MIL-DTL Series I, II, III Connectors
|
|
- Magdalen Poole
- 5 years ago
- Views:
Transcription
1 LTL38 Series,, onnects Perfmance and aterial Specifications TRLS FSHS luminum Receptacle Grounded Plug luminum alloy luminum alloy* nsulat High grade plastic High grade plastic ontacts opper alloy, gold plate opper alloy, gold plate Grommet and Seal Silicone base elastomer Silicone base elastomer Jam ut luminum alloy Grounding Spring eryllium copper *Finish as noted in How To Order sections. omposite Receptacle Grounded Plug Thermoplastic Thermoplastic High grade plastic High grade plastic opper alloy, gold plate opper alloy, gold plate Silicone base elastomer Silicone base elastomer eryllium copper LTRL T ontact : 22, 22*, 22*, 20, 16 and 12 ontact Rating and Wire ccomodation ontact and Test mps Wire 22 22* 22* *F reference only Service Rating Service Rating ltitude ated Unmated Sea Level ,000 ft ,000 ft ,000 ft. 800 Service Rating ated Unmated Test voltage, (rms), wk voltage to be determined by application Service Rating ated Unmated Service Rating ated Unmated Test ata Test escription urability Temperature Range Vibration Shielding ffectiveness rosion Resistant Fluid mmersion High mpact Shock ltitude Other nvironments Parameters 500 cycles of mating and unmating, 0 cycles f Series with spring fingers lass F, ; 65º (85ºF) to + º (+32ºF) lass ; 65º (85ºF) to + 0º (+302ºF) lass,w: 65º (85ºF) to + 5º (+347ºF) ated connects are vibrated with weights to simulate rear accessy loads to the following levels: Sine Vibration: Up to 60 G's Series & (at rated temperature Series ) ot applicable f Series. Random Vibration: 43.7 Grms at rated temperature Series 4.5 Grms at mbient Temperature Series & 43.7 Grms at mbient Temperature Series lass F: leakage attenuation, greater than 0d at 100hz, greater than 65d at 10 GHz. to shell conductivity, 1.0 millivolt max. resistance. lass W: leakage attenuation, greater than 0d at 100 Hz, greater than 50d at 10 GHz. to shell conductivity, 2.5 millivolt max. lass, W, and Z will withstand 500 hours salt spray. lass, F,, will withstand 48 hours salt spray. onnects are fluid resistant to many fuels, solvents, coolants and oils. ated conects terminated with L cable and environmentally sealed backshells will withstand high impact shock per LS01. pplicable to Series & only. esigned to operate between sea level and 100,000 ft. above sea level. ated connects shall withstand sand and dust per method 0 of LST202 and be ice resistant. pplicable to Series & only. OT: F hermetic standard test data please consult TT. 4 imensions shown in inches (mm)
2 LTL38 Series omposite onnects How To Order ilitary omenclature OTOR TYP SHLL STYL SRV LSS (HRWR FSH) SHLL SZ OTT RRGT OTT STYL POLRZG POSTO OTOR TYP 38/ LTL38 Series SHLL STYL 38/20 Wall mount receptacle 38/26 Straight Plug, Grounded SRV LSS (Hardware Finish) J Olive drab cadmium over electroless nickel plate, 85ºF to +347ºF (65º to +5º) lectroless nickel 85ºF to +32ºF (65º to +º), RoHS ompliant OTT RRGT See pages 22,. OTT STYL H Pin conatcts (00 cycle) J Socket contacts (00 cycle) P Pin conatcts S Socket contact Less Pin contacts* Less Socket contact* * Used only when other than power contacts are to be installed (i,e., shielded, thermocouple, etc.) SHLL SZ F G H ilitary J esignation annon esignation POLRZG POSTO (nmal),,,,,. See page. ote: To der S connects less standard power contacts, purchase der must state Less ontacts. annon omenclature SRS PRFX KJ* Series Scoop proof, threaded coupling SHLL STYL 0 Wall mount receptacle 6 Straight plug LSS T nvironmentresistant (without rear accessy) * onsult facty f availability SRS PRFX SHLL STYL LSS SHLL SZ HRWR FSH OTT RRGT OTT STYL POLRZG POSTO OFTO O SHLL SZ annon esignation F G H J ilitary esignation HRWR FSH J Olive drab cadmium over electroless nickel plate, 85ºF to +347ºF (65º to +5º) lectroless nickel, 85ºF to +32ºF (65º to +º), RoHS ompliant OTT RRGTS See pages 22 and. KJ 0 T 35 P L OTT STYL H Pin conatcts (00 cycle) J Socket contacts (00 cycle) P Pin contacts S Socket contacts POLRZG POSTO (nmal),,,,. See page. OFTO O L Less contacts, not stamped on connect imensions shown in inches (mm)
