MIG/MAG welding torches
|
|
- Frank Mathews
- 5 years ago
- Views:
Transcription
1 Simplify your life The 3 main considerations when choosing a MIG/MAG torch are: Reliability: WELDLINE WMT2 torches have been designed to meet the rigorous demands of today s welding environment, giving quality and reliability. Standardisation of the wear parts: WELDLINE WMT2 torches are compatible with the most common wear parts available in Europe. Flexibility: WELDLINE WMT2 torches are equipped with a very flexible coaxial cable and a knuckle joint which reduces the strain on the operative ret Air cooled torches: Name Duty cycle General use Max wire Ø at 60% (mm) WMT2-15A 180 A Thin plates, automotive industry 1.0 WMT2-25A 230 A Thin plates, light fabrication 1.2 WMT2-36A 300 A Vessel manufacture, steel structures 1.6 Water cooled torches: Name Duty cycle General use Max wire Ø at 100% (mm) WMT2-500W/L 500 A Heavy duty, high production WMT2-15A WMT2-25A WMT2-36A WMT2-500W/L 2-1
2 WMT2-15A Car body, limited access welding, etc A with C1 (EN ISO 14175): CO2-150 A with M21 (EN ISO 14175): Ar + CO2-0.6 to 1.0 mm diameter steel wire 2 WELDING MIG/MAG WMT2-15A 3m: Cat. N W WMT2-15A 4m: Cat. N W Contact tube for 0.8 mm steel wire, mm conical nozzle, - wear conduit for 0.6 to 0.8 mm steel wire. Conical nozzle Ø 12.5 mm W Conical nozzle Ø 10.0 mm W Cylindrical nozzle Ø 16.0 mm W Spring for nozzle W Contact tube support W Contact tube M6x25 Cu - Ø 0.6 mm W Contact tube M6x25 Cu - Ø 0.8 mm W Contact tube M6x25 Cu - Ø 1.0 mm W Contact tube M6x25 CuCrZr - Ø 0.6 mm W Contact tube M6x25 CuCrZr - Ø 0.8 mm W Contact tube M6x25 CuCrZr - Ø 1.0 mm W
3 WMT2-25A Blacksmith work, thin steel and fabrication, etc A with C1 (EN ISO 14175): CO2, A with M21 (EN ISO 14175): Ar + CO2-0.8 to 1.2 mm diameter steel wire to 1.2 mm diameter aluminium wire WMT2-25A 3m: Cat. N W WMT2-25A 4m: Cat. N W WMT2-25A 5m: Cat. N W Contact tube for 1.0 mm steel wire, mm conical nozzle, Conical nozzle Ø 14.0 mm W Conical nozzle Ø 12.0 mm W Cylindrical nozzle Ø 17.0 mm W Spring for nozzle W Contact tube support W
4 WMT2-36A Pressure vessels, mechanical welding, structural steel work, etc. WMT2-36A 3m: Cat. N W WMT2-36A 4m: Cat. N W WMT2-36A 5m: Cat. N W A with C1 (EN ISO 14175): CO2, A with M21 (EN ISO 14175): Ar + CO2-0.8 to 1.6 mm diameter steel wire to 1.6 mm diameter aluminium wire Original equipment - Contact tube for 1.2 mm steel wire, mm dia. conical nozzle, 2 WELDING MIG/MAG Conical nozzle Ø 16.0 mm W Conical nozzle Ø 14.0 mm W Cylindrical nozzle Ø 20.0 mm W Insulating diffuser W Insulating diffuser high temperature W Insulating diffuser ceramic W Contact tube support M6x28 W Contact tube support M8x28 W Contact tube M6x28 Cu - Ø 1.6 mm W Contact tube M6x28 CuCrZr - Ø 1.6 mm W Contact tube M6x28 - Ø 1.6 mm alu W Contact tube M8x308 Cu - Ø 0.8 mm W Contact tube M8x30 Cu - Ø 1.0 mm W Contact tube M8x30 Cu - Ø 1.2 mm W Contact tube M8x30 Cu - Ø 1.6 mm W Contact tube M8x30 CuCrZr - Ø 