UHV FEEDTHROUGHS PFI PT1K 1 K CF PFI PT1C 1 C CF PFI
|
|
|
- Emory Russell
- 5 years ago
- Views:
Transcription
1 Liquid and electrical feedthroughs are manufactured according to the most UHV process. Careful checking and packaging secure a high reliability and allow being ready to use just after unpacking without any risk for your installation. Electrical and thermocouples feedthroughs: They enable current transfer or temperature reading into a vacuum chamber. As a standard we offer feedthroughs on CF flanges (KF flanges available on request). Of UHV design they are bakeable up to 400. Summary of electrical feedthroughs: ELECTRICAL FEEDTHROUGHS THERMOCOUPLE FEEDTHROUGHS Model Pins Voltage Current Reference Model Pair Type Reference (kv) (A) PFI PT1K 1 K CF PFI PT1C 1 C CF PFI PMI PT2K 2 K CF PMI PT2C 2 C CF PMI PMI PTEK 1 K CF PMI PTEC 1 C CF PMI PMI PMI PMI PMI PHI PHI PHI PHT PHT PHT PHT PMC PMC PMC PRF MHz PRF MHz PBNC PBNC PBNC PBNC PSUBD 9 9 Prise SubD PSUBD Prise SubD PSUBD Prise SubD VINCI TECHNOLOGIES Division MECA
2 LOW CURRENT FEEDTHROUGH - PFI Model PFI 5-4 PFI 5-6 PFI 5-10 Connectors Voltage (kv) Current (A) Reference MIDDLE CURRENT FEEDTHROUGH 25 A PMI 25 Model PMI 25-2 PMI 25-4 Connectors 2 4 Voltage (kv) 6 6 Current (A) CF 16CF Reference MIDDLE CURRENT FEEDTHROUGH 50 A PMI 5x Model PMI 51 PMI 52 PMI 53 PMI 54 Connectors Voltage (kv) Current (A) CF Reference VINCI TECHNOLOGIES Division MECA
3 MIDDLE CURRENT FEEDTHROUGH 100 A PMI 10x Model PMI 101 PMI 102 PMI 103 PMI 104 Connectors Voltage (kv) Current (A) CF Reference HIGH CURRENT FEEDTHROUGH - PHI Model PHI 301 Connectors 1 Voltage (kv) 8 Current (A) CF Reference Model PHI 302 Connectors 2 Voltage (kv) 8 Current (A) 320 Reference Model PHI 800 Connectors 1 Voltage (kv) 8 Current (A) 800 Reference VINCI TECHNOLOGIES Division MECA
4 HIGH VOLTAGE FEEDTHROUGH PHT (Connector included) Model PHT 1 Connectors 1 Voltage (kv) 15 Current (A) CF Reference Model PHT 2 Connectors 2 Voltage (kv) 15 Current (A) 7.5 Reference Model PHT 3 Connectors 3 Voltage (kv) 15 Current (A) 7.5 Reference Model PHT 4 Connectors 4 Voltage (kv) 15 Current (A) 7.5 Reference VINCI TECHNOLOGIES Division MECA
5 MULTI CONNECTORS FEEDTHROUGHS - PMC Model PMC 3 PMC 10 PMC 32 Connectors Voltage (kv) Current (A) Reference RF FEEDTHROUGHS - PRF Model PRF 1 Connectors 1 Frequency (MHz) Current (A) 100 A (12 kv) Reference Model PRF 2 Connectors 2 Frequency (MHz) Current (A) 100 A (8kV) Reference VINCI TECHNOLOGIES Division MECA
