Tools for General Repairs

Size: px
Start display at page:

Download "Tools for General Repairs"

Transcription

1 0-0

2 Magnetic Lifter (flexible) KL KL KL KL Magnetic Tools (Telescopic Design) KL KL KL Magnetic Lifter KL Magnetic Lifter with flexible Shaft The lifting magnet is located within an anti-magnetic sleeve This allows the tool to be positioned accurately before the magnet comes into operation The magnet is triggered by pressing the handle which slides back the protective anti-magnetic sleeve KL Magnetic Lifter flexible (Alu) With flexible shaft, which will remain in desired position KL Magnetic Lifter flexible With flexible shaft - does not hold its position KL Magnetic Lifter flexible - extra strong With flexible shaft, which will remain in desired position Technical Data Part No Lift effort [g] Head-Ø [mm] Length [mm] Wgt [g] KL KL KL KL Magnetic Lifter Telescopic Design KL KL KL KL KL Part No Description Liftpower [g] Head-Ø [mm] Length [mm] Wgt [g] KL With scriber 300, KL Strong KL Extra strong Liftpower KL With light KL With light and mirror KL Claw Pickup Tool For retrieving small parts like nuts, bolts, washers, etc from very inaccessible places Length600 mm KL Flexible Lamp This flexible Lamp allows inaccessible places to be readily illuminated The flexible shaft, on the end of which is the Lamp with a detachable magnetic head, retains all adjustments and bends Two volt Mignon-Batteries are required, which are not included Total Length 430 mm Weight (without Batteries) 20 g Spare Parts KL Replacement Light Assembly Set (consists of bulbs and magnetic head) KL Telescopic Mirror Allows hard to reach places to be easily seen Used in engine inspection etc (360 rotatable) Length 320 / 20 mm Note Furher Telescopic Mirrors see Page 0-36 KL KL magnetizing KL Magnetic Valve Key Lifter With this flexible Mini-Magnetic Lifter metallic objects may be removed from the smallest crack Magnetic Lifter KL is particularly suitable for removal of valve-stem collets Technical Data Length00 mm Weight 6 g Lifting Force-Ø 3 mm Magnet 0 g Lifting Force-Ø 4 mm Magnet 20 g KL Magnetizing and Demagnetizing-Block demagnetizing To magnetize and demagnetize tools Size mm Weight g 0-02

3 KL KL KL Magnetic Screw Holder Set To slide over Screwdrivers, Allen Keys, Torx -Sockets, Ribe-Sockets, Multi-Spline Sockets, etc The Set consists of 4 various sizes of O-rings in which are magnetic inserts The Magnetic Screw Holder prevents the screw falling off, and allows one-handed operation Simplifies extraction and replacement of fixings in hard-to-reach places Technical Data Magnetic Screw Holder For Allen keys For Torx For Multi-Spline XZN Size 3, 4 mm T, T20, T2 Size 2 mm T2, T30 M, M6 Size 3 6, mm T40, T4 M8 Size 4 8, mm T0 M0 Weight, Set 6 g KL Tweezer Set KL KL piece tweezer set - universal application Description Length Qty Extra slim, fine tips 2 mm Extra fine tips mm Extra long, rounded tips, self-locking 0 mm Fine tips; 40 angled 4 mm Fine tips; self-locking 20 mm Special tips for instrument bulbs mm Weight 40 g KL Scribe Ideal for Marking Most Metal and Softer Material Surfaces Comes with straight and 0º points to mark in even the tightest places Weight 28 g KL Mini Hook and Pick Set Designed to ease the removal of O rings, cotter pins, seals and bushes in various automotive applications Blades stainless steel hardened and tempered with impact resistant handles KL-03-0 KL-03-0 Pry Bar Set Set consists of four hard wearing pry bars applicable for a number of different jobs eg Dismantling stubborn components Positioning components Holder components in required position Expanding of Bore Holes KL-03- consists of Length Pry Width 24 (60 mm) 20 mm 8 (460 mm) 20 mm 2 (30 mm) 6 mm 8 (200 mm) 0 mm KL-03- Pry Bar Set 2 2 These Pry Bars are manufactured from special steel and are particularly suitable for Dismantling stubborn components Positioning components Holding components in required position Spreading clamp-fixtures, etc Technical Data Length Pry Width / 2 Weight 30 mm 24 / 33 mm 600 g 00 mm 24 / 33 mm 00 g 0-03

4 KL-03- KL KL KL-40-0 KL-03- Mounting Lever With chromed Blade Special profile ideal for Bodywork and Inner Door Trim Length 2 mm Pry Width 26 mm KL Arm Protector Protects Arm from Burns While Working Around the Engine Made of durable, heat-resistant Kevlar Double wall construction for added heat protection Weight g KL Magnetic Tray Stainless Steel Tray with extra strong rubber-protected magnetic feet Size 240 mm x 40 mm KL-40-0 Combi-Shears High performance Blades of stainless steel for perfect cuts along the whole length of the blade One serrated blade for cable-cutting Comfortable impact-resistant plastic handles with sprung selfopening action Blade Length 40 mm Overall Length 80 mm KL Bow Saw (0 mm) KL KL-040- KL Very compact, with ergonomic Handle for delicate work in confined spaces For Wood, Plastic or Metal Blade Length 0 mm Overall Length 20 mm Spare Part KL Replacement Blade Pack (0 pieces) KL-040- Torx Bit and Socket Identifier Help Select the Right Torx Bit or Socket A complete set of Torx gauges will correctly identify the exact size of a Torx nut, bolt or screw Set identifies Torx bit sizes T through T-80, Torx socket sizes E- through E-32, and tamper-proof Torx bit sizes T- through T-80 = reg trademark of Camcar-Textron Inc USA KL Hand Impact Tool For quick and easy loosening of stubborn or corroded Nuts, Bolts and Screws The set contains a Hand Impact Tool with ½ square drive, ½ Bit Holder, 4 Phillips Inserts and Slot-Head Insert, contained in a Plastic Storage Case Existing impact sockets may be used when mounted onto the ½ Square Drive Weight,3 kg 0-04

5 KL-08-0 K KL-08- KL-08-6 KL KL-080- KL Stop Threaded stud inserting tool KL-08-3 KL Universal Threaded stud KL-08-0 K Threaded stud inserting tool set in plastic case Applicable for M6, M8, M0, M2, M8x and M0x threaded studs For clean, rapid insertion of threaded studs, for instance during engine repairs consists of Part No Description Qty KL Threaded stud inserting tool M6 KL Threaded stud inserting tool M8 KL Threaded stud inserting tool M0 KL Threaded stud inserting tool M2 KL Threaded stud inserting tool M8x KL-08-0 Threaded stud inserting tool M0x KL Plastic case with foamed material liner Technical Data Weight 20 g Drive /2" Length 2 mm Measure plastic case 2 x 230 x 83 mm KL-08- Stud Tool Universal tool for studs with diameter 6-2 mm Suitable even for broken screws when the rest length is at least mm Advantages Infinitely adjustable Operates in the most confined space Ideal also for bolts with rusted or stripped threads KL-08-6 Stud Tool Set For removal and replacement of threaded studs (left or right hand studs) Weight, kg Outer Drive Hex 2 mm Inner Drive½" KL-08-6 Stud Tool Set consists of Part No Description Part No Description KL-08- for Ø 6 mm KL-08-4 for Ø 0 mm KL-08-2 for Ø mm KL-08- for Ø 2 mm KL-08-3 for Ø 8 mm KL Plastic Case KL Super Out Set A super strong extractor set made of a special hardened, shockresistant tool steel Works on both left and right hand threads Super Outs cut their way STRAIGHT into bolts, eliminating wedging or further tightening of frozen bolts and screws Five extractor sizes fit in screw- Ø from 6 to 3 mm Length38 mm Weight, Set 42 g KL-080- Hydraulic Nut Splitter To remove badly rusted and stubborn nuts The thread will remain undamaged For nuts with quality class, 6, 8 and 0 The hydraulic nut splitter KL-080- can be used for nuts up to 4 mm AF Frame Micrometers With ratchet and clamping-ring, enclosed thread, spindle hardened and adjustable, with hand guard insulating pads, reading parts chrome plated, with check-gauge Description Chrome-plated Note The Frame Micrometers KL and KL are delivered in storage boxes KL Frame Micrometer Range 0-2 mm Pitch ½ mm Weight 30 g KL Frame Micrometer Range 2-0 mm Pitch ½ mm Weight 00 g 0-0

6 KL-028- KL KL KL-028- Dial Indicator Ø 8 mm Description Stem and spindle stainless steel, accuracy to DIN 88-A Reading 0,0 mm Measuring Range 0 mm Housing -Ø 8 mm Set nut revolution by 360 mm Stem -Ø 8 h 6 KL Dial Indicator Ø 40 mm Description Stem and spindle stainless steel, accuracy to DIN 88-E The dial indicator is additionally equipped with an extension of 0cm (KL ) Reading 0,0 mm Measuring Range mm Housing -Ø 40 mm Set nut revolution by 360 0, mm Stem -Ø 8 h 6 KL KL KL Extension Set For Dial Indicators KL & KL-028- Each extension with diameter 4 mm The set consist of extensions KL to KL Part No Length Part No Length Part No Length KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm AccessoryKL KL mm KL mm Flat Measuring Pin KL Flat Measuring Pin As an accessory for the shown Dial Indicators KL-028- (Ø8 mm) or KL (Ø40 mm) KL KL Precision-Inside-Measuring-Tools Dial gauge for measuring of cylindrical bores, especially for petrol and diesel engines Includes dial-gauge and wooden case Measuring range Ø 0-8 mm Measuring depth 80 mm KL Dial Gauge with Stands Consists of KL-028- and KL Strong rods of tool-steel, with fine adjustment for dial-gauge-clamp, prismatic magnetic base Inclusive Dial Indicator Ø 8 mm and Wooden Case To measure the distortion of the brake disc For adjusting the engine and transmission KL KL KL Note The Slide Calipers KL and KL are delivered in storage boxes KL Dial Gauge Stands (not illustrated) As KL-028-3, but without Dial Gauge indicator KL Slide Caliper Open slide, hardened, with cross-points and depth gauge Description stainless steel Range 00 mm Jaw Length 2 mm Vernier /20 mm Weight 80 g KL Slide Caliper Open slide, hardened, with locking screw and adjustable dial-face Description stainless steel Range 0 mm Jaw Length 40 mm Reading 0,0 mm Weight 220 g KL Slide Caliper digital Supplied with the proved, capitative sensor-technic, with digital-lcddisplay Mechanical parts produced of stainless, hardened steel, in best precision Range 0 mm Jaw Length 40 mm Reading 0,0 mm Weight 30 g 0-06