0.8 mm W Contact tube M8x30 CuCrZr - Ø 1.0 mm W Contact tube M8x30 CuCrZr - Ø 1.2 mm W Contact tube M8x30 CuCrZr - Ø 1.6 mm W Contact tube M8x30 - Ø 1.0 mm alu W Contact tube M8x30 - Ø 1.2 mm alu W Contact tube M8x30 - Ø 1.6 mm alu W Wear conduit steel spirals 1.6 water L 3 m W Wear conduit steel spirals 1.6 water L 4 m W Wear conduit steel spirals 1.6 water L 5 m W Wear conduit steel spirals water L 3 m W Wear conduit steel spirals water L 4 m W Wear conduit steel spirals water L 5 m W Wear conduit Teflon 1.6 L 3 m W Wear conduit Teflon 1.6 L 4 m W Wear conduit Teflon 1.6 L 5 m W Wear conduit Teflon L 3 m W Wear conduit Teflon L 4 m W Wear conduit Teflon L 5 m W
5 WMT2-500W Pressure vessels, structural steel work, heavy duty applications, etc. Swan neck Standard Long WMT2-500W 3m: Cat. N W W WMT2-500W 4m: Cat. N W W WMT2-500W 5m: Cat. N W W Cooling: Water 100% duty cycle: A with C1 EN ISO 14175): CO2, A with M21 (EN ISO 14175): Ar + CO2-0.8 to 2.4 mm diameter steel wire to 2.4 mm diameter aluminium wire Gas flow rate: 10 to 25 l/min - Contact tube for 1.2 mm steel wire, mm conical nozzle, Conical nozzle Ø 16.5 mm W Conical nozzle Ø 14.5 mm W Cylindrical nozzle Ø 20.0 mm W Contact tube support M6x28 W Contact tube support M8x28 W Insulating diffuser W Insulating diffuser high temperature W Insulating diffuser ceramic W Contact tube M6x28 Cu - Ø 1.6 mm W Contact tube M6x28 CuCrZr - Ø 1.6 mm W Contact tube M6x28 - Ø 1.6 mm alu W Contact tube M8x30 Cu - Ø 0.8 mm W Contact tube M8x30 Cu - Ø 1.0 mm W Contact tube M8x30 Cu - Ø 1.2 mm W Contact tube M8x30 Cu - Ø 1.6 mm W Contact tube M8x30 Cu - Ø 2.0 mm W Contact tube M8x30 Cu - Ø 2.4 mm W Contact tube M8x30 CuCrZr - Ø 0.8 mm W Contact tube M8x30 CuCrZr - Ø 1.0 mm W Contact tube M8x30 CuCrZr - Ø 1.2 mm W Contact tube M8x30 CuCrZr - Ø 1.6 mm W Contact tube M8x30 CuCrZr - Ø 2.0 mm W Contact tube M8x30 CuCrZr - Ø 2.4 mm W Contact tube M8x30 - Ø 1.0 mm alu W Contact tube M8x30 - Ø 1.2 mm alu W Contact tube M8x30 - Ø 1.6 mm alu W Contact tube M8x30 - Ø 2.0 mm alu W Contact tube M8x30 - Ø 2.4 mm alu W Wear conduit steel spirals 1.6 water L 3 m W Wear conduit steel spirals 1.6 water L 4 m W Wear conduit steel spirals 1.6 water L 5 m W Wear conduit steel spirals water L 3 m W Wear conduit steel spirals water L 4 m W Wear conduit steel spirals water L 5 m W Wear conduit Teflon 1.6 L 3 m W Wear conduit Teflon 1.6 L 4 m W Wear conduit Teflon 1.6 L 5 m W Wear conduit Teflon L 3 m W Wear conduit Teflon L 4 m W Wear conduit Teflon L 5 m W
MIG/MAG Welding Torch Push-Pull Plus
T e C h n O l O g y F O r T h e W e l d e r S W O r l d. MIG/MAG Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationMIG/MAG-Welding Torch Push-Pull Plus
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. MIG/MAG-Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationpositions and individual preferences. Welding torches of range ABIMIG 150, due to their functionality, are ideal for the welding of thin gauge metal.
