FEBRUARY. 584 HT From 01/02 to 28/02 SPECIAL LAUNCH OFFER TECHNICAL TOOLS - INJECTOR OM 5085 INERTIAL EXTRACTION KIT BOSCH/DELPHI/DENSO/SIEMENS
|
|
- Darren Wells
- 5 years ago
- Views:
Transcription
1 Tools and Men... OM 5085 INERTIAL EXTRACTION KIT BOSCH/DELPHI/DENSO/SIEMENS Allows inertial injector extraction in three different ways: with the aid of pliers, a Bosch adapter or an extraction lever. Without uninstalling the body of the injector or the electronic connection section, the injector can be reused if it is still functioning well. Adaptable inertia hammer on an inertial extraction cardan for increased efficiency on injectors which are difficult to access. 584 HT Regular price 649 No disassembly of the injector required, can be reused SA5080: 1340g slide hammer SA5081: Ø15mm inertial extraction rod SA5082: inertial injector extraction adapter Bosch 29-30mm SA5083: Ø15mm inertial extraction cardan OM5083: female injector extraction lever M12x1.5 OM5084: male injector extraction lever M12x1.00 OM9242: VW injector extraction adapter
2 OM 5080 INERTIAL INJECTOR EXTRACTION KIT BOSCH 29-30mm 296 Regular price 329 Allows 29 and 30mm Bosch injectors to be extracted without dismantling the electrical connection section. The injector may be reused if it is in good working condition. No disassembly of the injector required; can be reused SA5080: 1340g slide hammer SA5081: Ø15mm inertial extraction rod SA5082: inertial injector extraction adapter Bosch 29-30mm Options: SA5083: Ø15mm inertial extraction cardan OM5083: female injector extraction lever M12x1.5 OM5084: male injector extraction lever M12x1.00 OM9242: VW injector extraction adapter
3 OM 5081 SLIDE HAMMER AND INJECTOR EXTRACTION LEVER KIT Allows injectors to be extracted without dismantling the electrical connection section. The injector may be reused if it is in good working condition. Adaptable inertia hammer fitted to a cardan for increased efficiency on injectors which are difficult to access with extraction levers to release by rotation. SA5080: 1340g slide hammer SA5083: Ø15mm inertial extraction cardan OM5083: female injector extraction lever M12x1.5 OM5084: male injector extraction lever M12x1.00 No disassembly of the injector required; can be reused 251 Regular price 279 Options: SA5081: Ø15mm inertial extraction rod SA5082: inertial injector extraction adapter Bosch 29-30mm OM9242: VW injector extraction adapter
4 391 Regular price 435 OM 5082 INERTIAL INJECTOR EXTRACTION KIT BOSCH/DELPHI/DENSO/SIEMENS Applications: Bosch, Delphi, Denso and Siemens (fitted to VW essentially) SA5080: 1340g slide hammer SA5081: Ø15mm inertial extraction rod OM9242: VW injector extraction adapter Option: SA5082: inertial injector extraction adapter Bosch 29-30mm SA5083: Ø15mm inertial extraction cardan OM5083: female injector extraction lever M12x1.5 OM5084: male injector extraction lever M12x1.00 No disassembly of the injector required; can be reused OM 5083 INJECTOR EXTRACTION LEVER M12x1.5 FEMALE For OM 5081/OM 5085 Allows the injector to be unblocked. Screws onto the connector to the fuel supply line. No injector disassembly required, can be reused if still functional. For Bosch / Delphi / Denso / Siemens injectors 35 Regular price 38
5 OM 5084 INJECTOR EXTRACTION LEVER M12x1.00 MALE For OM 5081/OM 5085 For Bosch / Delphi / Denso / Siemens injectors Allows the injector to be unblocked. Screws onto the connector to the fuel supply line. No injector disassembly required, can be reused if still functional. 35 Regular price 38 OC 0708 FILM REMOVAL KIT FOR TINTED PANES Allows tinted films to be removed from glass panes on vehicles. 134 Regular price 149 HT* OE6047: Hot hair gun C OC0407: Glue remover spray OC0307BL: Plastic scrapper OC5497: Pack of 100 scrapper blades BODY REPAIR - WINDSCREEN Supplied in a case
