Amphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder

Transcription

1 mphenol J/J ubminiature ylindrical onnectors mphenol J onnectors I eries II rimp and I eries II older mphenol J onnectors I eries I rimp and I eries I older mphenol

2 able of ontents escription age mphenol J/J eneral Information... J/J - he subminiature cylindrical for every application... 2 J/J - pecifications... 3 J/J - Insert availability and identification; alternate positioning...4, 5 J/J - Insert availability and identification... 6 J/J - Insert arrangements... 7 J - rimp, J00 (27472) wall mounting receptacle... 2 J - rimp, JQ00 (27497), wall mounting receptacle, back panel mounting... 3 J - rimp, J0, line receptacle... 4 J - rimp, J02 (27499), box mounting receptacle, J02 (2753) box mounting receptacle... 5 J - rimp, J02 (27508), box mounting recept., back panel mounting... 6 J - rimp, J06 (27473), straight plug... 7 J - rimp, J06 (27484), straight plug with grounding fingers... 8 J - rimp, J07 (27474), jam nut receptacle... 9 J - rimp, J07, jam nut receptacle, miniature jam nut mounting dimensions J - rimp, J08 (27500), 90 plug... 2 J - ermetic, J00 (27475), wall mounting receptacle J - ermetic, J02 (27476), box mounting receptacle J - ermetic, J07 (27477), jam nut receptacle J - ermetic, JI (27478), solder mounting receptacle J - ccessories, plug protection cap J - ccessories, receptacle protection cap J - ccessories, strain relief (crimp type) J - rimp, J00 (27466) wall mounting receptacle J - rimp, JQ00 (27656) wall mounting receptacle, back panel mounting J - rimp, J0 line receptacle... 3 J - rimp, J02 (27496) box mounting receptacle J - rimp, J02 (27505) box mounting receptacle, back panel mounting J - rimp, J06 (27467) straight plug J - rimp, J07 (27468) jam nut receptacle J - ermetic, J00 (27469) wall mounting receptacle J - ermetic, J07 (27470) jam nut receptacle J - ermetic, JI (2747) solder mounting receptacle J - ail afe, 88/ (2766) lanyard release plug... 38, 39 J - ail afe, lanyard release plug how to order... 40, 4 J - ccessories, plug protection cap J - ccessories, receptacle protection cap J - ccessories, strain relief (solder type) J/J - rimp contacts, printed circuit board, wire wrap contacts (sockets) J - rinted circuit board, wire wrap contacts (sockets) J/J - rinted circuit board, wire wrap contacts (pins) J/J - ccessories, Universal eader ssembly for flex print or mounting.. 48, 49 J/J - hermocouple contacts, plastic protection caps, sealing plugs J/J - pplication tools... 5 J/J - older contact connectors J/J - ow to Order pecials - J/J onnectors ypes - ilter, quacon and for attachment pecials - J/J round lane onnectors and shielded contacts ales Office and istributor isting umber age mphenol operates quality systems that are certified to IO 900: 2000 by third party registrars. O: he connector products in this brochure were formerly known as endix products. hese products are now manufactured and sold under the mphenol brand name. he name mphenol will replace the name endix on products and literature in the future. ee mphenol catalogs on-line at:

3 mphenol J/J high reliability and high contact density with maximum weight and space savings mphenol J onnector mphenol J and J eries subminiature cylindrical connectors are qualified to I *, eries I and II respectively. hese connectors were developed to meet the needs of the aerospace industries, and provided the impetus for development of the I specifications, which recently were superseded by I eeting or exceeding I requirements, mphenol J/J connectors feature: ightweight, pace aving esign ontact rotection - 00% scoop-proof J design prevents bent pins and short circuits during mating Quick ositive oupling - 3 point bayonet lock system ismating liminated - with 5 key/keyway design rror roof lternate ositioning - insured by different key/keyway locations I hielding - grounding fingers standard in J eries; optional in J eries ine hell izes and a Variety of hell tyles ontact Options - size 8, 0, 2, 6, 20, 22 and 22 rimp, older,, Wire wrap, oax, winax, riax, hermocouple, iber Optic and ilter ixed older ontacts - per I (see page 52 and mphenol roduct ata heet 58) ermetic - air leakage limited to X 0-7 cm 3 per second optional reakaway anyard elease tyle - available in J plugs. rovides quick disconnect of the connector plug and receptacle with axial pull on the lanyard. ee pages Inventory upport ommonality - uses standard I contacts, insert arrangements and application tools. o ompliant roduct vailable - onsult mphenol erospace Operations. mphenol o U / 2002 / / 95 mphenol J onnector or additional information on mphenol J/J connectors, or for special application requirements, contact your local sales office or: mphenol orporation mphenol erospace elaware venue, idney, Y elephone: ax: Where proof of high reliability and lot control is required, approved equivalents to most proprietary J and J connectors are available. * I eries I supersedes I eries I. I eries II supersedes I eries II.

4 J/J the subminiature cylindrical for every application Wall ounting eceptacle ox ounting eceptacle traight lug Jam ut eceptacle 90 lug older ounting eceptacle Wall ounting eceptacle ine eceptacle Jam ut eceptacle traight lug older ounting eceptacle anyard elease lug omponents hell components are impact extruded or machined bar stock aluminum. tandard plating on shell components is cadmium over nickel. any finishes are optional (see pecifications page 3). ermetic seal receptacles are available in carbon steel or stainless steel shells. ependable 5 key/keyway polarization with bayonet lock coupling is incorporated to aid and assure positive mating. Insert material is a rigid dielectric with excellent electrical characteristics, providing durable protection for molded-in solder type contacts. ontrasting letter or number designations are used on insert faces. fluorinated silicone interfacial seal wafer is featured on the mating face of crimp type pin inserts. his assures complete electrical isolation of pins when connector halves are mated. In addition, a main joint gasket is installed in the receptacle for moisture sealing between connector halves. oth features are also available for hermetic receptacles. ontacts aximum design flexibility is built into the J/J eries, with a minimum of 2 to a maximum of 28 circuits per connector in a wide variety of contact arrangements. ontacts are available in sizes 8, 0, 2, 6, 20, 22, 22 and 22 with standard 50 micro inch minimum gold plating (00 micro inches optional). ll socket contacts are probe proof. rimp type rear removable contacts are featured in J- and J- connectors. older termination contacts are also available, as well as, wire wrap, thermocouple, fiber optic, coaxial, triaxial and twinax contact options. Optional eatures igh temperature capability of 392 is available only in J or J crimp type connectors. igh temperature versions feature gold plated contacts, high temperature shell plating, stainless steel coupling nut spring, and epoxy inserts/fluorinated silicone grommet combination. tandard temperature capability for both solder and crimp is 302. he J or J type connectors are available for 2 O 4 resistance provided they are mated, and ungrommeted rear faces are suitably protected. or complete listing and definition of connector types, shell styles and service classes, see ow to Order, page 53. or information on ail-afe anyard elease style plugs see pages

