Amphenol. Amphenol Amphe-Lite Subminiature Cylindrical Connector
|
|
- Ruth Horn
- 6 years ago
- Views:
Transcription
1 mphenol mphenol mphe-ite ubminiature ylindrical onnector mphenol 97 eries onnectors are recognized and recognized.
2
3 or additional information on the mphenol mphe-ite eries of connectors, or for special application requirements, contact your local mphenol sales office, authorized distributor, or - PO ORPORIO mphenol Industrial Operations 191 elaware venue idney, Y elephone: ax: mphenol Industrial operates Quality ystems that are ertified to IO-9001 and by third party Registrars.
4 mphe-ite eries mphenol s ultimate commercial subminiature connector oupling ut Quick oupling hread ommercial 38999, eries III ype omposite onnectors he mphe-ite onnector eries is designed for communications equipment manufacturers with signal, power, R or fiber optic interconnect requirements in harsh environments such as communication towers, outdoor and roof-top applications. his commercial 38999, eries III type composite connector series is ideal for communications equipment, manufacturing process control and medical equipment. he mphe-ite offers the highest performance capabilities for severe environment applications, and yet is cost effective enough for general duty and non-environmental applications. he mphe-ite is Recognized, file Ro ompliant Product vailable - onsult mphenol Industrial Operations. eatures and enefits of the mphe-ite eries: ervice lass mphe-ite connectors provide excellent I shielding and grounding through electroless nickel plating and spring grounding rings. nvironmental sealing is ensured with interfacial seals to prevent contact corrosion. omposite shells are completely immune to corrosion problems. ervice lass provides a non-conductive shell when I shielding is not a criteria. lass omposite shells resist severe corrosion, and provide plating endurance from salt spray exposure for a minimum of 2000 hours. ompletely mates in one 360-degree turn of the coupling nut to provide the fastest and easiest equipment assembly and maintenance possible. cme threads provide coupling durability. hicker wall sections and a greater coupling surface area improve strength and shock resistance. lunting of the thread on both the coupling nut and receptacle eliminates cross coupling. Recessed pins minimize potential contact damage in this 100% scoopproof connector. In a blind mating application, mating shells cannot scoop the pins and cause a shorting or bending of contacts. rigid dielectric insert with excellent electrical characteristics provides durable protection to the contacts. he socket contacts are probe proof, and all contacts are rear insertable and rear removable. vailable in sizes 10 power, 12, 16, 20 and 22 contacts are plated in the standard 50 micro inches minimum gold, with 100 micro inches as an option. Optional eatures: onductive and non-conductive options are available. ee pg. 22. mphe-ite connectors allow for use of many contact types: fiber optics, shielded coaxial, twinax ground plane versions, and power contacts. (ee pages 23, 24). onsult mphenol Industrial for more information on combinations of different types of contacts in one connector shell - what mphenol calls their new ombo- inserts. on-magnetic mphe-ite is a new variation - mphenol offers one of the few 100% non-magnetic connectors with high contact density available today. ee page 24. mphenol / Ro 2002 / 95 / Plug hell pring ingers (I) mphe-ite hell tyles Ratchet nti-ecoupling evice esigned for Performance umerous advantages in performance capability are designed into the mphenol mphe-ite onnector. positive shoulder to shoulder coupling design, grounding fingers, and electroless nickel plating provide superior I shielding capability of 65 d minimum at 10 z. wall mount receptacle straight plug jam nut receptacle 11
5 mphe-ite eries performance criteria, specifications mphenol mphe-ite connectors provide I shielding capability which exceeds I eries III requirements. he mphe-ite connector with I grounding fingers and conductive finishes has proven to be the ultimate in I shielding effectiveness. he charts at right illustrate shielding effectiveness data which is typical of connectors tested with the nickel finish over a wide frequency range. hese capabilities along with a 125 temperature rating and superior moisture sealing protection provide the user with a connector that can withstand the most rigorous application. RI rating is 105. d YPI II I I hielding ffectivess d esting by riaxial ethod hielding ffectiveness mphe-ite onnectors (ickel inish at 55 to +125 ) ontact ize * When using silver plated wire. O RI est urrent aximum illivolt rop rimp* rimp ermetic (Power) rimp Well ata ontact ize Well iameter ominal Well epth ± ± ± ± (Power).137 ± ervice Rating PRR RI ervice lass RI RI uggested Operating oltage (ea evel) (R) emperature Range -55 to to to to +125 est oltage (ea evel) R R I R II R ** Please note that the establishment of electrical factors is left entirely in the designers hands, since he is in the best position to know what voltage, switching surges, transients, etc. can be expected in a particular circuit. d RQY RZ RQY IRZ 2 YPI II I I hielding ffectivess d esting by ode tirring ethod hielding ffectiveness mphe-ite onnectors (ickel inish at 55 to +125 ) est data beyond 2z is subject to equipment variation. II mphe-lite connectors are available in the following finishes: onductive lectroless ickel Plated omposite (ervice lass ) lack omposite, unplated (ervice lass ) ee how to order page 22. 2
6 mphe-ite eries insert availability and identification hell ize/rrg. ervice Rating otal ontacts I I I I I I I I, iber Optic 4 2* I ontact ize 12 (oax) 10 (Power) 8 (oax) 8 (winax) I I II I I I I I II I I II I I II I I (ee ote) II I I I I * I I I I I I I * round plane proprietary option available. rrg. 9-5 is exclusively ground plane type. ee page 24 for further information of ground plane connectors. wo size 16 contacts dedicated to fiber optics. onsult idney, Y or catalog for fiber optic information or R180/ and R195/ cables only. (ontact idney, Y for other cable application). ize 8 oax and winax are interchangeable.