7 KL KL Slide Caliper for Brake Drum Measuring-surfaces stainless steel, rule and slide produced of aluminium-profile, open slide, fixing-screw, vernier parallax free reading Range 00 mm Jaw Length 20mm Vernier /20 mm + /28" Weight 200g KL Slide Caliper for Brake Disc KL To measure the thickness of installed brake-discs The tool is hardened and contains a locking screw Designstainless-steel Range 0 mm Vernier /0 mm Jaw Length mm Weight 0 g KL Slide Caliper for Brake Disc KL To measure the thickness of installed brake-discs The tool is hardened and contains a locking screw Design Stainless-steel Range 00 mm Vernier /0 mm Jaw Length 20 mm Weight 240 g KL Tyre Tread Depth Gauge Strong brass construction Range 30 mm Vernier 0 g Legible accuracy 0, mm KL KL Screw Pitch Gauges For outside- and inside-measurements, screwed in steel case Threads metr & inch KL Feeler Gauge (20 Blade) KL Range 0,0-,00 mm in 0,0 mm increments Blade-Length 00 mm Weight 00 g KL-040- Feeler Gauge ( Blade) KL KL KL-040- Range 0,0; 0,; 0,20; 0,2; 0,30; 0,40; 0,0 mm Blade-Length mm Weight g KL Precision-Hair-Edges 00 mm Hair-edges hardened, ground, lapped, with heat-insulated handle For fitting Cylinder Heads up to 4 Cylinders Designstainless steel Section 40 mm Length 00 mm Weight 60 g KL Precision-Hair-Edges 600 mm As KL but for fitting Cylinder Heads up to 6 Cylinders Length 600 mm Weight 200 g KL KL Wooden Storage Case for Precision-Hair-Edges For storing the Precision-Hair-Edges KL or KL (not illustrated) Length 62 mm Weight 400 g 0-0

8 Pliers RZB - RZB - Pliers Set (6-pcs) CODE 6832 Consists of JC Heavy duty side cutter Code-No 6440 (American Model) For hard wire Cutting edges inductively hardened, hardness approx 64 HRC Length 60 mm Length of head mm Weight 20 g Tip-Ø,6 mm JC Heavy duty combination pliers Code-No 6000 For the hardest constant use Good lever action for easy cutting Cutting edges inductively hardened, hardness approx 63 HRC, to cut all wire types including piano wire In heat-treated steel as per DIN EN 0083, mat No 003, oil-hardened Protected design Length 80 mm Length of head38, mm Weight 240 g Tip-Ø mm Consists of JC JC 800 A JC 800 J JC JC Mechanic's pliers (straight pattern without cutter) Code-No With flat-round jaws, cross-hatched gripping surfaces and needle nose, for safe work in narrow spaces Length 200 mm Weight 20 g Length of head0, mm Tip-Ø 2,8 mm 800 J 2 Circlip pliers for internal retaining rings Code-No 6030 (Straight pattern, Form C) Chrome-plated, with blue dipped handles Length 83 mm Length of head4 mm Weight 46 g Tip-Ø,8 mm Bore-Ø -60 mm 800 A 2 Circlip pliers for external retaining rings Code-No (Straight pattern, Form A) With clamping protection, chrome-plated, with red dipped handles Length 82 mm Length of head4 mm Weight 6 g Tip-Ø,8 mm Shaft-Ø -60 mm 42 0 JC Universal pliers ( settings) Code-No With safety box joint and protection against blocking With push-button single-hand adjustment for fast clamping on nuts and tubes Length 2 mm Length of head3 mm Weight 40 g The Pliers Set is delivered within a stackable, shock and oilresistant plastic storage case 8000 J 8000 J Circlip pliers for internal retaining rings angled pattern, Form D Enamelled black, with blue dipped handles For retaining rings as per DIN 42, DIN 84 GEDORE vanadium Steel 3 CrV3, mat Nr 2208 Part No Code-No Tip-Ø (mm) Bore-Ø (mm) Length of head (mm) Length (mm) 8000 J , mm 8 - mm 28 mm 2 mm 8000 J 60420,3 mm 0-2 mm 28 mm 2 mm 8000 J ,8 mm - 60 mm 4 mm 6 mm 8000 J ,3 mm mm 0 mm 24 mm 8000 J ,2 mm 8-6 mm mm 282 mm 0-08

9 Pliers 8000 A 8000 A Circlip pliers for external retaining rings angled pattern, Form B With clamping protection, enamelled black, with red dipped handles For retaining rings as per DIN 4, DIN 83 GEDORE-vanadium Steel 3 CrV3, mat No 2208 Part-No Code-No Tip-Ø (mm) Shaft-Ø (mm) Length of head (mm) Length (mm) 8000 A , mm 3-0 mm 2 mm 30 mm 8000 A 60230,3 mm 0-2 mm 2 mm 30 mm 8000 A ,8 mm - 60 mm 43 mm 0 mm 8000 A ,3 mm mm 3 mm 20 mm 8000 A ,2 mm 8-6 mm 64 mm 30 mm 800 A 800 A Circlip pliers for external retaining rings straight pattern, Form A With clamping protection, chrome-plated, with red dipped handles For retaining rings as per DIN 4, DIN 83 GEDORE-vanadium Steel 3 CrV3, mat No J Part-No Code-No Tip-Ø (mm) Shaft-Ø (mm) Length of head (mm) Length (mm) 800 A , mm 3-0 mm 40 mm 4 mm 800 A 6040,3 mm 0-2 mm 40 mm 4 mm 800 A ,8 mm - 60 mm 4 mm 82 mm 800 A ,3 mm mm 6 mm 230 mm 800 A ,2 mm 8-6 mm 8, mm 320 mm 800 J Circlip pliers for internal retaining rings straight pattern, Form C Chrome-plated, with blue dipped handles For retaining rings as per DIN 4, DIN 83 GEDORE-vanadium Steel 3 CrV3, mat No 2208 Note Pliers 8000 J for internal retaining rings (angled pattern) see Page 0-08 Special body grip wrenches 3 K Part-No Code-No Tip-Ø (mm) Bore-Ø (mm) Length of head (mm) Length (mm) 800 J , mm 8 - mm 4 mm 4 mm 800 J 6040,3 mm 0-2 mm 4 mm 4 mm 800 J ,8 mm - 60 mm 4 mm 83 mm 800 J ,3 mm mm 68 mm 230 mm 800 J ,2 mm 8-6 mm mm 302 mm Special body grip wrenches 3 K2 3 K3 3 K Special body grip wrench With adjusting screw and dip-insulated release lever (blue) 3 K2 Special body grip wrench With adjusting screw and dip-insulated release lever (blue) Special jaws with domed clamping surfaces, 2 x 20 mm at top, x mm at bottom 3 K3 Special body grip wrench With adjusting screw and dip-insulated release lever (blue) Special jaws with flat clamping surfaces, 40 x 4 mm at top, 40 x 3 mm at bottom Note Further Pliers and Tools see GEDORE Catalog 0-0

10 Pliers KL-02- KL-02- Circlip Pliers Ø mm 4 angled Tips make these Pliers ideal for inner-rings when repairing Gearboxes Tip-Ø2,3 mm Length220 mm KL-02-6 KL-02-6 Circlip Pliers Ø 8-6 mm KL K The special form of the Tips (4 off-set) allows quick and easy removal and replacement of Inner-rings during wheel-bearing repairs Tip-Ø3,3 mm Length3 mm Outer Circlip (for Shafts) Inner Circlip (for Bores) Pliers for Special Safety Rings For Inner Circlips Unscrewed For Outer Circlips KL K Circlip Pliers Set 0-piece Set, consisting of 8 Pliers and 2 Hooks Pliers reversible for inner or outer Circlips with captive screw Pliers reversible for inner or outer Circlips Pliers straight and angled Pliers with easy-grip handles Pliers of heat-treated spring-steel light and handy Hooks straight and angled Technical Data Total weight 800 g Tip Form Tip Ø [mm] for Shaft Ø or Bore Ø [mm] Length [mm] Weight [g] straight,0 3-0 / angled,0 3-0 / straight, angled, straight,8-60 / angled,8-60 / straight 2, / angled 2, / The Set is delivered in a Plastic Storage Case KL Pliers for Special Safety Rings KL KL KL KL KL KL Part-No Application example Tip-Form Tip size [mm] KL For circlips and snap-rings hooked,, 3 in Motors, Gearboxes, long & Clutches and Brakes slim spreading eg VW-Audi 3-30 KL KL KL KL KL KL Rings in Motors, Gearboxes, Brakes, Differentials, Clutches, eg BMW, VW-Audi Large Rings on Drive Shafts in earth-movers and construction vehicles Large Rings on Drive Shafts and steering racks, eg Opel/Vauxhall, VW-Audi Deep, large Rings on Drive Shafts and Steering Shafts Large Rings on Drive Shafts and Steering Shafts eg VW-Audi Parallel to expand Rings without eyes, eg BMW, Ford, Mercedes, Opel/Vauxhall, VW-Audi hooked, wide, milled Interchange, wide, milled straight, pointed, short, milled straight, centering-rand, long, slim straight with Hold profile straight, centering-rand, slim, 8 spreading 3,4-32 3, 8 spreading 8 -,6 3,3 spreading 3, ,4 4,2 spreading , spreading 6, parallelspreading 4-2 Long [mm] Wgt [g]

11 Pliers KL-02- KL-02- Circlip Pliers straight Tips are angled to 0 The Pliers allow quick and easy removal and replacement of Outer-Rings during repairs to Motors, Transmissions, Differentials, Steering, etc Suitable for VW-Audi, Mercedes, Opel/Vauxhall KL-02-2 centralised hole Uni-Joint Drive Shaft The Problem Circlip rings KL-02-2 Circlip Pliers angled The Tips are angled at 30, and are very thin with an additional centralised hole in the face of the Tip, which guarantees safe grip on Outer Rings This is particularly important during repairs to Drive-Shafts/CV Joints, Motors and Transmissions Suitable for VW-Audi, Mercedes, Opel/Vauxhall KL-02-3 KL-02- The Problem The Circlip Universal KL-02-3 Circlip Squeezing Pliers Suitable for VW-Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel/Vauxhall, Seat, Škoda, Subaru, Suzuki, Toyota, etc To pre-tension the drive-shaft circlip during assembly of the outer constant velocity joint By holding the drive-shaft circlip with the special circlip pliers KL-02-3, the outer drive-shaft splines can be easily assembled onto the CV Joint Weight 360 g KL KL-04- KL-02- Snap Ring Pliers For brake calipers and transmission, angled 0 Length 0 mm Length of Flange 60 mm KL Brake C Clip Removal Pliers For Emergency Brake Cable Lever Removal This Pliers makes removal of the C clip, found on drum brakes, fast and easy This allows the emergency brake cable lever to be removed from the brake shoe for replacing The Pliers has cushioned handles for comfort Length 200 mm Weight 0 g KL-04-2 KL-04- Brake Spring Pliers For removal, replacement and installation of back plate retaining spring Length 2 mm Weight 240 g KL-04-2 Brake Spring Pliers With off-set jaws For riveted and bonded brake linings Length 3 mm Weight 340 g 0-

12 Pliers KL KL HGV Brake Spring Pliers Extra strong version Suitable for HGV Air or Hydraulic drum brakes For removal and replacement of brake-shoe springs Length 3 mm Weight 0 g KL-04-3 KL-04-3 Brake Cable Pliers with locking handles To remove and replace the Hand Brake Cable The Pliers compress the return springs so far that the cable may be easily removed and replaced Suitable for VW, Audi, BMW, Citroën, Nissan, Peugeot, Renault, Rover, Seat, etc Length 26 mm Weight 300 g KL-04-3 KL-04-3 Brake Cable Pliers To remove and replace the Hand Brake Cable The Pliers compress the return springs so far that the cable may be easily removed and replaced Suitable for VW, Audi, BMW, Citroën, Nissan, Peugeot, Renault, Rover, Seat, etc 2400 Length22 mm Weight g 2400 Universal pipe bending pliers CODE KL-00-0 Bends up to 0, for copper pipes DIN EN 0 and all nonferrous metal pipes as well as thin-walled precision steel pipes and brake lines from 4 to 0 mm Ø, (two turnable formers 4-60 and mm), bright nickel-plated, handles PVC coated KL-00-0 Pliers for Balance Weights KL-00- Hard rubber top eliminates any damage to metal rims KL-00- Pliers for Balance Weights Without hard rubber top KL-03-0 KL-03-0 Pliers for Protection Top Application Audi, Opel/Vauxhall, VW For the safe removal of plastic tops off of wheel bolts 0-2

