELU 25 /32 9 / /64 1 /2 1 /2 1 / /4 4 ELU 13 /16 19 / /64 9 /16 1 /2 3 / /16 5 ELU 7 /8 21 / /64 5 /8 9 /16 1 / /8 6 ELU 29 /32 21 / /64 11 /16 9 /16 9 / /2 8 ELU 63 /64 29 / /64 7 /8 11 /16 13 / /8 10 ELU 1 1 /16 15 / / /16 1 / /4 12 ELU 1 11 /64 31 / / /8 15 /16 5 / ELU 1 13 / / / /2 1 1 /4 7 / MERIC - roduct Coding A C E A/ WEI K / m ELU m ELU m ELU m ELU m ELU m ELU m ELU m ELU m ELU m ELU m ELU m ELU / 17
20 COMRESSION COULIN UNION EE 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 RACIONAL - roduct Coding A AX C E EX A / WEI K / / /2 3 /4 17 / / /64 7 /16 1 /2 3 / / /16 25 /32 9 / /8 1 1 /16 1 /2 1 /2 1 / / /8 13 /16 19 / / /64 9 /16 1 /2 3 / / /4 7 /8 21 / / /64 5 /8 9 /16 1 / / /16 29 /32 21 / / /64 11 /16 9 /16 9 / / /32 63 /64 29 / / /64 7 /8 11 /16 13 / / / /32 15 / / / /16 1 / / / /64 31 / / / /8 15 /16 5 / / / / / / /2 1 1 /4 7 / MERIC - roduct Coding A AX C E EX A / WEI K / m m m m m m m m m m m m /
21 RED COMRESSION COULIN REDUCIN ADAOR 316 SAINLESS SEEL RECISION INSRUMENAION IINS 4 RED 8 RACIONAL - roduct Coding X A C D E WEI K / /8 1 /4 2 RED /16 17 /32 41 / /64 7 /16 7 /16 3 / /4 3 /8 4 RED /32 19 /32 45 / /64 9 /16 9 /16 3 / /4 1 /2 4 RED /16 19 /32 45 / /64 9 /16 9 /16 3 / /16 1 /2 5 RED /64 21 /32 49 / /16 9 /16 5 /8 1 / /8 1 /2 6 RED /32 21 /32 49 / /64 11 /16 11 /16 9 / /2 3 /4 8 RED /4 29 /32 55 / /32 7 /8 7 /8 13 / /2 1 8 RED /32 55 / /32 7 /8 1 1 /8 13 / / RED /64 15 /16 27 / / /8 1 / / RED /16 31 /32 55 / / /8 1 1 /8 5 / MERIC - roduct Coding X A C D E WEI K / m RED m RED m RED m RED m RED m RED m RED m RED m RED m RED / 19
22 AM COMRESSION COULIN MALE SUD SANDIE ADAOR - N (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 AM 8 RACIONAL - roduct Coding IE READ A AX B WEI K/100 1 /8 1 /8 2 AM /8 1 7 /32 3 /8 9 /16 5 / /16 1 /8 3 AM /32 9 /16 3 /8 9 /16 1 / /4 1 /8 4 AM /4 21 /32 3 /8 9 /16 11 / /4 1 /4 4 AM /16 21 /32 9 /16 9 /16 11 / /4 1 /2 4 AM /16 21 /32 3 /4 7 /8 11 / /8 3 /8 6 AM /32 23 /32 9 /16 11 /16 17 / /8 1 /2 6 AM /4 23 /32 3 /4 7 /8 17 / /2 1 /4 8 AM /4 15 /16 9 /16 9 /16 9 / /2 1 /2 8 AM /32 15 /16 3 /4 7 /8 23 / /2 3 /4 8 AM /16 3 /4 1 1 /16 23 / /4 1 /2 12 AM / /4 7 /8 1 / /4 3 /4 12 AM /8 1 3 /4 1 1 /8 37 / / AM / /4 1 3 /8 37 / /4 16 AM / /64 3 /4 1 1 /8 49 / Also available in BS aper, BS arallel and ISO Metric threads 20 /
23 AM COMRESSION COULIN MALE SUD SANDIE ADAOR - N (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8m AM 8 MERIC - roduct Coding IE READ A AX B WEI K/ /8 4m AM /4 4m AM /8 6m AM /4 6m AM /8 6m AM /2 6m AM /4 8m AM /8 8m AM /2 8m AM /4 10m AM /8 10m AM /2 10m AM /4 12m AM /8 12m AM /2 12m AM /4 12m AM /8 14m AM /2 14m AM /4 14m AM /2 15m AM /4 15m AM /2 16m AM /4 16m AM /4 20m AM m AM /4 22m AM /4 25m AM Also available in BS aper, BS arallel and ISO Metric threads / 21
24 A COMRESSION COULIN EMALE SUD SANDIE ADAOR - N (RACIONAL) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 A 8 RACIONAL - roduct Coding IE READ A AX B WEI K / /8 1 /4 2 A /4 1 7 /32 19 /32 3 /4 5 / /4 1 /4 4 A /8 21 /32 19 /32 3 /4 11 / /4 1 /8 4 A /16 21 /32 19 /32 7 /8 11 / /4 1 /2 4 A /8 21 /32 25 / /16 11 / /8 1 /4 6 A /16 23 /32 19 /32 3 /4 17 / /8 3 /8 6 A /2 23 /32 19 /32 7 /8 17 / /8 1 /2 6 A /16 23 /32 25 / /8 23 / /2 1 /4 8 A /32 15 /16 19 /32 3 /4 23 / /2 3 /8 8 A /32 15 /16 19 /32 7 /8 23 / /2 1 /2 8 A /32 15 /16 25 / /16 23 / /4 3 /8 12 A / /32 7 /8 9 / /4 1 /2 12 A / / /16 37 / /4 16 A / /64 13 / /16 47 / Also available in BS aper, BS arallel and ISO Metric threads 22 /
25 A COMRESSION COULIN EMALE SUD SANDIE ADAOR - N (MERIC) 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8m A 8 MERIC - roduct Coding IE READ A AX B WEI K / /4 4m A /4 6m A /8 6m A /2 6m A /4 8m A /8 8m A /2 8m A /4 10m A /8 10m A /2 10m A /4 12m A /8 12m A /2 12m A /8 14m A /2 14m A /8 15m A /2 15m A /4 16m A /8 16m A /2 16m A /2 18m A /4 18m A /4 20m A m A /4 22m A /4 25m A Also available in BS aper, BS arallel and ISO Metric threads / 23