6 FEEDTHROUGHS BNC - PBNC Model PBNC 1 PBNC 2 PBNC 3 PBNC 4 Connectors Voltage (kv) 0.5 Current (A) 3.5 Reference FEEDTHROUGHS SUB-D - PSUBD Model PSUBD 9 PSUBD 15 PSUB D 25 Connectors Voltage 500 VDC Current 5 A 63CF 63CF Reference CONNECTORS FOR ELECTRICAL FEEDTHROUGHS Connectors for PMI 25 feedthroughs Connectors for PMI 5x feedthroughs Connectors for PMI 10x feedthroughs Connector for PHI feedthroughs VINCI TECHNOLOGIES Division MECA
7 1 CONNECTOR THERMOCOUPLE FEEDTHROUGHS PT1X Model PT1K PT1C Pair 1 Type K C Reference CONNECTOR THERMOCOUPLE FEEDTHROUGHS PT2X Model PT2K PT2C Pairs 2 Type K C Reference ELECTRICAL AND THERMOCOUPLE FEEDTHROUGHS PTEX Model PTEK PTEC Pair of thermocouple 1 Pair of elec. connectors 1 Type of thermocouple K C Voltage Current 5 kv 55 A Reference VINCI TECHNOLOGIES Division MECA
8 LIQUID FEEDTHROUGHS: MECA 2000 feedthroughs are designed for gas and liquid transfers in a range of temperature from -195 C t o 250 C. They are mainly used to cool or to heat chambers, cryopanels, fracturing devices, SINGLE LIQUID FEEDTHROUGH - CF16 SINGLE LIQUID FEEDTHROUGH DOUBLE LIQUID FEEDTHROUGH Model TF 16 Model TLN40S Model TLN 40D Connectors 1 Connectors 1 Connectors 2 16CF Reference Reference Reference VINCI TECHNOLOGIES Division MECA
BNC and MHV SHV-5 and SHV-10 SHV-20 and SHV-B
Coaxial is the description for electrical feedthroughs with parallel and concentric conductor paths, and with the inner most conductor path electrically isolated from the vacuum flange. Grounded Shield
All-metal angle valve Series 57
ll-metal angle valve Series 57 Main applications For vacuum processes with extreme UHV requirements and / or when using aggressive media Ordering information Valve with manual actuator hexagon head Valve
ANGLE/INLINE VALVE WITH SOFT-PUMP FUNCTION, SERIES 29.0/29.2
ANGL/INLIN VALV WITH SOFT-PUMP FUNCTION, SRIS 9.0/9. For pumping and venting of HV systems when few turbulences, particles, substrate movements and condensation are important. Resistant against differential
All-metal gate valve Series 48
ll-metal gate valve Series For extreme UHV and/or aggressive media Bakeable to 300 C in open and closed position Radiation resistant Maintenance-free up to 000 cycles Opening possible up to 1 bar differential
Weldable ISO KF Thread. ConFlat Ø.75 [19.1] Ø.062 [1.6] Ø2.73 [69] 1010/1020 CRS Conductor 1-14 Thread Ø1.12 [28.6] 96 [2440] Ø.27 [6.
![Weldable ISO KF Thread. ConFlat Ø.75 [19.1] Ø.062 [1.6] Ø2.73 [69] 1010/1020 CRS Conductor 1-14 Thread Ø1.12 [28.6] 96 [2440] Ø.27 [6.](/thumbs/89/100758561.jpg "Weldable ISO KF Thread. ConFlat Ø.75 [19.1] Ø.062 [1.6] Ø2.73 [69] 1010/1020 CRS Conductor 1-14 Thread Ø1.12 [28.6] 96 [2440] Ø.27 [6.")