6 JANUARY Check out our previous news on our website OM TIMING TOOLS BMW DIESEL+ENGINE FLYWHEEL LOCK D PREVIOUS S OM PINS REAR HUB SOCKET FORD TRANSIT HU HU JOINTS & TAP M13X1.25 +JOINTS+TAP M13X1.50 HU JOINTS+TAP M15X1.5 HU JOINTS+TAP M17X1.5 HU HU JOINTS+TAP M20x1.5 +JOINTS+TAP M22x1.5 OM FLYWHEEL LOCKING TOOL BMW D
7 Check out our previous news on our website DECEMBER OP 6900 SCREW SUPERCHARGER 20CV EQUIPPED WITH DRYER+500l RESERVOIR 10bar 46 OM 0368 MINI COOPER ENGINE FLYWHEEL EXTRACTOR 198 OE 0332 PACK OF PERSONAL ELECTRICAL PROTECTION EQUIPMENT 729 OE 0350 HYBRID AND ELECTRIC VEHICLES SECURITY KIT+PPE 1000V EG 0012 MARKING/WORK AREA SIGNALING PACK 25 PREVIOUS S 500
8 NOVEMBER Check out our previous news on our website OM REAR PARKING SENSOR PUNCH TOOL KIT Ø17-Ø22mm PREVIOUS S OCTOBER OM HUB INTERNAL THREAD SET (4 PCS) HU ADBLUE DISTRIBUTION SYSTEM HU ADBLUE DISTRIBUTION KIT FOR BARRELS
PSA DV6 / Ford DLD-416 Injector sleeve tool/ kit
Work Instructions PSA DV6 / Ford DLD-416 Injector sleeve tool/ kit 60385420 Ford Focus II (DA_, DAW_, C-MAX), Fiesta V/ Fusion (JH_, JD_JU), 1.6 Duratorq-TDCi (66kW) HHDA, HHDB, HHJA, HHJB Focus II (DA_,
More informationDISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON-RAIL INJECTORS STANDARD EQUIPMENT
COMMON-RAIL INJECTORS STANDARD EQUIPMENT This equipment can be used on Ditex as well as an any suitable work bench in completion of our Test Systems STANDARD EQUIPMENT DX75165 DX75165 Giuditta Press Basis
More informationCOMMON-RAIL INJECTORS DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING
COMMON-RAIL INJECTORS RECONDITIONING/CALIBRATING This equipment can be used in completion of our test systems Made by DITEX TECHNOLOGIES S.R.L. Copyrights reserved. This brochure can be neither partly
More informationJTC-1115 BMW BUSH REMOVER / INSTALLER
JTC-1011 CRANKSHAFT PULLY HOLDER For removal and replacement of the crankshaft bolt, M112 and M113, as found on E320, E430, etc. Applicable: BENZ M112, M113, M137, M155, M156, M275, and M288. JTC-1115
More informationHydraulic Injector Puller
18580000 Hydraulic Injector Puller The Sykes-Pickavant 18580000 Hydraulic Injector Puller kit is designed to provide controlled force to aid removal of seized fuel injectors on modern diesel engines, where
More informationClutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly
Copyright GEDORE Automotive GmbH, Germany (465) -01 KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.) Suitable for Self-Adjusting Clutches (with 6 and 8 bolt holes); e.g. on VW-Audi,
More informationEASY TO READ AND MANY MORE SO EASY TO USE WORKS ON ALL TYPES OF GLOW PLUGS OF ANY VOLTAGE
MULTIVOLTAGE GLOW PLUG TESTER Ref.: HU35004 the ultimate tool to test glow plugs universal: works on all type of voltage available on the market shrouded high quality interchangeable leads which plug into
More informationPULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24
PULLERS INTERNAL EXTRACTORS Precision internal extractor Slide hammer Suitable for small ball bearings Ideal for limited access areas Centering shaft For the accurate fitting of bearings and bushes 660.0501
More informationUsing a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39.
Servicing the Tool Rotary Valve Dismantling Using a mm pin punch (079000058) drive Trigger Pin 0 out and remove Trigger Assembly 39. Disconnect Hose Assembly 35 and remove Nut 3. Seperate Head Assembly
More informationTOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944
TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:
More informationHubs & Bearings. Sets for hubs and bearings. Sets for hubs and bearings. Sets for hubs and bearings. Set of 7 spacers for hubs and bearings removal.
