Please visit our Website at

Transcription

1

2 able of ontents age o. mphe-ite* eries - mphenol s ltimate ommercial ubminiature onnector erformance riteria, pecifications Insert vailability and Identification lternate ositioning Insert rrangements hell tyles 00 all ounting Receptacle traight lug am ut Receptacle ccessories Receptacle rotection ap lug rotection ap ummy Receptacle able lamps ontacts, ealing lugs, lastic ust aps ontacts (rinted ircuit oard, ire wrap) iber Optic ermini pplication ools ow to Order mphe-ite onnectors mphe-ite apabilities (iber Optics, ilter ontacts, lex erminations, oax ontacts) mphe-ite apabilities (round lane onnectors, ower ontacts, winax ontacts) ales Office isting lease visit our ebsite at lso visit mphenol Industrial Operations and mphenol erospace are both located at idney, Y. ogether with other mphenol divisions worldwide, mphenol offers one of the broadest ranges of interconnect products in the marketplace. mphenol erospace and mphenol Industrial Operations are ertified IO 9001 anufacturers. * mphe-ite is a registered trademark of mphenol orporation.

3 mphe-ite eries mphenol s ultimate commercial subminiature connector ommercial 38999, eries III ype omposite onnectors oupling ut Quick oupling hread Ratchet he mphe-ite onnector eries is designed for communications equipment manufacturers with signal, power, R or fiber optic interconnect requirements in harsh environments such as communication towers, outdoor and roof-top applications. his commercial 38999, eries III type composite connector series is ideal for communications equipment, manufacturing process control and medical equipment. he mphe-ite offers the highest performance capabilities for severe environment applications, and yet is cost effective enough for general duty and non-environmental applications. he mphe-ite is Recognized, file eatures and enefits of the mphe-ite eries: ervice lass mphe-ite connectors provide excellent I shielding and grounding through electroless nickel plating and spring grounding rings. nvironmental sealing is ensured with interfacial seals to prevent contact corrosion. omposite shells are completely immune to corrosion problems. ervice lass provides a non-conductive finish when I shielding is not a criteria. lass omposite shells resist severe corrosion, and provide plating endurance from salt spray exposure for a minimum of 2000 hours. ompletely mates in one 360-degree turn of the coupling nut to provide the fastest and easiest equipment assembly and maintenance possible. cme threads provide coupling durability. hicker wall sections and a greater coupling surface area improve strength and shock resistance. lunting of the thread on both the coupling nut and receptacle eliminates cross coupling. Recessed pins minimize potential contact damage in this 100% scoop-proof connector. In a blind mating application, mating shells cannot scoop the pins and cause a shorting or bending of contacts. rigid dielectric insert with excellent electrical characteristics provides durable protection to the contacts. he socket contacts are probe proof, and all contacts are rear insertable and rear removable. vailable in sizes 10 power, 12, 16, 20 and 22 contacts are plated in the standard 50 micro inches minimum gold, with 100 micro inches as an option. Optional eatures: onductive and non-conductive finish options are available. ee how to order pg. 22. ircuit protection with filter contacts or surge arresting devices are available. ee pg. 23. iber optics, extended life and shielded coaxial contacts can be specified in mphe-ite connectors. ee pg. 23. round plane versions of the mphe-ite can be specified for use with coaxial and triaxial contacts. winax and power contacts can also be specified in the mphe-ite. ee pg. 24. electively plated contacts are available. ee pg. 16. igh decoupling option is available for high vibration applications. ee how to order pg lug hell pring ingers (I) esigned for erformance umerous advantages in performance capability are designed into the mphenol mphe-ite onnector. positive shoulder to shoulder coupling design, grounding fingers, and electroless nickel plating provide superior I shielding capability of 65 d minimum at 10 z. mphe-ite hell tyles nti-ecoupling evice wall mount receptacle straight plug jam nut receptacle