MIG/MAG- Welding torches ABIMIG 150 ABIMIG 150 T air cooled Technical data (EN 0 97-7): ABICOR BINZEL. The right welding torch for every job! Welding torches of the ABIMIG series feature eihter fixed or
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationMIG/MAG welding gun range
MIG/MAG welding gun range Designed for comfortable and productive welding The best combination of weight and balance ensures welding craftsmen comfortably deliver their skill weld after weld. Choose from
More informationKemppi Product catalogue
Kemppi Product catalogue 2015 67 MIG/MAG welding gun range Designed for comfortable and productive welding The best combination of weight and balance ensures welding craftsmen comfortably deliver their
More informationTBi Industries. MIG / MAG Welding torches TBi Classic 2. 0
TBi Industries MIG / MAG Welding torches TBi Classic 1 2. 0 Gas cooled torches CONTENTS. TBi Classic TBi 260 60% (10 min.) Mix : 230 A CO 2 : 250 A Ø 1.0-1.2 mm Water cooled torches TBi 150 (FX, DR) 60%
More informationEdition Subject to change without notice
Spare parts as torch MHS RAUCH-330 water-cooled r2500311 r2500411 r2500511 Torch / 3m EURO central adapter exhaust hose ID38mm Torch / 4m EURO central adapter exhaust hose ID38mm Torch / 5m EURO central
More informationTECHNOLOGY FOR THE WELDER S WORLD. ROBO CATALOG 4.3. Robotic Joining Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. ROBO CATALOG 4.3 Robotic Joining Technology for all Metalworking Industries. www.binzel-abicor.com 2 Content MIG/MAG Welding Torch Systems Page 5 MIG/MAG Welding Torch
More informationCATALOGUE 2018 WELDING TORCHES
CATALOGUE 208 WELDING TORCHES CONTENT WELDING HOSES Switch on, Press and Weld...3 MIG Welding Torches...4 Air-cooled MIG Welding Torches...4 Wear Parts for Air-cooled MIG Welding Torches...8 Water-cooled
More informationXP8 G2 Features and Benefits
14 MIG TORCH RANGE G2 Features and Benefits Swan Necks No More Shorting Overmoulded necks prevent reflected heat transfer passing through the neck. Shorting of the neck to the work piece is now impossible.
More informationtorches Spare parts torches ROBOTIC Evolution Design Robotics Evolution Design Robotics WELDING TORCHES
torches R torches R Spare parts ROBOTIC WELDING TORCHES www.edrtorches.com 1 ROBOTIC WELDING TORCHES SPARE PARTS EDRtorches, S.L. Calle Miguel Angel Blanco 28. 46138 - Rafelbuñol - Valencia Spain. www.edrtorches.com
More informationSection 4 - Plasma cutting General information and choice criteria
Section 4 - Plasma cutting General information and choice criteria 909-0 The new range of plasma cutting equipment developed by SAF-FRO heralds a technological revolution in the field of compressed air
More informationMIG/MAG-Welding Torch Push-Pull Plus
T e c h n o l o g y f o r t h e W e l d e r s W o r l d. MIG/MAG-Welding Torch Push-Pull Plus The versatile torch, with the Plus The Features: Fits any commercially available wire drive unit by using a
More informationVIPER MIG-MMA Welder Package Amps #KUMJRVW182 $ $ Product Brochure For K019A. Description. Features
VIPER 182 - MIG-MMA Welder Package 30-180 Amps #KUMJRVW182 Package Deal Ex GST Inc GST $530.00 $583.00 Package Contents - SAVE $51.50 (Inc) 1 x W244 - VIPER 182 Multi-Function Inverter Welder-MIG-MMA $519.00
More informationROBO CATALOG Robotic Welding Torches & Accessories
TECHNOLOGY FOR THE WELDER S WORLD. ROBO CATALOG Robotic Welding Torches & Accessories 1 www.binzel-abicor.com TABLE OF CONTENTS MIG/MAG Welding Torches ABIROB Air-Cooled ABIROB Air-Cooled MIG Guns...4
More informationLINC GUN THE ULTIMATE MIG GUNS
LINC GUN THE ULTIMATE MIG GUNS STICK GUNS AND WELDERS TORCHES LINC GUN The ultimate MIG guns Complete range to support all your welding applications. High quality rugged product build according to Lincoln
More informationSIRIOCOPT. A new handle that changes everything.