3 LTL38 Series omposite onnects Wall ount Receptacle 38/20 KJ0T S Z R 1 R 2 THR W X. V THR TT 4 PLS T 4 PLS LU (TS RR RLS OTT RTTO SYST) R (FULLY T TOR ).0 X PL THKSS (including mounting hardware).520 (.20) X S size ode Thread lass 2 (Plated).600.1P0.3LTS (.000).005 (.0) R 1 R 2.7 (18.26).54 (.0) T TT S +_.012 (.300) (.100) (.100).002 (.050).002 (.050).38 (.83).6 (5.4) etric V Thread (Plated) 12X16g0.100R W ax. Z (.0).010 (.0) P0.3LTS.812 (20.62).7 (18.26) (26.).4 (4.3) X16g0.100R P0.3LTS.06 (.01).812 (20.62) 1.1 (28.58).4 (4.3) 18X16g0.100R P0.3LTS.6 (24.61).06 (.01) 1. (30.6).3 (4.3) 22X16g0.100R P0.3LTS (26.7).6 (24.61) (33.32).4 (4.3) X16g0.100R F P0.3LTS 1.6 (2.36) (26.7) (36.53).4 (4.3) 28X16g0.100R G P0.3LTS.736 (18.70) 1.0 (31.75) 1.6 (2.36) (3.67).4 (4.3) 31X16g0.100R.1 (4.35) H P0.3LTS.736 (18.70) (34.2) 1.0 (31.75) (42.88).4 (3.1).242 (6.) 34X16g0.100R.1 (4.35) J P0.3LTS.736 (18.70) (38.10) (34.2) (46.02).4 (3.1).242 (6.) 37X16g0.100R.1 (4.35) Straight Plug Grounded 38/26 KJ6T Q THR L LU (TS RR RLS OTT RTTO SYSTS V THR S size ode F G H J Perfmance SpecificationsPages 3 and 4. ontacts, Sealing Plugs, ssembly Tools Pages 24, 31, and 32. ontact rrangements Pages 22 and (.).000 (.000).8 (20.6).2 (.6) 1. (28.2) 1. (31.3) 1.35 (34.5) 1.46 (37.3) 1.5 (40.5) 1.72 (43.7) 1.84 (46.8) L ax. Q ia ax..858 (.8).84 (.0) 1.7 (2.4) 1.27 (32.5) 1.40 (35.7) 1.51 (38.5) 1.64 (41.7) 1.76 (44.) 1.88 (48.0) 20 imensions shown in inches (mm)
4 LTL38 Series,, onnects Polarizing Positions Series 5º RF Front face of receptacle (plug opposite). nsert arrangement does not rotate with main keykeyway. The master key is rotated to provide shell polarization; the min keys remain fixed. mal ngle of Rotation (egrees) 81º 75º 74º 80º 80º 67º 63º 61º 65º 65º 65º 6º 6º 1º 127º 12º 1º 1º 1º 1º 1º 1º 10º 1º 6º 1º 1º 1º 0º 0º Series 10º RF Front face of receptacle (plug opposite). nsert arrangement does not rotate with main keykeyway. The master key is rotated to provide shell polarization; the min keys remain fixed. mal ngle of Rotation (egrees) 86º 80º 7º 85º 85º 72º 68º 66º 70º 70º 70º 74º 74º 128º 2º 4º 0º 0º 0º 126º 126º 8º 4º 120º 1º 8º 8º 8º 1º 1º RPTL (Front face shown) R PLUG (Front face shown) P R KY Series R KYWY P P R P OTS 1. ll ngles are 2. The insert arrangement does not rotate with main key/keyway 3. ll min keys are rotated to provide shell polarization, the master key remains fixed at twelve o clock position. 4. Polarization is different from Series and. and and and Key & Keyway rrangement identification Letter Rº Pº Key Locations Rº Rº Pº Pº Rº Pº imensions shown in inches (mm)
5 LTL38 Series,, onnects ontact rrangements (ngaging View Pin nsert) * Socket insert only ** Pin insert only (ot available in socket insert Series and ) ndicates layouts are available in all shell styles including S274, S27508, KJ2 and KJ5 onsult facty S27505/KJL5 insert availability Series Series Series o. of ontacts # # # # # # # # ** 4 # #20 Series Series Series o. of ontacts # # # #20,1 # #20 # # Series Series Series o. of ontacts #20,4 # # # # #22 _ 1642 _ 42 #22 16 ** #20,2 #16 Series Series Series o. of ontacts ** 26 #20,2 # ** 2 #20, 1 #16 18 # # #22 Series Series Series o. of ontacts # # # #20,2 # #20 Series Series Series o. of ontacts 75 75* 4 #8 Twinax 22 # ** 32 # #22 22 imensions shown in inches (mm)
6 LTL38 Series,, onnects ontact rrangements (ngaging View Pin nsert) * Socket insert only ** Pin insert only (ot available in socket insert Series and ndicates layouts are available in all shell styles including S274, S27508, KJ2 and KJ5 onsult facty f S27505/KJL5 insert availability imensions shown in inches (mm) iltl388_20_layout 1 TT LU.indd 6/22/ 3:57 P
Cover headline Cover headline Style Connectors
over headline over headline 3Style onnectors annon 3Style Series,, onnectors TT annon connectors set the industry standard for performance and reliability in the most demanding conditions and harshest
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationMIL-C Series I, II, III Connectors
3 Series,, onnectors K/K/K SRS SRS SRS ROU RS (Standard on Series connector) S RWR is aluminum alloy SUOR O S S OS RY SOK O S SR U R assures positive retention with inwardly deflected tines that lock securely
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More information개요 ( Overview) YEONHAB PRECISION CO., LTD. Introduction. 개요 (Overview)
ntroduction 개요 (Overview) 3 기술적 정보 (Technical Data) 4 재질 (aterial) 5 접점사양 (Contact Part) 6 장비 (Tool) 7 키정렬 (Polarizing Position) 8 nsert Availability & dentification L-DTL-38999 Series 9 L-DTL-38999 Series
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationKJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features
Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes
More informationMIL-DTL-38999, Series III TV, Configurator Online at
ML-TL-, TV, onfigurat Online at www.amphenol-aerospace.com Now you can build a part number f Military ommercial ML-TL- through our online configurat, located on the home page of www.amphenol-aerospace.com.
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More informationKDB / VG Series
/ V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationMilitary Specification Cross Reference