4 mphe-ite eries performance criteria, specifications mphenol mphe-ite connectors provide I shielding capability which exceeds I eries III requirements. he mphe-ite connector with I grounding fingers and conductive finishes has proven to be the ultimate in I shielding effectiveness. he charts at right illustrate shielding effectiveness data which is typical of connectors tested with the nickel finish over a wide frequency range. hese capabilities along with a 125 temperature rating and superior moisture sealing protection provide the user with a connector that can withstand the most rigorous application. RI rating is 105 d YI II I I hielding ffectivess d esting by riaxial ethod hielding ffectiveness mphe-ite onnectors (ickel inish at 55 to +125 ) ontact * hen using silver plated wire. O RI rimp est urrent ermetic aximum illivolt rop rimp* (ower) rimp ell ata ontact ell iameter ominal ell epth ± ± ± ± (ower).137 ± ervice Rating RI RI uggested Operating oltage (ea evel) (R) est oltage (ea evel) R R I R II R ** lease note that the establishment of electrical factors is left entirely in the designers hands, since he is in the best position to know what voltage, switching surges, transients, etc. can be expected in a particular circuit RQY RZ d YI II I I hielding ffectivess d esting by ode tirring ethod hielding ffectiveness mphe-ite onnectors (ickel inish at 55 to +125 ) RQY IRZ est data beyond 2z is subject to equipment variation. II mphe-lite connectors are available in the following finishes: onductive lectroless ickel lated omposite (ervice lass ) lack omposite, unplated (ervice lass ) onductive lack Zinc omposite (ervice lass X) ee how to order page 22. 2

5 mphe-ite eries insert availability and identification hell /rrg. ervice Rating otal ontacts ontact 12 (oax) 10 (ower) 8 (oax) 8 (winax) rounded I I I I I I I I II I I I I I II I I II I I II I I (ee ote) II I I I I * I I I I I I I round plane proprietary option available. rrg. 9-5 is exclusively ground plane type. ee page 24 for further information of ground plane connectors. * wo size 16 contacts dedicated to fiber optics. onsult idney, Y or catalog for fiber optic information. 3 or R180/ and R195/ cables only. (ontact idney, Y for other cable application). 8 oax and winax are interchangeable.

6 mphe-ite eries alternate insert positioning hell R Y/YY OIIO ey & keyway arrangement identification letter R or R or R or R or plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. 9 11, 13, and R R I YY R (front face shown) 17 and 19 21, 23, and R R (front face shown) I YY 4

7 mphe-ite eries insert arrangements front face of pin inserts illustrated Insert rrangement ervice Rating rounded I I I I I umber of ontact ontact 8 winax R R Insert rrangement ervice Rating I I I I II I umber of ontacts ontact R Insert rrangement ervice Rating I I I umber of ontacts ontact winax 12 R a b Z c Y X R R Y Z X Insert rrangement ervice Rating II oax I I umber of ontacts ontact oax 8 oax O

8 mphe-ite eries insert arrangements front face of pin inserts illustrated f h R g R e d j c b a f g h X Y Z Insert rrangement ervice Rating II I I umber of ontacts ontact 16 8 oax R j X Y i k Z h r m a R g q n b f c d e p j X Y i k s Z m h t r a n R g q p b c f e d Insert rrangement ervice Rating II I I umber of ontacts ontact X R Insert rrangement ervice Rating II umber of ontacts ontact 8 oax 8 winax ote: 8 cavities can be supplied with either twinax or coax per customer requirement. 6 O

9 mphe-ite eries insert arrangements front face of pin inserts illustrated R n m p k q z r h X y s g Y x t f w u a Z e v d b c X m n p Y q k R z r Z j y a s i x t b h w u c g v d f e Insert rrangement ervice Rating I I umber of ontacts ontact Z a Y w v b c X u x d t y e s z f r g q h p k n m R Insert rrangement ervice Rating I umber of ontacts ontact winax 8 winax a b d c R q r s e w t Z p f n v u g k m h R Y X Insert rrangement ervice Rating I umber of ontacts ontact ower 22 8 winax 12 7 O

10 mphe-ite eries insert arrangements front face of pin inserts illustrated R Z Y X Y X R Z a Insert rrangement ervice Rating I I umber of ontacts ontact winax 12 oax oax (ocations and Y - edicated to iber Optics) R b a Z f Y c d e X f g e q R d p c b h k X r m Y n Z a Insert rrangement ervice Rating I I umber of ontacts ontact X Y Z p n a m b w q k c v x r h d u t s g e R f s r q p t R z n m y k h X u Y v Z a b w c d x e g f Z Y a v b X u c t w d s x e r y f q z g p h n i R m k j Insert rrangement ervice Rating I I I umber of ontacts ontact oax 20 oax contacts for R180 or R195 cable. 8 O