13 Pliers KL-02-8 Universal KL-02-8 CV Boot Band Tool cut tension Suitable for Endless Clamp-Bands (eg Bandimax) up to, mm, for example drive-shaft gaiters, etc For quick and easy tensioning and cutting endless Clamp- Bands Length 60 mm Weight 40 g KL-02-8 Universal KL-02-8 CV Boot Clamp Pliers Works on earless-type clamps on axle collars, water and fuel hoses Universal Application Specially suitable for VW-Audi etc Weight 340 g KL-02- Citroën, Peugeot KL-02- Hose Band Pliers Suitable for Citroën, Peugeot etc For releasing and re-fitting reusable Clamp-Bands, types CLIC (Caillau/Serflex) The jaws of these pliers are specially shaped to open and close even Clamp-Bands that are difficult to reach KL-02-6 VW-Audi, Ford, Opel KL-02-6 CV Boot Band Pliers with Torque drive Suitable for VW-Audi, Ford, Opel/Vauxhall etc For assembly of new stainless steel clamp-bands on driveshafts where a torque setting is required The 44-0 /4" Torque Wrench is ideal to provide the drive KL Universal KL CV Boot Band Cutter straight To open or cut "earless Clamp-Bands on CV-Joints, Drive- Shafts, Radiator Hoses, Fuel-lines, etc Universal application Technical Data KL Length 220 mm Weight 340 g KL CV Boot Band Cutter angled As KL but with angled head for inaccessible locations Technical Data Length 220 mm Weight 34 g 0-3

14 Pliers KL-02-0 KL-02-3 KL-02-0 Tube Blocking Pliers Applicable on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes, Nissan, Opel/Vauxhall, VW etc For tightening of clamps (system Oetiker) on cv boots, water and fuel hoses Advantages No damage to spring band clamps No damage to hoses Easy and quick replacement of hoses Safe opening of spring band clamps, no slipping out No slipping off when opening the clamp Jaws are 360 rotatable to enable better reaching of the clamp s fishplate KL KL KL KL-02-2 KL-02-3 Tube Blocking Pliers Applicable on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes, Nissan, Opel/Vauxhall, VW etc For tightening of clamps (system Oetiker) on axle collars, water and fuel hoses With toggle joint KL-02-22, KL-02-23, KL-02-24, KL-02-2 Hose Clip Pliers with locking ratchet For replacement of hose-clips on Fuel-lines, Oil-pipes and waterhoses, which are not retained by Jubilee type clips, but re-usable, self-tensioning spring-clips Special design allows the spring hose clips to be securely gripped and safely expanded Suitable for Alfa Romeo, Audi, Citroën, Fiat, Ford, Hyundai, Lancia, MAN, Mercedes, Opel/Vauxhall, Peugeot, Porsche, Renault, Seat, Toyota, VW, Volvo, etc Following clips may be replaced with the Hose Clip Pliers Norma, ABA (AWAB), MIKALOR, MUBEA from Ø 8-3 mm KL Hose Clip Pliers straight with ratchet Clip -Ø 8-3 mm Length23 mm Weight 30 g KL Hose Clip Pliers 0 off-set tips with ratchet Clip -Ø 8-3 mm Length28 mm Clamp Angle 0 Weight 42 g KL Spare Part KL Hose Clip Pliers 0 off-set tips with ratchet Clip-Ø 8-3 mm Length22 mm Clamp Angle 0 Weight 403 g KL-02-2 Hose Clip Pliers with remote operation and ratchet Application as KL , but with remote control especially for difficult to reach positions Clip-Ø 8-3 mm Length22 mm Clamp Angle 0 Weight 403 g KL Replacement Bowden Cable 0-4

15 < Pliers KL KL-02-2 drive slots Universal space-saver, VW-Audi drive slots KL Hose Clip Pliers with locking handles (German Utility Model) For removal and replacement of Fuel-lines, Oil-lines, Radiators Hoses and Heater Hoses fitted with space-saving, re-usable, self-clamping spring hose clips Special design ensures that the compressed clips are safely and securely retained For Alfa Romeo, Citroën, Fiat, Ford, Hyundai, Lancia, Mercedes, Opel/Vauxhall, Peugeot, Porsche, Renault, Seat, Skoda, Toyota, Volvo, etc especially for the new Clips on fuel-lines on VW-Audi Following makes of Hose Clips require these Pliers Norma, ABA (AWAB), MIKALOR and MUBEA etc KL KL-02-2 drive slots Universal space-saver, VW-Audi KL-02-2 Hose Clip Pliers with locking handles (German Utility Model) As KL-02-26, but with pivoting tips Due to the pivoting tips, the compression forces are always parallel to the ears of the hose-clips offering increased security KL Hose Clip Pliers with locking ratchet angled (German Utility Model) As KL Version angled at 0 and has offset drive slots at the sides KL-02-4 drive slots KL-02-2 Hose Clip Pliers (German Utility Model) As KL Version with vertically mounted drive slots, without locking lever KL-02- KL-02-4 Geared Pliers For releasing and re-fitting reusable hose clips, types CLIC and CLIC-R (Caillau/Serflex) Application Audi, Citroen, Fiat, Mercedes, Opel/Vauxhall, Peugeot, Renault, VW, etc Weight 8 g KL-02-2 Mercedes, Opel, VW KL-02- / KL-02-2 Tube Blocking Pliers For releasing and re-fitting the re-usable hose clips types CLIC and CLIC-R (Caillau/Serflex) Suitable for VW-Audi, Citroën, Mercedes, Opel/Vauxhall, Peugeot, Renault, etc KL-02- for left hand jaws KL-02-2 for right hand jaws Technical Data Part No KL-02- KL-02-2 Length 0 mm 0 mm Weight 60 g 60 g 0-

16 Pliers KL KL KL KL KL-02-3 KL-02-3 Peugeot, Renault Opel/Vauxhall Fiat, GM KL Set of 3 Fuel-Line Pliers Pliers to open connectors on fuel-lines For Chrysler, Chevrolet, Citroën, Fiat, Ford, Opel/Vauxhall, Peugeot, Pontiac, Renault, VW etc On fuel-lines connected by "snap-fit connections, the connectors may be released using Pliers KL for Ø 8 mm and KL for Ø 0 mm fuel-lines (The release segments are to be found on the reverse side of the connector in the axis of the line) For connectors on Vauxhall/Opel GM, Fiat, etc where the release segments are activated from the side, Pliers KL (2 tips 6 x 6 mm) are required Contents KL Pliers for Fuel-lines Ø8 KL Pliers for Fuel-lines Ø0 KL Pliers for Fuel-lines GM-Opel/Vauxhall KL-02-3 Clamp Applications GM Opel/Vauxhall, Fiat, etc Clamp KL-02-3 for unlocking quick release connections, which can be reached from the side Advantages No damage to quick release connections or clamps No damage to fuel lines or hoses Easy and quick separation of fuel lines Technical Data Part-No KL KL KL KL-02-3 Fuel Line-Ø 8 mm 0 mm GM-Opel universal Length 0 mm 0 mm mm 24 mm Weight g g 0 g 4 g KL-02-0 Universal KL-02-3 Fuel Feed Pipe Pliers Applications Opel/Vauxhall, Fiat, GM, VW, etc For undoing quick release connections on fuel feed pipe lines Weight0 g KL-02-0 Universal KL-02-0 Hose Clamp Set (3 Pcs) Made of plastic For clamping hoses such as Radiator Hoses, Heater hoses, Fuel Hoses, etc with Ø up to 60 mm KL-02-0 Hose Removal Pliers Weight300 g For Easy Removal of /32 to ½ Vacuum and Fuel Hoses Engage the tube (line) with the black jaw This sharpened jaw actually DIGS into the tube to grip it! Squeeze and the hose is easily pushed off by the silver jaw Length200 mm Weight22 g 0-6

17 Pliers KL KL VW-Audi, Mercedes Mercedes Removal of Connector (opening the line) KL Safety Clip Pliers Suitable for all Audi A3, VW Golf IV with Petrol engines To release the fuel line unions Needed for example when the fuel filter is changed Suitable for Mercedes W24, W40 and W202 For installing retaining clips to secure the chrome strip on the bumper of the Mercedes W24, W40 and W202 Therefore, the pliers is equipped with special clip retaining notches Length 20 mm Weight200 g KL KL Universal VW-Audi, Ford KL Fuel Line Pliers Suitable for VW-Audi, Fiat, GM, Opel, Mercedes etc eg Mercedes M-Class with Petrol engines For removal and replacement of the connections on the in-line Fuel Filter Required when replacing the Fuel Filter or during engine repairs Removal of Connector Pull the connector backwards with the Pliers Replacing the Connector Slide the connector forwards with the Pliers KL Puller Pliers (Universal) KL VW-Audi, BMW, Mercedes For Valve Stem Sealing Rings The special long, slim form allows quick, easy and safe removal of valve-stem oil-seals, even on 4-valve cylinder heads KL Valve Shim Pliers For changing the valve shims while the cam followers are held depressed on VW-Audi engines 3 l and Ford KL-036- KL Glow-Plug Connector Pliers straight To remove stubborn and awkward to reach Glow-Plug connectors, found on the latest generation of engines eg Mercedes, BWM, VW-Audi etc VW-Audi, BMW, Mercedes KL-036- Glow-Plug Connector Pliers angled To remove stubborn and awkward to reach Glow-Plug connectors, found on the latest generation of engines eg Mercedes, BWM, VW-Audi etc 0-

18 Pliers KL-02- KL-02- Spark Plug Pliers Forged and with offset jaws for pulling off or putting on spark plug connectors, especially heat protection connectors on VW, Audi, Opel/Vauxhall, Porsche, etc KL-02- KL-02- Spark Plug Pliers With 30 angled sleeve jaws for careful and safe removal and replacement of shrouds, especially for heat protection shrouds KL-02-6 Applicable on almost every vehicle KL-02-6 Spark Plug Pliers KL-02- With 0 angled, long sleeve jaws Grooves in the jaws prevents from slipping off from the socket The long jaws allow pulling off of very deep positioned spark plug connectors and offer additional safety distance to the hot engine Applicable on almost every vehicle KL-02- Spark Plug Pliers KL-02-2 Application for Audi, BMW, Mercedes, Opel/Vauxhall, VW KL-02-2 Safety Clip Pliers Mercedes For removal of the Fuel Return Line from injectors on Diesel engines KL Applicable on Mercedes diesel engines OM604, OM60, OM606 with 4-valve technology KL Safety Clip Pliers KL For removal of returning hoses on injection nozzles of diesel engines Especially applicable on Mercedes OM60, OM602, OM603 and VW-Audi vehicles, where the injection nozzles are located very deep in the cylinder head KL Flat Pliers With extra long grip, for difficult to get to positions Length 280 mm KL-02-2 KL-02-2 Flat Pliers 4 With extra long grip, angled 4, for difficult to get to positions Length 280 mm 0-8