SIRIOCOPT A new handle that changes everything www.saf-fro.com SIRIOCOPT SIRIOCOPT is the new ergonomic and innovative cutting blowpipe designed and produced by our Verona Plant. This patented design makes
More informationA3 MIG Welder. All-inclusive welding solution for robotic applications. And you know.
All-inclusive welding solution for robotic applications And you know. 2 3 12 9 7 5 4 8 11 1 10 6 1 Power source 7 Wire conduit 2 Wire feeder 8 Wire spool set 3 Wire feeder roller kit 9 Wire feeder mounting
More informationTIG. Product Catalogue 1.0 / V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. TIG Product Catalogue 1.0 / V1 www.binzel-abicor.com Content TIG-Welding Torches TIG-Welding Torches ABITIG air- and liquid-cooled Page 04 05 ABITIG
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1. Plasma Cutting and Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1 Plasma Cutting and Welding Technology for all Metalworking Industries. www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches
More informationMIG/TIG/PLASMA/ROBO Welding & Cutting Torch Technology. All products conform to EN ,, and are RoHS2, REACH and WEEE compliant RELEASE
MIG/TIG/PLASMA/ROBO Welding & tting Torch Technology All products conform to EN60974-7,, and are RoHS2, REACH and WEEE compliant 1 2016 RELEASE 2 All products conform to EN60974-7,, and are RoHS2, REACH
More informationProcess Connections for Dial Thermometers
sales@jumo.co.uk Data Sheet 608730 Page 1/7 Process Connections for Dial Thermometers Special features Temperature probes (TF) Process s (TA) Thermowell (SH) Temperature probes (TF) (S 1 min. 25 mm for
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS
More informationWater-Cooled Automatic Catalog 2008 LIT.9189 July, 2008
Water-Cooled Automatic Water-Cooled Automatic Catalog 2008 LIT.9189 July, 2008 Technology for the Welder s World. TABLE OF CONTENTS AUT501D and AUT501DR Series, Water-Cooled AUT Gun w/ratings........3
More informationTIP TIG HOTWIRE 18 SUPER COOL TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% INTERNAL PARTS
TIP TIG HOTWIRE 18 SUPER COOL TORCH Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% COMPLETE TORCH ASSEMBLY 10002461 TIP TIG 18 SC HW TORCH WITH ORANGE LINER (14FT) $995.00 ea. 10002465 TIP
More informationPLASMA. Product Catalogue 2.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS
More informationMINI MIG MIG Welder Amps
MINI MIG 180 - MIG Welder 35-180 Amps #KMM180 ORDER CODE: W240 MODEL: MINI MIG 180 Type: MIG Part Number: KMM180 Voltage (V): 240 Recommended Plug Amperage (amp): 15 Welding Current Range MIG (amp): 35-180
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationRapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
More informationVIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018
VIPER 150 - Multi-Function Inverter Welder-MIG-MMA 30-150 Amps #KUMJRVM150 Ex GST Inc GST $430.00 $473.00 $400.00 $440.00 Special Ends 31/12/2018 ORDER CODE: W245 MODEL: VIPER 150 Type: MIG / MMA & Multifunction
More informationTECHNOLOGY FOR THE WELDER S WORLD. TIG CATALOG 4.1. TIG Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. TIG CATALOG 4.1 TIG Welding Technology for all Metalworking Industries. www.binzel-abicor.com Content Content 3 TIG Welding Torches ABITIG GRIP air and liquid cooled
More informationMIG 300 D3 Synergic puls
MIG 300 D3 Synergic puls 290-030450-00000 TEAMWELDER MIG 300 D3 SYNERGIC the powerful multi-talent featuring three welding procedures MIG/MAG, MMA and TIG Welding of self-shielded flux cored wires without
More informationEdition Subject to change without notice
Torches with first meter leather hose. Prices without leather on request. Machine side seperate connections with Tuchel-plug. In varation to the torches listed below, the torches can also be produced with
More informationWELDING SYSTEM. Welding System. Car-O-Liner is a world leading provider of collision repair systems
Eng E WELDING SYSTEM Welding System Car-O-Liner is a world leading provider of collision repair systems Contents Resistance Spot Welder 4 Resistance Spot Welder CR500 DA 4 Resistance Spot Welder CR510
