ELECTRICAL ENGINEERING. Keramik-Metall-Verbindungen ELECTRICAL ENGINEERING. Feedthroughs, Tube-To-Tube Insulator, Standoffs
|
|
|
- Lizbeth Leonard
- 5 years ago
- Views:
Transcription
1 EECTRICA ENINEERIN eramik-metall-verbindungen EECTRICA ENINEERIN Feedthroughs, Tube-To-Tube Insulator, Standoffs
2 SINE TERMINA FEEDTHROUHS Voltage (DC) Ø M Ø D Ø F Ø J 1 Product No. ØM 4 kv M4 1, kv M6 2, kv M6 2,5 10, kv M8 3,8 13,5 6, Fe 13 1 SINE TERMINA FEEDTHROUHS Voltage (DC) Conductor Current Ø D Ø F 1 2 Product No kv NiFeCo 4 A 1,5x0, kv NiFeCo 5 A 1, kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 5 A 1, kv Cu 15 A 1, kv Ni42 8 A kv Cu 25 A kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 12 A kv Cu 40 A kv Ni42 20 A 4 10, kv Cu 60 A 4 10, kv Ni42 25 A 5 13, kv Cu 80 A 5 13, kv Cu 120 A 8 19, FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range
3 SINE TERMINA FEEDTHROUHS Voltage (DC) Conductor Current Ø D Ø F Ø 1 2 Product No. 1 kv Ni42 4 A 1,5x0,25 4 2,8 35 4, kv Ni42 5 A 1,5 4 2,8 35 4, kv Cu 5 A 1,5 4 2,8 35 4, kv Ni42 30 A 7,5x0, kv Cu 90 A 7,5x0, Ø 1 2 SINE TERMINA FEEDTHROUHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 1 2 Product No. 25 kv 3 54 M6 2, This feedthrough could be adjusted with different conductors for special electrical standards ØM Fe 10,4 2 1 Ø13 1 FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range 07
4 EECTRICA ENINEERIN eramik-metall-verbindungen EECTRICA ENINEERIN Feedthroughs, Tube-To-Tube Insulator, Standoffs
5 SINE TERMINA FEEDTHROUHS Voltage (DC) Ø M Ø D Ø F Ø J 1 Product No. ØM 4 kv M4 1, kv M6 2, kv M6 2,5 10, kv M8 3,8 13,5 6, Fe 13 1 SINE TERMINA FEEDTHROUHS Voltage (DC) Conductor Current Ø D Ø F 1 2 Product No kv NiFeCo 4 A 1,5x0, kv NiFeCo 5 A 1, kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 5 A 1, kv Cu 15 A 1, kv Ni42 8 A kv Cu 25 A kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 12 A kv Cu 40 A kv Ni42 20 A 4 10, kv Cu 60 A 4 10, kv Ni42 25 A 5 13, kv Cu 80 A 5 13, kv Cu 120 A 8 19, FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range
6 SINE TERMINA FEEDTHROUHS Voltage (DC) Conductor Current Ø D Ø F Ø 1 2 Product No. 1 kv Ni42 4 A 1,5x0,25 4 2,8 35 4, kv Ni42 5 A 1,5 4 2,8 35 4, kv Cu 5 A 1,5 4 2,8 35 4, kv Ni42 30 A 7,5x0, kv Cu 90 A 7,5x0, Ø 1 2 SINE TERMINA FEEDTHROUHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 1 2 Product No. 25 kv 3 54 M6 2, This feedthrough could be adjusted with different conductors for special electrical standards ØM Fe 10,4 2 1 Ø13 1 FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range 07
7 SINE TERMINA FEEDTHROUHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 1 2 Product No. Fe M kv M8 3,8 88, , Order-related manufacture This feedthrough could be adjusted with different conductors for special electrical standards Ø36 1 MUTITERMINA FEEDTHROUHS Voltage (DC) Current Ø D Ø A Ø Ø J 1 2 No. of Feedthroughs Product No. Ø 500 V Pin-Pin 4 A 1,5x0, ,2 15, kv Pin-Flange Order-related manufacture Feedthrough are also available in other dimensions ØM 2 1 5x FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range
8 MUTITERMINA FEEDTHROUHS Voltage (DC) Current Ø D Ø F Ø J 1 2 No. of Feedthroughs Product No. 500 V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J Product No. 5 kv 8x6 13, Tube-To-Tube Insulator is also available in other dimensions (NiCo2918) (NiCo2918) 8 TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions (CrNiFe) FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range 09
9 TUBE-TO-TUBE INSUATORS Voltage (DC) No. of Flutes eakage Path Ø F Ø A Ø J Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 15 kv Standoff is also available in other dimensions Ø14 M FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range