19 Pliers KL-00-4 KL-00-4 Upholstery Pliers Universal For removal of door inner-linings and other trim items held in place by plastic rivets KL-00-4 KL-00-4 Rivet Removal Pliers With 0 rotating head To remove 2-part re-usable plastic rivets - examples on Trim or inner door facings KL-00- By lifting the central spreader pin with the Pliers KL-00-4 the Plastic Rivet may be withdrawn KL-00- Windscreen Moulding / Door Handle Clip Pliers For removal and replacement of the Ω Retaining Clips on Sun Visors, Rear-view Mirrors and Window-winders, etc This tool is applicable to most vehicles KL The tool prevents damage to Visors, Head-linings, Doorlinings, etc KL Bulb Pliers (universal) Application VW-Audi, Opel, Ford, Mercedes, BMW, etc KL-00- For quick and easy removal of bulbs from dashboards etc KL-00- Hog Ring Pliers For closing Hog Rings to repair passenger car seats (various manufacturers) KL-00-2 KL-00-2 Bulb Pliers (universal) For the removal of small light bulbs (Ø 4-6 mm) from dashboards etc KL-00-3 Length 3 mm Weight 8 g KL-00-3 Relay Pliers - angled 0 For removal and installation of stubborn relays in narrow space conditions Applicable on VW-Audi, BMW, Ford, Mercedes, Opel, etc 0-

20 KL-4443-Series KL KL Socket-Inserts hex - 4 hex 3 c KL Double Ring Spanner Set Torx (4 pcs) Special Chrome Vanadium Steel matt chrome finish Consists of Part-No KL KL KL KL Description Double Ring Spanner Torx E6 / E8 Double Ring Spanner Torx E0 / E2 Double Ring Spanner Torx E4 / E8 Double Ring Spanner Torx E20 / E24 = reg trademark of Camcar-Textron Inc USA KL Special Socket Set For quick and easy loosening and tightening of nuts and bolts in difficult to reach locations Advantages Sockets with central bore for such applications as Studs, Hand Brake Cables, etc Long Ratchet Handle, with very low profile (24 mm incl socket), for use in very restricted spaces Reversible direction - Left and Right Contents Weight0 g Description Size Drive Length Qty Ratchet Ring Spanner long 3 mm 400 mm Socket mm 3 mm 20 mm Socket 8 mm 3 mm 20 mm Socket mm 3 mm 20 mm Socket 0 mm 3 mm 20 mm Socket mm 3 mm 20 mm Socket 2 mm 3 mm 20 mm Socket 3 mm 3 mm 20 mm Socket 4 mm 3 mm 20 mm Socket extension 3 mm 3 mm 0 mm Wooden case KL Crow Foot Spanner Set pcs Special Chrome Vanadium Steel Matt chrome finish Drive 3/8" Specially designed to loosen and tighten nuts and bolts in confined spaces - eg Fuel Injector connections consists of Part No Description KL-44-6 Crow Foot Spanner 6 mm KL-44- Crow Foot Spanner mm KL-44-8 Crow Foot Spanner 8 mm KL-44- Crow Foot Spanner mm KL-44-2 Crow Foot Spanner 2 mm KL Open Ended Spanner Socket Suitable for Steering Rack Opel Vectra B, etc KL / KL H W L W2 d Extra-strong version, ideal for unscrewing or turning track rods Drive /2" Part-No Hex Length [L] Height [H] Width [W] Width 2 [W2] Weight [g] KL mm 20 mm 4, mm 32 mm 300 KL Open Ended Spanner Socket As KL but with hex 2 mm eg suitable for Steering Rack Opel Sintra, etc Drive /2" Part-No Hex Length [L] Height [H] Width [W] Width 2 [W2] Weight [g] KL mm 20 mm 4, mm 3 mm

21 KL KL Open Ring Spanner Socket Set H W O L W2 Open 2-sided spanners are exceptionally compact and strong, so that even screws and nuts that are difficult to reach or turn can be loosened and tightened Drive /2" KL d Part-No Hex Length Height Width Width 2 Opening Weight (mm) [L] [H] [W] [W2] [O] [g] KL mm 20 mm 3 mm 3 mm 2 mm 0 KL mm 20 mm 34 mm 3 mm 4 mm 0 KL mm 20 mm 34 mm 3 mm 4 mm 0 KL mm 2 mm 3 mm 3 mm, mm 32 KL mm 2 mm 44 mm 3 mm 8 mm 30 H KL W O L d W2 KL Open Ring Spanner Socket Set As KL but consists of Drive /2" Part-No Hex Length Height Width Width 2 Opening Weight (2-point) [L] [H] [W] [W2] [O] [g] KL mm 2 mm 48 mm 34 mm 20 mm 360 KL mm 2 mm 0 mm 34 mm 22, mm 360 KL mm 2 mm 2 mm 34 mm 2 mm 360 W O W2 KL Open Ring Spanner Socket Set H L As KL But with 3/4" Drive KL e consists of Part-No Hex (2-point) Length [L] Height [H] Width [W] Width 2 [W2] Opening [O] Weight [g] KL mm 2 mm 66 mm 48 mm 28, mm 8 KL mm 30 mm 0 mm 48 mm 2 mm 83 KL mm 30 mm mm 48 mm 33 mm 0 d KL Open Ended ring wrench Socket Specially designed to loosen and tighten nuts and bolts in confined spaces - eg Fuel Injector connections Technical Data Drive /2" Length 00 mm Consists of Part-No Hex Description (2-point) KL Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL-40-3 KL-40-3 Open Ended ring wrench Socket As KL but as hex wrench and 80 mm long d Technical Data Drive /2" Consists of Length 80 mm Part-No Hex Description (6-point) KL Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL-40-3 Open Ended ring wrench Socket KL Open Ended ring wrench Socket KL-40-3 Open Ended ring wrench Socket 0-2

22 KL L L 2 KL Allen Key Set short (with collapsible holder) 0 pcs Surface chrome (not illustrated) Weight300 g Hex (mm) Length L Length L 2, 4 mm 6 mm 2 2 mm 8 mm 2, 8 mm 20 mm 3 66 mm 22 mm 4 4 mm 2 mm 8 mm 32 mm 6 6 mm 3 mm 8 08 mm 44 mm 0 22 mm mm KL Allen Key Set long (with collapsible holder) KL L 2 0 pcs Surface chrome Weight30 g Hex (mm) Length L Length L 2, 8 mm 6 mm 2 83 mm 8 mm 2, 0 mm 20 mm 3 mm 22 mm 4 0 mm 2 mm 20 mm 32 mm 6 3 mm 3 mm 8 62 mm 4 mm 0 80 mm 4 mm L KL Allen "Ball" Key Set long (with collapsible holder) KL L 2 0 pcs Surface chrome Weight30 g Hex (mm) Length L Length L 2, 8 mm 6 mm 2 83 mm 8 mm 2, 0 mm 20 mm 3 mm 22 mm 4 0 mm 2 mm 20 mm 32 mm 6 3 mm 3 mm 8 62 mm 4 mm 0 80 mm 4 mm KL Torx Key Set short (with collapsible holder) KL L L 2 pcs Surface chrome Weight300 g Torx Length L Length L 2 T 8 mm 2 mm T0 62 mm 23 mm T 68 mm 2 mm T20 3 mm 2 mm T2 mm 2 mm T2 83 mm 30 mm T30 88 mm 32 mm T40 6 mm 3 mm T4 04 mm 40 mm T0 4 mm 44 mm KL Torx Key Set long (with collapsible holder) L pcs Surface chrome Weight30 g Torx Length L Length L 2 T 82 mm mm T0 88 mm 20 mm T 3 mm 22 mm T20 mm 23 mm T2 04 mm 2 mm T2 0 mm 26 mm T30 20 mm 30 mm T40 3 mm 33 mm T4 4 mm 3 mm T0 80 mm 4 mm = reg trademark of Camcar-Textron Inc USA 0-22

23 KL K? ; < KL K Screwdriver Set with inter-changeable blades In plastic case The handle has a /4 Blade Receiver and a hexagonal drive 0 mm The blades are lockable at lengths of 80 and 3 mm? ; < Torx sizes T0, T, T20, T2, T30 and T40 Hex sizes 3, 4, and 6 Straight sizes 4,, 6 and Phillips sizes PH, PH2 and PH3 Pozidriv sizes PZ, PZ2 and PZ3 Weight 660 g KL Torx Screwdriver Set (6 pcs) KL T0 KL T KL T20 KL T2 KL T2 KL T30 KL The long, slim design of the shaft allows deep-set Torx Bolts to be reached without problem Consists of T0, T, T20, T2, T2, T30 Shaft Ø T0 (4, mm); T (4, mm); T20 (4, mm); T2 (4, mm), T2 ( mm); T30 (, mm) Shaft Length 200 mm Overall length 300 mm Specially used for T20 removal and replacement of door-handles on Mercedes A- and C-Class T2 removal and replacement of headlamps on VW Sharan model year onwards T30 for front wing bolts on BMW series (E38), also removal and replacement of headlamps on Audi A6 KL T0 KL KL Torx T-Handle Screwdriver Set ( pcs) T20 KL T2 KL T40 KL T KL T2 KL T30 KL The long, slim design of the shaft allows deep-set Torx Bolts to be reached without problem Shaft satin chrome finish with black tips Consists of T0, T, T20, T2, T2, T30, T40 Shaft Ø T0 (6 mm); T (6 mm); T20 (6 mm); T2 (6 mm), T2 (6 mm); T30 (6 mm); T40 ( mm) Shaft Length 30 mm Overall length 38 mm Specially used for T30 For front wing bolts on BMW series (E38), also removal and replacement of headlamps on Audi A6 T30/T40 For removal and replacement of oil-sump on VW-Audi = reg trademark of Camcar-Textron Inc USA 0-23

24 KL KL Torx Screwdriver Set (6 pcs) Chrome-vanadium-Steel 00 mm Consists of Part-No Description Qty KL Torx Screwdriver E4 x 00 mm KL Torx Screwdriver E x 00 mm KL Torx Screwdriver E6 x 00 mm KL Torx Screwdriver E x 00 mm KL Torx Screwdriver E8 x 00 mm KL Torx Screwdriver E0 x 00 mm = reg trademark of Camcar-Textron Inc USA KL K KL K Insert Bit Set 0 mm hex / Multi-spline / Torx Consists of KL Bit-Holder, 0 mm hex female; Drive 3/8" the carrier of the Inserts, KL Bit-Holder, 0 mm hex female; Drive /2" the carrier of the Inserts, Bit Inserts, Drive 0 mm hex; Length 30 mm (hex) (hex) KL hex 4 KL hex 8 KL hex KL hex 0 KL hex 6 KL hex 2 KL hex KL M KL M0 KL M6 KL M2 KL (3/8" ) KL (/2" ) hex0 KL M8 KL T20 KL T4 KL T2 KL T0 KL T30 KL T KL T40 KL T60 KL (30mm) KL ( mm) Bit Inserts, Drive 0 mm hex; Length mm (hex) (hex) KL hex 4 KL hex 8 KL hex KL hex 0 KL hex 6 KL hex 2 KL hex KL (30mm) KL ( mm) KL M KL M0 KL M6 KL M2 KL M8 KL (30 mm) KL ( mm) KL T20 KL T4 KL T2 KL T0 KL T30 KL T KL T40 KL T60 KL Plastic case (empty) for KL K 0-24