7 mphe-ite eries alternate insert positioning hell ize R Y/YWY POIIO ey & keyway arrangement identification letter R or P R or P R or P R or P plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. 9 11, 13, and and 19 21, 23, and R R R R I YWY P (front face shown) RP (front face shown) I YWY P P P P 4 4
8 mphe-ite eries insert arrangements front face of pin inserts illustrated Insert rrangement ervice Rating I I I I I I umber of ontact ontact ize R P P R Insert rrangement ervice Rating I I, iber Optic I I I II I I umber of ontacts ontact ize edicated to iber Optics P R Insert rrangement ervice Rating I I I umber of ontacts ontact ize winax 12 R P a b Z c Y W X P R R P Y Z X W Insert rrangement ervice Rating II oax I I umber of ontacts ontact ize oax 8 oax O
9 mphe-ite eries insert arrangements front face of pin inserts illustrated f W R e f h g P d j W g c b X h Y a Z R Insert rrangement ervice Rating II I I umber of ontacts ontact ize 16 8 oax R P W j X Y i k Z h r m a R g q n b P f c d e p W j X Y i k s Z m h t r a n R g q p b c P f e d Insert rrangement ervice Rating II I I umber of ontacts ontact ize W P X R Insert rrangement ervice Rating II umber of ontacts ontact ize 8 oax 8 winax ote: ize 8 cavities can be supplied with either twinax or coax per customer requirement. 6 6 O
10 mphe-ite eries insert arrangements front face of pin inserts illustrated R n P m p k W q z r h X y s g Y x t f w u a Z e v d b c W X m n p Y q k R z r Z j y a P s i x t b h w u c g v d f e Insert rrangement ervice Rating I I umber of ontacts ontact ize Z a Y w v b c X u x d W t y e s z f r g q h p k n m R P Insert rrangement ervice Rating I umber of ontacts ontact ize winax 8 winax R P Z a b c d q r s e w t p f n v u g k m h W P R Y X Insert rrangement ervice Rating I umber of ontacts ontact ize Power 22 8 winax O
11 mphe-ite eries insert arrangements front face of pin inserts illustrated R P Z Y X W 2 P Y X R Z W a Insert rrangement ervice Rating I I umber of ontacts ontact ize winax 12 oax oax (ocations and Y - edicated to iber Optics) R P b a Z f Y c d e X W f g e q R d P p c b W h k X r m Y n Z a Insert rrangement ervice Rating I I umber of ontacts ontact ize X Y Z W p n a m b w q k c v x r h d u t s g e R f P s r q p W t R z n m P y k h X u Y v Z a b w c d x e g f Z Y a v b X u c t W w d s x e PP r y f q z g p h n i R m k j P Insert rrangement ervice Rating I I I umber of ontacts ontact ize oax 20 oax contacts for R180 or R195 cable. 8 8 O
12 mphe-ite eries 00 wall mounting receptacle, composite 00 ( )* 00 ( )* 00 ( )* 00 ( )* 2 P R 1 2 P R 2 2 P R R IW OR IZ 8 OXI OY, RI O.909 X X 4 P P Z IW OR IZ 8 WIX OY, RI O X X X X * o complete order number, see page 22. hell ize hread lass 2 0.1P-0.3- (Plated) R 1 R Z Panel hickness ± Inches hell ize ll dimensions for reference only R 1 R 2 ax hread etric Z ±.13 illimeters X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g esignates true position dimensioning 99
13 mphe-ite eries 06 straight plug, composite 06 ( )* 06 ( )* 06 ( )* 06 ( )* IW OR IZ 8 OXI OY, RI O X X X X R Q R.359 X 9.12 X IW OR IZ 8 WIX OY, RI O X X * o complete order number see page 22. hell ize hread 0.1P (Plated) ll dimensions for reference only. Q ia Inches hell ize Q illimeters hread etric X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g 10 10
14 mphe-ite eries 07 jam nut receptacle, composite 07 ( )* 07 ( )* 07 ( )* 07 ( )* P I.062 I.125 X 1.57 I 3.18 X.378 X 9.60 X IW OR IZ 8 OXI OY, RI O.794 X X R 2 P R.091 X 2.31 X R IZ 9/ IZ 13/ X X IW OR IZ 8 WIX OY, RI O.940 X X * o complete order number see page 22. hell ize hread lass 2 0.1P-0.3- (Plated) ex ±.010 Inches hell ize ex ± illimeters hread etric X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g X1-6g ll dimensions for reference only. shaped panel cut-out dimensions to prevent connector from turning 11 11
15 mphe-ite accessories receptacle protection cap.578 X X.578 X X * ( ) with nylon braid * ( ).578 X X * ( ) PPROX PPROX * ( ) PPROX PPROX with nylon braid and metal ring attached * o complete order number, add shell size and suffix number. or example, shell size 11: hell ize hread lass 2 0.1P-0.3- ia. ia Inches 10-o inish uffix lack composite, unplated -( ) ll dimensions for reference only. hell ize ia illimeters ia
16 mphe-ite accessories plug protection cap X X * ( ) with nylon braid X X * ( ) with nylon braid and metal ring attached * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel, Inches hell ize hread lass 2 0.1P ia illimeters 10-o inish uffix lectroless nickel -( ) lack composite, unplated -0( ) ll dimensions for reference only. hell ize ia