5 J/J specifications aximum est urrent aximum illivolt rop ontact older & illivolt rop ize rimp ermetic rimp* older* ermetic* O I rimp Well ata older Well ata ontact Well ominal Well ominal ize iameter Well epth iameter Well epth ± (ower) ± ± ± ± ± (ower).37 ± * When tested using silver plated wire. VI I** uggested Operating Voltage ervice (ea evel) est Voltage est Voltage est Voltage est Voltage ating () (ea evel) 50,000 ft 70,000 ft 0,000 ft V 550 V 350 V 200 V V 400 V 260 V 200 V I V 600 V 400 V 200 V II V 800 V 500 V 200 V ** lease note that the establishment of electrical safety factors is left entirely in the designer s hands, since he is in the best position to know what peak voltage, switching surges, transients, etc. can be expected in a particular circuit. II luminum hell omponents on-ermetic uffix inish ilitary roprietary Indicated inish tandard for J ypes isted elow Indicated inish tandard for J ypes isted elow admium lated ickel ase () nodic oating (lumilite) () (005) hromate reated (Iridite 4-2) (0) Olive rab admium late ickel ase () (04) lectroless ickel () (023) J/J/J/J J/J/J J/J/J J/J J/J J/J ermetic onnectors uffix aterial/inish ilitary roprietary arbon teel hell in lated hell and ontacts Indicated inish tandard for J ypes isted elow J( )/J( )Y J( )/J( )Y Indicated inish tandard for J ypes isted elow J( )Y/J( ) arbon teel hell in lated hell and old lated ontacts () tainless teel hell () (62) old lated ontacts J( )Y J( )Y J( )Y 3

6 J/J insert availability and identification, alternate positioning J J ermetics lass lass older rimp Y* X / X X X X X X X X X X X X X X X X ** 3 X 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 2 2 X X X X X X X X X X X X X X X X X X X X X 2 X 3 2 X X otal ontact ize ervice on- 8 ating tacts (oax) I I 3 3 I 2 2 I 4 4 I 5 5 I I 6 6 I 7 7 II 3 3 I 4 4 I I 0 0 I 4 4 II 5 5 I 5 4 I 8 8 I I J KY/KYWY OIO O OIO (egrees) hell ize ormal plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angle for a given connector is the same whether it contains pins or sockets. Only the master key/keyway rotates in the shell, and the insert always remains in the same position relative to the minor keys. angles shown are viewed from the front face of the connector, a receptacle is shown below. he angles for the plug are exactly the same except the direction of rotation is opposite of that shown for the receptacle. 0 J O IV OI OIIO O O KYWY (front face of receptacle shown) OIO () in inserts only (consult mphenol, idney, Y for socket availability) (2) ot tooled for or 02 (3) in inserts only, not tooled for or 02 (consult mphenol, idney, Y for availability) * ame as with interfacial seal ** ooled with special terminal only (consult mphenol, idney, Y for availability of standard terminal) round plane proprietary option available. ee page 55 for further information on ground plane connectors.

7 J/J insert availability and identification, alternate positioning J J ermetics lass lass older rimp Y* X X X X X X X X X X X X X X X X X X X X X X X X X X X 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X otal ontact ize ervice on- 8 8 ating tacts (oax)(winax) I 6 6 II 8 8 I oax 4 2 oax I I II I I I I 8 8 I I II 6 6 I I I I I J KY/KYWY OIO O OIO (egrees) hell ize ormal plug with a given rotation letter will mate with a receptacle with the same rotation letter. he angle for a given connector is the same whether it contains pins or sockets. Only the master key/keyway rotates in the shell, and the insert always remains in the same position relative to the minor keys. angles shown are viewed from the front face of the connector, a receptacle is shown below. he angles for the plug are exactly the same except the direction of rotation is opposite of that shown for the receptacle. 5 J O IV OI OIIO O O KYWY (front face of receptacle shown) OIO () in inserts only (consult mphenol, idney, Y for socket availability) (2) ot tooled for or 02 (3) in inserts only, not tooled for or 02 (consult mphenol, idney, Y for availability) * ame as with interfacial seal round plane proprietary option available. ee page 55 for further information on ground plane connectors.

8 J/J insert availability and identification J ermetics otal ontact ize lass lasservice on J older rimp Y* ating tacts (oax) (winax) (ower) oax (ee ote 4) X 23- X 22-2 X X 23-2 X X X X 23-2 X X X X X X X X X X X X X X 24- X 25- X 24-2 X 25-2 X 24-4 X 25-4 X X X X X X X X X X X 25-6 X X II I 4 4 II 2 2 I I I I II 6 6 II I I I I I I I I 6 6 (ee ote 5) () in inserts only (consult mphenol, idney, Y for socket availability) (2) ot tooled for or 02 (3) in inserts only, not tooled for or 02 (consult mphenol, idney, Y for availability) * ame as with interfacial seal ** wo size 6 contacts dedicated to fiber optics. onsult mphenol, idney, Y or catalog section for fiber optic contact information. 6 or 80/U and 95/U cables only (consult mphenol, idney, Y for other cable applications) ize 8 oax and winax are interchangeable (4) connector 2-75 is supplied with four size 8 twinax contacts. roprietary connector 2-75 is supplied with four size 8 coax contacts. (5) connector 2-79 has provision for two size 8 coax contacts. oax contacts are not supplied unless specified by customer. round plane proprietary option available. ee page 55 for further information on ground plane connectors.

9 J/J insert arrangements front face of pin inserts illustrated black arrangements J or J green arrangements J only blue arrangements J only Insert rrangement (J) Insert rrangement (J) ervice ating I I umber of ontacts ontact ize Insert rrangement (J) Insert rrangement (J) ervice ating I I I I I I umber of ontacts ontact ize K J Insert rrangement (J) Insert rrangement (J) ervice ating II I I I I II umber of ontacts ontact ize K J K U J K U V J K J Insert rrangement (J) Insert rrangement (J) ervice ating I I I I I umber of ontacts ontact ize O

10 J/J insert arrangements front face of pin inserts illustrated black arrangements J or J green arrangements J only blue arrangements J only J K a b U Z c V Y W X K J Insert rrangement (J) Insert rrangement (J) ervice ating I II I oax I umber of ontacts ontact ize 22 8 winax oax 8 oax 22 8 oax Y U Z X W V K J J K U K J Insert rrangement (J) Insert rrangement (J) ervice ating I II umber of ontacts ontact ize winax U d c b a V e W Z X Y K J d c U e b V g f a W Z X Y K J U e V f d c j b g h W X a Y Z J K Insert rrangement (J) Insert rrangement (J) ervice ating I I I umber of ontacts ontact ize K J U J Insert rrangement (J) Insert rrangement (J) ervice ating I I umber of ontacts ontact ize O

11 J/J insert arrangements front face of pin inserts illustrated black arrangements J or J green arrangements J only blue arrangements J only J K K J K W a J V U X Y Z K X Y W b V a J Z U a Z Y d X K J b c U V W Insert rrangement (J) Insert rrangement (J) ervice ating I II I I I umber of ontacts ontact ize U V W j X Y i k Z h r m a g q n b f c d e p J K V W U j X Y i k s Z m h t r a n g q p b c f e d J K U V J K Insert rrangement (J) Insert rrangement (J) ervice ating I I II umber of ontacts (ee ote) ontact ize (ee ote) K J Insert rrangement (J) Insert rrangement (J) ervice ating I umber of ontacts ontact ize winax 2 ote: connector 2-75 is supplied with four size 8 twinax contacts. roprietary connector 2-75 is supplied with four size 8 coax contacts. connector 2-79 has provision for two size 8 coax contacts. oax contacts are not supplied unless specified by customer. 9 O