26 BE COMRESSION COULIN BLANKIN END 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 BE RACIONAL - roduct Coding A C D E WEI K / /8 2 BE 17 /32 17 /32 41 /64 53 /64 7 /16 7 / /16 3 BE 37 /64 9 /16 21 /32 55 /64 1 /2 7 / /4 4 BE 5 /8 19 /32 45 /64 59 /64 9 /16 9 / /16 5 BE 43 /64 21 /32 49 / /8 9 / /8 6 BE 23 /32 21 /32 49 / /64 11 /16 11 / /2 8 BE 3 /4 29 /32 55 / /32 7 /8 7 / /8 10 BE 27 /32 15 /16 27 / / / /4 12 BE 29 /32 31 /32 55 / / /8 1 1 / BE 1 1 / / / / /2 1 1 / MERIC - roduct Coding A C D E WEI K / m BE m BE m BE m BE m BE m BE m BE m BE m BE m BE m BE m BE /
27 B COMRESSION COULIN BLANKIN LU 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 B RACIONAL - roduct Coding A WEI K / /8 2 B 7 / /16 3 B 1 / /4 4 B 9 / /16 5 B 5 / /8 6 B 11 / /2 8 B 7 / /8 10 B /4 12 B 1 1 / B 1 1 / MERIC - roduct Coding A WEI K / m B m B m B m B m B m B m B m B m B m B m B / 25
28 N COMRESSION COULIN COMRESSION NU 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 N RACIONAL - roduct Coding L A WEI K / /8 2 N 15 /32 7 / /16 3 N 15 /32 1 / /4 4 N 1 /2 9 / /16 5 N 17 /32 5 / /8 6 N 9 /16 11 / /2 8 N 11 /16 7 / /8 10 N 11 / /4 12 N 11 / / N 13 / /2 7.4 MERIC - roduct Coding L A WEI K / m N m N m N m N m N m N m N m N m N m N m N m N /
29 C/RC COMRESSION COULIN RON / BACK SEALRIN 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 C 8 RC RACIONAL (RON) - roduct Coding RACIONAL (BACK) - roduct Coding A WEI K / 100 A WEI K / /8 2 C /16 3 C /4 4 C /16 5 C /8 6 C /2 8 C /8 10 C /4 12 C C /8 2 RC /16 3 RC /4 4 RC /16 5 RC /8 6 RC /2 8 RC /8 10 RC /4 12 RC RC 0.3 MERIC (RON) - roduct Coding MERIC (BACK) - roduct Coding A WEI K / 100 A WEI K / m C m C m C m C m C m C m C m C m C m C m C m C m RC m RC m RC m RC m RC m RC m RC m RC m RC m RC m RC m RC 0.3 / 27
30 MB COMRESSION COULIN MALE BULKEAD CONNECOR - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12m MB 8 RACIONAL - roduct Coding IE READ A AX B C D E ANEL OLE DRILL SIZE ANEL ICK- NESS MAX WEI K / /4 1 /8 4 MB /8 1 3 /32 3 /8 19 /32 45 / /64 9 /16 11 /16 3 /16 29 /64 13 / /4 1 /4 4 MB / /32 9 /16 19 /32 45 / /64 9 /16 11 /16 3 /16 29 /64 13 / /8 1 /4 6 MB / /32 9 /16 21 /32 49 / /64 11 /16 3 /4 9 /32 37 /64 7 / /2 1 /4 8 MB / /4 9 /16 29 /32 55 / /2 7 /8 15 /16 13 /32 49 /64 1 / /2 1 /2 8 MB / /4 3 /4 29 /32 55 / /16 7 /8 15 /16 13 /32 49 /64 1 / MERIC - roduct Coding IE READ A AX B C D E ANEL OLE DRILL SIZE ANEL ICK- NESS MAX WEI K / /8 6m MB /4 6m MB /4 10m MB /4 12m MB /2 12m MB Also available in BS aper, BS arallel and ISO Metric threads 28 /
31 B COMRESSION COULIN EMALE BULKEAD CONNECOR - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 B 8 RACIONAL - roduct Coding IE READ A AX B C DX E ANEL OLE DRILL SIZE ANEL ICK- NESS MAX WEI K / /4 1 /8 4 B / /32 25 /64 19 / / /64 9 /16 9 /16 3 /16 29 /64 13 / /4 1 /4 4 B /4 1 1 /32 19 /32 19 / / /64 9 /16 3 /4 3 /16 29 /64 13 / /8 1 /4 6 B /8 1 5 /32 19 /32 21 / / /64 11 /16 3 /4 9 /16 37 /64 7 / /2 1 /4 8 B / /4 19 /32 29 / / /16 7 /8 7 /8 13 /32 49 /64 1 / /2 1 /2 8 B /4 1 1 /4 25 /32 29 / / /32 7 /8 1 1 /8 13 /32 49 /64 1 / MERIC - roduct Coding IE READ A AX B C DX E ANEL OLE DRILL SIZE ANEL ICK- NESS MAX WEI K / /8 6m B /4 6m B /4 10m B /4 12m B /2 12m B Also available in BS aper, BS arallel and ISO Metric threads / 29