--26482, eries 2 onnectors ntermatable with --26482 eries Operating temperature 55 to + 200 The onnector is designed to meet the rugged requirements o --26482, eries 2/--83723 eries *, the speciication
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationπ network filter insertion loss - attenuation (db)
MI/RFI Applications All electronics equipments Standards oncerned equipments : F, V, MIL-ST 461, GAMG 13 Typical performance capacitive filter π network filter escription Filter connectors have been developed
More informationFeatures and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
More informationITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationHIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
More informationIntegrated Backshell Fire Proof Connector
8535/8536 Series Integrated Backshell Connectors Integrated Backshell Fire Proof Connector Stainless steel screw coupling connector designed for use in aviation harsh environments. Perfect for engines
More informationMIL-DTL-83723, Series III, Matrix
MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationAmphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors
mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet
More informationAmphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
More informationSJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationHigh Density Interconnects
Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44
More informationOCS (Oval Contact System) Connectors
offers the High Perfmance Interconnect Solution f your High Speed Needs. The OCS* (Oval Contact System) is the newest 38999 Interconnect Product offering that provides many advantages f high speed data
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationMIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED
DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical
More informationQPL, general purpose, hermetic, filtered, lanyard released and custom solutions. MIL-DTL Series IV connectors and cable assemblies
QPL, general purpose, hermetic, filtered, lanyard released and custom solutions ML-DTL-38999 Series V connectors and cable assemblies ML-DTL-38999 Series V general purpose connectors Overview 8 Technical
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More informationMS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
More informationEnvironmental/Hermetic Connectors. MIL-DTL Series III and IV. Industry-Standard Military / Aerospace Harsh-Environment
nvironmental/ermetic onnectors I-T-38999 Series III and IV Industry-Standard ilitary / erospace arsh-nvironment OTOR 2017 RTI N NVIRONNT I-T-38999 Series III and IV The industry standard mil/ aero connector
More informationDMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE
MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc
More informationPlug MIL-DTL Type Fiber Optic Connector For use with MIL-T-29504/4 & /5 Termini
180-060-06 Plug MIL-TL-38999 Type iber Optic onnector or use with MIL-T-29504/4 & /5 Termini MIL-TL-38999 OW TO ORR: 180-060 XW 06--8 P N asic Number inish Symbol (Table II) onnector Style Alternate Key
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationCannon Mil-DTL Class G Space Grade Connectors. Interconnect Solutions
Cannon Mil-DTL 38999 Class G Space Grade Connectors Interconnect Solutions The Challenge Our traditional and longest served Space System customers approached ITT ICS regarding the deployment of Mil-DTL
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationAmphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder
mphenol J/J ubminiature ylindrical onnectors 2-090-7 mphenol J onnectors I--38999 eries II rimp and I--27599 eries II older mphenol J onnectors I--38999 eries I rimp and I--27599 eries I older mphenol
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationReverse Bayonet Coupling Connectors
Reverse ayonet oupling onnectors Series RoS ompliant onforming Standard -T-5015 Wa t e r p r o o f P67 P55 ock Type ayonet OUT series is a bayonet coupling connector which utilizes -T-5015 insert arrangements
More informationMIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
More informationmicro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999
micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationMIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
More informationKPSE High performance crimp contact connectors. 1 Standard MIL-C mates with any connector designed to MIL-C and VG
26482 eries onnectors igh performance crimp contact connectors igh performance crimp contact connectors igh performance rimp termination losed entry socket contacts eries environmental, miniature circular,
