being disconnected, the plug must first be pushed further into the coupling before it can be disconnected. Plug Plug G mm G 1/ Standard
|
|
|
- Cori Howard
- 5 years ago
- Views:
Transcription
1 ow Pressure Safety actual size Single Shut-Off Nominal iameter RECTUS Series 5 = KS Technical escription Mini industrial coupling, the world s most coonly used profile. Above average flow performance for liquid and gaseous media. It also uses an additional safety locking system. This prevents unintentional disconnection. When being disconnected, the plug must first be pushed further into the coupling before it can be disconnected. Chart Air Advantages Small dimensions. The safety locking system prevents unauthorized disconnection. ust Caps (P. 323) for coupling Part.-No. SK16S Working Pressure P = 35 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -20 C up to +100 C (NR) -40 C up to +120/150 C (EPM) -15 C up to +200 C (FKM) 0 C up to +316 C (FFKM) depending on the medium. *At a temperature below -20 C and above +100 C special seals are available on request. You will find the following alternative versions in our current catalogue on page: Safety ouble Shut-off P. /Steel P. Stainless Steel P. Thermoplastics P. 266 Coded Systems P Pressure rop (bar) Pressure rop (bar) Water Material Coupling ack ody Valve ody Sleeve Valve Spring and ocking Rings ocking alls Seal NR,,, NR, Couplings RECTUS Series 21KS ISO ISO { { 1 1/ /4 3/8 M 12 x 1,5 M 14 x 1, KS AW10 MPX 21KS AW10 MPN 21KS AW13 MPX 21KS AW13 MPN 21KS AW17 MPX 21KS AW17 MPN 21KS A12 MPX 21KS A12 MPN 21KS A14 MPX 21KS A14 MPN 256 S = elivery Status: in stock on short call medium term delivery
2 Couplings RECTUS Series 21KS 1 1/ KS IW10 MPX 21KS IW10 MPN 1/ KS IW13 MPX 3/ KS IW13 MPN 21KS IW17 MPX 21KS IW17 MPN M 12 x 1, KS IM12 MPX 21KS IM12 MPN M 14 x 1, KS IM14 MPX 21KS IM14 MPN ow Pressure Safety Hose arb KS TF04 MPX 21KS TF04 MPN 21KS TF05 MPX 21KS TF05 MPN 21KS TF06 MPX 21KS TF06 MPN 21KS TF08 MPX 21KS TF08 MPN 21KS TF09 MPX 21KS TF09 MPN 21KS TF10 MPX 21KS TF10 MPN 4 x M 10 x 1 21KS KO06 MPX 21KS KO06 MPN 6 x M 12 x 1 21KS KO08 MPX 21KS KO08 MPN Plastic Hose Connection 4 x M 10 x 1 21KS KS06 MPX 21KS KS06 MPN 6 x M 12 x 1 21KS KS08 MPX 21KS KS08 MPN Panel Mount, Plastic Hose Connection M 10 x 1 21KS TS04 MPX 21KS TS04 MPN M 12 x 1 21KS TS05 MPX 21KS TS05 MPN Panel Mount, Hose arb M 12 x 1 21KS TS06 MPX Please consider our security advices on the pages 12/13 257
3 ow Pressure Safety 1 RECTUS Series 21KS 1/ SS AW10 MXX 21SS AW10 MXN 1/ SS AW13 MXX 21SS AW13 MXN 1/ SS IW10 MXX 21SS IW10 MXN 1/ SS IW13 MXX 21SS IW13 MXN RECTUS Series 21KS SS TF04 MXX 21SS TF04 MXN SS TF06 MXX 21SS TF06 MXN SS TF08 MXX 21SS TF08 MXN SS TF09 MXX Hose arb 21SS TF09 MXN SS TF10 MXX 21SS TF10 MXN S = elivery Status: in stock on short call medium term delivery 258
4 RECTUS Series SSV21 Technical escription The quick connect SSV21 fitting is IN-VW-approved, and meets test certificate N-4311 AQ All safety provisions and regulations according to IN 4815 part 5 (03.88) have been complied. Supplied complete with a protective cover and operating instructions. Range of application: P lines in vehicles. Advantages The quick connect coupling can only be separated from the plug after the shut-off valve has closed. ouble safety is guaranteed by the shut-off valve and the valve in