17 mphe-ite accessories dummy receptacle 2 P R 1 2 P R 2 2 P R W * ( ) 4 P P * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel, inish 10-o uffix lectroless nickel -( ) lack composite, unplated -0( ) hell ize hread lass 2 0.1P-0.3- (Plated) R 1 R 2 ± W ±.010 Panel hickness Inches hell ize ll dimensions for reference only. R 1 R 2 ± W ±.25 illimeters esignates true position dimensioning 14 14
18 mphe-ite accessories cable clamps RI Y * XXX R R 90 R OW Y * XXX IW * o complete order number, add shell size and suffix number. or example, shell size 11 with electroless nickel, o inish uffix lectroless nickel -( ) hell ize 1 in. ia. able 2 ia. able ia. ia. Inches hell ize 1 in. ia. able ll dimensions for reference only. 2 ia. able ia. ia. illimeters
19 mphe-ite eries contacts, sealing plugs, plastic dust caps R O R OR O P-I OR RI P-I RI ontact Pin Part umber Pin Pin Part umber ocket ocket Part umber ocket Part umber ize ize (250 ycles) Part umber (500 ycles) Part umber (250 ycles) (500 ycles) 8 (oax) 8 (oax) / / (winax) 8 (winax) / / (Power) 10 (Power) P31-10P P31-12P P31-16P P31-20P P31-22P bove part numbers include standard 500 cycle finish designation - gold bove plating part numbers over suitable include underplate standard 250 in cycle accordance finish designation with I-- - gold plating over suitable underplate cycle contacts available upon request. or other contact options available for use in mphe-ite connectors, or other contact options available for use in mphe-ite connectors, (thermocouple) consult our factory. (thermocouple) consult idney, Y. PI P hell ize Plug Receptacle or protection caps see pages 12 and 13. ontact ize I P Proprietary o. 8 (oax) (winax) P 10 (Power)
20 mphe-ite eries contacts printed circuit board, wire wrap P ocket ontacts ize O ail ia Wire Wrap ontacts ail quare ontact tickout ax/in (ee Illustration below) Items highlighted are most popular and most readily available. ll dimensions for reference only. onsult idney, Y for specific contact contour stickout data. designates o tickout. O I O ee also catalog , mphenol ylindrical onnectors for P pplications. his catalog provides the most commonly used insert pattern pin-out drawings which have been tooled for the purpose of attaching cylindrical connectors to printed circuit boards. P Pin ontacts ize ail ia PI ontact tickout ax/in (ee Illustration below) P socket and pin part numbers include finish designation - gold plating over suitable underplate in accordance with I or other finish variations, consult idney, Y. ote: 22 and 22 contacts are interchangeable. or other contact options available for use in mphe-ite connectors (thermocouple, fiber optic), consult idney, Y Wire Wrap ontacts ail quare
21 mphe-ite eries fiber optic termini multi-mode, size 16 mphenol ulti-mode, ize 16 ermini eatures and Performance evels: eramic alignment ferrule which precisely positions the fiber within the termini Phosphor bronze alignment sleeve, assembled on the socket after polishing insures accurate fiber to fiber alignment (a ceramic alignment sleeve is also available). ypical insertion loss for 100/140 fiber with.2 at 820 nm is.5 to.7 d using ir ap () polish technique se of the ceramic ferrule and sleeve maximizes the ability to hold extremely tight dimensional tolerances while maintaining accurate concentricity, thus providing superior and consistent optical loss performance. ermination accomplished using the industry proven epoxy/ polish method. an be polished ir ap () or Physical contact (P). ocket cleaning optional. onsult mphenol, idney, Y for termini cleaning tool. or application tools consult idney, Y. I OY PI RI RR PRI RI RR O POPOR ROZ I I OY ulti-mode ize 16 iber Optic ermini ize 16 ulti-mode Pin erminus.102 ±.001 I I R RI RR X*.080 X I I R R RI.040 X R I ize 16 ulti-mode ocket erminus.080 X I ± X*.162 ± I I **.040 X R I RI R R.102 ±.001 I RI RR I R.267 ±.003 mphenol ulti-hannel fiber optic connectors are supplied less contacts. Order multi-mode termini by mphenol part number designation as shown in the chart below. onsult mphenol, idney, Y for further availability. * Indicated dimension when fully assembled. Ordering Information ulti-mode ermini (ize 16) for mphe-ite onnectors iber ize ia Ref ize 16 ocket ize 16 Pin ore/ladding ia (icrons) Inches icrons 50/ / / /140/ /140/ / / / / dditional sizes available upon request: consult mphenol, idney, Y for availability. Power contacts can be purchased separately, contact mphenol, idney, Y