12 J/J insert arrangements front face of pin inserts illustrated black arrangements J or J green arrangements J only blue arrangements J only W X K V U J b a h c Z K g j d Y U f e J X W V d c k b j a K U e V f W l g X h Y Z J Insert rrangement (J) Insert rrangement (J) ervice ating II I I umber of ontacts ontact ize n U V k m p W q z r h X y s g Y x t f w u a Z K e v d b J c U V W X m n p Y q k z r Z j y a s i x t b h w u c g v d f e K J K J K J Insert rrangement (J) Insert rrangement (J) ervice ating I I II II umber of ontacts ontact ize Z a Y w v b c X u x d W t y e V s JJ z f r KK U g q h p k n m J K Insert rrangement (J) Insert rrangement (J) ervice ating I umber of ontacts ontact ize O

13 J/J insert arrangements front face of pin inserts illustrated black arrangements J or J green arrangements J only blue arrangements J only J K K U J V Z Y 4 7 X 3 K 5 U 6 2 W V J Insert rrangement (J) 24-9 Insert rrangement (J) ervice ating I umber of ontacts ontact ize 22 8 winax winax 2 oax (ocations U and Y - edicated to iber Optics) Y Z X W K J a V U b a Z K f Y J c d e X U V W U g f e q d p c b V W h k X r m Y n Z a K J Insert rrangement (J) Insert rrangement (J) ervice ating I I I umber of ontacts ontact ize X Y Z W p n a V m b U w q k c v x r h d u t s g e f J K U s r q p V W n m y k h t z X u Y v Z a b w c d x e g f J K Z Y a v b X u c t W w d s x JJ V e U r KK y f z q g p h n i J m k j K Insert rrangement (J) Insert rrangement (J) ervice ating I I I umber of ontacts ontact ize oax 20 oax contacts for 80 or 95 cable. O

14 J00 (27472) crimp wall mounting receptacle ±.03 () V KK 2 ().200 ±.03 * J00-XX-XXX(27472) ** J00-XX-XXX(27479) *** J00-XX-XXX * J00-XX-XXX (27472) ** J00-XX-XXX(27479) *** J00-XX-XXX (4 O) KK KK.200 ± ± I * J00-XX-XXX(27472) ** J00-XX-XXX *** J00-XX-XXX * J00-XX-XXX () ** J00-XX-XXX () *** J00-XX-XXX () * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. *** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. V hread ia. U KK KK 2 hell +.00 ia lass 2 KK ia. ia. ize.025 ±.00 ax. ax. ax. ax..005 () ±.06 ±.005 (lated) ax. ax. ax ll dimensions for reference only. 2

15 JQ00 (27497) crimp wall mounting receptacle (back panel mounting) X X. () KK 2 V X X. () * JQ00-XX-XXX(27497) ** JQ00-XX-XXX * JQ00-XX-XXX (27497) (4 O) KK KK X X. * JQ00-XX-XXX(27497) *JQ00-XX-XXX ().005 I * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. V hread ia. ia. ax. U KK KK 2 ia. hell +.00 ia anel ia. lass 2 ia. KK ia. ia ize.025 ±.00 ax. ax..005 hickness () ±.06 ±.005 (lated) ±.005 ax. ax. ax ll dimensions for reference only. 3

16 J0 crimp line receptacle.89 X..938 X KK V.580 ± ±.025 * J0-XX-XXX ** J0-XX-XXX *** J0-XX-XXX * J0-XX-XXX ** J0-XX-XXX *** J0-XX-XXX KK KK2.580 ±.025 * J0-XX-XXX ** J0-XX-XXX *** J0-XX-XXX.580 ±.025 * J0-XX-XXX () ** J0-XX-XXX () *** J0-XX-XXX () * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. *** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. V hread ia. ia. U KK KK hell ia lass 2 ia. ia. KK 2 ize ax. ± ax. ax (lated) ax. ax. ax ll dimensions for reference only. 4

17 J02 (27499) crimp box mounting receptacle J02 (2753) crimp box mounting receptacle () ± () KK (4 O) * J02-XX-XXX (27499) ** J02-XX-XXX *** J02-XX-XXX X..200 ±.03 KK * J02-XX-XXX (2753) ** J02-XX-XXX *** J02-XX-XXX.005 I * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. *** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. KK hell +.00 ia. ize ax..005 () ±.06 ±.005 ax ll dimensions for reference only. O: or applications requiring an environmental seal, please refer to J00, page 2. 5

18 J02 (27508) crimp box mounting receptacle (back panel mounting) () () KK (4 O) ± * J02-XX-XXX (27508) ** J02-XX-XXX *** J02-XX-XXX.005 I * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. *** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. ax. KK hell +.00 anel ia. ia. ia. ize ax..005 hickness () ±.06 ±.005 ±.005 ax ll dimensions for reference only. 6

19 J06 (27473) crimp straight plug 2 KK KK ± ±.025 Q * J06-XX-XXX () ** J06-XX-XXX () *** J06-XX-XXX () * J06-XX-XXX (27473) ** J06-XX-XXX *** J06-XX-XXX 3 KK V ± ±.025 * J06-XX-XXX (27473) ** J06-XX-XXX *** J06-XX-XXX * J06-XX-XXX (27473) ** J06-XX-XXX *** J06-XX-XXX * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. *** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. V hread odified ia. Q KK KK 2 hell ia. lass 2 odified ia. KK ia. ize ia..025 ax. ax. ax. ax. ax. U ajor ia. ax. ax. ax ll dimensions for reference only. 7

20 J06 (27484) crimp straight plug (with grounding fingers).938 X. KK Q OUI I ± * J06-XX-XXX (27484) ** J06-XX-XXX KK OUI I ± * J06-XX-XXX (27484) ** J06-XX-XXX OUI I ± V * J06-XX-XXX (27484) ** J06-XX-XXX * o complete order number see page 53. ** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. Q V hread odified KK KK hell ia. lass 2 odified ia. ia. ize ia. ax. ax. ax. U ajor ia. ax. ax ll dimensions for reference only. 8

21 J07 (27474) crimp jam nut receptacle I.**.09 X. O I I**.09 X. O I (2 ) KK KK 2 3 Z * J07-XX-XXX () *** J07-XX-XXX () **** J07-XX-XXX () * J07-XX-XXX (27474) *** J07-XX-XXX **** J07-XX-XXX Z I.**.09 X I.**.09 X. O I O I KK V Z ia. in. 3 lockwire holes. ormed lockwire hole design (6 holes) is optional. shaped mounting hole dimensions. * o complete order number see page 53. ** anel hickness *** igh temperature version; to complete order number see page 53. **** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. * J07-XX-XXX (27474) *** J07-XX-XXX **** J07-XX-XXX Z * J07-XX-XXX (27474) *** J07-XX-XXX **** J07-XX-XXX ia ex V hread KK KK 2 hread hell U Z KK ia. ia. (lated) ize.00 ax..025 ia..06 ax. ax. ax. ax. ± ± lass 2 ±.03 ax. ax. ax. lass U U U U U U U U U ll dimensions for reference only. 9