25 KL K Specification Magnetic Lifter with scriber Screwdrivers Double Ring Spanners Sockets, Drive /2" Bit-Holder, Drive /2" auf hex 0 Bit-Inserts, Driver hex 0 < Sockets, Driver /4" < Bit-Holder, Driver /4" auf hex /4" Bit-Inserts, Driver hex /4" 8 Torx Keys < KL K Torx Tool Set Consists of Magnetic Lifter KL Head-Ø, mm; - 6 mm; Weight 28 g; lift-capacity 400 g Screwdrivers KL T8 x 80 mm KL T2 x 00 mm KL T0 x 00 mm KL T2 x 00 mm KL T x 00 mm KL T30 x 00 mm KL T20 x 00 mm KL T40 x 00 mm Double Ring Spanners KL E6 / E8 KL E4 / E8 KL E0 / E2 KL E20 / E24 Sockets, Drive /2", Length 38 mm KL Torx E2 KL Torx E20 KL Torx E4 KL Torx E22 KL Torx E6 KL Torx E24 KL Torx E8 Bit-Holder hex0 KL Drive /2" Bit-Inserts, Drive hex 0; Length 30 mm KL Torx T40 KL Torx T KL Torx T4 KL Torx T60 KL Torx T0 Bit-Inserts, Drive hex 0; Length mm KL Torx T KL Torx T4 KL Torx T20 KL Torx T0 KL Torx T2 KL Torx T KL Torx T30 KL Torx T60 KL Torx T40 Sockets, Drive /4", Length 23 mm KL Torx E4 KL Torx E8 KL Torx E KL Torx E0 KL Torx E6 KL Torx E KL Torx E Socket Inserts, Drive /4", Length 38 mm KL Torx T KL Torx T20 KL Torx T8 KL Torx T2 KL Torx T KL Torx T2 KL Torx T0 KL Torx T30 KL Torx T Bit-Holder hex /4" KL Drive /4" Bit-Inserts 8, Drive hex /4" KL Torx TB KL Torx T20B KL Torx T8B KL Torx T2B KL Torx TB KL Torx T2B KL Torx T0B KL Torx T30B KL Torx TB KL Torx T40B Torx Keys KL Torx T8 KL Torx T30 KL Torx T0 KL Torx T40 KL Torx T KL Torx T4 KL Torx T20 KL Torx T0 KL Torx T2 KL Torx T KL Torx T2 KL Torx T60 KL Plastic case, for KL K (empty) = reg trademark of Camcar-Textron Inc USA 0-2

26 KL K KL K Socket Insert Set Torx Consists of KL Bit-Holder, hex 0 mm; Drive 3/8" carrier for the screwdriver Inserts KL Bit-Holder, hex 0 mm; Drive /2" carrier for the screwdriver Inserts Bit-Inserts, Drive hex 0 mm; Length 30 mm KL T20 KL T4 KL T2 KL T0 KL T30 KL T KL T40 Bit-Inserts, Drive hex 0 mm; Length mm KL (3/8" ) KL (30 mm) KL (23 mm) KL (40 mm) KL (/2" ) KL ( mm) KL (23 mm) KL Torx T20 KL Torx T4 KL Torx T2 KL Torx T0 KL Torx T30 KL Torx T KL Torx T40 Sockets, Drive /4", Length 23 mm KL Torx E4 KL Torx E KL Torx E KL Torx E8 KL Torx E6 Sockets, Drive 3/8", Length 23 mm Part-No Size KL Torx E0 KL Torx E2 KL Torx E KL Torx E4 Sockets, Drive /2", Length 40 mm KL Torx E6 KL Torx E22 KL Torx E8 KL Torx E44 KL Torx E20 KL K Plastic case KL (empty) for KL K = reg trademark of Camcar-Textron Inc USA KL K Socket Insert Set RIBE Consists of KL Bit-Holder, hex 0 mm; Drive 3/8" carrier for the screwdriver Inserts KL Bit-Holder, hex 0 mm; Drive /2" carrier for the screwdriver Inserts Bit-Inserts, Drive hex 0 mm; Length 30 mm KL (3/8" ) KL (30mm) KL (/2" ) KL-404- ( mm) KL M 4 KL M KL M KL M 0 KL M 6 KL M 2 KL M KL M 3 KL M 8 KL M 4 Bit-Inserts, Drive hex 0 mm; Length mm KL M 4 KL M KL M KL M 0 KL M 6 KL M 2 KL M KL M 3 KL M 8 KL M 4 Plastic case KL (empty) for KL K = reg trademark of Richard Bergner GmbH & Co KG 0-26

27 KL /4" KL /4" /6" /6" KL Bit-Driver, angled /4" and /6" with retaining magnet Reversible for Left or Right rotation With Drives for /6 and /4" Bit Inserts Each Bit-Drive has a knurled thumb-wheel for rapid insertion of bolts before final tightening The Bit-Inserts are retained in the drive by a built-in magnet Especially useful for difficult accessible places Technical Data Weight 20 g Length 32 mm Bit- Drive /4" Bit- Drive /6 KL Bit-Driver, straight /4" and /6" with retaining magnet As KL but straight and 40 mm long KL /4" KL Flexible Bit Holder with flexible extension, /4" Especially useful for difficult accessible places Length Screw Driver 3 mm Length Extension 3 mm Bit- Drive /4" Weight 20 g KL /4" KL Bit Holder /4" With Drives for /4" Bit Inserts The Bit-Inserts are retained in the drive by a built-in magnet Length 20 mm Bit- Drive /4" Weight 00 g KL Mercedes (Atego, Actros) VW-Audi, Rover, MG ZT KL Socket Insert Set (Five point), /4" Chrome Vanadium Steel piece Socket Set on /4" Storage Rail For new point tamper-proof bolts Drive /4" Consists of Part-No Five L [mm] L2 [mm] Weight [g] point KL KL KL KL KL KL KL KL L Storage Rail /4" 0-2

28 KL K KL (/2", mm) KL (/2", 40 mm) KL (/2", 200 mm) KL (/2", 00 mm) KL K Socket Insert Set Drive /2", XZN, 26 Pcs Consists of Socket Inserts, Drive /2", Length mm KL M KL M0 KL M6 KL M2 KL M8 KL M4 KL M KL M6 Socket Inserts, Drive /2", Length 00 mm KL M KL M0 KL M6 KL M2 KL M8 KL M4 KL M Socket Inserts, Drive /2", Length 40 mm KL M KL M0 KL M6 KL M2 KL M8 KL M4 KL M Socket Inserts, Drive /2", Length 200 mm KL M8 KL M2 KL M0 KL M4 KL Plastic case (empty) for KL K KL KL Extra long Extra long 800 mm 800 mm VW-Audi VW-Audi KL Socket Insert XZN M8 For loosening the screws at the drive shaft quick and easy from outside Increased job time saving Application VW-Audi, etc Length800 mm Drive ½ KL Socket Insert XZN M0 KL KL Extra long 800 mm VW-Audi Application as KL Length800 mm KL Socket Insert XZN M2 Application as KL Specially applicable for VW T4, Touareg etc Length800 mm Drive ½ Drive ½ Extra long 800 mm KL Socket Insert XZN M4 Application as KL Specially applicable for VW T4, Touareg etc Length800 mm Drive ½ KL VW-Audi KL Socket Insert XZN M6 Oil Drain Plug For removal and replacement of the Gear Box drain plug Application Audi A3, A4, A6; VW Golf IV, LT Length60 mm Drive ½ 0-28

29 KL K KL K Socket Insert Set Drive /2", RIBE, 32 Pcs Consists of Socket Inserts, Drive /2", Length mm KL M KL M0 KL M6 KL M2 KL M KL M3 KL M8 KL M4 KL M KL (/2", mm) KL (/2", 40 mm) KL-40-3 (/2", 00 mm) Socket Inserts, Drive /2", Length 00 mm KL M KL M0 KL M6 KL M2 KL M KL M3 KL M8 KL M4 KL M Socket Inserts, Drive /2", Length 40 mm KL M8 KL M2 KL M KL M3 (FIAT) KL M0 (VW) KL M4 KL M0 (FIAT) KL (/2", 200 mm) KL A Fiat Socket Inserts, Drive /2", Length 200 mm KL M8 KL M2 KL M KL M3 (FIAT) KL M0 (VW) KL M4 KL M0 (FIAT) KL Plastic case (empty) for KL K KL A Socket Insert Set- Drive /2",RIBE To remove and re-tighten cylinder-head retaining bolts eg on Fiat engines with RIBE-profile Socket Inserts, Drive /2", Length mm KL M KL M8 Socket Inserts, Drive /2", Length 40 mm KL M0 (FIAT) KL M3 (FIAT) KL M2 KL M4 KL VW-Audi KL Special Socket RIBE M0 (VW) Ideal to remove and re-tighten cylinder-head retaining bolts on VW-Audi engines with RIBE similar profile Drive /2" Length 40 mm = reg trademark of Richard Bergner GmbH & Co KG 0-2

30 KL KL K KL K KL K KL (/2", mm) KL (/2", 40 mm) KL (/2", 200 mm) = reg trademark of Camar-Textron Inc USA BMW, Mercedes d 8 d KL (/2", 00 mm) KL Socket Set Torx (4 Pcs) These Torx Sockets in extended length with built-in magnet allow quick and easy removal and replacement of cylinderhead bolts with outer-torx profiles (eg BMW, Mercedes CDI engines, etc) Sockets, Drive /2", Length 0 mm KL E0 KL E4 KL E2 KL E8 KL K Socket Set Torx Set of Torx Sockets in extended length for tamper-proof bolts Torx Socket Inserts, Drive /2", Length 00 mm 8 8 KL T30 KL T KL T40 KL T60 KL T4 KL T0 KL T0 KL K Socket Set Torx Strong sockets complete with plastic box Application for repairs on axles and engines Socket Inserts, Drive /2", Length 8 mm KL T30 KL T KL T40 KL T60 KL T4 KL T0 KL T0 KL K Socket Insert Set Drive /2", Torx, 32 Pcs Consists of Socket Inserts, Drive /2", Length mm KL T20 KL T4 KL T2 KL T0 KL T2 KL T KL T30 KL T60 KL T40 KL T0 Socket Inserts, Drive /2", Length 00 mm KL T20 KL T4 KL T2 KL T0 KL T2 KL T KL T30 KL T60 KL T40 KL T0 Socket Inserts, Drive /2", Length 40 mm KL T40 KL T KL T4 KL T60 KL T0 KL T0 Socket Inserts, Drive /2", Length 200 mm KL T40 KL T KL T4 KL T60 KL T0 KL T0 KL Plastic case (empty) for KL K 0-30

31 KL K KL (/4", 0 mm) KL (/4", 0 mm) KL K KL (/2", mm) KL K KL (/2", mm) KL (/2", 40 mm) KL (/2", 200 mm) b c KL (3/8", mm) KL (/2", mm) KL (/2", 00 mm) KL K Socket Set Drive /2"/3/8", Torx Extra long and slim design Sockets, Drive /4", Length 0 mm KL E4 KL E KL E KL E8 KL E6 KL E0 Sockets, Drive 3/8", Length mm KL E KL E6 KL E2 KL E8 KL E4 KL Reducer 3/8" to /4" Length 26, mm KL Plastic case (empty) for KL K KL K Socket Insert Set Drive /2", Torx / Hex Socket Inserts, Drive /2", Length mm KL T30 KL T KL T40 KL T60 KL T4 KL T0 KL T0 Socket Inserts, Drive /2", Length mm KL M KL M0 KL M6 KL M2 KL M KL M4 KL M8 = reg trademark of Camcar-Textron Inc USA KL K Socket Insert Set Drive /2", Hex, 30 Pcs Socket Inserts, Drive /2", Length mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm Socket Inserts, Drive /2", Length 00 mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm Socket Inserts, Drive /2", Length 40 mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm Socket Inserts, Drive /2", Length 200 mm KL mm KL mm KL mm KL mm KL mm KL mm KL Plastic case (empty) for KL K 0-3