More informationAll products conform to EN ,, and are RoHS2, REACH and WEEE compliant
MIG/TIG/PLASMA/ROBO Welding & Cutting Torch Technology SUREGRIP MILLER STEALTH All products conform to EN60974-7,, and are RoHS2, REACH and WEEE compliant 2018 RELEASE 1 2 All products conform to EN60974-7,,
More informationPlastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19
Plastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19 A wide variety of thermocouples commonly used in the plastics industry, suitable for high and low temperatures applications. Available in a choice
More informationHot Air Devices for welding, heating, shaping of thermoplastic materials. Floor welding machine Nozzles Accessories
S C H W E I S S T E C H N I K O n e c o m p a n y 3 p r o d u c t i o n l i n e s Hot Air Devices for welding, heating, shaping of thermoplastic materials Floor welding machine Nozzles Accessories Hot
More informationType TW02. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET
D-2011/09/00027-10-3 Date: 01/2017 Type TW02 WEH Connector for pressure and vacuum testing of straight tubes, hoses and components with bead or collar WEH - We Engineer Hightech General DESCRIPTION Features
More informationACCESSORIES welding and cutting
ACCESSORIES welding and cutting 2016 EN » INDEX MIG/MAG MIG/MAG MIG/MAG TORCHES... 04 MIG/MAG CONSUMABLES CONTACT TIPS... 05 NOZZLES... 05 SPRING NOZZLES... 06 SWAN NECKS... 06 DIFFUSERS... 06 CONTACT
More informationSelf-Priming Pumps. Characteristic curves for suction lift Hs = 1 m. n 2900 rpm. H m. H m 50 Q 3
www.calpeda-romania.ro 7..9 www.pompe-calpeda.ro 7.79. Construction Close-coupled self-priming shallow well jet pumps with built-in ejector. NG: version with pump casing and lanter bracket in cast iron.
More informationT e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1.
T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG Product Catalogue 3.1 / V1 www.binzel-abicor.com Content TIG Welding Torches TIg Welding Torches ABITIg grip air and liquid cooled Page 04
More information- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationModular multiple foot switches PC series
3B Modular multiple foot switches PC series Combination diagrams EMERGENCY PUSH BUTTON COMMERCIAL BOX ALUMINIUM PIPES CARRYING ROD ALUMINIUM PIPES HANDLE KIT STABILIZING PLATE DOUBLE CARRYING ROD COMMERCIAL
More informationStandard and Conical AN Series Air Spray Nozzles
Instruction Sheet P/N 107967E Standard and Conical AN Series Air Spray Nozzles Introduction The Nordson air spray nozzles described in this instruction sheet are categorized by their type of spray pattern:
More informationPLASMA. Product Catalogue 1.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 1.0/V1 www.binzel-abicor.com Content PLASMA-Cutting Torches Plasma-Cutting Torches ABIPLAS CUT air-cooled Page 04 05 ABIPLAS
More informationHydrostatic. Overview 192 VEGABAR series VEGAWELL Accessory 200. Hydrostatic VEGABAR series 60 and VEGAWELL
Hydrostatic Overview 192 VEGABAR series 60 194 VEGAWELL 52 198 Accessory 200 Hydrostatic VEGABAR series 60 and VEGAWELL 191 Hydrostatic Level and pressure measurements Measuring principle The pressure
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
More informationDIGIPULS III 320C DIGISTEEL III 320C
DIGIPULS III 320C DIGISTEEL III 320C Innovative and powerful MIG/MAG machine with integrated feeder www.saf-fro.com DIGIPULS III 320C - DIGISTEEL III 320C Modest in size, but with everything a big machine
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationNERTAJET & NERTAJET HP
NERTAJET & NERTAJET HP Automatised plasma cutting range by Air Liquide Welding 2009-300 NERTAJET HP range High accuracy and productivity CPM400-450-600wi NERTAJET HP range Heavy power CPM720-900 Power
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationHAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
More informationPOSITIONING RANGE. The Mechanization to customize the machine around the piece to weld.