22 J07 crimp jam nut receptacle (miniature jam nut mounting dimensions) K O I KK K O I Z 2 * J07-XX-XXX *** J07-XX-XXX **** J07-XX-XXX KK K O I Z KK * J07-XX-XXX () *** J07-XX-XXX () **** J07-XX-XXX () Z * J07-XX-XXX.059 ia. in. 3 lockwire holes. *** J07-XX-XXX ormed lockwire hole design (6 holes) is optional. **** J07-XX-XXX shaped mounting hole dimensions. * o complete order number see page 53. *** igh temperature version; to complete order number see page 53. **** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. ia. ex K ia. anel hickness KK hell Z ia. KK hread ize.00 ax ax. ax. ax. ± in. ax. ± ±.026 ax. ax. lass U U U U U U U U U ll dimensions for reference only. 20

23 J08 (27500) crimp 90 plug * J08-XX-XXX ** J08-XX-XXX *** J08-XX-XXX ± Q K * J08-XX-XXX (27500) ** J08-XX-XXX *** J08-XX-XXX ± **** * o complete order number see page 53. ** igh temperature version; to complete order number see page 53. *** lear iridite finish (gold color), 2 O 4 resistant; to complete order number see page 53. **** imensions and X are applicable when the end of the screw is flush with the surface. Q X X hell K ia. in. ax. KK ize ±.00 ±.00 ax. ax. ax. able able ax. ax. ax ll dimensions for reference only. X **** X -- KK 2

24 J00 (27475) hermetic wall mounting receptacle () ± X () (4 O) V * J00-XX-XXX ** J00Y-XX-XXX (27475YXXXXX) *** J00Y-XX-XXX (27482YXXXXX).005 I * o complete order number see page 53. ** Interfacial seal wafer; to complete order number see page 53. *** igh temperature version, interfacial seal wafer with stainless steel shell; to complete order number see page 53. V hell +.00 hread ize ax..005 () ±.06 ±.005 lass U U U U U U U U U ll dimensions for reference only. 22

25 J02 (27476) hermetic box mounting receptacle () () KK (4 O) ± X * J02-XX-XXX ** J02Y-XX-XXX (27476YXXXXX) *** J02Y-XX-XXX (27476YXXXXX).005 I * o complete order number see page 53. ** Interfacial seal wafer; to complete order number see page 53. *** igh temperature version, interfacial seal wafer with stainless steel shell; to complete order number see page 53. KK hell ize () ±.06 ± ll dimensions for reference only. 23

26 J07 (27477) hermetic jam nut receptacle (2 ) Z.062 I.**.09 X O I * J07-XX-XXX *** J07Y-XX-XX (27477YXXXXX) **** J07Y-XX-XXX (27483YXXXXX).059 ia. in. 3 lockwire holes. ormed lockwire hole design (6 holes) is optional. shaped mounting hole dimensions. * o complete order number see page 53. ** anel hickness *** Interfacial seal wafer; to complete order number see page 53. **** igh temperature version, interfacial seal wafer with stainless steel shell; to complete order number see page 53. hell Z hread ize.00 ax..06 ± ± ax. lass U U U U U U U U U ll dimensions for reference only. 24

27 JI (27478) hermetic solder mounting receptacle KK ± X * JI-XX-XXX ** JIY-XX-XX (27478YXXXXX) *** JIY-XX-XXX (27503YXXXXX) * o complete order number see page 53. ** Interfacial seal wafer; to complete order number see page 53. *** igh temperature version, interfacial seal wafer with stainless steel shell; to complete order number see page 53. KK hell ize ll dimensions for reference only. Weld mounting hermetic receptacle also available. onsult mphenol, idney, Y for availability and dimensions. 25

28 J accessories plug protection cap.82 X I. * XXX (2750XX).562 X * XXX (27352XXX) or stamping identification, accessories must be ordered by part number. If ordered by 0- part number, they will be stamped with said number. * o complete order number, add shell size and suffix number. or example, shell size 0 with cadmium plate, nickel base would be , or ia. hell ia. ia ize ax. ax..06 pprox umber umber umber uffix uffix inish uffix with chain without chain hromate treat -XX0 nodic coating -XX5 XX XX admium plate nickel base -XX7 XX XX Olive drab, cadmium, nickel base -XX9 XX XX lectroless nickel -XX XX XX ll dimensions for reference only. 26

29 J accessories receptacle protection cap.82 X.53 X * XXX (275XXX) I. * XXX (27353XXX).78 X * XXX or stamping identification, accessories must be ordered by part number. If ordered by 0- part number, they will be stamped with said number. * o complete order number, add shell size and suffix number. or example, shell size 0 with cadmium plate, nickel base would be , 2750 or hell ia ize ax. pprox umber umber umber uffix uffix inish uffix with chain without chain hromate treat -XX0 nodic coating -XX5 XX XX admium plate nickel base -XX7 XX XX Olive drab, cadmium, nickel base -XX9 XX XX lectroless nickel -XX XX XX for 275 ll dimensions for reference only. 27

30 J/J accessories strain relief (crimp type) Y O * XXX (27506XXX-2 reference 85049/49) or stamping identification, accessories must be ordered by part number. If ordered by 0-part number, they will be stamped with said number. *o complete order number, add shell size and suffix number. 0-umber /49 inish uffix uffix uffix hromate treat -XX0 nodic coating -XX5 XX-2 (-2-XX) admium plate nickel base -XX7 XX-2 Olive drab, cadmium, nickel base -XX9 XX-2 (-2-XXW) lectroless nickel -XX XX-2 (-2-XX) or example: hell size 0 with cadmium plate, nickel base would be or 85049/49-2-0W Y hread (odified) ia. ia. hell +.00 ize odified crew ize.025 ax. ax. lass 2 inor ia..0 ize U U U U U U U U U U U U U U U U U U ll dimensions for reference only. ote: or solder type cable clamp XXX (85049/49) consult mphenol, idney, Y. 28

31 J00 (27466) crimp wall mounting receptacle X.656 X () VIW O OXI U OY V () ± *J00-XX-XXX (27466) *J00-XX-XXX (27466) (4 O) KK ± *J00-XX-XXX (27466).005 I * o complete order number see page 53. V hread KK hell ia. lass 2 ia. ize ia. ax () ±.06 ±.005 (lated) ax U U U U U U U U U.60 ll dimensions for reference only. 29

32 JQ00 (27656) crimp wall mounting receptacle (back panel mounting) Z X.844 X () VIW O OXI U OY V () * JQ00-XX-XXX (27656) * JQ00-XX-XXX (27656) X (4 O) Z KK * JQ00-XX-XXX (27656).005 I * o complete order number see page 53. ax V hread KK ia. hell ia anel +.0 ia. lass 2 Z ia ize ±.00 ax. ax..005 ia. hickness ().00 ±.005 (lated) ax ax U U U U U U U U U ll dimensions for reference only. ote: superseded

33 J0 crimp line receptacle.29 X ±.03 V.656 X * J0-XX-XXX * J0-XX-XXX VIW O OXI U OY * o complete order number see page 53. V hread ef. hell lass 2 ize ax ±.06 (lated) U U U U U U U U U ll dimensions for reference only. 3