Hubs & Bearings Set of 7 spacers for hubs and bearings removal. Renault Peugeot :106, 205 Fiat Alfa Lancia VW: Golf Opel: Corsa, Astra Citroën Ford: Mondeo, Escort, Fiesta Off-Road. Set for hubs and bearings
More informationSteel clamps with sliding plug. Code Desc. Opening mm
Rapid clamps Rapid clamp. Handle with rubber, non-slip and ergonomic. Bar steel which allows maximum pressures and reduces the danger of buckle and twist. New locking system that increases the capacity
More informationDisassembly. 1 Pull off the QUIK-LOK cable from the machine.
Special Tools Require Important! Torx TX0 bit 0 0 Screwdriver Torx 0 0 0 Forcing Discs 0 Before beginning the maintenance work, perform an initial check with a high voltage test according to VDE (see chapter
More informationWELZH. VALID TO 31ST AUGUST WERKZEUG
WELZH. VALID TO 31ST AUGUST WERKZEUG 1 Hub Mate Supporting Adaptor 3200-ww 80.00 RRP Must have item for any garage! Designed for supporting Control Arms. The HUB MATE SUPPORTING ADAPTOR is used in conjunction
More informationMighty Seven Pneumatic Air Tools and Accessories 2018 New Tools Complete Air Tool Solutions
Mighty Seven Pneumatic Tools and Accessories 2018 New Tools Complete Tool Solutions NC 4612B 1/2 Dr. Impact Wrench Square Drive Bolt Capacity Max. Torque Pressure Net Weight Hose Overall Length 1/2 5/8
More informationИнструмент для насосов Common Rail
Инструмент для насосов Common Rail AZ0045-00 FALSE ACTUATORS KIT FOR CR PUMPS Similar Delphi YDT410 AZ0134-278 DIAGNOSTIC TOOL KIT FOR CR PUMPS The tester checks the pressure of the common rail pumps directly
More informationENGINE - GLOW PLUGS. Innovation is our mission!
ENGINE - GLOW PLUGS Innovation is our mission! 1 PAGE 2 3 GLOW PLUG CONNECTOR PLIERS 268 4 5 STANDARD NUT SOCKETS FOR GLOW PLUGS 268-269 6 7 GLOW PLUG SCREWING AID 269 8 TORQUE TOOLS 270 RATCHET RING SPANNER
More informationCommon Rail System Tester CRS-5000
Common Rail System Tester CRS-5000 Catalog Injectronix Co., Ltd. 1/13 CRS-5000 is able to test the following common rail pumps and injectors Pumps Injectors Bosch CP1 Bosch CP2 BOSCH Truck BOSCH Automotive
More information201 / suitable for VAG models - 1 step drill - 1 drill guide with guide - 1 tap - 1 Wrench - 10 threaded inserts
201 /201 - suitable for VAG models - 1 step drill - 1 drill guide with guide - 1 tap - 1 Wrench - 10 threaded inserts - suitable for - metric bubble flaring (5/32''), 6 mm, 8 mm, 10 mm - 45 degree double
More informationAbout US. Tel:
About US ZQYM History& Products ZQYM718 More details Dimension for the 718A test bench Packing List of ZQYM718 AIO main part Packing(appearance) Length(cm) 218 230 Width(cm) 78 90 Height(cm) 140 155
More informationCONNECTOR INFORMATION
CONNECTOR INFORMATION SERVICE TOOLS Description Part Number Page CRIMPING TOOL (HEAVY GAUGE WIRE)... 529 035 730... 10 ECM ADAPTER TOOL... 529 036 166... 4 ECM TERMINAL REMOVER 2.25... 529 036 175... 4
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description GA5020C/GA6020C, GA5021C/GA6021C Angle Grinders 125mm (5") /150mm (6") L PRODUCT P 1/10 CONCEPT AND MAIN APPLICATIONS These four models have been developed as
More informationCommon Rail System Tester CRS-4000
Common Rail System Tester CRS-4000 A Typical Package Injectronix Co., Ltd. 1/13 CRS-4000 is able to test the following common rail pumps and injectors Pumps Injectors Bosch CP1 Bosch CP2 BOSCH Truck BOSCH
More informationUniversal Injector Removal Tool Kit
Manual Universal Injector Removal Tool Kit for Bosch, Siemens, Denso and Delphi CR injectors 60384435 / 60384535 SAFETY NOTICE To understand the functioning of the tools, is it necessary to read the manual
More informationSW9TM SW14.5TI SW15TE
SW9TM SW14.5TI SW15TE FLANGE SPREADING WEDGES hydratight.com INDEX SECTION CONTENTS PAGE NO. 1 INTRODUCTION 1 2 SAFETY INFORMATION 2-3 3 TECHNICAL DATA 4 4 HOW THE WORK 4 5 EXAMINATION, MAINTENANCE AND
More informationDriveshaft Components
Demand the original. Driveshaft Components www.demandaam.com Demand the original. Demand the original. Only original equipment components are guaranteed to meet the same specifications as the parts they
More informationService Handbook HD /97
Service Handbook HD 1050 5.905-032 07/97 Foreword HD 1050 Foreword Indispensable prerequisites for the competent execution of service procedures are comprehensive, real-life training workshops for technical
More informationNew Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054
Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295
More informationAXLE. Innovation is our mission!