A.8 New Feedthrough to 50 KV* / 10 Amps 40 KV 50 KV Ø.75 [19.1] 3/4-16 Thread 1.94 [49.1] 1.94 [49.1] 1.25 [31.8] 1.13 [28.6].015±.003 [0.4] KOVAR 1.03 [26.0] Ø.75 [19.1].37 [9.4] Ø.995±.002 [25.3].37
TPR 281, 80 C, DN 16 ISO-KF
TPR 281, 80 C, DN 16 ISO-KF Flange size: DN 16 ISO-KF Compact and rugged Maximum pressure refers to inert gases Dimensions Similar Image Technical Data TPR 281, 80 C, DN 16 ISO-KF Accuracy: 1 10-3 100
PSG5xx ATM to Medium Vacuum Gauge
The INFICON Standard Gauges,,, PSG510- S and, employ the most advanced digital technology available in themarketplace. The rugged stainless steel sensor cell and compact design qualifythem for use on semiconductor
Document #: DOC_PRD-1002 Origination Date: 8/22/07. Rev: Revision Date: Signature: Title: MHV & SHV High Voltage Test Procedure
Title: MHV & SHV High Voltage Test Procedure Scope: This document describes the test procedure and results for the voltage rating verification of the coaxial MHV and SHV style high voltage connectors and
TPR 280, 80 C, DN 16 ISO-KF
TPR 280, 80 C, DN 16 ISO-KF Flange size: DN 16 ISO-KF For general vacuum applications Compact and rugged Maximum pressure refers to inert gases Dimensions Similar Image TPR 280, 80 C, DN 16 ISO-KF Accuracy:
AGILENT VACUUM VALVEs
GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve
AGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
Sputter System. SPS-R2R series. ULTECH Co., Ltd.
Sputter System SPS-R2R series Introduction System Picture (reference) Process 1) Application : 2) Sputtering material : TCO (ITO,AZO,ZnO), Metal 3) Film width : max. 100mm 4) Film length : max. 100M 4)
PUSH PULL DEVICES. Section 03. Introduction to Push Pull Devices 044. Magnetically-coupled devices. MPPRL - Rotary and Linear Motion 046
Section PUSH PULL DEVICES Introduction to Push Pull Devices 044 Magnetically-coupled devices MPPRL - Rotary and Linear Motion 046 MPPL - Linear Guided Motion 048 MPP - Linear Unguided Motion 050 Edge-welded
PRODUCTS. January, 2008
PRODUCTS 2010 Home Office: Colutron Research Corporation 2321 Yarmouth Ave. Boulder, CO 80301 USA Phone:(303) 443-5211, FAX: (303) 449-5050 Email Addresses: Sales: sales@colutron.com Technical help: technical@colutron.com
Models: CS210A-X5
Neutron Scattering Closed Cycle Cryostat Closed Cycle Cryostat for Neutron Scattering Experiments. The CS-210 is a high power cooler with fast cooldown and high cooling power. Models: CS210S-X5 CS210A-X5
Vacuum Gate Valves Product Introduction Vacuum gate valves are used primarily for the protection of high vacuum pumps but can also be used to 'valve-off' two connecting chambers. The next generation of
Pirani Vacuum Gauges. Digital and Analog Vacuum Gauge Systems. Features and Benefits. HPS Products (800) (303)
Pirani Vacuum Gauges Digital and Analog Vacuum Gauge Systems Features and Benefits Ideal vacuum gauge for foreline loadlocks Rugged filament design for high reliability Designed for use in harsh process
Venting valves. Valves. Manually actuated. Venting valves. Installation elements
Installation elements Venting Manually actuated Venting For manually venting small vacuum chambers Valve opens and closes easily by loosening/ tightening the screw cap FVB = Venting valve HA = Manually
UHV gate valve Series 10
UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric
TE 91 PRECISION ROTARY VACUUM TRIBOMETER
TE 91 PRECISION ROTARY VACUUM TRIBOMETER Description The TE 91 Precision Rotary Vacuum Tribometer is based on a bench mounted test chamber. A motor driven test spindle, in the form of standard rotary feedthrough,
Photon Shutters. Figure 1. Assembled and exploded view of the photon shutter assembly with main components highlighted.
Photon Shutters This document presents a detailed overview of ADC s beam stop and safety shutter design. Beam stops are designed as high heat load absorpers to provide equipment protection. For applications
Vacuum pumps for the ESRF EBS project Michael Hahn
3 rd Rencontres Nationales DU RESEAU TECHNOLOGIES DU VIDE SEVRIER, 10 13 October 2016 Vacuum pumps for the ESRF EBS project Michael Hahn On behalf of the EBS Accelerator Project Team OUTLINE Project definition
ACTIVELINE GAUGES. The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field.