34 J02 (27496) crimp box mounting receptacle J02 (27505) crimp box mounting receptacle (back panel mounting) X. ± () KK * J02-XX-XXX (27496) () X Z (4 O) KK * J02-XX-XXX (27505).005 I * o complete order number see page 53. ia. ax. KK ia. ia. hell anel +.0 ia. Z ize ax hickness ().00 ±.005 ± ll dimensions for reference only. 32

35 J06 (27467) crimp straight plug.29 X OUI I V.656 X ± Q * J06-XX-XXX (27467) * J06-XX-XXX (27467) VIW O OXI U OY OUI I KK ± * o complete order number see page 53. * J06-XX-XXX (27467) V hread KK hell Q lass 2 ia. ize ia. ax. ax. (lated) ax U U U U U U U U U.60 ll dimensions for reference only. 33

36 J07 (27468) crimp jam nut receptacle.328 X. ± V.00 ± I..25 X. IK.750 X. * J07-XX-XXX (27468) * J07-XX-XXX (27468) VIW O OXI U OY X. KK ± ± I..25 X. IK.059 ia. in. 3 lockwire holes. ormed lockwire hole design (6 holes) is optional. shaped mounting hole dimensions. * o complete order number see page 53. * J07-XX-XXX (27468) ex V hread KK hread hell lass 2 ia. lass 2 ize.00 ax. ia..06 ax..005 ± (lated) ax. (lated) U U U U U U U U U U U U U U U U U U ll dimensions for reference only. 34

37 J00 (27469) hermetic wall mounting receptacle.047 ±.005 () ± ± () (4 O) * J00-XX-XXX ** J00Y-XX-XXX (27469YXX) *** J00Y-XX-XXX (27469YXX).005 I * o complete order number see page 53. ** Interfacial seal wafer; to complete order number see page 53. *** igh temperature version, interfacial seal wafer with stainless steel shell; to complete order number see page 53. ia. hell +.00 ia. hread ize.005 () ±.06 ±.005 lass U U U U U U U U U ll dimensions for reference only. 35

38 J07 (27470) hermetic jam nut receptacle ± KK ± I..25 X. IK * J07-XX-XXX ** J07Y-XX-XXX (27470YXX) *** J07Y-XX-XXX (27470YXX).059 ia. in. 3 lockwire holes. ormed lockwire hole design (6 holes) is optional. shaped mounting hole dimensions. * o complete order number see page 53. ** Interfacial seal wafer; to complete order number see page 53. *** igh temperature version, interfacial seal wafer with stainless steel shell, to complete order number see page 53. ex KK hread hell lass 2 ize.00 ax..06 ax.005 ± (lated) U U U U U U U U U ll dimensions for reference only. 36

39 JI (2747) hermetic solder mounting receptacle KK * JI-XX-XXX ** JIY-XX-XXX (2747YXX) *** JIY-XX-XXX (2747YXX) * o complete order number see page 49. ** Interfacial seal wafer; to complete order number see page 49. *** igh temperature version, interfacial seal wafer with stainless steel shell; to complete order nunmber see page 49. ia. ia. ia. KK ia. hell ize ll dimensions for reference only. Weld mounting hermetic receptacle also available. onsult mphenol, idney, Y for availability and dimensions. 37

40 J reakaway ail afe quick-disconnect with an axial pull of lanyard mphenol J reakaway ail afe onnectors provide unequalled performance in environments requiring instant disengagement. esigned to provide quick disconnect of a connector plug and receptacle with an axial pull on the lanyard, the reakaway ail afe connector family offers a wide range of electrical and mechanical features: Instant decoupling and damage free separation ompletely intermateable with standard J receptacles Inventory support commonality through the use of standard insert arrangements and contacts reakaway un-mating is initiated by applying a pull force to the lanyard which causes the operating sleeve on the plug to move away from the receptacle. oupling segments on the plug then move away from the mating receptacle while expanding, thus releasing the receptacle. fter completion of the un-mating sequence, spring compression returns the sleeve and segments to their original positions. Un-mating of the plug may also be accomplished by normal rotation of the coupling ring without affecting the breakaway capability. he J reakaway ail afe connector features which provide I/ shielding in excess of I eries I requirements: olid metal-to-metal coupling I grounding fingers onductive finishes In addition to standard reakaway connectors, mphenol also manufactures custom breakaway connectors including those with: Increased pull-force capability ustom lanyard lengths and backshells ow force separation capabilities ow insertion/separation force contacts on-cadmium finishes ustom J eries reakaway designs have been developed for special applications; however the J eries is recommended over the J eries for the quick-disconnect breakaway style. ontact mphenol erospace for more information on breakaway, quickdisconnect connectors. Other mphenol cylindrical families (I eries III, I , I ) also offer breakaway quick-disconnect connectors. 38

41 J ail afe / (2766) lanyard release plug.275 X. OU V OV UI I OK I V I I Y U U I.500 ±.03 I. Y O OIY Y Y * o complete order number see page ax. V hread hell ia. ccessory U ize ax. ax. ia. ax. lass 2 (lated) ll dimensions for reference only. 39

42 J reakaway ail afe lanyard release plug insert availability, how to order ontact ize Insert ervice otal rrangement ating ontacts oax oax* winax -2 I I I I I II I I I I I II I I II 9-32 I I 2-6 II I I II I I I I I I I VIIIY I I * 25-6 I 6 6 J anyard eparation orces hell traight ull 5 egree ull ize (lbs. max.) (lbs. max.) * or 80/U and 95/U cables only. (heck mphenol erospace, idney, Y for other cable applications. or availability of other insert arrangements and accessories consult mphenol erospace. 40 I I O asic I art Insert umber rrangement 88/ II Y O anyard ength (in.) roprietary ±.250 ode o ode td ength

43 J reakaway ail afe lanyard release plug how to order, cont. OW O O - Y IIY U I 2766 umber ervice lass hell ize inish Insert rrangement ontact tyle olarizing osition umber umber designates I , eries I J anyard elease lug ervice lass for environmental crimp applications (inactive for new design) for environmental crimp applications with serrations on rear threads of shell hell ize I , sizes through 25 inish designates corrosion resistant olive drab cadmium plated aluminum, 500 hour extended salt spray, I shielding effectiveness 0 z specification min., 75 designates electroless nickel plated aluminum, 48 hour salt spray, I shielding effectiveness 0 z500 specification min., 200 hese are standard finishes. onsult mphenol erospace for variations. Insert rrangement I , see insert identification chart on page 40. ontact tyle designates anyard elease plug with pin contacts designates anyard elease plug with socket contacts olarizing ostion or alternate positions of connector (to prevent crossmating) see J key/keyway rotation description on page 5. (o letter is required for normal). OW O O - Y OIY U I O inish onnector ype Identification hell ize and Insert rrangement ode anyard ength ode ontact ype/lternate Insert otation inish 88 designates corrosion resistant olive drab cadmium plate over nickel, 500 hour extended salt spray, I 0 z specification min., 75 9 designates electroless nickel plated aluminum, optimum I shielding effectiveness 0 z specification min., 48 hour salt spray, 200 hese are standard finishes. onsult mphenol erospace, idney, Y for variations. onnector ype Identification 88/ designates I , eries I J anyard elease lug hell ize and Insert rrangement ode hell sizes are I , eries III from thru 25. he basic part number selected specifies the insert arrangement. ee able I (page 40) for coded part number that correlates to insert arrangement. anyard ength ode ee able II (page 40) for lanyard length code number. ontact ype/lternate otations designates pin, designates socket for normal positioning of contacts. When an alternate position of the connector is required to prevent cross-mating, a different letter (other than or ) is used. ee alternate positioning for J on page 5, then convert to mphenol proprietary coding by the following chart. in ontacts ocket ontacts etter mphenol etter etter mphenol etter (normal) (normal) I J K 4