the coupling. Working Pressure P = 4 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -20 C up to +100 C (NR) depending on the medium. In the range of VW authorisation: -10 C to +70 C (ambient temperature) Nominal iameter 20 2 = 5 55% of actual size Single Shut-Off ow Pressure Safety Chart Air Material Coupling ack ody Valve ody Sleeve Valve Spring and ocking Ring ocking alls Seals Protection Cap NR Thermoflex RA 3000 Pressure rop (bar) Shut-Off ody Membrane, O-Ring Twist rip Spindle Spring NR Nylon C 40 AISI 302 Couplings with valve RECTUS Series SSV21 H M 14 x 1, SSV21 AM14 RECTUS Series SSV21 H 6 IN 49, ,5 21SF T06 MXX ,5 21SF TZ08 MXX Hose arb Please consider our security advices on the pages 12/13 259
5 ow Pressure Safety actual size Single Shut-Off Nominal iameter RECTUS Series 7.8 = KS Technical escription Safety coupling with UltraFlo technology. High flow performance. Notable for robust design and steel sleeve used with large pneumatic consumers. Additional safety locking system. This safety lock prevents unintentional disconnection. To disconnect, the plug must first be pushed further into the coupling before it can be unlocked. Advantages Quality coupling with small dimensions and high flow rates. Safety locking system. ouble profiled plug design against wear of material during operation. Working Pressure P = 35 bar () P = 70 bar (with steel body and steel seal), maximum static working pressure with safety factor of 4 to 1. Working Temperature* -20 C up to +100 C (NR) -40 C up to +120/150 C (EPM) -15 C up to +200 C (FKM) 0 C up to +316 C (FFKM) depending on the medium. *At a temperature below -20 C and above +100 C special seals are available on request. Chart Air You will find the following alternative versions in our current catalogue on page: Safety ouble Shut-off P. Safety Self-Venting P. Coded Systems P. /Steel P Stainless Steel P. 180 Pressure rop (bar) Pressure rop (bar) Water Material Coupling ack ody Valve ody Sleeve Valve Spring and ock Ring ocking alls Seals istance Sleeve Spring Plate Steel, Nickel Pl. Steel Hardened, NR Steel Hardened, Zinc-Plated NR, Nickel Pl., Nickel Pl., Nickel Pl., Nickel Pl. NR, Nickel Pl. Couplings RECTUS Series 25KS 1 R 1/ , Nickel Pl. 25KS AK13 SPN 25KS AK13 PX 25KS AK13 PN R 3/ KS AK17 SPN 25KS AK17 PX, Nickel Pl. 25KS AK17 PN R 1/ KS AK21 SPN 25KS AK21 PX, Nickel Pl. 25KS AK21 PN 260 S = elivery Status: in stock on short call medium term delivery
6 Couplings 1 RECTUS Series 25KS 1/ KS IW13 SPN 3/ , Nickel Pl., Nickel Pl. 25KS IW13 PX 25KS IW13 PN 25KS IW17 SPN 25KS IW17 PX 25KS IW17 PN ow Pressure Safety 1/ KS IW21 SPN KS TF06 SPN KS TF08 SPN 25KS TF08 PX, Nickel Pl. 25KS TF08 PN KS TF09 SPN 25KS TF09 PX, Nickel Pl. 25KS TF09 PN Hose arb KS TF10 SPN 25KS TF10 PX, Nickel Pl. 25KS TF10 PN KS TF13 SPN 25KS TF13 PX, Nickel Pl. 25KS TF13 PN RECTUS Series 25KS 1 R 1/ SS AK10 SXZ R 1/ SS AK13 SXZ 1/ SS AW13 MXX 1/ , Nickel Pl. 26SS AW13 MXN R 3/ SS AK17 SXZ R 1/ SS AK21 SXZ Please consider our security advices on the pages 12/13 261
7 ow Pressure Safety 1 RECTUS Series 25KS 1/ SS IW13 SXZ 3/ SS IW17 SXZ 1/ SS IW21 SXZ RECTUS Series 25KS SS TF06 SXZ SS TF08 SXZ , Nickel Pl. 26SS TF08 MXN SS TF09 SXZ SS TF10 SXZ Hose arb SS TF13 SXZ S = elivery Status: in stock on short call medium term delivery 262