32 ME COMRESSION COULIN MALE SUD ELBOW - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 ME 8 RACIONAL - roduct Coding IE READ A AX B C E A / WEI K / /8 1 /8 2 ME 2 3 /4 3 /4 3 /8 17 / /8 7 /16 1 /2 3 / /16 1 /8 3 ME 2 25 /32 3 /4 3 /8 9 /16 13 /32 1 /2 1 /2 1 / /4 1 /8 4 ME 2 13 /16 3 /4 3 /8 19 /32 17 /64 9 /16 1 /2 3 / /4 1 /4 4 ME 4 13 /16 5 /16 9 /16 19 /32 17 /64 9 /16 1 /2 3 / /8 1 /4 6 ME 4 29 / /16 21 / /64 11 /16 9 /16 9 / /8 3 /8 6 ME 6 29 / /8 9 /16 21 / /64 11 /16 9 /16 9 / /2 3 /8 8 ME 6 63 / /64 9 /16 29 / /64 7 /8 11 /16 11 / /2 1 /2 8 ME 8 63 / /16 3 /4 29 / /64 7 /8 11 /16 13 / /8 1 /2 10 ME / /32 3 /4 15 / / /16 7 / /4 1 /2 12 ME / /16 3 /4 31 / / /8 15 /16 7 / /4 3 /4 12 ME / /64 3 /4 31 / / /8 15 /16 5 / /4 16 ME / /32 3 / / / /2 1 1 /4 5 / MERIC - roduct Coding IE READ A AX B C E A / WEI K / /8 4m ME /8 6m ME /4 6m ME /4 8m ME /4 10m ME /8 10m ME /8 12m ME /2 12m ME /2 14m ME /2 15m ME /2 16m ME /2 18m ME /4 18m ME /2 20m ME /4 20m ME /4 25m ME Also available in BS aper, BS arallel and ISO Metric threads 30 /
33 E COMRESSION COULIN EMALE SUD ELBOW - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 12m E 8 RACIONAL - roduct Coding IE READ A AX B C E A / WEI K / /4 1 /8 4 E 2 3 /16 7 /8 25 /64 19 / /64 9 /16 1 /2 3 / /4 1 /4 4 E 4 7 /8 1 3 /16 19 /32 19 / /64 9 /16 9 /16 3 / /8 1 /4 6 E / /16 19 /32 21 / /64 11 /16 9 /16 7 / /2 1 /4 8 E /32 11/4 19 /32 29 / /16 7 /8 11 /16 7 / /2 1 /2 8 E / /8 25 /32 29 / /32 7 /8 15 /16 13 / /4 3 /4 12 E / /16 13 /16 31 / /8 1 1 /8 15 /16 5 / MERIC - roduct Coding IE READ A AX B C E A / WEI K / /8 6m E /4 6m E /4 10m E /4 12m E /2 12m E /2 14m E /2 15m E /2 16m E /2 18m E /4 18m E /4 20m E /4 22m E Also available in BS aper, BS arallel and ISO Metric threads / 31
34 M COMRESSION COULIN MALE BRANC EE - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 M 8 RACIONAL - roduct Coding IE READ A AX AY B C E EX A / WEI K / /4 1 /8 4 M /8 13 /16 3 /4 3 /8 19 / / /64 9 /16 1 /2 3 / /4 1 /4 4 M /16 27 /32 31 /32 9 /16 19 / / /64 9 /16 1 /2 3 / /8 1 /4 6 M /16 29 /32 31 /32 9 /16 21 / / /64 11 /16 9 /16 9 / /2 3 /8 8 M /32 63 / /64 9 /16 29 / / /64 7 /8 11 /16 13 / /2 1 /2 8 M /8 1 3 / /8 3 /4 29 / / /32 7 /8 11 /16 13 / /8 1 /2 10 M /8 1 3 / /8 3 /4 15 / /8 1 9 / /16 1 / /4 1 /2 12 M / / /64 3 /4 55 / /8 1 9 / /8 15 /16 5 / /4 3 /4 12 M / / /64 3 /4 55 / /8 1 9 / /8 15 /16 5 / /4 16 M / / /64 3 / / / / /2 1 1 /4 7 / MERIC - roduct Coding IE READ A AX AY B C E EX A / WEI K / /8 6m M /4 6m M /4 10m M /8 12m M /2 12m M /2 14m M /2 15m M /2 16m M /2 18m M /2 20m M /4 20m M /4 22m M /4 25m M Also available in BS aper, BS arallel and ISO Metric threads 32 /
35 COMRESSION COULIN EMALE BRANC EE - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 6 8 RACIONAL - roduct Coding IE READ A AX AY B C E EX A / WEI K / /4 1 / /8 13 /16 3 /4 3 /8 19 / / /64 9 /16 1 /2 3 / /4 1 / /16 27 /32 31 /32 9 /16 19 / / /64 9 /16 1 /2 3 / /8 1 / /16 29 /32 31 /32 9 /16 21 / / /64 11 /16 9 /16 9 / /2 3 / /32 63 / /64 9 /16 29 / / /64 7 /8 11 /16 13 / /2 1 / /8 1 3 / /8 3 /4 29 / / /32 7 /8 11 /16 13 / /8 1 / /8 1 3 / /8 3 /4 15 / /8 1 9 / /16 1 / /4 1 / / / /64 3 /4 55 / /8 1 9 / /8 15 /16 5 / /4 3 / / / /64 3 /4 55 / /8 1 9 / /8 15 /16 5 / / / / /64 3 / / / / /2 1 1 /4 7 / MERIC - roduct Coding IE READ A AX AY B C E EX A / WEI K / /8 6m /4 6m /4 10m /8 12m /2 12m /2 16m /2 20m /4 20m /4 25m Also available in BS aper, BS arallel and ISO Metric threads / 33
36 M COMRESSION COULIN MALE RUN EE - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 M 8 RACIONAL - roduct Coding IE READ A AX AY B C E EX A / WEI K / /4 1 /8 4 M /16 13 /16 3 /4 3 /8 19 / / /64 9 /16 1 /2 3 / /4 1 /4 4 M /32 13 /16 31 /32 9 /16 19 / / /64 9 /16 1 /2 3 / /8 1 /4 6 M /8 29 /32 31 /32 9 /16 21 / / /64 11 /16 9 /16 9 / /2 3 /8 8 M /16 63 / /64 9 /16 29 / / /64 7 /8 11 /16 13 / /2 1 /2 8 M / / /32 3 /4 29 / / /32 7 /8 11 /16 13 / /8 1 /2 10 M / / /32 3 /4 15 / / / /16 1 / /4 1 /2 12 M /4 1 1 /4 1 1 /2 3 /4 31 / / / /8 15 /16 5 / /4 3 /4 12 M /4 1 1 /4 1 1 /2 3 /4 31 / / / /8 15 /16 5 / MERIC - roduct Coding IE READ A AX AY B C E EX A / WEI K / /8 6m M /4 6m M /4 10m M /8 12m M /2 12m M /2 14m M /2 15m M /2 16m M /2 18m M /2 20m M /4 20m M /4 22m M Also available in BS aper, BS arallel and ISO Metric threads 34 /