11 mphe-ite eries 00 wall mounting receptacle, composite 00( )* 00( )* 00X( )* 2 R 1 2 R 2 2 R I OR IZ 8 OXI OY, RI O R.909 X X Z I OR IZ 8 IX OY, RI O X X X X * o complete order number, see page 22. hell hread lass (lated) R 1 R Z anel hickness ± Inches hell ll dimensions for reference only R 1 R 2 ax hread etric Z ±.13 illimeters X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g esignates true position dimensioning 9

12 mphe-ite eries 06 straight plug, composite 06( )* 06( )* 06X( )* I OR IZ 8 OXI OY, RI O X X X X R Q R.359 X 9.12 X I OR IZ 8 IX OY, RI O X X * o complete order number see page 22. hell hread (lated) ll dimensions for reference only. Q ia Inches hell Q illimeters hread etric X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g 10

13 mphe-ite eries 07 jam nut receptacle, composite 07( )* 07( )* 07X( )* I.062 I.125 X 1.57 I 3.18 X.378 X 9.60 X I OR IZ 8 OXI OY, RI O.794 X X R 2 R.091 X 2.31 X R IZ 9/ IZ 13/ X X I OR IZ 8 IX OY, RI O.940 X X * o complete order number see page 22. hell hread lass (lated) ex ±.010 Inches hell ex ± illimeters hread etric X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g ll dimensions for reference only. shaped panel cut-out dimensions to prevent connector from turning 11

14 mphe-ite accessories receptacle protection cap.578 X X.578 X X * ( ) with nylon braid * ( ).578 X X * ( ) ROX ROX * ( ) ROX ROX with nylon braid and metal ring attached * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel hell hread lass ia. ia Inches inish onsult idney, Y for availability of stainless steel protection caps. ll dimensions for reference only. 10-o uffix lectroless nickel -( ) lack composite, unplated -( ) lack zinc alloy, conductive -( )X hell ia illimeters ia

15 mphe-ite accessories plug protection cap X X * ( ) with nylon braid X X * ( ) with nylon braid and metal ring attached * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel, Inches hell hread lass ia illimeters inish onsult idney, Y for availability of stainless steel protection caps. ll dimensions for reference only. 10-o uffix lectroless nickel -( ) lack composite, unplated -( ) lack zinc alloy, conductive -( )X hell ia

16 mphe-ite accessories dummy receptacle 2 R 1 2 R 2 2 R * ( ) * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel, inish 10-o uffix lectroless nickel -( ) lack composite, unplated -( ) lack zinc alloy, conductive -( )X hell hread lass (lated) R 1 R 2 ± ±.010 anel hickness Inches hell ll dimensions for reference only. R 1 R 2 ± ±.25 illimeters esignates true position dimensioning 14

17 mphe-ite accessories cable clamps * XXX 1 2 R R * XXX I * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel, o inish uffix lectroless nickel -( ) hell 1 in. ia. able 2 ia. able ia. ia. Inches hell 1 in. ia. able ll dimensions for reference only. 2 ia. able ia. ia. illimeters

18 mphe-ite eries contacts, sealing plugs, plastic dust caps R O OR -I RI ontact in art umber ocket art umber 8 (oax) (winax) (ower) or or bove part numbers include standard 500 cycle finish designation - gold plating over suitable underplate in accordance with I or other contact options available for use in mphe-ite connectors, (thermocouple) consult idney, Y. I hell lug Receptacle or metal protection caps see pages 12 and 13. ontact I roprietary o. 8 (oax) (winax) (ower)