10 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 40 kv Customized parts with different lengths, different diameters or different number of flutes are also available Ø14 M6 1 1 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 10 kv 25 7, kv 38 9, Standoffs are also available in other dimensions (Cu) (Cu) 1 M3 FRIAIT -DEUSSIT High Performance Ceramics - Standard Product Range 11
ELECTRICAL ENGINEERING. Ceramic-Metal Assemblies ELECTRICAL ENGINEERING. Feedthroughs, Tube-To-Tube Insulator, Standoffs
EECTRICA ENINEERIN Ceramic-Metal Assemblies EECTRICA ENINEERIN Feedthroughs, Tube-To-Tube Insulator, Standoffs Voltage (DC) Ø M Ø D Ø F Ø J K 1 Product No. ØM 4 kv M4 1,6 7 3 8 15 41 10 551-1001 6 kv M6
Weldable ISO KF Thread. ConFlat Ø.75 [19.1] Ø.062 [1.6] Ø2.73 [69] 1010/1020 CRS Conductor 1-14 Thread Ø1.12 [28.6] 96 [2440] Ø.27 [6.
![Weldable ISO KF Thread. ConFlat Ø.75 [19.1] Ø.062 [1.6] Ø2.73 [69] 1010/1020 CRS Conductor 1-14 Thread Ø1.12 [28.6] 96 [2440] Ø.27 [6.](/thumbs/89/100758561.jpg "Weldable ISO KF Thread. ConFlat Ø.75 [19.1] Ø.062 [1.6] Ø2.73 [69] 1010/1020 CRS Conductor 1-14 Thread Ø1.12 [28.6] 96 [2440] Ø.27 [6.")
A.8 New Feedthrough to 50 KV* / 10 Amps 40 KV 50 KV Ø.75 [19.1] 3/4-16 Thread 1.94 [49.1] 1.94 [49.1] 1.25 [31.8] 1.13 [28.6].015±.003 [0.4] KOVAR 1.03 [26.0] Ø.75 [19.1].37 [9.4] Ø.995±.002 [25.3].37
FRIALIT -DEGUSSIT Oxide Ceramics High Temperature Technology
FRIAIT -DEGUSSIT Oxide Ceramics Tubes, Rods, Multi-Bore Tubes, Crucibles, Plates, Boats, Combustion Trays and Grinding Pieces TUBES DEGUSSIT A23 one end closed DEGUSSIT A23 both ends open Ø D Ø d ength
Document #: DOC_PRD-1002 Origination Date: 8/22/07. Rev: Revision Date: Signature: Title: MHV & SHV High Voltage Test Procedure
Title: MHV & SHV High Voltage Test Procedure Scope: This document describes the test procedure and results for the voltage rating verification of the coaxial MHV and SHV style high voltage connectors and
BNC and MHV SHV-5 and SHV-10 SHV-20 and SHV-B
Coaxial is the description for electrical feedthroughs with parallel and concentric conductor paths, and with the inner most conductor path electrically isolated from the vacuum flange. Grounded Shield
Design and Testing of a High Voltage Feedthrough for Extending IEC Operations to 300 Kilovolts
Design and Testing of a High Voltage Feedthrough for Extending IEC Operations to 300 Kilovolts Aaron N. Fancher Matt K. Michalak, Gabriel E. Becerra*, Gerald L. Kulcinski University of Wisconsin Madison,
Installation cable, PVC insulated. Characteristics Properties Unit. Power cables < 1 kv House wiring cable
According to VDE 0250 part 204 Characteristics Properties Unit Group Power cables < 1 kv Class House wiring cable Type material Cu, bare minal cross section conductor mm² Low smoke (acc. EN 61034-2) Diameter
Compression cable lugs and compression joints according to DIN
Compression cable lugs and compression joints according to DIN Tubular compression cable lugs Cu DIN 4635. Angle compression cable lugs Cu.4 Compression cable lugs with two long holes in the palm.8 Compression
Technical attributes
Technical attributes Standards adapted to DIN VDE 0281 Conductor material Cu, bare Conductor type flexible Conductor standard IEC 60228 Conductor category 5 Core insulation Core s black, number-coded,
Tubular compression cable lugs 6 35 mm 2, DIN material: Cu according to DIN EN surface: tin plated or optionally uncoated
Tubular compression cable lugs 6 35, DIN 6235 material: Cu according to DIN EN 13600 surface: or optionally * not standardized, tube measurements in accordance with DIN 6235 6 5 1021 5 3,7 5,5 5,3 8,5
90 Series - Socket overview for 60 series relays
90 Series - Socket overview for 0 series relays See page 90 90.0 99.0 90.0 0. Screw terminal (Box clamp) socket Panel or mm rail - Coil indication and EMC 90.0 0. Double terminal (EN 00) mount suppression