37 COMRESSION COULIN EMALE RUN EE - N 316 SAINLESS SEEL RECISION INSRUMENAION IINS 6 8 RACIONAL - roduct Coding IE READ A AX AY B C E EX A / WEI K / /4 1 / /16 13 /16 3 /4 3 /8 19 / / /64 9 /16 1 /2 3 / /4 1 / /32 13 /16 31 /32 9 /16 19 / / /64 9 /16 1 /2 3 / /8 1 / /8 29 /32 31 /32 9 /16 21 / / /64 11 /16 9 /16 9 / /2 3 / /16 63 / /64 9 /16 29 / / /64 7 /8 11 /16 13 / /2 1 / / / /32 3 /4 29 / / /32 7 /8 11 /16 13 / /8 1 / / / /32 3 /4 15 / / / /16 1 / /4 1 / /4 1 1 /4 1 1 /2 3 /4 31 / / / /8 15 /16 5 / /4 3 / /4 1 1 /4 1 1 /2 3 /4 31 / / / /8 15 /16 5 / MERIC - roduct Coding IE READ A AX AY B C E EX A / WEI K / /8 6m /4 6m /4 10m /8 12m /2 12m /2 16m /2 20m /4 20m Also available in BS aper, BS arallel and ISO Metric threads / 35
38 UC COMRESSION COULIN UNION CROSS 316 SAINLESS SEEL RECISION INSRUMENAION IINS 8 UC RACIONAL - roduct Coding A AX C E EX A / WEI K / /8 2 UC 1 1 /2 3 /4 17 / / /64 7 /16 1 /2 3 / /16 3 UC 1 9 /16 25 /32 9 / /8 1 1 /16 1 /2 1 /2 1 / /4 4 UC 1 5 /8 13 /16 19 / / /64 9 /16 1 /2 3 / /16 5 UC 1 3 /4 7 /8 21 / / /64 5 /8 9 /16 1 / /8 6 UC 1 13 /16 29 /32 21 / / /64 11 /16 9 /16 9 / /2 8 UC 1 15 /16 63 /64 29 / / /64 1 /8 11 /16 13 / /8 10 UC 2 1 /8 1 1 /16 15 / /8 1 7 / /16 1 / /4 12 UC 2 1 /2 1 1 /4 31 / / / /8 15 /16 5 / MERIC - roduct Coding A AX C E EX A / WEI K / m UC m UC m UC m UC m UC m UC m UC m UC m UC m UC m UC /
39 COMRESSION COULIN 316 SAINLESS SEEL RECISION INSRUMENAION IINS ASSEMBLY INSRUCIONS Insert the tubing through the nut and ferrules until it comes up to the tube-stop. Ensure that the nut is finger tight. hen tighten the nut 1 1 /4 turns. RE-ASSEMBLY O SAELOK IINS Safelok ittings mat be assembled and disassembled repeatedly. he following instructions should be followed for re-assembly. ighten the nut with a wrench until a sharp rise in torque is felt, then snug with wrench. Insert the tubing end with the previously set ferrules into the fitting body and tighten the nut until hand-tight. IDENIICAION O SAELOK IIN or ease of identification, Safelok ittings in metric sizes have an additional stepped shoulder on the nuts and bodies to distinguish them from fractional sizes. (See illustration). / 37
40 COMRESSION COULIN SANDARD READ SIZES N - ANSI B2.1 N - ANSI B2.1 INCES READ O INC A INCES READ O INC 1 / / / / / / / / / / / / / / BS aper B.S INCES MM READ O INC A 1 / / / / / / / /
41 COMRESSION COULIN SANDARD READ SIZES BS arallel B.S BS arallel B.S INCES MM READ O INC INCES MM READ O INC 1 / / / / / / / / / / / / / / ISO Metric 8 x x x x x x x x x x x x x x x x x x x x / 39
42 Wall hickness in Inches COMRESSION COULIN SERVICE RESSURES ABLE and 316 Stainless Steel (ASM A-269 or equivalent) Maximum allowable working pressures in bars for temperatures between -29 C and 38 C O / / / / / / / / / Allowable stress = 1,300 bar. Burst pressures = these pressures x 4. ABLE 2 Carbon Steel (ASM A-179 or equivalent) Maximum allowable working pressures in bars for temperatures between -29 C and 38 C Wall hickness in Inches O / / / / / / / / / Allowable stress = 1,100 bar. Burst pressures = these pressures x 3. ABLE 3 Copper ubes (ASM B-75 or equivalent) Maximum allowable working pressures in bars for temperatures between -29 C and 38 C Wall hickness in Inches O / / / / / / / / / Allowable stress = 420 bar. Burst pressures = these pressures x /