POSITIONING RANGE Since control over the welding process is the key to any system s performance, Lincoln Electric offers a full range of positioning equipment. This high quality and robust equipment can
More informationN, N4. End-Suction Centrifugal Pumps standardized EN 733
, Construction Single-stage end-suction centrifugal pumps, with bearing bracket. ominal duty points and main dimensions in accordance with E 7. Back Pull-Out construction, for simple and quick dismantling
More informationINDEX. Chapter1 0. air master. Round Ceiling Diffusers
air master Chapter1 0 INDEX A. Round ceiling diffusers 1. Fixed round ceiling diffuser...: ARDF...10.1 2. Round ceiling diffuser with adjustable pattern...: ARD...10.2 Standard sizes...10.3 Air pattern...10.3
More informationA fresh approach. SPOOL ON mig SERIES DurAgrip SPOOL ON mig Torch Range MIG/TIG/PLASMA. Innovation, technology, PERFORMANCE
Innovation, technology, PERFORMANCE MIG/TIG/PLASMA Welding & tting Torch Technology A fresh approach SPOOL ON mig SERIES DurAgrip SPOOL ON mig Torch Range All products conform to EN60974-7,, and are RoHS,
More informationTXH 121, TXH 151, TXH 201, TXH 251, TXH 401. Spare parts list. Edition S /E /P24 ESAB AB 2013
TXH 121, TXH 151, TXH 201, TXH 251, TXH 401 Spare parts list Edition 20130204 Rights reserved to alter specifications without notice. 0459 839 087-1 - TXH 121, TXH 151, TXH 201, TXH 251, TXH 401 F= flexible
More informationSpare Parts Manual. Single Screw Extruder BASF. Spare Parts Manual BASF rev
Spare Parts Manual Single Screw Extruder BASF Spare Parts Manual BASF rev 09--08 Contents Screw Elements... Barrel assemblies...8 Clamps... Barrel end section... 5 Cutter...5 6 Shaft...9 7 Control Arm...
More informationMAGNUM PRO AL G225A/G4W
Operator's Manual MAGNUM PRO AL G225A/G4W Rear Trigger For use with machines having Code Numbers: K3355-[] K3356-[] K3357-[] K3358-[] K3420-[] K3421-[] K3422-[] K3423-[] Front Trigger Save for future reference
More informationFor robot types with inner cable dress. Solutions for: ABB FANUC KUKA YASKAWA/MOTOMAN
The Original. Weld Package Power Joint For robot types with inner cable dress Solutions for: ABB FANUC KUKA YASKAWA/MOTOMAN Power Joint Weld Package: DCT power source Weld process controller Robot interface
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationSeries 09SVP Single Axis Valve Gate Nozzle
Series 09SVP Single Axis Valve Gate Nozzle Stabilize your Process CAT-01-0065_EN-Rev03 EN 01 / 2018 Product Description - Technical Data NOTICE Valve Pin Operation Operation medium Pressure range Flowrate
More informationFAR51. Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications
f ti r : FAR51 Insertion adapter with venting element Universal insertion adapter for existing flange nozzles, suitable for high temperature applications Application Process adapter for the microwave barriers
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationMULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
More informationESV - EGMO Sampling Valves
Hygienic Flow Equipment ESV - EGMO Sampling Valves Hygienic sampling valves for pharmaceutical & sanitary applications The EGMO Sampling Valves are uniquely designed for process quality control, which
More informationenglish Technologies and systems for automatic and robot welding lines
english Technologies and systems for automatic and robot welding lines THE TECHNOLOGY OF TOMORROW, TODAY Selco has developed a range of all-new and highly innovative hardware and software solutions for
More informationSPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER. Sokółka 20...