19 mphe-ite eries contacts printed circuit board, wire wrap ocket ontacts O ail ia ire rap ontacts ail quare ontact tickout ax/in (ee Illustration below) ll dimensions for reference only. onsult idney, Y for specific contact contour stickout data. designates o tickout. O I O ee also catalog , mphenol ylindrical onnectors for pplications. his catalog provides the most commonly used insert pattern pin-out drawings which have been tooled for the purpose of attaching cylindrical connectors to printed circuit boards. in ontacts ail ia I ontact tickout ax/in (ee Illustration below) socket and pin part numbers include finish designation - gold plating over suitable underplate in accordance with I or other finish variations, consult idney, Y. ote: 22 and 22 contacts are interchangeable. or other contact options available for use in mphe-ite connectors (thermocouple, fiber optic), consult idney, Y ire rap ontacts ail quare

20 mphe-ite eries fiber optic termini multi-mode, size 16 mphenol ulti-mode, 16 ermini eatures and erformance evels: eramic alignment ferrule which precisely positions the fiber within the termini hosphor bronze alignment sleeve, assembled on the socket after polishing insures accurate fiber to fiber alignment (a ceramic alignment sleeve is also available). ypical insertion loss for 100/140 fiber with.2 at 820 nm is.5 to.7 d using ir ap () polish technique se of the ceramic ferrule and sleeve maximizes the ability to hold extremely tight dimensional tolerances while maintaining accurate concentricity, thus providing superior and consistent optical loss performance. ermination accomplished using the industry proven epoxy/ polish method. an be polished ir ap () or hysical contact (). ocket cleaning optional. onsult mphenol, idney, Y for termini cleaning tool. or application tools consult idney, Y. I OY I RI RR RI RI RR O OOR ROZ I I OY ulti-mode 16 iber Optic ermini 16 ulti-mode in erminus.102 ±.001 I I R RI RR X*.080 X I I R R RI.040 X R I 16 ulti-mode ocket erminus.080 X I ± X*.162 ± I I **.040 X R I RI R R.102 ±.001 I RI RR I R.267 ±.003 mphenol ulti-hannel fiber optic connectors are supplied less contacts. Order multi-mode termini by mphenol part number designation as shown in the chart below. onsult mphenol, idney, Y for further availability. * Indicated dimension when fully assembled. ** lignment sleeve shipped unassembled. Ordering Information ulti-mode ermini ( 16) for mphe-ite onnectors iber ia Ref 16 ocket 16 in ore/ladding ia (icrons) Inches icrons 50/ / / /140/ /140/ / / / / dditional sizes available upon request: consult mphenol, idney, Y for availability. ower contacts can be purchased separately, contact mphenol, idney, Y. 18

21 mphe-ite eries fiber optic termini multi-mode, size 20 mphenol ulti-mode, 20 ermini eatures and erformance evels: esigned for use in size 20 cavities of mphe-ite connectors esigned with similar high performance components as the proven size 16 termini omparable performance and reliability to the size 16 termini can be expected Offers increased termini density in mphenol mphe-ite connectors aintains fiber optic/electrical hybrid capabilities llows for multiple fiber accommodations ermination accomplished using the industry proven epoxy/ polish method. an be polished ir ap () or hysical contact (). ocket cleaning optional. onsult mphenol, idney, Y for termini cleaning tool. or application tools consult idney, Y. I OY RI RR I RI RI RR O OOR ROZ I I OY ulti-mode 20 iber Optic ermini 20 ulti-mode in erminus.069 ±.001 I I R RI RR X*.063 X I I R R RI.037 X R I 20 ulti-mode ocket erminus.123 I ±.020 R R X*.162 ± I I **.063 X I.037 X R I RI.069 ±.001 I RI RR I R.263 ±.004 mphenol ulti-hannel fiber optic connectors are supplied less contacts. Order multi-mode termini by mphenol part number designation as shown in the chart below. onsult mphenol, idney, Y for further availability. * Indicated dimension when fully assembled. ** lignment sleeve shipped unassembled. Ordering Information ulti-mode ermini ( 16) for mphe-ite onnectors iber ia Ref 20 ocket 20 in ore/ladding ia (icrons) Inches icrons 50/ / / dditional sizes available upon request: consult idney, Y for availability. ower contacts can be purchased separately, contact idney, Y. 19