43 Wall hickness in mm COMRESSION COULIN SERVICE RESSURES ABLE 4 Copper Annealed Seamless (ASM B-75 or equivalent) Maximum allowable working pressures in bars for temperatures between -20 C and 30 C O Allowable stress = bar. Burst pressures = these pressures x 5. ABLE and 316 Stainless Steel (Annealed Seamless)(ASM A-269 or equivalent) Maximum allowable working pressures in bars for temperatures between -29 C and 38 C Wall hickness in mm O Allowable stress = 1290 bar. Burst pressures = these pressures x 4. ABLE 6 actors to determine pressure ratings at elevated temperatures. actors C ALUMINIUM ASM B210 (6061-6) SEEL ASM A179 COER ASM B SS ASM A SS ASM A o determine allowable pressure at elevated temperatures: multiply allowable working pressure from ables 1-5 by factor shown in able 6. Example: At 90 C multiply the maximum pressure given in the tables 1-5 by the factor given in the table above. eg. for a 316 SS tube 1/4 diameter 1.25mm wall thickness 650 C service temperature, the maximum allowable working pressure would be 605 x 0.35 = bar. Note: All the values shown in the tables are for reference only and are based on information given in standards. Safelok are not responsible for the accuracy of information presented in these tables. / 41
44 COMRESSION COULIN CONVERSION DAA Imperial ube Dimensions emperature Conversion able Decimal Equivalents 8ths Decimal Decimal Equivalents 64ths Decimal INCES MM C 1 / / / / / / / / / / / / SS ipe Dimensions ANSI B36-10 NOMINAL IE SIZE OUSIDE MEER (INCES) 1 / / / / / mm to Inch Equivalent MM INC MM INC / / / / / / ths Decimal 1 / / / / / / / / nds Decimal 1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / emperature conversion formula: C = 5/9 ( -32) = 9/5 C /
45 COMRESSION COULIN CONVERSION DAA low Rate ROM / O LI / SEC AL / MIN 2 / SEC 2 / MIN BBL / R BBL / DAY lit / sec gal / min ft 3 / sec x 10 4 ft 3 / min bbl / hr bbl / day x bbl refers to bbl oil 42 gallons Area ROM / O CM 2 M 2 KM 2 IN 2 2 MILE 2 cm x x m 2 1 x x x 10 7 km 2 1 x x x x in x x x ft x x 10 8 mile x x x x ressure ROM / O MM / g IN / g IN / 2 O / 2 O AM LB / IN 2 K / CM 2 ka mm / g in / g in / 2O ft / 2O atm lb / in kg / cm ka Bar = 1 x 10 4 dynes / cm 2 = atm = 14.5 psi = 100 ka = 0.1 Ma 1.0 psi = 6.9 ka Volume ROM / O CM 3 LIRE M 3 IN 3 3 YD 3 L OZ L L Q AL AL (Br) BBL (Oil) BBL (Liq) cm x x x x x x x 10 6 litre m 3 1 x x x in x x x x x 10 4 ft x yd x x x fl oz x x x x 10 4 fl pt x x fl qt x gal gal (Br.) bbl (oil) 1.59 x bbl (liq) 1.19 x / 43
46 SAELOK WORLDWIDE n Safelok's International Network Safelok valves and fittings have been used on major projects worldwide for over a quarter of a century. AYS ECNOLOY Emission ree Valves - With a Lifetime uarantee E WORLDS BES - A SE ABOVE E RES. SAELOK is a trade mark of Safelok Components Limited 44 /
47 Our other product ranges include
48 MANUACURED BY: SAELOK COMONENS LD. UNI 1, E KILSAW CENRE, KILSAW SREE, LAMBEREAD INDUSRIAL ESAE, WIAN WN5 8EA ENLAND EL: +44 (0) AX: +44 (0) Website: enq@safelok.com
Admiralty Bronze Tube Fittings
Admiralty Bronze ube ittings One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components. arnessing the
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationInstrumentation Needle Valves & Manifolds
Instrumentation Needle Valves & Manifolds One of the most comprehensive component design and manufacture packages available today to the Oil and Petrochemical Industry is offered by Safelok Components.
More informationTri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationManifold Accessories. Catalog 4190-FP-ACC May 2007
Manifold Accessories Catalog 4190-FP-ACC May 2007 Contents Page 3 Lapped joint tube adaptors (LJ) Page 4 Flange to compression connectors (FC) Page 5 Kidney flanges to compression connectors (KF) Page
More informationUNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL
UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL TEL: 0121 778 6001 FAX: 0121 778 6002 EMAIL: sales@astonfittings.com WEBSITE: www.astonfittings.com QUALITY POLICY The directors of Aston