SPARE PARTS CATALOGUE Z560 BERTA BALE WRAPPER Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete main frame 3 2. Wrapping foil feeder 7 3. Stretcher roll, set 11 4. Complete
More informationHydrostatic. Continuous level measurement. Overview Page 186 VEGABAR series 60 Page 188 VEGAWELL 52 Page 192 Accessory Page 194.
Hydrostatic Continuous level measurement Pressure Overview Page 186 VEGABAR series 60 Page 188 VEGAWELL 52 Page 192 Accessory Page 194 185 Hydrostatic Level and pressure measurement Measuring principle
More informationTemperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,
Accessories Temperature Sensors for Injection Molding Types 6192B, 6193B, 6194B, 6195B Temperature sensors for measuring the contact temperature directly in the cavity at the surface of the solidified
More informationPFERD cut-off wheels Forever better
PFER cut-off wheels Forever better STEEL STEEL + INOX INOX TRUST BLUE Performance upgrade 2018: Product range improvements and additions The right choice for everyone Optimized design for a simplified
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE AGA 0.60 203 PERFORMANCE CURVE AGA 0.75 204 PERFORMANCE CURVE AGA 1.00
More informationList of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
More informationLarger area of contact, meaning big pushing force with less damage to the surface of the wire.
The Innovation The Planetics drive feeder transports the wire by means of two hyperbolically profiled rollers that in a planetary manner rotate around the welding wire. The drive power is transmitted from
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationMIG Guns & Accessories
MIG Guns & Accessories MIG Guns Recommended for applications using solid and flux core wire Guns are complete with 15' cable length A complete selection of replacement parts for most brands of guns is
More informationLevel limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
More informationSee page 59 for complete parts list for all kits.
ELECTRIC & BATTERY-POWERED KNOCKOUT KITS Gator Plus Battery-Powered Knockout Punch Driver Kits SPECIFICATIONS Weight (driver with battery only) Overall Length (ram retracted) Height Maximum Punch Force
More informationDESIGNED TO WORK BY WELDERS, FOR WELDERS.
DESIGNED TO WORK BY WELDERS, FOR WELDERS. TABLE OF CONTENTS INFO & SPECIALS The foundation........................ page 1.1 Why you can rely on us.................... page 1.2 To dot the i's and cross
More information800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
More informationPFS-FN FEATURES: * ASME & ISO RECOGNIZED * * WIDELY ACCEPTED TEST STANDARD * * RELIABLE PERFORMANCE HISTORY * * ACCURATE METERING SOLUTION *
FEATURES: * ASME & ISO RECOGNIZED * * WIDELY ACCEPTED TEST STANDARD * * RELIABLE PERFORMANCE HISTORY * * ACCURATE METERING SOLUTION * * FLEXIBLE DESIGN & MATERIALS * 2 PFS FLOW NOZZLE TYPES PFS-NZF PFS-NZFT
More informationDN 1/4" to 4 Female-Female BSP - 10 C C Max Pressure : 16 Bars Specifications : Disc check valve All positions Short length
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4 Female-Female BSP - 10 C + 150 C Max Pressure : 16 Bars Specifications : Disc check valve All positions Short length Materials : Stainless
More informationControllers and Power Sources. Welding Tractors
Controllers and Power Sources Welding Tractors 23 Railtrac 1000 Multi-purpose system for welding and cutting Ideal for a wide variety automated gas metal arc welding (GMAW) applications. Made from aluminium