AXLE Innovation is our mission! 1 PAGE WHEEL BEARING SYSTEM PP I 518 HYDRAULIC SYSTEM PP II 518-520 ADAPTER 520 UNIVERSAL SPINDLE DRIVE 520 WHEEL BEARING ASSEMBLY SYSTEM PP II 521 WHEEL HUB DISASSEMBLY
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More informationAbout US. Tel:
About US ZQYM History& Products ZQYM418 More details Packing List of ZQYM418 All-in-one body Packing Length(cm) 128 135 Width(cm) 68 75 Height(cm) 158 165 Net Weight(kg) 480 500 Part number Name picture
More information3.2 DRIVE TORQUE HUB. Roll, Leak and Brake Testing SECTION 3 - CHASSIS & TURNTABLE. 3-2 JLG Lift
3.2 DRIVE TORQUE HUB Roll, Leak and Brake Testing 10 LUG PATTERN Torque-Hub units should always be roll and leak tested before disassembly and after assembly to make sure that the unit's gears, bearings
More informationSW9TM, SW14.5TI, SW15TE
SW9TM, SW14.5TI, SW15TE FLANGE SPREADING WEDGES Operator Instruction Manual info@equalizerinternational.com www.equalizerinternational.com INNOVATION IN ITS MOST FUNCTIONAL FORM INDEX SECTION CONTENTS
More informationEngine Tools Fuel System
Fuel System KL-0124-4 KL-0124-4 Pressure- and Vacuum-Pump With plastic storage case for checking of pressure and vacuum lines. Recommended from following manufacturers: VW-Audi, Porsche, Chrysler, Daihatsu,
More informationCOMMON RAIL PUMPS CONTROL OF ACTUATORS CONTROL OF THE PUMP DIRECTLY FROM THE ENGINE. AZ FALSE ACTUATORS KIT FOR CR PUMPS Similar Delphi YDT410
CONTROL OF ACTUATORS COMMON RAIL PUMPS AZ0045-00 FALSE ACTUATORS KIT FOR CR PUMPS Similar Delphi YDT410 CONTROL OF THE PUMP DIRECTLY FROM THE ENGINE AZ0038-00 WRENCH TOOL KIT TO DISMOUNT AND MOUNT ALL
More informationAUDI NDK KIT Details Sr. No. Part No. Part Description Quantity
AUDI NDK KIT Details Sr. No. Part No. Part Description Quantity 1 1561/25 SAWBLADE,63MM 1 2 1274/10 PIPE 1 3 1397 A TURBOCHARGER TESTER 1 4 1402 POWERSTEERINGTESTAPPLIANCE 1 5 1274/B COOLING SYSTEM TESTER
More informationSA1130 TECHNICAL DATA & SPECIFICATION. Ver.1. Address: s:
TECHNICAL DATA & SPECIFICATION SA1130 Ver.1 Address: 5F 429 East Building,Bagualing Industrial Square, Buagualing Rd3, Futian District,Shenzhen City, China 518029 Tel: +86 755-22200023 / 22200020 Fax:
More informationEngines. Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1
Engines Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1 6-2 (202) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 Engines Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany -
More informationF4-VB Spray Gun Plasma Spraying. Parts List PL EN 06
F-VB Spray Gun Plasma Spraying Parts List PL 0333 EN 06 Oerlikon Metco 1/2015 Oerlikon Metco Switzerland Rigackerstrasse 16 CH-5610 Wohlen +1 56 618 81 81 +1 56 618 81 00 www.oerlikon.com/metco Spare parts
More informationInjector Extraction Kit for the M9R / M9T
Work Instructions Injector Extraction Kit for the M9R / M9T 60385095 Tensile Force Limiter 60385229 page 1 of 40 page 2 of 40 Safety notice Important! Be sure to read these instructions before assembling,
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter
More informationModifying Fiat Marea Door Handles to fit a Fiat Bravo - Simple Guide
Modifying Fiat Marea Door Handles to fit a Fiat Bravo - Simple Guide First of all we need to obtain the Fiat Marea rear door handles, once obtained we can now begin to fit them to the Fiat Bravo. Below
More informationCopper Sleeve, Unit Injector, Replacement
Volvo Trucks North America Greensboro, NC USA This service bulletin replaces SB 237-46, Copper Sleeve, Unit Injector, Replacement dated 6.2007, publication no. PV776-20177417. DService Bulletin Trucks
More informationVDO Diesel IAM. Roadmap Q1/2017. VDO / IAM Public
VDO Diesel IAM Roadmap Q1/2017 Common Rail Diesel Pumps System Continental OEM Number IAM Article Number DW10TD 5WS40018 A2C20000502 5WS40018-Z DV4TD 5WS40008 A2C20000727 5WS40008-Z DW10B, DW10U 5WS40019,
More informationGearbox Servicing
Safety Precautions : Be certain to clamp or securely support the gearbox and sub-assemblies to prevent injuries to hands and feet due to inadvertent dropping or falling over. Always wear safety glasses
More informationServicing the Tool. Service Kit SERVICE KIT. For all servicing we recommend the use of the service kit (part number (S)).