22 mphe-ite eries fiber optic termini multi-mode, size 20 mphenol ulti-mode, ize 20 ermini eatures and Performance evels: esigned for use in size 20 cavities of mphe-ite connectors esigned with similar high performance components as the proven size 16 termini omparable performance and reliability to the size 16 termini can be expected Offers increased termini density in mphenol mphe-ite connectors aintains fiber optic/electrical hybrid capabilities llows for multiple fiber accommodations ermination accomplished using the industry proven epoxy/ polish method. an be polished ir ap () or Physical contact (P). ocket cleaning optional. onsult mphenol, idney, Y for termini cleaning tool. or application tools consult idney, Y. I OY RI RR PI PRI RI RR O POPOR ROZ I I OY ulti-mode ize 20 iber Optic ermini ize 20 ulti-mode Pin erminus.069 ±.001 I I R RI RR X*.063 X I I R R RI.037 X R I ize 20 ulti-mode ocket erminus.123 I ±.020 R R X*.162 ± I I **.063 X I.037 X R I RI.069 ±.001 I RI RR I R.263 ±.004 mphenol ulti-hannel fiber optic connectors are supplied less contacts. Order multi-mode termini by mphenol part number designation as shown in the chart below. onsult mphenol, idney, Y for further availability. * Indicated dimension when fully assembled. Ordering Information ulti-mode ermini (ize 20) for mphe-ite onnectors iber ize ia Ref ize 20 ocket ize 20 Pin ore/ladding ia (icrons) Inches icrons 50/ / / dditional sizes available upon request: consult idney, Y for availability. Power contacts can be purchased separately, contact idney, Y
23 mphe-ite eries fiber optic termini 90 multi-mode, size 16 mphenol provides 90, size 16 fiber optic termini that can be used with multi-channel cylindrical connectors. 90 ocket ermini (ize 16) Ordering Information for 90 ulti-mode ocket ermini R. RI I***.500 RI R X ± X.**.557 ± R..675 X. iber ize ore/ladding ia (icrons) I. R ± ocket, ize 16 mphenol Part umber or use in ylindrical onnectors I *** Inches ia Ref icrons 50/ / / /140/ OR dditional sizes available upon request: consult mphenol, idney, Y for availability. * onsult mphenol, idney, Y for ordering information. ** Indicated dimension when fully assembled. *** hrink tubing and alignment sleeve are shipped unassembled..102 ±.001 I I ±.004 RI RR Pin ermini (ize 16) Ordering Information for 90 ulti-mode Pin ermini iber ize ore/ladding ia (icrons) Pin, ize 16 mphenol Part umber or use in ylindrical onnectors Inches dditional sizes available upon request: consult mphenol, idney, Y for availability. * onsult mphenol, idney, Y for ordering information. ia Ref icrons ax (Inches) Ref (Inches) 50/ / / /140/ OR / / / /140/ OR RI.500 RI R.102 ± I I I. R. RI RR X 20 20
24 mphe-ite eries application tools he following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing contacts incorporated in the mphe-ite eries connectors. or additional information on coaxial contact tools see catalog ll crimping tools included are the full cycling type. here is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. RO RIPI OO ontact ize/ype rimping ool urret ie or Positioner 12 Pin and ocket 22520/ / Pin and ocket 20 Pin and ocket 22 Pin 22 ocket 8 winax enter Pin and ocket 8 winax Intermediate Outer Pin & ocket 22520/ / / / / / / / / / / / / / / / / / / / / /5-200 Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. he above crimping tools and positioners are available from the approved tool manufacturer. ontact ize/ype 8 oaxial Inner Pin and ocket 8 oaxial Outer Pin and ocket rimping ool 22520/ / / /10-01 urret ie or Positioner 22520/ /5-05 ie losure 22520/5-41 ie losure 22520/10-07 ie losure 16 oaxial Inner Pin and ocket 22520/ / oaxial Outer Pin and ocket 22520/ / oaxial Inner Pin and ocket 22520/ / oaxial Outer Pin and ocket 22520/ / (Power) P P-1 IRIO OO Plastic ools etal ools se with ngle ype traight ype ontact Proprietary Proprietary ize Part umber olor Part umber Part umber Part umber olor 10 (Power) 81969/14-05* ray / (White) 81969/8-11 reen /14-04* Yellow / (White) 81969/ Yellow /14-03* lue / (White) 81969/ lue /14-10* Red / (Orange) 81969/ Red /14-01* reen / (White) 81969/ lack 8 oaxial one Required 8 winax one 81969/46-06** one Red RO OO Plastic ools etal ools or nwired ngle ype se with ontact ize Part umber olor ontacts Proprietary Part umber Part umber Proprietary Part umber traight ype Proprietary Part umber olor 10 (Power) 81969/14-05* (ray) / White 81969/8-12 reen / White /14-04* (Yellow) / White / Yellow / White /14-03* (lue) / White / lue / White /14-10* (Orange)/ Red / Red / White /14-01* (reen) / White / reen / White 8 oaxial 81969/14-12 reen one one R264-8 / 8 winax 81969/14-12 reen one 81969/46-12** / / he 81969/8, , ,and metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: ontact size , , , When wire diameters exceed those specified, the plastic tools must be used. * ouble end insertion/removal tool. ** winax insertion tools are available only in a straight type, metal version o be determined. ontact aniels anufacturing o. for availability.