More informationRIGGING HARDWARE SOLUTIONS for WIRE AND ROD SYSTEMS
RIGGING HARDWARE SOLUTIONS for WIRE AND ROD SYSTEMS YSC QA108 THE STA-LOK STORY The new Sta-Lok range bears clear traces of our marine heritage. When we started manufacturing Sta-Lok rigging hardware in
More informationInte rated. Piping. Manufacturer & Exporter: A Government of India Recognized Star Export House PIPES TUBES ROUND BAR PLATES SHEETS
ISO 9001-08 ISO 14001-04 OHSAS 18001-07 PE-97/23/EC Certified Company RINA M A R I N E Approved Manufacture PIPES UBES ROUN BAR PLAES SHEES Inte rated Manufacturer & Exporter: A WORL OF FERROUS & NON -
More informationindustrial valves manufacturer SOLAR DIVISION PETROCHEMICAL DIVISION GAS DIVISION MARINE SERVICES WATER DIVISION General manufacturing program
industrial valves manufacturer PETROCHEMICAL GAS WATER SOLAR MARINE SERVICES General manufacturing program We are pleased to present you our company which, since its foundation, is dedicated to the production
More informationMetal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression Fittings and Instrumentation
More informationAveraging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA WHAT IS A TORFLOW? TheTORFLOW is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
More informationTUBE FITTINGS INSTRUMENTATION.
TUBE FITTINGS INSTRUMENTATION www.unilok.com We, Uni-Lok corporation, have distinguished ourselves in the design and manufacturing of a high performance Twin Ferrule Compression and Instrumentation Valves
More informationBetabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
More informationAston Fittings. Manufacturing Ltd. machining. valves. fittings. pipe & tube. instrumentation packages
Aston Fittings Manufacturing Ltd. machining. valves. fittings. pipe & tube. instrumentation packages Intrumentation Pachages Aston are manufacturers and suppliers of Valves, Fittings, Flanges, ube and
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationPipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationINTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
More informationDOUBLE FERRULE FITTINGS FLUID CONTROLS PRIVATE LIMITED
DOUBLE FERRULE FITTINGS FLUID CONTROLS PRIVATE LIMITED INTRODUCTION Fluid Controls Double Ferrule Compression Tube Fittings provide leak proof torque free seals at all tubing connections. They eliminate
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationReamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:
More information10 Series Tube Fittings and Tubing
0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade
More informationGriplok. Tube Fittings. Quality Instrumentation Fittings
ube ittings Quality Instrumentation ittings ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass and carbon
More informationDuplex Steel & Engineering Company
+91-8048601907 Duplex Steel & Engineering Company https://www.duplexsteel.net/ Incorporated in the year 1996, we at Unisteels and Engg. Co. Pvt. Ltd. are engaged in exporting, supplying variety of Super
More informationASSEMBLY 7 BITE TYPE FITTINGS. check the direction of sleeve. assemble the NUT with hand. apply the oil to the inside and outside of Body.
ese excellen proucs assemble wi specially ea reae sleeves an boies mae from low carbon seel(s0c o S25C)o preven leaks. ese fiings are available wi various en sizes. Working Pressore 25MPa JIS B235- AFX
More information+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
More informationValves For Cryogenic Applications
Valves For Cryogenic Applications Red Dragon has been supplying specialist valve products to all industries for over 20 years and we are proud of our reputation for service, quality and speed of delivery.