32 KL KL Socket Insert Set Drive /4", Torx b Socket Inserts, Drive /4", Length 200 mm KL T KL T20 KL T8 KL T2 KL T KL T2 KL T0 KL T30 KL T KL T40 Chrome-vanadium-Steel KL KL KL KL c b c d KL Socket Insert Set Drive 3/8", Torx Socket Inserts, Drive 3/8", Length 200 mm KL T0 KL T30 KL T KL T40 KL T20 KL T4 KL T2 KL T0 KL T2 KL T Chrome-vanadium-Steel KL Socket Set Torx /4" Sockets, Drive /4", Length 200 mm KL E4 KL E KL E KL E8 KL E6 KL E0 Chrome-vanadium-Steel KL Socket Set- Torx 3/8" Sockets, Drive 3/8", Length 200 mm KL E6 KL E0 KL E KL E KL E8 KL E2 Chrome-vanadium-Steel = reg trademark of Camcar-Textron Inc USA KL Socket Insert Set Ball head Extra-long design with ball head Ideal for unscrewing and tightening internal socket screws that sit very deep or are hard to access Socket Inserts, Drive /2", Length 288 mm KL hex mm KL hex 8 mm KL hex 6 mm KL hex 0 mm Application examples KL For oil sump bolts in VW T4 -cylinder engines; KL Removal and installation of knock sensor on Audi V6 engines 0-32

33 KL K KL-036- /- /-2 /-4 / KL KL-02-4 KL KL KL KL KL KL c c c c c d d d c KL K Jointed Socket Set With Special 6-point Flank-Drive Profile Jointed Sockets, Drive 3/8", Length mm Part-No hex Part-No hex KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL mm KL Plastic case (empty) for KL K Spark-Plug / Jointed Glow Plug Socket 3/8" Part-No hex D L Weight [mm] [mm] [g] KL mm 6 8 KL mm 6 80 KL mm 0 0 KL mm 0 8 KL mm Spark-Plug Socket Set 3/8" Part-No hex D [mm] L [mm] Weight [g] KL mm KL mm KL mm Spark-Plug Socket Set /2" Part-No hex D [mm] L [mm] Weight [g] KL mm KL mm KL Extension, Length 600 mm 600 mm from /2 to 3/8 This tool is essential for works on gearbox, engine and on the exhaust system Drive /2" to 3/8" KL Breaker Bar /2", 620 mm Extra long version with 80 joint Useful for extremely stubborn fastenings Technical Data Length total 620 mm Drive/2" 0-33

34 Plastic case Universal-plastic case with foamed material liner KL Plastic case Measurement outside 2x230x83 mm (WxHxD) inside 26xx mm (WxHxD) KL Plastic case KL Measurement outside 340x2x83 mm (WxHxD) inside 326x222x mm (WxHxD) KL-40-0 Plastic case KL Measurement outside 40x36x06 mm (WxHxD) inside 43x2x00 mm (WxHxD) KL K KL-40-0 Pre-formed wooden trays with dimensions 0 x 440 x 40 mm offer a new form of tool storage Advantages Immediate check if any tools are missing Orderly storage due to pre-formed inserts for each component Time-savings from elimination of hunting for the right tool KL K KL KL Wooden Storage Tray (empty) To store Spring Compressors KL-003, KL-00 or KL-2000 with Jaws KL-00-SP, KL-0-SP, KL-20-SP and KL-6 as well as the Adaptor KL-0- KL K Wooden Storage Tray complete with Tools consists of Part No Description Part No Description KL Compressor Cylinder KL-20-SP Jaws size 2 KL-00-SP Jaws size 0 with Protective Inserts with Protective Inserts KL-6 Jaw size 6 KL-0-SP Jaws size KL-0- Adaptor with Protective Inserts KL Storage Tray empty KL Wooden Storage Tray (empty) To store the Bearing Puller Tool Sets KL , KL or KL with the Press Tool KL and the Hydraulic Cylinder KL KL K Wooden Storage Tray complete with Tools consists of Part No Description Part No Description KL Bearing Puller for Europ & Jap cars KL Press Tool KL Hydraulic Cylinder KL Storage Tray empty KL Wooden Storage Tray (empty) To store the Hydraulic Press Tool Kits, KL , KL , KL , KL , KL , KL or KL KL Hydraulic Press Tool Kit (short version) consists of Part No Description Part No Description KL-02-0 Hydraulic Cylinder KL Press Tube Set t (Ø mm) KL Press Frame short KL Press Tube Set short KL Adaptor (Ø mm) KL Rubber Ring KL Storage Tray empty 0-34

Engines. Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1

Engines. Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1 Engines Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1 6-2 (202) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 Engines Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany -

More information

Body and Interior Tools

Body and Interior Tools 9-01 KL-0145-90 KL-0145-90 Hydraulic Alignment Set 10 t. The Hydraulic Press Set KL-0145-90 allows Pressing and Spreading functions. Contents: Contents 3 4 1 2 5 6 8 Part No. Description Qty. 1 Hydraulic

More information

Brake Service Tools. Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 5-01

Brake Service Tools. Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 5-01 -01 KL-0111-1 KL-0111-2 KL-0113-20 K Universal Accessories: KL-0113-2010 KL-0112-0008 KL-0112-0013 KL-0112-3 KL-0111-1 Caliper Pressing Tool with narrow jaws For fully floating caliper with single or double

More information

Engine Tools Fuel System

Engine Tools Fuel System Fuel System KL-0124-4 KL-0124-4 Pressure- and Vacuum-Pump With plastic storage case for checking of pressure and vacuum lines. Recommended from following manufacturers: VW-Audi, Porsche, Chrysler, Daihatsu,

More information

Engine Tools Cooling System

Engine Tools Cooling System KL-0124-0 Pump directly on Pump indirectly on KL-0124-0 Pressure Tester The Pressure Tester KL-0124-0 is made from metal. It consists of a quick clutch, a pressure relief valve and a flexible tube. This

More information

Handle: 20" Chain: 25"

Handle: 20 Chain: 25 Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT

More information

Clutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly

Clutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly Copyright GEDORE Automotive GmbH, Germany (465) -01 KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.) Suitable for Self-Adjusting Clutches (with 6 and 8 bolt holes); e.g. on VW-Audi,

More information

Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"

Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 20 Chain: 25 JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling

More information

General Tools. Ring Wrench FT-536. Nut Wrench FT-677 FT-687 FT-707 CJ-770 CJ-800 CY-030 CJ-123 FT-258A

General Tools. Ring Wrench FT-536. Nut Wrench FT-677 FT-687 FT-707 CJ-770 CJ-800 CY-030 CJ-123 FT-258A Ring Wrench FT-536 Multi-Function Socket Set For use with hydraulic, A/C and plumbing fittings, tie-rod ends, O2 sensors and diesel injectors. For hard to reach fasteners where an open end wrench will

More information

Handle: 20" Chain: 25"

Handle: 20 Chain: 25 JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT

More information

Body and Interior Tools

Body and Interior Tools -01 KL-0145-0 KL-0145-0 Hydraulic Alignment Set 10 t. The Hydraulic Press Set KL-0145-0 allows Pressing and Spreading functions. Contents: Specification: 3 4 1 2 5 6 7 8 Part No. Description Qty. 1 Hydraulic

More information

1 JULY ~ 30 AUGUST 2013 Micro - Tec

1 JULY ~ 30 AUGUST 2013 Micro - Tec *All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM

More information

Transmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1

Transmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 Transmission Transmission Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 (449) 8-01 KL-0140-2 Meter for Coefficient of Friction PM KL-0140-2 For accurate adjustment of bearing pre-load when repairing

More information

Removing Tool for stick-on weights

Removing Tool for stick-on weights hassis Wheels Valve Tool Y& Removing Tool for stick-on weights Four-Way Rim Wrenches For installing and removing the valve inserts on aircraft landing gears 666-3 136346 Tire Tread Depth Gauge & For removing

More information

TOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944

TOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944 TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:

More information

HAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since

HAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty

More information

ENGINE - GLOW PLUGS. Innovation is our mission!

ENGINE - GLOW PLUGS. Innovation is our mission! ENGINE - GLOW PLUGS Innovation is our mission! 1 PAGE 2 3 GLOW PLUG CONNECTOR PLIERS 268 4 5 STANDARD NUT SOCKETS FOR GLOW PLUGS 268-269 6 7 GLOW PLUG SCREWING AID 269 8 TORQUE TOOLS 270 RATCHET RING SPANNER

More information

Spring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec

Spring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet

More information

GENERAL TOOLS. Strong head design for professional use. Chrome molydbenum steel. Strong head design for professional use. Chrome molydbenum steel.

GENERAL TOOLS. Strong head design for professional use. Chrome molydbenum steel. Strong head design for professional use. Chrome molydbenum steel. OT-135 1/2" DR. x 30" HEAVY DUTY BREAKER BAR Strong head design for professional use. Chrome molydbenum steel. OT-135A 1/2" DR. x 18" HEAVY DUTY BREAKER BAR Strong head design for professional use. Chrome

More information

902062MR08 62 Piece Tool Box Set R

902062MR08 62 Piece Tool Box Set R P.O. Box 2022, Florida Hills 1716 40 Beacon Road, cnr. Ontdekkers Road Florida North Tel: 011 672 6229 011 672 2214 Fax: 011 472 2550 E-mail: info@randboltandtool.co.za Website: www.randboltandtool.co.za

More information

Size 225mm. 425mm 760mm. Code. Code. Size 225mm SYK038600

Size 225mm. 425mm 760mm. Code. Code. Size 225mm SYK038600 STRAP WRENCH - HEAVY DUTY - RT12/273B STRAP WRENCH - 12005 Lever handle made from hardened heavy gauge steel Heavy duty bonded strap for extra strength Comfortable vinyl grip Ideal for use on automotive

More information

PROFESSIONAL TOOLS SERIES. Engine Service Tools

PROFESSIONAL TOOLS SERIES. Engine Service Tools PROFESSIONAL TOOLS SERIES 115 Engine Service Tools ENGINE Automotive SERVICE Repair TOOLS Tools 116 PROFESSIONAL TOOLS SERIES Al010006A PULLEY REMOVING WRENCH Ideal for removing and assembling any type

More information

SONIC GM Express Service Tool Kit*

SONIC GM Express Service Tool Kit* SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,

More information

1/2" Spline Bit Socket M17. 1/4" Inch Sockets "Pro-Torque " New Items May /4" Deep Inch Sockets "Pro-Torque " 3/8" Sockets "Pro Torque "

1/2 Spline Bit Socket M17. 1/4 Inch Sockets Pro-Torque  New Items May /4 Deep Inch Sockets Pro-Torque  3/8 Sockets Pro Torque 1/2" Spline Bit Socket M17 - length: 60 mm - especially for cylinder head screws in Daimler Benz engines M400-420-500, use like MB-Nr. 422589010900 - knurled 5180-M17 1/4" Inch Sockets "Pro-Torque " -

More information

14 Miscellaneous tools

14 Miscellaneous tools 14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking

More information

PULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24

PULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24 PULLERS INTERNAL EXTRACTORS Precision internal extractor Slide hammer Suitable for small ball bearings Ideal for limited access areas Centering shaft For the accurate fitting of bearings and bushes 660.0501