25 mphe-ite eries how to order mphenol mphe-ite omposite onnectors can be ordered by coded part number. Ordering procedure is illustrated by part number P as shown below: onnector ype hell tyle ervice lass hell ize Insert rrangement ontact ype lternate Positions pecials P ( ) onnector ype... designates mphe-ite onnector eries hell tyle designates wall mount receptacle designates straight plug designates jam nut receptacle ervice lass.... electroless nickel plated composite shells, with fluorinated silicone rubber components for increased fluid resistance... electroless nickel plating composite shells, with dimethyl silicone rubber components.... black composite, unplated, with fluorinated silicone rubber components for increased fluid resistance... black composite, unplated, with dimethyl silicone rubber components hell ize 9 thru 25 available Insert rrangement ee insert arrangement chart, page 3. ee insert configurations illustrated on pages 5-8. ontact ype P.... designates standard 500 cycle pin contacts.... designates standard 500 cycle socket contacts.... designates pin P tail contacts loaded in connector (see page 17)..... designates socket P tail contacts loaded in connector (see page 17). lternate Positions ocksmith keying - rotation of minor keys. not required for normal position, see page 4. pecials. designates non-magnetic connectors. ee page 24 for description of the new non-magnetic product offering of 100% non-magnetic style mphe-lite connectors. Other specials include optional contact styles and contact platings. lso includes a high decoupling style of mphe-ite. onsult mphenol, idney, Y for part numbering suffix for specials. tandard Packaging he mphe-ite eries is shipped with connectors and contacts packaged in bulk. onsult mphenol Industrial, idney Y for special packaging requirements mphenol / Ro 2002 / 95 / Ro OPI Ro OPI PRO PRO I I - onsult - onsult mphenol mphenol Industrial Industrial Operations. Operations
26 mphe-ite capabilities fiber optics, coax contacts, flex termination, P tails IR OPI iber optic termini connectors offer a precision optic interconnect system within the mphe-ite connector. he mphe-ite connector provides protection from damage in severe environmental and physical conditions. Optical performance is optimized utilizing the ceramic alignment features employed by the termini. Insertion losses are typically.8d and can range from.5 to 1.5 d, depending on test conditions. ee pages for fiber optic termini features and how to order. sk for publication or contact idney, Y for more information on mphenol iber Optic onnectors. lso available with and termination within an mphe-ite shell kit. ontact mphenol, idney for more information. OOR WI OX O or shielded wire applications, coaxial contacts can be incorporated into mphe-ite connectors. esigned-in crimp or solder types are available to fit various R and special cables. igh performance coaxial contacts eliminate discontinuities or impedance variations due to movement of parts under axial load. or further information on coax contacts ask for catalog iber Optics and oax ontacts IR OOR OR I PROIO I shielding protection can be integrated into the mphe-ite connector with a planar array filter device. his provides a cost effective alternative to discrete devices mounted inside the box, and provides the weight and space savings necessary for modern electronic systems. mphenol s industrial connectors with filter protection are called the mphe-d eries; a family of popular industrial cylindricals that are enhanced to provide I protection. he mphe-d eries family includes the mphe-ite filter with a planar filter device and also I-5015 and I connectors which incorporate chip capacitor board filter devices. X RIIO I OR PRI IRI OR PPIIO mphenol provides flex termination assemblies for printed circuit board attachment. lex circuits are available for mphe-ite connectors in flat or sculptured styles. culptured lexible ircuits with built-in terminations eliminate the failures associated with crimped or solder-on contacts, and they are designed to geometrically fit the tight space requirements within a unit. hey plug into a printed circuit board and create a self-locking terminal pad which eliminates the need for an additional interconnect to the P. onsult mphenol Industrial Operations for information on mphe-ite connectors with flex circuits. mphe-d - mphe-ite onnector with Planar rray ilter P I O I P-I OOR nother mphe-ite option allowing for greater flexibility, is the jam nut with the stand-off adapter. his combination provides a means to fasten a P or rigid flex to the rear of a jam nut shell. hell style designator is a 0P. n example part number is 0P17-35P. onsult mphenol Industrial Operations for further information. mphe-ite am ut onnector with tand-off dapter and P ails lex ermination ssemblies ee catalogs online at