Screw-in melt thermocouples
JUMO Instrument Co. td. Data sheet 901090 Page 1/5 k Temperature range from -40... +600 C k Available with different thermocouples k Stainless steel thermowell and probe tip k Structure insulated or connected
BY Series 4 Tumbler Value Added Security Switchlocks
4 Tumbler Value Added Security s Features/Benefits Anti-static switch Removable lock core atch pawl option Snap-together assembly Typical Applications Computers Point-of-sale terminals Postal equipment
High temperature sensors
Certificata IO 92 EI s.r.l. - via Milano, 11-22 ainate (MI) Tel.: (2) 937868 / 937342 - Fax: (2) 9371724 Home page: www.elsi.it e-mail: info@elsi.it High temperature traight thermocouple M1 with ceramic,
hotrod Cartridge Heaters
hotrod Cartridge Heaters hotrod Cartridge Heaters Components We provide our customers with an extensive portfolio of ments, thermal sensors and control technology. Since 1973, we have manufactured heating
N, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
H Series 4 & 6 Tumbler Power Switchlocks
4 & 6 Tumbler Power s Features/Benefits Positive detent Multi-pole and multi-position Snap-together assembly Power switching Typical Applications Machine controls Elevators Models Available Specifications
n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
PCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
JUMO safetym TB/TW Temperature limiter, temperature monitor according DIN EN
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Mini-F: A Small Plasma Focus Device
Mini-F: A Small Plasma Focus Device Steve Hansen I. INTRODUCTION Those who have followed this publication know of my fondness for coaxial plasma guns. I constructed my first gun sometime around 1972 and
Manual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
PA Series Sub-Miniature Pushbutton Switches
Sub-Miniature HOW TO ORDER SPECIFICATION: MAX. CURRENT/VOTAGE RATING WITH RESISTIVE OAD: 400mA 32VAC-100mA 50VDC-125mA 125VAC 500mA 48VAC - 200 ma 50VDC - 200mA 250VAC for metal material. INITIA CONTACT
Manual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
ELECTRONIC MONITORING SYSTEMS AND TEMPERATURE SENSORS
JJ Electronic digital thermometer JJ Temperature sensors JJ KombiTemp JJ CargoTemp roller JJ Display and monitoring systems ELECTRONIC MONITORING SYSTEMS AND TEMPERATURE SENSORS DS_Electronic_monitoring_systems_and_temperature_sensors
Electronic Monitoring Systems
JJ Electronic digital thermometer JJ Multi-channel temperature indicator JJ Temperature sensors JJ KombiTemp Electronic Monitoring Systems and Temperature Sensors DS_Electronic_monitoring_systems_and_temperature_sensors
MANUALLY OPERATED CHANGEOVER SWITCHES
are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMA/EMERGENCY Application: UPS,
Manual motor starter MS132
Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less
PVGard 600 and 1000 Vdc solar photovoltaic circuit breakers
Supersedes October 2013 photovoltaic circuit breakers Contents Description Page Product description........................ 1 PVGard 600 Vdc........................... 2 Technical data...........................
hotrod Cartridge Heaters Application Fields
For heating applications: - Packaging machines - Extruders - Casting machines - Hot melt - Cutting knives - Analytical equipment in laboratories Custom options: - Power distribution - Numerous attachments
CREATIVE EQUIPMENT CC 18 Main Road, Fishers Hill, Germiston, 1401 Tel: Fax:
Page 1 of 6 FROM SERIAL NR 7213200000 TO 7213205371 21 4201.079 POWER CORD 1 4201.000 TANK COMPLETE 22 4290.047 LOCKNUT NYLON 2 4260.006 FUEL GAUGE 23 4290.046 STRAIN RELIEF BUSHING 3 4290.026 TANK FILTER
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel construction and have compact cylinders without tie-rods.