8 0,0 RECTUS Series 28KS Technical escription The 28KS safety coupling is the largest version of our safety range. The plug must be pushed further into the coupling before it can be disconnected, which prevents unintentional disconnection. The plug profile conforms with the CETOP RP 59 P-15 standard. Advantages Single handed operation. High quality coupling made of steel. Safety locking system. High flow rate due to the UltraFlo valve. ouble profiled plug design against wear of material during operation. Working Pressure P = 35 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -20 C up to +100 C (NR) -40 C up to +120/150 C (EPM) -15 C up to +200 C (FKM) depending on the medium. *At a temperature below -20 C and above +100 C special seals are available on request. Nominal iameter 85 2 =10.5 actual size Single Shut-Off ow Pressure Safety Chart Air Material Coupling ack ody Valve ody Sleeve Valve Spring and ocking Rings ocking alls Seals, Steel, Steel Hardened, NR 1,2 Pressure rop (bar) 1,0 0,8 0,6 0,4 0,2 28KS Steel Hardened, Couplings RECTUS Series 28KS R 1/ , KS AK21 SPN R 3/ , KS AK26 SPN R 3/ , KS IW17 SPN R 1/ , KS IW21 SPN R 3/ , KS IW26 SPN , KS TF13 SPN , KS TF16 SPN , KS TF19 SPN Hose arb Please consider our security advices on the pages 12/13 263
9 ow Pressure Safety 1 RECTUS Series 28KS R 3/ SS AK17 SXN R 1/ SS AK21 SXN 3/ SS IW17 SXN 1/ SS IW21 SXN 3/ SS IW26 SXN RECTUS Series 28KS SS TF10 SXN SS TF13 SXN Hose arb SS TF16 SXN SS TF19 SXN S = elivery Status: in stock on short call medium term delivery 264 Please consider our security advices on the pages 12/13
10 ow Pressure Safety Allow us to present: your new safety representative. Our self-venting coupling system in series 26KE reliably prevents the dangerous whiplash effect. 265
Dust Caps (P. 323) for coupling Part.-No. SK16S. Plug Plug. G mm G 1/ Standard. D mm. L1 mm. L mm. Hex1 mm. L2 mm
actual size Single Shut-Off You will find the following alternative versions in our current catalogue on page: Nominal iameter RECTUS Series 5 = 20 2 21KA /Steel ouble Shut-off P. Stainless Steel P. Thermoplastics
Single. Working Pressure** 35 bar ** maximum static working pressure with safety factor 4 to bar. Air. Pressure Drop (bar) Water
ow Pressure rass/steel Nominal iameter 7,2 = 40 ² Technical escription Universal brass coupling with European standard industrial profile. Coupling system with single-hand operation and standard-valve.
Single KA Shut-Off. Working Pressure** 35 bar ** maximum static working pressure with safety factor 4 to bar
ow Pressure rass/steel Nominal iameter 10 = 80 ² Technical escription Series 1800 is used mainly for applications in the area of compressed air and liquids. The coupling system stands out for its robust,
Couplings - Quick Disconnect
ouplings - Quick isconnect Hydraulic - eneral Purpose... -1-3, -6 Hydraulic - Non Spill...-4-6 Pneumatic - eneral Purpose Manual onnect...-7-9 Pneumatic - eneral Purpose Push-to-onnect...-1-13 Industrial
ay Manifold Mounted KHP3K
3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting
Pneumatic Catalogue 2012
Pneumatic Catalogue 2012 Quick Coupling Systems for Pneumatic and Fluid Handling Structure of Part Numbers Hose Connection TF = Hose Barb TH = Hose Barb 45 TR = Hose Barb 90 TZ = Straight shaft parallel
Technical Description The series 6600 couplings meet the requirements and dimensions of the ISO A standard.