Servicing the Tool Service Kit For all servicing we recommend the use of the service kit (part number 07900-04750(S)). SERVICE KIT ITEM PART Nº DESCRIPTION Nº OFF ITEM PART Nº DESCRIPTION Nº OFF 07900-00002
More informationabrera abrera COMMON RAIL PUMPS CONTROL OF ACTUATORS TOOLS FOR TIMING ON COMMON RAIL ENGINES
Tel. 93 182 70 14 - Email: comercial@diesel.es CONTROL OF ACTUATORS AZ0045-00 FALSE ACTUATORS KIT FOR CR PUMPS Similar Delphi YDT410 TOOLS FOR TIMING ON COMMON RAIL ENGINES AZ0134-278 DIAGNOSTIC TOOL KIT
More informationHIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
More informationAIR INDUCTION SYSTEM
Page 1 of 7 PART NUMBER: APPLICATION: 203.60.2505 HONKER C6 2005 07 CORVETTE AIR INDUCTION SYSTEM EXC. Z06 INSTRUCTION SHEET NUMBER: with supercharger 903.60.9852A PACKAGE CONTENTS: Air Box Cover Air Box
More informationGo-ped ESR750 / ESR750EX Rear Brake Installation Instructions
Go-ped ESR750 / ESR750EX Rear Brake Installation Instructions This kit provides all the parts you need to install a rear brake on your ESR750 or ESR750EX. It will not work on an ESR Sport, or other Go-ped
More informationVLW18TE, VLW18TI HYDRAULIC VERTICAL LIFTING WEDGES. Operator Instruction Manual INNOVATION IN ITS MOST FUNCTIONAL FORM
VLW18TE, VLW18TI HYDRAULIC VERTICAL LIFTING WEDGES Operator Instruction Manual info@equalizerinternational.com www.equalizerinternational.com INNOVATION IN ITS MOST FUNCTIONAL FORM INDEX SECTION CONTENTS
More informationINSTRUCTION MANUAL FOR ASSEMBLING/DISASSEMBLING
INSTRUCTION MANUAL FOR ASSEMBLING/DISASSEMBLING BLUE SERIES PUMPS INDEX Disassembling Blue90 pump Hydraulic section... 3 Opening the oil sump... 6 Removing the mechanical seals... 8 Removing ball bearings...
More informationCAV / LUCAS / DELPHI rotary pumps
MarbedBook20 CAV / LUCAS / DELPHI rotary pumps CAV / LUCAS / DELPHI rotary pumps Pumps equipment www.marbed.com CAV / LUCAS / DELPHI rotary pumps Pumps equipment Pump service brackets Cushioned Coupling
More informationTECHNICAL INFORMATION Model No. Description
TECHNICAL INFORMATION Model No. Description 4114, 4114S Angle Cutter 355mm (14") PRODUCT P 1 / 6 CONCEPT AND MAIN APPLICATIONS Model 4114S is the 355mm (14") version of the current 4112S 305mm (12") Angle
More information*
M210-0043 Rubber Mount Kit M140-1143 Rubber Mount Kit For R&R of the rear rubber hydraulic mount in the Lower For removing or installing the rear Control arm on Mercedes W210 rubber hydraulic mount in
More informationStanadyne Service Tools
13301 Pressure Regulator Sleeve Extractor All Pump Types 13336 5/32" Hex Screwdriver All Pump Types 13337 Small, Squeeze-to-Open Snap Ring Pliers All Pump Types 13366 Advance Test Window Assembly 13367
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FUEL PUMP SLEEVE INSTALLATION KIT 2001-2006 BMW E46 M3 Document# 19-0058 Customer Support: info@radiumauto.com 1. There are 2 common ways to relieve fuel pressure on the BMW.