9.01 ROTARY JOINTS. Valvoind. valvole industriali. VALVOIND Srl Via Pascoli, Bagnatica (Bergamo) Tel Fax. 035.
9.01 ROTARY JOINTS VAVOIND Srl Via Pascoli, 5-24060 Bagnatica (Bergamo) Tel. 035.681919 Fax. 035.684461 9.02 ROTARY JOINTS SEF-SUPPORTED GRAPHITE VAVOIND Srl Via Pascoli, 5-24060 Bagnatica (Bergamo) Tel.
Series 250 Pneumatic Control Valve Type and Type High Pressure Valve Type 3252
Series 250 Pneumatic Control Valve Type 3252-1 and Type 3252-7 High Pressure Valve Type 3252 Application Control valve used control small flow rates in process engineering Nominal size G 1 2 1 NPT 1 2
DEXEN INDUSTRIES Inc. GENERAL CATALOG. DEXEN INDUSTRIES Inc.
DEXEN INDUSTRIES Inc. GENERAL CATALOG DEXEN INDUSTRIES Inc. 6003 GAS VALVES 6003-series gas valve is an effective and reliable gas valve for low-btu gas product and application. The product is most commonly
LIGHTNING EQUIPOTENTIAL BONDING ISOLATING SPARK GAPS. EXFS L / EXFS KU for explosive Areas
EXFS L / for explosive Areas For indirect connection/earthing of functionally separate system parts at lightning strikes Unit for lightning equipotential bonding according to IEC 61024-1 for hazardous
Temperature measurement
Temperature measurement 2 Example of connections of particular elements Temperature display units BGK85 Option Computer, control, itp. Temperature measurement TFC TFL Temperature regulator BGK81 BGK84
Size Range. Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in. Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in. Hot Worked: 20 mm 450 mm 0.75 in 17.
Bar Size Range Cold Drawn: 6.35 mm 88.9 mm 0.25 in 3.5 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 6.35 mm 35 mm 0.25 in 1.25 in Hot Worked: 20 mm 450 mm 0.75 in 17.7165 in Cold Drawn: 15
Electronic Monitoring Systems
JJ Electronic digital thermometer JJ Multi-channel temperature indicator JJ Temperature sensors JJ KombiTemp Electronic Monitoring Systems and Temperature Sensors DS_Electronic_monitoring_systems_and_temperature_sensors
Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water
Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic
600 A CURRENT LEADS WITH DRY AND COMPACT WARM TERMINALS
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics Large Hadron Collider Project LHC Project Report 605 600 A CURRENT LEADS WITH DRY AND COMPACT WARM TERMINALS T.P. Andersen
Self-Priming Pumps. Characteristic curves for suction lift Hs = 1 m. n 2900 rpm. H m. H m 50 Q 3
www.calpeda-romania.ro 7..9 www.pompe-calpeda.ro 7.79. Construction Close-coupled self-priming shallow well jet pumps with built-in ejector. NG: version with pump casing and lanter bracket in cast iron.
Industrial Contactors CTX 3 3P 185A - 800A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Industrial Contactors CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Installation - Connection...
N2XR(AL)Y 1 x (25-800) mm² 0.6/1 kv
N2XR(AL)Y 1 x (25-800) mm² 0.6/1 kv N2XR(AL)Y 1 x (25-800) mm² 0.6/1 kv Cu / XLPE / AWA / PVC (, XLPE Insuled, Aluminium Wire Armor, ed) 25 16.6 503 35 17.7 612 50 19.5 783 70 21.5 1,014 95 23.5 1,280
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
45 YEARS OF EXPERIENCE
ENGINE CONNECTORS 45 YEARS OF EXPERIENCE High Performance Connectors for Critical Environment Temperature Up to 350ºC / 662ºF Vibrations Fire Corrosion 45 YEARS OF EXPERIENCE OLD PRODUCTS DBA 3x NEW GENERATION
KombiTemp. Head form B / Head form J Cable socket, angle type Diesel engine dial thermometers. Temperature Sensors with local display
JJ Head form B / Head form J JJ Cable socket, angle type JJ Diesel engine dial thermometers KombiTemp Temperature Sensors with local display Including products with: DS_KombiTemp 8/5 Dual temperature control
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 107 The JAMESBURY brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 107 are manual assemblies consisting of the JAMESBURY FIRE-TITE
PSG5xx ATM to Medium Vacuum Gauge
The INFICON Standard Gauges,,, PSG510- S and, employ the most advanced digital technology available in themarketplace. The rugged stainless steel sensor cell and compact design qualifythem for use on semiconductor
N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv
N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv (Copper, XLPE Insulated, Copper Tape,, PVC Sheathed) 25 38.5 2,603 35 41.5 3,074 50 44.5 3,641 70 48.5 4,536 95 52.0 5,542 120 56.0
PN [ ] D7150NL/BAC D7200WL/BAC D7250WL/BAC D7300WL/BAC [ ]