ISO- Polígono Industrial Eitua, nº 52, Pab. 5-. 48240 BERRIZ (BIZKI) Tel.: 94 623 60 10 / Fax: 94 623 60 11 E-mail: airtalde@airtalde.es www.airtalde.es Ball ocking ISO Standard ISO ISO 7241-1 Series 1/4"
Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
Globe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
Schrader Range. Pneumatic. Quick Acting Pneumatic Couplings Schrader original range InterCheck range Mini range Euro range. Catalogue 2167GB-ca
Pneumatic Schrader Range Quick cting Pneumatic Couplings Schrader original range InterCheck range Mini range Euro range Catalogue 2167G-ca Quick cting Couplers Overview Quick cting Couplers The self sealing
Pneumatic Quick Couplings
Pneumatic Quick ouplings -1 maku GmbH & o. KG 73630 Remshalden Telefon (0 71 51) 7 26 26 Telefax (0 71 51) 7 42 01 www.maku-industrie.de Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single
Tri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
DeZURIK KSL-LA SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1B JUNE 2015 ezuri SL-LA SLURRY NIFE GATE VALVES TECNICAL SPECIFICATIONS www.dezurik.com Materials of Construction Item escription Material A1 Body uctile Iron, ASTM A536, Grade 65-45-12
Temp Secure. Temperature Control Quick Connect Coupling System with Automatic Locking Mechanism MADE IN GERMANY SINCE PAT E N T P E N D I N G
Since 130. The perfect connection. PAT E N T P E N I N G Temp Secure Temperature Control Quick Connect Coupling System with Automatic ocking Mechanism MAE IN GERMANY SINCE 130. TempSecure Safety without
Male x Male Nipple. Reducing Bush. Hose Tail Barb. Accessories Plastic fittings. Low Pressure Components. L mm. HEX1 mm. G mm
ow Pressure Components ccessories Plastic fittings Male x Male Nipple HEX 1 HEX1 1 2 3 POM design CHEM design 1/4 1/8 14 19 8 7 DN13/10DX DN13/10FX 1/4 1/4 14 19 8 7 DN13/13DX DN13/13FX 3/8 1/4 17 28,5
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
The most extensive range of coupling systems and accessories for temperature control applications
Quick Connect Couplings and Accessories for Temperature Control Applications Product Range 2017 The most extensive range of coupling systems and accessories for temperature control applications Plastics
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA July 202 Locations Grantsburg, WI Chetek, WI FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS
Quick Coupling Products
Quick oupling Products atalog 3800 US February 2005 The World Standard Parker Locations Minneapolis, Minnesota rantsburg, Wisconsin Lincoln, Nebraska hetek, Wisconsin FILURE OR IMPROPER SELETION OR IMPROPER
Globe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Sanitary Valves JSB Series Back Pressure Valves
3L/T-2R/S33 Series JS Series Compact, High Purity ack Pressure Regulating Valve J-Pure is the first fully drainable compact back pressure regulator designed and built specifically for hygienic, ASME PE
Complete Hydraulic Set System 100
Diagnostics System 100 Measuring-System System 100 Technical The design of the Tema System 100 allows the check of static and dynamic pressures as well as vacuum. With the integrated self-venting device
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
AAA Metal Suppliers ABN The balustrade and marine supply specialists. Quality Stainless Steel Fittings. Contact us for a quote
Metal Suppliers N 80 076 379 587 The balustrade and marine supply specialists Quality Stainless Steel Fittings Contact us for a quote We guarantee to beat any quoted price by 10% for stock items Phone:
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN 10/16, INTEGRAL SEAT, IP 67 GEARBOX WITH HANDWHEEL
AVK OUBE EENTRI BUTTERFY VAVE, PN 10/16, INTEGRA SEAT, IP 67 GEARBOX WITH HANWHEE 00 019 ouble eccentric butterfly valve, for water to max. 70, designed according to EN 593, Face to face according to EN
Series 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds
Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Table of Contents. Quick Coupling Products
Quick oupling Products Table of ontents Table Of ontents...1 Fluid Quick ouplings...3 oupling Selection uide...4 Non-Spill ouplings...5 FS Series...5 ouplers...6 Nipples...7 FS Series ust aps & Plugs...8
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
Pneumatic Valves Viking Lite Series. G1/8 - G3/8 body ported
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Valves Series G1/8 - G3/8 body ported Catalogue May 2015
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
Fittings and Accessories. For oil and grease. For Centralized Lubrication Systems and General Use
Fittings and Accessories For oil and grease. For Centralized ubrication Systems and General Use Fittings and Accessories This brochure provides an overview of metallic pipe unions for luid engineering.