More information

NEW 2012 WHA T S PRODUCTS

NEW 2012 WHA T S PRODUCTS NEW 2012 WHA T S PRODUCTS Cable Tie Gun Provides automatic tensioning and cut off of cable ties to produce a neat, clean and professional finish Simply wrap the cable tie around the item or job, feed the

More information

Battery Circuit Testers Dashboard & Radio Ignition Service Soldering Voltage Testers Spark Plug General ELECTRICAL SERVICE

Battery Circuit Testers Dashboard & Radio Ignition Service Soldering Voltage Testers Spark Plug General ELECTRICAL SERVICE Battery Circuit Testers Dashboard & Radio Ignition Service Soldering Voltage Testers Spark Plug General ELECTRICAL SERVICE 283 ELECTRICAL SERVICE Battery 303180 Battery Carrier Scissor Lock Type Used to

More information

Panel Beating Hammers

Panel Beating Hammers PANEL & TRIM Panel Beating Hammers n Polished forged, induction hardened hammer heads n Quality hickory timber handles wedged to heads for safety and retention 313055 313058 313056 313059 313057 313060

More information

STEERING AND SUSPENSION section 2

STEERING AND SUSPENSION section 2 STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three

More information

Valid until December 31, 2017 K17/EN/XX/0 TOOL CATALOGUE

Valid until December 31, 2017 K17/EN/XX/0 TOOL CATALOGUE Valid until December 3, 207 K7/EN/XX/0 TOOL CATALOGUE Table of contents Contents from page Tool trolley and work bench with assortment Tool trolleys and work bench Accessories VIGOR 000 Work Bench /Tool

More information

Master Sets with Foam Tray Organizers

Master Sets with Foam Tray Organizers Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)

More information

Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING

Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors utomotive Pullers & PULLING & EXTRCTING 337 PULLING & EXTRCTING Toledo Pullers comprehensive range including Mechanical,

More information

LISTA PRETURI SCULE BGS

LISTA PRETURI SCULE BGS LISTA PRETURI SCULE BGS COD PRODUS Description Pret in LEI cu TVA 9 BGS Shopping Bag 13,74 11 Miniature Aluminum Jack, 90 kgs 345,33 12 BGS T-Shirt, size S 96,18 13 BGS T-Shirt, size M 96,18 14 BGS T-Shirt,

More information

HEX-CELLENT TOOLS! ALLEN KEYS FOR EVERY APPLICATION DESIGNED FOR THOSE HARD TO REACH AREAS A GREAT ACCESSORY FOR CORDLESS SCREWDRIVER OR DRILL!

HEX-CELLENT TOOLS! ALLEN KEYS FOR EVERY APPLICATION DESIGNED FOR THOSE HARD TO REACH AREAS A GREAT ACCESSORY FOR CORDLESS SCREWDRIVER OR DRILL! HEX-CELLENT TOOLS! 7-PC 1/2" Hex Socket Set 60 GIVEN FOR ANY TRADE-IN Contains sizes 6, 8, 10, 12, 14, 17 & 19mm Manufactured from special alloy steel Nickel chrome plating protects against corrosion High

More information

PRODUCT CATALOGUE. Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3

PRODUCT CATALOGUE. Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77

More information

Wire Piercing Guide Heavy Duty Circuit Tester 6, 12, 24 Volt Professional Circuit Tester 6, 12 Volt

Wire Piercing Guide Heavy Duty Circuit Tester 6, 12, 24 Volt Professional Circuit Tester 6, 12 Volt ELECTRICAL SERVICE Wire Piercing Guide 302003 n Quickly and easily guides tester probe into the centre of vehicle electrical wires n Eliminates stabbing of fingers when piercing wires n Holds the circuit

More information

New Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054

New Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054 Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295

More information

Stanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set

Stanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene

More information

New HAZET Range of Pullers / Extractors

New HAZET Range of Pullers / Extractors 17 17 New HAZET Range of 2-Arm Pullers 3-Arm Pullers Hydraulic Pullers Ball Bearing Extractors Separators Internal Extractors Forged Quality Practical and Proven Tools New Innovative Range of Pullers For

More information

Contents c mm Ø Cerametallic & Organic Drive Plate Hub Spline Details H e l i x

Contents c mm Ø Cerametallic & Organic Drive Plate Hub Spline Details H e l i x Contents Part Number Legend... 2 The HELIX Racing Clutch Range... 4 Clutch Terminology... 5 Clutch Fitting & Flywheels... 6 Release Bearings... 7 Concentric Slave Cylinder Release Bearings... 8 Clutch

More information

BRAKE SERVICE. Innovation is our mission!

BRAKE SERVICE. Innovation is our mission! BRAKE SERVICE Innovation is our mission! 1 PAGE BRAKE PISTON RESET TOOL 576-579 BRAKE SENSOR CLEANING TOOL 579-580 BRAKE CALLIPER TOOL 580-582 COTTER PIN DRIVES 582-584 BRAKE SPRING TOOL 584-585 BRAKE

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211

More information

ENGINE - FUEL SYSTEM. Innovation is our mission!

ENGINE - FUEL SYSTEM. Innovation is our mission! ENGINE - FUEL SYSTEM Innovation is our mission! 1 2 PAGE 3 4 HOSE CLAMP TOOL 188-192 5 6 HOSE PINCH TOOL 192-193 7 8 FUEL PIPE CLAMP PLIERS 193-194 9 10 PIPE COUPLING UNLOCKING TOOL 194-195 11 PIPE WRENCH

More information

Light Source Replacement

Light Source Replacement Lighting Electrics Electronics Thermal Management Sales Support Technical Service Our Ideas, Your Success. Light Source Replacement Ideas today for the cars of tomorrow Table of contents Audi A2 1.4 TDI.............4

More information

General Maintenance Tool Kit (GMTK) Drawer layout

General Maintenance Tool Kit (GMTK) Drawer layout 26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,

More information

Drawing A Crankcase 041 AV SCS

Drawing A Crankcase 041 AV SCS Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18

More information

WELZH. VALID TO 31ST AUGUST WERKZEUG

WELZH. VALID TO 31ST AUGUST WERKZEUG WELZH. VALID TO 31ST AUGUST WERKZEUG 1 Hub Mate Supporting Adaptor 3200-ww 80.00 RRP Must have item for any garage! Designed for supporting Control Arms. The HUB MATE SUPPORTING ADAPTOR is used in conjunction

More information

04 Spanners and Wrenches

04 Spanners and Wrenches 04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet

More information

25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)

25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613) 25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317

More information

NEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece

NEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service

More information

REMOVAL & INSTALLATION

REMOVAL & INSTALLATION REMOVAL & INSTALLATION FRONT DISC BRAKE PADS 1. Raise and support front of vehicle. Remove wheels. Remove caliper bolt and brakeline bracket bolts. Pivot caliper aside. Remove pads and pad shim. Remove

More information

Car Body and Interior (491) Copyright GEDORE Automotive GmbH, Germany. formerly

Car Body and Interior (491) Copyright GEDORE Automotive GmbH, Germany. formerly Copyright GEDORE Automotive GmbH, Germany (41) -01 KL-018-0 KB KL-018-0 KB Wiper Arm Puller Set Suitable, e.g., for VW-Audi, BMW, Citroën Ford, Mercedes, Opel/Vauxhall, Peugeot, Renault etc. An indispensable

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1124 020 2116 1 Crankcase 2-15 2 0000 988 5215 1 Connector 3 9371 470 2610 2 Cylindrical pin 5x18 4 1120 162 5200

More information

2AZ-FE ENGINE CONTROL SYSTEM

2AZ-FE ENGINE CONTROL SYSTEM PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM 2AZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench Engine coolant temperature sensor 2 PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM RECOMMENDED

More information

Sockets and Accessories

Sockets and Accessories 152 153 Sockets and Accessories 6,3 (1/4") Square drive 160 10 (3/8") Square drive 176 12,5 (1/2") Square drive 192 20 (3/4") Square drive 219 25 (1") Square drive 226 Friction ype Ratchets 230 Impact

More information

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog# Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,

More information

3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)

3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM) 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench

More information

New Products! August 2016

New Products! August 2016 New Products! August 2016 9687 - Magnetic Pick Up Tool with Windscreen Washer Nozzle Cleaner. 9690-4 In 1 Circlip Pliers Stainless Steel Flexable Magnetic Pick Up Tool Complete with a Windscreen washer

More information

Bílaverkfæri. Kertalyklasett skrall 16+21mm 5stk. Vörunúmer: 106. Legu-Pullari. Legu-Pullari

Bílaverkfæri. Kertalyklasett skrall 16+21mm 5stk. Vörunúmer: 106. Legu-Pullari. Legu-Pullari Bílaverkfæri Kertalyklasett skrall 16+21mm 5stk 1 ratchet with flexible head 2 extension bars 45 + 75 mm 2 spark plug sockets 16 + 21 mm Vörunúmer: 106 Legu-Pullari drop forged chrome plated reversible

More information

Drawing A Crankcase. Drawing A Crankcase

Drawing A Crankcase. Drawing A Crankcase Drawing A Crankcase Drawing A Crankcase 1 1122 020 2101 1 Crankcase 2-18 2 9022 341 1300 2 Spline screw IS-M6x20 3 0000 988 5211 1 Connector 4 9371 470 2610 2 Cylindrical pin 5x18 5 0000 974 1200 1 Notched

More information

PROFILE FOR AUTOMOBILE LIFTERS

PROFILE FOR AUTOMOBILE LIFTERS CONSULTANTS ENGINEERS TRADERS FIRST TIME IN PAKISTAN Work With Water & Air Pressure PROFILE FOR AUTOMOBILE LIFTERS INTRODUCTION OF OUR COMPANY Now IPEX INDUSTRIAL PROJECTS EXPORT (PVT) LTD wanted to serve

More information

1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns

1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns STEERING COLUMN 1989 STEERING Jeep Steering Columns DESCRIPTION All models use collapsible steering columns. All columns have integral ignition switch and locking device. Optional tilt wheel is available

More information

A/C COMPRESSOR SERVICING Article Text 1991 Saab 9000 For Copyright 1997 Mitchell International Friday, October 15, :22PM

A/C COMPRESSOR SERVICING Article Text 1991 Saab 9000 For Copyright 1997 Mitchell International Friday, October 15, :22PM Article Text ARTICLE BEGINNING 1991 GENERAL SERVICING Compressor Service * PLEASE READ THIS FIRST * CAUTION: When discharging air conditioning system, use only approved refrigerant recovery/recycling equipment.

More information

Hammers & Dollies Panel Shaping Trim Windscreen PANEL & TRIM

Hammers & Dollies Panel Shaping Trim Windscreen PANEL & TRIM Hammers & Dollies Panel Shaping Trim Windscreen PANEL & TRIM 295 PANEL & TRIM HAMMERS & DOLLIES Hammers Panel Beating Premium trade quality range made from hickory timber handles (octagonal shape) and

More information

HAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES

HAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms

More information

Why Dynamic Toolboxes?