27 mphe-ite eries capabilities non-magnetic connectors, ground plane connectors, twinax contacts, power contacts O-I P-I OOR new product offering from mphenol is the non-magnetic mphe-ite style which is made of a durable corrosion resistant composite material for harsh environments.he same triple start thread used on standard mphe-ite connectors allows for complete mating in a single turn of the coupling nut. IP67 sealing grommets and interfacial seals are standard. It is an ideal solution for RI equipment in the medical market, and in other test equipment where a 100% non-magnetic multi-conductor connector is required. With up to 128 size 22 contacts in one connector, the mphenol non-magnetic mphe-ite is one of the few 100% non-magnetic connectors available today. It is available in a straight plug and three receptacle shell styles: wall mount, in-line and jam nut. on-magnetic styles are available with many of the standard mphe- ite inserts. wide variety of contact styles can be incorporated, and it can also be assembled with mphenol flex circuits. on-agnetic mphe-ite onnector with Power ontacts, iber Optics and lex ircuitry RO P OOR mphenol offers mphe-ite connectors for data bus, and coax/triax/twinax transmission lines with conductive inserts that ground the outer conductor of the coax, triax or twinax contact to the shell. hese connectors are sold less contacts. hey will accommodate size 8 coax, triax or twinax contacts or size 12 and 16 coax contacts. he insert availability chart on page 3 indicates the patterns that are available in a ground plane version, (see those designated with a star symbol), and consult mphenol, idney Y for ordering procedures. OOR WI ORI WIX O he size 8 concentric twinax contact was developed for use in I irborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connectors. he mphe-ite eries with concentric twinax contacts are ideal for communication data bus applications. he concentric twinax contact is crimp terminable to twisted-shielded cable. or further information on concentric twinax contacts ask for mphenol atalog OOR WI R OPO WIX (R) O he R (Reduced omponent winax) contact meets I /90 and /91 requirements for intermateability and performance while reducing the number of user-assembled components from seven to three. he inner conductors and outer barrel of the R are each terminated to the cable by a crimp joint, so no costly assembly soldering operations are required. eatures include: hree user assembled components vailable in size 8 and size 10 contacts I--17/ cable termination or installation in mphe-ite connectors ermination completed in only two crimping operations Inner conductors stripped to common length, eliminating multiple measurements or further information on R contacts ask for mphenol atalog ee catalogs online at 24 round Plane onnector with etallic Insert and oncentric winax ontacts oncentric winax ontacts Qualified to 39029/90 and /91 able rimp Intermediate Outer Pin errule & Inner ssembly ssembly R (Reduced omponent winax) ontact OOR WI POWR O ize 10 power, size 12 and size 16 contacts are available in many standard insert arrangements. hese contacts provide a wide range of power transmission capabilities. tandard contacts are gold plated to maintain a superior conductive surface. or further information on insert patterns that contain power contacts refer to the insert availability chart on page 3.
28 PO ORPORIO mphenol Industrial Phone: elaware venue idney, Y otice: pecifications are subject to change without notice. ontact your nearest mphenol orporation ales Office for the latest specifications. ll statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. tatements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. he user should not assume that all safety measures are indicated or that other measures may not be required. pecifications are typical and may not apply to all connectors mphenol 97 eries onnectors are recognized and recognized.
Please visit our Website at
able of ontents age o. mphe-ite* eries - mphenol s ltimate ommercial ubminiature onnector.......... 1 erformance riteria, pecifications............................ 2 Insert vailability and Identification............................
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationAmphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors
mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet
More informationAmphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder
mphenol J/J ubminiature ylindrical onnectors 2-090-7 mphenol J onnectors I--38999 eries II rimp and I--27599 eries II older mphenol J onnectors I--38999 eries I rimp and I--27599 eries I older mphenol
More informationAmphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationAmphenol Amphe-Armor Series Rugged Over-molded Connectors
mphenol mphermor eries ugged Overmolded onnectors rugged connector originally designed for the geophysical industry and the exploration of natural resources, where connectors are needed to withstand the
More informationAmphenol. AC and SAE AS50151 Threaded Standard Cylindrical Connectors.