44 J accessories plug protection cap.4 X * XXX.906 X.906 X * (2750XXX) * XXX (2750) * o complete order number, add shell size and suffix number. or example, shell size with cadmium plate, nickel base would be , 2750 or ia. hell ia. ia ize ef ax ± ll dimensions for reference only. 0- umber umber umber uffix uffix inish uffix with chain without chain hromate treat -XX0 nodic coating -XX5 admium plate nickel base -XX7 XX XX Olive drab, cadmium, nickel base -XX9 XX XX lectroless nickel -XX XX XX 42

45 J accessories receptacle protection cap * (27502XXX) OX * XXX OX * XXX (27502) * XXX or stamping identification, accessories must be ordered by part number. If ordered by 0- part number, they will be stamped with said number. * o complete order number, add shell size and suffix number. or example, shell size with cadmium plate, nickel base would be , or ia. hell +.00 ia. ize.000 ax ax. ax. ± ll dimensions for reference only. 0- umber umber umber uffix uffix inish uffix with chain without chain hromate treat -XX0 nodic coating -XX5 XX XX admium plate nickel base -XX7 XX XX Olive drab, cadmium, nickel base -XX9 XX XX lectroless nickel -XX XX XX 43

46 J accessories strain relief (solder type) Y * XXX or military type cable clamp see or 85049/49 on page 28. * o complete order number, add shell size and suffix number. inish hromate treat nodic coating admium plate nickel base Olive drab, cadmium, nickel base lectroless nickel 0-umber uffix -XX0 -XX5 -XX7 -XX9 -XX or example: hell size with cadmium plate, nickel base would be Y ia. hread ia. hell +.00 lass ize.025 ax. (lated) ax U U U U U U U U U ll dimensions for reference only. 44

47 J/J crimp contacts, printed circuit board, wire wrap contacts (socket) ontact J/J ins ize o. 8 (oax)* 39029/ (winax) 39029/90-529** 0 (ower) 39029/ / / / / / / J/J I O J ockets o / / / / / / J ockets o / / / / / / / / / I IUI O/WI W O J OK ontact tickout ax/in (ee Illustration) ail ontacts ize ia Wire Wrap ail ontacts quare O IKOU X. / I. ll dimensions for reference only. onsult mphenol, idney, Y for specific contact contour stickout data. designates o tickout. ee also catalog 2-70, mphenol ylindrical onnectors for pplications. his catalog provides the most commonly used insert pattern pin-out drawings which have been tooled for the purpose of attaching cylindrical connectors to printed circuit boards. bove part numbers include standard finish designation - gold plating over suitable underplate in accordance with I or other finish variations, consult mphenol, idney, Y. ote: 22 and 22 contacts are interchangeable. - o tickout * or use with 80/U and 95/U cable. or other size 8 coax or optional sizes 2 and 8 coax contacts available for use in J/J connectors, see catalog 2-030, or consult mphenol, idney, Y. ** or use with 7/ cable. Optional design - see slash sheet or further contact options available for use in J/J connectors (thermocouple, fiber optics), consult mphenol, idney, Y. 45

48 J wire wrap contacts (sockets) I IUI O/WI W O J OK ontact tickout ax/in (ee Illustration) ail J07 ontacts ize ia J00 JQ00 J02 J02 J06 (9-7) (9-25) Wire Wrap ail ontacts quare O IKOU X. / I. ll dimensions for reference only. onsult mphenol, idney, Y for specific contact contour stickout data. designates o tickout. ee also catalog 2-70, mphenol ylindrical onnectors for pplications. his catalog provides the most commonly used insert pattern pinout drawings which have been tooled for the purpose of attaching cylindrical connectors to printed circuit boards. bove part numbers include standard finish designation gold plating over suitable underplate in accordance with I or other finish variations, consult mphenol, idney, Y. ote: 22 and 22 contacts are interchangeable. o tickout or other contact options available for use in J connectors (thermocouple, fiber optic), consult mphenol, idney, Y. 46

49 J/J printed circuit board and wire wrap contacts (pins) I IUI O/WI W O, J/J I ontact tickout ax/in (ee illustration page 42) ail J07 ontacts ize ia J00 J00 JQ00 JQ00 J02 J02 J02 J02 J06 J06 J07 (9-7) (9-25) Wire Wrap ail ontacts quare bove part numbers include standard finish designation gold plating over suitable underplate in accordance with I or other finish variations, consult mphenol, idney,.y. ote: 22 and 22 contacts are interchangeable. o tickout or other contact options available for use in J/J connectors, (thermocouple, fiber optic, high speed coax, twinax, triax, quadrax and differential twinax) consult mphenol, idney, Y. 47

50 J/J accessories universal header assembly for flex print or board mounting ounts to all I and I onnectors he use of connectors with printed circuit termination is rapidly gaining popularity due to the rise of high volume, vapor phase or wave solder manufacturing processes. ermination of this style of connector to flex print or a printed circuit board represents a major cost in the manufacturing process for users. When adding flex or printed circuit board assemblies to an expensive filter or filter/transient protection connector, the total cost of a failed solder joint, a bent pin, or an unanticipated electrical failure becomes prohibitive. he universal header assembly from mphenol will provide for easy separation of the connector from the board on these occasions. eader ssemblies rovide ost avings Incorporation of the header assembly provides the user with time and cost saving potentials. hese header assemblies can be vapor phase or wave soldered to flex or printed circuit boards prior to the receipt of the I/ connector. eaders can be installed to standard connectors, allowing for electrical testing that would adversely affect the sensitive diodes, OV s or capacitors in the I/ connectors. xpensive connector assemblies can be easily removed from and reattached to the header assembly as the manufacturing process dictates. ounting pplications hell modifications are recommended, but are not necessary. he header assembly can be attached to connectors with standard flange placement or directly to the circuit board. he ideal application would involve either a single flange moved all the way to the rear of the connector or a double flange. inch nuts can be installed in either flange to allow easier mounting to the panel or the header assembly. he forward flange would mount the connector to the panel; the rear flange would be used to mount the header assembly. Various types of captivated or loose attaching screws can be utilized for unique applications. mphenol universal headers are slotted to allow mounting to all series of I or I connectors without special alterations. hey are of similar dimension as the flange of the mounting connector and would be approximately.85 inches (4.70 mm) thick. Incorporates a horter in/ocket ontact he heart of the header assembly is a short pin/socket contact. he tail of the contact would accommodate standard through-hole diameters and thickness of the flex or printed circuit board materials. he socket is imbedded in the molded material, making electrical engagement with the printed circuit tail of the connector. eaders provide easy separation of the connector from the board. ylindrical onfiguration 3 stickout dimensions are available. ize 22 contacts use.75 thick headers ize 6 to 20 contacts use.95 thick headers onsult mphenol, idney Y for additional configurations. eaders for cylindrical connectors accommodate up to 28 pins. ee pages 4- for J/J mating connector contact layouts. lso see catalog for I , eries III mating contact layouts and catalog for I mating contact layouts. ounting to ectangular I onnectors eaders for I connector arrangements accommodate up to 50 pins onsult mphenol, idney, Y for I configurations and detailed dimensions. aterials ody is molded from orlon or (olyphenylene ulfide) lectrical engagement areas of the header contact are plated with inches minimum of gold over inches minimum of nickel. 48