22 mphe-ite eries fiber optic termini 90 multi-mode, size 16 mphenol provides 90, size 16 fiber optic termini that can be used with multi-channel cylindrical connectors. 90 ocket ermini ( 16) Ordering Information for 90 ulti-mode ocket ermini R. RI I***.500 RI R X ± X.**.557 ± R..675 X. iber ore/ladding ia (icrons) I. R ± ocket, 16 mphenol art umber or use in ylindrical onnectors ia Ref Inches icrons 50/ / / /140/ OR dditional sizes available upon request: consult mphenol, idney, Y for availability. * onsult mphenol, idney, Y for ordering information. ** Indicated dimension when fully assembled. *** hrink tubing and alignment sleeve are shipped unassembled. I ***.102 ±.001 I I ±.004 RI RR in ermini ( 16) Ordering Information for 90 ulti-mode in ermini iber ore/ladding ia (icrons) in, 16 mphenol art umber or use in ylindrical onnectors dditional sizes available upon request: consult mphenol, idney, Y for availability. * onsult mphenol, idney, Y for ordering information. ia Ref ax (Inches) Ref (Inches) Inches icrons 50/ / / /140/ OR / / / /140/ OR RI.500 RI R.102 ± I I I. R. RI RR X 20

23 mphe-ite eries application tools he following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing contacts incorporated in the mphe-ite eries connectors. or additional information on coaxial contact tools see catalog ll crimping tools included are the full cycling type. here is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. RO RII OO ontact /ype rimping ool urret ie or ositioner 12 in and ocket 22520/ / in and ocket 20 in and ocket 22 in 22 ocket 8 winax enter in and ocket 8 winax Intermediate Outer in & ocket 22520/ / / / / / / / / / / / / / / / / / / / / /5-200 here 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. he above crimping tools and positioners are available from the approved tool manufacturer. ontact /ype 8 oaxial Inner in and ocket 8 oaxial Outer in and ocket rimping ool 22520/ / / /10-01 urret ie or ositioner 22520/ /5-05 ie losure 22520/5-41 ie losure 22520/10-07 ie losure 16 oaxial Inner in and ocket 22520/ / oaxial Outer in and ocket 22520/ / oaxial Inner in and ocket 22520/ / oaxial Outer in and ocket 22520/ / (ower) se with ontact art umber lastic ools olor IRIO OO art umber ngle ype 21 etal ools roprietary art umber traight ype roprietary art umber 10 (ower) 81969/14-05* ray / (hite) 81969/8-11 reen /14-04* Yellow / (hite) 81969/ Yellow /14-03* lue / (hite) 81969/ lue /14-10* Red / (Orange) 81969/ Red /14-01* reen / (hite) 81969/ lack 8 oaxial one Required 8 winax one 81969/46-06** one Red se with ontact art umber lastic ools olor RO OO or nwired ontacts roprietary art umber art umber ngle ype etal ools roprietary art umber traight ype roprietary art umber 10 (ower) 81969/14-05* (ray) / hite 81969/8-12 reen / hite /14-04* (Yellow) / hite / Yellow / hite /14-03* (lue) / hite / lue / hite /14-10* (Orange)/ Red / Red / hite /14-01* (reen) / hite / reen / hite 8 oaxial 81969/14-12 reen one one R264-8 / 8 winax 81969/14-12 reen one 81969/46-12** / / he 81969/8, , ,and metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: ontact size , , , hen wire diameters exceed those specified, the plastic tools must be used. * ouble end insertion/removal tool. o be determined. ** winax insertion tools are available only in a straight type, metal version.. ontact aniels anufacturing o. for availability. olor olor

24 mphe-ite eries how to order mphenol mphe-ite omposite onnectors can be ordered by coded part number. Ordering procedure is illustrated by part number as shown below: onnector ype hell tyle ervice lass hell Insert rrangement ontact ype lternate ositions pecials ( ) onnector ype designates mphe-ite onnector eries hell tyle 00 designates wall mount receptacle 06 designates straight plug 07 designates jam nut receptacle ervice lass electroless nickel plated composite black composite, unplated X black zinc alloy, conductive, composite hell 9 thru 25 available Insert rrangement ee insert arrangement chart, page 3. ee insert configurations illustrated on pages 5-8. ontact ype designates standard 500 cycle pin contacts designates standard 500 cycle socket contacts lternate ositions ocksmith keying - rotation of minor keys. not required for normal position, see page 4. pecials pecials include optional contact styles and contact platings. lso includes a high decoupling style of mphe-ite. onsult mphenol, idney, Y for part numbering suffix for specials. tandard ackaging he mphe-ite eries is shipped with connectors and contacts packaged in bulk. onsult mphenol, idney Y for special packaging requirements 22