mphenol and 50151 ed tandard ylindrical onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. able of ontents age mphenol eries onnectors Introduction/eneral
More informationAmphenol QWL Series Cylindrical Connectors Amphenol
mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,
More informationAMPHENOL CORPORATION Amphenol Industrial. Phone: Delaware Avenue Sidney, NY
O OOIO mphenol Industrial hone: -364-9011 191 elaware venue idney, Y 133-1395 www.amphenol-industrial.com otice: pecifications are subject to change without notice. ontact your nearest mphenol orporation
More informationWall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
More informationSJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
More informationAmphenol Tri-Start Subminiature Cylindrical Connectors
T mphenol Tri-tart ubminiature ylindrical onnectors 12-092-14 I-T-38999, eries III luminum tainless teel/irewall omposite lutch-ok igh Vibration This datasheet has been downloaded from http://www.digchip.com
More informationAmphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol
mphenol iniature ylindrical onnectors 12-070-15 eets I--26482, eries 1 pecifications mphenol Table of ontents age o. Introduction, mphenol iniature ylindrical eneral Information, esign lexibility...................1,
More informationMIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol. New Featured
mphenol --5015, atrix ew eatured O O --5015, atrix able of ontents. 170 esign haracteristics, ustomer Options. 171 nsert vailability and dentification. 172, 173 nsert rrangement rawings. 174-182 lass escriptions,
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
IOUIO etronics India, established as manufacturers of connectors in, has grown into a leading producer and exporter of I grade electrical connectors and related accessories. etronics India's continuing
More informationAmphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol
W. WWW.100Y.O WWW.100Y.O. WWW.100Y.O. WWW mphenol iniature ylindrical onnectors 12-070-15 W WWW.100Y.O. WWW.100Y.O eets I--26482, eries 1 pecifications.t.t.t O. WWW.100Y.O. WWW.100Y.O.T O. WWW.100Y.O.
More informationAmphenol Heavy Duty Cylindrical Connectors
mphenol eavy uty ylindrical onnectors 12-052-9 mphenol Inside over is lank able of ontents age mphenol eavy uty ylindrical onnectors, I--22992/roprietary esign haracteristics, nvironmental esting................................................................
More informationAmphenol Heavy Duty Cylindrical Connectors
mphenol Heavy Duty ylindrical onnectors 12-052-9 mphenol mphenol Heavy Duty ylindrical onnectors MIL--22992/Proprietary High urrent apacity Rugged onstruction Safety Serviceability mphenol meets the demands
More informationMIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol
mphenol --5015, atrix O O --5015, atrix esign haracteristics, ustomer Options. 433 nsert vailability and dentification. 434, 435 nsert rrangement rawings. 436-444 lass escriptions, erformance pecifications.
More informationBRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
More informationAmphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB
ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20
More informationMIL-DTL-22992, Class L
mphenol ML-DTL-22992, lass L TLE OF OTET HEVY DUTY, ML-DTL-22992, L L OETOR roduct Features, enefits and pecifications. 462 roduct ntroduction, Features. 463 nsert rrangements. 464, 465 lternate ing. 466
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
More informationMilitary Specification Cross Reference
--26482, eries 2 onnectors ntermatable with --26482 eries Operating temperature 55 to + 200 The onnector is designed to meet the rugged requirements o --26482, eries 2/--83723 eries *, the speciication
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationHIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
More informationQPL Qualified Product CATALOG
Q Qualified roduct TO ext3 eavy uty ylindrical onnectors I-T-22992, ext3 lass eavy uty onnectors are ruggedly constructed and tested to stand up to the rigors of unforgiving environments. This class represents
More information17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
More informationReverse Bayonet Coupling Connectors
Reverse ayonet oupling onnectors Series RoS ompliant onforming Standard -T-5015 Wa t e r p r o o f P67 P55 ock Type ayonet OUT series is a bayonet coupling connector which utilizes -T-5015 insert arrangements
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationHigh Density Interconnects
Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44
More informationAmphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
More informationMIL-DTL Series I, II, III Connectors
LTL38 Series,, onnects Perfmance and aterial Specifications TRLS FSHS luminum Receptacle Grounded Plug luminum alloy luminum alloy* nsulat High grade plastic High grade plastic ontacts opper alloy, gold
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More informationMIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
More informationMIL-C Series I, II, III Connectors
3 Series,, onnectors K/K/K SRS SRS SRS ROU RS (Standard on Series connector) S RWR is aluminum alloy SUOR O S S OS RY SOK O S SR U R assures positive retention with inwardly deflected tines that lock securely
More informationEnvironmental/Hermetic Connectors. MIL-DTL Series III and IV. Industry-Standard Military / Aerospace Harsh-Environment
nvironmental/ermetic onnectors I-T-38999 Series III and IV Industry-Standard ilitary / erospace arsh-nvironment OTOR 2017 RTI N NVIRONNT I-T-38999 Series III and IV The industry standard mil/ aero connector
More informationContact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
More informationElectrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationParameter Typical Maximum
TFOA-III 6 & 24-h Specifications TFOA-III The TFOA-III series of 6 & 24-channel fiber optic connectors are ideal for environmentally harsh conditions. The TFOA-III design utilizes the latest technology
More informationARINC 600 SERIES. Rack & Panel Rectangular Connectors. Selector Guide
ARIN 600 ERIE Rack & Panel Rectangular onnectors elector Guide ARIN 600 eries Overview Typical applications ockpit Display Units Mario Beauregard / Fotolia ourtesy of NORD-MIRO Picture All Rights Reserved
More informationKDB / VG Series
/ V 9523 Series ontents Introduction........................... 2 onnector design...................... 2 Technical data......................... 3 ounting dimensions.................. 5 ow to order..........................
