Power Brush 36 Hydro. Parts Manual. Model Power Brush 36 Hydro (SN ) E A 3/15 Printed in USA

Transcription

1 Power Brush 36 Hydro Parts Manual Model Power Brush 36 Hydro (SN ) E10 The use of any gasoline exceeding 10% ethanol (E10) or 10% MTBE will void the product warranty. L utilisation d une essence contenant plus de 10% d éthanol (E10) ou de 10% de MTBE annulent la garantie. El uso de cualquier otro tipo de gasolina con un porcentaje superior al 10% de etanol (E10) o al 10% de MTBE invalidará la garantía del producto A 3/15 Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.063 1/ / / / / / / / / / / / / / / SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit. Customer Note: If Dealer does not register your product, please fill out, sign and return the product registration card to Ariens or go to YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. Record Engine Model and Serial numbers here: TO SPEED PARTS ORDERING: 1. Know the model and serial numbers of your unit. 2. Know the part number required. 3. Know the quantity required. 4. Know the part description. UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2

3 MODELS (Power Brush 36 Hydro) 36-Inch Power Brush, 12V Electric Start Serial No TABLE OF CONTENTS Decals Engine and Frame Wheels and Axle Idler and Brake Arm Reduction Drive Transmission Mount Transmission Handlebars Controls Control Panel Electrical Continuity Wiring Diagram Brush Head Brush Drive Unit Brush Wheels and Battery Copyright 2015 Ariens Company

4 DECALS BOM ID Number Qty Description DECAL, DANGER - POWER BURSH CE DECAL, DANGER - PTO WARNING DECAL, ARIENS HERITAGE-LARGE DECAL, HYDRO Pro Bypas DECAL, HYDRO BRUSH DECAL, CONTROL - BRUSH 12V 4

5 ENGINE AND FRAME %20,' 1XPEHU %20,' 1XPEHU 4W\ 'HVFULSWLRQ &29(5 %(/7 7$// 352 &29(5 )2$0 68%$58 5(&2,/ %$))/( :$7( (5,(6 *8$5' 612: 68%$58 )5$0( 0$, <'52 &29(5 % (17,/$7(' 6+($9( &20%2 +<'52 :+((/ / %6+* 6/9 ; ; %6+* 63$&(5 ; ; %/7 +(; ; +:+ <:=& *5 %/7 +(; ; *5 <:=& %/7 +(; ; *5 <:=& :6+5 /. ; +9< <:=& :6+5 /. ; 5(* <:=& 5 4W\ 'HVFULSWLRQ :6+5 )/ 67/ ; ; <:=& :6+5 )/ 67/ ; ; <:=& 187 +(; <:=&.(< ; ; &/$ ; 9 %(/7 +$ 5$: ('*( 6(7 9 %(/7 / :5$33(' 6&5 7$3 ; +:+ 75 <:= 6&5 7$3 ; /*+:+ 75 6&5 7$3 ; &$37,9( (1*,1( 68%$58 (; $6 9

6 WHEELS AND AXLE 6

7 IDLER AND BRAKE ARM 7

8 REDUCTION DRIVE 8

9 TRANSMISSION MOUNT 9

10 TRANSMISSION 10

11 TRANSMISSION Item Ariens p/n Hydro-Gear p/n Qty. Description Housing Main, Shot Cover Plate, Expansion Bladder Screw, Hex Flange 1/4-20 x Bolt, Self Tapping x Plug, 9/16-18 Straight Thread Socket Head Tube, Sealant Bearing, Cradle Swash Plate Kit, Input Shaft Bearing, 21 x 35 x Kit, 3cc Block Screw, HFHCS 5/16-18 x Kit, 10cc Block Bearing, Thrust 30 x 52 x Arm, Control Screw, Hex Washer 1/4-20 x Kit, Motor Shaft Washer, Flat 1.23 x 1.57 x Arm, Bypass Screw, M4 x 16, Wuplast Hub, Pulley Dia Label, Patent Pin, Straight Headless Kit, Seal Kit, Center Section Kit, Fan/Pulley 11

12 HANDLEBARS 12

13 CONTROLS 13

14 CONTROL PANEL 14

15 ELECTRICAL Item Part No. Qty. Description Switch Assembly (Includes Items 2 6) Key with Cap Cap, Ignition Switch Nut, Panel Ignition Switch Assembly Washer, Locking Internal.625 x Harness, Wire 12V, Light and Heated Hand Grips Washer, Flat Steel.505 x.875 x Washer, Locking Internal.563 x Switch, On/Off Heated Hand Grips AMP Fuse Heated Hand Grip with Terminal (Recommend Loctite E90-FL Epoxy for Installation) AR Boot, Switch (Optional) Rivet, Pop # x Harness Adapter Headlight Assembly (Includes item 17) Bulb, Light (Included in item 16) 15

16 CONTINUITY The diagrams below show the various states of connection for electrical components. The solid lines on switchs show continuity. NOTE: All switches are viewed from the rear. Key Switch ( ) Heated Hand Grip Switch ( ) G S G S G S R B R B R B M A M A M A OFF RUN START HEATED HAND GRIPS OFF HEATED HAND GRIPS ON 16

17 WIRING DIAGRAM 1 2 HEATED HAND GRIP SWITCH 7 4 HEATED HAND GRIPS Item Part No. Qty. Description Head Light Assembly Heated Hand Grip with Terminal (Recommend Loctite E90-FL Epoxy for Installation) 3 N/A AR Battery (Recommend 300 Minimum CCA at 0 F. Size 10U1L) Harness, Wire-12V, Light and Heated Hand Grips Switch Assembly AMP Fuse Switch, On/Off Heated Hand Grips 17

18 BRUSH HEAD 18

19 BRUSH DRIVE UNIT 19

20 BRUSH WHEELS AND BATTERY 20

21 Ariens 655 West Ryan Street Brillion, WI Fax