More information468 - Please Chair. Table of Contents. Page 1 of xxxx Rev A
468 - Please Chair Table of Contents Page 2 Assembled 2 pieces Back & Bracket 3 Handle Kit without Headrest 4 Handle Kit with Headrest 5 Handle 6 Lower Cover Kit 7 Upholstered Seat & Screws 8 Adjustable
More informationContents c mm Ø Cerametallic & Organic Drive Plate Hub Spline Details H e l i x
Contents Part Number Legend... 2 The HELIX Racing Clutch Range... 4 Clutch Terminology... 5 Clutch Fitting & Flywheels... 6 Release Bearings... 7 Concentric Slave Cylinder Release Bearings... 8 Clutch
More informationTransmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1
Transmission Transmission Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 (449) 8-01 KL-0140-2 Meter for Coefficient of Friction PM KL-0140-2 For accurate adjustment of bearing pre-load when repairing
More information1995 Town Car/Crown Victoria/Grand Marquis
Page 1 of 23 Section 11-04: Steering Column DISASSEMBLY AND ASSEMBLY 1995 Town Car, Crown Victoria, Grand Marquis Workshop Manual Steering Column Disassembly 1. Disconnect battery ground cable (14301)
More informationRepair Manual. General Pump is a member of the Interpump Group. Ref Rev.A 09-13
Repair Manual General Pump is a member of the Interpump Group 8 INDEX 1. INTRODUCTION..................................................Page 3 2. REPAIR GUIDELINES..............................................Page
More informationBílaverkfæri. Kertalyklasett skrall 16+21mm 5stk. Vörunúmer: 106. Legu-Pullari. Legu-Pullari
Bílaverkfæri Kertalyklasett skrall 16+21mm 5stk 1 ratchet with flexible head 2 extension bars 45 + 75 mm 2 spark plug sockets 16 + 21 mm Vörunúmer: 106 Legu-Pullari drop forged chrome plated reversible
More informationInjector Removal Set SOFIM
Manual Injector Removal Set SOFIM for F1AE-2,3 l and F1CE-3,0 l 60385345 / 60385340 SOFIM 2,3l engine code: F1AE-2.3l in the: Fiat Ducato Iveco Daily (Euro 3, 4 & 5) SOFIM 3,0l engine code: F1CE-3.0l in
More informationINSTALLATION GUIDE. KTM RFS Husaberg Polaris 450/525 Outlaw KTM 450/525 XC ATV Manual Revision:
REKLUSE MOTOR SPORTS The z-start Pro Clutch INSTALLATION GUIDE KTM RFS 03-07 Husaberg Polaris 450/525 Outlaw KTM 450/525 XC ATV 191-833 Manual Revision: 010615 2002 Rekluse Motor Sports Rekluse Motor Sports,
More informationHGM-E LSHT Wheel Motor Service and Repair Manual
HGM-E LSHT Wheel Motor Service and Repair Manual BLN-52198 January 2018 Table Of Contents Foreword... 1 How to use this manual... 2 General Instructions... 2 General Description... 2 Tools... 3 Torques...