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationQUALIFICATION TEST SUMMARY REPORT ESR Qualification Type Testing of Amphenol Corporation s 2M801 Series Connector
Page 1 of 13 QUALIFICATION TEST SUMMARY REPORT ESR-9389 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
More informationElectrical Dielectric withstanding Altitude Service At ground 1500 Vrms m 600 Vrms m 400 Vrms m 200 Vrms
Applications Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Description Screw
More informationPEGASUS SERIES. Amphenol Pcd. Amphenol Pcd
PEGASUS SERIES Amphenol Pcd Amphenol Pcd is one of the world s leading suppliers of interconnect products for Military, Commercial Aerospace and Industrial applications. Located north of Boston in Beverly,
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More informationThe CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com
Series t a lance Series Ruggedized High-Power Connectors The Series of heavy duty connectors is ideal for rugged industrial or military applications that demand high-power delivery. Standardized parts
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationAmphenol. AC and SAE AS50151 Threaded Standard Cylindrical Connectors.
mphenol and 50151 ed tandard ylindrical onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. able of ontents age mphenol eries onnectors Introduction/eneral
More informationS Rear Panel Float Mount Plugs
How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies
More informationM300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
More informationFeatures and Application
ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly
More informationGlenair Environmental and Hermetic MIL-DTL Type Bulkhead Feed-Thrus
lenair Environmental and Hermetic MIL-DTL-38999 Type ulkhead eed-thrus SETION E TALE O ONTENTS LENAIR MIL-DTL-38999 TYPE ULKHEAD EED-THRUS: MIL-DTL-38999 Type ulkhead eed-thru Product eatures...e-1 231-103-H7
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More informationDT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
More informationMIL-C Circular Connectors
MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers
More informationMICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More information38999 All In One! Series III Integrated Backshell
38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell
More informationMIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol
mphenol --5015, atrix O O --5015, atrix esign haracteristics, ustomer Options. 433 nsert vailability and dentification. 434, 435 nsert rrangement rawings. 436-444 lass escriptions, erformance pecifications.
More informationRevolution. Severe Environments: - Shock and vibration. Rock Solid Coupling: - Ensures metal-to-metal bottoming
mpheol ual k Revolutio Severe viromets: - Shock ad vibratio Rock Solid ouplig: - sures metal-to-metal bottomig mpheol H ualok ccessies quaco P otacts oects Light Weight: - Hybrid composite/metal desig
More informationA B C D E F G H J K L M N
icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated
More informationMicro-D Metal Shell -.050" Contact Spacing
Micro Metal Shell.050" ontact Spacing Specifications connectors are used in applications requiring highly reliable, extremely small, lightweight connectors with higher density contact configurations than
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationMade to order cable assemblies
Think he ll ever break that hold? Nope. He s got him in a ull Nelson. SRIS 80 Made to order cable assemblies Nothing quite says "turnkey" like a factory-terminated and -tested Mighty Mouse ordset. rom
More information- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationMIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
More informationconnectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
More informationMIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
More informationfor Quadrax and ELIO 8
1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467
More informationMIL-DTL-83723, Series III, Pyle
ML-DTL-83723, Series, TLE OF CONTENTS ML-DTL-83723, Series, : Design Features, Customer Options, Manufacturer s Specifications.... 363, 364 Quick Reference of Choices - Threaded Styles............... 365-367
More informationMIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol. New Featured
mphenol --5015, atrix ew eatured O O --5015, atrix able of ontents. 170 esign haracteristics, ustomer Options. 171 nsert vailability and dentification. 172, 173 nsert rrangement rawings. 174-182 lass escriptions,
More informationMIL-DTL Micro-D Connector
Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z
More information