25 mphe-ite capabilities fiber optics, filter contacts, flex termination, coax contacts IR OI iber optic termini connectors offer a precision optic interconnect system within the mphe-ite connector. he mphe-ite connector provides protection from damage in severe environmental and physical conditions. Optical performance is optimized utilizing the ceramic alignment features employed by the termini. Insertion losses are typically.8d and can range from.5 to 1.5 d, depending on test conditions. ee pages for fiber optic termini features and how to order. sk for publication or contact idney, Y for more information on mphenol iber Optic onnectors. lso available with and termination within an mphe-ite shell kit. ontact mphenol, idney for more information. IR O OR I ROIO I shielding protection devices can be integrated into the mphe-ite connector to provide a cost effective alternative to discrete devices mounted inside the box. hese unique, high performance designs provide weight and space savings necessary for modern electronic systems. sk for publication or contact mphenol, idney, Y for complete information on mphenol ilter/ransient rotection onnectors. iber Optics ilter ontacts X RIIO I OR RI IRI OR IIO mphenol provides flex termination assemblies for printed circuit board attachment. lex circuits are available for mphe-ite connectors in flat or sculptured styles. culptured lexible ircuits with built-in terminations eliminate the failures associated with crimped or solder-on contacts, and they are designed to geometrically fit the tight space requirements within a unit. hey plug into a printed circuit board and create a self-locking terminal pad which eliminates the need for an additional interconnect to the. sk for catalog , mphenol ylindrical onnectors for pplications. lex ermination ssemblies OOR I OX O or shielded wire applications, coaxial contacts can be incorporated into mphe-ite connectors. esigned-in crimp or solder types are available to fit various R and special cables. igh performance coaxial contacts eliminate discontinuities or impedance variations due to movement of parts under axial load. or further information on coax contacts ask for catalog oax ontacts

26 mphe-ite eries capabilities ground plane connectors, twinax contacts, power contacts RO OOR mphenol offers mphe-ite connectors for data bus, and coax/triax/ twinax transmission lines with conductive inserts that ground the outer conductor of the coax, triax or twinax contact to the shell. hese connectors are sold less contacts. hey will accommodate size 8 coax, triax or twinax contacts or size 12 and 16 coax contacts. he insert availability chart on page 3 indicates the patterns that are available in a ground plane version, (see those designated with a star symbol), and consult mphenol, idney Y for ordering procedures. OOR I ORI IX O he size 8 concentric twinax contact was developed for use in I irborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connectors. he mphe-ite eries with concentric twinax contacts are ideal for communication data bus applications. he concentric twinax contact is crimp terminable to twisted-shielded cable. or further information on concentric twinax contacts ask for mphenol atalog round lane onnector with etallic Insert and oncentric winax ontacts OOR I R OO IX (R) O he R (Reduced omponent winax) contact meets I /90 and /91 requirements for intermateability and performance while reducing the number of user-assembled components from seven to three. he inner conductors and outer barrel of the R are each terminated to the cable by a crimp joint, so no costly assembly soldering operations are required. eatures include: hree user assembled components vailable in size 8 and size 10 contacts I--17/ cable termination or installation in mphe-ite connectors ermination completed in only two crimping operations Inner conductors stripped to common length, eliminating multiple measurements or further information on R contacts ask for mphenol atalog OOR I OR O 10 power, size 12 and size 16 contacts are available in many standard insert arrangements. hese contacts provide a wide range of power transmission capabilities. tandard contacts are gold plated to maintain a superior conductive surface. or further information on insert patterns that contain power contacts refer to the insert availability chart on page 3. oncentric winax ontacts Qualified to 39029/90 and /91 able rimp Intermediate Outer in errule & Inner ssembly ssembly R (Reduced omponent winax) ontact OOR OR R IR mphe-ite connector kits are also available with R and connector interfaces within the ruggedized mphe-ite connector shell. ontact mphenol, idney, Y for more information. 24 onnectors for R Interface