More informationJOB EXTRACTOR OPERATIONS MANUAL REV A
JOB EXTRACTOR OPERATIONS MANUAL REV A October 2002 JOB EXTRACTOR - HEAD ASSEMBLY JOB EXTRACTOR - HEAD ASSEMBLY 1 S80756 ANTI-SPLASH SWITCH, GREEN 1 2 S80484 SWITCH, ON-OFF 1 3 S81006 SCREW, (PHILLIPS)
More informationSW9TM, SW14.5TI, SW15TE
SW9TM, SW14.5TI, SW15TE FLANGE SPREADING WEDGES Operator Instruction Manual info@equalizerinternational.com www.equalizerinternational.com INNOVATION IN ITS MOST FUNCTIONAL FORM INDEX SECTION CONTENTS
More informationREPAIR SOLUTIONS FOR ENGINE. Version 6.0
REPAIR SOLUTIONS FOR ENGINE Built to succeed. Version 6.0 CONTENTS 1. COMPRESSION & CYLINDER LEAKAGE TEST 5 1.1 Compression Test Equipment 6 1.2 Cylinder Leakage Tester 8 1.3 Common Rail High Pressure
More informationMX-1408 SELF-CONTAINED EXTRACTOR REPLACEMENT PARTS LIST
MX-1408 SELF-CONTAINED EXTRACTOR REPLACEMENT PARTS LIST SECTION 100 - TANK ASSEMBLY Ref Part Description Part 2 Dome w/filter (#2 & 8) 402478 3 Complete Solution Tank Cover 423130 5 Dome w/filter & Gasket
More informationCommon-rail Power Chip. Installation Guide
Common-rail Power Chip Installation Guide Version: 10-04-2008 Important! Installation of the Common-rail power chip module is at your own risk. Furthermore, Chiptuning Direct ApS accepts no responsibility
More informationVer: 2 SPECIAL TOOLS FOR AUTO REPAIRS
Ver: 2 SPECIAL TOOLS FOR AUTO REPAIRS Company profile: Wallmek i Kungälv AB was started in 1978, producing and designing special tools for car repairs. Wallmek stands for idea and design of tools, up to
More information- includes following tools:
- 4 ball bearing loaded, smooth running drawers, 100 % extendable and 1 storage compartment - heavy duty ball bearing castors, thereof 2 castors lockable - drawers and storage compartment separately lockable
More informationASSEMBLY INSTRUCTIONS GT MIXED 150/280 SEALED CONNECTION SYSTEM
ASSEMBLY INSTRUCTIONS GT MIXED 150/280 SEALED CONNECTION SYSTEM NOTE: PLEASE CONTACT YOUR DELPHI SALES REPRESENTATIVE WITH ANY QUESTIONS OR COMMENTS CONCERNING THESE ASSEMBLY INSTRUCTIONS. COMPONENT P/N
More informationENGINE SERVICE $ $ $ $ $ $9. 83 $ $9. 15 $ $ SPARK TESTERS SPARK PLUG SERVICE TOOLS
SPARK TESTERS TEX-458 Coil-On Plug Spark Tester $34. 59 TEX-404 Adjustable Ignition Spark Tester from 0 to 40,000 Volts Works on ignition systems from high energy electronic automotive systems to small
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publication No. After 13 TRX420 All MII 15067 KIT (except 14 TRX420FA/FPA) Issue Date P/N 08T71-HR3-A20 After 13 TRX500 All (except 14 TRX500FA/FPA) September
More informationTools for General Repairs
0-0 Magnetic Lifter (flexible) KL-026-2 KL-026-204 KL-026-203 KL-026-202 Magnetic Tools (Telescopic Design) KL-026-20 KL-026-206 KL-026-22 Magnetic Lifter KL-026-2 Magnetic Lifter with flexible Shaft The
More informationThe M7 Direct Flow Intercooler (DFIC) Installation Guide
The M7 Direct Flow Intercooler (DFIC) Installation Guide This information is meant only as a guide. The author of this information,, or any M7 Tuning employees assumes no liabilities for any outcomes resulting
More informationINSTALLATION GUIDE Manual Revision:
REKLUSE MOTOR SPORTS The z-start Pro Clutch INSTALLATION GUIDE KTM 125, 144, 200 2-Stroke KTM 250, 300 2-Stroke KTM 250 SXF, XC, XC-W KTM 400 XC-W KTM 450, 505 SXF, XC-F KTM 450, 530 XCR-W, EXC-R Husaberg
More informationMANUFACTURER Explorer Sport ENGINE DISPLACEMENT NUMBER OF VALVES FIRING ORDER VEHICLE CATEGORIES TRANSMISSION
MANUFACTURER Ford TYPE Explorer Sport ENGINE DISPLACEMENT 3500cc NUMBER OF VALVES 24v ENGINE CODE / NUMBER 3.5L GTDi Ecoboost FIRING ORDER 1 4 2 5-3 - 6 VEHICLE CATEGORIES M TRANSMISSION AT VERSION AFC-2.1
More informationGlow plugs. Glow plug removal kit. Glow plug removal kit. Blowing tool - BOSCH. Complete set for removing glow plugs. Mercedes.