More informationFor a higher life-time of consumables. Solutions for: ABB FANUC KUKA YASKAWA/MOTOMAN
Watercooled Weld Package Power Clutch water-cooled For a higher life-time of consumables Solutions for: ABB FANUC KUKA YASKAWA/MOTOMAN The Power Clutch water-cooled Weld Package: DCT power source Weld
More information(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz
&(175,)8*$/38036':2 &217(176 50Hz Page 63(&,),&$7,216 200 SELECTION CHART 201 PERFORMANCE CHART 150 202 PERFORMANCE CHART 200 203 PERFORMANCE CHART 300 204 PERFORMANCE CHART 400 205 &216758&7,216 300 SECTIONAL
More informationSM-F100 CONNEX Spray Gun Plasma Spraying. Parts List PL EN 07
Plasma Spraying Parts List PL 40867 EN 07 Oerlikon Metco 6/2015 Oerlikon Metco Switzerland Rigackerstrasse 16 CH-5610 Wohlen +41 56 618 81 81 +41 56 618 81 00 www.oerlikon.com/metco Spare Parts Categories
More informationTHERMASGARD TF 43 THERMASGARD TF 65
THERMASGARD TF 65 Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) THERMASGARD TF 43 is a resistance thermometer with a passive output, enclosure made from impact-resistant plastic
More informationBROEN QUICK CONNECT FOR 5.0 GASES
BROEN QUICK CONNECT FOR 5.0 GASES LAB FITTINGS Table of contents Table of Contents 2 Advantages 2 Product Range 3 Outlets 4 Technical Specifications 5 Accessories 5 Mounting Information 6-7 Advantages
More informationcomplete Kit with: ST120 torch Ground cable WELDING MACHINES & BATTERY CHARGERS
Viale Galileo Galilei 123 36066 Sandrigo (VI) Italy Tel. +39 0444 666999 Fax. +39 0444 750070 info@helvi.com www.helvi.com PC 123 CNC Robotic machine interface complete Kit with: ST120 torch Ground cable
More informationSince control over the welding process is the key to any system s performance, Air Liquide Welding offers a full range of positioning equipment.
Positioning range Since control over the welding process is the key to any system s performance, Air Liquide Welding offers a full range of positioning equipment. This high quality and robust equipment
More informationDesign and applications
Design and applications The DDM-DS11 measuring system measures and monitors the flow rate of liquids and gases. The device works according to the principle of differential pressure. The differential pressure
More informationCREATIVE EQUIPMENT CC 18 Main Road, Fishers Hill, Germiston, 1401 Tel: Fax:
Page 1 of 6 FROM SERIAL NR 7213200000 TO 7213205371 21 4201.079 POWER CORD 1 4201.000 TANK COMPLETE 22 4290.047 LOCKNUT NYLON 2 4260.006 FUEL GAUGE 23 4290.046 STRAIN RELIEF BUSHING 3 4290.026 TANK FILTER
More informationO:\Machine Manuals & Spare Parts Lists\HD1090 PL Page 1
PIECE PARTS - parts list 1 50670310 Device cover for replacement 1 2 53214230 Handhold 1 3 73061330 Screw M6x50-8.8-R3R (In6Rd) 2 4 73110030 Hexagon nut M6-8-A2E ISO 4032 2 5 63040990 Saucer-head screw
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More information2012 Richardson Electronics CO 2 Laser Consumables Catalog BYSTRONIC
2012 Richardson Electronics CO 2 Laser Consumables Catalog BYSTRONIC Richardson Electronics is a global distributor of RF tubes (power grid tubes) and consumables used in CO 2 industrial lasers. With over
More informationMMA WELDING WELDING TOOLS AND ACCESSORIES
3 MMA WELDING MMA WELDING 3 WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES Electrode holders....................................................................... 52 to 55 MMA kits (electrode
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More information