51 J/J accessories universal header assembly for flex print or board mounting, cont. he drawing below shows the standard universal adapter for use with I and I connectors. onsult mphenol erospace, idney Y for drawings of headers for I configurations. VIU IIO O O O O I (IZ & OIUIO OIO) 2 IZ 22 O VIW.020 ±.00 IU ssembly hell 2 art umber ize adius ±.005 ± XX( ) 8/ XX( ) 0/ XX( ) 2/ XX( ) 4/ XX( ) 6/ XX( ) 8/ XX( ) 20/ XX( ) 22/ XX( ) 24/ IKOU ( UIX OW) IZ 6 20 O VIW IKOU ( UIX OW).040 ±.00 (IZ 20).0625 ±.000 (IZ 6) ee uffix hart designates true position dimensioning. ssemblies containing ize 22 contacts only:.75 ssemblies containing ize6 or 20 contacts:.95 OW O O IOIO or Universal dapter Used with I onnectors Use coded number as follows: XX - XX X esignates mphenol Interface dapter hell size designation for I eries I, II. ee uffix chart. rrangement number - ee I--560 or I ee insert availability charts on pages 4-6. ontact tickout designation ee uffix chart. Universal adapters are also used with I eries III and with I , eries and 2. or how to order information on adapters to be used with I connectors, consult mphenol, idney Y. 49 Y U UIX hell ize rrangement ontact esignation* umber tickout** uffix*** uffix ±.05 tickout Insert rrangement uffix from I--560 or I--669 * hell size designation for I eries I, II, III and IV and I eries and 2. xamples: hell size 9 use 08. hell size 25 use 24. ** ize 22 contacts available in all 3 stickout lengths. ize 6 and 20 contacts available only in.85 and.270 lengths. *** Insert arrangement 4-97 and 5-97 are not available at this time. onsult mphenol, idney Y for information.

52 J/J thermocouple contacts, plastic protection caps, sealing plugs OOU O ontact J/J ize aterial ins hromel lumel Iron onstantan J ockets J ockets artial listing. If you do not see the contact for your application, consult mphenol, idney,.y. I OIO I U J J lug eceptacle ontact ealing lugs ize roprietary o o (oax) (winax) / (ower) /

53 J/J application tools he following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing the size 2, 6, 20, 22, 22 and 22 contacts incorporated in the J-, J- and I () series connectors as applicable. ll crimping tools included are the full cycling type and when used as specified in the installation instructions (-624 and ontact rimping urret ie ize/ype ool or ositioner 2 in and ocket 22520/ /-04 6 in and ocket 22520/ / / / / / in and ocket 22520/ / / / , 22, 22 in 22520/ / / / , 22, 22 ocket (J-) 22520/ / / / ocket (J-) 22520/ / / / winax enter in and ocket 22520/ / winax Intermediate 22520/ /5-200 Outer in & ocket II OO Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. he above crimping tools and positioners are available from the approved tool manufacturer. IIO OO covering the J-, J- and series connectors) will provide reliable crimped wire to contact terminations. here is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. or additional information on coaxial contacts, consult mphenol catalog section ontact rimping urret ie ize/ype ool or ositioner 8 (oaxial Inner in and ocket) 22520/ / / /5-05 ie losure 8 oaxial Outer in 22520/ /5-4 and ocket ie losure 22520/ /0-07 ie losure 6 oaxial Inner 22520/ /2-35 in and ocket 6 oaxial Outer 22520/ /4-02 in and ocket 2 oaxial Inner in and ocket 22520/ / oaxial Outer in and ocket 22520/ / (ower) lastic ools etal ools ngle ype traight ype Use with olor roprietary roprietary olor ontact ize art umber ode art umber art umber art umber ode 0 (ower) 8969/4-05* ray/white 8969/8- reen /4-04* Yellow/(White) 8969/ Yellow /4-03* lue/(white) 8969/ lue /4-0* ed/(orange) 8969/ ed /4-09 rown/(white) 8969/ rown 22, /4-0* reen/(white) 8969/ lack 8 oaxial one equired 8 winax one 8969/46-06** one ed OV OO lastic ools etal ools ngle ype or Unwired ontacts traight ype Use with olor roprietary roprietary roprietary olor ontact ize art umber ode art umber art umber art umber art umber ode 0 (ower) 8969/4-05* (reen)/white 8969/8-2 reen/white /4-04* (Yellow)/White / Yellow/White /4-03* (lue)/white / lue/white /4-0* (ed) Orange / ed/white /4-09* (rown)/white / rown/white 22, /4-0* (reen)/white / reen/white 8 oaxial 8969/4-2 reen one one -970 K264-8 / 8 winax 8969/4-2 reen one 8969/46-2** -970 / / he 8969/8, -8674, -8675, and metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: ontact size 2.55, 6.09, , 22, 22, When wire diameters exceed those specified, the plastic tools must be used. * ouble ended insertion/removal tool. ** winax insertion and removal tools are available only in a straight type, metal version. o be determined ontact aniels anufacturing o. for availability.

54 J/J solder contact connectors Wall ounting eceptacle J older traight lug mphenol J and J eries solder contact connectors are qualified to eries I and II respectively, of I hese connectors use a rigid, hard dielectric insert, which is molded around the pin and socket contacts. his permits a higher degree of pressurization across an interface, of up to x0-3 cc/sec. ontact positional tolerances are also considerably reduced, with less chance of pin bending. hell styles similar to I crimp connectors are available along with a large variety of contact sizes and insert patterns. complete line of accessories is also available. or additional information on mphenol J/J solder type connectors, ask for roduct ata heet 58. ontact your local sales office or mphenol orporation mphenol erospace elaware venue idney, ew York elephone: ax: Wall ounting eceptacle traight lug J older 52