![PN [ ] D7150NL/BAC D7200WL/BAC D7250WL/BAC D7300WL/BAC [ ]](/thumbs/91/105373169.jpg "PN [ ] D7150NL/BAC D7200WL/BAC D7250WL/BAC D7300WL/BAC [ ]")
Technical data sheet D7../C utterfly valve with actuator, Flange, P 16 Torque motor 160 m ominal voltage C 24...240 V / DC 24...125 V Control Open-close, modulating, communicative for mixing and diverting
Development of Full-size Mockup Bushing for 1 MeV ITER NB System
1 ITR/P1-15 Development of Full-size Mockup Bushing for 1 MeV ITER NB System H. Tobari 1), T. Inoue 1), M. Hanada 1), M. Dairaku 1), K. Watanabe 1), N. Umeda 1), M. Taniguchi 1), M. Kashiwagi 1), H. Yamanaka
CF Components. Introduction. Functional principle 1-45
Introduction The generation of ultra high vacuum (UHV) makes great demands on the material and on the connections. Therefore the CF standard was created in the UHV technology (ISO 3669; enhancement ISO/TS
UHV FEEDTHROUGHS PFI PT1K 1 K CF PFI PT1C 1 C CF PFI
Liquid and electrical feedthroughs are manufactured according to the most UHV process. Careful checking and packaging secure a high reliability and allow being ready to use just after unpacking without
MIG/MAG welding torches
Simplify your life The 3 main considerations when choosing a MIG/MAG torch are: Reliability: WELDLINE WMT2 torches have been designed to meet the rigorous demands of today s welding environment, giving
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
ACTIVELINE GAUGES. The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field.
ACTIVELINE GAUGES The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field. ACTIVELINE GAUGES The new ActiveLine PKR and IKR gauges. Compact, durable
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
A Resource for Semiconductor Manufacturers Illustrated Parts Guide for Axcelis GSD 200E² 160V
Illustrated Parts Guide for Axcelis GSD 00E² 0V GSD Water Cooled & Non-Water Cooled Bushing and Liner Flange Upgrades Pgs. - Source Body Components Non-Vaporizer / Vaporizer Pgs. -0 Extraction Electrode
Illustrated Parts Guide for Quantum II / III Source
Illustrated Parts Guide for Quantum II / III Source End Station, Pgs.-0 Source Assembly Pgs.- Flight Tube / MRS Assembly Pg. Plasma Flood Assembly Pg. Extraction Assembly Pg. PO Box Leander, TX USA -0
Power Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
Battery powered crimping tool
www.klauke.com Battery powered crimping tool, Series New: E 0/-L by lauke Verbindungen mit System The Power of Partnership Für auswechselbare Einsätze der Serie 22, Schmalpressung Crimping and cutting
IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector
www.chardongroup.com IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector Application Chardon Front T-Body / Coupling (Rear) T-Body connectors are fully
Cartridge Heaters. Application Field. Application examples
artridge Heaters pplication examples Injection moulding - Internal heating of zzles Hot runner systems - Heating of manifolds Packaging industry - Heating of welding bars Packaging industry - Heating of
Technical Specification
Technical Specification MM Series Pulse Jet Valves MM Series Description Very high performance diaphragm valve designed to be mounted directly into the compressed air manifold. 1" and 1.5" models are supplied
ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves
ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves Pilot Operated 316L Stainless Steel Bodies 1/4" NPT 3/2 Features Ideal for oil and gas control panel applications Drop-in
Fuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
N2XSEBY 3 x (25-300) mm² 3.6/6 kv
N2XSEBY 3 x (25-300) mm² 3.6/6 kv N2XSEBY 3 x (25-300) mm² 3.6/6 kv (Copper, XLPE Insulated, Copper Tape,, PVC Sheathed) 25 38.5 2,417 35 41.0 2,865 50 44.0 3,391 70 48.0 4,272 95 51.5 5,266 120 55.5 6,232
GUNMETAL BRONZE LEADBRONZE ALUMINIUMBRONZE Bars and tubes in bronzealloys
page 1 GUNMETAL BRONZE LEADBRONZE ALUMINIUMBRONZE Bars and tubes in bronzealloys EN 1982: Gunmetal Bronze Leadbronze Rund bars - continuous cast.................................... page 2 Spuare bars -
Linea - Line. raccordi a compressione compression fittings
5300 Linea - Line raccordi a compressione compression fittings Raccordi a compressione/ Compression fittings SYSTEM FIELDS OF APPLICATION Mainly used in distribution systems for drinking water, sanitary
Industrial flue gas probes. Instruction manual
Industrial flue gas probes Instruction manual 2 1 Contents 1 Contents 1 Contents... 3 2 Safety and the environment... 4 2.1. About this document... 4 2.2. Ensure safety... 4 2.3. Protecting the environment...