ACTIVELINE GAUGES The new ActiveLine PKR and IKR gauges. Compact, durable and maintenance-friendly, minimized stray magnetic field. ACTIVELINE GAUGES The new ActiveLine PKR and IKR gauges. Compact, durable
ROTARY DRIVES. Section 01. Introduction to the MagiDrive Range 004. Actuation Options 006. SOLID MagiDrive Series. MD10 Solid Range 008
Section ROTARY DRIVES Introduction to the MagiDrive Range 004 Actuation Options 006 SOLID MagiDrive Series MD10 Solid Range 008 MD16N/MD16A Solid Range 0 MD40N/ MD40A Solid Range 2 MD40 Solid Range 4 MD64
Model SVTA-RF-4.5 Nitrogen User Manual
Model SVTA-RF-4.5 Nitrogen User Manual THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF SVT ASSOCIATES, INC. AND SHALL NOT BE USED, DISCLOSED OR REPRODUCED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN
QBV SERIES Butterfly Valves
QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have
DRVRMDMOTL Motorized Linear Drive. DRVMDMOTLR Motorized Linear and Rotary Drive. Instruction Manual
DRVRMDMOTL Motorized Linear Drive DRVMDMOTLR Motorized Linear and Rotary Drive Instruction Manual Version 1.1 07 November 2016 Thurgauerstr. 72, CH-8050 Zürich, Switzerland TEL. +41 44 273 16 38, FAX.
tina14e1 PEG100 Part Number Penning Gauge
O P E R A T I N G M A N U A L tina14e1 PEG100 Part Number 351-000 351-002 Penning Gauge General Remarks We reserve the right to alter the design or any data given in these Operating Instructions. The illustrations
Gemini MxG50x BENEFITS. Long lifetime in harsh environments
The INFICON Gemini Inverted Magnetron Vacuum Gauge is the workhorse for all vacuum measurement applications (pending). Gemini combines two sensor systems into one small device to measure from atmosphere
Series 307. Features & Benefits
Pressure & Vacuum Measurement Solutions w w w. m k s i n s t. c o m Series 307 Vacuum gauge Controller for use with Ionization, Convectron and Thermocouple gauge The Series 307 Vacuum Gauge Controller
Varian, Inc. Vacuum Technologies. Vacuum Measurement. Transducers. Gauge Controllers. Active Gauges. Calibration & Service.
Varian, Inc. Vacuum Technologies Vacuum Measurement Transducers 4-17 Gauge Controllers 18-28 Active Gauges 29-37 Cables 38 Calibration & Service 41-44 Technical Notes 45-47 The Broadest Gauging Line in
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS
CONNECTION INTO INTERNAL THREADED AND SHAPED ELEMENTS Series IG (manual version) - Quick connector for female threads and shaped elements - Working pressure: from 0 up to 350 bar IG-18-14 66 30 19 1/4"G
CF Components. Introduction. Functional principle 1-45
Introduction The generation of ultra high vacuum (UHV) makes great demands on the material and on the connections. Therefore the CF standard was created in the UHV technology (ISO 3669; enhancement ISO/TS
Vacuum Components C A T A L O G
Vacuum Components C A T A L O G 1 Contents 1 Vacuum valves Angle Valves - 4 Inline Valves - 10 Butterfly & Check Valves - 14 2 s & Fittings Elastomer Seal ISO-KF - 18 Elastomer Seal ISO-LF - 34 Metal Seal
Standard Linear Shift Mechanism LSM/HLSM Series
Technical Datasheet Standard Linear Shift Mechanism LSM/HLSM Series Production-proven linear motion along the port axis (Z) for sample positioning and production applications. Comprehensive series offering
ELECTRICAL ENGINEERING. Ceramic-Metal Assemblies ELECTRICAL ENGINEERING. Feedthroughs, Tube-To-Tube Insulator, Standoffs
EECTRICA ENINEERIN Ceramic-Metal Assemblies EECTRICA ENINEERIN Feedthroughs, Tube-To-Tube Insulator, Standoffs Voltage (DC) Ø M Ø D Ø F Ø J K 1 Product No. ØM 4 kv M4 1,6 7 3 8 15 41 10 551-1001 6 kv M6
HP 1946A LC/MSD Replacement Parts
Electrospray Spray Chamber, 2 Electrospray Nebulizer, 4 APCI Spray Chamber, 6 APCI Nebulizer, 8 Desolvation Assembly, 10 Analyzer Overview, 10 Mass Filter, 12 Ion Optics and Octopole, 12 Vacuum System,
Granville-Phillips Series 307 Vacuum Gauge Controller
Granville-Phillips Series 307 Vacuum Gauge Controller For Use with Ionization, Convectron and Thermocouple Gauges VACUUM PRODUCTS Benefits Capable of pressure measurement at up to four locations in your
The motorized XY-stage moves a plate which can be configured to the customer s specification. This plate design also allows for exchanging pinholes.