Tube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
-H- Note. Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
Quick Couplings. Section F
Quick ouplings Section conomatic Quick onnect...2-3 Sleevmatic...4-6...7-8 conomatic Quick onnect ouplings...9-10 Pneumatic ivision 1 Richland, Michigan Pneumatic Products irline ccessories Numbers & imensions
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Pneumatic Products. Synonymous with quality, high performance and safety. pneumatics
Pneumatic Products Synonymous with quality, high performance and safety pneumatics With close to 60 years in business CEJN can be found in every corner of the world and we re proud to say we re still made
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
PNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
Angle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
Single-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
Robolux Multiway Multiport Diaphragm valve, standard product range
Robolux Multiway Multiport Diaphragm valve, standard product range Increased process efficiency Reduced installation costs, minimal place required Reduced number of valves and welds Zero dead volume and
Valves with a difference. Thin Wafer. Check Valves DVC INTERNATIONAL
Valves with a difference Thin Wafer Check Valves VC INTERNATIONAL With VC as your business partner, you are always guarenteed a wide and well sorted product range and a unique technical know-how Product
ABV21i and ABV40i Air Actuated Boiler Blowdown Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flame hardening steel. The height from the reference hole to the surface of the reference support block can be selected from 2 types HIGH or LOW.
is separated from the reference. INFORMTION Responses to reduction of spare parts, short lead times, and a drastic reduction of special orders Pin Plate ylinder ( machinable type) 1 HIGH type Flame hardening
Quick Coupling Products
Quick Coupling Products Quick Couplings, Swivels, Valves, Diagnostic Equipment Catalog 3800 USA February 2014 Locations Grantsburg, WI Chetek, WI Union City, PA FAILURE OR IMPROPER SELECTION OR IMPROPER
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
Control Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
VOFXSERIES INTERCHANGE > Similar Couplings (Oil & Gas)
VOXSRIS IRCA > Similar Couplings (Oil & as) CICAL AURS A OPIOS Interchange Similar Couplings (Oil & as) Available sizes rom to Sealing description itrile R aterial Stainless steel (AISI 316L) Connection
HY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue
HY-SPEC CATALOGUE - HYDRAULIC VALVES Hydraulic Valves Catalogue Visit our website HY-SPEC PRODUCT FAMILY HY-SPEC CATALOGUE - AC/DC POWER PACKS HY-SPEC CATALOGUE - GAS ENGINE PRODUCTS Accessories AC/DC
Pressure reducing valve, pilot operated Type DR
RE 6 9/0.0 Replaces: 0.0 Pressure reducing valve, pilot operated Type DR Nominal sizes 0 to Series Maximum operating pressure 0 bar Maximum flow 00 L/min K660-9 Type DR 0--/... Overview of contents Features
SSV-B Sampling Ball Valves plastomer-lined / SS PM 82 e / Modular Design
DN15 DN150 resp. ½" 6" full-port design for safe and representative sampling of aggressive or even toxic liquids from pressurized pipelines or vessels, without any process interruptions. Modular Design
CM15-1 A-R-I-V-AQQV C-A-A-N
GRUNDFOS DATA BOOKLET CM15-1 A-R-I-V-AQQV C-A-A-N Grundfos Pump 97515 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97515/cm15-1-a-r-i-v-aqqv.html
Manifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
Speed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
INDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin
INDUSTRY PROCESS AND AUTOMATION SOLUTIONS Technical Bulletin Guidelines for selection of planetary gear units of the 300- INDUSTRIAL series for installation in hazardous areas, classified by Directive
Presentation, Application Severe Duty Limit Switches Mill and Foundry Switches Conforming to NEMA A600 and UL508
Presentation, pplication Severe uty Limit Switches 0 onforming to NEM 600 and UL508 escription 9007T Mill Switches Use the 9007T Mill switches instead of other limit switches in the following applications:
Air Filter. Best Pneumatics 4. Equipment. Air Line
est Pneumatics Air Filter Air Filter: AF000 to 6000 P..- Mist Separator: AFM000/000/00 P..-6 Micro Mist Separator: AF000/000/00 P..-9 Large Flow Air Filter: AF00/0 P..- Air Line Equipment.-0 Modular Style
DatA sheet. D-2011/05/ Date: 02/2013. Type TK10 CNG. CNG Fuelling Nozzle. for cars FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type CNG Fuelling Nozzle for cars FUTURE. TECHNOLOGY. TODAY. Type Fuelling nozzle for cars General Description Ball valve Sliding sleeve 1 Hand grip TK4 CNG
D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
RADIATOR VALVES / RADIATOR VALVES WITH PRESETTING
RAIATOR VAVES / RAIATOR VAVES WITH PRESETTING THERMOSTATIC RAIATOR VAVES WITH PRESETTING Thermostatic radiator valve primary for radiators in heating systems and secondary for small cooling terminals.
Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
BULLETIN D NOVEMBER DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS
BULLETIN 52.00-1D NOVEMBER 2016 DeZURIK KSL-SD SLURRY KNIFE GATE VALVES TECHNICAL SPECIFICATIONS Materials of Construction Item Description Material A1 Body Ductile Iron, ASTM A395, Grade 65-45-15, ASTM
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
VERTICAL MULTISTAGE PUMPS SSV-F Hz
VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar
RC /
3 Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics 09.96 DZ 10,, 3 31 bar 600 L/min K 663- DZ 0 --/31M 1 3 6 7 DIN
Valve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
Inline Sampling Valves SSV Series, full-port design
SSV: Product Info 81 Inline Sampling Valves, full-port PM 81 M.00 e Inline Sampling Valves SSV Series, full-port design for safe and representative sampling of aggressive or even toxic liquids from pipelines
Data Sheet * * Differential pressure - Measuring device Pressure levels PN40/PN100. Important features. Application scopes
*09005393* DB_EN_DA03_GK_HL Rev.B 09/13 *09005393* d e v e l o p i n g s o l u t i o n s DA03 Data Sheet Differential pressure - Measuring device Pressure levels PN40/PN100 The differential pressure -
Type 5411, Operating Instructions. Bedienungsanleitung Manuel d utilisation
Type 5411, 5413 3/2 or 4/2 way solenoid valve 3/2 oder 4/2-Wege-Magnetventil Électrovanne 3/2 ou 4/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 THE OPERATING INSTRUCTIONS The
6-8 Stainless Steel Submerged Centrifugal Pump
6 & 8 BHE(L) 6-8 Submerged Centrifugal Pump IMENSION PUMP 8BHE 77 imension (mm) 86 BHE 77-2 86 BHE 77-3 86 BHE 77-4 86 BHE 77-5 86 BHE 77-6 86 BHE 77-7 86 BHE 77-8 86 BHE 77-9 86 BHE 77-10 86 BHE 77-11
Valve Products Viking Lite Valves
atalog 0697- arker neumatic alve roducts iking ite alves The iking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or /8
Product Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
Angle seat valve with piston actuator VZXA-...-K
Angle seat valve with piston actuator VZXA-...-K Festo AG & Co. KG Postfach 73726 Esslingen Germany +49 711 347-0 www.festo.com 3 Further information Accessories www.festo.com/catalogue Spare parts www.festo.com/spareparts
For High Pressure Applications
For High Pressure pplications SELEXCEL Swivels joints have been carefully designed and manufactured with continuous research and development backing to very close tolerances under rigid quality control
INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4
591 INDUSTRIAL VALVES BRASS BALL VALVES PLUS WIDE SOLUTIONS ACCORDINGLY TO EVERY KIND OF APPLICATION OPTIMIZED DIMENSIONS & PERFORMANCES THREAD UP TO 4 INDUSTRIAL VALVES / BRASS BALL VALVES 592 BRASS EUROPE
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
Minimal Fitting Series
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUE MAKE-TO-ORDER PRODUCTS Ultra-Small arb Fitting for Pneumatic Piping Fitting 266 Suitable for Vacuum Piping by a Combination with Vacuum Tube Suitable
3 (R) 1 (P) 5 (S) Port size 1 (P) 2 (A) 3 (R) 4 (B) 5 (S)
XSz 8V & XSz 0V 5/ directional control valve with dynamic monitoring For mechanical presses and other safety applications G/4, G/, /4 NPT & / NPT Inherently fail-safe without residual pressure Dynamic
21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
Pneumatic rotary drive
Pneumatic rotary drive Modular program for mounting of quarter turn valves such as ball valves and butterfly valves NMUR and ISO 5211 interfaces Position feedback (including Ex-Versions) Type 2051 can