55 J/J how to order umber ervice lass hell ize inish Insert rrangement ontact tyle ( or ) lternate Keying (o letter required for normal position) OIY U o more easily illustrate ordering procedure, part number J ( ) is shown as follows: U J ( ) /9 ee code below:. onnector ype: J designates standard Junior ri-ock connector J designates long Junior ri-ock connector J J designates high temperature connector J J designates chemical and fuel resistant J designates miniature mounting dimensions J designates miniature mounting dimensions - chemical resistant J designates miniature mounting dimensions - high temperature JQ JQ designates back panel mounted wall mounting receptacle J J designates back panel mounted box mounting receptacle J J designates back panel mounted - chemical resistant J J designates back panel mounted - high temperature J designates plug with grounding fingers* J designates plug with grounding fingers* - chemical resistant 2. hell tyle 00 designates wall mount receptacle 0 designates line mount receptacle 02 designates box mount receptacle 06 designates straight plug 07 designates jam nut receptacle 08 designates 90 degree plug I designates solder mount receptacle - hermetic anyard elease onnectors (ee pages 38-4 for ordering) 88 designates ail afe lanyard release plug with corrosion resistant olive drab cadmium plate over nickel shells 9 designates ail afe lanyard release plug with electroless nickel plated aluminum shells. 3. ervice lass: older contacts/connectors: for potting applications - hese connectors are supplied with a potting boot. ll shells are designed with integral featues to retain potting boots. for general applications. () - threaded rear design with strain relief. for pressurized applications () - threaded rear design with strain relief. box mount and thru-bulkhead only with no backend threads. for hermetic applications - used compression glass sealed inserts. eakage rate less than.0 micron cu. ft./hr. ( x 0-7 cc/sec.) at 5 psi differential. Y same as with interfacial seal. for applications - general duty, pressurized (receptacles only) IIY Y 3. ervice lass: rimp contacts/connectors: for potting crimp applications. upplied with spacer grommet and potting boot. for environmental crimp applications. upplied with a grommet and compression nut. an be supplied with strain relief integral with compression nut (). (J eries only). * electroless nickel plated ground plane aluminum, 200 W ** olive drab cadmium plated ground plane aluminum, 75 for environmental applications. upplied without rear accessories. esign provides serrations on rear threads of shells. or additional information defining description of service class, consult mphenol, idney, Y. 4. hell ize: J shell sizes available from 8 through 24. J shell sizes available from 9 through Insert rrangement: 22-2 designates insert arrangement. efer to pages 4- for insert availability. 6. ontact tyle: designates pin contacts; designates socket contacts. 7. lternate Keying: designates alternate keying connector assembly. Other basic alternate keys are, and. o letter required for normal (no rotation) position. ee pages 4 and train elief Option: designates a strain relief clamp. train reliefs are available only on, and class connectors. 9. inish Variation uffix: ee finish variations available in table below: ilitary inish inish inish lus inish ata uffix uffix admium plated nickel base () Olive drab cadmium plate nickel base (04) (386) lectroless nickel (023) (424) lectroless nickel, space compatible (453) (467) nodic coating (lumilite) (005) (300) hromate treated (Iridite 4-2) (0) (344) assivated steel ilitary ervice lass environmental, same as environmental, same as potting, same as Y hermetically sealed, same as Y or finish variations see above chart. or additional data, see page 3. or depictions and dimensional data see applicable il-pec. (I , I ). ilitary ail afe lanyard release plug ee pages 38-4 for ordering. * rounding fingers standard on all J plugs mphenol Vendor Identification/ ot applicable to box mounting style or J eries I. ot applicable to box mounting style. ** or more information on oax/riax/winax round lane onnectors, see page 55.

56 J/J specials - filter protection connectors, quacon connectors and for attachment I/I OIO ilter and/or voltage surge arresting devices are integrated into a J or an J connector to eliminate conventional bulky exterior filtering systems. his unique design reduces weight, space and user testing while providing system protection from I/. sk for publication 2-20 or contact mphenol, idney, Y for complete information on mphenol I ilter/ransient rotection onnectors. J with ilter rotection QUO pecially designed connectors for underwater and other fluid-immersion applications are available in all mphenol J/J insert arrangements. quacon J (immersible J) or (immersible J) series connectors offer 500 psi capability, visual mating indication to assure proper sealing upon mating, and design flexibility at low cost. orrosion resistant materials and environment-proof molded cable terminations provide a connector well suited to immersed usage. J and eries quacon onnectors represent the utmost in general purpose immersible connectors. efer to catalog 2-40 for additional data. J with ilter rotection X IIO I O I IUI O IIO lex circuits are available for I eries I and II connectors in flat and sculptured styles. mphenol provides flex termination assemblies for printed circuit board attachment through mphenol, dvanced ircuit echnology. culptured lexible ircuits have built-in terminations that eliminate the failures associated with crimped or solder-on contacts. hey plug into a printed circuit board and create a self-locking terminal pad which eliminates the need for an additional interconnect to the. hey are designed to meet specific lengths, current carrying capacities and to fit the precise geometric shape of the connector to board package. or more information see brochure. I WI I O mphenol provides cylindrical connectors with tail contacts for solder mounting on printed circuit boards. hey available in I eries I, II and III as well as other mil-spec and proprietary cylindricals. hese connectors incorporate contacts in sizes 6, 20 and 22. ost popularly used arrangements are shown with pin-out dimensional layouts in mphenol catalog 2-70, ylindrical onnectors for pplication. 54 or more information on these products visit website:

57 J/J specials - ground plane connectors and shielded contacts mphenol offers I eries I and II* connectors for data bus, and coax/triax/twinax transmission lines with conductive inserts that ground the outer conductor of the coax, triax or twinax contact to the shell. hese connectors are sold less contacts. hey will accommodate size 8 coax, triax or twinax contacts or size 2 and 6 coax contacts. he insert availability chart on pages 4-6 indicate the patterns that are available in a ground plane version, (see those designated with a star symbol), and consult how to order page for ordering procedure. OO WI OX O or shielded wire applications, coaxial contacts can be incorporated into I connectors. esigned-in crimp or solder types are available to fit various and special cables. igh performance coaxial contacts eliminate discontinuities or impedance variations due to movement of parts under axial load. or further information on coax contacts ask for catalog OO WI OI WIX O he size 8 concentric twinax contact was developed for use in I--553 irborne multiplex data bus applications which require high performance interconnect characteristics in multi-pin connectors. Ideal for this application need is the high performance ri-tart connector with its fully scoop-proof feature of recessed pins. (ee mphenol catalog 2-092) he concentric twinax contact is crimp terminable to twisted-shielded cable. Other features include: rovides protection from magnetic and electrostatic interference including nuclear electromagnetic pulse aintains shield integrity through a multi-pin cylindrical connector and does not require contact polarization within the insert 75 rated and meets performance levels of I eries III connectors vailable in size 8 and 2 contacts I--7/ cable termination Qualified to 39029/90 & /9 Integral part of the I--760 interconnection system or further information on concentric twinax contacts, consult catalog round lane onnector with etallic Insert, ower ontacts and hielded winax ontacts ize 8 oncentric winax ontacts Qualified to 39029/90 and /9 (lso available in ize 2) OO WI U OO WIX () O he (educed omponent winax) contact meets I /90 and /9 requirements for intermateability and performance while reducing the number of user-assembled components from seven to three. he inner conductors and outer barrel of the are each terminated to the cable by a crimp joint, so no costly assembly soldering operations are required. eatures include: hree user assembled components vailable in size 8 and size 0 contacts I--7/ cable termination or installation in I eries III connectors ermination completed in only two crimping operations Inner conductors stripped to common length, eliminating multiple measurements or further information on contacts, consult catalog ize 8 (educed omponent winax) ontact (lso available in ize 0) *I eries III supersedes I eries III