The Multible Pinhole MP10-HV is developed for applications where up to ten pinholes of different sizes are preferred over rectangular apertures or where there is a need to employ filters of different thicknesses
Standard Linear Shift Mechanism LSM Series
Technical Datasheet Standard Linear Shift Mechanism LSM Series Production-proven linear motion along the port axis (Z) for sample positioning and production applications. Comprehensive series offering
PMI MODEL No: RFE BB With Option JT Serial Numbers: PM604086
TEST REPORT ON 2.0 TO 18.0 GHz TSS OF -63dBm DYNAMIC RANGE OF -60 TO +5dB PMI MODEL No: RFE-218-70-BB With Option JT Serial Numbers: PM604086 Designed By Brent Baker Tested By Brent Baker Reported By Peter
HV gate valve Series 11
HV gate valve Series 11 Main applications General purpose valve for isolation in high vacuum systems Especially suited to pump isolation Ordering information Valve with manual actuator crank handle Ordering
Vacuum Compatible Stages
Vacuum Compatible Stages Understanding Vacuum Compatible Stage Specifications Introduction 'Kohzu vacuum-compatible stages' are precise and durable positioning instruments ideally suited for the extreme
Product data sheet. Series 210, DN (2½ - 6 ) Ordering No PE
Series 210, DN 63 160 (2½ - 6 ) Ordering No. 210..-PE06-000. Manual actuator with hand lever Advantages Three sizes available: DN 63, 100, 160 with ISO-F flanges All vacuum parts made of stainless steel
TG5 Review: Infrastructure on top of the tank
TG5 Review: Infrastructure on top of the tank Béla Majorovits TG5 Review: Infrastructure on top of the tank 1 OUTLINE: Mission Statement Transport Infrastructure Storage Infrastructure Clean Room and Lock
EpiCentre The Deposition Stage
EpiCentre EpiCentre Introduction Range Overview The EpiCentre range of deposition stages employs cutting edge design and engineering to give high temperature substrate heating and manipulation under true
TELEDYNE HASTINGS INSTRUMENTS
DAVC-4 DAVC-6 FEATURES www.disensors.com TELEDYNE HASTINGS INSTRUMENTS Operates Hastings Instruments Most Popular DV-4 and DV-6 Gauge Tubes Ranges: DV-6 (1 999 mtorr) DV-4 (0.02 20 Torr) Direct Replacement
ROTARY TELESCOPIC TRANSFER ARM
Section ROTARY TELESCOPIC TRANSFER ARM Introduction to 078 2-Axis 082 3-Axis 084 76 77 Radial Distribution Chamber Solutions Rotary Telescopic Transfer Arm THE ENABLES YOU TO: 1. Reach further Radial systems
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
45 YEARS OF EXPERIENCE
ENGINE CONNECTORS 45 YEARS OF EXPERIENCE High Performance Connectors for Critical Environment Temperature Up to 350ºC / 662ºF Vibrations Fire Corrosion 45 YEARS OF EXPERIENCE OLD PRODUCTS DBA 3x NEW GENERATION
National Electrostatics Corp. Metal/Ceramic Assemblies. Acceleration Tubes APPLICATIONS DESIGN
Metal/Ceramic Assemblies 02/17 One million Volt assembly of high gradient acceleration tube sections designed for operation in 80 psig SF 6 insulating gas. The NEC all-metal and ceramic assemblies are
83000 All Aluminum Gate Valves
All Aluminum Gate Valves Table of Contents Introduction... Page 120... Page 121 Model Key Guide... Page 122 1.5" ID (DN40mm)... Page 123 2.0" ID (DN50mm)... Page 124 2.5" ID (DN63mm)... Page 125 3.0" ID
Gas regulating valve EVR 116, motorized, DN 16 ISO-KF
Gas regulating valve EVR 116, motorized, DN 16 ISO-KF High gas throughput Very broad regulating range With integrated motor control electronics Characteristic Gasflow [mbar l/s] 1000 100 10 1 10-1 10-2