Compression cable lugs and compression joints according to DIN
Compression cable lugs and compression joints according to DIN Compression cable lugs Al.2 Compression cable lugs AL-St / Bi-metallic washers (cupal).4 Bi-metallic compression cable lugs.5 Compression
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Current transformers. Current transformers
Current transformers Current transformers Moulded case current transformer Moulded case CT, class 1 and 0.5 / 5 A Increased reliability Both halves of the housing overlap rather than butting up against
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT
3-Way Lead Free Brass Ball Valves Full Port, L or T Flow Path, 400 PSI CWP 1/4 to 2 NPT SERIES Features FULL PORT 3-way L or T flow path Functions as a diverter, selector or mixing valve Four ball seat
400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS
MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium
AV 23 Balancing valves SETTER Inline
AV Balancing valves SETTER Inline Application Direct reading and balancing valve with visual flow indication. Correct balancing of circuits ensure optimum efficiency of the system and can therefore help
Motorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
SECTION 7: MINIATURE SENSORS
SECTION 7: MINIATURE SENSORS Embedment sensors install in bearings for over-temperature protection Small, rugged RTDs and thermocouples withstand rough handling and harsh environments Certified non-sparking
TEC.MO. Plasma Torches & Consumables THERMAL DYNAMICS PCH-25/26/28/38 PCH/M-35/40. Compatible parts suitable for: Thermal Dynamics
TEC.MO. PCH-/// PCH/M-/0 0 a -0 00 0 Torch head -0 00 0 Torch head a -0 00 0 Torch head ns - 0 Machine handle -0 000. O-Ring 00 Handgrip with microswitch -00 /D Electrode -00 Electrode OEM style -00 000
B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data
B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1
Power distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
Fuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
Power Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies
Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:
Aluminum Capacitors +85 C, Large Can
Aluminum Capacitors +85 C, arge Can FEATURES Useful life: 2000 h at +85 C The industry standard for large can aluminum capacitors Ideal for high wattage power supplies and energy storage applications Capacitance
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
600 C series Platinum sensor with wires For high temperatures
W 600 C series Benefits & Characteristics Excellent long-term stability Low self-heating Fast response time Small dimensions Vibration and temperature shock resistant Paired sensors available 1/5 IEC and
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
NHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
VP RP BP GP HALOGEN FREE INSULATED TERMINALS. P range funnel entry OPERATING TEMPERATURE UP TO 115 C
VP RP P GP HAOGEN FREE INSUATED TERMINAS P range funnel entry OPERATING TEMPERATURE UP TO 115 C The P range of terminals has been designed, to meet the increasing demands for improved safety and reliability
Vacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Optimising controls 458 459 Optimising controls Introduction...460 Vacuum switches...462 Valves...478 Regulators...488 Automatic energy
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
Application Datasheet
Application Datasheet Standard Designation for Cast s C83300-C83999: -Tin-Zinc and -Tin-Zinc-Lead s (Red and Leaded Red es) C84000-C84999: -Tin-Zinc and -Tin-Zinc-Lead s (Semi-Red and Leaded Semi-Red es)
MK 2/ mm 2 IEC UL CSA. IEC UL CSA Rated voltage AWG AWG AWG AWG Rated surge voltage / pollution severity
or direct mounting Screw connection MK 2/12 2.5 mm 2 MK 3/2... 12 2.5 mm 2 Width x height / ø fixing hole mm 15.0 x 15.0 / 3.20 15.0 x 16.1 / 3.45 (length and mounting size: see order data) Max. clamping
Open Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
Cable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 Applications For direct installation into the process Machine building Motors Bearings Pipelines and vessels Special