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More informationApplicable Tubing. Tubing material Tubing O.D. Specifications. Fluid Air/Water (1) Operating pressure range (2) Principal Parts Material
Flame Resistant (Equivalent to UL-94 Standard V-0) FR One-touch Fittings KR-W2 Series RoS Guide Collet Chuck ccepts nylon. Large retaining force. he chuck provides secure retention and the collet increases
More informationValve Built-in self-seal mechanism. Air does not exhaust after removal of tubing. Stopper Cushion. Release button(blue) Guide Collet Chuck
O-ring O-ring Retainer Spring One-touch fitting (built-in self-seal mechanism) to prevent air exhaust when removing tube. Best for multiple use areas when pressure cannot be shut down. types are available.
More informationInstrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationCEPEX PLASTIC VALVES EXTREME SERIES
CEPEX PLASTIC VALVES EXTREME SERIES Technical Product Presentation Cepex presentation Cepexis one of the leading European (Spanish) manufacturers of plastic valves and fittings. For more than 30 years
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationInstrumentation & Piping Products Monoflange & up to 2" Full Bore DBB Valves
Instrumentation & Piping Products Monoflange & up to 2" Full ore D Valves (Up to and including 15,000 psi / 1035 bar) Innovative and Reliable Valve Solutions Monoflange Ordering Information NV Order Code
More informationGO WITH THE FLOW! PRODUCT GUIDE TITAN FLOW CONTROL, INC. TITAN TELEPHONE: YOUR PIPELINE TO THE FUTURE!
TITAN 290 CORPORATE DRIVE LUMBERTON, NC 28358 WWW.TITANFCI.COM TITAN@TITANFCI.COM 910.735.0000 TEL 910.738.3848 FAX TITAN FLOW CONTROL PRODUCT GUIDE GO WITH THE FLOW! TITAN FLOW CONTROL, INC. YOUR PIPELINE
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationCopper & Copper Nickel. Pipes Fittings Flanges.
Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS
More informationProducts Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
More informationbut this affects the load rating - please ask for more information. Please refer to our technical information pages when specifying and/or using.
Double Swivel Shackle Nuts female Lifting Bolts & Shackles 4010 Material High tensile steel, strength class >8. Supplied with CE certificate. Technical notes Designed to be used directly with the hook
More informationDOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
More informationFLANGES FLANGES.
FANGES FANGES 26 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200,
More informationDouble Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
More informationYl)HAl STrrl (INDIA) Forged High Pressure Pipe Fittings. All ISO 9001:2003/ ISO 14001:2004 / 8S Ol!SAS 18001:2007 / PED Al'PROl'ED 97/23/EC
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Summary : Type 1. Elbow, Tee, Cross, Couplin g, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage 2. nipple, Bull
More informationOUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves
Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,
More informationgyrolok Gyrolok Tube Fittings
yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationPERFECTION IS OUR STANDARD...
PERFECTION IS OUR STANDARD... WELCOME TO COLSON X-CEL LTD Providing Precision engineering solutions for the most demanding environments Colson X-Cel Ltd is a well established and most highly respected
More informationGYROLOK. Tube Fittings
ube ittings Index YROOK itting ocator 2-7 YROOK eatures & enefits 8 YROOK esign 9 ow to Order 10 Pipe hread Information 11 S ittings Information 11 YROOK itting imensional & pplication ables 12 Replacement
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationPRODUCT DIRECTORY OUR GENIUS IS FITTINGS. Issue 1. Nickel Plated Brass BSP Fittings. Compression Fittings
Issue 1 PRODUCT DIRECTORY Compression Fittings Sistem-P Push-in Fittings Compact Push-in Fittings Nickel Plated Brass BSP Fittings Air Valves Silencers Tubing OUR GENIUS IS FITTINGS www.wadefittings.com
More informationDigital Catalog. Operation can be made from the toolbar at the center of the lower portion of the screen.