Chamber Accessories and Feedthroughs
Chamber Accessories and Feedthroughs For many years now KEY HIGH VACUUM PRODUCTS, INC. has fabricated "custom" vacuum chambers and components for our systems group, in addition to countless others for
Rotary motion . :. Standard. UHV and HV series. Section 7.1. Motion and manipulation. Features. Description. Specifications
Section 7.1 Rotary motion Standard UHV and HV series Continuous rotary motion Manual or motorized actuator Rotary position lock UHV or HV-compatible materials Welded bellows seal Bakeable to 00 C - CF
TVC_Relation.doc date: 20 th December 2005 Prot.:
TECNICAL TVC_Relation.doc date: 20 th December 2005 Prot.: - - riferimento Thermo-Vacuum Chamber (TVC) Contenuti Description of the camera, flanges and feedthrough signature prepared by : 20/12/05 ing.
ELECTRICAL ENGINEERING. Keramik-Metall-Verbindungen ELECTRICAL ENGINEERING. Feedthroughs, Tube-To-Tube Insulator, Standoffs
EECTRICA ENINEERIN eramik-metall-verbindungen EECTRICA ENINEERIN Feedthroughs, Tube-To-Tube Insulator, Standoffs SINE TERMINA FEEDTHROUHS Voltage (DC) Ø M Ø D Ø F Ø J 1 Product No. ØM 4 kv M4 1,6 7 3 8
DEPOSITION STAGES. Section 11. Introduction to the EpiCentre range of deposition stages 150. Technology Advantages 152
Section DEPOSITION STAGES Introduction to the EpiCentre range of deposition stages 150 Technology Advantages 152 EC-I In-line deposition stage 154 EC-R Right angle deposition stage 158 GLAD Glancing Angle
CSB Series Broadband Motorized Coaxial Switches
CSB Series Broadband Motorized Coaxial Switches Features Broadband DC to 806 MHz 3 or 4 port configurations Three port application require only the addition of a shorting cap Non-volatile position memory
Agilent Turbo-V 750 and Turbo-V 850 TwisTorr. The new molecular-drag Technology
Agilent Turbo-V 75 and Turbo-V 85 TwisTorr The new molecular-drag Technology The new molecular-drag technology What is TwisTorr 2 Agilent Technologies, presents the new TwisTorr molecular drag technology
GWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
UHV Angle valve (Series 284) with pneumatic actuator, single acting with closing spring (NC)
UHV Angle valve (Series 84) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 84 85 The fabrication number is indicated on each product
PT-M90 Automatic Full-Sequence Modulation Gas Control System
PT-M90 PT-M90 Automatic Full-Sequence Modulation Gas Control System PT-M90 Module System Illustration Pucada.Tech M901-0316 Gas Valve (PT-V1C-with step motor) A Profile Dimension: Length(84mm) * Width(40mm)
F5D Series In-Tank Filter Assembly
F5D 070-150 Series In-Tank Filter Assembly Parts Matrix 501 Del Norte Boulevard Oxnard, California 93030-7983 (805) 604-3700 Fax: (805) 604-3701 filters@ptitechnologies.com www.ptitechnologies.com An ESCO
RVS-DX Digital Reduced Voltage Motor Starter
RVS-DX Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings
CRN15-17 A-FGJ-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-17 A-FGJ-G-V-HQQV 3x4/69 5 HZ Grundfos Pump 96526 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn15/96526/crn-15-17-a-fgj-g-v-hqqv.html
WL Series Wire Wound Chip Inductor
Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip Inductor for Fully Automated Assembly