More informationca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular
Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include
More informationKPSE High performance crimp contact connectors. 1 Standard MIL-C mates with any connector designed to MIL-C and VG
26482 eries onnectors igh performance crimp contact connectors igh performance crimp contact connectors igh performance rimp termination losed entry socket contacts eries environmental, miniature circular,
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationQUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
More informationContact resistance : environmental class hermetic class
525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationAmphenol Sidney, New York Facility
mphenol Sidney, New York Facility mphenol Industrial Operations was consolidated and made a separate division in 2001 in order to give increased focus on the commercial, industrial interconnect marketplace.
More informationHow to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
More informationModular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment.
GM Modular Bayonet connectors: a flexible solution for data and signals transmission in railways harsh environment. Passenger control Networking and lighting control Diagnostic support for brakes, motors
More informationMIL-DTL-38999, Series III TV, Configurator Online at
ML-TL-, TV, onfigurat Online at www.amphenol-aerospace.com Now you can build a part number f Military ommercial ML-TL- through our online configurat, located on the home page of www.amphenol-aerospace.com.
More informationLow Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
More informationDEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS
DUTH 936 I FO MIN ND OFFHO ITION Harsh nvironment, Flameproof onnectors for ugged eliability and afety MIN OI ND G /// 936 I ONTNT Introduction/pecifications 3 ynopsis / ing ystem 4-5 ontact rrangements
More informationMS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More informationPlug MIL-DTL Type Fiber Optic Connector For use with MIL-T-29504/4 & /5 Termini
180-060-06 Plug MIL-TL-38999 Type iber Optic onnector or use with MIL-T-29504/4 & /5 Termini MIL-TL-38999 OW TO ORR: 180-060 XW 06--8 P N asic Number inish Symbol (Table II) onnector Style Alternate Key
More informationTopside / Shipboard Environmental Connectors
eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using
More informationVEAM PT. VEAM PT Connectors VEAM PT. Series PT CPT. Military Spec Mil-DTL Series 1 Mil-DTL Series 1
eatures elector and uide enefits V PT eries PT PT ilitary pec il-t-26482 eries il-t-26482 eries arket ilitary/erospace ilitary/erospace oupling ayonet ayonet ax Temperature 25 25 ardware luminum luminum
More informationAmphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More informationACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED
DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationThe Amphe-Power Family of Connectors For High Power Applications
The mphe-ower amily of onnectors or igh ower pplications The mphe-ower Series consists of three of the time-tested and reliable families of mphenol Industrial onnectors, all of which are MI-5015 styles,
More informationA B C D E F G H J K L M N
icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationAmphenol EP-QUAD-10G Quad 10G Base-T to XAUI Converter
1 mphenol EP-QU-10G Quad 10G ase-t to XUI onverter mphenol erospace adds 10G ase-t to XUI onverter to the Electronics Product Family. This product line is rugged, flexible, and affordable with many options
More informationVNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationGecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
More informationDEUTSCH DBAS Series Connectors
DEUTSH DS Series onnectors Standards SE/S81703 Series III, UTE 93422 Model HE 311 Extreme Reliability in Harsh erospace and Military pplications EROSPE, DEENSE & MRINE /// DEUTSH DS SERIES ONNETORS DEUTSH
More informationDMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE
MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc
More informationMicrominiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
More informationDT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW
T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications
More informationMIL-DTL-83723, Series III, Pyle
TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference
More information3 million cycles. High Pressure Coolant Valve. SGH Series W (24 VDC) (With light/surge voltage suppressor: 0.58 W)
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationDT04 08P + W8P
Deutsch Connector Assortment Flip Kit *763354 This assortment contains 574 pieces/sets of widely used Deutsch Connectors. Flip Kits are handy both in the shop and the service vehicle. They are portable,
More informationA Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
More informationMIL-DTL-83723, Series III, Matrix
MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert
More informationFILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
More informationAmphenol Amphenol Pcd Terminal Junction Systems
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved
More informationFeatures and Application
ML-DTL- Features and Application MS2426*/AE66* Features and Application ML-DTL- family offers connectors with bayonet coupling as well as threaded coupling. These connectors are intermateable with correspondingly
More informationAmphenol MIL-DTL-83723, Series III, Pyle
Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded
More informationPART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
More informationKJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features
Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationDTP Series : Contacts (Open Barrel) Type Barrel Type GA Size
Deutsch Connectors DTP Series Deutsch s DTP Series connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed
More informationwww.amphenol-industrial.com UPC Series ABOUT US Amphenol Industrial Operations Amphenol Industrial Operation (AIO), a division of the Amphenol Corporation, is a prominent manufacturer of cylindrical connectors
More informationIsys Micro Series. Air Control Valves. Section E
Series ir ontrol Valves Section www.parker.com/pneu/micro X asic Valve unctions... asic Valve eatures... Product Overview... v harts...5 Plug-in Valve Part Numbers...6 Plug-in anifolds...7 Plug-in nd Plate
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationµcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationMIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
More information