Why Dynamic Toolboxes? Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty

More information

Pullers, Reversible Twin Leg. Pullers, Reversible Triple Leg. Pullers. Internal / External Puller, 2-arm + 3-arm use

Pullers, Reversible Twin Leg. Pullers, Reversible Triple Leg. Pullers. Internal / External Puller, 2-arm + 3-arm use Pullers, Reversible Twin Leg - forged - chrome plated 7713 Puller, Reversible Twin Leg, 75 mm 7714 Puller, Reversible Twin Leg, 100 mm 7716 Puller, Reversible Twin Leg, 150 mm 7718 Puller, Reversible Twin

More information

SMF / DSF / DTF SMF / DSF / DTF 200

SMF / DSF / DTF SMF / DSF / DTF 200 2006 SMF / DSF / DTF 200 1 The drawings in this parts book have been scaled so that parts can be easily recognized. 1 CYLINDER ASSY 2 CYLINDER ASSY Ref # Part # Description 1 410 0001A CYLINDER HEAD COVER

More information

Screwdrivers, Nut Drivers and Accessories

Screwdrivers, Nut Drivers and Accessories Screwdrivers, Nut Drivers and Accessories Offering a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done

More information

Depth of opening / Clamping width / Clamping range. Drive sections. Slotted Cross-slotted PH. Cruciform PZ. Hexagon internal.

Depth of opening / Clamping width / Clamping range. Drive sections. Slotted Cross-slotted PH. Cruciform PZ. Hexagon internal. echnical Symbols 0 y N C M D! $ + m b n c o d p e r f M R N S O U R V Weight (total) Length (total) Length (total) Length (total) Length of blade Length of blade Width across flats (Nominal Width) Width

More information

Service Tools. Service and Repair Manual Model 900/950/990 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO.

Service Tools. Service and Repair Manual Model 900/950/990 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION ITEM PART NO. 12 1 3 2 4 5 8 10 6 7 9 11 14 24 12 13 17 22 29 18 23 25 19 26 15 20 27 21 16 22 33 37 38 32 31 36 30 34 35 40 41 42 43 ITEM PART NO. DESCRIPTION 1 9170 0231 30 LONG ALLEN KEY 2 9170 0737 20 3/32 PIN PUNCH

More information

Professional Insulated Tools Supporting Arc Flash Protection. Innovations that work. 10,000 Volt Tested 1000 Volt Rated

Professional Insulated Tools Supporting Arc Flash Protection. Innovations that work. 10,000 Volt Tested 1000 Volt Rated Professional Insulated Tools Supporting Arc Flash Protection Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Insulated Testing Procedure Arc Flash Protection: Wiha Insulated tools can be a vital

More information

D Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.

D Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120. D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece

More information

CATALOGUE SHOP ONLINE NOW

CATALOGUE SHOP ONLINE NOW CATALOGUE 2018 SHOP ONLINE NOW Avex has been supplying the aircraft industry since our inception in 1965 and has grown to be the single most comprehensive supplier of aviation tooling since 1994. The Avex

More information

Inspection & Diagnosis

Inspection & Diagnosis History The Rzeppa CV joint was patented by Alfred H. Rzeppa in 1928. These early designs had six tracks in the housing and race, and a cage with six balls just like the modern version. These early designs

More information

Spare Parts. board and intermediary trays. Table board, complete with indexing box and chain. with indexing box.

Spare Parts. board and intermediary trays. Table board, complete with indexing box and chain. with indexing box. Spare Parts SPAR PARTS / 1 4 SPAR PARTS / 1 4 For Tool Cabinet 111 Padlock with 2 keys 160-08 a 004294 For Work Bench 10 Leveling feet, 4 pieces, height continuously 10-F/4 0065 adjustable up to 40 mm

More information

TOOL WITH MAGNET Part No. AT135M. Long pickup tool with magnet and gripper. The magnet can be moved up if only the claw is required.

TOOL WITH MAGNET Part No. AT135M. Long pickup tool with magnet and gripper. The magnet can be moved up if only the claw is required. 72 TOOTH Flexible RATCHETS 5 0 between each click Extra teeth are engaged simultaneously allowing greater force Improved reverse mechanism Fully sealed ratchet head 1/4 DRIVE Part No. 1400-72SN $45 3/8

More information

ENGINE SERVICE ENGINE SERVICE KEY BELT CHAIN

ENGINE SERVICE ENGINE SERVICE KEY BELT CHAIN Cylinder Head Service & Engine Block 44-47 Auxiliary Belt 48 Clutch, Gearbox & Exhaust 49-50 Sparkplug & Diesel Injector Service 51 Diesel Injector Service & Removal 52-55 Oil Service 56-57 KEY P DO NOT

More information

ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY

ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005

More information

5000 CLT 6000 CT 7900 E INDEX Page

5000 CLT 6000 CT 7900 E INDEX Page INDEX 111 190 279 799 1 Legend & = News Tool Cabinets Work Benches, Tool Chests Toll Trolleys Assistent Accessories, Assortments Tool Boxes Wrenches, Hex-Nut Drivers, Open End Wrenches, Box End Wrenches,

More information

VECTRIX VX-2 SERVICE MANUAL. Version 1.0/May 2011 VECTRIX, LLC

VECTRIX VX-2 SERVICE MANUAL.   Version 1.0/May 2011 VECTRIX, LLC www.vectrix.com CONTENTS SECTION A: Tools 1 Tools Needed SECTION B: Mechanical Parts 1 Front Fairing 2 Front Console Cover 3 Speedometer Cover 4 Front Vertical Panel Cover-Lower 5 Front Vertical Panel

More information

2012 Expedition, Navigator Workshop Manual

2012 Expedition, Navigator Workshop Manual Item Part Number Description 1 W720586 Differential housing cover bolt (12 required) 2 4033 Differential housing cover 3 Differential bearing cap bolts (part of 4010) (4 required) 4 Differential bearing

More information

Measuring tools. Accuracy in measurement. Test-safe use. Multiple versions. Torque wrenches. Vernier calipers Spirit levels Mason s profiles

Measuring tools. Accuracy in measurement. Test-safe use. Multiple versions. Torque wrenches. Vernier calipers Spirit levels Mason s profiles Measuring tools Torque wrenches Vernier calipers Spirit levels Mason s profiles Try squares Feeler gauges Other measuring tools Measuring tapes Accuracy in measurement Measuring tapes, torque wrenches

More information

Minimally protruding jaw shank for greater capacity in tight spaces.

Minimally protruding jaw shank for greater capacity in tight spaces. Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional

More information

MISCELLANEOUS WOOD CHISEL

MISCELLANEOUS WOOD CHISEL MISCELLANEOUS WOOD CHISEL In hanger WOOD CHISEL SET - Grounded and lacquered blade - Hardened blade - Ergonomic bimaterial handle 74 0 3,0 74 3,8 744 4 3,9 74 3,99 748 4, 7 0 4,3 7 4,34 7 4,43 pieces -

More information

Allen keys, spanners. T-Handle socket wrenches 1000 V. Right angle allen keys 1000 V. T-handle allen keys 1000 V. Cross type socket wrenches 1000 V

Allen keys, spanners. T-Handle socket wrenches 1000 V. Right angle allen keys 1000 V. T-handle allen keys 1000 V. Cross type socket wrenches 1000 V Allen keys, spanners T-Handle socket wrenches 1000 V chrome vanadium steel, full insulated, for hexagon nuts, DIN 7440, Right angle allen keys 1000 V chrome vanadium steel, for hexagon socket screws, full

More information

AXLE. Innovation is our mission!

AXLE. Innovation is our mission! AXLE Innovation is our mission! 1 PAGE WHEEL BEARING SYSTEM PP I 518 HYDRAULIC SYSTEM PP II 518-520 ADAPTER 520 UNIVERSAL SPINDLE DRIVE 520 WHEEL BEARING ASSEMBLY SYSTEM PP II 521 WHEEL HUB DISASSEMBLY

More information

07 Sockets. 3/8 sq. dr. socket. 1/4 sq. dr. socket. 1/2 sq. dr. socket. Automotive socket. 1 sq. dr. socket. Insulated socket. 3/4 sq. dr.

07 Sockets. 3/8 sq. dr. socket. 1/4 sq. dr. socket. 1/2 sq. dr. socket. Automotive socket. 1 sq. dr. socket. Insulated socket. 3/4 sq. dr. 07 /4 sq. dr. socket 9 3/8 sq. dr. socket 34 / sq. dr. socket 36 Automotive socket 4 Insulated socket 44 3/4 sq. dr. socket 46 sq. dr. socket 48 Impact socket 49 /4 sq. dr. socket set Extending ratchet

More information

HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog # by Hurst Performance

HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog # by Hurst Performance FORM 159 0205 07/15 HURST COMP/PLUS SHIFTER 2015 Ford Mustang (Getrag MT82 six-speed manual transmission) Catalog #391 0205 2015 by Hurst Performance Thank you for purchasing the Hurst Comp/Plus Shifter.

More information

Specialist Auto Tools

Specialist Auto Tools The Parts Centre Ltd Contents Specialist Auto Tools 458 Torque Wrenches 460 Wheel Tools 461 Brake Tools 464 Removal Tools 466 Oil Filter Removal Tools 467 Windscreen Removal Tools 468 Inspection Tools

More information

DRIVE AXLE Volvo 960 DESCRIPTION & OPERATION AXLE IDENTIFICATION DRIVE AXLES Volvo Differentials & Axle Shafts

DRIVE AXLE Volvo 960 DESCRIPTION & OPERATION AXLE IDENTIFICATION DRIVE AXLES Volvo Differentials & Axle Shafts DRIVE AXLE 1994 Volvo 960 1994 DRIVE AXLES Volvo Differentials & Axle Shafts 960 DESCRIPTION & OPERATION All 960 station wagon models use type 1041 rear axle assembly. All 960 4-door models use type 1045

More information

Fastener Drive & Screwdriving

Fastener Drive & Screwdriving www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and

More information

IN-VEHICLE REPAIR. Differential Bearings. Rear Drive Axle/Differential Ford 7.5-Inch Ring Gear. Special Tool(s)

IN-VEHICLE REPAIR. Differential Bearings. Rear Drive Axle/Differential Ford 7.5-Inch Ring Gear. Special Tool(s) 205-02A-1 IN-VEHICLE REPAIR Differential Bearings Special Tool(s) Protector, Drive Pinion Thread 205-460 Special Tool(s) Installer, Differential Shim 205-220 (T85L-4067-AH) 205-02A-1 2-Jaw Puller 205-D072

More information

Valve gear, servicing

Valve gear, servicing Page 1 of 62 15-1 Valve gear, servicing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail if

More information

ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY

ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY 2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY 2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005

More information

Printed from MediaCat

Printed from MediaCat Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1119 020 2118 1 Crankcase (1,3,5) 2-11 1 1119 020 2109 1 Crankcase (6,8,9) 2-11 1 1119 020 2119 1 Crankcase (2,4)

More information

Professional Insulated Tools. Supporting Arc Flash Protection. Updated 3/1/10. Innovations that work. 10,000 Volt Tested 1000 Volt Rated

Professional Insulated Tools. Supporting Arc Flash Protection. Updated 3/1/10. Innovations that work. 10,000 Volt Tested 1000 Volt Rated Professional Insulated Tools Supporting Arc Flash Protection Updated 3/1/10 Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Toll Free: (800) 494-6104 Arc Flash Protection: Wiha Insulated tools

More information

$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle

$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7

More information

90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION.

90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION. 2013 90 Utility Model Number A2013KUB2BUSZ TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 90 (Model No. A2013KUB2BUSZ) BODY PANEL AND HEADLIGHT ASSEMBLY... 1 FRONT AND REAR RACK ASSEMBLY... 2 FRAME AND

More information