CRN15-03 A-P-G-V-HQQV 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN15-3 A-P-G-V-HQQV 3x4D 5 HZ Grundfos Pump 965238 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn15/965238/crn-15-3-a-p-g-v-hqqv.html
Isolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1
Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11
Feature. -Low profile, High Current are Available. Shock and Pressure. -Tighter Tolerance of ±2% -Smaller Size of 0402 (1005) -CATV Filter, Tuner
Wire Wound Chip Inductor-WL Series Feature -Wire wound Ceramic Construction Provide High SRFs -Ultra-compact Inductors Provide Exceptional Q Values -Low profile, High are Available -Miniature SMD Chip
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur , Uttar Pradesh, India Centre for Lasers and Photonics
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur 208016, Uttar Pradesh, India Centre for Lasers and Photonics Enquiry no.: CELP/RV/EQP/MHR/2017/1 Enquiry date: 23/04/2018 Closing date: 17/05/2018 Sealed quotations
Moduflow Series IL2/RF2/CF2 Low Pressure Filters
IL/RF/CF Low Pressure Filters 35 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile filter available
Sputtering. Sensor PN M
Cover Page O P E R A T I N G M A N U A L Sputtering Sensor Title Page O P E R A T I N G M A N U A L Sputtering Sensor www.inficon.com reachus@inficon.com Trademarks The trademarks of the products mentioned
Foam Generator Service Parts List One-Step CAFS
Document Number Issue Date 4/17/15 Rev. Date 12/19/16 Foam Generator Service Parts List One-Step CAFS Index: Foam Generators Pressure Regulator PLC Cable Connections Component Double Generators See Pages
Process Chamber. Gear wheel, conical
Process Chamber Description (including Dimensions and Specification ) OEM Part Number Substrate Carrier ( No 1 ) Knudsen planetary drive Knudsen planetary drive 102070334 Gearing, DN 250 ISO BB147703-T
For Sale: Used Steam Turbine Generator Sets. Offer Ref. STG MW Steam Turbine Genset Condensing-Extraction type
Sonnenberger Str.16 Tel. +49 (0) 611-701888 www.lohrmann.com 65193 Wiesbaden - Germany Fax +49 (0) 611-701895 info@lohrmann.com For Sale: Used Steam Turbine Generator Sets Offer Ref. STG - 25.02 10 MW
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
LANSCE WIRE SCANNING DIAGNOSTICS DEVICE MECHANICAL DESIGN
LANSCE WIRE SCANNING DIAGNOSTICS DEVICE MECHANICAL DESIGN Sergio Rodriguez Esparza, Los Alamos National Laboratory, Los Alamos, NM USA INTRODUCTION The Los Alamos Neutron Science Center (LANSCE) is one
Rotary Feedthroughs Shutter Actuation
Rotary Feedthroughs Shutter Actuation Manual Shutter Feedthrough FRMC-133-25 1/4 O.D. probe 1.33 O.D. mounting flange Torque limit: 150 oz-in This is a coarse positioning device Price on 654 request FRMC-133-25
RVS-DN Digital Reduced Voltage Motor Starter
RVS-DN Digital Reduced Voltage Motor Starter Specification Guide Specification Guide Contents 1.0 Introduction 2.0 Specifications 2.1 Standard Performance Features 2.2 Standard Protection Features 2.3
Mechanical Feedthroughs. Rotary Feedthroughs with Magnetofluid Sealing
Mechanical Feedthroughs Rotary Feedthroughs with Magnetofluid Sealing Contents Rotary Feedthroughs with Magnetofluid Sealing Introduction Page -3 to -4 SUPERSEAL Series Page -5 to -6 RMS Series Page -7
8.2UHVANDHIGHVACUUMRIGHTANGLEVALVES->Page8.4
UHV and High Vacuum UK: uk@allectra.com VALVES.UHVANDHIGHVACUUMGATEVALVES ->Page. UHVandHighVacuumGate-Manual UHV and High Vacuum Gate - Pneumatic with Position Indicator UHVandHighVacuumGate-SpareGasketSets