Glow plugs Mercedes CDI 311 031 000 The components supplied are the same as the ones included in code 311031000 plus: - M8x1 threaded male - Double diameters bit Ø 7 - Ø 5,5 mm. Mercedes CDI 311 031 017
More informationSIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
More informationSelf-propelled Chipper Shredder Vacuum
2.11. Confirm that the drive gears are installed on the correct side. See Figure 2.11. 3. TRANSMISSION REMOVAL 3.1. Disconnect the H.T. lead from the spark plug. 3.2. Remove collection bag or blower chute.
More informationSteering Column. Disassembly. 1. Remove instrument panel cover and reinforcement from vehicle as described in this section.
Page 1 of 14 Section 11-04A: Steering Column, Ranger 1997 Aerostar/Ranger Workshop Manual DISASSEMBLY AND ASSEMBLY Procedure revision date: 05/17/2000 Steering Column Disassembly 1. Remove instrument panel
More informationTITAN V3: assembly and calibration manual
TITAN V3: assembly and calibration manual Please read quickstart guide included in the kit before starting installation process. Please note that this is beta version of manual. The full version of manual
More informationAutomatic SingleLine Greasing System
Parts Manual Automatic SingleLine Greasing System YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationThis kit can not improve any gear selection condition related to worn or damaged synchromesh components.
WEVO GateShift kit This kit includes all the parts required to install the WEVO GateShift kit. The kit will improve accuracy of gear selection and protect the internals of a 915 transmission from the extraneous
More informationSpherical MQB Rear Trailing Arm Kit, MkVII Volkswagen Golf/GTI/R & 8V/8S Audi A3/S3 & TT/TTS
Spherical MQB Rear Trailing Arm Kit, MkVII Volkswagen Golf/GTI/R & 8V/8S Audi A3/S3 & TT/TTS Supplied Parts: 034Motorsport Spherical MQB Rear Trailing Arm Upgrade (Driver Side) 034Motorsport Spherical
More informationBody and Interior Tools
9-01 KL-0145-90 KL-0145-90 Hydraulic Alignment Set 10 t. The Hydraulic Press Set KL-0145-90 allows Pressing and Spreading functions. Contents: Contents 3 4 1 2 5 6 8 Part No. Description Qty. 1 Hydraulic
More informationAutomatic SingleLine Greasing System
Parts Manual Automatic SingleLine Greasing System D000144R04 YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying,
More informationPNEUMATIC TOOLS GD_PG_$KT-K10-$KP-DRUCKLUFT-$PG :43:43
PNEUMATIC TOOLS 12 PNEUMATIC TOOLS 1 2 3 page 716-729 4 5 6 page 729-733 7 8 9 10 11 12 13 14 15 16 17 i PNEUMATIC Composition Cold insolation handle Adjusting screw for air supply adjusts speed and performance
More informationTable of contents. Tools by System: Index of tools by Part Number:...P 21. No Year All. Model All
Date : December 9 2008 Subject : Service Tools No 2009-1 Year All Model All BRP is proud to introduce its latest Service Tools Bulletin. These special tools were designed to help you efficiently service
More informationTECHNICAL INFORMATION Model No. Description
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2450, HR2451, HR2452 24mm (15/16 " ) Rotary Hammer The above models are the advanced version of MAKITA's famous
More informationBody and Interior Tools
-01 KL-0145-0 KL-0145-0 Hydraulic Alignment Set 10 t. The Hydraulic Press Set KL-0145-0 allows Pressing and Spreading functions. Contents: Specification: 3 4 1 2 5 6 7 8 Part No. Description Qty. 1 Hydraulic
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description HR3200C, HR3210C, HR3210FCT Rotary Hammer 32mm (1-1/4") CONCEPT AND MAIN APPLICATIONS HR3200C series models have been developed as successor models of HR3000C,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 2351 2 DROP SPINDLE 2WD ONLY >>> CANNOT USE STOCK WHEELS you MUST use 20 wheels or larger see instructions on pg. 3
More informationElectric Rate Action Proposal. February 2017
Electric Rate Action Proposal February 2017 Huntsville Utilities Rate History (2000 present) October 2002 5.5% to all rate classes impacting availability and demand/energy charges Residential availability
More informationROPE DANCER INSTRUCTION MANUAL:
Educational Design Robot ROPE DANCER INSTRUCTION MANUAL: Model WTR-RD1 2010 AREXX - THE NETHERLANDS CONTENT 1. Product information Rope Dancer 3 2. General assembly information 4 2.1 Parts list Rope Dancer
More information