Digital Catalog Click here to display the contents. Click here to download the PDF file. Operation can be made from the toolbar at the center of the lower portion of the screen. O-ring O-ring Retainer
More informationExcel Metal & Engg Industries
+91-8048077466 Excel Metal & Engg Industries https://www.excel-metal.com/ We are one of the eminent & influential manufacturer, exporter & trader of an exclusive assortment of the products to our valued
More informationForged High Pressure Pipe Fittings
Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Pressure Class Socket Weld Forged Fittings Products Dimension Specifications Pressure Class Threaded Forged Fittings Products Dimension
More informationSTAINLESS STEEL TUBE FITTINGS, VALVES AND TUBING HAITIMA CORPORATION HAITIMA CORPORATION. http : //
SINLSS SL HIIM CORORION http : //www.haitima.com.tw -mail : haitima@seed.net.tw aiwan Head Office 8., No.201, Sec. 2, iding Blvd., Neihu District, aipei City 114, aiwan R.O.C. L: +886-2-2658-5800 X: +886-2-2658-2266
More informationW Range Solder Ring Fittings
//7 TECH DATA SHEET 49 W Range Solder Ring Fittings Size Pk Pk Code MERCIA W RANGE SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are
More informationCRYOGENIC. Italian Manufactured, Italian Quality
Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationInstrumentation Products. E Series Valves and Manifolds
Instrumentation Products E Series Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation Valves
More informationStainless Steel Tubular Fittings Ultrahigh-Purity and Chemically Cleaned and Passivated
www.swagelok.com Stainless Steel ubular Fittings Ultrahigh-Purity and Chemically Cleaned and Passivated Sizes from 1/4 through 4 outside diameter Metric sizes available upon request 316L stainless steel
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More informationFerulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
More informationSOLDER RING FITTINGS GENERAL RANGE
Product Guide Size Pk Pk Code SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold
More informationClean Fittings. No.06-2 August 2015
Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong
More informationINTER PLANT STANDARD IN STEEL INDUSTRY SPECIFICATION OF HYDRAILIC HOSE ASSEMBLY & END FITTING FOR HYDRAULIC LINES
INTER PLANT STANDARD IN STEEL INDUSTRY IPSS SPECIFICATION OF HYDRAILIC HOSE ASSEMBLY & END FITTING FOR HYDRAULIC LINES IPSS: 1-02-007-18 (First Revision) Corresponding IS does not exist Formerly: IPSS:
More informationINDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationPlug: KBP Elbow module: KBV Female connector union: KBH. Tubing. Guide. Chuck Collet. O-ring Lock ring. Spring Spring guide. Specifications.
Piping Module Series KB RoHS Plug: KBP Elbow module: KBV Female connector union: KBH Lock ring Plug body hread Spring Spring guide Release button (blue) Seal Stud Universal elbow body ubing Guide Chuck
More information18D according to ATEX
Pneumatic ressure switch -... bar Hydraulic ressure switch 5... 4 bar For EX-alications according to ATEX 00 a: Zone 2 category ATEX 3G (gases) Zone 22 category ATEX 3D (dust) TÜV (technical insection
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationMonoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
More informationCOMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 HROUGH 2 -INCH, 2 MM HROUGH 50 MM-MERIC LE-LOK UBE FIINGS ESCRIPION he HM-LE GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications since its establishment
More informationCertificate of Type Approval (RQS)
Date Issued: 18/OCT/2000 Certificate Number: 00-C15300-X Certificate of Type Approval (RQS) This is to certify that Swagelok Company has met the requirements of ABS Product Type Approval for Swagelok Tube
More informationThe Fast-track. valves. manufacturer for valves
The Fast-track valves manufacturer for valves Introduction The valves are intended for a wide range of applications, such as oil and gas, chemical, petrochemical, energy and process industry. BSM Valves
More informationconnection solutions in stainless steel
connection solutions in stainless steel www.legris.com egris onnectic offers many solutions in stainless steel that are designed for excellent resistance to aggressive / corrosive environments and fluids.
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More informationCOUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED
Wade COUPLINGS, VALVES AND TUBING DELTA FLUID PRODUCTS LIMITED DELTA FLUID PRODUCTS LTD Delta Fluid Products have been associated with the manufacturing of Valves and Fittings for Fluid and Gases for over
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationElectrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
More informationCompac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationStop valves SVA-S and SVA-L
MAKING MODERN LIVING POSSIBLE echnical brochure Stop valves SVA-S and SVA-L SVA Stop Valves are available in angleway and straightway versions and with Standard neck (SVA-S) and Long neck (SVA-L) he stop
More informationMetrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
More informationFITTINGS COUPLINGS BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE
BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 139 HOSES Bauer Type B Couplings
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationQuality Valve Manufacturer
Quality Valve Manufacturer ABOUT US OVERVIEW Australian Pipeline Valve (APV) was established in 1989 as a specialist manufacturer of quality valves and pipeline products. Australian Pipeline Valve s reputation
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationSemiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
More informationThe intelligent stainless steel stock range. Stainless, highly corrosion and heat resistant steels
The intelligent stainless steel stock range Stainless, highly corrosion and heat resistant steels A material grade makes history. Even at the end of the 19th century it was discovered that the corrosion
More informationWWW.MAKO-RODUCTS.NET 03 07 10 19 Diaphragm Valve 12 DV1 Series 13 DV1 Series 14 BDV1 Series 15 BDV1 Series 16 HDV1 Series Bellows Valve 17 BV1 Series 18 BV1 Series 19 BV2 Series 20 BV2 Series 21 BV3 Series
More informationELITE FLANGES STEEL FLANGES INDEX
STEEL S INDEX S LASS 50 (PN20) to LASS 2500 (PN 420) Welding Neck, Slip-on, Threaded, Socket Welding Lap Joint, Blind...Page 35 REDUING S Welding Neck, Threaded, Slip-on...Page 7 ORIFIE S LASS 300-500
More information