Life Extension Testing of Electrical Penetration Assemblies
Nuclear Division Life Extension Testing of Electrical Penetration Assemblies EQ Conference Oct 31 Nov 2, 2018 Steve Benesh, Curtiss-Wright Nuclear 1 October 22, 2018 Curtiss-Wright Summary Life Extension
VACUUM THE VACUUM SHOPPER
VACUUM THE VACUUM SHOPPER Open 24/7 For On-Line Shopping-Free Shipping! Mechanical Pumps PAGE 2 Calibration Services PAGES 14-15 2009 Rental Leak Detectors PAGE 76 CALIBRATION LABORATORY: 1566.01 Power
Installation Instructions. Standard Gate Valves
Installation Instructions Standard Gate Valves Read All Instructions Prior to Installation Keep Instructions with the Valve for Future Reference 1 Standard Gate Valve Installation Manual UNPACKING KJLC
Autoclave Thermocouples (Type 9) and Pt100 Sensors (Type 69)
Autoclave Thermocouples (Type 9) and Pt100 Sensors (Type 69) A range of thermocouple sensors specifically designed to withstand the harsh conditions within autoclaves. Autoclave Load and Drain thermocouples
Butterfly valve control system Series 61
utterfly valve control system Series 61 Downstream pressure control valve Very fast operation High-performance, integrated controller ody material aluminum or stainless steel Valve with integrated controller
UHV Flow Cryostat - Helitran
The ARS manufactured LT3B Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats,
Vacuum Fittings and Feedthroughs
Vacuum Fittings and Feedthroughs CONTENTS Introduction...3 Company History...3 PRODUCTS...4 QUALITY.AND.SERVICE...6 Product Listings KF.FLANGES.AND.FABRICATIONS...7 ISO.FLANGES.AND.FABRICATIONS... 25 CF.FLANGES.AND.FABRICATIONS...41
Gate valve control system Series 64
ate valve control system Series ontrol and isolation valve eneral purpose stainless steel valve daptive pressure control with stepper motor or throttling by adjustable 3-position pneumatic actuator ody
CM5-11 A-R-G-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-11 A-R-G-E-AQQE F-A-A-N Grundfos Pump 96935476 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/96935476/cm5-11-a-r-g-e-aqqe.html
Installation, Operating & Maintenance Instructions. UHV gate valve with pneumatic actuator. Series 108 DN mm (I. D. 2½ 8 )
Installation, Operating & Maintenance Instructions UHV gate valve with pneumatic actuator Series 108 DN 63 200 mm (I. D. 2½ 8 ) This manual is valid for the following product ordering numbers: 108.. -.
Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves
Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section Edition December 2011 Contents General The
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
Mini-F: A Small Plasma Focus Device
Mini-F: A Small Plasma Focus Device Steve Hansen I. INTRODUCTION Those who have followed this publication know of my fondness for coaxial plasma guns. I constructed my first gun sometime around 1972 and
TNC Series Series C TN 114
TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315
CHECK VALVES. Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. CHECK VALVES Bolted Bonnet - Full Opening - Pressure Seal - Wafer Dual Plate, Single Plate & Tilting Disc. Swing Check Valves
Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves
Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section C14 Edition July 2007 Contents General The
2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal